Structure–Activity Relationship between the in Vivo Skin Sensitizing Potency of Analogues of Phenyl Glycidyl Ether and the Induction of Nrf2-Dependent Luciferase Activity in the KeratinoSens in Vitro Assay

Estimating uncertainty in LLNA EC3 data and its impact on regulatory classifications

The murine Local Lymph Node Assay (LLNA) is a test that produces numerical results (EC3 values) quantifying the sensitization potency of chemicals. These results are broadly used in toxicology and serve as a basis for various classifications, which determine subsequent regulatory decisions. The continuing interest in LLNA data and the diminished likelihood of new experimental EC3 data being generated sparked this investigation of uncertainty. Instead of using the Gaussian distribution as a default choice for assessing variability in a data set, two strictly positive distributions were proposed and their performance over the available experimental EC3 values was tested. In the application stage, how the uncertainty in EC3 values affects the possible classifications was analyzed, and the percentage of the chemicals receiving ambiguous classification was determined. It was shown that this percentage is high, which increases the risk of improper classification. Two approaches were suggested in regulatory practice to address the uncertainty in the EC3 data: the approaches based on "grey zones" and the classification distribution. If a chemical cannot be classified unambiguously, the latter appears to be an acceptable means to assess the level of sensitization potency of chemicals and helps provide better regulatory decisions.

Nature-Derived Epoxy Resin Monomers with Reduced Sensitizing Capacity─Isosorbide-Based Bis-Epoxides

Epoxy resin systems (ERSs) are a class of thermosetting resins that become thermostable and insoluble polymers upon curing. They are widely used as components of protective surfaces, adhesives, and paints and in the manufacturing of composites in the plastics industry. The diglycidyl ether of bisphenol A (DGEBA) is used in 75-90% of ERSs and is thus by far the most used epoxy resin monomer (ERM). Unfortunately, DGEBA is a strong skin sensitizer and it is one of the most common causes of occupational contact dermatitis. Furthermore, DGEBA is synthesized from bisphenol A (BPA), which is a petroleum-derived chemical with endocrine-disruptive properties. In this work, we have used isosorbide, a renewable and nontoxic sugar-based material, as an alternative to BPA in the design of ERMs. Three different bis-epoxide isosorbide derivatives were synthesized: the diglycidyl ether of isosorbide (1) and two novel isosorbide-based bis-epoxides containing either a benzoic ester (2) or a benzyl ether linkage (3). Assessment of the in vivo sensitizing potency of the isosorbide bis-epoxides in the murine local lymph node assay (LLNA) showed that all three compounds were significantly less sensitizing than DGEBA, especially 2 which was nonsensitizing up to 25% w/v. The peptide reactivity showed the same order of reactivity as the LLNA, i.e., 2 being the least reactive, followed by 3 and then 1, which displayed similar peptide reactivity as DGEBA. Skin permeation of 2 and 3 was compared to DGEBA using ex vivo pig skin and static Franz cells. The preliminary investigations of the technical properties of the polymers formed from 1-3 were promising. Although further investigations of the technical properties are needed, all isosorbide bis-epoxides have the potential to be less sensitizing renewable replacements of DGEBA, especially 2 that had the lowest sensitizing potency in vivo as well as the lowest peptide reactivity.

Nature-derived epoxy resins: Synthesis, allergenicity, and thermosetting properties of pinoresinol diglycidyl ether

We describe a novel nature-derived epoxy resin monomer (ERM) derived from the plant lignan pinoresinol. Epoxy resins are thermosetting materials in global usage owing to their excellent technical properties such as flexibility and durability. However, their adverse health effects are often not considered and affect users of epoxy resins worldwide. Components of epoxy resin systems are strong skin sensitizers and cause allergic contact dermatitis. The reported prevalence attributable to epoxy chemicals is between 11.7 and 12.5% of all cases of occupational allergic contact dermatitis. We are committed to developing epoxy resins with reduced allergenic effect, while maintaining their excellent properties. The novel ERM, pinoresinol diglycidyl ether (PinoDGE), was synthesized in one step from pinoresinol and epichlorohydrin in 88% yield. It was not classified as a skin sensitizer in the in vivo local lymph node assay, at concentrations up to 0.17 m, as it did not cause a stimulation index >3 compared to control. Pinoresinol diglycidyl ether reacted with the model peptide AcPHCKRM in a reactivity assay and was predicted to be a skin sensitizer in the KeratinoSens assay. Preliminary cross-linking studies indicate that it has promising properties compared to commercially used ERMs. Pinoresinol diglycidyl ether could be seen as a lead compound for further development of alternative ERMs with a better safety profile based on natural and renewable sources for construction of epoxy resin polymers.

