Plasmon-enhanced photocatalytic activity of iron oxide on gold nanopillars

Nanowire photochemical diodes for artificial photosynthesis

Artificial photosynthesis can provide a solution to our current energy needs by converting small molecules such as water or carbon dioxide into useful fuels. This can be accomplished using photochemical diodes, which interface two complementary light absorbers with suitable electrocatalysts. Nanowire semiconductors provide unique advantages in terms of light absorption and catalytic activity, yet great control is required to integrate them for overall fuel production. In this review, we journey across the progress in nanowire photoelectrochemistry (PEC) over the past two decades, revealing design principles to build these nanowire photochemical diodes. To this end, we discuss the latest progress in terms of nanowire photoelectrodes, focusing on the interplay between performance, photovoltage, electronic band structure, and catalysis. Emphasis is placed on the overall system integration and semiconductor-catalyst interface, which applies to inorganic, organic, or biologic catalysts. Last, we highlight further directions that may improve the scope of nanowire PEC systems.

Photocatalytic Degradation of Methylene Blue and Ortho-Toluidine Blue: Activity of Lanthanum Composites LaxMOy (M: Fe, Co, Ni)

Lanthanum (La) nanocomposites LaFeO3, LaNiO3, and LaCoO3 were synthesized using a sol-gel method, and different La to-metal (Fe, Ni, or Co) ratios were attained using various concentrations of salts. The resulting composites were calcined at 540 °C and characterized by XRD, SEM-EDX, FT-IR spectroscopy, XPS, thermogravimetric analysis (TGA), and PL spectroscopy. The activity of the lanthanum composites (LaFeO3, LaNiO3, and LaCoO3) was studied using the photocatalytic degradation of methylene blue (MB) and ortho-toluidine blue (o-TB) under visible light with a wavelength below 420 nm. The change in the concentration of dyes was monitored by using the UV-Vis spectroscopy technique. All composites appeared to have some degree of photocatalytic activity, with composites possessing an orthorhombic crystal structure having higher photocatalytic activity. The LaCoO3 composite is more efficient compared with LaFeO3 and LaNiO3 for both dyes. High degradation percentages were observed for the La composites with a 1:1 metal ratio.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Band gap and Morphology Engineering of Hematite Nanoflakes from an Ex Situ Sn Doping for Enhanced Photoelectrochemical Water Splitting

In this article, we report a simple ex situ Sn-doping method on hematite nanoflakes (coded as MSnO2-H) that can protect the nanoflake (NF) morphology against the 800 °C high-temperature annealing process and activate the photoresponse of hematite until 800 nm wavelength excitation. MSnO2-H has been fabricated by dropping SnCl4 ethanol solution on hematite nanoflakes homogeneously grown over the conductive FTO glass substrate and annealed at 500 °C to synthesize the SnO2 nanoparticles on hematite NFs. The Sn-treated samples were then placed in a furnace again, and the sintering process was conducted at 800 °C for 15 min. During this step, structure deformation of hematite occurs normally due to the grain boundary motion and oriented attachment. However, in the case of MSnO2-H, the outer SnO2 nanoparticles efficiently prevented a shape deformation and maintained the nanoflake shape owing to the encapsulation of hematite NFs. Furthermore, the interface of hematite/SnO2 nanoparticles became the spots for a heavy Sn ion doping. We demonstrated the generation of the newly localized states, resulting in an extension of the photoresponse of hematite until 800 nm wavelength light irradiation. Furthermore, we demonstrated that SnO2 nanoparticles can effectively act as a passivation layer, which can reduce the onset potential of hematite for water splitting redox reactions. The optimized MSnO2-H nanostructures showed a 2.84 times higher photocurrent density and 300 mV reduced onset potential compared with a pristine hematite nanoflake photoanode.

Latest Advances in Metasurfaces for SERS and SEIRA Sensors as Well as Photocatalysis

Metasurfaces can enable the confinement of electromagnetic fields on huge surfaces and zones, and they can thus be applied to biochemical sensing by using surface-enhanced Raman scattering (SERS) and surface-enhanced infrared absorption (SEIRA). Indeed, these metasurfaces have been examined for SERS and SEIRA sensing thanks to the presence of a wide density of hotspots and confined optical modes within their structures. Moreover, some metasurfaces allow an accurate enhancement of the excitation and emission processes for the SERS effect by supporting resonances at frequencies of these processes. Finally, the metasurfaces allow the enhancement of the absorption capacity of the solar light and the generation of a great number of catalytic active sites in order to more quickly produce the surface reactions. Here, we outline the latest advances in metasurfaces for SERS and SEIRA sensors as well as photocatalysis.

