Optical tweezers for measuring red blood cell elasticity: application to the study of drug response in sickle cell disease

P. falciparum Invasion and Erythrocyte Aging

Plasmodium parasites need to find red blood cells (RBCs) that, on the one hand, expose receptors for the pathogen ligands and, on the other hand, maintain the right geometry to facilitate merozoite attachment and entry into the red blood cell. Both characteristics change with the maturation of erythrocytes. Some Plasmodia prefer younger vs. older erythrocytes. How does the life evolution of the RBC affect the invasion of the parasite? What happens when the RBC ages? In this review, we present what is known up until now.

Deformability of mouse erythrocytes in different diluents measured using optical tweezers

Optical tweezers are widely used to measure the mechanical properties of erythrocytes, which is crucial to the study of pathology and clinical diagnosis of disease. During the measurement, the blood sample is diluted and suspended in an exogenous physiological fluid, which may affect the elastic properties of the cells in vitro. Here, we investigate the effect of different diluents on the elastic properties of mouse erythrocytes by quantitatively evaluating their elastic constants using optical tweezers. The diluents are plasma extracted from mouse blood, veterinary blood diluent (V-52D), Dulbecco's modified Eagle's medium (DMEM), phosphate-buffered saline (PBS), and normal saline (NS). To create an environment that closely resembles in vivo conditions, the experiment is performed at 36.5 °C. The results show that the spring constant of mouse erythrocytes in plasma is 6.23 ± 0.41 μN m-1. The elasticity of mouse erythrocytes in V-52D and DMEM is 8.21 ± 0.91 and 6.95 ± 0.85 μN m-1, which are higher than that in plasma extracted from blood, whereas, the elasticity in PBS and NS is 4.23 ± 0.85 and 4.68 ± 0.79 μN m-1, which are less than that in plasma extracted from blood. At last, we observe the size and circularity of erythrocytes in different diluents, and consider that the erythrocyte diameter and circularity may affect cell deformability. Our results provide a reference of the diluent choice for measuring the mechanical properties of erythrocytes in vitro.

Measurement of red blood cell deformability during morphological changes using rotating-glass-plate-based scanning optical tweezers

It is important to measure the deformability of red blood cells (RBCs) before transfusion, which is a key factor in the gas transport ability of RBCs and changes during storage of RBCs in vitro. Moreover, the morphology of RBCs also changes during storage. It is proposed that the change in morphology is related to the change in deformability. However, the efficiency of typical methods that use particles as handles is low, especially in the deformability measurement of echinocyte and spherocytes. Therefore, the deformability of RBCs with different morphologies is hard to be measured and compared in the same experiment. In this study, we developed a cost-effective and efficient rotating-glass-plate-based scanning optical tweezers device for the measurement of deformability of RBCs. The performance of this device was evaluated, and the deformability of three types of RBCs was measured using this device. Our results clearly show that the change of erythrocyte morphology from discocyte to echinocyte and spherocyte during storage in vitro is accompanied by a decrease in deformability.

Red Blood Cell Deformability Is Expressed by a Set of Interrelated Membrane Proteins

Red blood cell (RBC) deformability, expressing their ability to change their shape, allows them to minimize their resistance to flow and optimize oxygen delivery to the tissues. RBC with reduced deformability may lead to increased vascular resistance, capillary occlusion, and impaired perfusion and oxygen delivery. A reduction in deformability, as occurs during RBC physiological aging and under blood storage, is implicated in the pathophysiology of diverse conditions with circulatory disorders and anemias. The change in RBC deformability is associated with metabolic and structural alterations, mostly uncharacterized. To bridge this gap, we analyzed the membrane protein levels, using mass spectroscopy, of RBC with varying deformability determined by image analysis. In total, 752 membrane proteins were identified. However, deformability was positively correlated with the level of only fourteen proteins, with a highly significant inter-correlation between them. These proteins are involved in membrane rafting and/or the membrane-cytoskeleton linkage. These findings suggest that the reduction of deformability is a programmed (not arbitrary) process of remodeling and shedding of membrane fragments, possibly mirroring the formation of extracellular vesicles. The highly significant inter-correlation between the deformability-expressing proteins infers that the cell deformability can be assessed by determining the level of a few, possibly one, of them.

Living cells as a biological analog of optical tweezers - a non-invasive microrheology approach

Microrheology, the study of fluids on micron length-scales, promises to reveal insights into cellular biology, including mechanical biomarkers of disease and the interplay between biomechanics and cellular function. Here a minimally-invasive passive microrheology technique is applied to individual living cells by chemically binding a bead to the surface of a cell, and observing the mean squared displacement of the bead at timescales ranging from milliseconds to 100s of seconds. Measurements are repeated over the course of hours, and presented alongside analysis to quantify changes in the cells' low-frequency elastic modulus, G0', and the cell's dynamics over the time window ∼10-2 s to 10 s. An analogy to optical trapping allows verification of the invariant viscosity of HeLa S3 cells under control conditions and after cytoskeletal disruption. Stiffening of the cell is observed during cytoskeletal rearrangement in the control case, and cell softening when the actin cytoskeleton is disrupted by Latrunculin B. These data correlate with conventional understanding that integrin binding and recruitment triggers cytoskeletal rearrangement. This is, to our knowledge, the first time that cell stiffening has been measured during focal adhesion maturation, and the longest time over which such stiffening has been quantified by any means. STATEMENT OF SIGNIFICANCE: Here, we present an approach for studying mechanical properties of live cells without applying external forces or inserting tracers. Regulation of cellular biomechanics is crucial to healthy cell function. For the first time in literature, we can non-invasively and passively quantify cell mechanics during interactions with functionalised surface. Our method can monitor the maturation of adhesion sites on the surface of individual live cells without disrupting the cell mechanics by applying forces to the cell. We observe a stiffening response in cells over tens of minutes after a bead chemically binds. This stiffening reduces the deformation rate of the cytoskeleton, although the internal force generation increases. Our method has potential for applications to study mechanics during cell-surface and cell-vesicle interactions.

Competition between deformation and free volume quantified by 3D image analysis of red blood cell

Cells in living organisms are subjected to mechanical strains caused by external forces like overcrowding, resulting in strong deformations that affect cell function. We study the interplay between deformation and crowding of red blood cells (RBCs) in dispersions of nonabsorbing rod-like viruses. We identify a sequence of configurational transitions of RBC doublets, including configurations that can only be induced by long-ranged attraction: highly fluctuating T-shaped and face-to-face configurations at low, and doublets approaching a complete spherical configuration at high, rod concentrations. Complementary simulations are used to explore different energy contributions to deformation as well as the stability of RBC doublet configurations. Our advanced analysis of 3D reconstructed confocal images of RBC doublets quantifies the depletion interaction and the resulting deformation energy. Thus, we introduce a noninvasive, high-throughput platform that is generally applicable to investigate the mechanical response of biological cells to external forces and characterize their mechanical properties.

