Structure of Polyelectrolyte Block Copolymer Micelles

Modern Trends in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.

Unraveling the Role of Charge Patterning in the Micellar Structure of Sequence-Defined Amphiphilic Peptoid Oligomers by Molecular Dynamics Simulations

Electrostatic interactions play a significant role in regulating biological systems and have received increasing attention due to their usefulness in designing advanced stimulus-responsive materials. Polypeptoids are highly tunable N-substituted peptidomimetic polymers that lack backbone hydrogen bonding and chirality. Therefore, polypeptoids are suitable systems to study the effect of noncovalent interactions of substituents without complications of backbone intramolecular and intermolecular hydrogen bonding. In this study, all-atom molecular dynamics (MD) simulations were performed on micelles formed by a series of sequence-defined ionic polypeptoid block copolymers consisting of a hydrophobic segment and a hydrophilic segment in an aqueous solution. By combining the results from MD simulations and experimental small-angle neutron scattering data, further insights were gained into the internal structure of the formed polypeptoid micelles, which is not always directly accessible from experiments. In addition, information was gained into the physics of the noncovalent interactions responsible for the self-assembly of weakly charged polypeptoids in an aqueous solution. While the aggregation number is governed by electrostatic repulsion of the negatively charged carboxylate (COO^–) substituents on the polypeptoid chain within the micelle, MD simulations indicate that the position of the charge on singly charged chains mediates the shape of the micelle through the charge–dipole interactions between the COO^– substituent and the surrounding water. Therefore, the polypeptoid micelles formed from the single-charged series offer the possibility for tailorable micelle shapes. In contrast, the polypeptoid micelles formed from the triple-charged series are characterized by more pronounced electrostatic repulsion that competes with more significant charge–sodium interactions, making it difficult to predict the shape of the micelles. This work has helped further develop design principles for the shape and structure of self-assembled micelles by controlling the position of charged moieties on the backbone of polypeptoid block copolymers.

Structural Evolution of a Polystyrene-Block-Poly(Ethylene Oxide) Block Copolymer in Tetrahydrofuran/Water Cosolvents

This study aims to quantitatively investigate the effect of water content on the self-assembly behavior of polystyrene-block-poly(ethylene oxide) (PS-b-PEO) in tetrahydrofuran/water cosolvents by small-angle X-ray scattering. PS-b-PEO chains preferentially form fractal aggregates at a dilute concentration in neat tetrahydrofuran (THF). By adding a small amount of water into THF, PS-b-PEO forms gelled networks. The gelled networks have correlated inhomogeneities, which were generated through mesophase separation. These gelled networks are not present when PS-b-PEO is dissolved in THF/methanol and THF/ethanol cosolvents. The substitution of water with 12 M HCl reduces the viscosity of the gelled networks. Those results indicate that the gelled networks of PS-b-PEO need hydrogen bonds formed from surrounding water molecules to be bridging agents, which connect different PEO block chains together. Upon increasing the water content in THF/water cosolvents, dispersed micelles with a core-shell conformation or aggregated micelles preferentially coexist with fractal aggregates.

DPD Modelling of the Self- and Co-Assembly of Polymers and Polyelectrolytes in Aqueous Media: Impact on Polymer Science

This review article is addressed to a broad community of polymer scientists. We outline and analyse the fundamentals of the dissipative particle dynamics (DPD) simulation method from the point of view of polymer physics and review the articles on polymer systems published in approximately the last two decades, focusing on their impact on macromolecular science. Special attention is devoted to polymer and polyelectrolyte self- and co-assembly and self-organisation and to the problems connected with the implementation of explicit electrostatics in DPD numerical machinery. Critical analysis of the results of a number of successful DPD studies of complex polymer systems published recently documents the importance and suitability of this coarse-grained method for studying polymer systems.