Progress on Reconstructed Human Skin Models for Allergy Research and Identifying Contact Sensitizers

Contact with the skin is inevitable or desirable for daily life products such as cosmetics, hair dyes, perfumes, drugs, household products, and industrial and agricultural products. Whereas the majority of these products are harmless, a number can become metabolized and/or activate the immunological defense via innate and adaptive mechanisms resulting in sensitization and allergic contact dermatitis upon following exposures to the same substance. Therefore, strict safety (hazard) assessment of actives and ingredients in products and drugs applied to the skin is essential to determine I) whether the chemical is a potential sensitizer and if so II) what is the safe concentration for human exposure to prevent sensitization from occurring. Ex vivo skin is a valuable model for skin penetration studies but due to logistical and viability limitations the development of in vitro alternatives is required. The aim of this review is to give a clear overview of the organotypic in vitro skin models (reconstructed human epidermis, reconstructed human skin, immune competent skin models incorporating Langerhans Cells and T-cells, skin-on-chip) that are currently commercially available or which are being used in a laboratory research setting for hazard assessment of potential sensitizers and for investigating the mechanisms (sensitization key events 1-4) related to allergic contact dermatitis. The limitations of the models, their current applications, and their future potential in replacing animals in allergy-related science are discussed.

Development of New Epoxy Resin Monomers - A Delicate Balance between Skin Allergy and Polymerization Properties

Epoxy resin monomers (ERMs) are used as building blocks for thermosetting polymers in applications where strong, flexible, and lightweight materials are required. Most epoxy resins are polymers of diglycidyl ether of bisphenol A (DGEBA). It is highly allergenic and causes occupational allergic contact dermatitis and contact allergy in the general population. Thus, measures to prevent exposure by protective clothing and education are not enough. This work describes a continuation of our research aiming at reducing the skin-sensitizing potency of ERMs while maintaining the ability to form polymers. Alternative ERMs were designed and synthesized whereafter the sensitizing potency was determined using the murine local lymph node assay (LLNA). The reactivity of the diepoxides toward a nucleophilic peptide was investigated, and the differences in reactivity explained using computational studies. The diepoxides were reacted with triethylenetetramine, and the formed polymers were tested for technical applicability using thermogravimetric analysis. We had previously shown that the absence of an oxygen atom in the side chains or removal of aromaticity reduced the sensitizing potency compared to that of DGEBA. Thus, a cycloaliphatic analogue 1 of DGEBA without ether oxygen in the side chains was considered promising and was synthesized. As predicted, the sensitizing potency was considerably reduced (10 times) compared to that of DGEBA. However, the technical properties of the polymer of this compound were not considered sufficient. More polar aromatic analogues were investigated, but they could not compete with our previously described ERMs regarding polymerization properties and with 1 regarding low skin sensitization properties. Development of alternative epoxy materials is a delicate balance between allergenic activity and polymerization properties. Tuning of structural properties together with investigation of polymerization conditions combined with skin sensitization studies should be used in industrial research and development. ERM 1 could be used as a lead compound for further studies of aliphatic ERMs.

