DPPC Langmuir monolayer at the air-water interface: probing the tail and head groups by vibrational sum frequency generation spectroscopy

Using phase-resolved vibrational sum-frequency imaging to probe the impact of head-group functionality on hierarchical domain structure in lipid membranes

The substantial diversity in phospholipids within a plasma membrane, varying in tail length, degree of saturation, and head-group functionality, generates widespread structural heterogeneity. This exists both laterally across the membrane through the spontaneous formation of condensed domains that differ from their surrounding expanded phase in density, composition, and molecular packing order, as well as between its two leaflets, which normally maintain significant compositional asymmetry. Of particular importance is the exposure of phosphatidylserine (PS) lipids which is a marker for important physiological processes e.g. apoptosis. Despite this, the molecular-level alterations to the phase-structure of the membrane that result from PS exposure remain generally unknown. In this work, we utilise recently developed phase-resolved azimuthal-scanned sum-frequency generation (SFG) microscopy to investigate structural changes that occur heterogeneously across model membranes as a result of PS-lipid exposure. Specifically, by probing mixed monolayers of 1,2-dipalmitoylphosphatidylcholine (DPPC) and deuterated 1-palmitoyl-2-oleoylphosphatidylcholine (dPOPC) in both the C-H and C-D stretching regions as well as equivalent films with DPPC exchanged with DPPS, we analyse the variations in the apparent phase distributions and domain morphologies, and quantitatively extract the density, composition, and relative out-of-plane packing order for both mixtures. We find that, in these mixtures, DPPS shows vast differences in the domain growth and coalescence behaviour compared to DPPC, as well as in the relative compositions and molecular ordering within each phase. This demonstrates the critical role the head-group plays in the heterogeneous phase structure of the membrane and may give insights into their impact on important physiological processes.

Tip-Enhanced Sum Frequency Generation for Molecular Vibrational Nanospectroscopy

Vibrational sum frequency generation (SFG) is a nonlinear spectroscopic technique widely used to study the molecular structure and dynamics of surface systems. However, the spatial resolution achieved by far-field observations is constrained by the diffraction limit, obscuring molecular details in inhomogeneous structures smaller than the wavelength of light. To overcome this limitation, we developed a system for tip-enhanced SFG (TE-SFG) spectroscopy based on a scanning tunneling microscope. We successfully detected vibrational TE-SFG signals from adsorbed molecules on a gold substrate under ambient conditions. The phase analysis of interferometric SFG spectra provided information on molecular orientation. Furthermore, the observed TE-SFG signal was confirmed to originate from a highly localized region within a gap between the tip apex and the sample substrate. This method offers a novel platform for nonlinear optical nanospectroscopy, paving the way for the investigation of surface molecular systems beyond the diffraction limit.

Langmuir Monolayer Studies of Phosphatidylcholine Membranes with Naproxen on the Polysaccharide Subphase

Natural polysaccharides are biocompatible and biodegradable; therefore, they can be widely used in drug delivery, tissue engineering and wound healing. In this context, the interactions between polysaccharides, drugs and biological membranes are of great interest. In this paper, a 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) monolayer was used as a model membrane to study the interactions with polysaccharides: chitosan (Ch) and/or hyaluronic acid (HA) and a nonsteroidal anti-inflammatory drug (NSAID) naproxen (NAP). The changes in the physicochemical properties of the model membrane were characterized by means of the Langmuir monolayer technique combined with Brewster angle microscopy (BAM). Compression/adsorption isotherms and morphology images were obtained at 20 °C. They allowed us to determine the effect of the subphase type (Ch, HA, Ch-HA) on the behavior of DPPC monolayers in the absence and presence of NAP, their elasticity, morphology and stability as a function of time. A potential mode of interactions between the phospholipid, polysaccharides and drug responsible for the change in membrane properties was proposed. These interactions regulate the efficiency of drug delivery systems, being of importance for living organisms in pain relief and wound healing.

Cold Pressed Oil from Japanese Quince Seeds (Chaenomeles japonica): Characterization Using DSC, Spectroscopic, and Monolayer Data

The cold-pressed oil from Japanese quince seeds (JQSO) is notable for its favorable fatty acid profile, low oxidation rate, and bioactive compounds like antioxidants, sterols, and carotenoids. This study offers a detailed molecular-level physical characterization of JQSO and its minor components using differential scanning calorimetry (DSC), Langmuir monolayer studies, and various spectroscopic methods, including UV-vis absorption, fluorescence, and FTIR. DSC analysis identified five peaks related to triglyceride (TG) fractions and provided insights into the melting and crystallization behavior of JQSO. The Langmuir monolayer studies revealed high compressibility, indicative of superior emulsification properties. Viscoelastic modulus measurements suggested strong intermolecular interactions, contributing to the oil's resilience under stress-an attribute typical of oils high in saturated or monounsaturated fatty acids. Spectroscopic methods confirmed the presence of phenolic acids, tocopherols, carotenoids, and their derivatives. The total fluorescence spectra highlighted prominent peaks at 290 nm/330 nm and 360 nm/440 nm, while the total synchronous fluorescence spectra revealed key excitation-emission regions (10-50 nm/300 nm and 40-140 nm/360 nm), corroborating the presence of tocopherols, phenols, polyphenols, flavones, and carotenoids. No evidence of chlorophyll was detected. The ATR-FTIR spectra validated the presence of fatty acids and triacylglycerols, emphasizing a high degree of esterification and the dominance of unsaturated fatty acids in oil structures. The methods used provided the opportunity to perform a label-free, fast, and reliable determination of the properties of JQSO. The findings confirmed that crude, cold-pressed JQSO retains its valuable bioactive components, aligning with previous research on its chemical and physical properties.

Behavior at Air/Water Interface and Oxidative Stability of Vegetable Oils Analyzed Through Langmuir Monolayer Technique

This study aimed to evaluate the oxidative stability and surface properties of cold-pressed vegetable oils using the Langmuir monolayer technique. Six oils-milk thistle, evening primrose, flaxseed, camelina sativa, black cumin, and pumpkin seed-were analyzed to investigate their molecular organization and behavior at the air/water interface, particularly after undergoing oxidation. The results showed that oils rich in polyunsaturated fatty acids (PUFAs), such as flaxseed and evening primrose oils, formed monolayers with larger molecular areas and lower stability, which led to faster oxidative degradation, especially under thermal conditions. In contrast, pumpkin seed oil, with a higher content of saturated fatty acids (SFAs), formed more condensed and stable monolayers, enhancing its resistance to oxidation. Black cumin oil, with a balanced profile of SFAs and monounsaturated fatty acids (MUFAs), demonstrated similar stability. The Langmuir technique facilitated a detailed analysis of monolayer phase transitions: PUFA-rich oils transitioned more readily to less stable phases, while SFA-rich oils maintained durable, condensed structures. These findings underscore the utility of this method for assessing the oxidative stability of vegetable oils and highlight key parameters-such as surface pressure, molecular area, and elasticity modulus-that can support the optimization of oil storage and quality in the food industry and related sectors.

