Dissolution of ZnO nanoparticles at circumneutral pH: a study of size effects in the presence and absence of citric acid

Methanogenic response of paddy soils exposed to zinc oxide nanoparticles and sulfurized products

The use of zinc oxide nanoparticles (ZnO NPs) in agriculture is expanding, yet their effects on microbial ecology in flooded paddy soils remain unclear. This study examined the influence of ZnO NPs and their sulfide derivatives (S-ZnO NPs) on methane production in paddy soils. Results showed that ZnO NPs at a concentration of 1000 mg/kg significantly inhibited methane production by 28.97 % in an acid soil and by 26.83 % in an alkaline soil. S-ZnO NPs at the same concentration did not significantly affect methane production in the alkaline soil and increased it by 15.33 % in the acid soil. High-throughput sequencing revealed that ZnO NPs significantly altered the microbial community structure, affecting the prevalence of methanogenic organisms like Methanosarcina in the acid soil and Methanobacterium in the alkaline soil. Quantitative PCR analysis showed a reduction in the expression of methanogenic gene (mcrA) and total bacterial 16S rRNA genes with ZnO NPs exposure, but S-ZnO NPs had a lesser impact on these genes. This research highlights the more toxic impact of ZnO NPs compared to S-ZnO NPs on methane production and microbial communities in paddy soils, emphasizing the necessity for careful evaluation of nanoparticles in agricultural use to avoid ecological disturbances.

On-demand release of encapsulated ZnO nanoparticles and chemotherapeutics for drug delivery applications

Nanomedicines offer high promise for the treatment of various diseases, and numerous novel approaches using nanomaterials have been developed over the years. In this report, we introduce a new strategy utilizing ZnO nanoparticles (nZnO) to trigger the rapid release of lipid-encapsulated therapeutics upon photo-irradiation with UV light (365 nm). In vitro studies demonstrate that encapsulation of nZnO effectively eliminates the cytotoxicity of nZnO, but this can be re-established upon release from the lipid coating. Using 5(6)-carboxyfluorescein as a model for hydrophilic drug loading, we show the ability to co-load drugs with nZnO into liposomes. Kinetic studies reveal the ability to release the majority of the dye within 60 minutes post-photo-irradiation and provide insights into factors that impact release kinetics. To further explore this, Jurkat T cell leukemia and T47D breast cancer cells were treated with co-encapsulated nZnO and the hydrophobic cancer drug paclitaxel. These studies revealed enhanced toxicity of the triggered release groups with an extreme difference noted in the viability profiles of the T47D breast cancer cell model. Taken together, these studies indicate that this system of co-encapsulating nZnO and chemotherapeutic drugs has the potential to minimize systemic toxicity, by controlling therapeutic release, while allowing for the localized selective destruction of cancer.

Adsorption of l-Cysteine and Cysteamine on Zinc Oxide Nanoparticles

The reaction of l-cysteine and cysteamine hydrochloride with zinc oxide nanoparticles (ZnO NPs), by stirring excess reactant with the NPs in ethanol, has been studied by thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Raman spectroscopy. l-Cysteine adsorption occurs via the thiol functional group, and there is no evidence for bonding via the carboxylic acid or amine functionalities. However, Raman spectroscopy and XPS reveal some protonated thiol, suggesting unbound l-cysteine is also present, as confirmed by XRD that shows the presence of l-cysteine crystallites. In the case of cysteamine/ZnO, TGA indicates that a large fraction of the sample is organic, and Raman spectroscopy reveals a dramatic shift in the C-S stretch from 796 cm-1 for unreacted cysteamine to 837 cm-1 for the reacted cysteamine. It is postulated that the acidic and chelating nature of the reaction causes dissolution of some Zn2+ ions that form a Zn(II) coordination complex with cysteamine. These studies have implications for biomolecular applications in which ZnO nanoparticles are used for biosensors, bioimaging, and drug delivery.

Examining the Influence of Zinc Oxide Nanoparticles and Bulk Zinc Oxide on Rat Brain Functions: a Comprehensive Neurobehavioral, Antioxidant, Gene Expression, and Histopathological Investigation

The study aimed to assess the impact of zinc oxide nanoparticles (ZnONPs) on rats' neurobehavior compared to bulk zinc oxide (BZnO). Thirty male Sprague-Dawley rats were randomly assigned to five groups. The control group received Tween 80 (10%), while the ZnONP groups were given ZnONPs at 5 and 10 mg/kg body weight dosages, and the bulk zinc oxide (BZnO) groups received BZnO at the same dosages. Behavioral observations, neurobehavioral examinations, and assessments of brain tissue oxidative markers, neurotransmitter levels, and histopathological changes were performed. The results indicated that ZnONP at a dosage of 5 mg/kg improved general behavior, locomotor activity, memory, and recognition and reduced fearfulness in rats. Conversely, the higher dosage of 10 mg/kg and the bulk form had adverse effects on general behavior, locomotor activity, and learning ability, with the bulk form demonstrating the most severe impact-znONP-5 treatment increased antioxidant enzyme levels and decreased inflammatory markers. BZnO-5 exhibited lower oxidative stress markers, although still higher than BZnO-10. Furthermore, ZnONP-5 and BZnO-5 increased neurotransmitter levels compared to higher dosages. ZnONP-5 upregulated the expression of brain-derived neurotrophic factor (BDNF) mRNA, while BZnO-5 showed increased BDNF mRNA expression and decreased expression of genes related to apoptosis and inflammation. In summary, ZnONPs at 5 mg/kg demonstrated positive effects on rat brain function and behavior, while higher dosages and the bulk form had detrimental effects. In conclusion, the studies emphasized the importance of further assessing various doses and forms of zinc oxide on brain health, highlighting the significance of dosage considerations when using nanomaterials.

Antioxidant-related enzymes and peptides as biomarkers of metallic nanoparticles (eco)toxicity in the aquatic environment

Increased awareness of the impact of human activities on the environment has emerged in recent decades. One significant global environmental and human health issue is the development of materials that could potentially have negative effects. These materials can accumulate in the environment, infiltrate organisms, and move up the food chain, causing toxic effects at various levels. Therefore, it is crucial to assess materials comprising nano-scale particles due to the rapid expansion of nanotechnology. The aquatic environment, particularly vulnerable to waste pollution, demands attention. This review provides an overview of the behavior and fate of metallic nanoparticles (NPs) in the aquatic environment. It focuses on recent studies investigating the toxicity of different metallic NPs on aquatic organisms, with a specific emphasis on thiol-biomarkers of oxidative stress such as glutathione, thiol- and related-enzymes, and metallothionein. Additionally, the selection of suitable measurement methods for monitoring thiol-biomarkers in NPs' ecotoxicity assessments is discussed. The review also describes the analytical techniques employed for determining levels of oxidative stress biomarkers.

Lettuce (Lactuca sativa L.) alters its metabolite accumulation to cope with CuO nanoparticles by promoting antioxidant production and carbon metabolism

Copper-based nanoparticles (NPs) are gradually being introduced as sustainable agricultural nanopesticides. However, the effects of NPs on plants requires carefully evaluation to ensure their safe utilization. In this study, leaves of 2-week-old lettuce (Lactuca sativa L.) were exposed to copper oxide nanoparticles (CuO-NPs, 0 [CK], 100 [T1], and 1000 [T2] mg/L) for 15 days. A significant Cu accumulation (up to 1966 mg/kg) was detected in lettuce leaves. The metabolomics revealed a total of 474 metabolites in lettuce leaves, and clear differences were observed in the metabolite profiles of control and CuO-NPs treated leaves. Generally, phenolic acids and alkaloids, which are important antioxidants, were significantly increased (1.26-4.53 folds) under foliar exposure to NPs; meanwhile, all the significantly affected flavonoids were down-regulated after CuO-NP exposure, indicating these flavonoids were consumed under oxidative stress. Succinic and citric acids, which are key components of the tricarboxylic acid cycle, were especially increased under T2, suggesting the energy and carbohydrate metabolisms were enhanced under high-concentration CuO-NP treatment. There was also both up- and down-regulation of fatty acids, suggesting cell membrane fluidity and function responded to CuO-NPs. Galactinol, which is related to galactose metabolism, and xanthosine, which is crucial in purine and caffeine metabolism, were down-regulated under T2, indicating decreased stress resistance and disturbed nucleotide metabolism under the high CuO-NP dose. Moreover, the differentially accumulated metabolites were significantly associated with plant growth and its antioxidant ability. Future work should focus on controlling the overuse or excessive release of NPs into agricultural ecosystems to limit their adverse effects.

