Mass fractions, solubility, speciation and isotopic compositions of iron in coal and municipal waste fly ash

Deposition of anthropogenic aerosols may contribute significantly to dissolved Fe in the open ocean, affecting marine primary production and biogeochemical cycles; however, fractional solubility of Fe is not well understood for anthropogenic aerosols. This work investigated mass fractions, solubility, speciation and isotopic compositions of Fe in coal and municipal waste fly ash. Compared to desert dust (3.1 ± 1.1%), the average mass fraction of Fe was higher in coal fly ash (6.2 ± 2.7%) and lower in municipal waste fly ash (2.6 ± 0.4%), and the average Fe/Al ratios were rather similar for the three types of particles. Municipal waste fly ash showed highest Fe solubility (1.98 ± 0.43%) in acetate buffer (pH: 4.3), followed by desert dust (0.43 ± 0.30%) and coal fly ash (0.24 ± 0.28%), suggesting that not all the anthropogenic aerosols showed higher Fe solubility than desert dust. For the samples examined in our work, amorphous Fe appeared to be an important controlling factor for Fe solubility, which was not correlated with particle size or BET surface area. Compared to desert dust (-0.05‰ to 0.21‰), coal and municipal waste fly ash showed similar or even higher δ⁵⁶Fe values for total Fe (range: 0.05‰ to 0.75‰), implying that the presence of coal or municipal waste fly ash may not be able to explain significantly smaller δ⁵⁶Fe values reported for total Fe in ambient aerosols affected by anthropogenic sources.

2019‒2020 Australian bushfire air particulate pollution and impact on the South Pacific Ocean

During late 2019 and early 2020, Australia experienced one of the most active bushfire seasons that advected large emissions over the adjacent ocean. Herein, we present a comprehensive research on mixed atmospheric aerosol particulate pollution emitted by wildfires in the atmosphere and the ocean. Based on a wide range of physical and biochemical data, including the Aerosol Robotic Network, multi-satellite observations, and Argo floats, we investigated the spatio-temporal variations and mixed compositions of aerosol particles, deposition in the coastal waters of eastern Australia and the South Pacific Ocean, and biogeochemical responses in the water column. Four types of wildfire-derived mixed particles were classified by using the optical properties of aerosols into four types, including the background aerosols, mineral dust, wildfire smoke particles, and residual smoke. The coarse particles accounted for more than 60% of the mineral dust on 22 November 2019 in the Tasman Sea; afterwards, during the wildfire smoke episode from December 2019 to January 2020, the particles affected large areas of the atmosphere such as eastern Australia, the South Pacific Ocean, and South America. The maximum value of the aerosol optical depth reached 2.74, and the proportion of fine particles accounted for 98.9% in the smoke episode. Mineral dust and smoke particles from the fire emissions changed the particle composition in the surface ocean. Particle deposition accounted for increases in chlorophyll-a concentration (Chla) standardized anomaly up to maximum of 23.3 with a lag time of less than 8 days. In the vertical direction, float observations showed the impact of exogenous particles on the water column could up to 64.7 m deep, resulting in Chla of 1.85 mg/m3. The high Chla lasted for a minimum period of two months until it returned to normal level.

Photo-oxidation of particle phase iron species dominates the generation of reactive oxygen species in secondary aerosol

This study presents an experimental investigation on the photochemical transformation of iron species in aerosol including dissolution of insoluble iron species into soluble fraction, and soluble ferric oxidation to ferrous form. This process has significantly contributed to the aerosol oxidative potential in generation of reactive oxygen species (ROS). We conducted both laboratory experiment of UV irradiation and real world solar irradiation on large variation of aerosol samples for the characterization of iron speciation in insoluble and soluble fractions to investigate their transformation under photooxidation process. The results showed that the real world solar irradiation significantly increased the soluble Fe(II) fraction, and this is corroborated by laboratory simulation of UV irradiation showing increasing soluble Fe(II) fraction with elongating aging time. The results further exhibited that the dissolution of iron component into soluble fraction was a dominant process, followed by the conversion of soluble ferric to ferrous ions. Further, the study confirmed that the oxidative potential of particulate matter (PM) is attributed dominantly to the abundance of transition metals, i.e. Fe, and the incremental ROS generation after photochemical process is attributed largely to the transformation of solid phase iron species to soluble Fe(II). The results suggest that transition metals, for example by iron in this study, play an important role in secondary aerosol process.

