Cell behaviors on polysaccharide-wrapped single-wall carbon nanotubes: a quantitative study of the surface properties of biomimetic nanofibrous scaffolds

Biomaterial-based strategies: a new era in spinal cord injury treatment

Enhancing neurological recovery and improving the prognosis of spinal cord injury have gained research attention recently. Spinal cord injury is associated with a complex molecular and cellular microenvironment. This complexity has prompted researchers to elucidate the underlying pathophysiological mechanisms and changes and to identify effective treatment strategies. Traditional approaches for spinal cord injury repair include surgery, oral or intravenous medications, and administration of neurotrophic factors; however, the efficacy of these approaches remains inconclusive, and serious adverse reactions continue to be a concern. With advancements in tissue engineering and regenerative medicine, emerging strategies for spinal cord injury repair now involve nanoparticle-based nanodelivery systems, scaffolds, and functional recovery techniques that incorporate biomaterials, bioengineering, stem cell, and growth factors as well as three-dimensional bioprinting. Ideal biomaterial scaffolds should not only provide structural support for neuron migration, adhesion, proliferation, and differentiation but also mimic the mechanical properties of natural spinal cord tissue. Additionally, these scaffolds should facilitate axon growth and neurogenesis by offering adjustable topography and a range of physical and biochemical cues. The three-dimensionally interconnected porous structure and appropriate physicochemical properties enabled by three-dimensional biomimetic printing technology can maximize the potential of biomaterials used for treating spinal cord injury. Therefore, correct selection and application of scaffolds, coupled with successful clinical translation, represent promising clinical objectives to enhance the treatment efficacy for and prognosis of spinal cord injury. This review elucidates the key mechanisms underlying the occurrence of spinal cord injury and regeneration post-injury, including neuroinflammation, oxidative stress, axon regeneration, and angiogenesis. This review also briefly discusses the critical role of nanodelivery systems used for repair and regeneration of injured spinal cord, highlighting the influence of nanoparticles and the factors that affect delivery efficiency. Finally, this review highlights tissue engineering strategies and the application of biomaterial scaffolds for the treatment of spinal cord injury. It discusses various types of scaffolds, their integrations with stem cells or growth factors, and approaches for optimization of scaffold design.

Hybrid fibrous architectures-mediated gene transfer by pDNA nanoparticles into macrophages

Gene therapy is one of the most potential therapeutic approaches in direct and specific regulation of biological functions of macrophages at the gene level for efficient cell therapy. However, the delivery of genetic material to macrophages is extremely challenging, because of low stability, specificity and inability of therapeutic genes to efficiently enter the cells. Here, we present a method that uses the hybrid electrospun architectures based on gelatin-alginate decorated with carboxylated graphene oxide (HAG/G) as efficient substrate for loading and in vitro local and controlled delivery of plasmid DNA (pDNA) to macrophages as an alternative to systemic gene delivery carriers. Polyethyleneimine (PEI) is employed to assemble PEI/pDNA nanoparticles (Np) - used as model of carrier. The dispersion of GO-COOH sheets shifts the surface zeta potential of HAG/G to high negative value (SZP = -16.8 ± 2.21 mV) and further increases the encapsulation efficiency of PEI/pDNA Np onto hybrid HAG/G electrospun architectures to ∼ 69 % (HAG/G-Np). The in vitro biological investigations show a good metabolic activity of macrophages seeded onto HAG/G-Np (MTT assay), while gene expression experiments (fluorescent microscopy) show a 30 % increase in transient gene transfection of cells cultured in the presence of HAG/G-Np as compared to those incubated with free PEI/pDNA Np.

Choice of Protein, Not Its Amyloid-Fold, Determines the Success of Amyloid-Based Scaffolds for Cartilage Tissue Regeneration

The formation of fibrocartilage during articular cartilage regeneration remains a clinical problem affecting adequate restoration of articular cartilage in joints. To stimulate chondrocytes to form articular cartilage, we investigated the use of amyloid fibril-based scaffolds. The proteins α-synuclein, β-lactoglobulin, and lysozyme were induced to self-assemble into amyloid fibrils and, during dialysis, formed micrometer scale amyloid networks that resemble the cartilage extracellular matrix. Our results show that lysozyme amyloid micronetworks supported chondrocyte viability and extracellular matrix deposition, while α-synuclein and β-lactoglobulin maintained cell viability. With this study, we not only confirm the possible use of amyloid materials for tissue regeneration but also demonstrate that the choice of protein, rather than its amyloid-fold per se, affects the cellular response and tissue formation.