Flexible acoustic lens-based surface acoustic wave device for manipulation and directional transport of micro-particles

Microfluidics is an emerging technology that is playing increasingly important roles in biomedical and pharmaceutical research and development. Surface acoustic waves (SAWs) have been combined with microfluidics technology to establish a SAW-based microfluidics technology that uses the unique interaction between the two techniques to manipulate substances effectively in fluids on the surface of a substrate. This paper reports a method to generate SAWs using conventional planar ultrasonic transducers and acoustic lenses. Additionally, this method is introduced to manipulate particles effectively on a substrate surface. It is demonstrated that the particle positions can be manipulated precisely in any direction on the substrate surface, thus enabling high-precision particle manipulation. We also proposed the generation of nonplanar SAWs via appropriate design of the acoustic lens and realized directional particle transport. In addition, structures to enhance forward-propagating acoustic beams are proposed. The proposed method has potential for use in microfluidics and biomedical applications, allowing tasks such as flexible cell manipulation on a chip to be performed without complex design or micromachining.

Red blood cell rheology during a complete blood count: A proof of concept

Counting and sizing blood cells in hematological analyzers is achieved using the Coulter principle. The cells flow in a micro-aperture in which a strong electrical field is imposed, so that an electrical perturbation, called pulse, is measured each time a cell crosses the orifice. The pulses are expected to contain information on the shape and deformability of Red Blood Cells (RBCs), since recent studies state that RBCs rotate and deform in the micro-orifice. By implementing a dedicated numerical model, the present study sheds light on a variety of cells dynamics, which leads to different associated pulse signatures. Furthermore, simulations provide new insights on how RBCs shapes and mechanical properties affect the measured signals. Those numerical observations are confirmed by experimental assays. Finally, specific features are introduced for assessing the most relevant characteristics from the various pulse signatures and shown to highlight RBCs alterations induced by drugs. In summary, this study paves the way to a characterization of RBC rheology by routine hematological instruments.

Emerging functional microfluidic assays for the study of thromboinflammation in sickle cell disease

PURPOSE OF REVIEW

This review briefly summarizes the significant impact of thromboinflammation in sickle cell disease in relation to recent advances in biomarkers that are used in functional microfluidic assays.

RECENT FINDINGS

Sickle cell disease (SCD) is an inherited hemoglobinopathy that affects 100 000 Americans and millions worldwide. Patients with SCD exhibit chronic haemolysis, chronic inflammation and thrombosis, and vaso-occlusion, triggering various clinical complications, including organ damage and increased mortality and morbidity. Recent advances in functional microfluidic assays provide direct biomarkers of disease, including abnormal white blood cell and red blood cell adhesion, cell aggregation, endothelial degradation and contraction, and thrombus formation.

SUMMARY

Novel and emerging functional microfluidic assays are a promising and feasible strategy to comprehensively characterize thromboinflammatory reactions in SCD, which can be used for personalized risk assessment and tailored therapeutic decisions.

Quantitative Acoustophoresis

Studying cellular mechanics allows important insights into its cytoskeletal composition, developmental stage, and health. While many force spectroscopy assays exist that allow probing of mechanics of bioparticles, most of them require immobilization of and direct contact with the particle and can only measure a single particle at a time. Here, we introduce quantitative acoustophoresis (QAP) as a simple alternative that uses an acoustic standing wave field to directly determine cellular compressibility and density of many cells simultaneously in a contact-free manner. First, using polymeric spheres of different sizes and materials, we verify that our assay data follow the standard acoustic theory with great accuracy. We furthermore verify that our technique not only is able to measure compressibilities of living cells but can also sense an artificial cytoskeleton inside a biomimetic vesicle. We finally provide a thorough discussion about the expected accuracy our approach provides. To conclude, we show that compared to existing methods, our QAP assay provides a simple yet powerful alternative to study the mechanics of biological and biomimetic particles.

Automated measurement of cell mechanical properties using an integrated dielectrophoretic microfluidic device

Cell mechanics is closely related to and interacts with cellular functions, which has the potential to be an effective biomarker to indicate disease onset and progression. Although several techniques have been developed for measuring cell mechanical properties, the issues of limited measurement data and biological significance because of complex and labor-intensive manipulation remain to be addressed, especially for the dielectrophoresis-based approach that is difficult to utilize flow measurement techniques. In this work, a dielectrophoresis-based solution is proposed to automatically obtain mass cellular mechanical data by combining a designed microfluidic device integrated the functions of cell capture, dielectrophoretic stretching, and cell release and an automatic control scheme. Experiments using human umbilical vein endothelial cells and breast cells revealed the automation capability of this device. The proposed method provides an effective way to address the low-throughput problem of dielectrophoresis-based cell mechanical property measurements, which enhance the biostatistical significance for cellular mechanism studies.

•

Cell capture, dielectrophoretic stretching, and release in one microfluidic chip

•

Automatic measurement scheme to realize circularly measurement

•

Automatic acquisition of large amounts of cell mechanical properties data

•

Significant advances in dielectrophoretic measurement of cell mechanical properties

Technologies for measuring red blood cell deformability

Human red blood cells (RBCs) are approximately 8 μm in diameter, but must repeatedly deform through capillaries as small as 2 μm in order to deliver oxygen to all parts of the body. The loss of this capability is associated with the pathology of many diseases, and is therefore a potential biomarker for disease status and treatment efficacy. Measuring RBC deformability is a difficult problem because of the minute forces (∼pN) that must be exerted on these cells, as well as the requirements for throughput and multiplexing. The development of technologies for measuring RBC deformability date back to the 1960s with the development of micropipette aspiration, ektacytometry, and the cell transit analyzer. In the past 10 years, significant progress has been made using microfluidics by leveraging the ability to precisely control fluid flow through microstructures at the size scale of individual RBCs. These technologies have now surpassed traditional methods in terms of sensitivity, throughput, consistency, and ease of use. As a result, these efforts are beginning to move beyond feasibility studies and into applications to enable biomedical discoveries. In this review, we provide an overview of both traditional and microfluidic techniques for measuring RBC deformability. We discuss the capabilities of each technique and compare their sensitivity, throughput, and robustness in measuring bulk and single-cell RBC deformability. Finally, we discuss how these tools could be used to measure changes in RBC deformability in the context of various applications including pathologies caused by malaria and hemoglobinopathies, as well as degradation during storage in blood bags prior to blood transfusions.

