Enzymatic degradation of multiwalled carbon nanotubes

ClO-driven degradation of graphene oxide: new insights from DFT calculations

We present an extensive investigation using density functional theory (DFT) calculations on various model graphene oxide (GO) nanostructures interacting with chlorine monoxide ClO, aiming to understand the role of this highly oxidizing species in C-C bond breakage and the formation of significant holes on GO sheets. During its function, the myeloperoxidase (MPO) enzyme abundantly generates chlorine-oxygen-containing species and their presence has been identified as the cause of degradation in carbon nanotubes of diverse sizes, morphologies, and chemical compositions, both in in vivo and in vitro samples. Notably, Kurapati et al. (Small, 2015, 11, 3985-3994) demonstrated efficient degradation of single GO monolayers through MPO catalysis, though the exact degradation mechanism remains unclear. In our study, we discover that breaking C-C bonds in a single graphene oxide sheet is achievable through a simple mechanism involving the dissociation of two ClO molecules that are chemically attached as nearest neighbor species but bonded to opposite sides of the GO layer (up/down configuration). Two new carbonyl oxygens appear on the surface and the Cl atoms can be transferred to the carbon layer or as physisorbed species near the GO surface. Relatively small energy barriers are associated with these molecular events. Continuing this process on neighboring sites leads to the presence of larger holes on the GO surface, accompanied by an increase in carbonyl species on the carbon network, consistent with X-ray photoelectron spectroscopy measurements. Indeed, the distribution of oxygen functionalities is found to be crucial in defining the damage pattern induced in the carbon layer. We emphasize the important role played by the local charge distribution in the stability or instability of chemical bonds, as well as in the energy barriers and reaction pathways. Finally, we explore the possibility of achieving chlorination of GO following MPO exposure. The here-reported predictions could be the root cause of the experimentally observed low stability of individual GO sheets during the MPO catalytic cycle.

Application of Nanomaterials in the Production of Biomolecules in Microalgae: A Review

Nanomaterials (NMs) are becoming more commonly used in microalgal biotechnology to empower the production of algal biomass and valuable metabolites, such as lipids, proteins, and exopolysaccharides. It provides an effective and promising supplement to the existing algal biotechnology. In this review, the potential for NMs to enhance microalgal growth by improving photosynthetic utilization efficiency and removing reactive oxygen species is first summarized. Then, their positive roles in accumulation, bioactivity modification, and extraction of valuable microalgal metabolites are presented. After the application of NMs in microalgae cultivation, the extracted metabolites, particularly exopolysaccharides, contain trace amounts of NM residues, and thus, the impact of these residues on the functional properties of the metabolites is also evaluated. Finally, the methods for removing NM residues from the extracted metabolites are summarized. This review provides insights into the application of nanotechnology for sustainable production of valuable metabolites in microalgae and will contribute useful information for ongoing and future practice.

The effect of biotransformation of sewage sludge- and willow-derived biochars by horseradish peroxidase on total and freely dissolved polycyclic aromatic hydrocarbon content

This study analyzed the effect of enzymatic aging (horseradish peroxidase) of biochars on their content of solvent extractable (Ctot) and freely dissolved (Cfree) polycyclic aromatic hydrocarbons (PAHs). Physicochemical properties and phytotoxicity of pristine and aged biochars were also compared. The study used biochars obtained at 500 or 700 °C from sewage sludges (SSLs) or willow. Compared to SSL-derived biochars, willow-derived biochars were more susceptible to enzymatic oxidation. Aging increased the specific surface area and pore volume of most SSL-derived biochars. An opposite direction, however, was found in the willow-derived biochars. Low-temperature biochars, regardless of their feedstock, underwent physical changes, such as removal of labile ash components or degradation of aromatic structures. The enzyme caused an increase in the content of Ctot light PAHs in biochars (by 34-3402 %) and heavy PAHs (≥4 rings) in the low-temperature SSL-derived biochars (by 46-713 %). In turn, the content of Cfree PAHs decreased in aged SSL-derived biochars (by 32-100 %). In the willow-derived biochars the bioavailability of acenaphthene increased (by 337-669 %), while the immobilization degree of some PAHs was lower (25-70 %) compared to the SSL-derived biochars (32-83 %). Nevertheless, aging positively affected the ecotoxicological properties of all biochars by increasing their stimulation effects or removing their phytotoxic effects on both Lepidium sativum seed germination and root growth. Significant relationships between the changes in Cfree PAH content, pH and salinity of SSL-derived biochars and seed germination/root growth inhibition were found. The study demonstrates that the risk associated with application of SSL-derived biochars, regardless of the type of SSL and pyrolysis temperature, can be lower in terms of Cfree PAHs than in the case of willow-derived biochars. Regarding to Ctot PAHs, high-temperature SSL-derived biochars are safer than low-temperature ones. In the case of application of high-temperature SSL-derived biochars, these with moderate alkalinity and salinity will not bring risks for plants.

A new capacity of gut microbiota: Fermentation of engineered inorganic carbon nanomaterials into endogenous organic metabolites

Carbon-based nanomaterials (CNMs) have recently been found in humans raising a great concern over their adverse roles in the hosts. However, our knowledge of the in vivo behavior and fate of CNMs, especially their biological processes elicited by the gut microbiota, remains poor. Here, we uncovered the integration of CNMs (single-walled carbon nanotubes and graphene oxide) into the endogenous carbon flow through degradation and fermentation, mediated by the gut microbiota of mice using isotope tracing and gene sequencing. As a newly available carbon source for the gut microbiota, microbial fermentation leads to the incorporation of inorganic carbon from the CNMs into organic butyrate through the pyruvate pathway. Furthermore, the butyrate-producing bacteria are identified to show a preference for the CNMs as their favorable source, and excessive butyrate derived from microbial CNMs fermentation further impacts on the function (proliferation and differentiation) of intestinal stem cells in mouse and intestinal organoid models. Collectively, our results unlock the unknown fermentation processes of CNMs in the gut of hosts and underscore an urgent need for assessing the transformation of CNMs and their health risk via the gut-centric physiological and anatomical pathways.

Graphdiyne oxide elicits a minor foreign-body response and generates quantum dots due to fast degradation

Graphdiyne (GDY) is a novel two-dimensional (2D) carbon allotrope that has attracted much attention in materials, physics, chemistry, and microelectronics for its excellent properties. Much effort has been devoted to exploring the biomedical applications of GDY in 2D carbon nanomaterials, especially for smart drugs and gene delivery. However, few studies have focused on the biocompatibility and potential environmental hazards of GDY and its derivatives. In this study, graphdiyne oxide (GDYO) and graphene oxide (GO) were obtained using different oxidation methods. Their cytotoxicity and hemolysis in vitro and biocompatibility in subcutaneous and peritoneal locations in vivo were compared. GDYO had very low biotoxicity in vitro and was moderately biocompatible in the muscle and abdominal cavity in vivo. Highly oxidized products and graphdiyne quantum dots (GDQDs) were observed in peritoneal cells. GDYO had better biocompatibility and its sheet size was easily diminished through oxidative degradation. Therefore, GDYO is a good candidate for use in 2D carbon nanomaterials in biomedicine.