3D Porous Scaffold-Based High-Throughput Platform for Cancer Drug Screening

Natural polymer-based porous scaffolds have been investigated to serve as three-dimensional (3D) tumor models for drug screening owing to their structural properties with better resemblance to human tumor microenvironments than two-dimensional (2D) cell cultures. In this study, a 3D chitosan-hyaluronic acid (CHA) composite porous scaffold with tunable pore size (60, 120 and 180 µm) was produced by freeze-drying and fabricated into a 96-array platform for high-throughput screening (HTS) of cancer therapeutics. We adopted a self-designed rapid dispensing system to handle the highly viscous CHA polymer mixture and achieved a fast and cost-effective large-batch production of the 3D HTS platform. In addition, the adjustable pore size of the scaffold can accommodate cancer cells from different sources to better mimic the in vivo malignancy. Three human glioblastoma multiforme (GBM) cell lines were tested on the scaffolds to reveal the influence of pore size on cell growth kinetics, tumor spheroid morphology, gene expression and dose-dependent drug response. Our results showed that the three GBM cell lines showed different trends of drug resistance on CHA scaffolds of varying pore size, which reflects the intertumoral heterogeneity across patients in clinical practice. Our results also demonstrated the necessity to have a tunable 3D porous scaffold for adapting the heterogeneous tumor to generate the optimal HTS outcomes. It was also found that CHA scaffolds can produce a uniform cellular response (CV < 0.15) and a wide drug screening window (Z' > 0.5) on par with commercialized tissue culture plates, and therefore, can serve as a qualified HTS platform. This CHA scaffold-based HTS platform may provide an improved alternative to traditional 2D-cell-based HTS for future cancer study and novel drug discovery.

Alginate-Based Hydrogel as Delivery System for Therapeutic Bacterial RNase

To deliver therapeutic proteins into a living body, it is important to maintain their target activity in the gastrointestinal tract after oral administration. Secreted ribonuclease from Bacillus pumilus (binase) has antitumor and antiviral activity, which makes it a promising therapeutic agent. This globular protein of small molecular weight (12.2 kDa) is considered as a potential agent that induces apoptosis of tumor cells expressing certain oncogenes, including colorectal and duodenum cancer. The most important problem of its usage is the preservation of its structure and target activity, which could be lost during oral administration. Here, we developed alginate microspheres reinforced with divalent cations and analyzed the enzyme release from them. Using methods of scanning electron microscopy, measurements of fluorescence, enzyme catalytic activity, and determination of viability of the duodenum adenocarcinoma tumor cell line, we characterized obtained microspheres and chose calcium as a biogenic ion-strengthening microsphere structure. Among such modified additivities as beta-casein, gelatin, and carbon nanotubes introduced into microspheres, only gelatin showed a pronounced increase in their stability and provided data on the prolonged action of enzyme release from microspheres into tumor cell culture medium during 48 h in an amount of about 70% of the loaded quantity.

Graphene and carbon nanotubes interfaced electrochemical nanobiosensors for the detection of SARS-CoV-2 (COVID-19) and other respiratory viral infections: A review

Recent COVID-19 pandemic has claimed millions of lives due to lack of a rapid diagnostic tool. Global scientific community is now making joint efforts on developing rapid and accurate diagnostic tools for early detection of viral infections to preventing future outbreaks. Conventional diagnostic methods for virus detection are expensive and time consuming. There is an immediate requirement for a sensitive, reliable, rapid and easy-to-use Point-of-Care (PoC) diagnostic technology. Electrochemical biosensors have the potential to fulfill these requirements, but they are less sensitive for sensing viruses/viral infections. However, sensitivity and performance of these electrochemical platforms can be improved by integrating carbon nanostructure, such as graphene and carbon nanotubes (CNTs). These nanostructures offer excellent electrical property, biocompatibility, chemical stability, mechanical strength and, large surface area that are most desired in developing PoC diagnostic tools for detecting viral infections with speed, sensitivity, and cost-effectiveness. This review summarizes recent advancements made toward integrating graphene/CNTs nanostructures and their surface modifications useful for developing new generation of electrochemical nanobiosensors for detecting viral infections. The review also provides prospects and considerations for extending the graphene/CNTs based electrochemical transducers into portable and wearable PoC tools that can be useful in preventing future outbreaks and pandemics.