Characteristics and formation mechanism of persistent extreme haze pollution events in Chengdu, southwestern China

Extreme PM_2.5 and nonmethane hydrocarbon (NMHC) pollution often occurs simultaneously during the winter. To study the formation mechanism of two pollution events in Chengdu from 23 December 2016 to 31 January 2017, we explored the weather conditions, chemical composition, secondary pollutant conversion, aerosol hygroscopic growth, and potential source contribution function (PSCF) during this period. During the study period, the humidity was high (67.9%), the wind speed was low (1.0 m s^-1), the height of the planetary boundary layer was low (463.4 m), and the atmosphere remained stationary. The potential source regions of PM_2.5 and NMHCs were locally polluted sites in the southwestern and southern regions of Chengdu, affected by the southwesterly air mass trajectories. PM_2.5 and sulfur oxidation ratios (SOR), nitrogen oxidation ratios (NOR) and secondary organic aerosol formation potential (SOAP) showed a strong positive correlation. As pollution increased, the conversion from SO₂, NO_x and NMHCs to sulfate, nitrate and SOAs increased, resulting in an increase in the secondary aerosol concentration. As the relative humidity increases, aerosols begin to undergo rapid hygroscopic growth, which seriously affects the visibility of the atmosphere. In general, pollutant emissions, static weather, and secondary conversion, among other factors, lead to the occurrence of this persistent extreme haze pollution.

Spring 2018 Asian Dust Events: Sources, Transportation, and Potential Biogeochemical Implications

The input of aeolian mineral dust to the oceans is regarded as the major source in supplying bioavailable iron for phytoplankton growth. Severe dust events swept over East Asia during the 26 March to the 4 April 2018, decreasing air quality to hazardous levels, with maximum PM10 mass concentrations above 3000 μg m−3 in northern China. Based on a comprehensive approach that combines multiple satellite measurements, ground observations, and model simulation, we revealed that two severe Asian dust events originating from the Taklimakan and Gobi deserts on 26 March and 1 April, were transported through northern China and the East/Japan Sea, to the North Pacific Ocean by westerly wind systems. Transportation pathways dominated by mineral dust aerosols were observed at altitudes of 2–7 km in the source regions, and then ascending to 3–10 km in the North Pacific Ocean, with relatively denser dust plumes within the second dust episode than there were during the first. Our results suggest that mineral dust emitted from the Taklimakan and Gobi deserts could increase ocean primary productivity in the North Pacific Ocean by up to ~50%, compared to average conditions. This emphasizes the potential importance of the deposition of Asian mineral dust over the North Pacific Ocean for enhancing the biological pump.

Impact of dust storm on phytoplankton bloom over the Arabian Sea: a case study during March 2012

Dust storms affect the primary productivity of the ocean by providing necessary micronutrients to the surface layer. One such dust storm during March 2012 led to a substantial reduction in visibility and enhancement in aerosol optical depth (AOD) up to ~ 0.8 (AOD increased from 0.1 to 0.9) over the Arabian Sea. We explored the possible effects and mechanisms through which this particular dust storm could impact the ocean's primary productivity (phytoplankton concentration), using satellite-borne remote sensors and reanalysis model data (2003-2016). The climatological analyses revealed anomalous March 2012 in terms of dust deposition and enhancement in phytoplankton concentration in the month of March during 2003-2016 over this region. The studied dust storm accounts for increase in the daily average surface dust deposition rate from ~ 3 to ~53 mg m^-2 day^-1, which is followed by a significant enhancement in the chlorophyll-a (Chl_a) concentration (~ 2 to ~9 mg m^-3). We show strong association between a dust storm and an event of anomalously high biological production (with a 4-day forward lag) in the Arabian Sea. We suggest that the increase in biological production results from the superposition of two complementary processes (deposition of atmospheric nutrients and deepening of the mixed layer due to dust-induced sea surface temperature cooling) that enhance nutrient availability in the euphotic layer.