Enhanced Light Absorption and Efficient Carrier Collection in MoS2 Monolayers on Au Nanopillars

We fabricated hybrid nanostructures consisting of MoS2 monolayers and Au nanopillar (Au-NP) arrays. The surface morphology and Raman spectra showed that the MoS2 flakes transferred onto the Au-NPs were very flat and nonstrained. The Raman and photoluminescence intensities of MoS2/Au-NP were 3- and 20-fold larger than those of MoS2 flakes on a flat Au thin film, respectively. The finite-difference time-domain calculations showed that the Au-NPs significantly concentrated the incident light near their surfaces, leading to broadband absorption enhancement in the MoS2 flakes. Compared with a flat Au thin film, the Au-NPs enabled a 6-fold increase in the absorption in the MoS2 monolayer at a wavelength of 615 nm. The contact potential difference mapping showed that the electric potential at the MoS2/Au contact region was higher than that of the suspended MoS2 region by 85 mV. Such potential modulation enabled the Au-NPs to efficiently collect photogenerated electrons from the MoS2 flakes, as revealed by the uniform positive surface photovoltage signals throughout the MoS2 surface.

Anisotropy of DNA molecule detection and enhancement by GaN-based electronic sensor

An electrical characterization approach with a newly, to the best of our knowledge, defined electrical anisotropy (η) was proposed to characterize and enhance the anisotropy signals of DNA molecules. This approach utilizes L-shaped aluminum gratings on a gallium nitride PiN electronic sensor system to adjust and improve the η signals. Using this approach, the η signals of DNA molecules can be adjusted more easily and efficiently by changing the electrical parameters of the sensor. For instance, the η modes of DNA were enhanced more than 22 times with the change of the incident power and the reverse bias voltage of the PiN structure.

Ordered nanostructures arrays fabricated by anodic aluminum oxide (AAO) template-directed methods for energy conversion

Clean and efficient energy conversion systems can overcome the depletion of the fossil fuel and meet the increasing demand of the energy. Ordered nanostructures arrays convert energy more efficiently than their disordered counterparts, by virtue of their structural merits. Among various fabrication methods of these ordered nanostructures arrays, anodic aluminum oxide (AAO) template-directed fabrication have drawn increasing attention due to its low cost, high throughput, flexibility and high structural controllability. This article reviews the application of ordered nanostructures arrays fabricated by AAO template-directed methods in mechanical energy, solar energy, electrical energy and chemical energy conversions in four sections. In each section, the corresponding advantages of these ordered nanostructures arrays in the energy conversion system are analysed, and the limitation of the to-date research is evaluated. Finally, the future directions of the ordered nanostructures arrays fabricated by AAO template-directed methods (the promising method to explore new growth mechanisms of AAO, green fabrication based on reusable AAO templates, new potential energy conversion application) are discussed.

Site-Selective Photosynthesis of Ag-AgCl@Au Nanomushrooms for NIR-II Light-Driven O2- and O2•--Evolving Synergistic Photothermal Therapy against Deep Hypoxic Tumors

Light-driven endogenous water oxidation has been considered as an attractive and desirable way to obtain O2 and reactive oxygen species (ROS) in the hypoxic tumor microenvironment. However, the use of a second near-infrared (NIR-II) light to achieve endogenous H2O oxidation to alleviate tumor hypoxia and realize deep hypoxic tumor phototherapy is still a challenge. Herein, novel plasmonic Ag-AgCl@Au core-shell nanomushrooms (NMs) were synthesized by the selective photodeposition of plasmonic Au at the bulge sites of the Ag-AgCl nanocubes (NCs) under visible light irradiation. Upon NIR-II light irradiation, the resulting Ag-AgCl@Au NMs could oxidize endogenous H2O to produce O2 to alleviate tumor hypoxia. Almost synchronously, O2 could react with electrons on the conduction band of the AgCl core to generate superoxide radicals (O2•-)for photodynamic therapy. Moreover, Ag-AgCl@Au NMs with an excellent photothermal performance could further promote the phototherapy effect. In vitro and in vivo experimental results show that the resulting Ag-AgCl@Au NMs could significantly improve tumor hypoxia and enhance phototherapy against a hypoxic tumor. The present study provides a new strategy to design H2O-activatable, O2- and ROS-evolving NIR II light-response nanoagents for the highly efficient and synergistic treatment of deep O2-deprived tumor tissue.