A dual-response drug delivery system with X-ray and ROS to boost the anti-tumor efficiency of TPZ via enhancement of tumor hypoxia levels

The selective anti-tumor activity and less toxic nature of hypoxia-activated prodrugs including tirapazamine (TPZ) are harbored by hypoxia levels in tumors, the inadequacy of which leads to failure in clinical trials. Thus, the development of effective clinical applications of TPZ requires advanced strategies to intensify hypoxia levels in tumors effectively and safely. In this study, we designed and fabricated a paclitaxel (PTX)-loaded dual-response delivery system with a low dose (e.g., 2 Gy) of X-ray and reactive oxygen species on the basis of diselenide block copolymers. Upon the external X-ray stimulus, the system accurately released encapsulated PTX at tumor sites and remarkably improved tumor hypoxia levels by causing severe damage to tumor blood vessels. Subsequently, these enhanced tumor hypoxia levels effectively activated the reduction of TPZ into benzotriazinyl free radicals, which significantly improved the antitumor efficacy of our system against 4T1 breast cancer cells with an initial tumor volume of 500 mm³. Moreover, the dual-stimulus coordinated and controlled release of PTX was found to largely avoid the off-target effects of PTX on normal cells while exhibiting very limited side effects in experimental mice. The current novel strategy for regulating tumor hypoxia levels offers an effective and safe way to activate TPZ for the treatment of large solid tumors.

Assessment of Pristine Carbon Nanotubes Toxicity in Rodent Models

Carbon nanotubes are increasingly used in nanomedicine and material chemistry research, mostly because of their small size over a large surface area. Due to their properties, they are very attractive candidates for use in medicine and as drug carriers, contrast agents, biological platforms, and so forth. Carbon nanotubes (CNTs) may affect many organs, directly or indirectly, so there is a need for toxic effects evaluation. The main mechanisms of toxicity include oxidative stress, inflammation, the ability to damage DNA and cell membrane, as well as necrosis and apoptosis. The research concerning CNTs focuses on different animal models, functionalization, ways of administration, concentrations, times of exposure, and a variety of properties, which have a significant effect on toxicity. The impact of pristine CNTs on toxicity in rodent models is being increasingly studied. However, it is immensely difficult to compare obtained results since there are no standardized tests. This review summarizes the toxicity issues of pristine CNTs in rodent models, as they are often the preferred model for human disease studies, in different organ systems, while considering the various factors that affect them. Regardless, the results showed that the majority of toxicological studies using rodent models revealed some toxic effects. Even with different properties, carbon nanotubes were able to generate inflammation, fibrosis, or biochemical changes in different organs. The problem is that there are only a small amount of long-term toxicity studies, which makes it impossible to obtain a good understanding of later effects. This article will give a greater overview of the situation on toxicity in many organs. It will allow researchers to look at the toxicity of carbon nanotubes in a broader context and help to identify studies that are missing to properly assess toxicity.

Colloidal Behavior and Biodegradation of Engineered Carbon-Based Nanomaterials in Aquatic Environment

Carbon-based nanomaterials (CNMs) have attracted a growing interest over the last decades. They have become a material commonly used in industry, consumer products, water purification, and medicine. Despite this, the safety and toxic properties of different types of CNMs are still debatable. Multiple studies in recent years highlight the toxicity of CNMs in relation to aquatic organisms, including bacteria, microalgae, bivalves, sea urchins, and other species. However, the aspects that have significant influence on the toxic properties of CNMs in the aquatic environment are often not considered in research works and require further study. In this work, we summarized the current knowledge of colloidal behavior, transformation, and biodegradation of different types of CNMs, including graphene and graphene-related materials, carbon nanotubes, fullerenes, and carbon quantum dots. The other part of this work represents an overview of the known mechanisms of CNMs' biodegradation and discusses current research works relating to the biodegradation of CNMs in aquatic species. The knowledge about the biodegradation of nanomaterials will facilitate the development of the principals of "biodegradable-by-design" nanoparticles which have promising application in medicine as nano-carriers and represent lower toxicity and risks for living species and the environment.

Nitrogen-Doped Carbon Nanotube Cups for Cancer Therapy

Carbon nanomaterials have attracted significant attention for a variety of biomedical applications including sensing and detection, photothermal therapy, and delivery of therapeutic cargo. The ease of chemical functionalization, tunable length scales and morphologies, and ability to undergo complete enzymatic degradation make carbon nanomaterials an ideal drug delivery system. Much work has been done to synthesize carbon nanomaterials ranging from carbon dots, graphene, and carbon nanotubes to carbon nanocapsules, specifically carbon nanohorns or nitrogen-doped carbon nanocups. Here, we analyze specific properties of nitrogen-doped carbon nanotube cups which have been designed and utilized as drug delivery systems with the focus on the loading of these nanocapsules with specific therapeutic cargo and the targeted delivery for cancer therapy. We also summarize our targeted synthesis of gold nanoparticles on the open edge of nitrogen-doped carbon nanotube cups to create loaded and sealed nanocarriers for the delivery of chemotherapeutic agents to myeloid regulatory cells responsible for the immunosuppressive properties of the tumor microenvironment and thus tumor immune escape.

Insights on the Dynamics and Toxicity of Nanoparticles in Environmental Matrices

The manufacturing rate of nanoparticles (10–100 nm) is steadily increasing due to their extensive applications in the fabrication of nanoproducts related to pharmaceuticals, cosmetics, medical devices, paints and pigments, energy storage etc. An increase in research related to nanotechnology is also a cause for the production and disposal of nanomaterials at the lab scale. As a result, contamination of environmental matrices with nanoparticles becomes inevitable, and the understanding of the risk of nanoecotoxicology is getting larger attention. In this context, focusing on the environmental hazards is essential. Hence, this manuscript aims to review the toxic effects of nanoparticles on soil, water, aquatic, and terrestrial organisms. The effects of toxicity on vertebrates, invertebrates, and plants and the source of exposure, environmental and biological dynamics, and the adverse effects of some nanoparticles are discussed.

Enzymatic and Cellular Degradation of Carbon-Based Biconcave Nanodisks

The assessment of the biodegradability of nanomaterials is of pragmatic importance for understanding the interactions between nanomaterials and biological systems and for the determination of ultimate fate of these materials as well as their potential use. We recently developed carbon-based biconcave nanodisks (CBBNs) serving as a versatile nanocarrier for enhanced accumulation in tumors and combined photothermal-chemotherapy. Here, we investigate both the enzymatic and cellular degradation of CBBNs by monitoring their cellular response with electron microscopy, near-infrared absorbance spectroscopy, and cell viability and oxidative stress assessments. Our results show that CBBNs underwent significant degradation in solutions catalyzed by horseradish peroxidase (HRP) and hydrogen peroxide (H₂O₂), or in the presence of macrophage cells. The ability of CBBNs to be degraded in biological systems provides suitability for their future biomedical applications.

Vertically Aligned Carbon Nanotubes as a Unique Material for Biomedical Applications

Vertically aligned carbon nanotubes (VACNTs), a unique classification of CNT, highly oriented and normal to the respective substrate, have been heavily researched over the last two decades. Unlike randomly oriented CNT, VACNTs have demonstrated numerous advantages making it an extremely desirable nanomaterial for many biomedical applications. These advantages include better spatial uniformity, increased surface area, greater susceptibility to functionalization, improved electrocatalytic activity, faster electron transfer, higher resolution in sensing, and more. This Review discusses VACNT and its utilization in biomedical applications particularly for sensing, biomolecule filtration systems, cell stimulation, regenerative medicine, drug delivery, and bacteria inhibition. Furthermore, comparisons are made between VACNT and its traditionally nonaligned, randomly oriented counterpart. Thus, we aim to provide a better understanding of VACNT and its potential applications within the community and encourage its utilization in the future.