A Close Look at Molecular Self-Assembly with the Transmission Electron Microscope

Molecular self-assembly is pervasive in the formation of living and synthetic materials. Knowledge gained from research into the principles of molecular self-assembly drives innovation in the biological, chemical, and materials sciences. Self-assembly processes span a wide range of temporal and spatial domains and are often unintuitive and complex. Studying such complex processes requires an arsenal of analytical and computational tools. Within this arsenal, the transmission electron microscope stands out for its unique ability to visualize and quantify self-assembly structures and processes. This review describes the contribution that the transmission electron microscope has made to the field of molecular self-assembly. An emphasis is placed on which TEM methods are applicable to different structures and processes and how TEM can be used in combination with other experimental or computational methods. Finally, we provide an outlook on the current challenges to, and opportunities for, increasing the impact that the transmission electron microscope can have on molecular self-assembly.

Cationic Amphiphilic Alternating Copolymers with Tunable Morphology

A series of ionic amphiphilic alternating copolymers were characterized via SAXS, TEM and DLS to help understand factors that could potentially affect self-assembly, including the degree of polymerization, the length of hydrophobic spacers between ionic units, the distance between charged groups and polymer backbone, solvent envrioment and counterions.

Contrast variation of micelles composed of Ca2+ and block copolymers of two negatively charged polyelectrolytes

Block copolymers were prepared with two anionic polyelectrolyte blocks: sodium polyacrylate (PA) and sodium polystyrene sulfonate (PSS), in order to investigate their phase behavior in aqueous solution in the presence of Ca2+ cations. Depending on the concentration of polymer and Ca2+ and on the ratio of the block lengths in the copolymer, spherical micelles were observed. Micelle formation arises from the specific interaction of Ca2+ with the PA block only. An extensive small-angle scattering study was performed in order to unravel the structure and dimensions of the block copolymer micelles. Deuteration of the PA block enabled us to perform contrast variation experiments using small-angle neutron scattering at variable ratios of light and heavy water which were combined with information from small-angle X-ray scattering and dynamic light scattering.

Ion-selective binding as a new trigger for micellization of block copolyelectrolytes with two anionic blocks

This work presents well-defined and switchable micelles of block copolymers consisting of the two anionic polyelectrolytes sodium polyacrylate (NaPA) and sodium polystyrene sulfonate (NaPSS). Micellization occurs due to the specific binding of Ca2+ to acrylate groups, which results in neutralization of the corresponding block and thereby formation of the hydrophobic core of the micelles. In contrast, the PSS block remains charged and forms the stabilizing shell. Micellization is triggered by variations of the Ca2+ concentration or the temperature and is a fully reversible and repeatable process. Small-angle neutron scattering (SANS) could unambiguously reveal the structure of the micelles, using a partially deuterated polymer and the contrast variation technique. Considering the variety of metal cations and their broad spectrum of interactions with polyelectrolytes, this new class of like-charged block copolymers opens the door to a broad range of switchable and responsive polyelectrolyte-based systems.

A mild and quantitative route towards well-defined strong anionic/hydrophobic diblock copolymers: synthesis and aqueous self-assembly

Well-defined hydrophobic/strong anionic diblock copolymers were synthesized through a protected hydrophobic intermediate. Their self-assembly in aqueous solution was subsequently studied.

Block Copolymer Micelles for Photonic Fluids and Crystals

Block copolymer micelles (BCMs) are self-assembled nanoparticles in solution with a collapsed core and a brush-like stabilizing corona typically in the size range of tens of nanometers. Despite being widely studied in various fields of science and technology, their ability to form structural colors at visible wavelength has not received attention, mainly due to the stringent length requirements of photonic lattices. Here, we describe the precision assembly of BCMs with superstretched corona, yet with narrow size distribution to qualify as building blocks for tunable and reversible micellar photonic fluids (MPFs) and micellar photonic crystals (MPCs). The BCMs form free-flowing MPFs with an average interparticle distance of 150-300 nm as defined by electrosteric repulsion arising from the highly charged and stretched corona. Under quiescent conditions, millimeter-sized MPCs with classical FCC lattice grow within the photonic fluid-medium upon refinement of the positional order of the BCMs. We discuss the generic properties of MPCs with special emphasis on surprisingly narrow reflected wavelengths with full width at half-maximum (fwhm) as small as 1 nm. We expect this concept to open a generic and facile way for self-assembled tunable micellar photonic structures.