Nanoarray Structures for Artificial Photosynthesis

Conversion and storage of solar energy into fuels and chemicals by artificial photosynthesis has been considered as one of the promising methods to address the global energy crisis. However, it is still far from the practical applications on a large scale. Nanoarray structures that combine the advantages of nanosize and array alignment have demonstrated great potential to improve solar energy conversion efficiency, stability, and selectivity. This article provides a comprehensive review on the utilization of nanoarray structures in artificial photosynthesis of renewable fuels and high value-added chemicals. First, basic principles of solar energy conversion and superiorities of using nanoarray structures in this field are described. Recent research progress on nanoarray structures in both abiotic and abiotic-biotic hybrid systems is then outlined, highlighting contributions to light absorption, charge transport and transfer, and catalytic reactions (including kinetics and selectivity). Finally, conclusions and outlooks on future research directions of nanoarray structures for artificial photosynthesis are presented.

Improving the CO and CH4 Gas Sensor Response at Room Temperature of α-Fe2O3(0001) Epitaxial Thin Films Grown on SrTiO3(111) Incorporating Au(111) Islands

In this work, the functional character of complex α-Fe2O3(0001)/SrTiO3(111) and Au(111) islands/α-Fe2O3(0001)/SrTiO3(111) heterostructures has been proven as gas sensors at room temperature. Epitaxial Au islands and α-Fe2O3 thin film are grown by pulsed laser deposition on SrTiO3(111) substrates. Intrinsic parameters such as the composition, particle size and epitaxial character are investigated for their influence on the gas sensing response. Both Au and α-Fe2O3 layer show an island-type growth with an average particle size of 40 and 62 nm, respectively. The epitaxial and incommensurate growth is evidenced, confirming a rotation of 30° between the in-plane crystallographic axes of α-Fe2O3(0001) structure and those of SrTiO3(111) substrate and between the in-plane crystallographic axes of Au(111) and those of α-Fe2O3(0001) structure. α-Fe2O3 is the only phase of iron oxide identified before and after its functionalization with Au nanoparticles. In addition, its structural characteristics are also preserved after Au deposition, with minor changes at short-range order. Conductance measurements of Au(111)/α-Fe2O3(0001)/SrTiO3(111) system show that the incorporation of epitaxial Au islands on top of the α-Fe2O3(0001) layer induces an enhancement of the gas-sensing activity of around 25% under CO and 35% under CH4 gas exposure, in comparison to a bare α-Fe2O3(0001) layer grown on SrTiO3(111) substrates. In addition, the response of the heterostructures to CO gas exposure is around 5–10% higher than to CH4 gas in each case.

Improving Photocatalytic Performance Using Nanopillars and Micropillars

A recent research emphasis has been placed on the development of highly crystallized nanostructures as a useful technology for many photocatalytic applications. With the unique construction of semiconductor transition metal oxide nanostructures in the form of nanopillars-artificially designed pillar-shaped structures grouped together in lattice-type arrays-the surface area for photocatalytic potential is increased and further enhanced through the introduction of dopants. This short review summarizes the work on improving the efficiency of photocatalyst nanopillars through increased surface area and doping within the applications of water splitting, removal of organic pollutants from the environment, photoswitching, soot oxidation, and photothermalization.

Isotope Effects in Plasmonic Photosynthesis

The photoexcitation of plasmonic nanoparticles has been shown to drive multistep, multicarrier transformations, such as the conversion of CO₂ into hydrocarbons. But for such plasmon-driven chemistry to be precisely understood and modeled, the critical photoinitiation step in the reaction cascade must be identified. We meet this goal by measuring H/D and ¹² C/¹³ C kinetic isotope effects (KIEs) in plasmonic photosynthesis. In particular, we found that the substitution of H₂ O with D₂ O slows hydrocarbon production by a factor of 5-8. This primary H/D KIE leads to the inference that hole-driven scission of the O-H bond in H₂ O is a critical, limiting step in plasmonic photosynthesis. This study advances mechanistic understanding of light-driven chemical reactions on plasmonic nanoparticles.