Binding of cis-[Ru(phen)2(3,4Apy)2]2+ to Model Lipid Membranes: Implications for New Tools in the Development of Antiamyloid Drugs

This study explores the interactions of the cis-[Ru(phen)2(Apy)2]2+ complex (RuApy, phen = 1,10-phenanthroline, Apy = 3,4-aminopyridine) with model lipid membranes to explain the role this complex plays in mitigating Aβ toxicity in PC12 neuronal cells. Fluorescence quenching, surface pressure isotherms in Langmuir monolayers, and infrared reflection-absorption analyses revealed that the positively charged RuApy interacts with the phosphate headgroups of monolayers, indirectly affecting ester carbonyl groups through hydrogen bonding with the amino group of the pyridine ligand of RuApy. These results offer a scenario for the protective effect of RuApy against Aβ toxicity in neuronal cells in which these interactions shield the electrostatic interactions of Aβ with lipid membranes, preserving membrane integrity and mitigating the deleterious influence of Aβ. This opens new avenues for antiamyloid strategies, focusing on compounds that prevent salt-bridge formation between bilayer membranes and amyloid proteins, aiding in the rational design of effective antiamyloid agents for therapeutic application.

Boron Cluster Anions Dissolve En Masse in Lipids Causing Membrane Expansion and Thinning

Boron clusters are applied in medicinal chemistry because of their high stability in biological environments and intrinsic ability to capture neutrons. However, their intermolecular interactions with lipid membranes, which are critical for their cellular delivery and biocompatibility, have not been comprehensively investigated. In this study, we combine different experimental methods - Langmuir monolayer isotherms at the air-water interface, calorimetry (DSC, ITC), and scattering techniques (DLS, SAXS) - with MD simulations to evaluate the impact of closo-dodecaborate clusters on model membranes of different lipid composition. The cluster anions interact strongly with zwitterionic membranes (POPC and DPPC) via the chaotropic effect and cause pronounced expansions of lipid monolayers. The resulting lipid membranes contain up to 33 mol % and up to 52 weight % of boron cluster anions even at low aqueous cluster concentrations (1 mM). They show high (μM) affinity to the hydrophilic-hydrophobic interface, affecting the structuring of the lipid chains, and therefore triggering a sequence of characteristic effects: (i) an expansion of the surface area per lipid, (ii) an increase in membrane fluidity, and (iii) a reduction of bilayer thickness. These results aid the design of boron cluster derivatives as auxiliaries in drug design as well as transmembrane carriers and help rationalize potential toxicity effects.

The Interactions of Anti-HIV Pronucleotides with a Model Phospholipid Membrane

Pronucleotides, after entering the cell, undergo chemical or enzymatic conversion into nucleotides with a free phosphate residue, and the released nucleoside 5'-monophosphate is then phosphorylated to the biologically active form, namely nucleoside 5'-triphosphate. The active form can inhibit HIV virus replication. For the most effective therapy, it is necessary to improve the transport of prodrugs into organelles. The introduction of new functional groups into their structure increases lipophilicity and, as a result, facilitates the interaction of pronucleotide molecules with components of biological membranes. Studies of these interactions were performed using the Langmuir technique. The prototype of the biological membrane was a thin monolayer composed of phospholipid molecules, DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine). The pronucleotides were 3'-azido-3'-deoxythymidine (AZT) analogs, formed by the phosphorylation of AZT to monophosphate (AZTMP) and containing various masking moieties that could increase their lipophilicity. Our results show the influence of the pronucleotide's chemical structure on the fluidization of the model biomembrane. Changes in monolayer morphology in the presence of prodrugs were investigated by BAM microscopy. It was found that the incorporation of new groups into the structure of the drug as well as the concentration of AZT derivatives have a significant impact on the surface properties of the formed DPPC monolayer.

Exploring the selective incorporation of 15β-senecioyloxi-ent-kaurenoic acid methyl ester in Langmuir monolayers mimicking cell membranes

A natural product isolated from Brazilian plant species Baccharis retusa (Asteraceae), 15β-senecioyloxi-ent-kaurenoic acid (1), demonstrated activity against trypomastigotes of the parasite Trypanosoma cruzi but it was inactive against intracellular forms. In the present work, compound 1a, a methyl ester derivative of 1, exhibited activity against intracellular amastigotes (EC50 = 11.8 μM), similar to that determined by the standard drug benznidazol (EC50 = 16.2 μM) and no toxicity against NCTC cells (CC50 > 200 μM). Based on this selectivity, compound 1a was incorporated into Langmuir monolayers of three lipids, DPPC, DPPE, and DPPS, to characterize the interaction of the compound with each lipid as model for cell membranes. For that, we used tensiometry, surface potential measurements, and infrared spectroscopy. Our results showed that incorporating the drug into DPPC monolayers significantly altered the physicochemical properties, resulting in more condensed monolayers. In contrast, the incorporation of the drug into DPPE and DPPS monolayers led to their expansion. The effects on DPPC were more pronounced than on the other lipids, inducing a viscoelastic monolayer with lower alignment of the alkyl chains, as observed through surface potential measurements and infrared spectroscopy. These changes indicate a more cohesive DPPC monolayer upon drug incorporation, forming domains in a strip shape. We believe these results contribute to understanding the interaction between 1a and lipid interfaces, especially those involved in biological interactions with amastigotes of parasite T. cruzi.

Extracting the Heterogeneous 3D Structure of Molecular Films Using Higher Dimensional SFG Microscopy

Ultrathin molecular films are widespread in both natural and industrial settings, where details of the molecular structure such as density, out-of-plane tilt angles, and in-plane directionality determine their physicochemical properties. Many of these films possess important molecular-to-macroscopic heterogeneity in these structural parameters, which have traditionally been difficult to characterize. Here, we show how extending sum-frequency generation (SFG) microscopy measurements to higher dimensionality by azimuthal-scanning can extract the spatial variation in the three-dimensional molecular structure at an interface. We extend the commonly applied theoretical assumptions used to analyze SFG signals to the study of systems possessing in-plane anisotropy. This theoretical framework is then applied to a phase-separated mixed lipid monolayer to investigate the variation in molecular density and 3D orientation across the chirally packed lipid domains. The results show little variation in out-of-plane structure but a distinct micron-scale region at the domain boundaries with a reduction in both density and in-plane ordering.

In-plane orientational motions of the functional groups of molecules at the air/water interface by time-resolved vibrational sum frequency generation

The movements of molecules at interfaces and surfaces are restricted by their asymmetric environments, leading to anisotropic orientational motions. In this work, in-plane orientational motions of the -C=O and -CF3 groups of coumarin 153 (C153) at the air/water interface were measured using time-resolved (TR) vibrational sum frequency generation (SFG). The in-plane orientational time constants of the -C=O and -CF3 groups of C153 are found to be 41.5 ± 8.2 and 36.0 ± 4.5 ps. These values are over five-times faster than that of 198 ± 15 ps for the permanent dipole of the whole C153 molecule at the interface, which may indicate that the two groups experience different interfacial friction in the plane. These differences could also be the result of the permanent dipole of C153 being almost five times those of the -C=O and -CF3 groups. The difference in orientational motions reveals the microscopic heterogeneous environment that molecules experience at the interface. While the interfacial dynamics of the two functional groups are similar, our TR-SFG experiments allowed the quantification of the in-plane dynamics of individual functional groups for the first time. Our experimental findings about the interfacial molecular motion have implications for molecular rotations, energy transfer, and charge transfer at material interfaces, photocatalysis interfaces, and biological cell/membrane aqueous interfaces.

