Visualization of ordered genomic RNA and localization of transcriptional complexes in rotavirus

Reverse genetic engineering of simian rotaviruses with temperature-sensitive lesions in VP1, VP2, and VP6

Rotaviruses are 11-segmented double-stranded RNA viruses and important causes of acute gastroenteritis in young children. To investigate the functions of specific viral proteins during the rotavirus lifecycle, temperature-sensitive (ts) mutants were previously created using a cultivatable simian strain (SA11) and chemical mutagenesis. These ts SA11 mutants replicate more efficiently at the permissive temperature of 31 °C than at the non-permissive temperature of 39 °C. Prototype strains SA11-tsC, SA11-tsF, and SA11-tsG were mapped to the genes encoding structural proteins VP1, VP2, and VP6, respectively, and putative ts lesions were identified using Sanger sequencing. However, additional background mutations in their genomes had hampered validation of the ts lesions and confounded their use in mechanistic studies. Here, we employed plasmid only-based reverse genetics to engineer recombinant (r) SA11 rotaviruses containing only the putative ts lesions of SA11-tsC (L138P change in VP1), SA11-tsF (A387D change in VP2) or SA11-tsG (S10T, D13H, and A121G changes in VP6). For simplicity, we refer to these newly-engineered, isogenic viruses as rSA11-tsVP1, rSA11-tsVP2, and rSA11-tsVP6. Single-cycle growth assays revealed that these mutants indeed exhibit ts phenotypes with significantly diminished titers (>1.5-logs) at 39 °C versus 31 °C. The rSA11 ts mutants proved genetically stable at the population-level following 3 sequential passages at 39 °C, but individual revertant clones were detected in plaque assays. Heat sensitivity experiments showed that pre-incubation of rSA11-tsVP1 or rSA11-tsVP2, but not rSA11-tsVP6, at 39 °C diminished replication at 31 °C. This result indicates that the ts lesions in VP1 and VP2 affect the incoming virion but those in VP6 affect a later stage of the viral lifecycle. In silico molecular dynamics simulations predicted temperature-dependent, long-range effects of the S10T, D13H, and/or A121G changes on the VP6 structure. Altogether, our results confirm the ts lesions of the original SA11-tsC, SA11-tsF, and SA11-tsG mutants, provide a new set of isogenic strains for investigating aspects of rotavirus replication, and shed light on how the ts lesions might impact VP1, VP2, or VP6 functions.

A Perfect Ten-Decoy Maps Uncover Polymerase Complexes within Reoviridae Virion

In this issue of Structure, Kaelber et al. (2020) use cryo-EM and synthetic decoy maps to reveal the patterning of 10 polymerase complexes within FAKV, a Reoviridae family member containing 9 genome segments. Their findings support a model for FAKV assembly that has implications for the entire Reoviridae family.

Pressurized DNA state inside herpes capsids-A novel antiviral target

Drug resistance in viruses represents one of the major challenges of healthcare. As part of an effort to provide a treatment that avoids the possibility of drug resistance, we discovered a novel mechanism of action (MOA) and specific compounds to treat all nine human herpesviruses and animal herpesviruses. The novel MOA targets the pressurized genome state in a viral capsid, "turns off" capsid pressure, and blocks viral genome ejection into a cell nucleus, preventing viral replication. This work serves as a proof-of-concept to demonstrate the feasibility of a new antiviral target-suppressing pressure-driven viral genome ejection-that is likely impervious to developing drug resistance. This pivotal finding presents a platform for discovery of a new class of broad-spectrum treatments for herpesviruses and other viral infections with genome-pressure-dependent replication. A biophysical approach to antiviral treatment such as this is also a vital strategy to prevent the spread of emerging viruses where vaccine development is challenged by high mutation rates or other evasion mechanisms.

Overview of the Development, Impacts, and Challenges of Live-Attenuated Oral Rotavirus Vaccines

Safety, efficacy, and cost-effectiveness are paramount to vaccine development. Following the isolation of rotavirus particles in 1969 and its evidence as an aetiology of severe dehydrating diarrhoea in infants and young children worldwide, the quest to find not only an acceptable and reliable but cost-effective vaccine has continued until now. Four live-attenuated oral rotavirus vaccines (LAORoVs) (Rotarix^®, RotaTeq^®, Rotavac^®, and RotaSIIL^®) have been developed and licensed to be used against all forms of rotavirus-associated infection. The efficacy of these vaccines is more obvious in the high-income countries (HIC) compared with the low- to middle-income countries (LMICs); however, the impact is far exceeding in the low-income countries (LICs). Despite the rotavirus vaccine efficacy and effectiveness, more than 90 countries (mostly Asia, America, and Europe) are yet to implement any of these vaccines. Implementation of these vaccines has continued to suffer a setback in these countries due to the vaccine cost, policy, discharging of strategic preventive measures, and infrastructures. This review reappraises the impacts and effectiveness of the current live-attenuated oral rotavirus vaccines from many representative countries of the globe. It examines the problems associated with the low efficacy of these vaccines and the way forward. Lastly, forefront efforts put forward to develop initial procedures for oral rotavirus vaccines were examined and re-connected to today vaccines.

Arrangement of the Polymerase Complexes inside a Nine-Segmented dsRNA Virus

Members of the family Reoviridae package several copies of the viral polymerase complex into their capsid to carry out replication and transcription within viral particles. Classical single-particle reconstruction encounters difficulties resolving structures such as the intraparticle polymerase complex because refinement can converge to an incorrect map and because the map could depict a nonrepresentative subset of particles or an average of heterogeneous particles. Using the nine-segmented Fako virus, we tested hypotheses for the arrangement and number of polymerase complexes within the virion by measuring how well each hypothesis describes the set of cryoelectron microscopy images of individual viral particles. We find that the polymerase complex in Fako virus binds at ten possible sites despite having only nine genome segments. A single asymmetric configuration describes the arrangement of these complexes in both virions and genome-free capsids. Similarities between the arrangements of Reoviridae with 9, 10, and 11 segments indicate the generalizability of this architecture.