Characterization and acid-mobilization study for typical iron-bearing clay mineral

In this study, iron speciation in five standard clay samples was characterized. Iron mobilization from these clays was then measured in acidic media. For comparison, a commercially available Arizona test dust (ATD) was also observed. The results showed that the free-Fe contents of clays were commonly lower than that of dust aerosols. The components of clays were dominant by the structural Fe held in the aluminosilicate lattice. The iron solubility of the clays were in the order of KGa-2 > SWy-2 > CCa-2 > IMt-2 > NAu-2. Based upon the Mössbauer spectrum and transmission electron microscopy (TEM) analysis, the Fe(II) fraction and the Fe/Si ratio of clay particles changed after dissolution, suggesting the total Fe solubility depended on the Fe atom states existing within the aluminosilicate lattice. The Fe in KGa-2 and SWy-2 was most likely substituted for alkaline elements as the interlayer ions held by ionic bonds in the aluminosilicate, which are more liable to dissolution. However, the Fe in NAu-2 was more likely to be bound by strong covalent bonds in aluminosilicate mineral, which is less soluble. The much highly soluble Fe in ATD was not only linked to the dissolution of an appreciable fraction of Fe(II), but also could be attributed to the fact that the Fe bonds in the clay fraction of ATD were mainly present as ionic bonds. The TEM images showed that reacted clay particles displayed less aggregate particles, with nanoparticle aggregates and the Fe/S-rich tiny particles attached to the remains.

Anthropogenic combustion iron as a complex climate forcer

Atmospheric iron affects the global carbon cycle by modulating ocean biogeochemistry through the deposition of soluble iron to the ocean. Iron emitted by anthropogenic (fossil fuel) combustion is a source of soluble iron that is currently considered less important than other soluble iron sources, such as mineral dust and biomass burning. Here we show that the atmospheric burden of anthropogenic combustion iron is 8 times greater than previous estimates by incorporating recent measurements of anthropogenic magnetite into a global aerosol model. This new estimation increases the total deposition flux of soluble iron to southern oceans (30-90 °S) by 52%, with a larger contribution of anthropogenic combustion iron than dust and biomass burning sources. The direct radiative forcing of anthropogenic magnetite is estimated to be 0.021 W m^-2 globally and 0.22 W m^-2 over East Asia. Our results demonstrate that anthropogenic combustion iron is a larger and more complex climate forcer than previously thought, and therefore plays a key role in the Earth system.

Anthropogenic combustion iron as a complex climate forcer

Atmospheric iron affects the global carbon cycle by modulating ocean biogeochemistry through the deposition of soluble iron to the ocean. Iron emitted by anthropogenic (fossil fuel) combustion is a source of soluble iron that is currently considered less important than other soluble iron sources, such as mineral dust and biomass burning. Here we show that the atmospheric burden of anthropogenic combustion iron is 8 times greater than previous estimates by incorporating recent measurements of anthropogenic magnetite into a global aerosol model. This new estimation increases the total deposition flux of soluble iron to southern oceans (30–90 °S) by 52%, with a larger contribution of anthropogenic combustion iron than dust and biomass burning sources. The direct radiative forcing of anthropogenic magnetite is estimated to be 0.021 W m⁻² globally and 0.22 W m⁻² over East Asia. Our results demonstrate that anthropogenic combustion iron is a larger and more complex climate forcer than previously thought, and therefore plays a key role in the Earth system.

As a source of soluble iron, anthropogenic combustion iron is considered less important than natural sources. Here, the authors combine new measurements with a global aerosol model and show the atmospheric burden of anthropogenic combustion iron to be 8 times greater than previous estimates.

Volcanic ash as a driver of enhanced organic carbon burial in the Cretaceous

On greater than million year timescales, carbon in the ocean-atmosphere-biosphere system is controlled by geologic inputs of CO₂ through volcanic and metamorphic degassing. High atmospheric CO₂ and warm climates in the Cretaceous have been attributed to enhanced volcanic emissions of CO₂ through more rapid spreading at mid-ocean ridges and, in particular, to a global flare-up in continental arc volcanism. Here, we show that global flare-ups in continental arc magmatism also enhance the global flux of nutrients into the ocean through production of windblown ash. We show that up to 75% of Si, Fe and P is leached from windblown ash during and shortly after deposition, with soluble Si, Fe and P inputs from ash alone in the Cretaceous being higher than the combined input of dust and rivers today. Ash-derived nutrient inputs may have increased the efficiency of biological productivity and organic carbon preservation in the Cretaceous, possibly explaining why the carbon isotopic signature of Cretaceous seawater was high. Variations in volcanic activity, particularly continental arcs, have the potential of profoundly altering carbon cycling at the Earth’s surface by increasing inputs of CO₂ and ash-borne nutrients, which together enhance biological productivity and burial of organic carbon, generating an abundance of hydrocarbon source rocks.