Hydrolysis of phospholipid monolayers by phospholipase A2 revealed by heterodyne-detected sum frequency generation (HD-SFG) spectroscopy

Phospholipase A2 (PLA2) catalyzes the hydrolysis of the sn-2 acyl ester linkage in phospholipid, producing lysophospholipid and fatty acid in the presence of Ca2+. The hydrolysis mediated by PLA2 has attracted much interest in various fields, such as pharmacy and biotechnology. It is recognized that PLA2 cannot hydrolyze phospholipid monolayers at high surface coverage. However, the origin of different PLA2 activities is not fully understood yet. The present study investigated the interaction between DPPC (16:0 PC) monolayer and PLA2 using heterodyne-detected sum frequency generation spectroscopy, which is interface-specific spectroscopy and highly sensitive to molecular symmetry based on a second-order nonlinear optical process. It was revealed that PLA2 adsorbs to the DPPC monolayer on the aqueous solution surface only when the surface coverage is low. The adsorption at the low surface coverage significantly changes the interfacial structures of PLA2 and the hydration, which are stabilized by the presence of Ca2+. Therefore, the restriction of the hydrolysis of phospholipid monolayers at high surface coverage can be rationalized by the inhabitation of the PLA2 adsorption. The present study deepens our molecular-level understanding of the hydrolysis of phospholipids by PLA2.

Probing the Influence of Hydrophobicity of Modified Gold Nanoparticles in Modulating the Lipid Surface Behavior Using Vibrational Sum Frequency Generation Spectroscopy

A deep understanding of how the surface modifications of nanoparticles impact their interactions with cell membranes is vital for advancing safe and effective biomedical applications. Among the pivotal factors governing these interactions, the hydrophobicity of nanoparticles plays a crucial role, predominantly driven by the hydrophobic interactions with the cell membrane. Herein, we study the influence of the hydrophobic alkyl chain length of thiol-capped gold nanoparticles (GNPs) on lipid surfaces with the help of vibrational sum frequency generation spectroscopy. We have utilized the zwitterionic 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid monolayer as a representative model of cell membranes on the water surface. Our findings revealed that GNPs capped with the thiol ligand having a shorter alkyl chain such as heptanethiol (HT, C7) show minimal changes in the C-H stretching vibrations while interacting with the lipid monolayer. These observations could be attributed to the perturbation of the lipid chain due to hydrophobic-hydrophobic interactions between the alkyl chain of thiol-capped GNPs and the hydrophobic group of the lipid membrane or simply by the adsorption of GNPs at the interface without disrupting the monolayer structure. However, with increasing the chain length of thiol-capped GNPs from decanethiol (DDT, C10) to octadecanethiol (ODT, C18), the extent of spectral change in the C-H stretching vibration is increased. The controlled experiment performed with the deuterated lipids conforms that the changes observed in the C-H stretching vibration after adding HT (C7) GNPs are only because of their presence in the surface without altering the monolayer structure. However, in the case of DT (C10) and DDT (C12) GNPs, the strong hydrophobic interactions between the monolayer and the alkyl chain of the thiol-capped GNPs result in the increased orientational order of the monolayer. Moreover, in the case of ODT (C18) GNPs, the very long alkyl chain induces pronounced perturbations in the monolayer structure with net disordering of the monolayer. These observations are further supported by the spectral changes observed in the O-H vibration of the interfacial water molecules. Our findings reveal the crucial role of the hydrophobic nature of GNPs in influencing the interface. Understanding these effects is crucial for drug delivery applications and improving the stability and effectiveness of lipid-based systems.

Exploring the Use of a Lipopeptide in Dipalmitoylphosphatidylcholine Monolayers for Enhanced Detection of Glyphosate in Aqueous Environments

The growing reliance on pesticides for pest management in agriculture highlights the need for new analytical methods to detect these substances in food and water. Our research introduces a SPRWG-(C18H37) lipopeptide (LP) as a functional analog of acetylcholinesterase (AChE) for glyphosate detection in environmental samples using phosphatidylcholine (PC) monolayers. This LP, containing hydrophilic amino acids linked to an 18-carbon aliphatic chain, alters lipid assembly properties, leading to a more flexible system. Changes included reduced molecular area and peak pressure in Langmuir adsorption isotherms. Small angle X-ray scattering (SAXS) and atomic force microscopy (AFM) analyses provided insights into the LP's structural organization within the membrane and its interaction with glyphosate (PNG). Structural and geometric parameters, as derived from in silico molecular dynamics simulations (MD), substantiated the impact of LP on the monolayer structure and the interaction with PNG. Notably, the presence of the LP and glyphosate increased charge transfer resistance, indicating strong adherence of the monolayer to the indium tin oxide (ITO) surface and effective pesticide interaction. A calibration curve for glyphosate concentration adjustment revealed a detection limit (LOD) of 24 nmol L-1, showcasing the high sensitivity of this electrochemical biosensor. This LOD is significantly lower than that of a similar colorimetric biosensor in aqueous media with a detection limit of approximately 0.3 μmol L-1. Such an improvement in sensitivity likely stems from adding a polar residue to the amino acid chain of the LP.

EDTA enables to alleviate impacts of metal ions on conjugative transfer of antibiotic resistance genes

Various heavy metals are reported to be able to accelerate horizontal transfer of antibiotic resistance genes (ARGs). In real water environmental settings, ubiquitous complexing agents would affect the environmental behaviors of heavy metal ions due to the formation of metal-organic complexes. However, little is known whether the presence of complexing agents would change horizontal gene transfer due to heavy metal exposure. This study aimed to fill this gap by investigating the impacts of a typical complexing agent ethylenediaminetetraacetic acid (EDTA) on the conjugative transfer of plasmid-mediated ARGs induced by a range of heavy metal ions. At the environmentally relevant concentration (0.64 mg L-1) of metal ions, all the tested metal ions (Mg2+, Ca2+, Co2+, Pb2+, Ni2+, Cu2+, and Fe3+) promoted conjugative transfer of ARGs, while an inhibitory effect was observed at a relatively higher concentration (3.20 mg L-1). In contrast, EDTA (0.64 mg L-1) alleviated the effects of metal ions on ARGs conjugation transfer, evidenced by 11 %-66 % reduction in the conjugate transfer frequency. Molecular docking and dynamics simulations disclosed that this is attributed to the stronger binding of metal ions with the lipids in cell membranes. Under metal-EDTA exposure, gene expressions related to oxidative stress response, cell membrane permeability, intercellular contact, energy driving force, mobilization, and channels of plasmid transfer were suppressed compared with the metal ions exposure. This study offers insights into the alleviation mechanisms of complexing agents on ARGs transfer induced by free metal ions.

Protein-Mediated Changes in Membrane Fluidity and Ordering: Insights into the Molecular Mechanism and Implications for Cellular Function

Probing protein-membrane interactions is vital for understanding biological functionality for various applications such as drug development, targeted drug delivery, and creation of functional biomaterials for medical and industrial purposes. In this study, we have investigated interaction of Human Serum Albumin (HSA) with two different lipids, dipalmitoylphosphatidylglycerol (dDPPG) and dipalmitoylphosphatidylcholine (dDPPC), using Vibrational Sum Frequency Generation spectroscopy at different membrane fluidity values. In the liquid-expanded (LE) state of the lipid, HSA (at pH 3.5) deeply intercalated lipid chains through a combination of electrostatic and hydrophobic interactions, which resulted in more ordering of the lipid chains. However, in the liquid-condensed (LC) state, protein intercalation is decreased due to tighter lipid packing. Moreover, our findings revealed distinct differences in HSA's interaction with dDPPG and dDPPC lipids. The interaction with dDPPC remained relatively weak compared to dDPPG. These results shed light on the significance of protein mediated changes in lipid characteristics, which hold considerable implications for understanding membrane protein behavior, lipid-mediated cellular processes, and lipid-based biomaterial design.