Sustained release of Zn from zinc sulfide nanoparticles (ZnS NPs) amplified the bioaccessibility of Zn in soil: Adsorption dynamics and dissolution kinetics

Controlled-release micronutrient supplementation to provide better bioavailable zinc (Zn) under alkaline soil conditions is a concept of commercial pertinence for sustainable agriculture. High pH stable nano-scaled ZnS is the material under study in the present investigation where the adsorption dynamics and dissolution kinetics of sono-chemically synthesized zinc sulfide nanoparticles (ZnS NPs) were evaluated in comparison to ZnSO4 in Lufa 2.2 soil for supplementation of Zn. The mechanism of adsorption of ZnS NPs and ZnSO4 onto Lufa 2.2 soil was well explained by fitting into the Freundlich adsorption model and pseudo-second order equation. ZnS NPs reflected the stronger ability to get adsorbed on the Lufa 2.2 soil as compared to metal ions, due to higher surface reactivity of NPs and higher Kf value (0.557) than ZnSO4 (0.463). Time relevant enhancement in extractability of Zn from ZnS NPs amended soil and diminution in extractability of Zn from ZnSO4 spiked soil was observed in bioavailability studies. The increased labile pool of Zn from ZnS NPs amended soil over time was due to their slow dissolution in soil and could be adjusted to consider as "sustained released ZnS NPs". Dissolution of ZnS nanoparticles (NPs) in Lufa 2.2 soil adhered to the first-order extraction model, exhibiting extended half-lives of 27.72 days (low dose) and 28.87 days (high dose). This supported prolonged stability, increased reactivity, and reduced ecological risk compared to conventional Zn salt fertilizers, promoting enhanced crop productivity.

Lowering the pH leads to the disaggregation of NiO and ZnO nanoparticles and modifies the mutagenic response

In a changing environmental scenario, acid rain can have a significant impact on aquatic ecosystems. Acidification is known to produce corrosion in metals, hence increasing their harmful effects on the environment, organisms and human health. The prevalent use of metallic nanoparticles (NPs) in everyday products raises concerns regarding exposure and nanotoxicity even in these acidified conditions. We thus report on the cytotoxic and genotoxic potential of nickel oxide (NiO-NP) and zinc oxide (ZnO-NP) NPs when suspended in aqueous media in light of pH variations (7.5 and 5). A modified microsuspension method of the Salmonella/microsome assay was adopted, and strains (TA97a, TA98, TA100, TA102) were exposed to NPs (10-1280 μg/plate) with and without a metabolization fraction. The acidic condition favored disaggregation and caused a decrease in NPs size. Mutagenicity was observed in all samples and different strains, with greater DNA base pair substitution damage (TA100 and TA102), but extrinsic conditions (pH) suggest different action mechanisms of NiO-NP and ZnO-NP on genetic content. Mutagenic activity was found to increase upon metabolic activation (TA98, TA100, and TA102) demonstrating the bioactivity of NiO-NP and ZnO-NP in relation to metabolites generated by the mammalian p450 system in vitro. Modifications in the Salmonella assay methodology increased cell exposure time. The observed responses recommend this modified assay as one of the methodologies of choice for nanoecotoxicological evaluation. These findings emphasize the significance of incorporating the environmental context when evaluating the toxicity of metal-based NPs.

An Innovative Approach to Alleviate Zinc Oxide Nanoparticle Stress on Wheat through Nanobubble Irrigation

The extensive utilization of zinc oxide nanoparticles in consumer products and the industry has led to their substantial entry into the soil through air and surface runoff transportation, which causes ecotoxicity in agro-ecosystems and detrimental effects on crop production. Nanobubbles (diameter size < 1 µm) have many advantages, such as a high surface area, rapid mass transfer, and long retention time. In this study, wheat seedlings were irrigated with a 500 mg L-1 zinc oxide nanoparticle solution delivered in the form of nanobubble watering (nanobubble-ZnO-NPs). We found that nanobubble watering improved the growth and nutrient status of wheat exposed to zinc oxide nanoparticles, as evidenced by increased total foliar nitrogen and phosphorus, along with enhanced leaf dry mass per area. This effect can be attributed to nanobubbles disassembling zinc oxide aggregates formed due to soil organic carbon, thereby mitigating nutrient absorption limitations in plants. Furthermore, nanobubbles improved the capability of soil oxygen input, leading to increased root activity and glycolysis efficiency in wheat roots. This work provides valuable insights into the influence of nanobubble watering on soil quality and crop production and offers an innovative approach for agricultural irrigation that enhances the effectiveness and efficiency of water application.

Biogenic zinc oxide nanoparticles: A viable agricultural tool to control plant pathogenic fungi and its potential effects on soil and plants

Fungal and bacterial pathogens represent some of the greatest challenges facing crop production globally and account for about 20-40 % crop losses annually. This review highlights the use of ZnO NPs as antimicrobial agents and explores their mechanisms of actions against disease causing plant fungal pathogens. The behavior of ZnO NPs in soil and their interactions with the soil components were also highlighted. The review discusses the potential effects of ZnO NPs on plants and their mechanisms of action on plants and how these mechanisms are related to their physicochemical properties. In addition, the reduction of ZnO NPs toxicity through surface modification and coating with silica is also addressed. Soil properties play a significant role in the dispersal, aggregation, stability, bioavailability, and transport of ZnO NPs and their release into the soil. The transport of ZnO NPs into the soil might influence soil components and, as a result, plant physiology. The harmful effects of ZnO NPs on plants and fungi are caused by a variety of processes, the most important of which is the formation of reactive oxygen species, lysosomal instability, DNA damage, and the reduction of oxidative stress by direct penetration/liberation of Zn2+ ions in plant/fungal cells. Based on these highlighted areas, this review concludes that ZnO NPs exhibit its antifungal activity via generations of reactive oxygen species, coupled with the inhibition of various metabolic pathways. Despite the numerous advantages of ZnO NPs, there is need to regulate its uses to minimize the harmful effects that may arise from its applications in the soil and plants.

Phototransformation of phosphite induced by zinc oxide nanoparticles (ZnO NPs) in aquatic environments

Phosphite, an essential component in the biogeochemical phosphorus cycle, may make significant contributions to the bioavailable phosphorus pool as well as water eutrophication. However, to date, the potential impacts of coexisting photochemically active substances on the environmental fate and transformation of phosphite in aquatic environments have been sparsely elucidated. In the present study, the effect of zinc oxide nanoparticles (ZnO NPs), a widely distributed photocatalyst in aquatic environments, on phosphite phototransformation under simulated solar irradiation was systematically investigated. The physicochemical characteristics of the pristine and reacted ZnO NPs were thoroughly characterized. The results showed that the presence of ZnO NPs induced the indirect phototransformation of phosphite to phosphate, and the reaction rate increased with increasing ZnO NPs concentration. Through experiments with quenching and trapping free radicals, it was proved that photogenerated reactive oxygen species (ROS), such as hydroxyl radical (•OH), superoxide anion (O2•-), and singlet oxygen (1O2), made substantial contributions to phosphite phototransformation. In addition, the influencing factors such as initial phosphite concentration, pH, water matrixes (Cl-, F-, Br-, SO42-, NO3-, NO2-, HCO3-, humic acid (HA) and citric acid (CA)) were investigated. The component of generated precipitates after the phosphite phototransformation induced by ZnO NPs was still dominated by ZnO NPs, while the presence of amorphous Zn3(PO4)2 was identified. This work explored ZnO NPs-mediated phosphite phototransformation processes, indicating that nanophotocatalysts released into aquatic environments such as ZnO NPs may function as photosensitizers to play a beneficial role in the transformation of phosphite to phosphate, thereby potentially mitigating the toxicity of phosphite to aquatic organisms while exacerbating eutrophication. The findings of this study provide a novel insight into the comprehensive assessment of the environmental fate, potential ecological risk, and biogeochemical behaviors of phosphite in natural aquatic environments under the condition of combined pollution.