Synthesis of physically crosslinked PAM/CNT flakes nanocomposite hydrogel films via a destructive approach

Carbon nanotube (CNT)-based hydrogels have recently found a wide variety of applications due to the unique physical and chemical properties of CNTs. CNTs can be used as a nanofiller and/or crosslinker to produce nanocomposite hydrogels with good mechanical and structural properties. In this research, a novel method was reported for producing polyacrylamide (PAM)/oxidized-multiwalled carbon nanotube (O-MWCNT) flakes nanocomposite hydrogel films without using any organic cross-linker or surfactant. Through a mechanism dependent on the reactive oxygen species (ROS), some O-MWCNTs were broken down in situ into small flakes in the aqueous solutions containing acrylamide (AM) and sodium persulfate (NaPS) at the temperature range of 85–90 °C. Simultaneously, in situ polymerization of the AM monomers occurred using free radicals, which resulted in the formation of PAM chains. The flakes acted as crosslinkers by forming hydrogen bonds with PAM chains and formed a hydrogel network after 48 h at room temperature. The hydrogels were characterized by different techniques (FT-IR, Raman, FE-SEM, TEM, TGA, tensile test). The porous structure of the hydrogel films as well as micro-network structures with unique morphologies were observed by SEM. The O-MWCNT flakes and some undegraded O-MWCNTs in the hydrogel network were also observed by TEM. The results showed that PC₂I₂H hydrogel film, as an evolved hydrogel, has excellent swelling performance in aqueous solutions at different pH and temperatures. In addition, this hydrogel showed a tensile strength of 103 MPa in the dry state and an elongation of 703% in the swollen state.

Novel PAM/CNT flakes nanocomposite hydrogel films were synthesized by in situ degradation of the oxidized-MWCNTs into flakes using persulfate activation. The flakes crosslinked the PAM chains via hydrogen bonding to form a hydrogel network.

Physical and chemical properties of carbon nanotubes in view of mechanistic neuroscience investigations. Some outlook from condensed matter, materials science and physical chemistry

The open border between non-living and living matter, suggested by increasingly emerging fields of nanoscience interfaced to biological systems, requires a detailed knowledge of nanomaterials properties. An account of the wide spectrum of phenomena, belonging to physical chemistry of interfaces, materials science, solid state physics at the nanoscale and bioelectrochemistry, thus is acquainted for a comprehensive application of carbon nanotubes interphased with neuron cells. This review points out a number of conceptual tools to further address the ongoing advances in coupling neuronal networks with (carbon) nanotube meshworks, and to deepen the basic issues that govern a biological cell or tissue interacting with a nanomaterial. Emphasis is given here to the properties and roles of carbon nanotube systems at relevant spatiotemporal scales of individual molecules, junctions and molecular layers, as well as to the point of view of a condensed matter or materials scientist. Carbon nanotube interactions with blood-brain barrier, drug delivery, biocompatibility and functionalization issues are also regarded.

Intravenous administration of three multiwalled carbon nanotubes to female rats and their effect on urinary biochemical profile

This study was conducted to investigate the influence of outer diameter (OD) and length (L) of multiwalled carbon nanotubes (MWCNTs) on biodistribution and the perturbation of endogenous metabolite profiles. Three different-sized carboxylated MWCNTs (NIEHS-12-2: L 0.5-2 μm, OD 10-20 nm, NIEHS-13-2: L 0.5-2 μm, OD 30-50 nm, and NIEHS-14-2: L 10-30 μm, OD 10-20 nm) in water were administered to female Sprague-Dawley rats as a single intravenous dose of 1 mg/kg MWCNTs. Biodistribution in liver, lung, spleen, and lymph nodes was evaluated in tissue sections at 1 and 7 days' post-dosing using enhanced darkfield microscopy and hyperspectral imaging. Nuclear magnetic resonance (NMR) analysis was used for biochemical profiling and pathway mapping of endogenous metabolites in urine collected at 24-h intervals prior to dosing, at Day 1 and Day 7. At Day 1 and Day 7, all three MWCNTs were observed in liver. NIEHS-12-2 was observed in spleen, whereas NIEHS-13-2 and NIEHS-14-2 were not. All three MWCNTs were observed in lymph nodes and lung at Day 7. The urinary biochemical profile showed the highest positive fold change (FC) at Day 7 for the metabolites acetate, alanine, and lactate, whereas 1-methylnicotinamide, 2-oxoglutarate, and hippurate had some of the lowest FCs for all three MWCNTs. This study demonstrates that the observed tissue location of MWCNTs is size dependent. Overlaps in the perturbation of endogenous metabolite profiles were found regardless of their size, and the biochemical responses were more profound at Day 7 compared with Day 1, indicating a delayed biological response to MWCNTs.

CNTs-CaP/chitosan-coated AZ91D magnesium alloy extract promoted rat dorsal root ganglia neuron growth via activating ERK signalling pathway

Increasing attention has been paid on the application of biodegradable materials such as magnesium and its alloys in neuron repair. AZ91D magnesium alloy coated with carbon nanotubes (CNTs) and/or calcium phosphate (CaP)/chitosan (CS) was fabricated in this study. To evaluate the bioactivity of these AZ91D-based composites, the extracts were prepared by immersing samples in modified simulated body fluid (m-SBF) for 0, 2, 8, 16, 24, 34, 44, 60, or 90 days. Immunofluorescence staining for neuronal class III β-tubulin (TUJ1) revealed that both CNTs-CaP/CS-AZ91D and CaP/CS-AZ91D extracts promoted axon outgrowth of dorsal root ganglia (DRG) neurons, accompanied with increased expression of phosphorylated focal adhesion kinase (p-FAK) and growth associated protein-43 (GAP-43). Besides, the extracts increased the expression and the release of neurotrophic factors including nerve growth factor (NGF) and brain-derived neurotrophic factor (BDNF). ERK signalling was activated in DRG neurons after treating with either CNTs-CaP/CS-AZ91D or CaP/CS-AZ91D extracts, and its inhibition with U0126 counteracted the beneficial effects of these extracts on DRG neuron. Overall, the extracts from these AZ91D-based composites might promote DRG neuron growth via activating ERK signalling pathway. Notably, CNTs-CaP/CS-AZ91D extracts showed a better promoting effect on neuron growth than CaP/CS-AZ91D. Assessment of ion elements showed that the addition of CNTs coating enhanced magnesium corrosion resistance and reduced the deposition of calcium and phosphorus on the surface of CaP/CS-AZ91D alloy. These findings demonstrate that CNTs-CaP/CS-AZ91D likely provide a more suitable environment for neuron growth, which suggests a potential implantable biomaterial for the treatment of nerve injury. SIGNIFICANCE: AZ91D magnesium alloy coated with carbon nanotubes (CNTs) and/or calcium phosphate (CaP)/chitosan (CS) was fabricated and their immersion extracts were prepared using modified simulated body fluid in this study. Both extracts from CNTs-CaP/CS and CaP/CS-coated AZ91D magnesium alloy promotes rat dorsal root ganglia (DRG) neuron growth via activating ERK signalling pathway. Notably, the addition of CNTs improves the performance of CaP/CS-AZ91D. For the first time, our research demonstrates that CNTs-CaP/CS-AZ91D likely provide a suitable environment for neuron growth, suggesting these AZ91D-based composites as potential implantable biomaterials for the treatment of nerve injury.