Advances in Manufacturing Composite Carbon Nanofiber-Based Aerogels

This article provides an overview on manufacturing composite carbon nanofiber-based aerogels through freeze casting technology. As known, freeze casting is a relatively new manufacturing technique for generating highly porous structures. During the process, deep cooling is used first to rapidly solidify a well-dispersed slurry. Then, vacuum drying is conducted to sublimate the solvent. This allows the creation of highly porous materials. Although the freeze casting technique was initially developed for porous ceramics processing, it has found various applications, especially for making aerogels. Aerogels are highly porous materials with extremely high volume of free spaces, which contributes to the characteristics of high porosity, ultralight, large specific surface area, huge interface area, and in addition, super low thermal conductivity. Recently, carbon nanofiber aerogels have been studied to achieve exceptional properties of high stiffness, flame-retardant and thermal-insulating. The freeze casting technology has been reported for preparing carbon nanofiber composite aerogels for energy storage, energy conversion, water purification, catalysis, fire prevention etc. This review deals with freeze casting carbon nanofiber composite materials consisting of functional nanoparticles with exceptional properties. The content of this review article is organized as follows. The first part will introduce the general freeze casting manufacturing technology of aerogels with the emphasis on how to use the technology to make nanoparticle-containing composite carbon nanofiber aerogels. Then, modeling and characterization of the freeze cast particle-containing carbon nanofibers will be presented with an emphasis on modeling the thermal conductivity and electrical conductivity of the carbon nanofiber network aerogels. After that, the applications of the carbon nanofiber aerogels will be described. Examples of energy converters, supercapacitors, secondary battery electrodes, dye absorbents, sensors, and catalysts made from composite carbon nanofiber aerogels will be shown. Finally, the perspectives to future work will be presented.

Hematite coated, conductive Y doped ZnO nanorods for high efficiency solar water splitting

For the first time, hematite (α-Fe₂O₃) crystals were electrochemically deposited over vertically aligned conductive zinc oxide nanorods (NR) to form a specially designed 3D heterostructure with a unique triple layer structure. The structure formed with a thin layer of ZnFe₂O₄ sandwiched between the hematite and the ZnO, which forms a barrier to reduce the back migration of holes. Hence, the charge separation is significantly improved. The small unequal bandgaps of α-Fe₂O₃ and ZnFe₂O₄ help to enhance and broaden visible light absorption. The electron transportation was further improved by yttrium doping in the ZnO (YZnO) NRs, resulting in increased conductivity. This allowed the vertically aligned NRs to perform as electron highways, which also behave as effective optical waveguides for improved light trapping and absorption, since ZnO absorbs little visible light. All these benefits made the unique structures suitable for high performance photoelectrochemical (PEC) water splitting. Optimisation of α-Fe₂O₃ thickness led to a photocurrent density improvement from 0.66 to 0.95 mA cm^-2 at 1.23 V_RHE. This was further improved to 1.59 mA cm^-2 by annealing at 550 °C for 3 h, representing a record-breaking photocurrent for α-Fe₂O₃/ZnO systems. Finally IPCE confirmed the successful generation and transfer of photoelectrons under visible light excitation in the specifically designed heterostructure photoanode, with 5% efficiency for blue light, and 15% for violet light.

Mapping Hot Electron Response of Individual Gold Nanocrystals on a TiO2 Photoanode

Incorporating metal nanocrystals with semiconductor photoanodes significantly enhances the efficiency of the energy conversion in the visible range during water splitting due to the excitation of hot electrons. While extensively studied on ensemble samples, hot electron response of metal nanocrystals in a photoelectrochemical cell remains unexploited at the single-particle level. Herein, we systematically investigate hot electron response of individual single-crystalline gold nanocrystals (AuNCs) on a TiO₂ photoanode during water splitting. We directly correlate the morphology of the AuNC and its plasmonic property to the efficiencies involving hot electrons with the help of single-particle dark-field microscopy and photocurrent mapping. Our results show that the efficiencies of individual AuNCs are dependent on a variety of factors including interface condition, applied bias, excitation power, incident angle, and AuNC size. Our research may shed light on optimizing the light-harvesting capability of metal/semiconductor photoanodes by providing insights into the photocatalytic processes.

Metal/semiconductor interfaces in nanoscale objects: synthesis, emerging properties and applications of hybrid nanostructures

Hybrid nanostructures, composed of multi-component crystals of various shapes, sizes and compositions are much sought-after functional materials. Pairing the ability to tune each material separately and controllably combine two (or more) domains with defined spatial orientation results in new properties. In this review, we discuss the various synthetic mechanisms for the formation of hybrid nanostructures of various complexities containing at least one metal/semiconductor interface, with a focus on colloidal chemistry. Different synthetic approaches, alongside the underlying kinetic and thermodynamic principles are discussed, and future advancement prospects are evaluated. Furthermore, the proved unique properties are reviewed with emphasis on the connection between the synthetic method and the resulting physical, chemical and optical properties with applications in fields such as photocatalysis.

Highly efficient utilization of light and charge separation over a hematite photoanode achieved through a noncontact photonic crystal film for photoelectrochemical water splitting

Highly efficient utilization of light and charge separation over a hematite photoanode could be achieved through a noncontact photonic crystal film.