In Vitro Double-Stranded RNA Synthesis by Rotavirus Polymerase Mutants with Lesions at Core Shell Contact Sites

The rotavirus polymerase VP1 mediates all stages of viral RNA synthesis within the confines of subviral particles and while associated with the core shell protein VP2. Transcription (positive-strand RNA [+RNA] synthesis) by VP1 occurs within double-layered particles (DLPs), while genome replication (double-stranded RNA [dsRNA] synthesis) by VP1 occurs within assembly intermediates. VP2 is critical for VP1 enzymatic activity; yet, the mechanism by which the core shell protein triggers polymerase function remains poorly understood. Structural analyses of transcriptionally competent DLPs show that VP1 is located beneath the VP2 core shell and sits slightly off-center from each of the icosahedral 5-fold axes. In this position, the polymerase is contacted by the core shell at 5 distinct surface-exposed sites, comprising VP1 residues 264 to 267, 547 to 550, 614 to 620, 968 to 980, and 1022 to 1025. Here, we sought to test the functional significance of these VP2 contact sites on VP1 with regard to polymerase activity. We engineered 19 recombinant VP1 (rVP1) proteins that contained single- or multipoint alanine mutations within each individual contact site and assayed them for the capacity to synthesize dsRNA in vitro in the presence of rVP2. Three rVP1 mutants (E265A/L267A, R614A, and D971A/S978A/I980A) exhibited diminished in vitro dsRNA synthesis. Despite their loss-of-function phenotypes, the mutants did not show major structural changes in silico, and they maintained their overall capacity to bind rVP2 in vitro via their nonmutated contact sites. These results move us toward a mechanistic understanding of rotavirus replication and identify precise VP2-binding sites on the polymerase surface that are critical for its enzymatic activation.IMPORTANCE Rotaviruses are important pathogens that cause severe gastroenteritis in the young of many animals. The viral polymerase VP1 mediates all stages of viral RNA synthesis, and it requires the core shell protein VP2 for its enzymatic activity. Yet, there are several gaps in knowledge about how VP2 engages and activates VP1. Here, we probed the functional significance of 5 distinct VP2 contact sites on VP1 that were revealed through previous structural studies. Specifically, we engineered alanine amino acid substitutions within each of the 5 VP1 regions and assayed the mutant polymerases for the capacity to synthesize RNA in the presence of VP2 in a test tube. Our results identified residues within 3 of the VP2 contact sites that are critical for robust polymerase activity. These results are important because they enhance the understanding of a key step of the rotavirus replication cycle.

Pressure-driven release of viral genome into a host nucleus is a mechanism leading to herpes infection

Many viruses previously have been shown to have pressurized genomes inside their viral protein shell, termed the capsid. This pressure results from the tight confinement of negatively charged viral nucleic acids inside the capsid. However, the relevance of capsid pressure to viral infection has not been demonstrated. In this work, we show that the internal DNA pressure of tens of atmospheres inside a herpesvirus capsid powers ejection of the viral genome into a host cell nucleus. To our knowledge, this provides the first demonstration of a pressure-dependent mechanism of viral genome penetration into a host nucleus, leading to infection of eukaryotic cells.

Cryo-EM Reveals Architectural Diversity in Active Rotavirus Particles

Rotavirus is a well-studied RNA virus that causes severe gastroenteritis in children. During viral entry, the outer layer of the virion is shed, creating a double-layered particle (DLP) that is competent to perform viral transcription (i.e., mRNA synthesis) and launch infection. While inactive forms of rotavirus DLPs have been structurally characterized in detail, information about the transcriptionally-active DLP remains limited. Here, we used cryo-Electron Microscopy (cryo-EM) and 3D image reconstructions to compare the structures of internal protein components in transcriptionally-active versus inactive DLPs. Our findings showed that transcriptionally-active DLPs gained internal order as mRNA synthesis unfolded, while inactive DLPs remained dynamically disordered. Regions of viral protein/RNA constituents were analyzed across two different axes of symmetry to provide a more comprehensive view of moving components. Taken together, our results bring forth a new view of active DLPs, which may enable future pharmacological strategies aimed at obliterating rotavirus transcription as a therapeutic approach.

Uncovering metastability and disassembly hotspots in whole viral particles

Viruses are metastable macromolecular assemblies that toggle between multiple conformational states through molecular rearrangements that are critical for mediating viral host entry. Viruses respond to different host specific environmental cues to form disassembly intermediates for the eventual release of genomic material required for replication. Although static snapshots of these intermediates have been captured through structural techniques such as X-ray crystallography and cryo-EM, the mechanistic details of these conformational rearrangements underpinning viral metastability have been poorly understood. Amide hydrogen deuterium exchange mass spectrometry (HDXMS) is a powerful tool that measures hydrogen bonding propensities to probe changes in the dynamics of different macromolecular interactions. Chaotropic agents such as urea can be used to disrupt hydrogen bonds between different subunits, thereby ranking regions of the virus that are critical in maintaining viral stability. By controlled urea denaturation with HDXMS, we have identified specific loci in a Turnip Crinkle Virus (TCV) model showing increased deuterium exchange with even minimally disruptive concentrations of urea. These loci represent dynamic disassembly hotspots. These hotspots are predominantly present at the quaternary contacts at the 3-fold and 5-fold axes. This approach can be applied to detect vulnerabilities in virus icosahedral structures to uncover the molecular mechanism of viral disassembly.