Electroanalytical overview: utilising micro- and nano-dimensional sized materials in electrochemical-based biosensing platforms

Research into electrochemical biosensors represents a significant portion of the large interdisciplinary field of biosensing. The drive to develop reliable, sensitive, and selective biosensing platforms for key environmental and medical biomarkers is ever expanding due to the current climate. This push for the detection of vital biomarkers at lower concentrations, with increased reliability, has necessitated the utilisation of micro- and nano-dimensional materials. There is a wide variety of nanomaterials available for exploration, all having unique sets of properties that help to enhance the performance of biosensors. In recent years, a large portion of research has focussed on combining these different materials to utilise the different properties in one sensor platform. This research has allowed biosensors to reach new levels of sensitivity, but we note that there is room for improvement in the reporting of this field. Numerous examples are published that report improvements in the biosensor performance through the mixing of multiple materials, but there is little discussion presented on why each nanomaterial is chosen and whether they synergise well together to warrant the inherent increase in production time and cost. Research into micro-nano materials is vital for the continued development of improved biosensing platforms, and further exploration into understanding their individual and synergistic properties will continue to push the area forward. It will continue to provide solutions for the global sensing requirements through the development of novel materials with beneficial properties, improved incorporation strategies for the materials, the combination of synergetic materials, and the reduction in cost of production of these nanomaterials.

Fenton-like reaction driving the degradation and uptake of multi-walled carbon nanotubes mediated by bacterium

Carbon nanotubes (CNTs) have been widely studied because of their potential applications. The increasing applications of CNTs and less known of their environmental fates rise concerns about their safety. In this study, the biotransformation of multi-walled carbon nanotubes (MWCNTs) by Labrys sp. WJW was investigated. Within 16 days, qPCR analysis showed that cell numbers increased 4.92 ± 0.36 folds using 100 mg/L MWCNTs as the sole carbon source. The biotransformation of MWCNTs, which led to morphology and functional group change, was evidenced by transmission electron microscopy and X-ray photoelectron spectroscopy analyses. Raman spectra illustrated that more defects and disordered carbon appeared on MWCNTs during incubation. The underlying biotransformation mechanism of MWCNTs through an extracellular bacterial Fenton-like reaction was demonstrated. In this bacteria-mediated reaction, the OH production was induced by reduction of H₂O₂ involved a continuous cycle of Fe(II)/Fe(III). Bacterial biotransformation of MWCNTs will provide new insights into the understanding of CNTs bioremediation processes.

Graphene-on-Glass Preparation and Cleaning Methods Characterized by Single-Molecule DNA Origami Fluorescent Probes and Raman Spectroscopy

Graphene exhibits outstanding fluorescence quenching properties that can become useful for biophysics and biosensing applications, but it remains challenging to harness these advantages due to the complex transfer procedure of chemical vapor deposition-grown graphene to glass coverslips and the low yield of usable samples. Here, we screen 10 graphene-on-glass preparation methods and present an optimized protocol. To obtain the required quality for single-molecule and super-resolution imaging on graphene, we introduce a graphene screening method that avoids consuming the investigated sample. We apply DNA origami nanostructures to place fluorescent probes at a defined distance on top of graphene-on-glass coverslips. Subsequent fluorescence lifetime imaging directly reports on the graphene quality, as deviations from the expected fluorescence lifetime indicate imperfections. We compare the DNA origami probes with conventional techniques for graphene characterization, including light microscopy, atomic force microscopy, and Raman spectroscopy. For the latter, we observe a discrepancy between the graphene quality implied by Raman spectra in comparison to the quality probed by fluorescence lifetime quenching measured at the same position. We attribute this discrepancy to the difference in the effective area that is probed by Raman spectroscopy and fluorescence quenching. Moreover, we demonstrate the applicability of already screened and positively evaluated graphene for studying single-molecule conformational dynamics on a second DNA origami structure. Our results constitute the basis for graphene-based biophysics and super-resolution microscopy.

Ligninolytic activity of the Penicillium chrysogenum and Pleurotus ostreatus fungi involved in the biotransformation of synthetic multi-walled carbon nanotubes modify its toxicity

Multi-walled carbon nanotubes (MWCNTs) are of multidisciplinary scientific interest due to their exceptional physicochemical properties and a broad range of applications. However, they are considered potentially toxic nanoparticles when they accumulate in the environment. Given their ability to oxidize resistant polymers, mycorremediation with lignocellulolytic fungi are suggested as biological alternatives to the mineralization of MWCNTs. Hence, this study involves the ability of two fungi specie to MWCNTs biotransformation by laccase and peroxidases induction and evaluation in vivo of its toxicity using Caenorhabditis elegans worms as a model. Results showed that the fungi Penicillium chrysogenum and Pleurotus ostreatus were capable to grow on media with MWCNTs supplemented with glucose or lignin. Activities of lignin-peroxidase, manganese-peroxidase, and laccase in cultures of both fungi were induced by MWCNTs. Raman, FTIR spectroscopy, HR-TEM, and TGA analyses of the residue from the cultures of both fungi revealed structural modifications on the surface of MWCNTs and its amount diminished, correlating the MWCNTs structural modifications with the laccase-peroxidase activities in the fungal cultures. Results indicate that the degree of toxicity of MWCNTs on the C. elegans model was enhanced by the structure modification associated with the fungal ligninolytic activity. The toxic effect of MWCNTs on the in vivo model of worms reveals the increment of reactive oxygen species as a mechanism of toxicity. Findings indicate that the MWCNTs can be subject in nature to biotransformation processes such as the fungal metabolism, which contribute to modify their toxicity properties on susceptible organisms and contributing to environmental elimination.

Drug Delivery With Carbon-Based Nanomaterials as Versatile Nanocarriers: Progress and Prospects

With growing interest, a large number of researches have been conducted on carbon-based nanomaterials (CBNs). However, their uses are limited due to comprehensive potential environmental and human health effects. It is often confusing for researchers to make an informed choice regarding the versatile carbon-based nanocarrier system and its potential applications. This review has highlighted emerging applications and cutting-edge progress of CBNs in drug delivery. Some critical factors like enzymatic degradation, surface modification, biological interactions, and bio-corona have been discussed here. These factors will help to fabricate CBNs for effective drug delivery. This review also addresses recent advancements in carbon-based target specific and release controlled drug delivery to improve disease treatment. The scientific community has turned their research efforts into the development of novel production methods of CBNs to make their production more attractive to the industrial sector. Due to the nanosize and diversified physical properties, these CBNs have demonstrated distinct biological interaction. Thus long-term preclinical toxicity study is recommended before finally translating to clinical application.

Biogenic fenton-like reaction involvement in aerobic degradation of C60 by Labrys sp. WJW

Buckminster fullerene (C₆₀), the most representative type among fullerenes, has attracted widely attentions because of its many potential applications. The increasing application of fullerene and limited knowledge of its environmental fate are required concerns. Herein, the biotransformation of C₆₀ by Labrys sp. WJW was investigated. Cell numbers reached 25.76 ± 1.85 folds within 8 days using 100 mg/L C₆₀ as sole carbon source. The biotransformation of C₆₀ by Labrys sp. WJW was analyzed by various characterization methods. Raman spectra indicated that strain WJW broke the soccer ball like structure of C₆₀. After 12 days, over 60% of C₆₀ was degraded evidenced by UV-vis spectrophotometry and liquid chromatography-mass spectrometry. The underlying biotransformation mechanism of C₆₀ through an extracellular Fenton-like reaction was illustrated. In this reaction, the ^•OH production was mediated by reduction of H₂O₂ involving a continuous cycle of Fe(II)/Fe(III). Bacterial transformation of C₆₀ will provide new insights into the understanding of C₆₀ bioremediation process.