Single cell force spectroscopy of erythrocytes at physiological and febrile temperatures reveals mechano-modulatory effects of atorvastatin

RBCs are mechanically active cells and constantly deform as they circulate through vasculature. Their mechanical properties can be significantly altered by various pathophysiological conditions, and the alterations in RBC mechanics can, in turn, have functional consequences. Although numerous mechanical studies have been conducted on RBCs, surprisingly, strain-rate and temperature dependent mechanics of RBCs have not been systematically examined, and current data is primarily based on measurements at room temperature. Here, we have used state-of-the-art single-cell optical tweezers to probe atorvastatin-induced changes of RBC mechanics and its strain-rate dependency at physiologically and medically relevant temperatures. Our data indicate that RBC mechanics is strain-rate and temperature dependent, and atorvastatin treatment softens RBCs at physiological temperature, but not at febrile temperature. The observed mechanical change is a notable side effect of the drug in some therapeutic applications. However, the mechano-modulatory effects of atorvastatin on erythrocytes at physiological temperature might offer new therapeutic possibilities for diseases related to blood cell mechanics.

Shear-Stress-Gradient and Oxygen-Gradient Ektacytometry in Sickle Cell Patients at Steady State and during Vaso-Occlusive Crises

Oxygen gradient ektacytometry (oxygenscan) measures the changes in red blood cell (RBC) deformability in normoxia and during deoxygenation. We investigated the changes in RBC deformability, measured by both oxygenscan and classical shear-stress-gradient ektacytometry, in 10 patients with sickle cell disease (SCD) during vaso-occlusive crisis (VOC) versus steady state. Oxygenscan and shear-stress-gradient ektacytometry parameters were also measured in 38 SCD patients at steady state on two different occasions. Shear-stress-gradient ektacytometry parameters, maximal RBC deformability at normoxia and the minimum RBC deformability during deoxygenation were lower during VOC compared to steady state. The oxygen partial pressure at which RBCs started to sickle (PoS) was not significantly affected by VOC, but the results were very heterogeneous: the PoS increased in 5 in 10 patients and decreased in 4 in 10 patients. Both oxygenscan and shear-stress-gradient ektacytometry parameters remained unchanged in patients at steady state between two sets of measurements, performed at 17 ± 8 months intervals. In conclusion, the present study showed that both oxygen gradient ektacytometry and shear-stress-gradient ektacytometry are sensitive to disease activity in SCD, and that both techniques give comparable results; however, the oxygen-dependent propensity of RBCs to sickle was highly variable during VOC.

Multifunctional manipulation of red blood cells using optical tweezers

Serving as natural vehicles to deliver oxygen throughout the whole body, red blood cells (RBCs) have been regarded as important indicators for biomedical analysis and clinical diagnosis. Various diseases can be induced due to the dysfunction of RBCs. Hence, a flexible tool is required to perform precise manipulation and quantitative characterization of their physiological mechanisms and viscoelastic properties. Optical tweezers have emerged as potential candidates due to their noncontact manipulation and femtonewton-precision measurements. This review aimed to highlight the recent advances in the multifunctional manipulation of RBCs using optical tweezers, including controllable deformation, dynamic stretching, RBC aggregation, blood separation and Raman characterization. Further, great attentions have been focused on the precise assembly of functional biophotonics devices with trapped RBCs, and a brief overview was offered for the growing interests to manipulate RBCs in vivo.

Label-Free Morphological Phenotyping of In Vitro 3D Microtumors

By combining novel micro-scale manipulation cantilevers with commercially available, widely used 3D light microscopy, we were able to develop a new method of 3D elastography specialized for the analysis of 3D microtumors. Existing mechanical characterization methods are available for the study of single cells, using forces in the range of sub pN to a few hundred nN, or of larger tissues, with forces greater than 1 mN. Our method supports the mechanical analysis of micro- to meso-scale 3D tissues, such as multicellular spheroids (200-300 μm diameter), by applying forces in the range of sub-hundred nN to sub-mN, while also maintaining a spatial resolution of elasticity measurement as small as 20-30 μm. We use a differential interference contrast (DIC)/confocal microscope to obtain a 4D (x, y, z, and indentation steps) image sequence, which is then analyzed using our custom 3D pattern-tracking MATLAB program. With this method, we have been able to show structural and spatial heterogeneity among single cells and surrounding regions in tumor spheroids, and between different cell types in tumor-fibroblast co-cultured spheroids. Our method has the potential to both bridge the gap between in vitro monolayer culture systems and in vivo animal studies and add a mechanical component to existing biological assays.

Elastic property of sickle cell anemia and sickle cell trait red blood cells

SIGNIFICANCE

We introduce a model for better calibration of the trapping force using an equal but oppositely directed drag force acting on a trapped red blood cell (RBC). We demonstrate this approach by studying RBCs' elastic properties from deidentified sickle cell anemia (SCA) and sickle cell trait (SCT) blood samples.

AIM

A laser trapping (LT) force was formulated and analytically calculated in a cylindrical model. Using this trapping force relative percent difference, the maximum (longitudinal) and minimum (transverse) radius rate and stiffness were used to study the elasticity.

APPROACH

The elastic property of SCA and SCT RBCs was analyzed using LT technique with computer controlled piezo-driven stage, in order to trap and stretch the RBCs.

RESULTS

For all parameters, the results show that the SCT RBC samples have higher elastic property than the SCA RBCs. The higher rigidity in the SCA cell may be due to the lipid composition of the membrane, which was affected by the cholesterol concentration.

CONCLUSIONS

By developing a theoretical model for different trapping forces, we have also studied the elasticity of RBCs in SCT (with hemoglobin type HbAS) and in SCA (with hemoglobin type HbSS). The results for the quantities describing the elasticity of the cells consistently showed that the RBCs in the SCT display lower rigidity and higher deformability than the RBCs with SCA.

The method to quantify cell elasticity based on the precise measurement of pressure inducing cell deformation in microfluidic channels

The cell elasticity has attracted extensive research interests since it not only provides new insights into cell biology but also is an emerging mechanical marker for the diagnosis of some diseases. This paper reports the method for the precise measurement of mechanical properties of single cells deformed to a large extent using a novel microfluidic system integrated with a pressure feedback system and small particle separation unit. The particle separation system was employed to avoid the blockage of the cell deformation channel to enhance the measurement throughput. This system is of remarkable application potential in the precise evaluation of cell mechanical properties. In brief, this paper reports:•

The manufacturing of the chip using standard soft lithography;

•

The methods to deform single cells in a microchannel and measure the relevant pressure drop using a pressure sensor connecting to the microfluidic chip;

•

Calculation of the mechanical properties including stiffness and fluidity of each cell based on a power-law rheology model describing the viscoelastic behaviors of cells;

•

Automatic and real-time measurement of the mechanical properties using video processing software.