Atmospheric deposition of glacial iron in the Gulf of Alaska impacted by the position of the Aleutian Low

Our understanding of glacial flour dust storm delivery of iron to the Gulf of Alaska (GoA) is limited. Here we interpret concurrent time series satellite, meteorological, and aerosol geochemical data from the GoA to examine how interannual variability in regional weather patterns impacts offshore aerosol glacial Fe deposition. In 2011, when a northerly Aleutian Low (AL) was persistent during fall, dust emission was suppressed and highly intermittent due to prevalent wet conditions, low winds, and a deep early season snowpack. Conversely, in 2012, frequent and prolonged fall dust storms and high offshore glacial Fe transport were driven by dry conditions and strong offshore winds generated by persistent strong high pressure over the Alaskan interior and Bering Sea and a southerly AL. Twenty-five-fold interannual variability in regional offshore glacial aerosol Fe deposition indicates that glacial dust's impact on GoA nutrient budgets is highly dynamic and particularly sensitive to regional climate forcing.

Source and mixing state of iron-containing particles in Shanghai by individual particle analysis

Bioavailable iron (Fe) is an essential nutrient that can control oceanic productivity, thereby impacting the global carbon budget and climate. Therefore it is of vital importance to identify chemical species and mixing state of Fe-containing particles in the air, which are demonstrated to pose substantial impact on bioavailability of Fe. Using a single particle aerosol mass spectrometer (SPAMS), ~2,000,000 individual particles with mass spectra were collected in Shanghai for nearly 22d during the winter of 2011. Number fraction of Fe-containing particles (NfFe) varied in a wide range (<1-15%) throughout the measurement. Fe-containing particles were mainly clustered into four chemical groups, comprising of Fe-rich, K-rich, Dust and V-containing particle types. Analysis of mass spectra and mixing state suggests that Fe-containing particles correspond to various sources in Shanghai, especially anthropogenic sources iron/steel industrial activities, and fly ashes from both biomass burning and coal combustion, accounting for ~55% and ~18%, respectively. However, invasion of dust from northern desert areas is suspected to be more responsible for the spikes of NfFe (>10%), when Dust particle type contributed to >50% of Fe-containing particles. It is also revealed that Fe-containing particles were internally mixed with secondary species (e.g., sulfate and nitrate). Anthropogenic K-rich and Fe-rich particles tended to associate with both sulfate and nitrate, and thus might lead to more fraction of soluble Fe, compared to Dust particles. These results imply that atmospheric processing of Fe-containing particles from various sources might vary and thus would change the bioavailability of atmospheric Fe.

Continuous flow analysis of labile iron in ice-cores

The important active and passive role of mineral dust aerosol in the climate and the global carbon cycle over the last glacial/interglacial cycles has been recognized. However, little data on the most important aeolian dust-derived biological micronutrient, iron (Fe), has so far been available from ice-cores from Greenland or Antarctica. Furthermore, Fe deposition reconstructions derived from the palaeoproxies particulate dust and calcium differ significantly from the Fe flux data available. The ability to measure high temporal resolution Fe data in polar ice-cores is crucial for the study of the timing and magnitude of relationships between geochemical events and biological responses in the open ocean. This work adapts an existing flow injection analysis (FIA) methodology for low-level trace Fe determinations with an existing glaciochemical analysis system, continuous flow analysis (CFA) of ice-cores. Fe-induced oxidation of N,N'-dimethyl-p-pheylenediamine (DPD) is used to quantify the biologically more important and easily leachable Fe fraction released in a controlled digestion step at pH ~1.0. The developed method was successfully applied to the determination of labile Fe in ice-core samples collected from the Antarctic Byrd ice-core and the Greenland Ice-Core Project (GRIP) ice-core.

Enhancement of gaseous iodine emission by aqueous ferrous ions during the heterogeneous reaction of gaseous ozone with aqueous iodide

Gaseous I2 formation from the heterogeneous reaction of gaseous ozone with aqueous iodide in the presence of aqueous ferrous ion (Fe(2+)) was investigated by electron impact ionization mass spectrometry. Emission of gaseous I2 increased as a function of the aqueous FeCl2 concentration, and the maximum I2 formation with Fe(2+) was about 10 times more than without Fe(2+). This enhancement can be explained by the OH(-) scavenging by Fe(3+) formed from Fe(2+) ozonation to produce colloidal Fe(OH)3. This mechanism was confirmed by measurements of aqueous phase products using a UV-vis spectrometer and an electrospray ionization mass spectrometer. We infer that such a pH-buffering effect may play the key role in general halogen activations.