Nanomaterial Additives for Fabrication of Stimuli-Responsive Skeletal Muscle Tissue Engineering Constructs

Volumetric muscle loss necessitates novel tissue engineering strategies for skeletal muscle repair, which have traditionally involved cells and extracellular matrix-mimicking scaffolds and have thus far been unable to successfully restore physiologically relevant function. However, the incorporation of various nanomaterial additives with unique physicochemical properties into scaffolds has recently been explored as a means of fabricating constructs that are responsive to electrical, magnetic, and photothermal stimulation. Herein, several classes of nanomaterials that are used to mediate external stimulation to tissue engineered skeletal muscle are reviewed and the impact of these stimuli-responsive biomaterials on cell growth and differentiation and in vivo muscle repair is discussed. The degradation kinetics and biocompatibilities of these nanomaterial additives are also briefly examined and their potential for incorporation into clinically translatable skeletal muscle tissue engineering strategies is considered. Overall, these nanomaterial additives have proven efficacious and incorporation in tissue engineering scaffolds has resulted in enhanced functional skeletal muscle regeneration.

Bacteria mediated Fenton-like reaction drives the biotransformation of carbon nanomaterials

Carbon nanomaterials (CNs), which gain heightened attention as novel materials, are increasingly incorporated into daily products and thus are released into the environment. Limited research on CNs environmental fates lags their industry growth, only few bacteria have been confirmed to biotransform CNs and the mechanism behind has not been revealed yet. In this study, four types of commercial CNs, i.e. graphene oxide (GO), reduced graphene oxide (RGO), single walled carbon nanotubes (SWCNTs), and oxidized (carboxylated) SWCNTs, were selected for investigation. The biotransformation of CNs by Labrys sp. WJW, which could grow with these CNs as the sole carbon source, was investigated. The bacterial transformation was proved by qPCR, transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, liquid chromatography/time-of-flight/mass spectrometry, and gas chromatograph-mass spectrometry analyses. The biotransformation resulted in morphology change, defect increase and functional group change of these CNs. Furthermore, the underlying mechanism of CNs biodegradation mediated by extracellular Fenton-like reaction was demonstrated. In this reaction, the OH production was mediated by reduction of H₂O₂ involved a continuous cycle of Fe(II)/Fe(III). These findings reveal a novel degradation mechanism of microorganism towards high molecular weight substrate, which will provide a new insight into the environmental fate of CNs and the guidance for their safer use.

Anisotropically Conductive Biodegradable Scaffold with Coaxially Aligned Carbon Nanotubes for Directional Regeneration of Peripheral Nerves

Fascicular rearrangement of an injured peripheral nerve requires reconnection of nerve sprouts from anterior and Büngner bands from distal sides of the lesion, failing to which leads to inefficient regeneration of the injured nerve. However, existing neural scaffolds have limited neuroregeneration efficiency because of either the lack of alignment of fibers and a conductive second phase, leading to compromised electrical conductivity, or the lack of extracellular matrix components and in vivo validation. The present study reports a biocompatible, multiwall carbon nanotube (MWCNT)-reinforced, anisotropically conductive, electrospun, aligned nanofibrous scaffold, ensuring maximal peripheral nerve regeneration. Electrospinning parameters were modulated to deposit random and parallel fibers in separate scaffolds for comparative analysis on the effect of fiber alignment on regeneration. Both types of scaffolds were reinforced with MWCNTs to impart electrical conductivity. Nonreinforced scaffolds were nonconductive. In this comparative study, MWCNT-reinforced, aligned scaffolds showed better tensile property with increased conductivity along the direction of alignment, thereby ensuring an escalated neural-regeneration rate. Collectively, in vitro studies established the scaffolds to be highly biocompatible, promoting cell growth and proliferation. With 85% more anisotropic conductivity in the direction of the alignment and the degradation kinetics tuned to the regeneration regime, the MWCNT-reinforced, aligned scaffold efficiently healed injured sciatic nerves in rats within 30 days. Rigorous revivification of the tissue was due to coordinated Wallerian degeneration and expedited guided axonal regeneration. Structural and functional analysis of nerves in vivo showed the aligned, MWCNT-reinforced scaffold to be very efficient in peripheral sciatic nerve regeneration. This study notes the efficacy of the coaxially aligned, MWCNT-reinforced neural scaffold, with a capability of establishing remarkable advancement in the field of peripheral neural regeneration.

Degradation-by-design: how chemical functionalization enhances the biodegradability and safety of 2D materials

A large number of graphene and other 2D materials are currently used for the development of new technologies, increasingly entering different industrial sectors. Interrogating the impact of such 2D materials on health and environment is crucial for both modulating their potential toxicity in living organisms and eliminating them from the environment. In this context, understanding if 2D materials are bio-persistent is mandatory. In this review we describe the importance of biodegradability and decomposition of 2D materials. We initially cover the biodegradation of graphene family materials, followed by other emerging classes of 2D materials including transition metal dichalcogenides and oxides, Xenes, Mxenes and other non-metallic 2D materials. We explain the role of defects and functional groups, introduced onto the surface of the materials during their preparation, and the consequences of chemical functionalization on biodegradability. In strong relation to the chemistry on 2D materials, we describe the concept of "degradation-by-design" that we contributed to develop, and which concerns the covalent modification with appropriate molecules to enhance the biodegradability of 2D materials. Finally, we cover the importance of designing new biodegradable 2D conjugates and devices for biomedical applications as drug delivery carriers, in bioelectronics, and tissue engineering. We would like to highlight that the biodegradation of 2D materials mainly depends on the type of material, the chemical functionalization, the aqueous dispersibility and the redox potentials of the different oxidative environments. Biodegradation is one of the necessary conditions for the safe application of 2D materials. Therefore, we hope that this review will help to better understand their biodegradation processes, and will stimulate the chemists to explore new chemical strategies to design safer products, composites and devices containing 2D materials.

Transformation pathways and fate of engineered nanoparticles (ENPs) in distinct interactive environmental compartments: A review

The ever increasing production and use of nano-enabled commercial products release the massive amount of engineered nanoparticles (ENPs) in the environment. An increasing number of recent studies have shown the toxic effects of ENPs on different organisms, raising concerns over the nano-pollutants behavior and fate in the various environmental compartments. After the release of ENPs in the environment, ENPs interact with various components of the environment and undergoes dynamic transformation processes. This review focus on ENPs transformations in the various environmental compartments. The transformation processes of ENPs are interrelated to multiple environmental aspects. Physical, chemical and biological processes such as the homo- or hetero-agglomeration, dissolution/sedimentation, adsorption, oxidation, reduction, sulfidation, photochemically and biologically mediated reactions mainly occur in the environment consequently changes the mobility and bioavailability of ENPs. Physico-chemical characteristics of ENPs (particle size, surface area, zeta potential/surface charge, colloidal stability, and core-shell composition) and environmental conditions (pH, ionic strength, organic and inorganic colloids, temperature, etc.) are the most important parameters which regulated the ENPs environmental transformations. Meanwhile, in the environment, organisms encountered multiple transformed ENPs rather than the pristine nanomaterials due to their interactions with various environmental materials and other pollutants. Thus it is the utmost importance to study the behavior of transformed ENPs to understand their environmental fate, bioavailability, and mode of toxicity.

Clearance of single-wall carbon nanotubes from the mouse lung: a quantitative evaluation

Based on the characteristics of carbon nanotubes (CNTs) that absorb light in the near-infrared region, we have developed a method to quantify the biodistribution of CNTs in mouse tissues such as the liver, lungs and spleen. By using this method, the kinetic biodistribution of single-walled CNTs (SWNTs) after intravenous injection into mice for 60 days has been successfully investigated. The results show that the biodistribution of CNTs was diameter-dependent by comparing two different diameters of SWNTs. The SWNTs with larger diameters (1-5 nm) accumulated more in the liver or spleen but less in the lungs than those with smaller diameters (0.7-0.9 nm). The quantities of both SWNTs in the liver and lungs decreased with time and showed no significant change in the spleen, which is also confirmed by histological analysis. In particular, the results have demonstrated that both SWNTs are cleared from the lungs almost completely within 60 days, suggesting that the pulmonary toxicity of SWNTs would be low when low amounts of CNTs (<70 μg g^-1 of tissue) enter inside the lungs. In addition, no obvious inflammatory responses are found from the measurement of the cytokines TGF-β1, IL-6, INF-γ, and TNF-α in the plasma and organs after the injection of both SWNTs into mice.