Formation of complexes in aqueous solutions of amphiphilic triblock polyelectrolytes of different topologies and an oppositely charged protein

The complexation of lysozyme with aggregates from two triblock amphiphilic polyelectrolytes of the same blocks but different topologies and block molar masses, namely PS-b-SCPI-b-PEO and SCPI-b-PS-b-PEO, is investigated by scattering and spectroscopy methods. Light scattering reveals that the interaction with lysozyme causes shrinkage of the self-assembled nanoparticles in the case of the hydrophobic-polyelectrolyte-hydrophilic sequence. In the polyelectrolyte-hydrophobic-hydrophilic sequence, the opposite trend is observed. Small angle neutron scattering confirms the existence of micellar and fractal aggregates and the complexation with lysozyme. The pH-dependence of the interactions and the stability of the hybrid protein/polymer nanoparticles upon salt addition are tested. The native conformation of the protein is found to be preserved during complexation. This study reveals that both micellar and fractal aggregates made of amphiphilic triblock polyelectrolytes are capable of loading with oppositely charged proteins in a controllable manner, tuned primarily by the structure of the triblock terpolymer.

Solution Self-Assemblies of Sequence-Defined Ionic Peptoid Block Copolymers

A series of amphiphilic ionic peptoid block copolymers where the total number (1 or 3) and position of ionic monomers along the polymer chain are precisely controlled have been synthesized by the submonomer method. Upon dissolution in water at pH = 9, the amphiphilic peptoids self-assemble into small spherical micelles having hydrodynamic radius in ∼5-10 nm range and critical micellar concentration (CMC) in the 0.034-0.094 mg/mL range. Small-angle neutron scattering (SANS) analysis of the micellar solutions revealed unprecedented dependence of the micellar structure on the number and position of ionic monomers along the chain. It was found that the micellar aggregation number ( N_agg) and the micellar radius ( R_m) both increase as the ionic monomer is positioned progressively away from the junction of the hydrophilic and hydrophobic segments along the polymer chain. By defining an ionic monomer position number ( n) as the number of monomers between the junction and the ionic monomer, N_agg exhibited a power law dependence on n with an exponent of ∼1/3 and ∼3/10 for the respective singly and triply charged series. By contrast, R_m exhibited a weaker dependence on the ionic monomer position by a power law relationship with an exponent of ∼1/10 and ∼1/20 for the respective singly and triply charged series. Furthermore, R_m was found to scale with N_agg in a power-law relationship with an exponent of 0.32 for the singly charged series, consistent with a weakly charged ionic star-like polymer model in the unscreened regime. This study demonstrated a unique method to precisely tailor the structure of small spherical micelles based on ionic block copolymers by controlling the sequence and position of the ionic monomer.

Effective short-range Coulomb correction to model the aggregation behavior of ionic surfactants

We present a short-range correction to the Coulomb potential to investigate the aggregation of amphiphilic molecules in aqueous solutions. The proposed modification allows to quantitatively reproduce the distribution of counterions above the critical micelle concentration (CMC) or, equivalently, the degree of ionization, α, of the micellar clusters. In particular, our theoretical framework has been applied to unveil the behavior of the cationic surfactant C24H49N2O2 (+) CH3SO4 (-), which offers a wide range of applications in the thriving and growing personal care market. A reliable and unambiguous estimation of α is essential to correctly understand many crucial features of the micellar solutions, such as their viscoelastic behavior and transport properties, in order to provide sound formulations for the above mentioned personal care solutions. We have validated our theory by performing extensive lattice Monte Carlo simulations, which show an excellent agreement with experimental observations. More specifically, our coarse-grained model is able to reproduce and predict the complex morphology of the micelles observed at equilibrium. Additionally, our simulation results disclose the existence of a transition from a monodisperse to a bidisperse size distribution of aggregates, unveiling the intriguing existence of a second CMC.