Iron solubility related to particle sulfur content in source emission and ambient fine particles

The chemical factors influencing iron solubility (soluble iron/total iron) were investigated in source emission (e.g., biomass burning, coal fly ash, mineral dust, and mobile exhaust) and ambient (Atlanta, GA) fine particles (PM2.5). Chemical properties (speciation and mixing state) of iron-containing particles were characterized using X-ray absorption near edge structure (XANES) spectroscopy and micro-X-ray fluorescence measurements. Bulk iron solubility (soluble iron/total iron) of the samples was quantified by leaching experiments. Major differences were observed in iron solubility in source emission samples, ranging from low solubility (<1%, mineral dust and coal fly ash) up to 75% (mobile exhaust and biomass burning emissions). Differences in iron solubility did not correspond to silicon content or Fe(II) content. However, source emission and ambient samples with high iron solubility corresponded to the sulfur content observed in single particles. A similar correspondence between bulk iron solubility and bulk sulfate content in a series of Atlanta PM2.5 fine particle samples (N = 358) further supported this trend. In addition, results of linear combination fitting experiments show the presence of iron sulfates in several high iron solubility source emission and ambient PM2.5 samples. These results suggest that the sulfate content (related to the presence of iron sulfates and/or acid-processing mechanisms by H(2)SO(4)) of iron-containing particles is an important proxy for iron solubility.

Iron organic speciation determination in rainwater using cathodic stripping voltammetry

A sensitive method using Competitive Ligand Exchange-Adsorptive Cathodic Stripping Voltammetry (CLE-ACSV) has been developed to determine for the first time iron (Fe) organic speciation in rainwater over the typical natural range of pH. We have adapted techniques previously developed in other natural waters to rainwater samples, using the competing ligand 1-nitroso-2-naphthol (NN). The blank was equal to 0.17±0.05 nM (n=14) and the detection limit (DL) for labile Fe was 0.15 nM which is 10-70 times lower than that of previously published methods. The conditional stability constant for NN under rainwater conditions was calibrated over the pH range 5.52-6.20 through competition with ethylenediaminetetraacetic acid (EDTA). The calculated value of the logarithm of β'(Fe(3+)(NN)(3)) increased linearly with increasing pH according to log β'(Fe(3+)(NN)(3)) (salinity=2.9, T=20 °C). The validation of the method was carried out using desferrioxamine mesylate B (DFOB) as a natural model ligand for Fe. Adequate detection windows were defined to detect this class of ligands in rainwater with 40 μM of NN from pH 5.52 to 6.20. The concentration of Fe-complexing natural ligands was determined for the first time in three unfiltered and one filtered rainwater samples. Organic Fe-complexing ligand concentrations varied from 104.2±4.1 nM equivalent of Fe(III) to 336.2±19.0 nM equivalent of Fe(III) and the logarithm of the conditional stability constants, with respect to Fe(3+), varied from 21.1±0.2 to 22.8±0.3. This method will provide important data for improving our understanding of the role of wet deposition in the biogeochemical cycling of iron.

A case study of Asian dust storm particles: chemical composition, reactivity to SO2 and hygroscopic properties

Mineral dust comprises a great fraction of the global aerosol loading, but remains the largest uncertainty in predictions of the future climate due to its complexity in composition and physico-chemical properties. In this work, a case study characterizing Asian dust storm particles was conducted by multiple analysis methods, including SEM-EDS, XPS, FT-IR, BET, TPD/mass and Knudsen cell/mass. The morphology, elemental fraction, source distribution, true uptake coefficient for SO2, and hygroscopic behavior were studied. The major components of Asian dust storm particles are aluminosilicate, SiO2 and CaCO3, with organic compounds and inorganic nitrate coated on the surface. It has a low reactivity towards SO2 with a true uptake coefficient, 5.767 x 10(-6), which limits the conversion of SO2 to sulfate during dust storm periods. The low reactivity also means that the heterogeneous reactions of SO2 in both dry and humid air conditions have little effect on the hygroscopic behavior of the dust particles.

Impact of atmospheric deposition of anthropogenic and natural trace metals on Northwestern Mediterranean surface waters: a box model assessment

Under stratified oligotrophic conditions (May-November), the surface mixed layer of the Northwestern Mediterranean constitutes a homogeneous water volume of 10-30 m depth. In other respects, the mean residence time of Ligurian surface waters (0-200 m) is 102 days. It is therefore possible to quantify the extent to which atmospheric deposition of trace metals affects surface waters. On the basis of literature data on anthropogenic and natural trace metals, we demonstrate that the ratios between total seawater labile atmospheric deposition during 102 days (Δc) and dissolved TM concentrations in Ligurian surface waters (c) illustrate the impact of atmospheric deposition on surface seawater (Δc/c). High ratios indicate surface TM enrichments, while low ratios indicate surface TM depletion, due to the quasi-complete sorption and removal of TMs by plankton during spring bloom. The simple box model proposed here may be used for other marine regions where hydrodynamical and physico-chemical constraints are well defined.