Polysaccharide-Based Biomaterials in Tissue Engineering: A Review

In addition to proteins and nucleic acids, polysaccharides are an important type of biomacromolecule widely distributed in plants, animals, and microorganisms. Polysaccharides are considered as promising biomaterials due to their significant bioactivities, natural abundance, immunoactivity, and chemical modifiability for tissue engineering (TE) applications. Due to the similarities of the biochemical properties of polysaccharides and the extracellular matrix of human bodies, polysaccharides are increasingly recognized and accepted. Furthermore, the degradation behavior of these macromolecules is generally nontoxic. Certain delicate properties, such as remarkable mechanical properties and tunable tissue response, can be obtained by modifying the functional groups on the surface of polysaccharide molecules. The applications of polysaccharide-based biomaterials in the TE field have been growing intensively in recent decades, for example, bone/cartilage regeneration, cardiac regeneration, neural regeneration, and skin regeneration. This review summarizes the main essential properties of polysaccharides, including their chemical properties, crosslinking mechanisms, and biological properties, and focuses on the association between their structures and properties. The recent progress in polysaccharide-based biomaterials in various TE applications is reviewed, and the prospects for future studies are addressed as well. We intend this review to offer a comprehensive understanding of and inspiration for the research and development of polysaccharide-based materials in TE.

Non-Covalent Functionalization of Carbon Nanotubes for Electrochemical Biosensor Development

Carbon nanotubes (CNTs) have been widely studied and used for the construction of electrochemical biosensors owing to their small size, cylindrical shape, large surface-to-volume ratio, high conductivity and good biocompatibility. In electrochemical biosensors, CNTs serve a dual purpose: they act as immobilization support for biomolecules as well as provide the necessary electrical conductivity for electrochemical transduction. The ability of a recognition molecule to detect the analyte is highly dependent on the type of immobilization used for the attachment of the biomolecule to the CNT surface, a process also known as biofunctionalization. A variety of biofunctionalization methods have been studied and reported including physical adsorption, covalent cross-linking, polymer encapsulation etc. Each method carries its own advantages and limitations. In this review we provide a comprehensive review of non-covalent functionalization of carbon nanotubes with a variety of biomolecules for the development of electrochemical biosensors. This method of immobilization is increasingly being used in bioelectrode development using enzymes for biosensor and biofuel cell applications.

Quantum dots modified with quaternized poly(dimethylaminoethyl methacrylate) for selective recognition and killing of bacteria over mammalian cells

Copper-free click chemistry has been used to graft quaternized poly(dimethylaminoethyl methacrylate) (QPA) modified with azide to the quantum dots (QDs) derived with dibenzocyclooctynes (DBCO). The success of the quaternary ammonium polymer-modified QDs was confirmed by ultraviolet-visible spectrophotometry (UV-Vis), fluorescence spectroscopy, zeta (ζ) potential, size distribution, and transmission electron microscopy (TEM). The QPA-modified QDs exhibited properties of selective recognition and killing of bacteria. The novelty of this study lies in fact that the synthesis method of the antimicrobial QPA-modified QDs is simple. Moreover, from another standpoint, QPA-modified QDs simultaneously possess abilities of selective recognition and killing of bacteria over mammalian cells, which is very different from the currently designed multifunctional antimicrobial systems composed of complicated systematic compositions.

Self-Assembly of Rod-Coil Block Copolymers on Carbon Nanotubes: A Route toward Diverse Surface Nanostructures

In this work, it is reported that poly(γ-benzyl-l-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) rod-coil block copolymers (BCPs) can disperse carbon nanotubes (CNTs) in solution and form various surface nanostructures on the CNTs via solution self-assembly. In an organic solvent that dissolves the BCPs, the PBLG rod blocks adsorb on CNT surfaces, and the BCPs form conformal coatings. Then, by the introduction of water, a selective solvent for PEG blocks, the BCPs in the coatings further self-assemble into diverse surface nanostructures, such as helices (left-handed or right-handed), gyros, spheres, and rings. The morphology of the surface nanostructure can be tailored by initial organic solvent composition, preparation temperature, feeding ratio of BCPs to CNTs, degree of polymerization of PBLG blocks, and diameter of the CNTs.