Ligninolytic enzymes and its mechanisms for degradation of lignocellulosic waste in environment

Ligninolytic enzymes play a key role in degradation and detoxification of lignocellulosic waste in environment. The major ligninolytic enzymes are laccase, lignin peroxidase, manganese peroxidase, and versatile peroxidase. The activities of these enzymes are enhanced by various mediators as well as some other enzymes (feruloyl esterase, aryl-alcohol oxidase, quinone reductases, lipases, catechol 2, 3-dioxygenase) to facilitate the process for degradation and detoxification of lignocellulosic waste in environment. The structurally laccase is isoenzymes with monomeric or dimeric and glycosylation levels (10–45%). This contains four copper ions of three different types. The enzyme catalyzes the overall reaction: 4 benzenediol + O₂ to 4 benzosemiquinone + 2H₂O. While, lignin peroxidase is a glycoprotein molecular mass of 38–46 kDa containing one mole of iron protoporphyrin IX per one mol of protein, catalyzes the H₂O₂ dependent oxidative depolymerization of lignin. The manganese peroxidase is a glycosylated heme protein with molecular mass of 40–50kDa. It depolymerizes the lignin molecule in the presence of manganese ion. The versatile peroxidase has broad range substrate sharing typical features of the manganese and lignin peroxidase families. Although ligninolytic enzymes have broad range of industrial application specially the degradation and detoxification of lignocellulosic waste discharged from various industrial activities, its large scale application is still limited due to lack of limited production. Further, the extremophilic properties of ligninolytic enzymes indicated their broad prospects in varied environmental conditions. Therefore it needs more extensive research for understanding its structure and mechanisms for broad range commercial applications.

Carbon nanotubes promote cell migration in hydrogels

Injectable hydrogels are increasingly used for in situ tissue regeneration and wound healing. Ideally, an injectable implant should promote the recruitment of cells from the surrounding native tissue and allow cells to migrate freely as they generate a new extracellular matrix network. Nanocomposite hydrogels such as carbon nanotube (CNT)-loaded hydrogels have been hypothesized to promote cell recruitment and cell migration relative to unloaded ones. To investigate this, CNT-glycol chitosan hydrogels were synthesized and studied. Chemoattractant-induced cell migration was studied using a modified Boyden Chamber experiment. Migrated cells were counted using flow cytometry. Cell adhesion was inferred from the morphology of the cells via an image segmentation method. Cell migration and recruitment results confirmed that small concentrations of CNT significantly increase cell migration in hydrogels, thereby accelerating tissue regeneration and wound healing in situations where there is insufficient migration in the unloaded matrix.

Advances in the application, toxicity and degradation of carbon nanomaterials in environment: A review

Carbon nanomaterials (CNMs) are novel nanomaterials with excellent physicochemical properties, which are widely used in biomedicine, energy and sensing. Besides, CNMs also play an important role in environmental pollution control, which can absorb heavy metals, antibiotics and harmful gases. However, CNMs are inevitably entering the environment while they are rapidly developing. They are harmful to living organisms in the environment and are difficult to degrade under natural conditions. Here, we systematically describe the toxicity of carbon nanotubes (CNTs), graphene (GRA) and C₆₀ to cells, animals, humans, and microorganisms. According to the current research results, the toxicity mechanism is summarized, including oxidative stress response, mechanical damage and effects on biological enzymes. In addition, according to the latest research progress, we focus on the two major degradation methods of chemical degradation and biodegradation of CNTs, GRA and C₆₀. Meanwhile, the reaction conditions and degradation mechanisms of degradation are respectively stated. Moreover, we have prospects for the limitations of CNM degradation under non-experimental conditions and their potential application.

Biodegradable Inorganic Nanoparticles for Cancer Theranostics: Insights into the Degradation Behavior

Inorganic nanoparticles as a versatile nanoplatform have been broadly applied in the diagnosis and treatment of cancers due to their inherent superior physicochemical properties (including magnetic, thermal, optical, and catalytic performance) and excellent functions (e.g., imaging, targeted delivery, and controlled release of drugs) through surface functional modification or ingredient dopant. However, in practical biological applications, inorganic nanomaterials are relatively difficult to degrade and excrete, which induces a long residence time in living organisms and thus may cause adverse effects, such as inflammation and tissue cysts. Therefore, the development of biodegradable inorganic nanomaterials is of great significance for their biomedical application. This Review will focus on the recent advances of degradable inorganic nanoparticles for cancer theranostics with highlight on the degradation mechanism, aiming to offer an in-depth understanding of degradation behavior and related biomedical applications. Finally, key challenges and guidelines will be discussed to explore biodegradable inorganic nanomaterials with minimized toxicity issues, facilitating their potential clinical translation in cancer diagnosis and treatment.

A Safe-by-Design Strategy towards Safer Nanomaterials in Nanomedicines

The marriage of nanotechnology and medicine offers new opportunities to fight against human diseases. Benefiting from their unique optical, thermal, magnetic, or redox properties, a wide range of nanomaterials have shown potential in applications such as diagnosis, drug delivery, or tissue repair and regeneration. Despite the considerable success achieved over the past decades, the newly emerging nanomedicines still suffer from an incomplete understanding of their safety risks, and of the relationships between their physicochemical characteristics and safety profiles. Herein, the most important categories of nanomaterials with clinical potential and their toxicological mechanisms are summarized, and then, based on this available information, an overview of the principles in developing safe-by-design nanomaterials for medical applications and of the recent progress in this field is provided. These principles may serve as a starting point to guide the development of more effective safe-by-design strategies and to help identify the major knowledge and skill gaps.

The UCD nanosafety workshop (03 December 2018): towards developing a consensus on safe handling of nanomaterials within the Irish university labs and beyond - a report

Careful handling of the nanomaterials (NMs) in research labs is crucial to ensure a safe working environment. As the largest university in Ireland, University College Dublin (UCD) has invested significant resources to update researchers working with NMs. Due to sizes often <100 nm, the NMs including nanoparticles, harbor unprecedented materialistic properties, for example, enhanced reactivity, conductivity, fluorescence, etc. which albeit conferring the NMs an edge over bulk materials regarding the applied aspects; depending on the dose, also render them to be toxic. Thus, a set of regulatory guidelines have emerged regarding safe handling of the NMs within occupational set-ups. Unfortunately, the current regulations based on the toxic chemicals and carcinogens are often confusing, lack clarity, and difficult to apply for the NMs. As a research-intensive university, a diverse range of research activities occur within the UCD labs, and it is difficult, at times impossible, for the UCD Safety, Insurance, Operational Risk & Compliance (SIRC) office to develop a set of common guidelines and cater throughout all its labs conducting research with the NMs. Hence, a necessity for dialog and exchange of ideas was felt across the UCD which encouraged the researchers including early stage researchers (e.g. PhDs, Postdocs) from multiple schools to participate in a workshop held on the 03 December 2018. The workshop tried to follow a pragmatic approach, where apart from discussing both the in vitro and in vivo scenarios, practical cases simulating situations faced frequently in the labs were discussed. This report summarizes the findings made during the workshop by this emerging critical mass in UCD.

Particle toxicology and health - where are we?

Background

Particles and fibres affect human health as a function of their properties such as chemical composition, size and shape but also depending on complex interactions in an organism that occur at various levels between particle uptake and target organ responses.