High-throughput microfluidic compressibility cytometry using multi-tilted-angle surface acoustic wave

Cellular mechanical properties (e.g. compressibility) are important biophysical markers in relation to cellular processes and functionality. Among the methods for cell mechanical measurement, acoustofluidic methods appear to be advantageous due to tunability, biocompatibility and acousto-mechanical nature. However, the previous acoustofluidic methods were limited in throughput and number of measurements. In this study, we developed a high-throughput microfluidic compressibility cytometry approach using multi-tilted-angle surface acoustic wave, which can provide thousands of single-cell compressibility measurements within minutes. The compressibility cytometer was constructed to drag microparticles or cells towards the microfluidic channel sidewall at different segments based on their biophysical properties (such as size and compressibility), as a result of the varied balance between acoustics and flow. Mathematical analysis and computational simulation revealed that the compressibility of a cell could be estimated from the position of collision with the sidewall. Microbeads of different materials and sizes were experimentally tested to validate the simulation and to demonstrate the capability to characterise size and compressibility. MDA MB231 cells, of the triple negative breast cancer subtype, were treated with the microtubule disrupting agent colchicine which increased compressibility and treated with the actin disrupting agent cytochalasin B which increased cell size but did not change compressibility. Moreover, the highly metastatic variant MDA MB231 LNm5 cell line showed increased compressibility compared to the parent MDA MB231 cells, indicating the potential utility of high-throughput mechanophenotyping for tumour cell characterisation.

Loading and relaxation dynamics of a red blood cell

We use mesoscale numerical simulations to investigate the unsteady dynamics of a single red blood cell (RBC) subjected to an external mechanical load. We carry out a detailed comparison between the loading (L) dynamics, following the imposition of the mechanical load on the RBC at rest, and the relaxation (R) dynamics, allowing the RBC to relax to its original shape after the sudden arrest of the mechanical load. Such a comparison is carried out by analyzing the characteristic times of the two corresponding dynamics, i.e., t_L and t_R. When the intensity of the mechanical load is small enough, the two kinds of dynamics are symmetrical (t_L≈t_R) and independent of the typology of mechanical load (intrinsic dynamics); otherwise, in marked contrast, an asymmetry is found, wherein the loading dynamics is typically faster than the relaxation one. This asymmetry manifests itself with non-universal characteristics, e.g., dependency on the applied load and/or on the viscoelastic properties of the RBC membrane. To deepen such a non-universal behaviour, we consider the viscosity of the erythrocyte membrane as a variable parameter and focus on three different typologies of mechanical load (mechanical stretching, shear flow, elongational flow): this allows to clarify how non-universality builds up in terms of the deformation and rotational contributions induced by the mechanical load on the membrane. Finally, we also investigate the effect of the elastic shear modulus on the characteristic times t_L and t_R. Our results provide crucial and quantitative information on the unsteady dynamics of RBC and its membrane response to the imposition/cessation of external mechanical loads.

Techniques for the Detection of Sickle Cell Disease: A Review

Sickle cell disease (SCD) is a widespread disease caused by a mutation in the beta-globin gene that leads to the production of abnormal hemoglobin called hemoglobin S. The inheritance of the mutation could be homozygous or heterozygous combined with another hemoglobin mutation. SCD can be characterized by the presence of dense, sickled cells that causes hemolysis of blood cells, anemia, painful episodes, organ damage, and in some cases death. Early detection of SCD can help to reduce the mortality and manage the disease effectively. Therefore, different techniques have been developed to detect the sickle cell disease and the carrier states with high sensitivity and specificity. These techniques can be screening tests such as complete blood count, peripheral blood smears, and sickling test; confirmatory tests such as hemoglobin separation techniques; and genetic tests, which are more expensive and need to be done in centralized labs by highly skilled personnel. However, advanced portable point of care techniques have been developed to provide a low-cost, simple, and user-friendly device for detecting SCD, for instance coupling solubility tests with portable devices, using smartphone microscopic classifications, image processing techniques, rapid immunoassays, and sensor-based platforms. This review provides an overview of the current and emerging techniques for sickle cell disease detection and highlights the different potential methods that could be applied to help the early diagnosis of SCD.

Determination of damping coefficient of soft tissues using piezoelectric transducer

Measuring viscoelastic properties of soft tissues becomes a new biomarker in the medical diagnosis field. It can help in early diagnosis and related fields, such as minimally-invasive-surgery (MIS) applications and cell mechanics. The current work presents a tactile sensor for measuring the damping coefficient of the soft tissues. The proposed sensor can be miniaturized easily and used in MIS applications. Besides the proposed sensor, a mathematical model, based on Jacobsen's approach, is built to calculate the damping coefficient of the specimens and the surrounding. These damping sources significantly influence the proposed sensor, such as air damping and hysteretic damping. The sensor system principally depends on a piezoelectric transducer, which is cheap, commonly available, and easily integrated into MEMS. To conceptually prove the sensor feasibility, silicon rubber samples with different stiffnesses have been fabricated and tested by the new sensor. The obtained results prove the newly proposed sensor's capability to differentiate the damping coefficients for soft materials effectively.

Effects of Red Blood Cell Sickling on Right Ventricular Afterload in vivo

BACKGROUND

Hemolysis in sickle cell disease (SCD) releases cell free hemoglobin, which scavenges nitric oxide (NO), leading to pulmonary vascular vasoconstriction, increased pulmonary vascular resistance (PVR), and the development of PH. However, PVR is only one component of right ventricular (RV) afterload. Whether sickled red blood cells increase the total RV afterload, including compliance and wave reflections, is unclear.

OBJECTIVE

Patients with SCD and pulmonary hypertension (PH) have a significantly increased risk of sudden death compared to patients with SCD alone. Sickled red blood cells (RBCs) are fragile and lyse easily. Here, we sought to determine the acute effects of SCD RBCs and increased cell free hemoglobin on RV afterload.

METHODS

Main pulmonary artery pressures and flows were measured in C57BL6 mice before and after exchanges of whole blood (~200 uL, Hct=45%) with an equal volume of SCD RBCs in plasma (Hct=45%) or cell free hemoglobin (Hb+) in solution. After transfusions, animals were additionally stressed with acute hypoxia (AH; 10% O2).

RESULTS

SCD RBCs increased PVR only compared to control RBCs; cell free hemoglobin increased PVR and wave reflections. These increases in RV afterload increased further with AH.

CONCLUSIONS

The release of cell free hemoglobin from fragile SCD RBCs in vivo increases the total RV afterload and may impair RV function more than the SCD RBCs themselves.