Spiral packing and chiral selectivity in model membranes probed by phase-resolved sum-frequency generation microscopy

Since the lipid raft model was developed at the end of the last century, it became clear that the specific molecular arrangements of phospholipid assemblies within a membrane have profound implications in a vast range of physiological functions. Studies of such condensed lipid islands in model systems using fluorescence and Brewster angle microscopies have shown a wide range of sizes and morphologies, with suggestions of substantial in-plane molecular anisotropy and mesoscopic structural chirality. Whilst these variations can significantly alter many membrane properties including its fluidity, permeability and molecular recognition, the details of the in-plane molecular orientations underlying these traits remain largely unknown. Here, we use phase-resolved sum-frequency generation microscopy on model membranes of mixed chirality phospholipid monolayers to fully determine the three-dimensional molecular structure of the constituent micron-scale condensed domains. We find that the domains possess curved molecular directionality with spiralling mesoscopic packing, where both the molecular and spiral turning directions depend on the lipid chirality, but form structures clearly deviating from mirror symmetry for different enantiomeric mixtures. This demonstrates strong enantioselectivity in the domain growth process and indicates fundamental thermodynamic differences between homo- and heterochiral membranes, which may be relevant in the evolution of homochirality in all living organisms.

Insight into the Molecular Mechanism of Surface Interactions of Phosphatidylcholines─Langmuir Monolayer Study Complemented with Molecular Dynamics Simulations

Mutual interactions between components of biological membranes are pivotal for maintaining their proper biophysical properties, such as stability, fluidity, or permeability. The main building blocks of biomembranes are lipids, among which the most important are phospholipids (mainly phosphatidylcholines (PCs)) and sterols (mainly cholesterol). Although there is a plethora of reports on interactions between PCs, as well as between PCs and cholesterol, their molecular mechanism has not yet been fully explained. Therefore, to resolve this issue, we carried out systematic investigations based on the classical Langmuir monolayer technique complemented with molecular dynamics simulations. The studies involved systems containing 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) analogues possessing in the structure one or two polar functional groups similar to those of DPPC. The interactions and rheological properties of binary mixtures of DPPC analogues with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and cholesterol were compared with reference systems (DPPC/POPC and DPPC/cholesterol). This pointed to the importance of the ternary amine group in PC/cholesterol interactions, while in PC mixtures, the phosphate group played a key role. In both cases, the esterified glycerol group had an effect on the magnitude of interactions. The obtained results are crucial for establishing structure-property relationships as well as for designing substitutes for natural lipids.

Advantages of the classical thermodynamic analysis of single-and multi-component Langmuir monolayers from molecules of biomedical importance-theory and applications

The Langmuir monolayer technique has been successfully used for decades to model biological membranes and processes occurring at their interfaces. Classically, this method involves surface pressure measurements to study interactions within membrane components as well as between external bioactive molecules (e.g. drugs) and the membrane. In recent years, surface-sensitive techniques were developed to investigate monolayers in situ; however, the obtained results are in many cases insufficient for a full characterization of biomolecule-membrane interactions. As result, description of systems using parameters such as mixing or excess thermodynamic functions is still relevant, valuable and irreplaceable in biophysical research. This review article summarizes the theory of thermodynamics of single- and multi-component Langmuir monolayers. In addition, recent applications of this approach to characterize surface behaviour and interactions (e.g. orientation of bipolar molecules, drug-membrane affinity, lateral membrane heterogeneity) are presented.

Phospholipid Molecular Layer that Enhances Distinction of Odors Based on Artificial Sniffing

We propose a novel odor-sensing system based on the dynamic response of phospholipid molecular layers for artificial olfaction. Organisms obtain information about their surroundings based on multidimensional information obtained from sniffing, i.e., periodic perturbations. Semiconductor- and receptor-based odor sensors have been developed previously. However, these sensors predominantly identify odors based on one-dimensional information, which limits the type of odor molecule they can identify. Therefore, the development of odor sensors that mimic the olfactory systems of living organisms is useful to overcome this limitation. In this study, we developed a novel odor-sensing system based on the dynamics of phospholipids that responds delicately to chemical substances at room temperature using multidimensional information obtained from periodic perturbations. Odor molecules are periodically supplied to the phospholipid molecular layer as an input sample. The waveform of the surface tension of the phospholipid molecular layer changes depending on the odor molecules and serves as an output. Such characteristic responses originating from the dynamics of odor molecules on the phospholipid molecular layer can be reproduced numerically. The phospholipid molecular layer amplified the information originating from the odor molecule, and the mechanism was evaluated by using surface pressure-area isotherms. This paper offers a platform for an interface-chemistry-based artificial sniffing system as an active sensor and a novel olfactory mechanism via physicochemical responses of the receptor-independent membranes of the organism.

"Nonlinear" pursuit of understanding pollutant accumulation and chemistry at environmental and biological interfaces

Over the past few decades, the public recognition of the prevalence of certain classes of pollutants, such as perfluoroalkyl substances and nanoplastics, within the environment, has sparked growing concerns over their potential impact on environmental and human health. Within both environmental and biological systems, the adsorption and structural organization of pollutants at aqueous interfaces can greatly impact the chemical reactivity and transformation. Experimentally probing chemical behavior at interfaces can often pose a problem due to bulk solvated molecules convoluting molecular signatures from interfacial molecules. To solve this problem, there exist interface-specific nonlinear spectroscopy techniques that can directly probe both macroscopic planar interfaces and nanoplastic interfaces in aqueous environments. These techniques can provide essential information such as chemical adsorption, structure, and reactivity at interfaces. In this perspective, these techniques are presented with obvious advantages for studying the chemical properties of pollutants adsorbed to environmental and biological interfaces.

Interfacial Inversion, Interference, and IR Absorption in Vibrational Sum Frequency Scattering Experiments

Molecular interfacial structure greatly determines the properties of nano- and microscale systems. Vibrational sum frequency scattering (SFS) spectroscopy is a unique interface-selective tool to measure the interfacial vibrational spectrum of sub-micron to micron-scale objects dispersed in liquid and solid media. The interfacial structure is extracted from the interfacial susceptibility, a physical property derived from the intensity. Here, we describe the effect of infrared absorption that occurs in a bulk medium that is spectroscopically complex and use the results to investigate the effects of interfacial inversion, interfacial interference, and interfacial interference combined with absorption. We use the same three chemicals to do so, hexadecane oil, water, and a neutral Span80 surfactant. For all cases, the effective surface susceptibility can be retrieved from the intensity. We further find that inverting the phases results in different interfacial structures, even though they are composed of the same three chemicals, and explain this in terms of the different interactions that are necessary to stabilize the drops: steric stabilization for water drops in oil vs. charge stabilization for oil drops in water. Interfacial interference can be used to estimate the surface density of different compounds.