High-Capacity Drug Carriers from Common Polymer Amphiphiles

We report herein a dual-purpose role for polyacidic domains in an aqueous-phase polymer amphiphile assembly. In addition to their typical role as ionized water-solubilizing and self-repulsive motifs, we find that polycarboxylic acid domains uniquely enable high levels of hydrophobic drug encapsulation. By attenuated total reflectance infrared spectroscopy, we find significant differences in the carbonyl stretching region of the nanoparticles formed by polyacidic amphiphiles relative to those in soluble, single-domain poly(acrylic acid), suggesting that stabilization may be derived from limited ionization of the carboxylate groups upon assembly. Acidic-hydrophobic diblock polyacrylates were prepared and coassembled with up to 60 wt % camptothecin (CPT) into nanoparticles, the highest loading reported to date. Controlled release of bioactive CPT from polymer nanoparticles is observed, as well as protection from human serum albumin-induced hydrolysis. Surface protection with PEG limits uptake of the CPT-loaded nanoparticles by MCF-7 breast cancer cells, as expected. Acidic-hydrophobic polymer amphiphiles thus have the hallmarks of a useful and general drug delivery platform and are readily accessible from living radical polymerization of cheap, commercially available monomers. We highlight here the potential utility of this common polymer design in high-capacity, controlled-release polymer nanoparticle systems.

Thermoresponsive behavior of micellar aggregates from end-functionalized PnBA-b-PNIPAM-COOH block copolymers and their complexes with lysozyme

The temperature response of micellar aggregates of poly(n-butyl acrylate)-b-poly(N-isopropylacrylamide)-carboxylic acid (PnBA-b-PNIPAM-COOH) end-functionalized diblock copolymers in aqueous solutions is investigated by small angle neutron scattering and light scattering techniques. The particular micellar aggregates present -COOH groups at their surface due to the molecular architecture of the block copolymer chains. Above the critical solution temperature micellar aggregation depends on the initial solution concentration, while at the highest polymer content intermicellar correlations are observed as a hard-sphere interaction intensity peak. Addition of lysozyme induces this morphological transition even at low concentrations. The scattering profiles are consistent with lysozyme accumulating in the vicinity of the micellar cores, a finding that is supported by measurements in lysozyme contrast matched solvent. Upon temperature increase negatively charged units are exposed to the surface of the aggregates during thermal transition which is a stabilizing force against the phase separating coil-to-globule transition of poly(N-isopropylacrylamide) (PNIPAM).

Influence of Corona Structure on Binding of an Ionic Surfactant in Oppositely Charged Amphiphilic Polyelectrolyte Micelles

Interaction of polystyrene-block-poly(methacrylic acid) micelles (PS-PMAA) with cationic surfactant N-dodecylpyridinium chloride (DPCl) in alkaline aqueous solutions was studied by static and dynamic light scattering, SAXS, cryogenic transmission electron microscopy (cryo-TEM), isothermal titration calorimetry (ITC), and time-resolved fluorescence spectroscopy. ITC and fluorescence measurements show that there are two distinct regimes of surfactant binding in the micellar corona (depending on the DPCl content) caused by different interactions of DPCl with PMAA in the inner and outer parts of the corona. The compensation of the negative charge of the micellar corona by DPCl leads to the aggregation of PS-PMAA micelles, and the micelles form colloidal aggregates at a certain critical surfactant concentration. SAXS shows that the aggregates are formed by individual PS-PMAA micelles with intact cores and collapsed coronas interconnected with surfactant micelles by electrostatic interactions. Unlike polyelectrolyte-surfactant complexes formed by free polyelectrolyte chains, the PMAA/DPCl complex with collapsed corona does not contain surfactant micelles.