Polymer coated liposomes for use in the oral cavity - a study of the in vitro toxicity, effect on cell permeability and interaction with mucin

In this study we investigated the in vitro toxicity, impact on cell permeability and mucoadhesive potential of polymer-coated liposomes intended for use in the oral cavity. A TR146 cell line was used as a model. The overall aim was to end up with a selection of safe polymer coated liposomes with promising mucoadhesive properties for drug delivery to the oral cavity. The following polymers were tested: chitosan, low-methoxylated pectin (LM-pectin), high-methoxylated pectin (HM-pectin), amidated pectin (AM-pectin), Eudragit, poly(N-isopropylacrylamide-co-methacrylic acid) (p(NIPAAM-co-MAA)), hydrophobically modified hydroxyethyl cellulose (HM-HEC), and hydrophobically modified ethyl hydroxyethyl cellulose (HM-EHEC). With chitosan as an exception, all the systems exhibited no significant effect on cell viability and permeability at the considered concentrations. Additionally, all the formulations showed to a varying degree an interaction with mucin (BSM type I-S); the positively charged formulations exhibited the strongest interaction, while the negatively and neutrally charged formulations displayed a moderate or low interaction. The ability to interact with mucin makes all the liposomal formulations promising for oromucosal administration. Although the chitosan-coated liposomes affected the cell viability, this formulation also influenced the cell permeability, which makes it an interesting candidate for systemic drug delivery from the oral cavity.

Controlling mesenchymal stem cells differentiate into contractile smooth muscle cells on a TiO2 micro/nano interface: Towards benign pericytes environment for endothelialization

Building healthy and oriented smooth muscle cells (SMCs) environment is an effective method for improving the surface endothelialization of the cardiovascular implants. However, a long-term and stable source of SMCs for implantation without immune rejection and inflammation has not been solved, and mesenchymal stem cells (MSCs) differentiation may be a good choice. In this work, two types of TiO2 micro/nano interfaces were fabricated on titanium surface by photolithography and anodic oxidation. These TiO2 micro/nano interfaces were used to regulate the differentiation of the MSCs. The X-ray diffraction (XRD) detection showed that the TiO2 micro/nano interfaces possessed the anatase crystal structure, suggesting good cytocompatibility. The CCK-8 results indicated the TiO2 micro/nano interfaces improved MSC proliferation, further immunofluorescence staining and calculation of the cell morphology index proved the micro/nano surfaces also elongated MSCs and regulated MSCs oriented growth. The specific staining of α-SMA, CNN-1, vWF, CD44 and CD133 markers revealed that the micro/nano surfaces induced MSCs differentiation to contractile SMCs, and the endothelial cells (ECs) culture experiment indicated that the MSCs induced by micro/nano interfaces contributed to the ECs attachment and proliferation. This method will be further studied and applied for the surface modification of the cardiovascular implants.

Anionic complexes of MWCNT with supergiant cyanobacterial polyanions

Multi-walled carbon nanotubes (MWCNTs) were well dispersed in an aqueous solution of the cyanobacterial polysaccharide, sacran, with an ultra-high molecular weight >10 million g/mol. MWCNTs powder was put into aqueous solutions of various polysaccharides including sacran and was dispersed under sonication. As a result of the turbidity measurement of the supernatant, it was found that sacran showed the highest MWCNT-dispersion efficiency of all the polysaccharides used here. Cryogenic transmission electron microscopic (Cryo-TEM) studies directly demonstrated the existence of MWCNTs in the supernatant, and high-resolution TEM observation revealed that MWCNTs covered by sacran chains made their efficient dispersion in water. Raman spectroscopy demonstrated the existence of MWCNT in dried sample from supernatant and the interaction between MWCNT and sacran. The ζ-potential measurement of the dispersion indicated the negative surface charges of the sacran/MWCNT complexes. Then the MWCNT complexes were able to fabricate by ionic interaction; electrophoresis of the anionic complex formed the sacran/MWCNT gels on the anode while the droplet of sacran/MWCNT dispersion formed gel beads in the presence of the lanthanoid cations.

Enzymatic formation of carbohydrate rings catalyzed by single-walled carbon nanotubes

Macrocyclic carbohydrate rings were formed via enzymatic reactions around single-walled carbon nanotubes (SWNTs) as a catalyst. Cyclodextrin glucanotransferase, starch substrate and SWNTs were reacted in buffer solution to yield cyclodextrin (CD) rings wrapped around individual SWNTs. Atomic force microscopy showed the resulting complexes to be rings of 12-50 nm in diameter, which were highly soluble and dispersed in aqueous solution. They were further characterized by Raman and Fourier transform infrared spectroscopy and molecular simulation using density functional theory calculation. In the absence of SWNT, hydrogen bonding between glucose units determines the structure of maltose (the precursor of CD) and produces the curvature along the glucose chain. Wrapping SWNT along the short axis was preferred with curvature in the presence of SWNTs and with the hydrophobic interactions between the SWNTs and CD molecules. This synthetic approach may be useful for the functionalization of carbon nanotubes for development of nanostructures.