Atmospheric iron deposition: global distribution, variability, and human perturbations

Atmospheric inputs of iron to the open ocean are hypothesized to modulate ocean biogeochemistry. This review presents an integration of available observations of atmospheric iron and iron deposition, and also covers bioavailable iron distributions. Methods for estimating temporal variability in ocean deposition over the recent past are reviewed. Desert dust iron is estimated to represent 95% of the global atmospheric iron cycle, and combustion sources of iron are responsible for the remaining 5%. Humans may be significantly perturbing desert dust (up to 50%). The sources of bioavailable iron are less well understood than those of iron, partly because we do not know what speciation of the iron is bioavailable. Bioavailable iron can derive from atmospheric processing of relatively insoluble desert dust iron or from direct emissions of soluble iron from combustion sources. These results imply that humans could be substantially impacting iron and bioavailable iron deposition to ocean regions, but there are large uncertainties in our understanding.

10th Anniversary review: applications of analytical techniques in laboratory studies of the chemical and climatic impacts of mineral dust aerosol in the Earth's atmosphere

It is clear that mineral dust particles can impact a number of global processes including the Earth's climate through direct and indirect climate forcing, the chemical composition of the atmosphere through heterogeneous reactions, and the biogeochemistry of the oceans through dust deposition. Thus, mineral dust aerosol links land, air, and oceans in unique ways unlike any other type of atmospheric aerosol. Quantitative knowledge of how mineral dust aerosol impacts the Earth's climate, the chemical balance of the atmosphere, and the biogeochemistry of the oceans will provide a better understanding of these links and connections and the overall impact on the Earth system. Advances in the applications of analytical laboratory techniques have been critical for providing valuable information regarding these global processes. In this mini review article, we discuss examples of current and emerging techniques used in laboratory studies of mineral dust chemistry and climate and potential future directions.

Bioavailable iron in the Southern Ocean: the significance of the iceberg conveyor belt

Productivity in the Southern Oceans is iron-limited, and the supply of iron dissolved from aeolian dust is believed to be the main source from outside the marine reservoir. Glacial sediment sources of iron have rarely been considered, as the iron has been assumed to be inert and non-bioavailable. This study demonstrates the presence of potentially bioavailable Fe as ferrihydrite and goethite in nanoparticulate clusters, in sediments collected from icebergs in the Southern Ocean and glaciers on the Antarctic landmass. Nanoparticles in ice can be transported by icebergs away from coastal regions in the Southern Ocean, enabling melting to release bioavailable Fe to the open ocean. The abundance of nanoparticulate iron has been measured by an ascorbate extraction. This data indicates that the fluxes of bioavailable iron supplied to the Southern Ocean from aeolian dust (0.01-0.13 Tg yr(-1)) and icebergs (0.06-0.12 Tg yr(-1)) are comparable. Increases in iceberg production thus have the capacity to increase productivity and this newly identified negative feedback may help to mitigate fossil fuel emissions.

The Southern Ocean Biological Response to Aeolian Iron Deposition

Biogeochemical rate processes in the Southern Ocean have an important impact on the global environment. Here, we summarize an extensive set of published and new data that establishes the pattern of gross primary production and net community production over large areas of the Southern Ocean. We compare these rates with model estimates of dissolved iron that is added to surface waters by aerosols. This comparison shows that net community production, which is comparable to export production, is proportional to modeled input of soluble iron in aerosols. Our results strengthen the evidence that the addition of aerosol iron fertilizes export production in the Southern Ocean. The data also show that aerosol iron input particularly enhances gross primary production over the large area of the Southern Ocean downwind of dry continental areas.

Global iron connections between desert dust, ocean biogeochemistry, and climate

The environmental conditions of Earth, including the climate, are determined by physical, chemical, biological, and human interactions that transform and transport materials and energy. This is the "Earth system": a highly complex entity characterized by multiple nonlinear responses and thresholds, with linkages between disparate components. One important part of this system is the iron cycle, in which iron-containing soil dust is transported from land through the atmosphere to the oceans, affecting ocean biogeochemistry and hence having feedback effects on climate and dust production. Here we review the key components of this cycle, identifying critical uncertainties and priorities for future research.