Synthesis and Translation of Viral mRNA in Reovirus-Infected Cells: Progress and Remaining Questions

At the end of my doctoral studies, in 1988, I published a review article on the major steps of transcription and translation during the mammalian reovirus multiplication cycle, a topic that still fascinates me 30 years later. It is in the nature of scientific research to generate further questioning as new knowledge emerges. Our understanding of these fascinating viruses thus remains incomplete but it seemed appropriate at this moment to look back and reflect on our progress and most important questions that still puzzle us. It is also essential of being careful about concepts that seem so well established, but could still be better validated using new approaches. I hope that the few reflections presented here will stimulate discussions and maybe attract new investigators into the field of reovirus research. Many other aspects of the viral multiplication cycle would merit our attention. However, I will essentially limit my discussion to these central aspects of the viral cycle that are transcription of viral genes and their phenotypic expression through the host cell translational machinery. The objective here is not to review every aspect but to put more emphasis on important progress and challenges in the field.

In Situ Structures of the Polymerase Complex and RNA Genome Show How Aquareovirus Transcription Machineries Respond to Uncoating

Reoviruses carry out genomic RNA transcription within intact viruses to synthesize plus-sense RNA strands, which are capped prior to their release as mRNA. The in situ structures of the transcriptional enzyme complex (TEC) containing the RNA-dependent RNA polymerase (RdRp) and NTPase are known for the single-layered reovirus cytoplasmic polyhedrosis virus (CPV), but not for multilayered reoviruses, such as aquareoviruses (ARV), which possess a primed stage that CPV lacks. Consequently, how the RNA genome and TEC respond to priming in reoviruses is unknown. Here, we determined the near-atomic-resolution asymmetric structure of ARV in the primed state by cryo-electron microscopy (cryo-EM), revealing the in situ structures of 11 TECs inside each capsid and their interactions with the 11 surrounding double-stranded RNA (dsRNA) genome segments and with the 120 enclosing capsid shell protein (CSP) VP3 subunits. The RdRp VP2 and the NTPase VP4 associate with each other and with capsid vertices; both bind RNA in multiple locations, including a novel C-terminal domain of VP4. Structural comparison between the primed and quiescent states showed translocation of the dsRNA end from the NTPase to the RdRp during priming. The RNA template channel was open in both states, suggesting that channel blocking is not a regulating mechanism between these states in ARV. Instead, the NTPase C-terminal domain appears to regulate RNA translocation between the quiescent and primed states. Taking the data together, dsRNA viruses appear to have adapted divergent mechanisms to regulate genome transcription while retaining similar mechanisms to coassemble their genome segments, TEC, and capsid proteins into infectious virions.IMPORTANCE Viruses in the family Reoviridae are characterized by the ability to endogenously synthesize nascent RNA within the virus. However, the mechanisms for assembling their RNA genomes with transcriptional enzymes into a multilayered virion and for priming such a virion for transcription are poorly understood. By cryo-EM and novel asymmetric reconstruction, we determined the atomic structure of the transcription complex inside aquareoviruses (ARV) that are primed for infection. The transcription complex is anchored by the N-terminal segments of enclosing capsid proteins and contains an NTPase and a polymerase. The NTPase has a newly discovered domain that translocates the 5' end of plus-sense RNA in segmented dsRNA genomes from the NTPase to polymerase VP2 when the virus changes from the inactive (quiescent) to the primed state. Conformation changes in capsid proteins and transcriptional complexes suggest a mechanism for relaying information from the outside to the inside of the virus during priming.

Capsid Structure of dsRNA Fungal Viruses

Most fungal, double-stranded (ds) RNA viruses lack an extracellular life cycle stage and are transmitted by cytoplasmic interchange. dsRNA mycovirus capsids are based on a 120-subunit T = 1 capsid, with a dimer as the asymmetric unit. These capsids, which remain structurally undisturbed throughout the viral cycle, nevertheless, are dynamic particles involved in the organization of the viral genome and the viral polymerase necessary for RNA synthesis. The atomic structure of the T = 1 capsids of four mycoviruses was resolved: the L-A virus of Saccharomyces cerevisiae (ScV-L-A), Penicillium chrysogenum virus (PcV), Penicillium stoloniferum virus F (PsV-F), and Rosellinia necatrix quadrivirus 1 (RnQV1). These capsids show structural variations of the same framework, with 60 asymmetric or symmetric homodimers for ScV-L-A and PsV-F, respectively, monomers with a duplicated similar domain for PcV, and heterodimers of two different proteins for RnQV1. Mycovirus capsid proteins (CP) share a conserved α-helical domain, although the latter may carry different peptides inserted at preferential hotspots. Insertions in the CP outer surface are likely associated with enzymatic activities. Within the capsid, fungal dsRNA viruses show a low degree of genome compaction compared to reoviruses, and contain one to two copies of the RNA-polymerase complex per virion.

Interaction between a Unique Minor Protein and a Major Capsid Protein of Bluetongue Virus Controls Virus Infectivity

Among the Reoviridae family of double-stranded RNA viruses, only members of the Orbivirus genus possess a unique structural protein, termed VP6, within their particles. Bluetongue virus (BTV), an important livestock pathogen, is the prototype Orbivirus. BTV VP6 is an ATP-dependent RNA helicase, and it is indispensable for virus replication. In the study described in this report, we investigated how VP6 might be recruited to the virus capsid and whether the BTV structural protein VP3, which forms the internal layer of the virus capsid core, is involved in VP6 recruitment. We first demonstrated that VP6 interacts with VP3 and colocalizes with VP3 during capsid assembly. A series of VP6 mutants was then generated, and in combination with immunoprecipitation and size exclusion chromatographic analyses, we demonstrated that VP6 directly interacts with VP3 via a specific region of the C-terminal portion of VP6. Finally, using our reverse genetics system, mutant VP6 proteins were introduced into the BTV genome and interactions between VP6 and VP3 were shown in a live cell system. We demonstrate that BTV strains possessing a mutant VP6 are replication deficient in wild-type BSR cells and fail to recruit the viral replicase complex into the virus particle core. Taken together, these data suggest that the interaction between VP3 and VP6 could be important in the packaging of the viral genome and early stages of particle formation.