Click synthesis of quaternized poly(dimethylaminoethyl methacrylate) functionalized graphene oxide with improved antibacterial and antifouling ability

A quaternized poly(dimethylaminoethyl methacrylate) functionalized graphene oxide (GO-QPDMAEMA) was successfully prepared in this study via click chemistry. Alkyne-functionalized graphene oxide (GO-alkyne) was first synthesized through a two-step amidation reaction of GO-COOH. Meanwhile, azide-terminated poly(dimethylaminoethyl methacrylate) (PDMAEMA-N3) was prepared via the atom-transfer radical-polymerization of dimethylaminoethyl methacrylate (DMAEMA). Subsequently, PDMAEMA-N3 was grafted onto the GO-alkyne through click chemistry to obtain PDMAEMA modified graphene oxide (GO-PDMAEMA). Finally, the tertiary amino groups of GO-PDMAEMA were quaternized by ethyl bromide to provide a quaternized poly(dimethylaminoethyl methacrylate) functionalized graphene oxide (GO-QPDMAEMA). Various characterization techniques, including Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, UV-vis spectrometry, ζ potential, Raman, contact angle analyses and field emission scanning electron microscope were used to ascertain the successful preparation of the quaternized GO-QPDMAEMA. Furthermore, antibacterial and antifouling activities of GO-QPDMAEMA were investigated via protein adsorption, as well as bacterial and cell adhesion studies. The results suggest that the GO-QPDMAEMA surface exhibited significant antibacterial and antifouling properties, compared with the GO-COOH and GO-PDMAEMA surfaces.

A visualized method for Cu2+ ion detection by self-assembling azide functionalized free graphene oxide using click chemistry

We report a visualized method for the detection of Cu²⁺ ions by self-assembling azide functionalized graphene oxide using click chemistry.

Multiwalled carbon nanotube reinforced biomimetic bundled gel fibres

Biomimetic bundled fibre: Multiwalled carbon nanotube (MWCNT) reinforced bundled gel fibre is reported to obtain a cell culture scaffold with enhanced mechanical and electrical properties.

Pd(II)-Directed Encapsulation of Hydrogenase within the Layer-by-Layer Multilayers of Carbon Nanotube Polyelectrolyte Used as a Heterogeneous Catalyst for Oxidation of Hydrogen

A metal-directed assembling approach has been developed to encapsulate hydrogenase (H2ase) within a layer-by-layer (LBL) multilayer of carbon nanotube polyelectrolyte (MWNT-PVPMe), which showed efficient biocatalytic oxidation of H2 gas. The MWNT-PVPMe was prepared via a diazonium process and addition reactions with poly(4-vinylpyridine) (PVP) and methyl iodide (MeI). The covalently attached polymers and organic substituents in the polyelectrolyte comprised 60-70% of the total weight. The polyelectrolyte was then used as a substrate for H2ase binding to produce MWNT-PVPMe@H2ase bionanocomposites. X-ray photoelectron spectra revealed that the bionanocomposites included the elements of Br, S, C, N, O, I, Fe, and Ni, which confirmed that they were composed of MWNT-PVPMe and H2ase. Field emission transmission electron microscope images revealed that the H2ase was adsorbed on the surface of MWNT-PVPMe with the domains ranging from 20 to 40 nm. Further, with the use of the bionanocomposites as nanolinkers and Na2PdCl4 as connectors, the (Pd/MWNT-PVPMe@H2ase)n multilayers were constructed on the quartz and gold substrate surfaces by the Pd(II)-directed LBL assembling technique. Finally, the as-prepared LBL multilayers were used as heterogeneous catalysts for hydrogen oxidation with methyl viologen (MV(2+)) as an electron carrier. The dynamic processes for the reversible color change between blue-colored MV(+) and colorless MV(2+) (catalyzed by the LBL multilayers) were video recorded, which confirmed that the H2ase encapsulated within the present LBL multilayers was of much stronger stability and higher biocatalytic activity of H2 oxidation resulting in potential applications for the development of H2 biosensors and fuel cells.