Nanomaterials in sunscreens: Potential human and ecological health implications

Inorganic nanomaterials such as TiO2 and ZnO provide significant benefits in terms of UV protection, and their use generally has increased in commercial sunscreens. However, more recently there have been concerns about their potential human and ecological health implications, mostly driven by perception rather than by formal assessments. The large and increasing body of literature on these nanomaterials indicates that in most circumstances their risk are minimal. Penetration of the human epidermis is minimal for these nanomaterials, significantly reducing the potential effects that these nanomaterials may pose to internal organs. The excess Zn ion dose is very small compared to normal dietary consumption of Zn, which is a necessary element. The levels of residual nanomaterials or released ions in public swimming pools is also low, with minimal effect in case this water is ingested during swimming or bathing. In natural environments with significant water flow due to wind and water currents, the concentrations of nanomaterials and released ions are generally well below levels that would cause effects in aquatic organisms. However, sensitive habitats with slow currents, such as coral reefs, may accumulate these nanomaterials. The number of studies of the levels and effects of nanomaterials in these sensitive habitats is very small; more research is needed to determine if there is an elevated risk to these ecosystems from the use of sunscreens with these nanomaterials.

Food Additive Solvents Increase the Dispersion, Solubility, and Cytotoxicity of ZnO Nanoparticles

Zinc oxide (ZnO) nanoparticles (NPs) are utilized as a zinc (Zn) fortifier in processed foods where diverse food additives can be present. Among them, additive solvents may strongly interact with ZnO NPs by changing the dispersion stability in food matrices, which may affect physico-chemical and dissolution properties as well as the cytotoxicity of ZnO NPs. In this study, ZnO NP interactions with representative additive solvents (methanol, glycerin, and propylene glycol) were investigated by measuring the hydrodynamic diameters, solubility, and crystallinity of ZnO NPs. The effects of these interactions on cytotoxicity, cellular uptake, and intestinal transport were also evaluated in human intestinal cells and using in vitro human intestinal transport models. The results revealed that the hydrodynamic diameters of ZnO NPs in glycerin or propylene glycol, but not in methanol, were significantly reduced, which is probably related to their high dispersion and increased solubility under these conditions. These interactions also caused high cell proliferation inhibition, membrane damage, reactive oxygen (ROS) generation, cellular uptake, and intestinal transport. However, the crystal structure of ZnO NPs was not affected by the presence of additive solvents. These findings suggest that the interactions between ZnO NPs and additive solvents could increase the dispersion and solubility of ZnO NPs, consequently leading to small hydrodynamic diameters and different biological responses.

Chemical Dissolution-Assisted Ultrafine Grinding for Preparation of Quasi-Spherical Colloids of Zinc Oxide

Submicron-sized quasi-spherical zinc oxide (ZnO) particles were prepared by wet ultrafine grinding in a stirred media mill under various conditions. The effects of parameters (i.e., solution type, acid or alkali concentration, solid content and grinding time) on the particle median size (d₅₀), particle size distribution (PSD) and sphericity of ZnO particles was investigated. The results show that submicron-sized quasi-spherical particles (i.e., d₅₀: 370 nm, uniformity coefficient (n) of 2.28 and sphericity of 0.91) can be obtained when the micron-sized ZnO particles are ground for 30 min in a CH₃COOH solution at a concentration of 0.010 mol/L with 20 wt.% of solid content. The chemical dissolution of ZnO particles ground in the presence and absence of acetic acid is discussed. It is indicated that chemical dissolution accelerated due to the mechanochemical effects could reduce the particle size, obtain a narrower PSD and enhance the sphericity. In addition, the functions of selection and breakage were used to analyze the grinding mechanism of ZnO particles.

Transformation of zinc oxide nanoparticles in the presence of aluminum oxide with pre-sorbed phosphorus ligands

Naturally occurring oxides could react with zinc oxide (ZnO) nanoparticles (NPs) and then change its transformation and toxicity to ecological receptors. The reaction may be affected by a variety of environmental factors, yet the relevant processes and mechanisms are limitedly investigated. Natural prevalent ligands, as an important factor, can sorb on natural oxide minerals and change its surface property, finally affecting ZnO NP transformation. This study investigated the interactions of ZnO NPs with phosphorus ligands (i.e., phytate and orthophosphate) pre-sorbed γ-alumina (γ-Al₂O₃) via batch experiments and multi-technique analyses. A limited amount of aqueous Zn²⁺ is observed when the concentration of ZnO NPs is relatively low (<64.8 mg L^-1) in the presence of phytate pre-sorbed γ-Al₂O₃. Solid Zn(II) species includes binary/ternary surface Zn(II) complexes on γ-Al₂O₃ with minor amounts of zinc phytate precipitates. As the concentration of ZnO NPs increases, surface Zn(II) complexes gradually transform into zinc phytate and Zn-Al layered double hydroxide (Zn-Al LDH) precipitates. The quantitative analysis indicates that, as the concentration of ZnO NPs increases from 32.4 to 388.8 mg L^-1, the proportion of Zn(II) species as binary/ternary surface complexes decreases from 81.9 to 30.2%; and the proportion as zinc phytate and Zn-Al LDH increases from 17.9 to 27.6% and 0 to 43.8%, respectively. The pre-sorption of orthophosphate can also inhibit ZnO NP transformation into Zn-Al LDH precipitates on γ-Al₂O₃. This study suggests that natural ligands pre-existed on natural oxide minerals could greatly influence the solubility, stability, transformation, and fate of easily dissoluble metal oxides (e.g., ZnO) in the environments.

Nanotechnology: the Alternative and Efficient Solution to Biofouling in the Aquaculture Industry

Biofouling is a global issue in aquaculture industries. It adversely affects marine infrastructure (ship's hulls, mariculture cages and nets, underwater pipes and filters, building materials, probes, and sensor devices). The estimated cost of managing marine biofouling accounts for 5-10% of production cost. Non-toxic foul-release coating and biocide-based coating are the two current approaches. Recent innovation and development of a surface coating with nanoparticles such as photocatalytic zinc oxide nanocoating on fishing nets, copper oxide nanocoating on the water-cooling system, and silver nanoparticle coating to inhibit microalgal adhesion on submerged surfaces under natural light (photoperiod) could present meaningful anti-biofouling application. Nanocoating of zinc, copper, and silver oxide is an environmentally friendly surface coating strategy that avoid surface adhesion of bacteria, diatoms, algal, protozoans, and fungal species. Such nanocoating could also provide a solution to strains tolerant to Cu, Zn, and Ag. This draft of the special issue demonstrates the anti-biofouling potential of various metal and metal oxide nanoparticle coating to combat aquaculture industry biofouling problems.

In Situ Tracking of Crystal-Surface-Dependent Cu2O Nanoparticle Dissolution in an Aqueous Environment

Metal-oxide-based nanoparticles (MONPs) such as Cu₂O NPs have attracted growing attention, but the potential discharges of MONPs have raised considerable concern of their environmental fate including their dissolution behavior. The impacts of morphology on MONP dissolution are largely uncertain due to the lack of in situ tracking techniques. In this study, we combined a series of in situ technologies including liquid-cell transmission electron microscopy and fluorescence probes to reveal the in situ dissolution process of Cu₂O NPs in freshwater. Our results suggest that cubic Cu₂O NPs exhibit a higher dissolution quantity compared with spherical NPs of the same surface area. The difference was mainly related to the crystal surface, while other factors such as particle size or aggregation status showed minor effects. Importantly, we demonstrated the simultaneous growth of new small NPs and the dissolution of pristine Cu₂O NPs during the dissolution of Cu₂O NPs. Cubic Cu₂O NPs became much less soluble under O₂-limited conditions, suggesting that O₂ concentration largely affected the dependence of dissolution on the NP morphology. Our findings highlight the potential application of in situ techniques to track the environmental fates of MONPs, which would provide important information for assessing the ecological risks of engineered NPs.

Dissolution Behaviour of Metal-Oxide Nanomaterials in Various Biological Media

Toxicological effects of metal-oxide-engineered nanomaterials (ENMs) are closely related to their distinct physical-chemical properties, especially solubility and surface reactivity. The present study used five metal-oxide ENMs (ZnO, MnO₂, CeO₂, Al₂O₃, and Fe₂O₃) to investigate how various biologically relevant media influenced dissolution behaviour. In both water and cell culture medium (DMEM), the metal-oxide ENMs were more soluble than their bulk analogues, with the exception that bulk-MnO₂ was slightly more soluble in water than nano-MnO₂ and Fe₂O₃ displayed negligible solubility across all tested media (regardless of particle size). Lowering the initial concentration (10 mg/L vs. 100 mg/L) significantly increased the relative solubility (% of total concentration) of nano-ZnO and nano-MnO₂ in both water and DMEM. Nano-Al₂O₃ and nano-CeO₂ were impacted differently by the two media (significantly higher % solubility at 10 mg/L in DMEM vs. water). Further evaluation of simulated interstitial lung fluid (Gamble's solution) and phagolysosomal simulant fluid (PSF) showed that the selection of aqueous media significantly affected agglomeration and dissolution behaviour. The solubility of all investigated ENMs was significantly higher in DMEM (pH = 7.4) compared to Gamble's (pH 7.4), attributable to the presence of amino acids and proteins in DMEM. All ENMs showed low solubility in Gamble's (pH = 7.4) compared with PSF (pH = 4.5), attributable to the difference in pH. These observations are relevant to nanotoxicology as increased nanomaterial solubility also affects toxicity. The results demonstrated that, for the purpose of grouping and read-across efforts, the dissolution behaviour of metal-oxide ENMs should be evaluated using aqueous media representative of the exposure pathway being considered.