Lysozyme Interaction with Phospholipid Nanodroplets Probed by Sum Frequency Scattering Vibrational Spectroscopy

When a nanoparticle (NP) is introduced into a biological environment, its identity and interactions are immediately attributed to the dense layer of proteins that quickly covers the particle. The formation of this layer, dubbed the protein corona, is in general a combination of proteins interacting with the surface of the NP and a contest between other proteins for binding sites either at the surface of the NP or upon the dense layer. Despite the importance for surface engineering and drug development, the molecular mechanisms and structure behind interfacial biomolecule action have largely remained elusive. We use ultrafast sum frequency scattering (SFS) spectroscopy to determine the structure and the mode of action by which these biomolecules interact with and manipulate interfaces. The majority of work in the field of sum frequency generation has been done on flat model interfaces. This limits some important membrane properties such as membrane fluidity and dimensionality─important factors in biomolecule-membrane interactions. To move toward three-dimensional (3D) nanoscopic interfaces, we utilize SFS spectroscopy to interrogate the surface of 3D lipid monolayers, which can be used as a model lipid-based nanocarrier system. In this study, we have utilized SFS spectroscopy to follow the action of lysozyme. SFS spectra in the amide I region suggest that there is lysozyme at the interface and that the lysozyme induces an increased lipid monolayer order. The binding of lysozyme with the NP is demonstrated by an increase in acyl chain order determined by the ratio of the CH₃ symmetric and CH₂ symmetric peak amplitudes. Furthermore, the lipid headgroup orientation s-PO₂^- change strongly supports lysozyme insertion into the lipid layer causing lipid disruption and reorientation. Altogether, with SFS, we have made a huge stride toward understanding the binding and structure change of proteins within the protein corona.

Physicochemical Characteristics of Model Membranes Composed of Legionella gormanii Lipids

Legionella gormanii is one of the species belonging to the genus Legionella, which causes atypical community-acquired pneumonia. The most important virulence factors that enable the bacteria to colonize the host organism are associated with the cell surface. Lipids building the cell envelope are crucial not only for the membrane integrity of L. gormanii but also by virtue of being a dynamic site of interactions between the pathogen and the metabolites supplied by its host. The utilization of exogenous choline by the Legionella species results in changes in the lipids' composition, which influences the physicochemical properties of the cell surface. The aim of this study was to characterize the interfacial properties of the phospholipids extracted from L. gormanii cultured with (PL+choline) and without exogenous choline (PL-choline). The Langmuir monolayer technique coupled with the surface potential (SPOT) sensor and the Brewster angle microscope (BAM) made it possible to prepare the lipid monomolecular films (model membranes) and study their properties at the liquid/air interface at 20 °C and 37 °C. The results indicate the effect of the choline addition to the bacterial medium on the properties of the L. gormanii phospholipid membranes. The differences were revealed in the organization of monolayers, their molecular packing and ordering, degree of condensation and changes in the components' miscibility. These findings are the basis for further research on the mechanisms of adaptation of this pathogen, which by changing the native composition and properties of lipids, bypasses the action of antimicrobial compounds and avoids the host immune attack.

Magnesium Ion Responses of Zwitterionic Phosphatidylethanolamine Head and Tail Groups Elucidated by Frequency-Resolved SFG-VS

In the present study, the effects of magnesium ions on the conformational changes of the deuterated 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (D₅₄-DMPE) monolayer were elucidated by frequency-resolved sum frequency generation vibrational spectroscopy (SFG-VS) and surface pressure-area isotherm measurements. It is found that the tilt angles of the methyl in tail groups decrease, while the tilt angles of the phosphate and methylene in head groups increase during the compression of the DMPE monolayers at both the air/water interface and the air/MgCl₂ solution interfaces. It is also shown that the tilt angle of the methyl in the tail groups slightly decreases, while the tilt angles of the phosphate and methylene in the head groups significantly increase as the MgCl₂ concentration increases from 0 to 1.0 M. These results indicate that both the tail groups and the head groups of the DMPE molecules become closer to the surface normal, as the MgCl₂ concentration increases in the subphase.

Effect of naproxen on the model lipid membrane formed on the water-chitosan subphase

Non steroidal anti-inflammatory drugs (NSAIDs) are those of the most common over the counter (OTC) medications widely used by millions of people every day. Unfortunately, despite their popularity those drugs can cause serious side effects in the digestive system (ulcers, bleeding, and pain). These inconveniences are caused by the changes in the structures of the outer phospholipid layers of gastric mucus and mucosa. As a result the H⁺ ions from the stomach acid can pass easily through these natural protective barriers and damage the epithelial cells which causes ulcers and bleeding. Chitosan as a polysaccharide known for its unique biocompatibility, drug delivery possibilities and wound healing effect has been chosen to examine if it can induce the reduction of undesirable effects of naproxen. This paper focuses on the interactions of the naproxen with a model biological membrane with and without the presence of chitosan. Applying the Langmuir technique coupled with the surface potential measurements and the Brewster angle microscope imaging allowed to characterize successfully examined systems in terms of the monolayer compressibility, thickness, stability, electric properties and morphology. The results proved that the presence of naproxen alters the mechanical and electrical properties of the model membrane depending on its surface pressure. Moreover, the addition of chitosan to the lipid-drug system causes significant changes in the properties of the layer, i.e. a reduction of its compressibility, thickness and morphology modification. Nevertheless, chitosan suppresses some changes induced by naproxen such as alteration of the apparent dipole moment and film stability.

Selective Action of Antimalarial Hydroxychloroquine on the Packing of Phospholipids and Interfacial Water Associated with Lysosomal Model Membranes: A Vibrational Sum Frequency Generation Study

Understanding the structural change of lysosomal membranes induced by hydroxychloroquine (HCQ) drug is essential as it has been considered as one of the probable mechanisms of its antimalarial action. In this context, vibrational sum frequency generation (VSFG) spectra of the O-H region of water and C-H of the hydrocarbon chain of negatively charged and zwitterionic phospholipids associated with the lysosomal membrane in the absence and presence of different concentrations of HCQ have been measured at the air/water interface. The interfacial water at the negatively charged and zwitterionic lipids gets restructured in the presence of HCQ; however, the mechanism of restructuring is different due to the charge of the head groups of lipids. Interestingly, the presence of HCQ leads to a disorder in the negatively charged lipids, irrespective of their chemical nature, mainly by creating the gauche defect in the hydrocarbon chain of the lipid. In contrast, the ordering of the zwitterionic lipid does not show any appreciable change with the addition of HCQ. The finding on the selectivity of HCQ in affecting the ordering of the lipid depending on its head group charge and restructuring of interfacial water may be useful in understanding the molecular level mechanism of the antimalarial action of HCQ.

Direct observation of long-range chirality transfer in a self-assembled supramolecular monolayer at interface in situ

Due to the interest in the origin of life and the need to synthesize new functional materials, the study of the origin of chirality has been given significant attention. The mechanism of chirality transfer at molecular and supramolecular levels remains underexplored. Herein, we study the mechanism of chirality transfer of N, N'-bis (octadecyl)-_L-_/D-(anthracene-9-carboxamide)-glutamic diamide (_L-_/D-GAn) supramolecular chiral self-assembled at the air/water interface by chiral sum-frequency generation vibrational spectroscopy (chiral SFG) and molecular dynamics (MD) simulations. We observe long-range chirality transfer in the systems. The chirality of C_α-H is transferred first to amide groups and then transferred to the anthracene unit, through intermolecular hydrogen bonds and π-π stacking to produce an antiparallel β-sheet-like structure, and finally it is transferred to the end of hydrophobic alkyl chains at the interface. These results are relevant for understanding the chirality origin in supramolecular systems and the rational design of supramolecular chiral materials.