Improvement of human cell line activation test (h-CLAT) using short-time exposure methods for prevention of false-negative results

Recently, animal testing has been affected by increasing ethical, social, and political concerns regarding animal welfare. Several in vitro safety tests for evaluating skin sensitization, such as the human cell line activation test (h-CLAT), have been proposed. However, similar to other tests, the h-CLAT has produced false-negative results, including in tests for acid anhydride and water-insoluble chemicals. In a previous study, we demonstrated that the cause of false-negative results from phthalic anhydride was hydrolysis by an aqueous vehicle, with IL-8 release from THP-1 cells, and that short-time exposure to liquid paraffin (LP) dispersion medium could reduce false-negative results from acid anhydrides. In the present study, we modified the h-CLAT by applying this exposure method. We found that the modified h-CLAT is a promising method for reducing false-negative results obtained from acid anhydrides and chemicals with octanol-water partition coefficients (LogK_ow) greater than 3.5. Based on the outcomes from the present study, a combination of the original and the modified h-CLAT is suggested for reducing false-negative results. Notably, the combination method provided a sensitivity of 95% (overall chemicals) or 93% (chemicals with LogK_ow > 2.0), and an accuracy of 88% (overall chemicals) or 81% (chemicals with LogK_ow > 2.0). We found that the combined method is a promising evaluation scheme for reducing false-negative results seen in existing in vitro skin-sensitization tests. In the future, we expect a combination of original and modified h-CLAT to be applied in a newly developed in vitro test for evaluating skin sensitization.

Targeting NRF2 for Improved Skin Barrier Function and Photoprotection: Focus on the Achiote-Derived Apocarotenoid Bixin

The transcription factor NRF2 (nuclear factor-E2-related factor 2) orchestrates major cellular defense mechanisms including phase-II detoxification, inflammatory signaling, DNA repair, and antioxidant response. Recent studies strongly suggest a protective role of NRF2-mediated gene expression in the suppression of cutaneous photodamage induced by solar UV (ultraviolet) radiation. The apocarotenoid bixin, a Food and Drug Administration (FDA)-approved natural food colorant (referred to as 'annatto') originates from the seeds of the achiote tree native to tropical America, consumed by humans since ancient times. Use of achiote preparations for skin protection against environmental insult and for enhanced wound healing has long been documented. We have recently reported that (i) bixin is a potent canonical activator of the NRF2-dependent cytoprotective response in human skin keratinocytes; that (ii) systemic administration of bixin activates NRF2 with protective effects against solar UV-induced skin damage; and that (iii) bixin-induced suppression of photodamage is observable in Nrf2+/+ but not in Nrf2-/- SKH-1 mice confirming the NRF2-dependence of bixin-induced antioxidant and anti-inflammatory effects. In addition, bixin displays molecular activities as sacrificial antioxidant, excited state quencher, PPAR (peroxisome proliferator-activated receptor) α/γ agonist, and TLR (Toll-like receptor) 4/NFκB (nuclear factor kappa-light-chain-enhancer of activated B cells) antagonist, all of which might be relevant to the enhancement of skin barrier function and environmental stress protection. Potential skin photoprotection and photochemoprevention benefits provided by topical application or dietary consumption of this ethno-pharmacologically validated phytochemical originating from the Americas deserves further preclinical and clinical examination.

Integrated decision strategies for skin sensitization hazard

One of the top priorities of the Interagency Coordinating Committee for the Validation of Alternative Methods (ICCVAM) is the identification and evaluation of non-animal alternatives for skin sensitization testing. Although skin sensitization is a complex process, the key biological events of the process have been well characterized in an adverse outcome pathway (AOP) proposed by the Organisation for Economic Co-operation and Development (OECD). Accordingly, ICCVAM is working to develop integrated decision strategies based on the AOP using in vitro, in chemico and in silico information. Data were compiled for 120 substances tested in the murine local lymph node assay (LLNA), direct peptide reactivity assay (DPRA), human cell line activation test (h-CLAT) and KeratinoSens assay. Data for six physicochemical properties, which may affect skin penetration, were also collected, and skin sensitization read-across predictions were performed using OECD QSAR Toolbox. All data were combined into a variety of potential integrated decision strategies to predict LLNA outcomes using a training set of 94 substances and an external test set of 26 substances. Fifty-four models were built using multiple combinations of machine learning approaches and predictor variables. The seven models with the highest accuracy (89-96% for the test set and 96-99% for the training set) for predicting LLNA outcomes used a support vector machine (SVM) approach with different combinations of predictor variables. The performance statistics of the SVM models were higher than any of the non-animal tests alone and higher than simple test battery approaches using these methods. These data suggest that computational approaches are promising tools to effectively integrate data sources to identify potential skin sensitizers without animal testing. Published 2016. This article has been contributed to by US Government employees and their work is in the public domain in the USA.