Improving the Water Oxidation Efficiency with a Light-Induced Electric Field in Nanograting Photoanodes

Severe charge recombination in solar water-splitting devices significantly limits their performance. To address this issue, we design a frustum of a cone nanograting configuration by taking the hematite and Au-based thin-film photoanode as a model system, which greatly improves the photoelectrochemical water oxidation activity, affording an approximately 10-fold increase in the photocurrent density at 1.23 V versus the reversible hydrogen electrode compared to the planar counterpart. The surface plasmon polariton-induced electric field in hematite plays a dominant role in efficiency enhancement by facilitating charge separation, thus dramatically increasing the incident photon-to-current efficiency (IPCE) by more than 2 orders of magnitude in the near band gap of hematite. And the relatively weak electric field caused by light scattering in the nanograting structure is responsible for the approximate maximum 20-fold increase in IPCE within a broadband wavelength range. Our scalable strategy can be generalized to other solar energy conversion systems.

Gap-plasmon enhanced water splitting with ultrathin hematite films: the role of plasmonic-based light trapping and hot electrons

Hydrogen is a promising alternative renewable fuel for meeting the growing energy demands of the world. Over the past few decades, photoelectrochemical water splitting has been widely studied as a viable technology for the production of hydrogen utilizing solar energy. A solar-to-hydrogen (STH) efficiency of 10% is considered to be sufficient for practical applications. Amongst the wide class of semiconductors that have been studied for their application in solar water splitting, iron oxide (α-Fe₂O₃), or hematite, is one of the more promising candidate materials, with a theoretical STH efficiency of 15%. In this work, we show experimentally that by utilizing gold nanostructures that support gap-plasmon resonances together with a hematite layer, we can increase the water oxidation photocurrent by two times over that demonstrated by a bare hematite film at wavelengths above the hematite bandgap. Moreover, we achieve a six-fold increase in the oxidation photocurrent at near-infrared wavelengths, which is attributed to hot electron generation and decay in the gap-plasmon nanostructures. Theoretical simulations confirmed that the metamaterial geometry with gap plasmons that was used allows us to confine electromagnetic fields inside the hematite semiconductor and to enhance the surface photochemistry.

Alteration of the electronic structure and the optical properties of graphitic carbon nitride by metal ion doping

The photoluminescence quenching of graphitic carbon nitride (GCN) was systematically investigated with the doping of transition metal ions. The photoluminescence spectra of metal doped and pristine GCN were monitored and the trend of quenching efficiency was found to be Cu²⁺ > Co²⁺ > Mn²⁺. Interestingly, with the increasing doping concentration of different metal ions simultaneous red shift and luminescence quenching was determined in the photoluminescence spectra as well as increased absorption tail in longer wavelength hence enhancement in the bandgap. The change in the optical properties could be mainly due to structural reconstruction and doping induced electronic redistribution is discussed.

Plasmonic Pt nanoparticles-TiO2 hierarchical nano-architecture as a visible light photocatalyst for water splitting

Visible light-driven water splitting (VLWS) into hydrogen and oxygen is attractive and depends on efficient photocatalysts. Herein, we demonstrate the first exploration of the capability to control the morphology of nanostructured TiO₂ in conjunction with the choice of a suitable plasmonic metal (PM) to fabricate novel photocatalysts that are capable of harvesting visible light for more efficient VL-fuel conversion. This methodology affords us to successful access to the novel plasmonic Pt/TiO₂-HA (large Pt nanoparticles (NPs) supported on TiO₂ hierarchical nano-architecture (TiO₂-HA)) photocatalysts that exhibit plasmon absorption in the visible range and consequent outstanding activity and durability for VLWS. Particularly, the Pt/TiO₂-HA shows an excellent photocatalytic activity for overall water splitting rather than only for hydrogen evolution (HE), which is superior to those of the conventional plasmonic Au/TiO₂ photocatalysts. The synergistic effects of the high Schottky barrier at the Pt–TiO₂-HA interface, which induces the stronger reduction ability of hot electrons, and intrinsic Pt catalytic activity are responsible for the exceptional photocatalytic performance of Pt/TiO₂-HA and simplify the composition of plasmonic photocatalysts.