Sum frequency spectroscopy studies on cell membrane fusion induced by divalent cations

Cell membrane fusion is a fundamental biological process involved in a number of cellular living functions. Regarding this, divalent cations can induce fusion of the lipid bilayers through binding and bridging of divalent cations to the charged lipids, thus leading to the cell membrane fusion. How-ever, the elaborate mechanism of cell membrane fusion induced by divalent cations is still needed to be elucidated. Here, surface/interface sensitive sum frequency generation vibrational spectroscopy (SFG-VS) and dynamic light scattering (DLS) were applied in this research to study the responses of phospholipid monolayer to the exposure of divalent metal ions i.e. Ca2+ and Mg2+. According to the particle size distribution results measured by DLS experiments, it was found that Ca2+ could induce inter-vesicular fusion while Mg2+ could not. An octadecyltrichlorosilane self-assembled monolayer (OTS SAM)-lipid monolayer system was designed to model the cell membrane for the SFG-VS experiment. Ca2+ could interact with the lipid PO2− head groups more strongly, resulting in cell membrane fusion more easily, in comparison with Mg2+. No specific interaction between the two metal cations and the C=O groups was observed. However, the C=O orientations changed more after Ca2+-PO2− binding than Mg2+ mediation on lipid monolayer. Meanwhile, Ca2+ could induce dehydration of the lipids (which should be related to the strong Ca2+-PO2− interaction), leading to the reduced hindrance for cell membrane fusion.

Shape-dependent gold nanoparticle interactions with a model cell membrane

Customizable gold nanoparticle platforms are motivating innovations in drug discovery with massive therapeutic potential due to their biocompatibility, stability, and imaging capabilities. Further development requires the understanding of how discrete differences in shape, charge, or surface chemistry affect the drug delivery process of the nanoparticle. The nanoparticle shape can have a significant impact on nanoparticle function as this can, for example, drastically change the surface area available for modifications, such as surface ligand density. In order to investigate the effects of nanoparticle shape on the structure of cell membranes, we directly probed nanoparticle-lipid interactions with an interface sensitive technique termed sum frequency generation (SFG) vibrational spectroscopy. Both gold nanostars and gold nanospheres with positively charged ligands were allowed to interact with a model cell membrane and changes in the membrane structure were directly observed by specific SFG vibrational modes related to molecular bonds within the lipids. The SFG results demonstrate that the +Au nanostars both penetrated and impacted the ordering of the lipids that made up the membrane, while very little structural changes to the model membrane were observed by SFG for the +Au nanospheres interacting with the model membrane. This suggests that the +Au nanostars, compared to the +Au nanospheres, are more disruptive to a cell membrane. Our findings indicate the importance of shape in nanomaterial design and provide strong evidence that shape does play a role in defining nanomaterial-biological interactions.

Impact of Plastic Particles on the Horizontal Transfer of Antibiotic Resistance Genes to Bacterium: Dependent on Particle Sizes and Antibiotic Resistance Gene Vector Replication Capacities

Plastic particles impact the propagation of antibiotic resistance genes (ARGs) in environmental media, and their perturbation on the horizontal gene transfer (HGT) of ARGs is recognized as a critical influencing mechanism. However, studies concerning the influence and influencing mechanisms of plastic particles on the HGT of ARGs were limited, particularly for the effect of particle sizes and ARG vector-associated mechanisms. This study explored the impact of polystyrene (PS) particles with sizes of 75, 90, 100, 1000, and 10000 nm on the HGT (via transformation) of ARGs mediated by pUC19, pSTV29, and pBR322 plasmids into Escherichia coli cells. PS particles with sizes ≤100 nm impacted the transformation of ARGs, but large particles (1000 and 10000 nm) showed no obvious effects. Effects of PS particles on the transfer of three plasmids were vastly distinct. For pUC19 with high replication capacities, the transfer was monotonously promoted. However, for pSTV29 and pBR322 with low replication capacities, suppressing effects were observed. This was attributed to two competing mechanisms. The enhancing mechanism was that the direct interaction of PS particles with membrane lipids and the indirect effect associated with bacterial oxidative stress response induced pore formation on the cell membrane and increased membrane permeability, thus enhancing plasmid entrance. The inhibiting mechanism was that PS particles interfered with plasmid replication inside E. coli, thus decreasing the bacterial tranformation. This study deepened our understanding of the environmental dissemination of ARGs in plastic contamination.

Interaction mechanism of chitosan oligomers in pure water with cell membrane models studied by SFG vibrational spectroscopy

Chitosan is a versatile and biocompatible cationic antimicrobial polymer obtained from sustainable sources that is effective against a wide range of microorganisms. Although it is soluble only at low pH, chitosan oligomers (ChitO) are soluble in pure water and thus more appropriate for antibacterial applications. Although there is a vast literature on chitosan's antimicrobial activity, the molecular details of its interaction with biomembranes remain unclear. Here we investigate these molecular interactions by resorting to phospholipid Langmuir films (zwitterionic DPPC and anionic DPPG) as simplified membrane models (for mammalian and bacterial membranes, respectively), and using SFG vibrational spectroscopy to probe lipid tail conformation, headgroup dynamics and interfacial water orientation. For comparison, we also investigate the interactions of another simple cationic antimicrobial polyelectrolyte, poly(allylamine) hydrochloride - PAH. By forming the lipid films over the polyelectrolyte solutions, we found that both have only a very small interaction with DPPC, but PAH adsorption is able to invert the interfacial water orientation (membrane potential). This might explain why ChitO is compatible with mammalian cells, while PAH is toxic. In contrast, their interaction with DPPG films is much stronger, even more so for ChitO, with both insertion within the lipid film and interaction with the oppositely charged headgroups. Again, PAH adsorption inverts the membrane potential, while ChitO does not. Finally, ChitO interaction with DPPG is weaker if the antimicrobial is injected underneath a pre-assembled Langmuir film, and its interaction mode depends on the time interval between end of film compression and ChitO injection. These differences between ChitO and PAH effects on the model membranes highlight the importance of molecular structure and intermolecular interactions for their bioactivity, and therefore this study may provide insights for the rational design of more effective antimicrobial molecules.

Structural investigation of sulfobetaines and phospholipid monolayers at the air-water interface

Mixtures of sulfobetaine based lipids with phosphocholine phospholipids are of interest in order to study the interactions between zwitterionic surfactants and the phospholipids present in cell membranes. In this study we have investigated the structure of mixed monolayers of sulfobetaines and phosphocholine phospholipids. The sulfobetaine used has a single 18-carbon tail, and is referred to as SB3-18, and the phospholipid used is DMPC. Surface pressure-area isotherms of the samples were used to determine whether any phase transitions were present during the compression of the monolayers. Neutron and X-ray reflectometry were then used to investigate the structure of these monolayers perpendicular to the interface. We found that the average headgroup and tail layer thickness was reasonably consistent across all mixtures, with a variation of less than 3 Å reported in the total thickness of the monolayers at each surface pressure. However, by selective deuteration of the two components of the monolayers, it was found that the two components have different tail layer thicknesses. For the mixture with equal compositions of DMPC and SB3-18 or with a higher composition of DMPC the tail tilts were found to be constant, resulting in a greater tail layer thickness for SB3-18 due to its longer tail. For the mixture higher in SB3-18 this was not the case, the tail tilt angle for the two components was found to be different and DMPC was found to have a greater tail layer thickness than SB3-18 as a result.