Quantitative absorption imaging of red blood cells to determine physical and mechanical properties

Red blood cells or erythrocytes, constituting 40 to 45 percent of the total volume of human blood are vesicles filled with hemoglobin with a fluid-like lipid bilayer membrane connected to a 2D spectrin network. The shape, volume, hemoglobin mass, and membrane stiffness of RBCs are important characteristics that influence their ability to circulate through the body and transport oxygen to tissues. In this study, we show that a simple two-LED set up in conjunction with standard microscope imaging can accurately determine the physical and mechanical properties of single RBCs. The Beer–Lambert law and undulatory motion dynamics of the membrane have been used to measure the total volume, hemoglobin mass, membrane tension coefficient, and bending modulus of RBCs. We also show that this method is sensitive enough to distinguish between the mechanical properties of RBCs during morphological changes from a typical discocyte to echinocytes and spherocytes. Measured values of the tension coefficient and bending modulus are 1.27 × 10⁻⁶ J m⁻² and 7.09 × 10⁻²⁰ J for discocytes, 4.80 × 10⁻⁶ J m⁻² and 7.70 × 10⁻²⁰ J for echinocytes, and 9.85 × 10⁻⁶ J m⁻² and 9.69 × 10⁻²⁰ J for spherocytes, respectively. This quantitative light absorption imaging reduces the complexity related to the quantitative imaging of the biophysical and mechanical properties of a single RBC that may lead to enhanced yet simplified point of care devices for analyzing blood cells.

The constant thickness in the microfluidic channel is used for controlled absorption of red and blue light to measure red blood cell hemoglobin and height mapping. High speed recording of the height mapping provides us the membrane fluctuation.

Cell elasticity measurement using a microfluidic device with real-time pressure feedback

The study of cell elasticity provides new insights into not only cell biology but also disease diagnosis based on cell mechanical state variation. Microfluidic technologies have made noticeable progress in studying cell deformation with capabilities of high throughput and automation. This paper reports the development of a novel microfluidic system to precisely measure the elasticity of cells having large deformation in a constriction channel. It integrated i) a separation unit to isolate rod- or flake-shaped particles that might block the constriction channel to increase the measurement throughput and ii) a pressure feedback system precisely detecting the pressure drop inducing the deformation of each cell. The fluid dynamics of the separation unit was modeled to understand the separation mechanism before the experimental determination of separation efficiency. Afterward, the pressure system was characterized to demonstrate its sensitivity and reproducibility in measuring the subtle pressure drop along a constriction channel. Finally, the microfluidic system was employed to study the stiffness of both K562 and endothelial cells. The cell protrusion and pressure drop were employed to calculate the mechanical properties based on a power-law rheology model describing the viscoelastic behaviors of cells. Both the stiffness and the fluidity of K562 and endothelial cells were consistent with those in previous studies. The system has remarkable application potential in the precise evaluation of cell mechanical properties.

Label-free on chip quality assessment of cellular blood products using real-time deformability cytometry

Without cellular blood products such as platelet concentrates (PC), red blood cell concentrates (RCC), and hematopoietic stem cells (HPSC) modern treatments in medicine would not be possible. An unresolved challenge is the assessment of their quality with minimal cell manipulation. Minor changes in production, storage conditions, or blood bag composition may impact cell function, which can have important consequences on product integrity. This is especially relevant for personalized medicine, such as autologous T-cell therapy. Today a robust methodology that globally determines cell status directly before transfusion or transplantation is lacking. We demonstrate that measuring viscoelastic characteristics of peripheral blood cells using real-time deformability cytometry (RT-DC) provides comprehensive information on product quality, which is not accessible using conventional quality control tests. In addition, RT-DC requires few cells, a minimal sample volume and has a rapid turnaround time. We compared RT-DC to standard in vitro quality assays assessing: i) PC after storage at 4 °C and room temperature; ii) magnetic nanoparticle labeled platelets; iii) RCC stored in blood bags with different plasticizers; iv) RCC after gamma irradiation; and v) HPSC after cryopreservation with 5% or 10% dimethyl sulfoxide, respectively. Additionally, we evaluated the engraftment time of patients' platelets and leukocytes after transplantation of HPSC products. Our results demonstrate that label-free mechano-phenotyping can be used as a potential biomarker for quality assessment of cell-based pharmaceutical products.

Methodological aspects and pharmacological applications of three-dimensional cancer cell cultures and organoids

Two-dimensional (2D) cell cultures, in which cells grow in flat layers on plastic surfaces, are considered the standard model for use in drug screening and for biological assays. However, these models do not accurately represent in vivo cell organization due to a lack in cell-cell/matrix interactions and in tissue and microenvironment structure. For that reason, three-dimensional (3D) cell cultures have been introduced as an innovative platform in recent years, allowing cells to grow and interact with each other in all three dimensions thanks to an artificial environment. In a 3D model cells show more interesting aspects from a physiological point of view, demonstrating several improvements in viability, morphology, proliferation and differentiations, response to external and internal stimuli, drug metabolism and efficacy and in vivo relevance. This review explores recent techniques in the development of 3D cell models with a particular focus on their application from a pharmacological point of view, starting from the concept of spheroid models generated by scaffold-free or scaffold-based techniques. Finally, special attention is paid to the concept of organoids, 3D constructs that replicate the 3D architecture of intact organs and the technology involved.

Optical Tweezers in Studies of Red Blood Cells

Optical tweezers (OTs) are innovative instruments utilized for the manipulation of microscopic biological objects of interest. Rapid improvements in precision and degree of freedom of multichannel and multifunctional OTs have ushered in a new era of studies in basic physical and chemical properties of living tissues and unknown biomechanics in biological processes. Nowadays, OTs are used extensively for studying living cells and have initiated far-reaching influence in various fundamental studies in life sciences. There is also a high potential for using OTs in haemorheology, investigations of blood microcirculation and the mutual interplay of blood cells. In fact, in spite of their great promise in the application of OTs-based approaches for the study of blood, cell formation and maturation in erythropoiesis have not been fully explored. In this review, the background of OTs, their state-of-the-art applications in exploring single-cell level characteristics and bio-rheological properties of mature red blood cells (RBCs) as well as the OTs-assisted studies on erythropoiesis are summarized and presented. The advance developments and future perspectives of the OTs' application in haemorheology both for fundamental and practical in-depth studies of RBCs formation, functional diagnostics and therapeutic needs are highlighted.