While particulate pollution is one of the leading contributors to the global burden of disease, particles are also increasingly used for medical purposes. Over the past decades we have gained considerable experience in how particle properties and particle-bio interactions are linked to human health. This insight is useful for improved risk management in the case of unwanted health effects but also for developing novel medical therapies. The concepts that help us better understand particles’ and fibres’ risks include the fate of particles in the body; exposure, dosimetry and dose-metrics and the 5 Bs: bioavailability, biopersistence, bioprocessing, biomodification and bioclearance of (nano)particles. This includes the role of the biomolecule corona, immunity and systemic responses, non-specific effects in the lungs and other body parts, particle effects and the developing body, and the link from the natural environment to human health. The importance of these different concepts for the human health risk depends not only on the properties of the particles and fibres, but is also strongly influenced by production, use and disposal scenarios.

Conclusions

Lessons learned from the past can prove helpful for the future of the field, notably for understanding novel particles and fibres and for defining appropriate risk management and governance approaches.

A novel environmental fate of graphene oxide: Biodegradation by a bacterium Labrys sp. WJW to support growth

Graphene oxide (GO) is a new type of nanomaterial with unique physicochemical properties and diverse applications, whereas it poses potential risk to human and environment. By screening from natural soil exposed to GO in the laboratory, we successfully obtained a novel bacterium, Labrys sp. WJW, which was able to use GO as the sole carbon source for growth. Within 8 days, cell numbers increased 16.76 ± 3.21 folds using 100 mg/L GO as the carbon source by qPCR analysis. The bacterial biodegradation which resulted in formation of holes and functional group changes of GO was proved by Raman spectroscopy, atomic force microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy analyses. Aromatic intermediates with structures of benzoic acid and phenol were identified using gas chromatograph-mass spectrometry and liquid chromatography/time-of-flight/mass spectrometry. Combination of genomic and proteomic analyses were performed to explore the proteins associated with GO degradation. A total of 644 proteins were significantly shifted. Bioinformatics analysis indicated that part of the up-regulated proteins were related to oxidation, ring cleavage and intermediates transmembrane processes, and GO was supposed to be degraded to benzoate and further degraded for downstream processes. This study enriches our understanding and provides new insights into the environmental fate of GO.

Wall Thickness of Industrial Multi-Walled Carbon Nanotubes Is Not a Crucial Factor for Their Degradation by Sodium Hypochlorite

The propensity of multi-walled carbon nanotubes (MWCNTs) for biodegradation is important for their safe use in medical and technological applications. Here, we compared the oxidative degradation of two samples of industrial-grade MWCNTs—we called them MWCNT-d and MWCNT-t—upon their treatment with sodium hypochlorite (NaOCl). The MWCNTs had a similar inner diameter but they differed about 2-fold in the outer diameter. Electron microscopy combined with morphometric analysis revealed the different degradation of the two types of MWCNTs after their incubation with NaOCl—the thicker MWCNT-d were damaged more significantly than the thinner MWCNT-t. The both types of MWCNTs degraded at the inner side, but only MWCNT-d lost a significant number of the outer graphitic layers. Raman spectroscopy demonstrated that both MWCNTs had a similar high defectiveness. Using energy-dispersive X-ray spectroscopy, we have shown that the more degradable MWCNT-d contained the same level of oxygen as MWCNT-t, but more metal impurities. The obtained results suggest that the biodegradability of MWCNTs depends not only on the wall thickness but also on the defects and impurities. Thus, the biodegradability can be regulated by the synthesis conditions or the post-synthesis modifications. Such degradation flexibility may be important for both medical and industrial applications.

Efficient electrochemical degradation of multiwall carbon nanotubes

As the production mass of multiwall carbon nanotubes (MWCNT) increases, the potential for human and environmental exposure to MWCNTs may also increase. We have shown that exposing an aqueous suspension of pristine MWCNTs to an intense oxidative treatment in an electrochemical reactor, equipped with an efficient hydroxyl radical generating Boron Doped Diamond (BDD) anode, leads to their almost complete mineralization. Thermal optical transmittance analysis showed a total carbon mass loss of over two orders of magnitude due to the electrochemical treatment, a result consistent with measurements of the degraded MWCNT suspensions using UV-vis absorbance. Liquid chromatography data excludes substantial accumulation of the low molecular weight reaction products. Therefore, up to 99% of the initially suspended MWCNT mass is completely mineralized into gaseous products such as CO₂ and volatile organic carbon. Scanning electron microscopy (SEM) images show sporadic opaque carbon clusters suggesting the remaining nanotubes are transformed into structure-less carbon during their electrochemical mineralization. Environmental toxicity of pristine and degraded MWCNTs was assessed using Caenorhabditis elegans nematodes and revealed a major reduction in the MWCNT toxicity after treatment in the electrochemical flow-by reactor.

Nanoemitters and innate immunity: the role of surfactants and bio-coronas in myeloperoxidase-catalyzed oxidation of pristine single-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) are experimentally utilized in in vivo imaging and photothermal cancer therapy owing to their unique physicochemical and electronic properties. For these applications, pristine carbon nanotubes are often modified by polymer surfactant coatings to improve their biocompatibility, adding more complexity to their recognition and biodegradation by immuno-competent cells. Here, we investigate the oxidative degradation of SWCNTs catalyzed by neutrophil myeloperoxidase (MPO) using bandgap near-infrared (NIR) photoluminescence and Raman spectroscopy. Our results show diameter-dependence at the initial stages of the oxidative degradation of sodium cholate-, DNA-, and albumin-coated SWCNTs, but not phosphatidylserine-coated SWCNTs. Moreover, sodium deoxycholate- and phospholipid-polyethylene glycol coated SWCNTs were not oxidized under the same reaction conditions, indicating that a surfactant can greatly impact the biodegradability of a nanomaterial. Our data also revealed that possible binding between MPO and surfactant coated-SWCNTs was unfavorable, suggesting that oxidation is likely caused by a hypochlorite generated through halogenation cycles of free MPO, and not MPO bound to the surface of SWCNTs. The identification of SWCNT diameters and coatings that retain NIR fluorescence during the interactions with the components of an innate immune system is important for their applications in in vivo imaging.

Direct visualization of carbon nanotube degradation in primary cells by photothermal imaging

Assessment of biodegradability of carbon nanotubes (CNTs) is a critically important aspect that needs to be solved before their translation into new biomedical tools. CNT biodegradation has been shown both in vitro and in vivo, but we are limited by the number of analytical techniques that can be used to follow the entire process. Photothermal imaging (PhI) is an innovative technique that enables the quantitative detection of nanometer-sized absorptive objects. In this study, we demonstrate that PhI allows the observation of the degradation process of functionalized multi-walled carbon nanotubes (MWCNTs) following their internalization by primary glial cells. The absence of interference from the biological matrix components, together with the possibility to combine PhI with other detection techniques (e.g. fluorescence, light or electron microscopy) validate the potential of this method to follow the fate and behavior of carbon nanostructures in a biological environment.