Lemna trisulca L.: a novel phytoremediator for the removal of zinc oxide nanoparticles (ZnO NP) from aqueous media

Several aquatic plant species have been proposed for phytoremediation of waters polluted with heavy metals and pesticides According to the limited information available, aquatic macrophytes also have a promising potential to remove NPs from aqueous media. Although there is considerable information on the remediation potential of Lemna spp., the capacity of Lemna trisulca seems to be neglected, particularly for nanoparticle removal. Therefore, in the current study, we aimed to investigate the removal efficiency of L. trisulca exposed to 3 different ZnO NP concentrations (2.5, 5, and 10 ppm) for 1, 4, and 7 days in Hoagland solutions and the removal percentage were measured on each duration and compared among groups. The accumulated zinc levels were measured in whole plant material and bioconcentration factors were calculated for each group. In addition, the effect of ZnO NPs on the photosynthetic activity of the plant was evaluated via analyzing the photosynthetic pigment (chlorophyll a and b) concentration. The removal percentage ranged between 9.3 and 72.9% and showed a gradual increase in all experimental groups based both on dose and test duration. The statistical comparisons of the removal percentage among the groups with or without the plant indicate that L. trisulca had a significant effect on removal rates particularly between 1st and 4th days of exposure, however, did not show any progress at 7th days. The only significant difference for chl-a and chl-b levels was observed in 10 ppm ZnO NP-exposed plants at 7th days.

Integrating machine learning interpretation methods for investigating nanoparticle uptake during seed priming and its biological effects

Seed priming by nanoparticles is an environmentally-friendly solution for alleviating malnutrition, promoting crop growth, and mitigating environmental stress. However, there is a knowledge gap regarding the nanoparticle uptake and the underlying physiological mechanism. Machine learning has great potential for understanding the biological effects of nanoparticles. However, its interpretability is a challenge for building trust and providing insights into the learned relationships. Herein, we systematically investigated how the factors influence nanoparticle uptake during seed priming by ZnO nanoparticles and its effects on seed germination. The properties of the nanoparticles, priming solution, and seeds were considered. Post hoc interpretation and model-based interpretation of machine learning were integrated into two ways to understand the mechanism of nanoparticle uptake during seed priming and its biological effects on seed germination. The results indicated that nanoparticle concentration and ionic strength influenced the shoot fresh weight mainly by controlling the nanoparticle uptake. The nanoparticle uptake had a significant slowdown when the nanoparticle concentration exceeded 50 mg L^-1. Although other factors, such as zeta potential and hydrodynamic diameter, had no obvious effects on nanoparticle uptake, their biological effects cannot be ignored. This approach can promote the safer-by-design strategy of nanomaterials for sustainable agriculture.

Cerium Oxide Enhances the Toxicity of Zinc Oxide Nanoparticles in Human Lung Epithelial Cell Cultures

Recently, many approaches have been developed to improve the performance of nanomaterials. Combining more than one nanomaterial is one such approach that achieves superior results. However, during the fabrication of nanomaterials or formulation of end products, materials can be released into the ambient air and be inhaled by workers. The adverse health outcomes of inhaling such compounds are unknown. In this study, we examined such effects in combining two of the most utilized nanomaterials in several industrial sectors: zinc oxide (ZnO) and cerium oxide (CeO₂). These materials can be found together in sunscreens, polyvinyl alcohol (PVA) films, and construction products. The aim of this study was to assess the adverse biological outcomes of CeO₂-ZnO nano-mixtures in human lung epithelial cells. A549 human lung epithelial cells were treated with increasing concentrations of ZnO or CeO₂ NPs alone, or as a mixture of both, under submerged conditions for 24 h. After treatment, cell viability, reactive oxygen species (ROS) formation, cell membrane integrity, and cytokine production were examined. ZnO NPs showed a dose-dependent trend for all endpoints. CeO₂ NPs did not exhibit any toxic effect in any individual concentrations. When higher doses of ZnO were combined with increasing doses of CeO₂, loss of cell viability and an elevation in cell membrane leakage were observed. Interleukin 8 (IL-8) and ROS generation were higher when ZnO NPs were combined with CeO₂ NPs, compared to cells that were treated with ZnO alone. The release of monocyte chemoattractant protein-1 (MCP-1) was reduced in the cells that were treated with higher doses of ZnO and CeO₂. Thus, the presence of CeO₂ enhanced the toxicity of ZnO in A549 cells at non-toxic levels of CeO₂. This suggests an additive toxicity of these two nanomaterials.

Effects of zinc oxide nanoparticles transformation in sulfur-containing water on its toxicity to microalgae: Physicochemical analysis, photosynthetic efficiency and potential mechanisms

The environmental transformation of nanomaterials will have a significant impact on their ecotoxicity. Sulfidation process is one of the most important transformation processes in the aquatic environment. Although the sulfidation of ZnO nanoparticles (ZnO NPs) has been previously reported, the transformation characteristics and the relationship between the transformation process and toxicity mechanism to aquatic organisms, especially microalgae, require further study. Therefore, we systematically investigated the transformation properties of ZnO NPs in sulfur-containing water and its impact on the toxicity to microalgae. The results showed that the transformation products of ZnO NPs mainly contained ZnS nanoparticles, and their contents increased with the increase of sulfur-zinc molar ratio in the aqueous solution. After the first week of treatment, the sulfidized ZnO NPs showed less toxicity to microalgae than the pristine ZnO NPs, and interestingly, they exhibited higher toxicity over time. The zinc ions and transformation products played a major role in different treatment periods, resulting in different toxicity. The results of photosynthetic pigments, photosynthetic efficiency, and the relative electron transport rates indicated that the sulfidation process of ZnO NPs had a remarkable influence on algal photosynthesis. These newly acquired results will help us explore the transformation characteristics of ZnO NPs and reasonably assess their potential risks in the aquatic environment.

The effect of 100-200 nm ZnO and TiO2 nanoparticles on the in vitro-grown soybean plants

Engineered nanomaterials are increasingly used in everyday life applications and, in consequence, significant amounts are being released into the environment. From soil, water, and air they can reach the organelles of edible plants, potentially impacting the food chain and human health. The potential environmental and health impact of these nanoscale materials is of public concern. TiO2 and ZnO are among the most significant nanomaterials in terms of production amounts. Our study aimed at evaluating the effects of large-scale TiO2 (~100 nm) and ZnO (~200 nm) nanoparticles on soybean plants grown in vitro. The effect of different concentrations of nanoparticles (10, 100, 1000 mg/L) was evaluated regarding plant morphology and metabolic changes. ZnO nanoparticles showed higher toxicity compared to TiO2 in the experimental set-up. Overall, elevated levels of chlorophylls and proteins were observed, as well as increased concentrations of ascorbic and dehydroascorbic acids. Also, the decreasing stomatal conductance to water vapor and net CO2 assimilation rate show higher plant stress levels. In addition, ZnO nanoparticle treatments severely affected plant growth, while TEM analysis revealed ultrastructural changes in chloroplasts and rupture of leaf cell walls. By combining ICP-OES and TEM results, we were able to show that the nanoparticles were metabolized, and their internalization in the soybean plant tissues occurred in ionic forms. This behavior most likely is the main driving force of nanoparticle toxicity.

Insights into the mapping of green synthesis conditions for ZnO nanoparticles and their toxicokinetics

Research on ZnO nanoparticles (NPs) has broad medical applications. However, the green synthesis of ZnO NPs involves a wide range of properties requiring optimization. ZnO NPs show toxicity at lower doses. This toxicity is a function of NP properties and pharmacokinetics. Moreover, NP toxicity and pharmacokinetics are affected by the species type and age of the animals tested. Physiologically based pharmacokinetic (PBPK) modeling offers a mechanistic platform to scrutinize the colligative effect of the interplay between these factors, which reduces the need for in vivo studies. This review provides a guide to choosing green synthesis conditions that result in minimal toxicity using a mechanistic tool, namely PBPK modeling.