An optofluidic "tweeze-and-drag" cell stretcher in a microfluidic channel

The mechanical properties of biological cells are utilized as an inherent, label-free biomarker to indicate physiological and pathological changes of cells. Although various optical and microfluidic techniques have been developed for cell mechanical characterization, there is still a strong demand for non-contact and continuous methods. Here, by combining optical and microfluidic techniques in a single desktop platform, we demonstrate an optofluidic cell stretcher based on a "tweeze-and-drag" mechanism using a periodically chopped, tightly focused laser beam as an optical tweezer to trap a cell temporarily and a flow-induced drag force to stretch the cell in a microfluidic channel transverse to the tweezer. Our method leverages the advantages of non-contact optical forces and a microfluidic flow for both cell stretching and continuous cell delivery. We demonstrate the stretcher for mechanical characterization of rabbit red blood cells (RBCs), with a throughput of ∼1 cell per s at a flow rate of 2.5 μl h^-1 at a continuous-wave laser power of ∼25 mW at a wavelength of 1064 nm (chopped at 2 Hz). We estimate the spring constant of RBCs to be ∼14.9 μN m^-1. Using the stretcher, we distinguish healthy RBCs and RBCs treated with glutaraldehyde at concentrations of 5 × 10^-4% to 2.5 × 10^-3%, with a strain-to-concentration sensitivity of ∼-1529. By increasing the optical power to ∼45 mW, we demonstrate cell-stretching under a higher flow rate of 4 μl h^-1, with a higher throughput of ∼1.5 cells per s and a higher sensitivity of ∼-2457. Our technique shows promise for applications in the fields of healthcare monitoring and biomechanical studies.

Human red blood cell behaviour in hydroxyethyl starch: probed by single cell spectroscopy

Hydroxyethyl starch (HES) is a commonly used intravenous fluid in hospital settings. The merits and demerits of its application is still a debatable topic. Investigating the interaction of external agents like intravenous fluids with blood cells is of great significance in clinical environments. Micro-Raman spectroscopy combined with an optical tweezers technique has been utilized for conducting systematic investigations of single live red blood cells (RBCs) under the influence of external stress agents. The present work deals with a detailed biophysical study on the response of human live red blood cells in hydroxyethyl starch using optical techniques. Morphological changes in red blood cells were monitored using quantitate phase imaging techniques. Micro-Raman studies suggest that there is a significant reduction in the oxy-haemoglobin level in red blood cells suspended in HES. The spectra recorded by using different probe laser powers has shown that the cells are more vulnerable in HES under the influence of externally induced stress than in blood plasma. In addition, the spectral results support the possibility of heme aggregation and membrane damage for red blood cells in HES under externally induced stress. Principle component analysis performed on the Raman spectra were able to effectively discriminate between red blood cells in HES and in blood plasma. The use of Raman tweezers can be highly beneficial in elucidating biochemical alterations happening in live, human red blood cell.

Hydroxyethyl starch (HES) is a commonly used intravenous fluid in hospital settings.

Evaluating viscoelastic properties and membrane electrical charges of red blood cells with optical tweezers and cationic quantum dots - applications to β-thalassemia intermedia hemoglobinopathy

Biomechanical and electrical properties are important to the performance and survival of red blood cells (RBCs) in the microcirculation. This study proposed and explored methodologies based on optical tweezers and cationic quantum dots (QDs) as biophotonic tools to characterize, in a complementary way, viscoelastic properties and membrane electrical charges of RBCs. The methodologies were applied to normal (HbA) and β-thalassemia intermedia (Hbβ) RBCs. The β-thalassemia intermedia disease is a hereditary hemoglobinopathy characterized by a reduction (or absence) of β-globin chains, which leads to α-globin chains precipitation. The apparent elasticity (μ) and membrane viscosity (η_m) of RBCs captured by optical tweezers were obtained in just a single experiment. Besides, the membrane electrical charges were evaluated by flow cytometry, exploring electrostatic interactions between cationic QDs, stabilized with cysteamine, with the negatively charged RBC surfaces. Results showed that Hbβ RBCs are less elastic, have a higher η_m, and presented a reduction in membrane electrical charges, when compared to HbA RBCs. Moreover, the methodologies based on optical tweezers and QDs, here proposed, showed to be capable of providing a deeper and integrated comprehension on RBC rheological and electrical changes, resulting from diverse biological conditions, such as the β-thalassemia intermedia hemoglobinopathy.

Structural characterization of the saxitoxin-targeting APTSTX1 aptamer using optical tweezers and molecular dynamics simulations

Optical tweezers have enabled the exploration of picoNewton forces and dynamics in single-molecule systems such as DNA and molecular motors. In this work, we used optical tweezers to study the folding/unfolding dynamics of the APTSTX1-aptamer, a single-stranded DNA molecule with high affinity for saxitoxin (STX), a lethal neurotoxin. By measuring the transition force during (un)folding processes, we were able to characterize and distinguish the conformational changes of this aptamer in the presence of magnesium ions and toxin. This work was supported by molecular dynamics (MD) simulations to propose an unfolding mechanism of the aptamer-Mg+2 complex. Our results are a step towards the development of new aptamer-based STX sensors that are potentially cheaper and more sensitive than current alternatives.

Engineering approaches for characterizing soft tissue mechanical properties: A review

From cancer diagnosis to detailed characterization of arterial wall biomechanics, the elastic property of tissues is widely studied as an early sign of disease onset. The fibrous structural features of tissues are a direct measure of its health and functionality. Alterations in the structural features of tissues are often manifested as local stiffening and are early signs for diagnosing a disease. These elastic properties are measured ex vivo in conventional mechanical testing regimes, however, the heterogeneous microstructure of tissues can be accurately resolved over relatively smaller length scales with enhanced spatial resolution using techniques such as micro-indentation, microelectromechanical (MEMS) based cantilever sensors and optical catheters which also facilitate in vivo assessment of mechanical properties. In this review, we describe several probing strategies (qualitative and quantitative) based on the spatial scale of mechanical assessment and also discuss the potential use of machine learning techniques to compute the mechanical properties of soft tissues. This work details state of the art advancement in probing strategies, associated challenges toward quantitative characterization of tissue biomechanics both from an engineering and clinical standpoint.

Clarification of fast metal sphere movement in glass

In this study, metal spheres were implanted into glass by continuous-wave (CW) laser illumination, which manipulated the metal sphere inside the glass. The spheres moved at approximately 100 mm/s, which is 100 times faster compared to conventional movement. The movement mechanism was clarified by in situ, cross-sectional, and microscopic observations. With a high laser power density, the metal spheres moved fast with plasma emission, and their trajectory contained fine iron particles. The temperatures of the metal sphere with slow (<0.1 mm/s) and fast (>1 mm/s) speeds were 1,900 and 2,900 K, respectively.