Ferrihydrite-Modified Ti-Fe2 O3 as an Effective Photoanode: The Role of Interface Interactions in Enhancing the Photocatalytic Activity of Water Oxidation

Semiconductor electrodes integrated with cocatalysts are key components of photoelectrochemistry (PEC)-based solar-energy conversion. However, efforts to optimize the PEC device have been limited by an inadequate understanding of the interface interactions between the semiconductor-cocatalyst (sem|cat) and cocatalyst-electrolyte (cat|ele) interface. In our work, we used ferrihydrite (Fh)-modified Ti-Fe₂ O₃ as a model to explore the transfer process of photogenerated charge carriers between the Ti-Fe₂ O₃ -Fh (Ti-Fe₂ O₃ |Fh) interface and Fh-electrolyte (Fh|ele) interface. The results demonstrate that the biphasic structure (Fh/Ti-Fe₂ O₃ ) possesses the advantage that the minority hole transfer from Ti-Fe₂ O₃ to Fh is driven by the interfacial electric field at the Ti-Fe₂ O₃ |Fh interface; meanwhile, the holes reached at the surface of Fh can rapidly inject into the electrolyte across the Fh|ele interface. As a benefit from the improved charge transfer at the Ti-Fe₂ O₃ |Fh and Fh|ele interface, the photocurrent density obtained by Fh/Ti-Fe₂ O₃ can reach 2.32 mA cm^-2 at 1.23 V versus RHE, which is three times higher than that of Ti-Fe₂ O₃ .

Template-Guided Programmable Janus Heteronanostructure Arrays for Efficient Plasmonic Photocatalysis

Janus heteronanostructures (HNs), as an important class of anisotropic nanomaterials, could facilitate synergistic coupling of diverse functions inherited by their comprised nanocomponents. Nowadays, synthesizing deterministically targeted Janus HNs remains a challenge. Here, a general yet scalable technique is utilized to fabricate an array of programmable Janus HNs based on anodic aluminum oxide binary-pore templates. By designing and employing an overetching process to partially expose four-edges of one set of nanocomponents in a binary-pore template, selective deposition and interfacing of the other set of nanocomponents is successfully achieved along the exposed four-edges to form a densely packed array of Janus HNs on a large scale. In combination with an upgraded two-step anodization, the synthesis provides high degrees of freedom for both nanocomponents of the Janus HNs, including morphologies, compositions, dimensions, and interfacial junctions. Arrays of TiO₂-Au and TiO₂/Pt NPs-Au Janus HNs are designed, fabricated, and demonstrated about 2.2 times photocurrent density and 4.6 times H₂ evolution rate of that obtained from their TiO₂ counterparts. The enhancement was mainly determined as a result of localized surface plasmon resonance induced direct hot electron injection and strong plasmon resonance energy transfer near the interfaces of TiO₂ nanotubes and Au nanorods. This study may represent a promising step forward to pursue customized Janus HNs, leading to novel physicochemical effects and device applications.

Surface, Bulk, and Interface: Rational Design of Hematite Architecture toward Efficient Photo-Electrochemical Water Splitting

Collecting and storing solar energy to hydrogen fuel through a photo-electrochemical (PEC) cell provides a clean and renewable pathway for future energy demands. Having earth-abundance, low biotoxicity, robustness, and an ideal n-type band position, hematite (α-Fe₂ O₃ ), the most common natural form of iron oxide, has occupied the research hotspot for decades. Here, a close look into recent progress of hematite photoanodes for PEC water splitting is provided. Effective approaches are introduced, such as cocatalysts loading and surface passivation layer deposition, to improve the hematite surface reaction in thermodynamics and kinetics. Second, typical methods for enhancing light absorption and accelerating charge transport in hematite bulk are reviewed, concentrating upon doping and nanostructuring. Third, the back contact between hematite and substrate, which affects interface states and electron transfer, is deliberated. In addition, perspectives on the key challenges and future prospects for the development of hematite photoelectrodes for PEC water splitting are given.

Plasmonic metal-semiconductor photocatalysts and photoelectrochemical cells: a review

The incorporation of plasmonic metals into semiconductors is a promising route to improve the performance of photocatalysts and photoelectrochemical cells. This article summarizes the three major mechanisms of plasmonic energy transfer from a metal to a semiconductor, including light scattering/trapping, plasmon-induced resonance energy transfer (PIRET) and hot electron injection (also called direct electron transfer (DET)). It also discusses the rational design of plasmonic metal-semiconductor heterojunctions based on the underlying plasmonic energy transfer mechanisms. Moreover, this article highlights the applications of plasmonic photocatalysts and photoelectrochemical cells in solar water splitting, carbon dioxide reduction and environmental pollutant decomposition.

Plasmonic resonance enhanced photoelectrochemical aptasensors based on g-C3N4/Bi2MoO6

An in-depth exploration associated with localized surface plasmon resonance between g-C₃N₄/Bi₂MoO₆ and gold nanoparticles has been conducted for highly efficient photoelectrochemical aptasensors under ultraviolet and visible light irradiation.