IMPORTANCE The orbivirus bluetongue virus (BTV) is the causative agent of bluetongue disease of livestock, often causing significant economic and agricultural impacts in the livestock industry. In the study described in this report, we identified the essential region and residues of the unique orbivirus capsid protein VP6 which are responsible for its interaction with other BTV proteins and its subsequent recruitment into the virus particle. The nature and mechanism of these interactions suggest that VP6 has a key role in packaging of the BTV genome into the virus particle. As such, this is a highly significant finding, as this new understanding of BTV assembly could be exploited to design novel vaccines and antivirals against bluetongue disease.

Hierarchical structure assembly model of rice dwarf virus particle formation

Rice dwarf virus (RDV) of the family Reoviridae and genus Phytoreovirus, is the cause of rice dwarf disease, a major negative effector of rice production throughout East Asia, including Japan. RDV has an icosahedral double-layered shell of approximately 70 nm diameter. The structural proteins constituting the capsid can self-assemble into a correct particle without requiring the help of any external factors in vitro. A total of more than 900 components assemble to make the full particle. A series of structural and functional studies of RDV, including X-ray crystallography and cryo-electron microscopy, suggest a hierarchical self-assembly mechanism involving both homologous and heterologous interactions. As such, systems for the recognition of each component should be essential for particle formation.

Bluetongue virus structure and assembly

Bluetongue virus (BTV) is an insect-vectored emerging pathogen of wild ruminants and livestock in many parts of the world. The virion particle is a complex structure of consecutive layers of protein surrounding a genome of ten double-stranded (ds) RNA segments. BTV has been studied as a model system for large, non-enveloped dsRNA viruses. Several new techniques have been applied to define the virus-encoded enzymes required for RNA replication to provide an order for the assembly of the capsid shell and the protein sequestration required for it. Further, a reconstituted in vitro system has defined the individual steps of the assembly and packaging of the genomic RNA. These findings illuminate BTV assembly and indicate the pathways that related viruses might use to provide an informed starting point for intervention or prevention.

Heterodimers as the Structural Unit of the T=1 Capsid of the Fungal Double-Stranded RNA Rosellinia necatrix Quadrivirus 1

Most double-stranded RNA (dsRNA) viruses are transcribed and replicated in a specialized icosahedral capsid with a T=1 lattice consisting of 60 asymmetric capsid protein (CP) dimers. These capsids help to organize the viral genome and replicative complex(es). They also act as molecular sieves that isolate the virus genome from host defense mechanisms and allow the passage of nucleotides and viral transcripts. Rosellinia necatrix quadrivirus 1 (RnQV1), the type species of the family Quadriviridae, is a dsRNA fungal virus with a multipartite genome consisting of four monocistronic segments (segments 1 to 4). dsRNA-2 and dsRNA-4 encode two CPs (P2 and P4, respectively), which coassemble into ∼450-Å-diameter capsids. We used three-dimensional cryo-electron microscopy combined with complementary biophysical techniques to determine the structures of RnQV1 virion strains W1075 and W1118. RnQV1 has a quadripartite genome, and the capsid is based on a single-shelled T=1 lattice built of P2-P4 dimers. Whereas the RnQV1-W1118 capsid is built of full-length CP, P2 and P4 of RnQV1-W1075 are cleaved into several polypeptides, maintaining the capsid structural organization. RnQV1 heterodimers have a quaternary organization similar to that of homodimers of reoviruses and other dsRNA mycoviruses. The RnQV1 capsid is the first T=1 capsid with a heterodimer as an asymmetric unit reported to date and follows the architectural principle for dsRNA viruses that a 120-subunit capsid is a conserved assembly that supports dsRNA replication and organization.

IMPORTANCE

Given their importance to health, members of the family Reoviridae are the basis of most structural and functional studies and provide much of our knowledge of dsRNA viruses. Analysis of bacterial, protozoal, and fungal dsRNA viruses has improved our understanding of their structure, function, and evolution, as well. Here, we studied a dsRNA virus that infects the fungus Rosellinia necatrix, an ascomycete that is pathogenic to a wide range of plants. Using three-dimensional cryo-electron microscopy and analytical ultracentrifugation analysis, we determined the structure and stoichiometry of Rosellinia necatrix quadrivirus 1 (RnQV1). The RnQV1 capsid is a T=1 capsid with 60 heterodimers as the asymmetric units. The large amount of genetic information used by RnQV1 to construct a simple T=1 capsid is probably related to the numerous virus-host and virus-virus interactions that it must face in its life cycle, which lacks an extracellular phase.

Hidden symmetry of small spherical viruses and organization principles in "anomalous" and double-shelled capsid nanoassemblies

We propose the principles of structural organization in spherical nanoassemblies with icosahedral symmetry constituted by asymmetric protein molecules. The approach modifies the paradigmatic geometrical Caspar and Klug (CK) model of icosahedral viral capsids and demonstrates the common origin of both the "anomalous" and conventional capsid structures. In contrast to all previous models of "anomalous" viral capsids the proposed modified model conserves the basic structural principles of the CK approach and reveals the common hidden symmetry underlying all small viral shells. We demonstrate the common genesis of the "anomalous" and conventional capsids and explain their structures in the same frame. The organization principles are derived from the group theory analysis of the positional order on the spherical surface. The relationship between the modified CK geometrical model and the theory of two-dimensional spherical crystallization is discussed. We also apply the proposed approach to complex double-shelled capsids and capsids with protruding knob-like proteins. The introduced notion of commensurability for the concentric nanoshells explains the peculiarities of their organization and helps to predict analogous, but yet undiscovered, double-shelled viral capsid nanostructures.

[Rotaviruses]

Rotavirus, a member of the family Reoviridae, was identified as the leading etiological agent of severe gastroenteritis in infants and young children in 1973. The rotavirus genome is composed of 11 gene segments of double-stranded (ds)RNA. During the last 40 years, a large amount of basic research on rotavirus structure, genome, antigen, replication, pathogenesis, epidemiology, immune responses, and evolution has been accumulated. This article reviews the fundamental aspects of rotavirology including recent important achievements in research.