Effect of deuteration on a phosphatidylcholine lipid monolayer structure: New insights from vibrational sum-frequency generation spectroscopy

We used vibrational sum-frequency generation (VSFG) spectroscopy to elucidate the possible effect of various levels of isotopic substitution (H/D) on the properties of the DPPC monolayer by probing DPPC/D₂O interface. We found that deuteration of the choline group has a great impact on monolayer properties, while monolayers with deuterated alkyl chains do not exhibit any differences under our experimental conditions. In addition, deuteration of the choline group strongly affected the hydration of the phosphate group. We showed by probing symmetric stretching vibration of phosphate group that denser packing only slightly reduced the hydration of DPPC-d13 and DPPC-d75 monolayers. Moreover, addition of calcium ions, which generally cause a marked dehydration of the lipid monolayer, had no effect on lipid monolayers with deuterated choline group. We proposed that one way to explain this experimental finding could be deuteration induced changes in the structure of lipid's choline group, resulting in a well-hydrated but Ca²⁺ ion blocking structure. These results have important implications for various spectroscopic techniques, which commonly use deuteration of phospholipids to circumvent overlapping between vibrational bands.

Interactions between O2 Nanobubbles and the Pulmonary Surfactant in the Presence of Inhalation Medicines

A dispersion of oxygen nanobubbles (O2-NBs) is an extraordinary gas-liquid colloidal system where spherical gas elements can be considered oxygen transport agents. Its conversion into inhalation aerosol by atomization with the use of nebulizers, while maintaining the properties of the dispersion, gives new opportunities for its applications and may be attractive as a new concept in treating lung diseases. The screening of O2-NBs interactions with lung fluids is particularly needed in view of an O2-NBs application as a promising aerosol drug carrier with the additional function of oxygen supplementation. The aim of the presented studies was to investigate the influence of O2-NBs dispersion combined with the selected inhalation drugs on the surface properties of two types of pulmonary surfactant models (lipid and lipid-protein model). The characteristics of the air-liquid interface were carried out under breathing-like conditions using two selected tensiometer systems: Langmuir-Wilhelmy trough and the oscillating droplet tensiometer. The results indicate that the presence of NBs has a minor effect on the dynamic characteristics of the air-liquid interface, which is the desired effect in the context of a potential use in inhalation therapies.

Tutorials in vibrational sum frequency generation spectroscopy. III. Collecting, processing, and analyzing vibrational sum frequency generation spectra

In this Tutorial series, we aim to provide an accessible introduction to vibrational sum frequency generation (VSFG) spectroscopy, targeted toward people entering the VSFG world without a rigorous formal background in optical physics or nonlinear spectroscopy. In this article, we discuss in detail the processes of collecting and processing VSFG data, and user-friendly processing software (sfgtools) is provided for use by people new to the field. Some discussion of analyzing VSFG spectra is also given, specifically with a discussion of fitting homodyne VSFG spectra, and a discussion of what can be learned (both qualitatively and quantitatively) from VSFG spectra.

Carbon Nanoparticle-Induced Changes to Lipid Monolayer Structure at Water-Air Interfaces

Surface specific vibrational spectroscopy experiments together with surface tension measurements and spectroscopic ellipsometry data were used to characterize the effects of soluble carbon particulates on compressed and partially compressed lipid monolayers adsorbed to the water-air interface. The lipid monolayers consisted of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DPPC), and measurements were made for both tightly packed monolayers (40 Ų/molecule) and monolayers in their liquid condensed state (55 Ų/molecule). Langmuir trough data show that very small amounts of PHF (0.0075 mg/mL or 6.4 × 10^-6 M) decrease lipid film compressibility. This finding supports a cooperative adsorption mechanism whereby the soluble PHFs are drawn to the surface and associate with the insoluble DPPC monolayer. Excess free energies (ΔG_mix^E) were positive, consistent with the cooperative adsorption mechanism, and although the excess free energies are small (≤1 kJ/mol), adsorbed PHF has measurable effects on monolayer structure. Further support for the cooperative adsorption mechanism at the water-air interface comes from vibrational sum frequency generation (VSFG) experiments. Low PHF concentrations (≤0.06 mg/mL) increase DPPC acyl chain ordering in liquid condensed lipid films and decrease DPPC acyl chain ordering and film thickness in tightly packed lipid films.

Mechanism by Which Cholesterol Induces Sphingomyelin Conformational Changes at an Air/Water Interface

This work investigates the interactions in cholesterol and sphingomyelin monolayers at the molecular level by high-resolution broadband sum frequency generation vibrational spectroscopy (HR-BB-SFG-VS). The SFG spectra of natural egg sphingomyelin (ESM) as a function of cholesterol concentration are obtained at an air/water interface under different polarization combinations. The analysis of the spectra shows that cholesterol can induce sphingomyelin conformational changes at an air/water interface. The mechanism is proposed. When cholesterol is inserted into the ESM monolayer, the inherent intramolecular hydrogen bonds between the phosphate moiety and 3OH in the sphingosine backbones are destroyed. During this process, the sphingosine backbones become more ordered, while the conformation of the N-linked long acid chain remains unaltered. The OH of the cholesterol head group can bind to the -PO^-2 of the ESM molecule, and the orientation of the -PO^-2 in the head groups changes to be more parallel to the interface.

The effect of chitosan/TiO2/hyaluronic acid subphase on the behaviour of 1,2-dioleoyl-sn-glycero-3-phosphocholine membrane

The main aim of the study was to determine the effect of two polysaccharides: chitosan (Ch) and hyaluronic acid (HA), and/or titanium dioxide (TiO₂) on the structure and behaviour of the 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) membrane. To achieve this goal the surface pressure as a function of the area per molecule (π-A) isotherm for the phospholipid monolayer was recorded. The shape of the π-A isotherms and compression-decompression cycles, as well as the compression modulus values, were analysed in terms of biocompatibility. Besides, morphology and thickness of the phospholipid layers obtained by means of Brewster angle microscope at different π, were determined. The obtained results show that both polysaccharides Ch, HA, as well inorganic TiO₂ affect slightly the structure of the DOPC monolayer but do not disrupt it. Their presence brings no typical arrangements of both the polar heads and tails of DOPC molecules at the interface.

Phospholipid acyl tail affects lipid headgroup orientation and membrane hydration

Biomembrane hydration is crucial for understanding processes at biological interfaces. While the effect of the lipid headgroup has been studied extensively, the effect (if any) of the acyl chain chemical structure on lipid-bound interfacial water has remained elusive. We study model membranes composed of phosphatidylethanolamine (PE) and phosphatidylcholine (PC) lipids, the most abundant lipids in biomembranes. We explore the extent to which the lipid headgroup packing and associated water organization are affected by the lipid acyl tail unsaturation and chain length. To this end, we employ a combination of surface-sensitive techniques, including sum-frequency generation spectroscopy, surface pressure measurements, and Brewster angle microscopy imaging. Our results reveal that the acyl tail structure critically affects the headgroup phosphate orientational distribution and lipid-associated water molecules, for both PE and PC lipid monolayers at the air/water interface. These insights reveal the importance of acyl chain chemistry in determining not only membrane fluidity but also membrane hydration.