Prediction of solvent-induced morphological changes of polyelectrolyte diblock copolymer micelles

Self-assembly processes of polyelectrolyte block copolymers are ubiquitous in industrial and biological processes; understanding their physical properties can also provide insights into the design of polyelectrolyte materials with novel and tailored properties. Here, we report systematic analysis on how the ionic strength of the solvent and the length of the polyelectrolyte block affect the self-assembly and morphology of the polyelectrolyte block copolymer materials by constructing a salt-dependent morphological phase diagram using an implicit solvent ionic strength (ISIS) method for dissipative particle dynamics (DPD) simulations. This diagram permits the determination of the conditions for the morphological transition into a specific shape, namely vesicles or lamellar aggregates, wormlike/cylindrical micelles, and spherical micelles. The scaling behavior for the size of spherical micelles is predicted, in terms of radius of gyration (R(g,m)) and thickness of corona (Hcorona), as a function of solvent ionic strength (c(s)) and polyelectrolyte length (NA), which are R(g,m) ∼ c(s)(-0.06)N(A)(0.54) and Hcorona ∼ c(s)(-0.11)N(A)(0.75). The simulation results were corroborated through AFM and static light scattering measurements on the example of the self-assembly of monodisperse, single-stranded DNA block-copolynucleotides (polyT50-b-F-dUTP). Overall, we were able to predict the salt-responsive morphology of polyelectrolyte materials in aqueous solution and show that a spherical-cylindrical-lamellar change in morphology can be obtained through an increase in solvent ionic strength or a decrease of polyelectrolyte length.

Self-assembly concepts for multicompartment nanostructures

Compartmentalization is ubiquitous to many biological and artificial systems, be it for the separate storage of incompatible matter or to isolate transport processes. Advancements in the synthesis of sequential block copolymers offer a variety of tools to replicate natural design principles with tailor-made soft matter for the precise spatial separation of functionalities on multiple length scales. Here, we review recent trends in the self-assembly of amphiphilic block copolymers to multicompartment nanostructures (MCNs) under (semi-)dilute conditions, with special emphasis on ABC triblock terpolymers. The intrinsic immiscibility of connected blocks induces short-range repulsion into discrete nano-domains stabilized by a third, soluble block or molecular additive. Polymer blocks can be synthesized from an arsenal of functional monomers directing self-assembly through packing frustration or response to various fields. The mobility in solution further allows the manipulation of self-assembly processes into specific directions by clever choice of environmental conditions. This review focuses on practical concepts that direct self-assembly into predictable nanostructures, while narrowing particle dispersity with respect to size, shape and internal morphology. The growing understanding of underlying self-assembly mechanisms expands the number of experimental concepts providing the means to target and manipulate progressively complex superstructures.

Hidden structural features of multicompartment micelles revealed by cryogenic transmission electron tomography

The demand for ever more complex nanostructures in materials and soft matter nanoscience also requires sophisticated characterization tools for reliable visualization and interpretation of internal morphological features. Here, we address both aspects and present synthetic concepts for the compartmentalization of nanoparticle peripheries as well as their in situ tomographic characterization. We first form negatively charged spherical multicompartment micelles from ampholytic triblock terpolymers in aqueous media, followed by interpolyelectrolyte complex (IPEC) formation of the anionic corona with bis-hydrophilic cationic/neutral diblock copolymers. At a 1:1 stoichiometric ratio of anionic and cationic charges, the so-formed IPECs are charge neutral and thus phase separate from solution (water). The high chain density of the ionic grafts provides steric stabilization through the neutral PEO corona of the grafted diblock copolymer and suppresses collapse of the IPEC; instead, the dense grafting results in defined nanodomains oriented perpendicular to the micellar core. We analyze the 3D arrangements of the complex and purely organic compartments, in situ, by means of cryogenic transmission electron microscopy (cryo-TEM) and tomography (cryo-ET). We study the effect of block lengths of the cationic and nonionic block on IPEC morphology, and while 2D cryo-TEM projections suggest similar morphologies, cryo-ET and computational 3D reconstruction reveal otherwise hidden structural features, e.g., planar IPEC brushes emanating from the micellar core.