In vitro methods for hazard assessment of industrial chemicals - opportunities and challenges

Allergic contact dermatitis (ACD) is a delayed-type hypersensitivity immune reaction mediated by T-lymphocytes as a result of repeated exposure of an allergen primarily on skin. ACD accounts for up to 95% of occupational skin diseases, with epoxy resins implicated as one of the most common causes of ACD. Efficient high-throughput in vitro screening for accurate identification of compounds and materials that may pose hazardous risks in the workplace is crucial. At present, the murine local lymph node assay is the 'method of choice' for predicting the sensitizing potency of contact allergens. As the 3Rs principles of reduction, refinement, and replacement in animal testing has gained political and economic momentum, several in vitro screening methods have been developed for identifying potential contact allergens. To date, these latter methods have been utilized primarily to assess the skin sensitizing potential of the chemical components of cosmetic products with scant research attention as to the applicability of these methods to industrial chemicals, particularly epoxy resins. Herein we review the currently utilized in vitro methods and identify the knowledge gaps with regard to assessing the generalizability of in vitro screening methods for assessing the skin sensitizing potential of industrial chemicals.

Predicting skin sensitizer potency based on in vitro data from KeratinoSens and kinetic peptide binding: global versus domain-based assessment

Three in vitro methods for the prediction of the skin sensitization hazard have been validated. However, predicting sensitizer potency is a key requirement for risk assessment. Here, we report a database of 312 chemicals tested in the KeratinoSens™ assay and for kinetic peptide binding. These data were used in multiple regression analysis against potency in the local lymph node assay (LLNA). The dataset covers the majority of chemicals from the validation of the LLNA to predict human potency and this subset was analyzed for prediction of human sensitization potency by in vitro data. Global analysis yields a regression of in vitro data to LLNA pEC3 with an R(2) of 60% predicting LLNA EC3 with a mean error of 3.5-fold. The highest weight in the regression has the reaction rate with peptides, followed by Nrf2-induction and cytotoxicity in KeratinoSens™. The correlation of chemicals tested positive in vitro with human data has an R(2) of 49%, which is similar to the correlation between LLNA and human data. Chemicals were then grouped into mechanistic domains based on experimentally observed peptide-adduct formation and predictions from the TIMES SS software. Predictions within these domains with a leave-one-out approach were more accurate, and for several mechanistic domains LLNA EC3 can be predicted with an error of 2- to 3-fold. However, prediction accuracy differs between domains and domain assignment cannot be made for all chemicals. Thus, this comprehensive analysis indicates that combining global and domain models to assess sensitizer potency may be a practical way forward.

Epoxyalcohols: bioactivation and conjugation required for skin sensitization

Allylic alcohols, such as geraniol 1, are easily oxidized by varying mechanisms, including the formation of both 2,3-epoxides and/or aldehydes. These epoxides, aldehydes, and epoxy-aldehydes can be interconverted to each other, and the reactivity of them all must be considered when considering the sensitization potential of the parent allylic alcohol. An in-depth study of the possible metabolites and autoxidation products of allylic alcohols is described, covering the formation, interconversion, reactivity, and sensitizing potential thereof, using a combination of in vivo, in vitro, in chemico, and in silico methods. This multimodal study, using the integration of diverse techniques to investigate the sensitization potential of a molecule, allows the identification of potential candidate(s) for the true culprit(s) in allergic responses to allylic alcohols. Overall, the sensitization potential of the investigated epoxyalcohols and unsaturated alcohols was found to derive from metabolic oxidation to the more potent aldehyde where possible. Where this is less likely, the compound remains weakly or nonsensitizing. Metabolic activation of a double bond to form a nonconjugated, nonterminal epoxide moiety is not enough to turn a nonsensitizing alcohol into a sensitizer, as such epoxides have low reactivity and low sensitizing potency. In addition, even an allylic 2,3-epoxide moiety is not necessarily a potent sensitizer, as shown for 2, where formation of the epoxide weakens the sensitization potential.