On-chip cell mechanophenotyping using phase modulated surface acoustic wave

A surface acoustic wave (SAW) microfluidic chip was designed to measure the compressibility of cells and to differentiate cell mechanophenotypes. Polystyrene microbeads and poly(methylmethacrylate) (PMMA) microbeads were first tested in order to calibrate and validate the acoustic field. We observed the prefocused microbeads being pushed into the new pressure node upon phase shift. The captured trajectory matched well with the equation describing acoustic radiation force. The compressibility of polystyrene microbeads and that of PMMA microbeads was calculated, respectively, by fitting the trajectory from the experiment and that simulated by the equation across a range of compressibility values. Following, A549 human alveolar basal epithelial cells (A549 cells), human airway smooth muscle (HASM) cells, and MCF-7 breast cancer cells were tested using the same procedure. The compressibility of each cell from the three cell types was measured also by fitting trajectories between the experiment and that from the equation; the size was measured by image analysis. A549 cells were more compressible than HASM and MCF-7 cells; HASM cells could be further distinguished from MCF-7 cells by cell size. In addition, MCF-7 cells were treated by colchicine and 2-methoxyestradiol to disrupt the cell microtubules and were found to be more compressible. Computer simulation was also carried out to investigate the effect of cell compressibility and cell size due to acoustic radiation force to examine the sensitivity of the measurement. The SAW microfluidic method is capable of differentiating cell types or cells under different conditions based on the cell compressibility and the cell size.

Distinct relaxation timescales of neurites revealed by rate-dependent indentation, relaxation and micro-rheology tests

Although the dynamic response of neurites is believed to play crucial roles in processes like axon outgrowth and formation of the neural network, the dynamic mechanical properties of such protrusions remain poorly understood. In this study, by using AFM (atomic force microscopy) indentation, we systematically examined the dynamic behavior of well-developed neurites on primary neurons under different loading modes (step loading, oscillating loading and ramp loading). Interestingly, the response was found to be strongly rate-dependent, with an apparent initial and long-term elastic modulus around 800 and 80 Pa, respectively. To better analyze the measurement data and extract information of key interest, the finite element simulation method (FEM) was also conducted where the neurite was treated as a viscoelastic solid consisting of multiple characteristic relaxation times. It was found that a minimum of three relaxation timescales, i.e. ∼0.01, 0.1 and 1 seconds, are needed to explain the observed relaxation curve as well as fit simulation results to the indentation and rheology data under different loading rates and driving frequencies. We further demonstrated that these three characteristic relaxation times likely originate from the thermal fluctuations of the microtubule, membrane relaxation and cytosol viscosity, respectively. By identifying key parameters describing the time-dependent behavior of neurites, as well as revealing possible physical mechanisms behind, this study could greatly help us understand how neural cells perform their biological duties over a wide spectrum of timescales.

Altered blood rheology and impaired pressure-induced cutaneous vasodilation in a mouse model of combined type 2 diabetes and sickle cell trait

OBJECTIVE

Type 2 diabetes (T2D)-related vascular dysfunction and hemorheological abnormalities could possibly be amplified by sickle cell trait (SCT). These alterations could potentially increase the risk of vascular complications in individuals with combined T2D and SCT. Therefore, this study used a mouse model to determine whether vascular function and blood rheology were more severely altered in combined T2D and SCT than in T2D or SCT alone.

METHODS

Townes transgenic mice with or without SCT received a 12-week high fat high sucrose or standard diet to create models of combined T2D-SCT, T2D, SCT, and controls. Pressure-induced vasodilation (PIV) and sodium nitroprusside (SNP)-mediated vasodilation in-vivo, and hemorheological parameters were measured.

RESULTS

No significant differences in blood viscosity, hematocrit, erythrocyte deformability, or PIV were observed between the control and T2D mice, or the control and SCT mice. However, blood viscosity, erythrocyte deformability, and PIV were significantly altered in the T2D-SCT mice compared to the control mice. There were no differences in SNP response between the groups.

CONCLUSIONS

Although neither T2D nor SCT alone had significant effects on blood rheology parameters or vascular function, combined T2D-SCT mice had significantly altered blood rheology and significantly impaired vascular function.

Synergistic Integration of Laboratory and Numerical Approaches in Studies of the Biomechanics of Diseased Red Blood Cells

In red blood cell (RBC) disorders, such as sickle cell disease, hereditary spherocytosis, and diabetes, alterations to the size and shape of RBCs due to either mutations of RBC proteins or changes to the extracellular environment, lead to compromised cell deformability, impaired cell stability, and increased propensity to aggregate. Numerous laboratory approaches have been implemented to elucidate the pathogenesis of RBC disorders. Concurrently, computational RBC models have been developed to simulate the dynamics of RBCs under physiological and pathological conditions. In this work, we review recent laboratory and computational studies of disordered RBCs. Distinguished from previous reviews, we emphasize how experimental techniques and computational modeling can be synergically integrated to improve the understanding of the pathophysiology of hematological disorders.

Nitric oxide in red blood cell adaptation to hypoxia

Nitric oxide (NO) appears to be involved in virtually every aspect of cardiovascular biology. Most attention has been focused on the role of endothelial-derived NO in basal blood flow regulation by relaxing vascular smooth muscle; however, it is now known that NO derived from red blood cells (RBCs) plays a fundamental role in vascular homeostasis by enhancing oxygen (O2) release at the cellular and physiological level. Hypoxia is an often seen problem in diverse conditions; systemic adaptations to hypoxia permit people to adjust to the hypoxic environment at high altitudes and to disease processes. In addition to the cardiopulmonary and hematologic adaptations that support systemic O2 delivery in hypoxia, RBCs assist through newly described NO-based mechanisms, in line with their vital role in O2 transport and delivery. Furthermore, to increase the local blood flow in proportion to metabolic demand, NO regulates membrane mechanical properties thereby modulating RBC deformability and O2 carrying-releasing function. In this review article, we focus on the effect of NO bioactivity on RBC-based mechanisms that regulate blood flow and RBC deformability. RBC adaptations to hypoxia are summarized, with particular attention to NO-dependent S-nitrosylation of membrane proteins and hemoglobin (S-nitrosohemoglobin). The NO/S-nitrosylation/RBC vasoregulatory cascade contributes fundamentally to the molecular understanding of the role of NO in human adaptation to hypoxia and may inform novel therapeutic strategies.

Laser trap ionization for identification of human erythrocytes with variable hemoglobin quantitation

An approach to an established technique that is potentially applicable for a more comprehensive understanding of the electrical properties of red blood cells (RBCs) is presented. Using a high-intensity gradient laser trap, RBCs can be singly trapped and consequentially ionized. The subsequent dynamics of the ionized cell allows one to calculate the charge developed and the ionization energy (IE) through a Newtonian-based analysis. RBCs with two different hemoglobin (Hb) types were ionized. The first sample was identified as carrying Hb HbAA (normal Hb) and the second one was identified as carrying HbAC (HbC trait). By analyzing the charge developed on each cell and several other related factors, we were able to discern a difference between the main Hb types contained within the individual RBC, independent of cell size. A relationship between the charge developed and the IE of the cell was also established based on the electrical properties of RBCs. Thus, we present this laser trapping technique as a study of the electrical properties of RBCs and as possible biomedical tool to be used for the differentiation of Hb types.