Silencing the alarms: Innate immune antagonism by rotavirus NSP1 and VP3

The innate immune response involves a broad array of pathogen sensors that stimulate the production of interferons (IFNs) to induce an antiviral state. Rotavirus, a significant cause of childhood gastroenteritis and a member of the Reoviridae family of segmented, double-stranded RNA viruses, encodes at least two direct antagonists of host innate immunity: NSP1 and VP3. NSP1, a putative E3 ubiquitin ligase, mediates the degradation of cellular factors involved in both IFN induction and downstream signaling. VP3, the viral capping enzyme, utilizes a 2H-phosphodiesterase domain to prevent activation of the cellular oligoadenylate synthase (OAS)/RNase L pathway. Computational, molecular, and biochemical studies have provided key insights into the structural and mechanistic basis of innate immune antagonism by NSP1 and VP3 of group A rotaviruses (RVA). Future studies with non-RVA isolates will be essential to understand how other rotavirus species evade host innate immune responses.

•

Rotavirus NSP1 and VP3 directly antagonize host innate immune pathways.

•

NSP1, a putative E3 ubiquitin ligase, mediates turnover of multiple immune factors.

•

VP3, the viral capping enzyme, has phosphodiesterase activity to block OAS/RNase L.

Electron microscopic analysis of rotavirus assembly-replication intermediates

Rotaviruses (RVs) replicate their segmented, double-stranded RNA genomes in tandem with early virion assembly. In this study, we sought to gain insight into the ultrastructure of RV assembly-replication intermediates (RIs) using transmission electron microscopy (EM). Specifically, we examined a replicase-competent, subcellular fraction that contains all known RV RIs. Three never-before-seen complexes were visualized in this fraction. Using in vitro reconstitution, we showed that ~15-nm doughnut-shaped proteins in strings were nonstructural protein 2 (NSP2) bound to viral RNA transcripts. Moreover, using immunoaffinity-capture EM, we revealed that ~20-nm pebble-shaped complexes contain the viral RNA polymerase (VP1) and RNA capping enzyme (VP3). Finally, using a gel purification method, we demonstrated that ~30–70-nm electron-dense, particle-shaped complexes represent replicase-competent core RIs, containing VP1, VP3, and NSP2 as well as capsid proteins VP2 and VP6. The results of this study raise new questions about the interactions among viral proteins and RNA during the concerted assembly-replicase process.

Solid-to-fluid-like DNA transition in viruses facilitates infection

Releasing the packaged viral DNA into the host cell is an essential process to initiate viral infection. In many double-stranded DNA bacterial viruses and herpesviruses, the tightly packaged genome is hexagonally ordered and stressed in the protein shell, called the capsid. DNA condensed in this state inside viral capsids has been shown to be trapped in a glassy state, with restricted molecular motion in vitro. This limited intracapsid DNA mobility is caused by the sliding friction between closely packaged DNA strands, as a result of the repulsive interactions between the negative charges on the DNA helices. It had been unclear how this rigid crystalline structure of the viral genome rapidly ejects from the capsid, reaching rates of 60,000 bp/s. Through a combination of single-molecule and bulk techniques, we determined how the structure and energy of the encapsidated DNA in phage λ regulates the mobility required for its ejection. Our data show that packaged λ-DNA undergoes a solid-to-fluid-like disordering transition as a function of temperature, resulting locally in less densely packed DNA, reducing DNA-DNA repulsions. This process leads to a significant increase in genome mobility or fluidity, which facilitates genome release at temperatures close to that of viral infection (37 °C), suggesting a remarkable physical adaptation of bacterial viruses to the environment of Escherichia coli cells in a human host.

Regulation of rotavirus polymerase activity by inner capsid proteins

Rotavirus, a cause of pediatric gastroenteritis, has a genome consisting of 11 segments of double-stranded (ds)RNA surrounded by a triple-layered protein capsid. The rotavirus RNA-dependent RNA polymerase, VP1, synthesizes both dsRNA and plus-strand RNA (+RNA) within subviral particles. Structural analyses of the rotavirus capsid and polymerase, combined with functional studies of purified capsid proteins, indicate that the inner capsid protein controls the initiation of RNA synthesis by VP1. Whether VP1 directs dsRNA versus +RNA synthesis may be regulated by the impact of the viral RNA capping enzyme on the position of the polymerase plug, a flexible element that inserts into one of the polymerase's RNA exit tunnels. This review discusses recent findings and ideas into the mechanisms used by rotavirus capsid proteins to control the activities of its viral polymerase and to coordinate RNA synthesis with the assembly of virus particles.

Probing the sites of interactions of rotaviral proteins involved in replication

Replication and packaging of the rotavirus genome occur in cytoplasmic compartments called viroplasms, which form during virus infection. These processes are orchestrated by yet-to-be-understood complex networks of interactions involving nonstructural proteins (NSPs) 2, 5, and 6 and structural proteins (VPs) 1, 2, 3, and 6. The multifunctional enzyme NSP2, an octamer with RNA binding activity, is critical for viroplasm formation with its binding partner, NSP5, and for genome replication/packaging through its interactions with replicating RNA, the viral polymerase VP1, and the inner core protein VP2. Using isothermal calorimetry, biolayer interferometry, and peptide array screening, we examined the interactions between NSP2, VP1, VP2, NSP5, and NSP6. These studies provide the first evidence that NSP2 can directly bind to VP1, VP2, and NSP6, in addition to the previously known binding to NSP5. The interacting sites identified from reciprocal peptide arrays were found to be in close proximity to the RNA template entry and double-stranded RNA (dsRNA) exit tunnels of VP1 and near the catalytic cleft and RNA-binding grooves of NSP2; these sites are consistent with the proposed role of NSP2 in facilitating dsRNA synthesis by VP1. Peptide screening of VP2 identified NSP2-binding sites in the regions close to the intersubunit junctions, suggesting that NSP2 binding could be a regulatory mechanism for preventing the premature self-assembly of VP2. The binding sites on NSP2 for NSP6 were found to overlap that of VP1, and the NSP5-binding sites overlap those of VP2 and VP1, suggesting that interaction of these proteins with NSP2 is likely spatially and/or temporally regulated.