Enhanced Fluorescence Properties of Poly(phenylene ethynylene)-Conjugated Polyelectrolytes Designed to Avoid Aggregation

A new class of nonaggregating conjugated polyelectrolytes exhibits efficient fluorescence in aqueous solution. Analysis by optical spectroscopy and transmission electron microscopy reveals a unique structure-property correlation between oxygen substitution and aggregation.

Chitosan/alkylethoxy carboxylates: a surprising variety of structures

In this work, we present a comprehensive structural characterization of long-term stable complexes formed by biopolycation chitosan and oppositely charged nonaoxyethylene oleylether carboxylate. These two components are attractive for many potential applications, with chitosan being a bioderived polymer and the surfactant being ecologically benign and mild. Experiments were performed at different mixing ratios Z (ratio of the nominal charges of surfactant/polyelectrolyte) and different pH values such that the degree of ionization of the surfactant is largely changed whereas that of chitosan is only slightly affected. The structural characterization was performed by combining static and dynamic light scattering (SLS and DLS) and small-angle neutron scattering (SANS) to cover a large structural range. Highly complex behavior is observed, with three generic structures formed that depend on pH and the mixing ratio, namely, (i) a micelle-decorated network at low Z and pH, (ii) rodlike complexes with the presence of aligned micelles at medium Z and pH, and (iii) compacted micellar aggregates forming a supraaggregate surrounded by a chitosan shell at high Z and pH. Accordingly, the state of aggregation in these mixtures can be tuned structurally over quite a range only by rather small changes in pH.

Interaction of a hydrophobic weak polyelectrolyte star with an apolar surface

We consider star-like polymers with weak, that is, pH-dependent, hydrophobic polyelectrolyte arms. For low ionic strength conditions, a microphase-segregated quasimicellar structure is found, for which the star features a compact apolar core and a charged and swollen corona. This state is jump-like lost when the ionic strength is increased, i.e., at some intermediate ionic strength value. Using numerical self-consistent field modeling, we focus on the adsorption characteristics of these objects onto hydrophobic surfaces as a function of the ionic strength. In the quasimicellar state, the stars are attracted to the surface, albeit that, typically, an adsorption barrier is present. The strongest repulsion is found at intermediate ionic strength, where the star-like molecule is in a single-phase state and the barrier remains modest at both low and high ionic strength cases. Remarkably, it is possible that a star in a single swollen phase state is pushed into the quasimicellar state.

Direct and indirect core–shell inversion of block copolymer micelles

A novel block copolymer PNIPAm-b-PBOB is reported where denaturation of PNIPAm and PBOB is switched by independent, controllable stimuli. Core–shell inversion may be realized via different pathways, indirect and direct, by adjusting the program of imposing the stimuli.

Multiresponsive Micellar Systems from Photocleavable Block Copolymers

This contribution describes the synthesis and associating behavior in water of a multiresponsive amphiphilic diblock copolymer. This copolymer is composed of an hydrophobic photocleavable poly(para-methoxyphenacyl methacrylate) block (PMPMA) and a hydrophilic thermosensitive poly[(oligo ethylene glycol)methacrylate] block (POEGMA). The PMPMA-b-POEGMA copolymer forms micelles with a PMPMA core and a POEGMA corona in water. Light irradiation leads to the transformation of PMPMA into poly(methacrylic acid) (PMAA) and to the disruption of the initial micelles. The response of the accordingly obtained PMAA-b-POEGMA copolymer to pH, temperature, calcium (Ca²⁺), and phosphate (PO₄^3-) ions is demonstrated.