Thiocyanate Ions Form Antiparallel Populations at the Concentrated Electrolyte/Charged Surfactant Interface

Anions play significant roles in the separation of lanthanides and actinides. The molecular-scale details of how these anions behave at aqueous interfaces are not well understood, especially at high ionic strengths. Here, we describe the interfacial structure of thiocyanate anions at a soft charged interface up to 5 M bulk concentration with combined classical and phase-sensitive vibrational sum frequency generation (PS-VSFG) spectroscopy and molecular dynamics (MD) simulations. At low concentrations thiocyanate ions are mostly oriented with their sulfur end pointing toward the charged surfactants. The VSFG signal reaches a plateau at around 100 mM bulk concentration, followed by significant changes above 1 M. At high concentrations a new thiocyanate population emerges with their sulfur end pointing toward the bulk liquid. The -CN stretch frequency is different for up and down oriented SCN^- ions, indicating different coordination environments. These results provide key molecular-level insights for the interfacial behavior of complex anions in highly concentrated solutions.

Evaluating the Impact of Hydrophobic Silicon Dioxide in the Interfacial Properties of Lung Surfactant Films

The interaction of hydrophobic silicon dioxide particles (fumed silicon dioxide), as model air pollutants, and Langmuir monolayers of a porcine lung surfactant extract has been studied in order to try to shed light on the physicochemical bases underlying the potential adverse effects associated with pollutant inhalation. The surface pressure-area isotherms of lung surfactant (LS) films including increasing amounts of particles revealed that particle incorporation into LS monolayers modifies the organization of the molecules at the water/vapor interface, which alters the mechanical resistance of the interfacial films, hindering the ability of LS layers for reducing the surface tension, and reestablishing the interface upon compression. This influences the normal physiological function of LS as is inferred from the analysis of the response of the Langmuir films upon the incorporation of particles against harmonic changes of the interfacial area (successive compression-expansion cycles). These experiments evidenced that particles alter the relaxation mechanisms of LS films, which may be correlated to a modification of the transport of material within the interface and between the interface and the adjacent fluid during the respiratory cycle.

Investigating Bénard–Marangoni migration at the air–water interface in the time domain using sum frequency generation (SFG) spectroscopy of palmitic acid monolayers

Sum-frequency generation (SFG) spectroscopy is frequently used to investigate the structure of monolayer films of long-chain fatty acids at the air–water interface. Although labeled a non-invasive technique, introducing intense SFG lasers onto liquid interfaces has the potential to perturb them. In the present work, narrowband picosecond SFG is used to study the structural changes that occur in palmitic acid and per-deuterated palmitic acid monolayers at the air–water interface in response to the high field strengths inherent to SFG spectroscopy. In order to determine structural changes and identify measurement artifacts, the changes in specific resonance intensities were measured in real-time and over a broad range of surface concentrations from films spread onto a stationary Langmuir trough. Using narrowband instead of broadband SFG minimizes the overlap of the incident infrared beam in the lipid C–H stretching region with resonances from the water sub-phase. Nevertheless, narrowband SFG still generates a thermal gradient at the surface, which produces a significant decrease in local concentration in the area of the laser spot caused by Bérnard–Marangoni convection originating in the sub-phase. The decrease in concentration results in an increase in the conformational disorder and a decrease in the tilt angle of lipid tails. Crucially, it is shown that, even at the highest monolayer concentrations, this gives rise to a measurement effect, which manifests itself as a dependence on the spectral acquisition time. This effect should be taken into account when interpreting the structure of monolayer films on liquid surfaces deduced from their SFG spectra.

Hydrocarbon Penetration into Phospholipid Monolayers Formed at Hydrocarbon-Water Interfaces

Phospholipid monolayers formed at oil-water interfaces are used for various biological applications. However, monolayer structures are not well understood. Herein, we investigated hydrocarbon partitioning in 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine monolayers formed at hydrocarbon-water interfaces using fluorescence microscopy and pendant drop tensiometry. The monolayers strongly interacted with squalene, n-hexadecane, n-tetradecane, n-dodecane, n-decane, and n-butylcyclohexane. These alkane and alkylcyclohexane molecules remained within the monolayers during area compression. In contrast, the monolayers interacted weakly with n-pentylbenzene and n-butylbenzene. These alkylbenzenes were gradually removed from the monolayers upon area compression and were completely expelled at an area per lipid of ∼70 Ų. Surface pressure analysis indicated that the ability of hydrocarbons to penetrate the monolayers was enhanced in the order of n-butylbenzene < n-pentylbenzene < n-butylcyclohexane < n-hexadecane.

Interactions of model airborne particulate matter with dipalmitoyl phosphatidylcholine and a clinical surfactant Calsurf

HYPOTHESIS

Lung surfactant protects lung tissue and reduces the surface tension in the alveoli during respiration. Particulate matter with an aerodynamic diameter of less than 2.5 μm (PM_2.5), which invades primely through inhalation, can deposit on and interact with the surfactant layer, leading to changes in the biophysical and morphological properties of the lung surfactant.

EXPERIMENTS

Langmuir monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and clinical surfactant Calsurf were investigated with a PM_2.5 model injected into the water subphase, which were characterized by surface pressure-area isotherms, Brewster angle microscopy, atomic force microscopy, fluorescent microscopy, and x-ray photoelectron spectroscopy. The binding between DPPC/Calsurf and PM_2.5 was studied using isothermal titration calorimetry.

FINDINGS

PM_2.5 induced the expansion of the monolayers at low surface pressure (п) and film condensation at high п. Aggregation of PM_2.5 mainly occurred at the interface of liquid expanded/liquid condensed (LE/LC) phases. PM_2.5 led to slimmer and ramified LC domains on DPPC and the reduction of nano-sized condensed domains on Calsurf. Both DPPC and Calsurf showed fast binding with PM_2.5 through complex binding modes attributed to the heterogeneity and amphiphilic property of PM_2.5. This study improves the fundamental understanding of PM_2.5-lung surfactant interaction and shows useful implications of the toxicity of PM_2.5 through respiration process.

Interfacial behavior of phospholipid monolayers revealed by mesoscopic simulation

A mesoscopic model with molecular resolution is presented for dipalmitoyl phosphatidylcholine (DPPC) and palmitoyl oleoyl phosphatidylcholine (POPC) monolayer simulations at the air-water interface using many-body dissipative particle dynamics (MDPD). The parameterization scheme is rigorously based on reproducing the physical properties of water and alkane and the interfacial property of the phospholipid monolayer by comparison with experimental results. Using much less computing cost, these MDPD simulations yield a similar surface pressure-area isotherm as well as similar pressure-related morphologies as all-atom simulations and experiments. Moreover, the compressibility modulus, order parameter of lipid tails, and thickness of the phospholipid monolayer are quantitatively in line with the all-atom simulations and experiments. This model also captures the sensitive changes in the pressure-area isotherms of mixed DPPC/POPC monolayers with altered mixing ratios, indicating that the model is promising for applications with complex natural phospholipid monolayers. These results demonstrate a significant improvement of quantitative phospholipid monolayer simulations over previous coarse-grained models.