IMPORTANCE

Replication and packaging of the rotavirus genome occur in cytoplasmic compartments called viroplasms that form during virus infection and are orchestrated by complex networks of interactions involving nonstructural proteins (NSPs) and structural proteins (VPs). A multifunctional RNA-binding NSP2 octamer with nucleotidyl phosphatase activity is central to viroplasm formation and RNA replication. Here we provide the first evidence that NSP2 can directly bind to VP1, VP2, and NSP6, in addition to the previously known binding to NSP5. The interacting sites identified from peptide arrays are consistent with the proposed role of NSP2 in facilitating dsRNA synthesis by VP1 and also point to NSP2's possible role in preventing the premature self-assembly of VP2 cores. Our findings lead us to propose that the NSP2 octamer with multiple enzymatic activities is a principal regulator of viroplasm formation, recruitment of viral proteins into the viroplasms, and possibly genome replication.

The molecular biology of Bluetongue virus replication

The members of Orbivirus genus within the Reoviridae family are arthropod-borne viruses which are responsible for high morbidity and mortality in ruminants. Bluetongue virus (BTV) which causes disease in livestock (sheep, goat, cattle) has been in the forefront of molecular studies for the last three decades and now represents the best understood orbivirus at a molecular and structural level. The complex nature of the virion structure has been well characterised at high resolution along with the definition of the virus encoded enzymes required for RNA replication; the ordered assembly of the capsid shell as well as the protein and genome sequestration required for it; and the role of host proteins in virus entry and virus release. More recent developments of Reverse Genetics and Cell-Free Assembly systems have allowed integration of the accumulated structural and molecular knowledge to be tested at meticulous level, yielding higher insight into basic molecular virology, from which the rational design of safe efficacious vaccines has been possible. This article is centred on the molecular dissection of BTV with a view to understanding the role of each protein in the virus replication cycle. These areas are important in themselves for BTV replication but they also indicate the pathways that related viruses, which includes viruses that are pathogenic to man and animals, might also use providing an informed starting point for intervention or prevention.

Differential accessibility of a rotavirus VP6 epitope in trimers comprising type I, II, or III channels as revealed by binding of a human rotavirus VP6-specific antibody

Previous human antibody studies have shown that the human VH1-46 antibody variable gene segment encodes much of the naturally occurring human B cell response to rotavirus and is directed to virus protein 6 (VP6). It is currently unknown why some of the VH1-46-encoded human VP6 monoclonal antibodies inhibit viral transcription while others do not. In part, there are affinity differences between antibodies that likely affect inhibitory activity, but we also hypothesize that there are differing modes of binding to VP6 that affect the ability to block the transcriptional pore on double-layered particles. Here, we used a hybrid method approach for antibody epitope mapping, including single-particle cryo-electron microscopy (cryo-EM) and enhanced amide hydrogen-deuterium exchange mass spectrometry (DXMS) to determine the location and mode of binding of a VH1-46-encoded antibody, RV6-25. The structure of the RV6-25 antibody-double-layered particle (DLP) complex indicated a very complex binding pattern that revealed subtle differences in accessibility of the VP6 epitope depending on its position in the type I, II, or III channels. These subtle variations in the presentation or accessibility of the RV VP6 capsid layer led to position-specific differences in occupancy for binding of the RV6-25 antibody. The studies also showed that the location of binding of the noninhibitory antibody RV6-25 on the apical surface of RV VP6 head domain does not obstruct the transcription pore upon antibody binding, in contrast to binding of an inhibitory antibody, RV6-26, deeper in the transcriptional pore.

Further characterisation of rotavirus cores: Ss(+)RNAs can be packaged in vitro but packaging lacks sequence specificity

Rotavirus (RV) cores were released from double-layered particles (DLPs) by high concentrations of CaCl2, purified and 'opened' by treatment with EDTA or EGTA. Under appropriate in vitro conditions DLPs have been shown to have transcriptase and 'open cores' replicase activity. Furthermore, it has been demonstrated that transcriptase activity and infectivity of native cores can be restored by transcapsidation with VP6, VP7 and VP4. The missing link for particle reconstitution in vitro has been the manipulation of 'open cores' to become functionally active cores again. The experiments described here were undertaken with the aim of exploring packaging of RV RNAs into opened cores in vitro. Rotavirus cores were opened by approximately 200μM EGTA, leading to the release of genomic dsRNA. Conversely, RV cores were found to be stable in the presence of minimum concentrations of Ca(2+), Mg(2+), spermidine(3+) and cobalthexamine(3+) of between 40 and 300 μM. Aggregates of purified cores were resolved in the presence of 0.3mM deoxycholate (minimum concentration). Core shells opened with EGTA were reconstituted by the addition of di- or trivalent cations within 2 min of the opening procedure. Addition of purified, baculovirus recombinant-expressed VP6 to native and reconstituted cores led to the formation of DLPs or DLP-like particles, which upon transfection into MA104 cells were infectious. The rescued infectivity likely originated in part from unopened and in part from reconstituted cores. Radiolabelled RV (+) ssRNAs could be packaged into reconstituted cores and DLPs, as indicated by resistance to RNase I digestion. The packaging reaction was, however, not RV RNA sequence-specific, since unrelated ssRNAs, such as those transcribed from HIV-2 cDNAs, were also packaged. The kinetics of packaging of homologous and heterologous RNAs were similar, as evidenced by competitive packaging assays. None of the packaged in vitro engineered RNA segments has so far been rescued into infectious virus.