Improved biocompatibility of Zn-Ag-based stent materials by microstructure refinement

The metallurgical engineering of bioresorbable zinc (Zn)-based medical alloys would greatly benefit from clarification of the relationships between material properties and biological responses. Here we investigate the biocompatibility of three Zn-based silver (Ag)-containing alloys, ranging from binary to quinary alloy systems. Selected binary and quinary Zn-Ag-based alloys underwent solution treatment (ST) to increase the solubility of Ag-rich phases within the Zn bulk matrix, yielding two different microstructures (one without ST and a different one with ST) with the same elemental composition. This experimental design was intended to clarify the relationship between elemental profile/microstructure and biocompatibility for the Zn-Ag system. We found that the quinary alloy system (Zn-4Ag-0.8Cu-0.6Mn-0.15Zr) performed significantly better, in terms of histomorphometry, than any alloy system we have evaluated to date. Furthermore, when solution treated to increase strength and ductility and reduce the fraction of Ag-rich phases, the quinary alloy's biocompatibility further improved. In vitro corrosion testing and metallographic analysis of in vivo implants demonstrated a more uniform mode of corrosion for the solution treated alloy. We conclude that Zn-Ag alloys can be engineered through alloying to substantially reduce neointimal growth. The positive effect on neointimal growth can be further enhanced by dissolving the AgZn₃ precipitates in the Zn matrix to improve the corrosion uniformity. These findings demonstrate that neointimal-forming cells can be regulated by elemental additions and microstructural changes in degradable Zn-based implant materials. STATEMENT OF SIGNIFICANCE: The metallurgical engineering of bioresorbable zinc (Zn)-based medical alloys would greatly benefit from clarification of the relationships between material properties and biological responses. Here, selected binary and quinary Zn-Ag-based alloys underwent solution treatment (ST) to increase the solubility of Ag-rich phases within the Zn bulk matrix, yielding two different microstructures (one without ST and a different one with ST) with the same elemental composition. We found that applying a thermal treatment restores mechanical strength and mitigates the strain rate sensitivity of Zn-Ag alloys by dissolving AgZn₃ precipitates. Ag-rich nano-precipitates in Zn decrease biocompatibility, a phenomenon that can be counteracted by dissolving the AgZn₃ precipitates in the bulk Zn matrix.

Food Additive Zinc Oxide Nanoparticles: Dissolution, Interaction, Fate, Cytotoxicity, and Oral Toxicity

Food additive zinc oxide (ZnO) nanoparticles (NPs) are widely used as a Zn supplement in the food and agriculture industries. However, ZnO NPs are directly added to complex food-matrices and orally taken through the gastrointestinal (GI) tract where diverse matrices are present. Hence, the dissolution properties, interactions with bio- or food-matrices, and the ionic/particle fates of ZnO NPs in foods and under physiological conditions can be critical factors to understand and predict the biological responses and oral toxicity of ZnO NPs. In this review, the solubility of ZnO NPs associated with their fate in foods and the GI fluids, the qualitative and quantitative determination on the interactions between ZnO NPs and bio- or food-matrices, the approaches for the fate determination of ZnO NPs, and the interaction effects on the cytotoxicity and oral toxicity of ZnO NPs are discussed. This information will be useful for a wide range of ZnO applications in the food industry at safe levels.

Natural Rubber (NR) Latex Films with Antimicrobial Properties for Stethoscope Diaphragm Covers

Systematic disinfection of the stethoscope diaphragm is required to ensure that it does not act as a vector for cross-transmission of health-related diseases. Thus, an antimicrobial latex film could be used as a cover to inhibit pathogenic bacteria from growing on its surface. The aim of this work is to determine the antimicrobial activity and mechanical properties of antimicrobial natural rubber (NR) latex films with different types of antimicrobial agents (mangosteen peel powder (MPP), zinc oxide nanoparticles (ZnO NP), and povidone-iodine (PVP-I)). The antimicrobial loading was varied from 0.5, to 1.0, and 2.0 phr to monitor the effective inhibition of Gram-negative bacteria and fungi growth. For MPP and PVP-I antimicrobial agents, a loading of 2.0 phr showed good antimicrobial efficacy with the largest zone of inhibition. Simultaneously, ZnO NP demonstrated excellent antimicrobial activity at low concentrations. The addition of antimicrobial agents shows a comparable effect on the mechanical properties of NR latex films. In comparison to control NR latex film (29.41 MPa, 48.49 N/mm), antimicrobial-filled films have significantly greater tensile and tear strengths (MPP (33.84 MPa, 65.21 N/mm), ZnO NP (31.79 MPa, 52.77 N/mm), and PVP-I (33.25 MPa, 50.75 N/mm). In conclusion, the addition of antimicrobial agents, particularly ZnO NP, can be a better choice for NR latex films because they will serve as both an activator and an antimicrobial. In a clinical context, with regard to frequently used medical equipment such as a stethoscope, such an approach offers significant promise to aid infection control.

Halloysite-Zinc Oxide Nanocomposites as Potential Photocatalysts

The synthesis and structural characterization of synthetic zinc oxide and halloysite-based zinc oxide nanocomposites (with 2–28 m/m% ZnO content) are presented. The chemical precipitation of zinc hydroxide precursors and its subsequent drying at 80 °C yielded dominantly zinc oxide (zincite). Thermal treatment at 350 °C completely transformed the remaining precursor to ZnO without causing structural dehydroxylation of the halloysite support. The procedure yielded zinc oxide nanoparticles with 10–22 nm average size having quasi-spherical scale-like morphology. The specific surface area of the synthetic zinc oxide was found to be low (13 m2/g), which was significantly enhanced after nanocomposite preparation (27–47 m2/g). The photocatalytic activity of the prepared nanocomposites was probed by the degradation of a phenolic compound (4-nitrophenol) upon UV irradiation in liquid phase. Compared to their individual constituents, an increased activity of the nanocomposites was observed, while the SSA-normalized photocatalytic activity revealed a synergic effect in nanocomposites above 9 m/m% ZnO content. The nanocomposites were found to be stable at pH = 5.6, with a minor and major mobilization of zinc ions at pH = 12.4 and pH = 1.9, respectively. The toxicity of leachates in different pH environments by Vibrio fischeri bioluminescence indicated low toxicity for ZnO nanoparticles and insignificant toxicity for the nanocomposites. The enhanced photocatalytic activity together with the lower toxicity of the halloysite-ZnO nanocomposites highlight their application potential in water treatment.

Comparative study of the transcriptomes of Caco-2 cells cultured under dynamic vs. static conditions following exposure to titanium dioxide and zinc oxide nanomaterials

Due to the widespread application of food-relevant inorganic nanomaterials, the gastrointestinal tract is potentially exposed to these materials. Gut-on-chip in vitro systems are proposed for the investigation of compound toxicity as they better recapitulate the in vivo human intestinal environment than static models, due to the added shear stresses associated with the flow of the medium. We aimed to compare cellular responses of intestinal epithelial Caco-2 cells at the gene expression level upon TiO₂ (E171) and ZnO (NM110) nanomaterial exposure when cultured under dynamic and conventionally applied static conditions. Whole-genome transcriptome analyses upon exposure of the cells to TiO₂ and ZnO nanomaterials revealed differentially expressed genes and related biological processes that were culture condition specific. The total number of differentially expressed genes (p < 0.01) and affected pathways (p < 0.05 and FDR < 0.25) after nanomaterial exposure was higher under dynamic culture conditions than under static conditions for both nanomaterials. The observed increase in nanomaterial-induced responses in the gut-on-chip model indicates that shear stress might be a major factor in cell susceptibility. This is the first report on the application of a gut-on-chip system in which gene expression responses upon TiO₂ and ZnO nanomaterial exposure are evaluated and compared to a static system. It extends current knowledge on nanomaterial toxicity assessment and the influence of a dynamic environment on cellular responses. Application of the gut-on-chip system resulted in higher sensitivity of the cells and might thus be an attractive system for use in the toxicological hazard characterization of nanomaterials.