Increasing evidence indicates low bioaccumulation of carbon nanotubes

As the production of carbon nanotubes (CNTs) expands, so might the potential for release into the environment. The possibility of bioaccumulation and toxicological effects has prompted research on their fate and potential ecological effects. For many organic chemicals, bioaccumulation properties are associated with lipid-water partitioning properties. However, predictions based on phase partitioning provide a poor fit for nanomaterials. In the absence of data on the bioaccumulation and other properties of CNTs, the Office of Pollution Prevention and Toxics (OPPT) within the US Environmental Protection Agency (EPA) subjects new pre-manufacture submissions for all nanomaterials to a higher-level review. We review the literature on CNT bioaccumulation by plants, invertebrates and non-mammalian vertebrates, summarizing 40 studies to improve the assessment of the potential for bioaccumulation. Because the properties and environmental fate of CNTs may be affected by type (single versus multiwall), functionalization, and dosing technique, the bioaccumulation studies were reviewed with respect to these factors. Absorption into tissues and elimination behaviors across species were also investigated. All of the invertebrate and non-mammalian vertebrate studies showed little to no absorption of the material from the gut tract to other tissues. These findings combined with the lack of biomagnification in the CNT trophic transfer studies conducted to date suggest that the overall risk of trophic transfer is low. Based on the available data, in particular the low levels of absorption of CNTs across epithelial surfaces, CNTs generally appear to form a class that should be designated as a low concern for bioaccumulation.

Microbial Transformation of Multiwalled Carbon Nanotubes by Mycobacterium vanbaalenii PYR-1

Carbonaceous nanomaterials are widely used in industry and consumer products, but concerns have been raised regarding their release into the environment and subsequent impacts on ecosystems and human health. Although many efforts have been devoted to understanding the environmental fate of carbonaceous nanomaterials, information about their microbial transformation is still rare. In this study, we found that within 1 month a polycyclic aromatic hydrocarbon-degrading bacterium, Mycobacterium vanbaalenii PYR-1, was able to degrade both pristine and carboxyl-functionalized multiwalled carbon nanotubes (p-MWCNT and c-MWCNT), as demonstrated by consistent results from high resolution transmission electron microscopy, Raman spectroscopy, and confocal Raman microspectroscopy. Statistical analysis of Raman spectra identified a significant increase in the density of disordered or amorphous carbon in p-MWCNT and c-MWCNT after biodegradation. Microbial respiration further suggested potential mineralization of MWCNTs within about 1 month. All of our analyses consistently showed higher degradation or mineralization of c-MWCNT compared to p-MWCNT. These results highlight the potential of using bacteria in engineered systems to remove residual carbonaceous nanomaterials and reduce risk of human exposure and environmental impact. Meanwhile, our finding suggests possible transformation of carbonaceous nanomaterials by polycyclic aromatic hydrocarbon-degrading bacteria in the natural environment, which should be accounted for in predicting the environmental fate of these emerging contaminants and in nanotechnology risk regulation.

Degradation and Microbial Uptake of C60 Fullerols in Contrasting Agricultural Soils

The environmental fate of functionalized carbon nanomaterials (CNM) remains poorly understood. Using ¹³C-labeled nanomaterial we present the results of a study investigating the mineralization and microbial uptake of surface-functionalized C₆₀ (fullerols) in agricultural soils with contrasting properties. Soil microcosms rapidly mineralized fullerol C, as determined by ¹³C-content in the respired CO₂, with higher fullerol mineralization in an organic, clay-rich soil versus a silty, low C soil (∼56.3% vs ∼30.9% fullerol C mineralized over 65 days). By tracking the enriched ¹³C from fullerol into microbial phospholipid fatty acids (PLFA) we also report, for the first time, the incorporation of nanomaterial-derived C into soil microbial biomass, primarily by fungi and Gram-negative bacteria. While more fullerol C was incorporated into PLFA in the organic C-rich soil (0.77% vs 0.19% of PLFA C), this soil incorporated fullerol C into biomass less efficiently than the silty, low C soil (0.13% and 0.84% of assimilated fullerol C, respectively). These results demonstrate that, in contrast to pristine C₆₀, surface functionalized C₆₀ are unlikely to accumulate in surface soils and are readily mineralized by a range of soil microorganisms.

Biodegradation of Carbon Nanotubes, Graphene, and Their Derivatives

Carbon nanotubes (CNTs), graphene (GRA), and their derivatives are promising materials for a wide range of applications such as pollutant removal, enzyme immobilization, bioimaging, biosensors, and drug delivery and are rapidly increasing in use and increasingly mass produced. The biodegradation of carbon nanomaterials by microbes and enzymes is now of great importance for both reducing their toxicity to living organisms and removing them from the environment. Here we review recent progress in the biodegradation field from the point of view of the primary microbes and enzymes that can degrade these nanomaterials, along with experimental and molecular simulation methods for the exploration of nanomaterial degradation. Further efforts should primarily aim toward expanding the repertoire of microbes and enzymes and exploring optimal conditions for the degradation of nanomaterials.

The potential ecological risk of multiwall carbon nanotubes was modified by the radicals resulted from peroxidase-mediated tetrabromobisphenol A reactions

Extensive studies have been conducted on the environmental degradation of multiwall carbon nanotubes (MWCNTs), but primarily focused on the extent and rate of MWCNTs mineralization. Few studies have explored possible structural changes that may occur to MWCNTs during natural or engineered processes. We systematically examined MWCNTs in oxidative coupling reactions in the presence of a common contaminant tetrabromobisphenol A (TBBPA). MWCNTs was modified by the radicals of TBBPA resulting from peroxidase-mediated coupling reaction. Interactions between TBBPA radicals and MWCNTs were definitely confirmed by analyzing the characteristic mass spectrometry response of bromine in TBBPA and the structures of MWCNTs. After reaction with TBBPA radicals for 60 min, the content of bromine contained in MWCNTs was 6.84(±0.12)%, a quantity equivalent to a 501.65(±2.19) mg loading of TBBPA per gram MWCNTs. Modified MWCNTs had better stability and smaller sizes than that of MWCNTs and TBBPA-adsorbed MWCNTs. Assessment using zebrafish embryos revealed that the modified MWCNTs passed through the chorion and entered the embryo inducing acute toxicity, while the MWCNTs/TBBPA-adsorbed MWCNTs was trapped by chorion. These findings indicated that MWCNTs was modified in peroxidase-mediated coupling reactions, and suggested that such modifications may have an influence on the ecological risks of MWCNTs.

Early signs of multi-walled carbon nanotbues degradation in macrophages, via an intracellular pH-dependent biological mechanism; importance of length and functionalization

Background

Carbon nanotubes (CNT) can interact with the biological environment, which could participate in their associated toxicity. We recently demonstrated that pH is an important player of CNT fate inside macrophages. We wanted to further characterize such process, and therefore designed a study dedicated to decipher CNT biodegradation by macrophages, as a function of two major physico-chemical properties in regard with nanotoxicology; length and degree of functionalization. To achieve our aim, we synthesized, following a single initial production process, four MWCNT differing in length and/or surface chemistry: S-CNT (short), SF-CNT (short functionalized), L-CNT (long) and LF-CNT (long functionalized).

Results

Raman spectroscopy analysis performed on CNT recovered after exposure of RAW 264.7 macrophages for 6, 24, or 48 h demonstrate that CNT show early signs of biodegradation over time inside macrophages. The modulation of CNT length and functionalization, resulting in the modification of iron accessibility, both represent critical determinants of the biodegradation process; short pristine CNT were more prone to biodegradation than long CNT (pristine or functionalized), while short functionalized CNT were protected. Incubation of cells with Concanamycin completely prevents CNT from being modified, demonstrating that this biodegradation process is dependent on an intracellular pH-dependent mechanism. Interestingly, and despite evidence of degradation via Raman spectroscopy, the CNT length and diameter were not altered during the course of the study.

Conclusions

In conclusion, our results identify a new mechanism of CNT biodegradation inside macrophages. This could give new insights for the understanding of CNT-associated toxicity, and represent important tools to develop safe(r)-by-design nanomaterials.

Electronic supplementary material

The online version of this article (doi:10.1186/s12989-016-0175-z) contains supplementary material, which is available to authorized users.