Viroplasm protein P9-1 of Rice black-streaked dwarf virus preferentially binds to single-stranded RNA in its octamer form, and the central interior structure formed by this octamer constitutes the major RNA binding site

The P9-1 protein of Rice black-streaked dwarf virus (RBSDV) is an essential part of the viroplasm. However, little is known about its nature or biological function in the viroplasm. In this study, the structure and function of P9-1 were analyzed for in vitro binding to nucleic acids. We found that the P9-1 protein preferentially bound to single-stranded versus double-stranded nucleic acids; however, the protein displayed no preference for RBSDV versus non-RBSDV single-stranded ssRNA (ssRNA). A gel mobility shift assay revealed that the RNA gradually shifted as increasing amounts of P9-1 were added, suggesting that multiple subunits of P9-1 bind to ssRNA. By using discontinuous blue native gel and chromatography analysis, we found that the P9-1 protein was capable of forming dimers, tetramers, and octamers. Strikingly, we demonstrated that P9-1 preferentially bound to ssRNA in the octamer, rather than the dimer, form. Deletion of the C-terminal arm resulted in P9-1 no longer forming octamers; consequently, the deletion mutant protein bound to ssRNA with significantly lower affinity and with fewer copies bound per ssRNA. Alanine substitution analysis revealed that electropositive amino acids among residues 25 to 44 are important for RNA binding and map to the central interior structure that was formed only by P9-1 octamers. Collectively, our findings provide novel insights into the structure and function of RBSDV viroplasm protein P9-1 binding to RNA.

Herpes virus genome, the pressure is on

Herpes simplex virus type 1 (HSV-1) packages its micrometers-long double-stranded DNA genome into a nanometer-scale protein shell, termed the capsid. Upon confinement within the capsid, neighboring DNA strands experience repulsive electrostatic and hydration forces as well as bending stress associated with the tight curvature required of packaged DNA. By osmotically suppressing DNA release from HSV-1 capsids, we provide the first experimental evidence of a high internal pressure of tens of atmospheres within a eukaryotic human virus, resulting from the confined genome. Furthermore, the ejection is progressively suppressed by increasing external osmotic pressures, which reveals that internal pressure is capable of powering ejection of the entire genome from the viral capsid. Despite billions of years of evolution separating eukaryotic viruses and bacteriophages, pressure-driven DNA ejection has been conserved. This suggests it is a key mechanism for viral infection and thus presents a new target for antiviral therapies.

Rotavirus mRNAS are released by transcript-specific channels in the double-layered viral capsid

Rotaviruses are the single most common cause of fatal and severe childhood diarrheal illness worldwide (>125 million cases annually). Rotavirus shares structural and functional features with many viruses, such as the presence of segmented double-stranded RNA genomes selectively and tightly packed with a conserved number of transcription complexes in icosahedral capsids. Nascent transcripts exit the capsid through 12 channels, but it is unknown whether these channels specialize in specific transcripts or simply act as general exit conduits; a detailed description of this process is needed for understanding viral replication and genomic organization. To this end, we developed a single molecule assay for capturing and identifying transcripts extruded from transcriptionally active viral particles. Our findings support a model in which each channel specializes in extruding transcripts of a specific segment that in turn is linked to a single transcription complex. Our approach can be extended to study other viruses and transcription systems.

Human rotavirus VP6-specific antibodies mediate intracellular neutralization by binding to a quaternary structure in the transcriptional pore

Several live attenuated rotavirus (RV) vaccines have been licensed, but the mechanisms of protective immunity are still poorly understood. The most frequent human B cell response is directed to the internal protein VP6 on the surface of double-layered particles, which is normally exposed only in the intracellular environment. Here, we show that the canonical VP6 antibodies secreted by humans bind to such particles and inhibit viral transcription. Polymeric IgA RV antibodies mediated an inhibitory effect against virus replication inside cells during IgA transcytosis. We defined the recognition site on VP6 as a quaternary epitope containing a high density of charged residues. RV human mAbs appear to bind to a negatively-charged patch on the surface of the Type I channel in the transcriptionally active particle, and they sterically block the channel. This unique mucosal mechanism of viral neutralization, which is not apparent from conventional immunoassays, may contribute significantly to human immunity to RV.

Rotavirus core shell subdomains involved in polymerase encapsidation into virus-like particles

The triple-layered rotavirus virion encases an 11-segmented, dsRNA genome and 11-12 copies of the viral polymerase (VP1). VP1 transcribes and replicates the genome while tethered beneath the VP2 core shell. Genome replication (i.e. minus-strand RNA synthesis) by VP1 occurs in association with core assembly. During this process, VP2 directly engages VP1, thereby (i) packaging the polymerase into a nascent core and (ii) triggering the enzyme to initiate minus-strand RNA synthesis on bound plus-strand RNA templates. Recent work has shed light on VP2 regions important for VP1 enzymic activity. In the current study, we sought to investigate VP2 subdomains involved in the encapsidation of VP1 into recombinant virus-like particles (VLPs), which are formed of VP2 and the middle layer virion protein (VP6). We showed that strain SA11 VLPs efficiently encapsidated SA11 VP1, but not the genetically divergent Bristol VP1. VLPs made with an SA11 VP2 mutant lacking residues 1-10 of the amino-terminal domain (NTD) were still able to encapsidate VP1; however, removal of the entire NTD (residues 1-102) completely abolished polymerase packaging. We also showed that a chimeric VP2 protein containing the NTD and dimer-forming subdomain of strain Bristol VP2 can efficiently encapsidate SA11 VP1. These results suggest that the VP2 NTD and dimer-forming subdomain play important, albeit non-specific, roles in both VP1 packaging and activation. When combined with previous work, the results of this study support the notion that the same VP2 regions that engage VP1 during activation are also involved in packaging the enzyme into the core.