Hybrid polyion complex micelles formed from double hydrophilic block copolymers and multivalent metal ions: size control and nanostructure

Hybrid polyion complex (HPIC) micelles are nanoaggregates obtained by complexation of multivalent metal ions by double hydrophilic block copolymers (DHBC). Solutions of DHBC such as the poly(acrylic acid)-block-poly(acrylamide) (PAA-b-PAM) or poly(acrylic acid)-block-poly(2-hydroxyethylacrylate) (PAA-b-PHEA), constituted of an ionizable complexing block and a neutral stabilizing block, were mixed with solutions of metal ions, which are either monoatomic ions or metal polycations, such as Al(3+), La(3+), or Al(13)(7+). The physicochemical properties of the HPIC micelles were investigated by small angle neutron scattering (SANS) and dynamic light scattering (DLS) as a function of the polymer block lengths and the nature of the cation. Mixtures of metal cations and asymmetric block copolymers with a complexing block smaller than the stabilizing block lead to the formation of stable colloidal HPIC micelles. The hydrodynamic radius of the HPIC micelles varies with the polymer molecular weight as M(0.6). In addition, the variation of R(h) of the HPIC micelle is stronger when the complexing block length is increased than when the neutral block length is increased. R(h) is highly sensitive to the polymer asymmetry degree (block weight ratio), and this is even more true when the polymer asymmetry degree goes down to values close to 3. SANS experiments reveal that HPIC micelles exhibit a well-defined core-corona nanostructure; the core is formed by the insoluble dense poly(acrylate)/metal cation complex, and the diffuse corona is constituted of swollen neutral polymer chains. The scattering curves were modeled by an analytical function of the form factor; the fitting parameters of the Pedersen's model provide information on the core size, the corona thickness, and the aggregation number of the micelles. For a given metal ion, the micelle core radius increases as the PAA block length. The radius of gyration of the micelle is very close to the value of the core radius, while it varies very weakly with the neutral block length. Nevertheless, the radius of gyration of the micelle is highly dependent on the asymmetry degree of the polymer: if the neutral block length increases in a large extent, the micelle radius of gyration decreases due to a decrease of the micelle aggregation number. The variation of the R(g)/R(h) ratio as a function of the polymer block lengths confirms the nanostructure associating a dense spherical core and a diffuse corona. Finally, the high stability of HPIC micelles with increasing concentration is the result of the nature of the coordination complex bonds in the micelle core.

pH/Temperature-responsive behavior of amphiphilic block copolymer micelles prepared using two different methods

The pH- and temperature-responsive behavior of amphiphilic block copolymer poly(L-lactide)-b-poly(2-(dimethylamino)ethyl methacrylate) (PLLA-b-PDMAEMA) in aqueous solutions is investigated using static and dynamic light scattering. Electrostatic force, hydrophobic interaction, and hydrogen bonding coexist in the system. Micelles with different structures are prepared using water addition (WA) and direct dissolution (DD) methods. The aggregation from loose micelles into large micellar clusters is observed above the transition temperature under basic conditions. Only micellar clusters from the DD method could disaggregate when temperature was decreased to 24.3 °C after heating. The behavior of the micelles prepared with the DD method indicates that only the outer parts of the PLLA-b-PDMAEMA chains in the corona are solvated.

Disintegration-controllable stimuli-responsive polyelectrolyte multilayer microcapsules via covalent layer-by-layer assembly

The disintegration-controllable stimuli-responsive polyelectrolyte multilayer microcapsules have been fabricated via the covalent layer-by-layer assembly between the amino groups of chitosan (CS) and the aldehyde groups of the oxidized sodium alginate (OSA) onto the sacrificial templates (polystyrene sulfonate, PSS) which was removed by dialysis subsequently. The covalent crosslinking bonds of the multilayer microcapsules were confirmed by FTIR analysis. The TEM analysis showed that the diameter of the multilayer microcapsules was <200nm. The diameter of the multilayer microcapsules decreased with the increasing of the pH values or the ionic strength. The pH and ionic strength dual-responsive multilayer microcapsules were stable in acidic and neutral media while they could disintegrate only at strong basic media.