Three-Dimensional Plasmonic Nanostructure Design for Boosting Photoelectrochemical Activity

Plasmonic nanostructures have been widely incorporated into different semiconductor materials to improve solar energy conversion. An important point is how to manipulate the incident light so that more light can be efficiently scattered and absorbed within the semiconductors. Here, by using a tunable three-dimensional Au pillar/truncated-pyramid (PTP) array as a plasmonic coupler, a superior optical absorption of about 95% within a wide wavelength range is demonstrated from an assembled CdS/Au PTP photoanode. Based on incident photon to current efficiency measurements and the corresponding finite difference time domain simulations, it is concluded that the enhancement is mainly attributed to an appropriate spectral complementation between surface plasmon resonance modes and photonic modes in the Au PTP structure over the operational spectrum. Because both of them are wavelength-dependent, the Au PTP profile and CdS thickness are further adjusted to take full advantage of the complementary effect, and subsequently, an angle-independent photocurrent with an enhancement of about 400% was obtained. The designed plasmonic PTP nanostructure of Au is highly robust, and it could be easily extended to other plasmonic metals equipped with semiconductor thin films for photovoltaic and photoelectrochemical cells.

Hot-electron transfer from the semiconductor domain to the metal domain in CdSe@CdS{Au} nano-heterostructures

Semiconductor-metal hybrid nanostructures are recognized as great materials due to their high level of light-induced charge separation, which has direct relevance in photocatalysis and solar energy conversion. To understand the mechanism of charge separation processes, hybrid CdSe@CdS{Au} nano-heterostructures containing Au nanoparticles (NPs) with different sizes were synthesized, and the ultrafast charge-transfer dynamics were monitored using femtosecond transient absorption spectroscopy. Steady-state optical absorption studies suggest the formation of charge-transfer complexes between core shell nanocrystals (NCs) and Au NPs. Steady-state and time-resolved luminescence spectroscopy suggest electron transfer from the photo-excited CdSe@CdS core shell QDs NCs to the Au NPs within the heterostructure. The ultrafast interfacial electron-transfer dynamics in the heterostructures were monitored by femtosecond transient absorption spectroscopy. The results revealed that both hot and thermalized electrons are transferred from the core shell QDs to the metal NPs with time constants of 150 and 300 fs, respectively. Hot-electron transfer from QDs to Au NPs was found to take place predominantly in the heterostructures depending on the sizes of the metal NPs. The photo-degradation of rhodamin B in the presence of the CdSe@CdS{Au} heterostructures under visible-light radiation suggests that the hot electrons in the heterostructures play a major role in photocatalytic degradation.

Catalytically active and chemically inert CdIn2S4 coating on a CdS photoanode for efficient and stable water splitting

Cadmium sulfide was popularly utilized as a light harvesting material for photoelectrochemical (PEC) water splitting, however, the drawback of poor durability limits its practical application. Herein, we show that a catalytically active and chemically inert cadmium indium sulfide (CdIn₂S₄) can improve the stability and even photocurrent of a CdS photoelectrode.

Plasmonically enhanced metal-insulator multistacked photodetectors with separate absorption and collection junctions for near-infrared applications

Plasmonically enhanced metal-insulator-metal (MIM) type structures are popular among perfect absorbers and photodetectors in which the field enhancement (for increased absorption) mechanism is directly coupled with collection (photocurrent) processes. In this work we propose a device structure that decouples absorption and collection parts for independent optimization. Double-stacked MIM (i.e. MIMIM) photodetectors operating in the near-infrared (NIR) spectrum up to 1200 nm wavelength are demonstrated. In the absorbing MIM (at the top side), we have used Silver nanoparticles resulting from dewetting, yielding a very low reflection of 10% for the most part of the 400 to 1000 nm wavelength range. An unconventional plasmonic material, Chromium, exhibits an absorption peak of over 80% at 1000 nm. The complete device has been fabricated and the photo-collection tunneling MIM (at the bottom) suppresses the leakage current by metal workfunction difference. An optimized stack consisting of Silver – Hafnium Oxide – Chromium – Aluminum Oxide – Silver nanoparticles (from bottom to top) yields a dark current of 7 nA and a photoresponsivity peak of 0.962 mA/W at 1000 nm and a full width at half maximum of 300 nm, while applied bias is 50 mV and device areas are 300 μm × 600 μm.