Non-covalent polymer wrapping of carbon nanotubes and the role of wrapped polymers as functional dispersants

Carbon nanotubes (CNTs) have been recognized as a promising material in a wide range of applications from biotechnology to energy-related devices. However, the poor solubility in aqueous and organic solvents hindered the applications of CNTs. As studies have progressed, the methodology for CNT dispersion was established. In this methodology, the key issue is to covalently or non-covalently functionalize the surfaces of the CNTs with a dispersant. Among the various types of dispersions, polymer wrapping through non-covalent interactions is attractive in terms of the stability and homogeneity of the functionalization. Recently, by taking advantage of their stability, the wrapped-polymers have been utilized to support and/or reinforce the unique functionality of the CNTs, leading to the development of high-performance devices. In this review, various polymer wrapping approaches, together with the applications of the polymer-wrapped CNTs, are summarized.

Controlled release and targeted delivery to cancer cells of doxorubicin from polysaccharide-functionalised single-walled carbon nanotubes

Carboxyl single-walled carbon nanotubes (SWNTs) were used to construct an innovative drug delivery system by modification with chitosan (CHI) to enhance water solubility and biocompatibility.

The effect of hyaluronic acid functionalized carbon nanotubes loaded with salinomycin on gastric cancer stem cells

Gastric cancer stem cells (CSCs) play a crucial role in the initiation, development, relapse and metastasis of gastric cancer because they are resistant to a standard chemotherapy and the residual CSCs are able to proliferate indefinitely. Therefore, eradication of this cell population is a primary objective in gastric cancer therapy. Here, we report a gastric CSCs-specifically targeting drug delivery system (SAL-SWNT-CHI-HA complexes) based on chitosan(CHI) coated single wall carbon nanotubes (SWNTs) loaded with salinomycin (SAL) functionalized with hyaluronic acid (HA) can selectively eliminate gastric CSCs. Gastric CSCs were identified as CD44+ cells and cultured in serum-free medium. SAL-SWNT-CHI-HA complexes were capable of inhibiting the self-renewal capacity of CD44+ population, and decrease mammosphere- and colon-formation of CSCs. In addition, the migration and invasion of gastric CSCs were significantly blocked by SAL-SWNT-CHI-HA complexes. Quantitative and qualitative analysis of cellular uptake demonstrated that HA functionalization facilitated the uptake of SWNTs in gastric CSCs while free HA competitively inhibited cellular uptake of SAL-SWNT-CHI-HA delivery system, revealing the mechanism of CD44 receptor-mediated endocytosis. The SAL-SWNT-CHI-HA complexes showed the strongest antitumor efficacy in gastric CSCs by inducing apoptosis, and in CSCs mammospheres by penetrating deeply into the core. Taken altogether, our studies demonstrated that this gastric CSCs-targeted SAL-SWNT-CHI-HA complexes would provide a potential strategy to selectively target and efficiently eradicate gastric CSCs, which is promising to overcome the recurrence and metastasis of gastric cancer and improve gastric cancer treatment.

Golden single-walled carbon nanotubes prepared using double layer polysaccharides bridge for photothermal therapy

Golden single-walled carbon nanotubes (SWNTs) were prepared by growing gold nanoparticles onto the bilayer polysaccharide functionalized SWNTs. The layer-by-layer self-assembly of sodium alginate and chitosan on SWNTs provided an ideal surface with high density of active metal-binding groups such as amino and carboxylic acid groups, and then an approach of seed growth was adopted to facilitate the formation of gold nanoparticles coated SWNTs. The resulting golden SWNT hybrids have good water dispersibility and biocompatibility and tend to enter cancer cells. Interestingly, they have an enhanced NIR absorption and effectively transfer NIR laser into heat. The material can quickly cause localized hyperthermia, resulting in rapid cell death, and therefore appears to act as a highly effective photothermal converter for cancer ablation.

Carbon nanotubes hybrid hydrogels in drug delivery: a perspective review

The use of biologics, polymers, silicon materials, carbon materials, and metals has been proposed for the preparation of innovative drug delivery devices. One of the most promising materials in this field are the carbon-nanotubes composites and hybrid materials coupling the advantages of polymers (biocompatibility and biodegradability) with those of carbon nanotubes (cellular uptake, stability, electromagnatic, and magnetic behavior). The applicability of polymer-carbon nanotubes composites in drug delivery, with particular attention to the controlled release by composites hydrogel, is being extensively investigated in the present review.