ZnO Transducers for Photoluminescence-Based Biosensors: A Review

Zinc oxide (ZnO) is a wide bandgap semiconductor material that has been widely explored for countless applications, including in biosensing. Among its interesting properties, its remarkable photoluminescence (PL), which typically exhibits an intense signal at room temperature (RT), arises as an extremely appealing alternative transduction approach due to the high sensitivity of its surface properties, providing high sensitivity and selectivity to the sensors relying on luminescence output. Therefore, even though not widely explored, in recent years some studies have been devoted to the use of the PL features of ZnO as an optical transducer for detection and quantification of specific analytes. Hence, in the present paper, we revised the works that have been published in the last few years concerning the use of ZnO nanostructures as the transducer element in different types of PL-based biosensors, namely enzymatic and immunosensors, towards the detection of analytes relevant for health and environment, like antibiotics, glucose, bacteria, virus or even tumor biomarkers. A comprehensive discussion on the possible physical mechanisms that rule the optical sensing response is also provided, as well as a warning regarding the effect that the buffer solution may play on the sensing experiments, as it was seen that the use of phosphate-containing solutions significantly affects the stability of the ZnO nanostructures, which may conduct to misleading interpretations of the sensing results and unreliable conclusions.

Cadmium removal by FeOOH nanoparticles accommodated in biochar: Effect of the negatively charged functional groups in host

Metallic oxide nanoparticles (NPs) anchored in biochar provide a promising measure forward into the scaled-up application of these NPs in water treatment, and reducing the size of the dwelled NPs is expected to boost the adsorption performance of biochar-based composites because of the size and surface effect. Nevertheless, it is still of great challenge to regulate the size of the impregnated NPs due to their intrinsic self-agglomeration caused by high surface energy. In this study, we fabricated the charged biochar (C-BC) bearing high-density negatively charged groups (i.e., carboxyl and hydroxyl groups) via HNO₃ oxidization to load the model metal oxide FeOOH NPs. The average sizes of anchored FeOOH NPs were ultrasmall, ranging from 19.9 ± 1.5 to 3.1 ± 0.5 nm, and decreased with the increased amount of carboxyl and hydroxyl groups in C-BC. Whether in batch adsorption or fixed-bed column setting, adsorption of Cd(II) onto the as-made composites was greatly enhanced by carboxyl and hydroxyl groups in carrier. The normalized adsorption capacities of Cd(II) by ferric mass of the loaded FeOOH were 499.9-724.9 mg/g-Fe, approximately 18.6-27.1 and 2.51-3.64 folds over the bulky FeOOH and FeOOH-impregnated biochar. Our study results should provide a significant reference on how to acquire highly efficient biochar-based composites for water decontamination.

Toxicokinetics of zinc oxide nanoparticles and food grade bulk-sized zinc oxide in rats after oral dosages

The increasing application of zinc oxide nanoparticles (ZnO NPs) in consumer products has raised concerns about the potential health risks in human. It is crucial to understand the toxicokinetic information of ZnO NPs, especially the differences between NPs and non-nano form material. This study investigated the toxicokinetic profile of ZnO NPs and food grade bulk-sized ZnO in rats after single or repeated oral dosages. For single oral administration of ZnO suspensions at 350 mg/kgbw, the Zn content in blood and tissues showed no elevation, the majority of ZnO particles were eliminated via feces within 48 h. For repeated oral exposure to ZnO suspensions at 350 mg/kgbw or ZnSO₄ solution at 700 mg/kgbw for 90 days, elevated Zn levels were observed in liver, kidney, and bone in all three treatment groups, the Zn level recovered to normal level in liver and kidney, but not in bone, after a recovery period. ZnO NPs and bulk-sized ZnO showed similarity in toxicokinetics in rats, regardless of exposure duration or gender. ZnO particles shared a similar biodistribution profile with ZnSO₄, and were likely to be absorbed mostly in ionic forms.

Ecotoxicological screening of UV-filters using a battery of marine bioassays

The present study aimed to assess the toxicity of seven UV-filters: zinc oxide nanoparticles (nZnO, particle size <100 nm), titanium dioxide nanoparticles (nTiO₂, primary particle size 21 nm), 2-ethylhexyl-4-methoxycinnamate (EHMC), 4-methylbenzylidene camphor (4-MBC), avobenzone (AVO), octocrylene (OCTO) and benzophenone-3 (BP-3) on three species: Aliivibrio fischeri (inhibition of bioluminescence), Phaeodactylum tricornutum (growth inhibition) and Ficopomatus enigmaticus (larval development success). Results showed nTiO₂ to be the most toxic for P. tricornutum (EC₅₀ 0.043 mg L^-1), while no effect was observed in A. fischeri and F. enigmaticus. EHMC was the most toxic to A. fischeri (EC₅₀ 0.868 mg L^-1 (15 min) and 1.06 mg L^-1 (30 min)) and the second most toxic to P. tricornutum. For F. enigmaticus, the lowest percentages of correct development resulted from 4-MBC exposure, with EC₅₀ of 0.836 mg L^-1. Overall, AVO induced low toxicity to every assessed species and OCTO was the least toxic for F. enigmaticus larvae. Considering the results obtained for F. enigmaticus, further larval development assays were performed with nZnO and EHMC under different light (light vs darkness) and temperature (20 and 25 °C) conditions, showing higher percentages of correct development at 25 °C, independently on light/darkness conditions. Under different temperature and photoperiod conditions, nZnO was more toxic than EHMC. Overall, nZnO and EHMC were among the most toxic UV filters tested and, when testing the effects of these UV-filters with temperature the results highlight that the impacts are liable to be lessened at higher temperatures (25 °C compared with 20 °C), in the case of this estuarine polychaete species. Nevertheless, further experiments are necessary to describe the effects of these two UV-filters at different organization levels, to study the toxicity of eventual degradation by-products and to provide more information on the combination of different stressors.

Uptake and Translocation of Mesoporous SiO2-Coated ZnO Nanoparticles to Solanum lycopersicum Following Foliar Application

Nanoparticles composed of ZnO encapsulated in a mesoporous SiO₂ shell (nZnO@SiO₂) with a primary particle diameter of ∼70 nm were synthesized for delivery of Zn, a micronutrient, by foliar uptake. Compared to the rapid dissolution of bare nZnO (90% Zn dissolution after 4 h) in a model plant media (pH = 5), nZnO@SiO₂ released Zn more slowly (40% Zn dissolution after 3 weeks), thus enabling sustained Zn delivery over a longer period. nZnO@SiO₂, nZnO, and ZnCl₂ were exposed to Solanum lycopersicum by dosing 40 μg of Zn micronutrient (in a 20 μL suspension) on a single leaf. No Zn uptake was observed for the nZnO treatment after 2 days. Comparable amounts of Zn uptake were observed 2 days after ZnCl₂ (15.5 ± 2.4 μg Zn) and nZnO@SiO₂ (11.4 ± 2.2 μg Zn) dosing. Single particle inductively coupled plasma mass spectrometry revealed that for foliar applied nZnO@SiO₂, almost all of the Zn translocated to upper leaves and the stem were in nanoparticulate form. Our results suggest that the SiO₂ shell enhances the uptake of ZnO nanoparticles in Solanum lycopersicum. Sustained and controlled micronutrient delivery in plants through foliar application will reduce fertilizer, energy, and water use.

Extraction of Chlorobenzenes and PCBs from Water by ZnO Nanoparticles

Metal oxide nanoparticles have great potential for selective adsorption and catalytic degradation of contaminants from aqueous solutions. In this study, we employ mass spectrometry and molecular dynamics simulations to better understand the chemical and physical mechanisms determining the affinity of chlorobenzenes and polychlorinated biphenyls (PCBs) for zinc oxide nanoparticles (ZnO NPs). The experiments and simulations both demonstrate that the adsorption coefficients for chlorobenzenes increase steadily with the number of chlorine atoms, while, for PCBs, the relation is more complex. The simulations link this complexity to chlorine atoms at ortho positions hindering coplanar conformations. For a given number of chlorine atoms, the simulations predict decreasing adsorption affinity with increasing numbers of ortho substitutions. Consequently, the simulations predict that some of the highest adsorption affinities for ZnO NPs are exhibited by dioxin-like PCBs, suggesting the possibility of selective sequestration of these most acutely toxic PCBs. Remarkably, the experiments show that the PCB adsorption coefficients of ZnO NPs with diameters ≤ 80 nm exceed those of a soil sample by 5–7 orders of magnitude, meaning that a single gram of ZnO NPs could sequester low levels of PCB contamination from as much as a ton of soil.