Opto-acoustic microscopy reveals adhesion mechanics of single cells

Laser-generated GHz-ultrasonic-based technologies have shown the ability to image single cell adhesion and stiffness simultaneously. Using this new modality, we here demonstrate quantitative indicators to investigate contact mechanics and adhesion processes of the cell. We cultured human cells on a rigid substrate, and we used an inverted pulsed opto-acoustic microscope to generate acoustic pulses containing frequencies up to 100 GHz in the substrate. We map the reflection of the acoustic pulses at the cell-substrate interface to obtain images of the acoustic impedance of the cell, Z_c, as well as of the stiffness of the interface, K, with 1 μm lateral resolution. Our results show that the standard deviation ΔZ_c reveals differences between different cell types arising from the multiplicity of local conformations within the nucleus. From the distribution of K-values within the nuclear region, we extract a mean interfacial stiffness, K_m, that quantifies the average contact force in areas of the cell displaying weak bonding. By analogy with classical contact mechanics, we also define the ratio of the real to nominal contact areas, S_r/S_t. We show that K_m can be interpreted as a quantitative indicator of passive contact at metal-cell interfaces, while S_r/S_t is sensitive to active adhesive processes in the nuclear region. The ability to separate the contributions of passive and active adhesion processes should allow gaining insight into cell-substrate interactions, with important applications in tissue engineering.

Stiffness analysis of 3D spheroids using microtweezers

We describe a novel mechanical characterization method that has directly measured the stiffness of cancer spheroids for the first time to our knowledge. Stiffness is known to be a key parameter that characterizes cancerous and normal cells. Atomic force microscopy or optical tweezers have been typically used for characterization of single cells with the measurable forces ranging from sub pN to a few hundred nN, which are not suitable for measurement of larger 3D cellular structures such as spheroids, whose mechanical characteristics have not been fully studied. Here, we developed microtweezers that measure forces from sub hundred nN to mN. The wide force range was achieved by the use of replaceable cantilevers fabricated from SU8, and brass. The chopstick-like motion of the two cantilevers facilitates easy handling of samples and microscopic observation for mechanical characterization. The cantilever bending was optically tracked to find the applied force and sample stiffness. The efficacy of the method was demonstrated through stiffness measurement of agarose pillars with known concentrations. Following the initial system evaluation with agarose, two cancerous (T47D and BT474) and one normal epithelial (MCF 10A) breast cell lines were used to conduct multi-cellular spheroid measurements to find Young’s moduli of 230, 420 and 1250 Pa for BT474, T47D, and MCF 10A, respectively. The results showed that BT474 and T47D spheroids are six and three times softer than epithelial MCF10A spheroids, respectively. Our method successfully characterized samples with wide range of Young’s modulus including agarose (25–100 kPa), spheroids of cancerous and non-malignant cells (190–200 μm, 230–1250 Pa) and collagenase-treated spheroids (215 μm, 130 Pa).

Mesoscopic Adaptive Resolution Scheme toward Understanding of Interactions between Sickle Cell Fibers

Understanding of intracellular polymerization of sickle hemoglobin (HbS) and subsequent interaction with the membrane of a red blood cell (RBC) is important to predict the altered morphologies and mechanical properties of sickle RBCs in sickle cell anemia. However, modeling the integrated processes of HbS nucleation, polymerization, HbS fiber interaction, and subsequent distortion of RBCs is challenging as they occur at multispatial scales, ranging from nanometers to micrometers. To make progress toward simulating the integrated processes, we propose a hybrid HbS fiber model, which couples fine-grained and coarse-grained HbS fiber models through a mesoscopic adaptive resolution scheme (MARS). To this end, we apply a microscopic model to capture the dynamic process of polymerization of HbS fibers, while maintaining the mechanical properties of polymerized HbS fibers by the mesoscopic model, thus providing a means of bridging the subcellular and cellular phenomena in sickle cell disease. At the subcellular level, this model can simulate HbS polymerization with preexisting HbS nuclei. At the cellular level, if combined with RBC models, the generated HbS fibers could be applied to study the morphologies and membrane stiffening of sickle RBCs. One important feature of the MARS is that it can be easily employed in other particle-based multiscale simulations where a dynamic coarse-graining and force-blending method is required. As demonstrations, we first apply the hybrid HbS fiber model to simulate the interactions of two growing fibers and find that their final configurations depend on the orientation and interaction distance between two fibers, in good agreement with experimental observations. We also model the formation of fiber bundles and domains so that we explore the mechanism that causes fiber branching.

Characterization of biomechanical properties of cells through dielectrophoresis-based cell stretching and actin cytoskeleton modeling

Background

Cytoskeleton is a highly dynamic network that helps to maintain the rigidity of a cell, and the mechanical properties of a cell are closely related to many cellular functions. This paper presents a new method to probe and characterize cell mechanical properties through dielectrophoresis (DEP)-based cell stretching manipulation and actin cytoskeleton modeling.

Methods

Leukemia NB4 cells were used as cell line, and changes in their biological properties were examined after chemotherapy treatment with doxorubicin (DOX). DEP-integrated microfluidic chip was utilized as a low-cost and efficient tool to study the deformability of cells. DEP forces used in cell stretching were first evaluated through computer simulation, and the results were compared with modeling equations and with the results of optical stretching (OT) experiments. Structural parameters were then extracted by fitting the experimental data into the actin cytoskeleton model, and the underlying mechanical properties of the cells were subsequently characterized.

Results

The DEP forces generated under different voltage inputs were calculated and the results from different approaches demonstrate good approximations to the force estimation. Both DEP and OT stretching experiments confirmed that DOX-treated NB4 cells were stiffer than the untreated cells. The structural parameters extracted from the model and the confocal images indicated significant change in actin network after DOX treatment.

Conclusion

The proposed DEP method combined with actin cytoskeleton modeling is a simple engineering tool to characterize the mechanical properties of cells.

Red Blood Cell Responses during a Long-Standing Load in a Microfluidic Constriction

Red blood cell responses during a long-standing load were experimentally investigated. With a high-speed camera and a high-speed actuator, we were able to manipulate cells staying inside a microfluidic constriction, and each cell was compressed due to the geometric constraints. During the load inside the constriction, the color of the cells was found to gradually darken, while the cell lengths became shorter and shorter. According to the analysis results of a 5 min load, the average increase of the cell darkness was 60.9 in 8-bit color resolution, and the average shrinkage of the cell length was 15% of the initial length. The same tendency was consistently observed from cell to cell. A correlation between the changes of the color and the length were established based on the experimental results. The changes are believed partially due to the viscoelastic properties of the cells that the cells’ configurations change with time for adapting to the confined space inside the constriction.