Are carbon nanotubes a natural solution? Applications in biology and medicine

Carbon nanotubes and materials based on carbon nanotubes have many perceived applications in the field of biomedicine. Several highly promising examples have been highlighted in the literature, ranging from their use as growth substrates or tissue scaffolds to acting as intracellular transporters for various therapeutic and diagnostic agents. In addition, carbon nanotubes have a strong optical absorption in the near-infrared region (in which tissue is transparent), which enables their use for biological imaging applications and photothermal ablation of tumors. Although these advances are potentially game-changing, excitement must be tempered somewhat as several bottlenecks exist. Carbon nanotube-based technologies ultimately have to compete with and out-perform existing technologies in terms of performance and price. Moreover, issues have been highlighted relating to toxicity, which presents an obstacle for the transition from preclinical to clinical use. Although many studies have suggested that well-functionalized carbon nanotubes appear to be safe to the treated animals, mainly rodents, long-term toxicity issues remains to be elucidated. In this report, we systematically highlight some of the most promising biomedical application areas of carbon nanotubes and review the interaction of carbon nanotubes with cultured cells and living organisms with a particular focus on in vivo biodistribution and potential adverse health effects. To conclude, future challenges and prospects of carbon nanotubes for biomedical applications will be addressed.

Multiwalled carbon nanotubes display microtubule biomimetic properties in vivo, enhancing microtubule assembly and stabilization

Microtubules are hollow protein cylinders of 25 nm diameter which are implicated in cytokinetics and proliferation in all eukaryotic cells. Here we demonstrate in vivo how multiwalled carbon nanotubes (MWCNTs) interact with microtubules in human cancer cells (HeLa) blocking mitosis and leading to cell death by apoptosis. Our data suggest that, inside the cells, MWCNTs display microtubule biomimetic properties, assisting and enhancing noncentrosomal microtubule polymerization and stabilization. These features might be useful for developing a revolutionary generation of chemotherapeutic agents based on nanomaterials.

Edge effects control helical wrapping of carbon nanotubes by polysaccharides

Carbon nanotubes (CNTs) wrapped by polysaccharide chains via noncovalent interactions have been shown to be soluble and dispersed in aqueous environments, and have several potential chemical and biomedical applications. The wrapping mechanism, in particular the role played by the end of the CNT, remains, however, unknown. In this work, a hybrid complex formed by an amylose (AMYL) chain and a single-walled carbon nanotube (SWNT) has been examined by means of atomistic molecular dynamics (MD) simulations to assess its propensity toward self-assembly, alongside its structural characteristics in water. To explore edge effects, the middle and end regions of the SWNT have been chosen as two initial wrapping sites, to which two relative orientations have been assigned, i.e. parallel and orthogonal. The present results prove that AMYL can wrap spontaneously around the tubular surface, starting from the end of the SWNT and driven by both favorable van der Waals attraction and hydrophobic interactions, and resulting in a perfectly compact, helical conformation stabilized by an interlaced hydrogen-bond network. Principal component analysis carried out over the MD trajectories reveals that stepwise burial of hydrophobic faces of pyranose rings controlled by hydrophobic interactions is a key step in the formation of the helix. Conversely, if wrapping proceeds from the middle of the SWNT, self-organization into a helical structure is not observed due to strong van der Waals attractions preventing the hydrophobic faces of the AMYL chain generating enough contacts with the tubular surface.

EGF-functionalized single-walled carbon nanotubes for targeting delivery of etoposide

To enhance the therapeutic potential of etoposide (ETO), we devised a targeted drug delivery system (TDDS) of epidermal growth factor-chitosan-carboxyl single-walled carbon nanotubes-ETO (EGF/CHI/SWNT-COOHs/ETO) using modified SWNTs (m-SWNTs) as the carrier, EGF-functionalized SWNTs (f-SWNTs) as the targeted moiety and ETO as the drug. After SWNT-COOHs were conjugated with CHI (CHI/SWNT-COOHs/ETO), they displayed high solubility and stable dispersion in aqueous solution. The drug loading capacity was approximately 25-27%. The m-SWNTs and f-SWNTs had only slight cytotoxicity. ETO was released from EGF/CHI/SWNT-COOHs/ETO at low pH and taken up by tumour cells via adenosine triphosphate (ATP)-dependent endocytosis. The cell death induced by EGF/CHI/SWNT-COOHs/ETO was as much as 2.7 times that due to ETO alone. In summary, these results demonstrated that our TDDS had a greater anticancer effect than free ETO in vitro.