Nanoencapsulation of thyme essential oil: a new avenue to enhance its protective role against oxidative stress and cytotoxicity of zinc oxide nanoparticles in rats

Although the green synthesis of nanometals is eco-friendly, the toxicity or safety of these biosynthesized nanoparticles in living organisms is not fully studied. This study aimed to evaluate the potential protective role of encapsulated thyme oil (ETO) against zinc oxide nanoparticles (ZnO-NPs). ETO was prepared using a mixture of whey protein isolate, maltodextrin, and gum Arabic, and ZnO-NPs were synthesized using parsley extract. Six groups of male Sprague-Dawley rats were treated orally for 21 days which included the control group, ZnO-NP-treated group (25 mg/kg body weight (b.w.)), ETO-treated groups at low or high dose (50, 100 mg/kg b.w.), and the groups that received ZnO-NPs plus ETO at the two tested doses. Blood and tissue samples were collected for different assays. The results showed that carvacrol and thymol were the major components in ETO among 13 compounds isolated by GC-MS. ZnO-NPs were nearly spherical and ETOs were round in shape with an average size of 38 and 311.8 nm, respectively. Administration of ZnO-NPs induced oxidative stress, DNA damage, biochemical, ctyogentical, and histological changes in rats. ETO at the tested doses alleviated these disturbances and showed protective effects against the hazards of ZnO-NPs. It could be concluded that encapsulation of thyme oil using whey protein isolate, maltodextrin, and gum Arabic improved the antioxidant properties of ETO, probably possess synergistic effects, and can be used as a promising tool in pharmaceutical and food applications.

Long-term dissolution and transformation of ZnO in soils: The roles of soil pH and ZnO particle size

The ongoing use of ZnO nanoparticles (NPs)-associated commercial products results in large release of ZnO NPs into soils and has prompted systematic investigation regarding their fractionation and fate in soils. To date, little information is available about the long-term dissolution and transformation of ZnO NPs in different soils. The distribution and speciation of Zn in two different soils (i.e., Red soil (RS) and Wushantu soil (WS)) treated with either ZnO NPs or bulk ZnO were elucidated by combining soil incubation study with synchrotron-based techniques. Results revealed that ZnO NPs and bulk ZnO were almost dissolved after 1 day, indicating their rapid dissolution upon entering RS (pH-acidic). Rapid dissolution of ZnO NPs was also observed even in WS (pH- circumneutral). The solubilized Zn²⁺ released from ZnO particles was completely transformed into stable forms (e.g., Zn-Al LDH, Zn-OM, and Zn(OH)₂) and Zn-Al LDH was the dominant species in WS after incubation for 360 days. A majority of solubilized Zn²⁺ released from ZnO particles was also transformed into Zn-Al LDH precipitate in RS. The findings of this study facilitate a better understanding of the fate of ZnO in soils, which could be leveraged for remediation of ZnO-polluted soils.

Reactivity of Hydrogen-Related Electron Centers in Powders, Layers, and Electrodes Consisting of Anatase TiO2 Nanocrystal Aggregates

Anatase TiO₂ nanoparticle aggregates were used as model systems for studying at different water activities the reactivity of electron centers at semiconductor surfaces. The investigated surface conditions evolve from a solid/vacuum interface to a solid/bulk electrolyte interface. Hydrogen-related electron centers were generated either chemically-upon sample exposure to atomic hydrogen at the semiconductor/gas interface-or electrochemically-upon bias-induced charge accumulation at the semiconductor/electrolyte interface. Based on their corresponding spectroscopic and electrochemical fingerprints, we investigated the reactivity of hydrogen-related electron centers as a function of the interfacial condition and at different levels of complexity, that is, (i) for dehydrated and (partially) dehydroxylated oxide surfaces, (ii) for oxide surfaces covered by a thin film of interfacial water, and (iii) for oxide surfaces in contact with a 0.1 M HClO₄ aqueous solution. Visible (Vis) and infrared (IR) spectroscopy evidence a chemical equilibrium between hydrogen atoms in the gas phase and-following their dissociation-electron/proton centers in the oxide. The excess electrons are either localized forming (Vis-active) Ti³⁺ centers or delocalized as (IR-active) free conduction band electrons. The addition of molecular oxygen to chemically reduced anatase TiO₂ nanoparticle aggregates leads to a quantitative quenching of Ti³⁺ centers, while a fraction of ∼10% of hydrogen-derived conduction band electrons remains in the oxide pointing to a persistent hydrogen doping of the semiconductor. Neither trapped electrons (i.e., Ti³⁺ centers) nor conduction band electrons react with water or its adsorption products at the oxide surface. However, the presence of an interfacial water layer does not impede the electron transfer to molecular oxygen. At the semiconductor/electrolyte interface, inactivity of trapped electrons with regard to water reduction and electron transfer to oxygen were evidenced by cyclic voltammetry.

Dissolution of copper oxide nanoparticles is controlled by soil solution pH, dissolved organic matter, and particle specific surface area

Dissolution is the primary process affecting the bioavailability and toxicity of nanoscale copper oxide (nano-CuO) to plants and soil organisms. In this study, particle morphology, organic acid, and soil properties were considered to understand the dissolution characteristics of nano-CuO in soil solutions. The results showed that the copper ions (Cu²⁺) released from spherical nano-CuO (CuO NPs), tubular nano-CuO (CuO NTs), and spherical microsized CuO (CuO MPs) in the ten soil solutions were 26.6-4194.0 μg/L, 4.90-217.1 μg/L, and 10.8-326.0 μg/L, respectively. The concentration of Cu²⁺ was negatively correlated with the pH of the soil solution and positively correlated with the contents of dissolved organic carbon (DOC), aluminum, and manganese. Multivariate stepwise regression analysis indicated that the dissolution of CuO NPs could be well predicted by pH and DOC contents of the soil solutions. In the GD soil solution (acidic), 4- and 8-fold of the DOC content amendments significantly promoted the dissolution of the three sizes of CuOs, resulting in an increase of Cu²⁺ 4.55-11.3 and 5.67-16.2 times, respectively. In the CQ soil solution (neutral), 8-fold DOC amendments increase the release of Cu²⁺ 2.13-16.6 times. While in the SD soil solution (alkaline), promoting effect on the dissolution was only observed for nano-CuOs, with Cu²⁺ elevated by factors of 1.56-4.64 and 1.38-4.48. The amendments of Al³⁺ and Mn²⁺ in soil solution increased the amounts of Cu²⁺ 1.13-4.80 and 1.02-1.46 times in the GD soil solution. In comparison, no significant promoting effects were observed in CQ and SD soil solutions due to their stronger buffering capacities. These findings offer insight into the dissolution behavior of nano-CuOs in soils and be helpful to evaluate their environmental risks.

Growth Inhibition of Gram-Positive and Gram-Negative Bacteria by Zinc Oxide Hedgehog Particles

PURPOSE

Nanomaterials for antimicrobial applications have gained interest in recent years due to the increasing bacteria resistance to conventional antibiotics. Wound sterilization, water treatment and surface decontamination all avail from multifunctional materials that also possess excellent antibacterial properties, eg zinc oxide (ZnO). Here, we assess and compare the effects of synthesized hedgehog-like ZnO structures and commercial ZnO particles with and without mixing on the inactivation of bacteria on surfaces and in liquid environments.

METHODS

Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria in microbial culture medium were added to reverse spin bioreactors that contained different concentrations of each ZnO type to enable dynamic mixing of the bacteria-ZnO suspensions. Optical density of the bacteria-ZnO suspensions was measured in real-time and the number of viable bacteria after 24 h exposure was determined using standard microbiological techniques. The concentration of zinc ion generated from ZnO dissolution in different liquid types was estimated from the dynamic interaction exposure. Static antibacterial tests without agitation in liquid media and on agar surface were performed for comparison.

RESULTS

A correlation between increasing ZnO particle concentration and reduction in viable bacteria was not monotonous. The lowest concentration tested (10 µg/mL) even stimulated bacteria growth. The hedgehog ZnO was significantly more antibacterial than commercial ZnO particles at higher concentrations (up to 1000 µg/mL tested), more against E. coli than S. aureus. Minimum inhibitory concentration in microwell plates was correlated with those results. No inhibition was detected for any ZnO type deposited on agar surface. Zinc ion release was greatly suppressed in cultivation media. Scanning electron microscopy images revealed that ZnO needles can pierce membrane of bacteria whereas the commercial ZnO nanoparticles rather agglomerate on the cell surface.