Electron Filtering by an Intervening ZnS Thin Film in the Gold Nanoparticle-Loaded CdS Plasmonic Photocatalyst

In the gold nanoparticle (Au NP)-loaded CdS film on fluorine-doped tin oxide electrode (Au/CdS/FTO), the localized plasmonic resonance excitation-induced electron injection from Au NP to CdS has been proven by photoelectrochemical measurements. Formation of ZnS thin films between the Au NP and CdS film leads to a drastic increase of the photocurrent under visible-light irradiation (λ > 610 nm) in a 0.1 M NaClO₄ aqueous electrolyte solution due to the electron filtering effect. The photocurrent strongly depends on the thickness of the ZnS film, and the maximum value is obtained at a thickness as thin as 2.1 nm. Furthermore, the ZnS overlayer significantly stabilizes the photocurrent of the CdS/FTO electrode in a polysulfide/sulfide electrolyte solution even under the excitation of CdS (λ > 430 nm). This work presents important information about the design for new plasmonic photocatalysts consisting of plasmonic metal NPs and chalcogenide semiconductors with high conduction band edge.

Plasmon enhanced light absorption in aluminium@Hematite core shell hybrid nanocylinders: the critical role of length

The absorbed photon flux in cylindrical α-Fe₂O₃ shells can be enhanced by filling it with an Al core and tailoring its length.

Fabrication of arrayed triangular micro-cavities for SERS substrates using the force modulated indention process

Based on the tip-based continuous indentation process, a novel method for the fabrication of periodic arrayed triangular micro-cavities on copper (Cu) surface is presented as SERS substrates.

Photostability and visible-light-driven photoactivity enhancement of hierarchical ZnS nanoparticles: The role of embedment of stable defect sites on the catalyst surface with the assistant of ultrasonic waves

Zinc sulfide is a UV-active photocatalyst and it undergoes photocorrosion under light irradiation. In this work, the defect sites on ZnS nanoparticles (NPs) surfaces were induced with the help of powerful ultrasonic waves. The defect sites caused (1) suppression of photocorrosion in a large extent under UV light irradiation and (2) enhancement of visible light photo activity. The photocorrosion inhibition was induced by raising valence band (VB) position through the formation of interstitial zinc and sulfur vacancy states in the ZnS band structure and weakening of oxidative capacity of hole. The enhancement of visible light photocatalytic activity may be related to the generation of more defect energy states in the ZnS band gap. Under visible light irradiation, the electron was excited from the ZnS VB to the interstitial sulfur and zinc vacancy states before injecting into the conduction band of ZnS. Therefore, we modified the band gap of ZnS so that it acts as a visible light active photocatalyst. ZnS NPs were prepared using two different classical and ultrasound methods. The prepared ZnS using ultrasound method, exhibited more outstanding photocatalytic activity for degrading reactive black 5 (RB5) under UV and sunlight irradiation in comparison with the classical method. Details of the degradation mechanism under UV light were investigated. This work provides new insights to understanding the photocorrosion stability and visible light activity of bare ZnS photocatalyst.

Photoanodes based on TiO2and α-Fe2O3for solar water splitting – superior role of 1D nanoarchitectures and of combined heterostructures

Solar driven photoelectrochemical water splitting represents a promising approach for a sustainable and environmentally friendly production of renewable energy vectors and fuel sources, such as H₂.

Heterostructured Au NPs/CdS/LaBTC MOFs Photoanode for Efficient Photoelectrochemical Water Splitting: Stability Enhancement via CdSe QDs to 2D-CdS Nanosheets Transformation

The electrochemical stability of MOFs in aqueous medium is most essential for MOFs based electrocatalysts for hydrogen production via water splitting. Since most MOFs suffer from instability issues in aqueous systems, there is enormous demand for electrochemically stable MOFs catalysts. Herein, we have developed a simple postsynthesis surface modification protocol for La (1,3,5-BTC) (H2O)6 metal-organic frameworks (LaBTC MOFs) using Mercaptopropionic acid (MPA), to attain electrochemical stability in aqueous mediums. The MPA treated LaBTC MOFs exhibited better stability than the bare LaBTC. Further, to facilitate light harvesting properties of LaBTC MOFs, Au nanoparticles (NPs) and CdSe quantum dots (QDs) are functionalized on LaBTC. The sensitization of LaBTC with Au NPs and CdSe QDs enhances the light harvesting properties of LaBTC in the visible region of solar spectrum. Using as a photoanode, the electrode generates the current density of ∼80 mA/cm(2) at 0.8 V (vs Ag/AgCl) during photoelectrochemical water splitting. The heterostructured LaBTC photoanode demonstrates the long-term stability for the period of 10 h. The electrode post-mortem analysis confirms the conversion of CdSe QDs into single crystalline 2D-CdS nanosheets. The present investigation reveals that CdS nanosheets together with SPR Au NPs improve the photoelectrochemical water splitting activity and stability of LaBTC MOFs.