Surface patterning of carbon nanotubes can enhance their penetration through a phospholipid bilayer

Nanotube patterning may occur naturally upon the spontaneous self-assembly of biomolecules onto the surface of single-walled carbon nanotubes (SWNTs). It results in periodically alternating bands of surface properties, ranging from relatively hydrophilic to hydrophobic, along the axis of the nanotube. Single-chain mean field (SCMF) theory has been used to estimate the free energy of systems in which a surface patterned nanotube penetrates a phospholipid bilayer. In contrast to unpatterned nanotubes with uniform surface properties, certain patterned nanotubes have been identified that display a relatively low and approximately constant system free energy (<±10 kT) as the nanotube traverses through the bilayer. These observations support the hypothesis that the spontaneous self-assembly of biomolecules on the surface of SWNTs may facilitate nanotube transduction through cell membranes.

Green fabrication of agar-conjugated Fe3O4 magnetic nanoparticles

Magnetic nanoparticles are of great interest both for fundamental research and emerging applications. In the biomedical field, magnetite (Fe(3)O(4)) has shown promise as a hyperthermia-based tumor therapeutic. However, preparing suitable solubilized magnetite nanoparticles is challenging, primarily due to aggregation and poor biocompatibility. Thus methods for coating Fe(3)O(4) NPs with biocompatible stabilizers are required. We report a new method for preparing Fe(3)O(4) nanoparticles by co-precipitation within the pores of agar gel samples. Permeated agar gels were then dried and ground into a powder, yielding agar-conjugated Fe(3)O(4) nanoparticles. Samples were characterized using XRD, FTIR, TGA, TEM and SQUID. This method for preparing agar-coated Fe(3)O(4) nanoparticles is environmentally friendly, inexpensive and scalable.

Chitosan composites for bone tissue engineering--an overview

Bone contains considerable amounts of minerals and proteins. Hydroxyapatite [Ca₁₀(PO₄)₆(OH)₂] is one of the most stable forms of calcium phosphate and it occurs in bones as major component (60 to 65%), along with other materials including collagen, chondroitin sulfate, keratin sulfate and lipids. In recent years, significant progress has been made in organ transplantation, surgical reconstruction and the use of artificial protheses to treat the loss or failure of an organ or bone tissue. Chitosan has played a major role in bone tissue engineering over the last two decades, being a natural polymer obtained from chitin, which forms a major component of crustacean exoskeleton. In recent years, considerable attention has been given to chitosan composite materials and their applications in the field of bone tissue engineering due to its minimal foreign body reactions, an intrinsic antibacterial nature, biocompatibility, biodegradability, and the ability to be molded into various geometries and forms such as porous structures, suitable for cell ingrowth and osteoconduction. The composite of chitosan including hydroxyapatite is very popular because of the biodegradability and biocompatibility in nature. Recently, grafted chitosan natural polymer with carbon nanotubes has been incorporated to increase the mechanical strength of these composites. Chitosan composites are thus emerging as potential materials for artificial bone and bone regeneration in tissue engineering. Herein, the preparation, mechanical properties, chemical interactions and in vitro activity of chitosan composites for bone tissue engineering will be discussed.

Langmuir-Blodgett films of pyridyldithio-modified multiwalled carbon nanotubes as a support to immobilize hydrogenase

Pyridylthio-modified multiwalled carbon nanotubes (pythio-MWNTs) have been prepared by a reaction of the oxidized MWNTs with S-(2-aminoethylthio)-2-thiopyridine hydrochloride. The obtained pythio-MWNTs nanocomposites formed stable floating monolayers at the air-water interface, which were transferred onto substrate surfaces by the Langmuir-Blodgett (LB) method. Compositions and morphologies of the LB films were characterized by absorption, Raman, X-ray photoelectron spectra as well as by scan electron microscopy and atomic force microscopy. These pythio-MWNTs LB films were then used as a support to immobilize hydrogenase (H(2)ase) to form bionanocomposite of pythio-MWNTs-H(2)ase. Cyclic voltammograms for indium tin oxide electrode covered with the pythio-MWNTs-H(2)ase films were investigated in both Ar and H(2) saturated 0.05 M KCl electrolyte solutions at pH from 4.0 to 9.0. A reversible redox couple of [4Fe-4S](2+/1+) clusters of H(2)ase was recorded when the pH value was 6.0 and 9.0, with reduction and oxidation potentials appearing at about -0.70 and -0.35 V vs Ag/AgCl, respectively. It was revealed that the H(2)ase was of high catalytic activity and strong stability in the LB films of pythio-MWNTs-H(2)ase. Hence, we suggested that the present bionanocomposites could be used as heterogeneous biocatalyst to catalyze reversible reaction between protons and H(2), resulting in potential applications in biohydrogen evolution and H(2) biofuel cells.