CONCLUSION

The inhibition effects are thus mainly controlled by the interaction dynamics between bacteria and ZnO, where mixing greatly enhances antibacterial efficacy of all ZnO particles. The efficacy is modulated also by ZnO particle shapes, where hedgehog ZnO has superior effect, in particular at lower concentrations. However, at too low concentrations, ZnO can stimulate bacteria growth and must be thus used with caution.

Zinc Oxide Nanoparticles Protected with Terpenoids as a Substance in Redox Imbalance Normalization in Burns

Preliminary protection of zinc oxide nanoparticles (ZnO NPs) with terpenoids such as betulin, its derivatives, and essential oils components has been proposed to produce gel-like oleophilic and hydrophilic formulations. We studied the properties of gel-like dispersions of ZnO NPs with immobilized terpenoids and their effects on the activity of LDH, GR, G6PDH, restoration of redox balance of co-enzyme pairs NAD+/NADH and NADP+/NADPH, as well as the activity of SOD, catalase, AlDH in erythrocytes in the treatment of burns in rats. Hysteresis loops on the rheograms of studied dispersions characterize their thixotropic properties. ZnO NPs with betulin diphosphate in the water-ethanol medium lead to a 20-fold increase in the hydrodynamic radius at pH 7.3 compared to the initial ZnO NPs, and facilitate the formation of Zn2+ ions and their penetration into the viable epidermis, unlike oleophilic dispersions. All dispersions reduce the healing time by one and a half times compared with the untreated control group, increase the activity of LDH, GR, G6PDH, SOD, catalase, AlDH, and contribute to the normalization of coenzyme balance. Normalization of the redox balance and wound state was more effective using hydrophilic dispersions due to Zn2 + penetration.

Synergism of Zinc Oxide Quantum Dots with Antifungal Drugs: Potential Approach for Combination Therapy against Drug Resistant Candida albicans

Candidiasis caused by Candida albicans is one of the most common microbial infections. Azoles, polyenes, allylamines, and echinocandins are classes of antifungals used for treating Candida infections. Standard drug doses often become ineffective due to the emergence of multidrug resistance (MDR). This leads to the use of higher drug doses for prolonged duration, resulting in severe toxicity (nephrotoxicity and liver damage) in humans. However, combination therapy using very low concentrations of two or more antifungal agents together, can lower such toxicity and limit evolution of drug resistance. Herein, 4–6 nm zinc oxide quantum dots (ZnO QDs) were synthesized and their in vitro antifungal activities were assessed against drug-susceptible (G1, F1, and GU4) and resistant (G5, F5, and GU5) isolates of C. albicans. In broth microdilution assay, ZnO QDs exhibited dose dependent growth inhibition between 0 – 200 µg/ml and almost 90% growth was inhibited in all Candida strains at 200 µg/ml of ZnO QDs. Synergy between ZnO QDs and antifungal drugs at sub-inhibitory concentrations of each was assessed by checkerboard analysis and expressed in terms of the fractional inhibitory concentration (FIC) index. ZnO QDs were used with two different classes of antifungals (azoles and polyenes) against Candida isolates: combination 1 (with fluconazole); combination 2 (with ketoconazole); combination 3 (with amphotericin B), and combination 4 (with nystatin). Results demonstrated that the potency of combinations of ZnO QDs with antifungal drugs even at very low concentrations of each was higher than their individual activities against the fungal isolates. The FIC index was found to be less than 0.5 for all combinations in the checkerboard assay, which confirmed synergism between sub-inhibitory concentrations of ZnO QDs (25 µg/ml) and individual antifungal drugs. Synergism was further confirmed by spot assay where cell viabilities of Candida strains were significantly reduced in all combinations, which was clearly evident from the disappearance of fungal cells on agar plates containing antifungal combinations. For safer clinical use, the in vitro cytotoxic activity of ZnO QDs was assessed against HeLa cell line and it was found that ZnO QDs were non-toxic at 25 µg/ml. Results suggested that the combination of ZnO QDs with drugs potentiate antimicrobial activity through multitargeted action. ZnO QDs could therefore offer a versatile alternative in combination therapy against MDR fungal pathogens, wherein lowering drug concentrations could reduce toxicity and their multitargeted action could limit evolution of fungal drug resistance.

Chemical transformations of nanoscale zinc oxide in simulated sweat and its impact on the antibacterial efficacy

Nanoscale zinc oxide (n-ZnO) is widely used in personal care products and textiles, thus, it would likely be released into human sweat. To better evaluate the potential human health risks of n-ZnO, it is essential to understand its chemical transformations in physiological solutions, such as human sweat, and the resulting changes in the n-ZnO bioavailability. Here, two types of n-ZnO, ZnO nanoparticles (ZnO-NPs) and nanorod-based ZnO nanospheres (ZnO-NSs) were synthesized and incubated in 3 types of simulated sweat with different pH values and phosphate concentrations. The content of Zn₃(PO₄)₂ in the transformed n-ZnO was quantified by selective dissolution of Zn₃(PO₄)₂ in 0.35 M ammonia solution where 100% and 5.5% of Zn₃(PO₄)₂ and ZnO were dissolved, respectively. The kinetics analysis indicated that by 24-48 h the content of Zn₃(PO₄)₂ reached the maximum, being 15-21% at pH 8.0 and 45-70% at pH 5.5 or 4.3. Interestingly, no correlation was observed between the rate constants of Zn₃(PO₄)₂ formation and the specific surface areas of n-ZnO, implying that chemical transformations from n-ZnO to Zn₃(PO₄)₂ in the simulated sweat might not be simply attributed to dissolution and precipitation. Using a variety of characterization techniques, we demonstrated the formation of a ZnO‒Zn₃(PO₄)₂ core-shell structure with the shell consisting of amorphous Zn₃(PO₄)₂ at pH 8.0 and additionally of crystalline Zn₃(PO₄)₂ and Zn₃(PO₄)₂•4H₂O at pH 5.5 or 4.3. The phosphate-induced transformation of n-ZnO in the simulated sweat at pH 5.5 and 4.3 greatly reduced the antibacterial efficacy of n-ZnO through moderating the nanoparticle dissolution, indicating limited bioavailability of the NPs upon transformation. The results improve the understanding of the fate and hazards of n-ZnO.

The studies on wet chemical etching via in situ liquid cell TEM

Wet chemical etching is a widely used process to fabricate fascinating nanomaterials, such as nanoparticles with precisely controlled size and shape. Understanding the etching mechanism and kinetic evolution process is crucial for controlling wet chemical etching. The development of in situ liquid cell transmission electron microscopy (LCTEM) enables the study on wet chemical etching with high temporal and spatial resolutions. However, there still lack a detailed literature review on the wet chemical etching studies by in situ LCTEM. In this review, we summarize the studies on wet etching nanoparticles, one-dimensional nanomaterials and nanoribbons by in situ LCTEM, including etching rate, anisotropic etching, morphology evolution process, and etching mechanism. The challenges and opportunities of in situ LCTEM are also discussed.

Wound Healing Composite Materials of Bacterial Cellulose and Zinc Oxide Nanoparticles with Immobilized Betulin Diphosphate

A design of new nanocomposites of bacterial cellulose (BC) and betulin diphosphate (BDP) pre-impregnated into the surface of zinc oxide nanoparticles (ZnO NPs) for the production of wound dressings is proposed. The sizes of crystalline BC and ZnO NPs (5-25%) corresponded to 5-6 nm and 10-18 nm, respectively (powder X-ray diffractometry (PXRD), Fourier-infrared (FTIR), ultraviolet (UV), atomic absorption (AAS) and photoluminescence (PL) spectroscopies). The biological activity of the wound dressings "BC-ZnO NPs-BDP" was investigated in rats using a burn wound model. Morpho-histological studies have shown that more intensive healing was observed during treatment with hydrophilic nanocomposites than the oleophilic standard (ZnO NPs-BDP oleogel; p < 0.001). Treatment by both hydrophilic and lipophilic agents led to increases in antioxidant enzyme activity (superoxide dismutase (SOD), catalase) in erythrocytes and decreases in the malondialdehyde (MDA) concentration by 7, 10 and 21 days (p < 0.001). The microcirculation index was restored on the 3rd day after burn under treatment with BC-ZnO NPs-BDP wound dressings. The results of effective wound healing with BC-ZnO NPs-BDP nanocomposites can be explained by the synergistic effect of all nanocomposite components, which regulate oxygenation and microcirculation, reducing hypoxia and oxidative stress in a burn wound.