Gene expression changes induced by skin sensitizers in the KeratinoSens™ cell line: Discriminating Nrf2-dependent and Nrf2-independent events

The KeratinoSens™ assay is an in vitro screen for the skin sensitization potential of chemicals. It is based on a luciferase reporter gene under the control of the antioxidant response element of the aldoketoreductase gene AKR1C2. The transferability, reproducibility, and predictivity of the KeratinoSens™ assay have been investigated in detail and it is currently under assessment at the European Center for Validation of Alternatives to animal testing (ECVAM). Here we investigate the sensitizer-induced gene expression in the KeratinoSens™ cell line at the mRNA level and discriminate Nrf2-dependent and Nrf2-independent events by using siRNA to better characterize this test system at the molecular level. The results show that (i) the sensitizer-induced luciferase signal in KeratinoSens™ cells is completely dependent on Nrf2. The same holds true for the luciferase induction observed for the false positive chemical Tween80, indicating that the false positive result is not due to recruitment of an alternative transcription factor. (ii) Luciferase induction parallels the induction of endogenous Nrf2-dependent genes, indicating that the luciferase signal is representative for the sensitizer-induced Nrf2-response. (iii) The induction by sensitizers of additional genetic markers related to heat shock proteins and cellular stress could be reproduced in the KeratinoSens™ cell line and they were shown to be Nrf2-independent. These results confirm that the KeratinoSens™ cell line is a rapid and adequate screening tool to assess the sensitizer-induced Nrf2-response in keratinocytes.

A dataset on 145 chemicals tested in alternative assays for skin sensitization undergoing prevalidation

Skin sensitization is a key endpoint for cosmetic ingredients, with a forthcoming ban for animal testing in Europe. Four alternative tests have so far been submitted to ECVAM prevalidation: (i) MUSST and (ii) h-Clat assess surface markers on dendritic cell lines, (iii) the direct peptide reactivity assay (DPRA) measures reactivity with model peptides and (iv) the KeratinoSens(TM) assay which is based on detection of Nrf2-induced luciferase. It is anticipated that only an integrated testing strategy (ITS) based on a battery of tests might give a full replacement providing also a sensitization potency assessment, but this concept should be tested with a data-driven analysis. Here we report a database on 145 chemicals reporting the quantitative endpoints measured in a U937- test, the DPRA and KeratinoSens(TM) . It can serve to develop data-driven ITS approaches as we show in a parallel paper and provides a view as to the current ability to predict with in vitro tests as we are entering 2013. It may also serve as reference database when benchmarking new molecules with in vitro based read-across and find use as a reference database when evaluating new tests. The tests and combinations thereof were evaluated for predictivity, and overall a similar predictivity was found as before on three-fold smaller datasets. Analysis of the dose-response parameters of the individual tests indicates a correlation to sensitization potency. Detailed analysis of chemicals false-negative and false-positive in two tests helped to define limitations in the tests but also in the database derived from animal studies.

The Keap1-Nrf2 cell defense pathway--a promising therapeutic target?

By regulating the basal and inducible expression of an abundance of detoxification enzymes, antioxidant proteins, xenobiotic transporters and other stress response proteins, the Keap1-Nrf2 pathway plays a crucial role in determining the sensitivity of mammalian cells to chemical and oxidative insults that have the capacity to provoke cellular harm. This review highlights historical and recent advances in our understanding of the molecular mechanisms that regulate the activity of the Keap1-Nrf2 pathway. The important role of Nrf2 in protecting against the onset of specific diseases and drug-induced toxicities is also examined, alongside the emerging role of Nrf2 in promoting oncogenesis and chemotherapeutic drug resistance. A particular emphasis is placed on the potential for translation of this mechanistic understanding into clinical strategies that can improve human health, with consideration of the potential applications of targeting Nrf2 therapeutically.