Three-dimensional structure of victorivirus HvV190S suggests coat proteins in most totiviruses share a conserved core

Double-stranded (ds)RNA fungal viruses are currently assigned to six different families. Those from the family Totiviridae are characterized by nonsegmented genomes and single-layer capsids, 300–450 Å in diameter. Helminthosporium victoriae virus 190S (HvV190S), prototype of recently recognized genus Victorivirus, infects the filamentous fungus Helminthosporium victoriae (telomorph: Cochliobolus victoriae), which is the causal agent of Victoria blight of oats. The HvV190S genome is 5179 bp long and encompasses two large, slightly overlapping open reading frames that encode the coat protein (CP, 772 aa) and the RNA-dependent RNA polymerase (RdRp, 835 aa). To our present knowledge, victoriviruses uniquely express their RdRps via a coupled termination–reinitiation mechanism that differs from the well-characterized Saccharomyces cerevisiae virus L-A (ScV-L-A, prototype of genus Totivirus), in which the RdRp is expressed as a CP/RdRp fusion protein due to ribosomal frameshifting. Here, we used transmission electron cryomicroscopy and three-dimensional image reconstruction to determine the structures of HvV190S virions and two types of virus-like particles (capsids lacking dsRNA and capsids lacking both dsRNA and RdRp) at estimated resolutions of 7.1, 7.5, and 7.6 Å, respectively. The HvV190S capsid is thin and smooth, and contains 120 copies of CP arranged in a “T = 2” icosahedral lattice characteristic of ScV-L-A and other dsRNA viruses. For aid in our interpretations, we developed and used an iterative segmentation procedure to define the boundaries of the two, chemically identical CP subunits in each asymmetric unit. Both subunits have a similar fold, but one that differs from ScV-L-A in many details except for a core α-helical region that is further predicted to be conserved among many other totiviruses. In particular, we predict the structures of other victoriviruses to be highly similar to HvV190S and the structures of most if not all totiviruses including, Leishmania RNA virus 1, to be similar as well.

Of the known dsRNA fungal viruses, the best characterized is Saccharomyces cerevisiae virus L-A (ScV-L-A), prototype of the genus Totivirus, family Totiviridae. Until the current study, there have been no subnanometer structures of dsRNA fungal viruses from the genus Victorivirus, which is the largest in family Totiviridae. The 3D cryo-reconstruction presented here of prototype victorivirus Helminthosporium victoriae virus 190S (HvV190S) approaches 7-Å resolution and shows the asymmetric unit of the capsid is a dimer comprising two, chemically identical coat-protein subunits organized in a so called “T = 2” lattice. These HvV190S subunits have a similar fold, but one that differs from ScV-L-A in many details except for a core α-helical region that is further predicted to be conserved among many other totiviruses. In particular, we predict the structures of other victoriviruses to be highly similar to HvV190S and the structures of most if not all totiviruses, including Leishmania RNA virus 1, to be similar as well.

Chrysovirus structure: repeated helical core as evidence of gene duplication

Chrysoviruses are double-stranded RNA viruses with a multipartite genome. Structure of two fungal chrysoviruses, Penicillium chrysogenum virus and Cryphonectria nitschkei chrysovirus 1, has been determined by three-dimensional cryo-electron microscopy analysis and in hydrodynamic studies. The capsids of both viruses are based on a T=1 lattice containing 60 subunits, remain structurally undisturbed throughout the viral cycle, and participate in genome metabolism. The capsid protein is formed by a repeated α-helical core, indicative of gene duplication. Whereas the chrysovirus capsid protein has two motifs with the same fold, most dsRNA virus capsid subunits consist of dimers of a single protein with similar folds. The arrangement of the chrysovirus α-helical core is conserved in the totivirus L-A capsid protein, suggesting a shared basic fold. The encapsidated genome is organized in concentric shells; whereas inner dsRNA shells are diffuse, the outermost layer is organized into a dodecahedral cage beneath the protein capsid. This genome ordering could constitute a framework for dsRNA transcription in the capsid interior and/or have a structural role for capsid stability.

Crystallographic Analysis of Rotavirus NSP2-RNA Complex Reveals Specific Recognition of 5' GG Sequence for RTPase Activity

Rotavirus nonstructural protein NSP2, a functional octamer, is critical for the formation of viroplasms, which are exclusive sites for replication and packaging of the segmented double-stranded RNA (dsRNA) rotavirus genome. As a component of replication intermediates, NSP2 is also implicated in various replication-related activities. In addition to sequence-independent single-stranded RNA-binding and helix-destabilizing activities, NSP2 exhibits monomer-associated nucleoside and 5' RNA triphosphatase (NTPase/RTPase) activities that are mediated by a conserved H225 residue within a narrow enzymatic cleft. Lack of a 5' γ-phosphate is a common feature of the negative-strand RNA [(-)RNA] of the packaged dsRNA segments in rotavirus. Strikingly, all (-)RNAs (of group A rotaviruses) have a 5' GG dinucleotide sequence. As the only rotavirus protein with 5' RTPase activity, NSP2 is implicated in the removal of the γ-phosphate from the rotavirus (-)RNA. To understand how NSP2, despite its sequence-independent RNA-binding property, recognizes (-)RNA to hydrolyze the γ-phosphate within the catalytic cleft, we determined a crystal structure of NSP2 in complex with the 5' consensus sequence of minus-strand rotavirus RNA. Our studies show that the 5' GG of the bound oligoribonucleotide interacts extensively with highly conserved residues in the NSP2 enzymatic cleft. Although these residues provide GG-specific interactions, surface plasmon resonance studies suggest that the C-terminal helix and other basic residues outside the enzymatic cleft account for sequence-independent RNA binding of NSP2. A novel observation from our studies, which may have implications in viroplasm formation, is that the C-terminal helix of NSP2 exhibits two distinct conformations and engages in domain-swapping interactions, which result in the formation of NSP2 octamer chains.

Rotavirus non-structural proteins: structure and function

The replication of rotavirus is a complex process that is orchestrated by an exquisite interplay between the rotavirus non-structural and structural proteins. Subsequent to particle entry and genome transcription, the non-structural proteins coordinate and regulate viral mRNA translation and the formation of electron-dense viroplasms that serve as exclusive compartments for genome replication, genome encapsidation and capsid assembly. In addition, non-structural proteins are involved in antagonizing the antiviral host response and in subverting important cellular processes to enable successful virus replication. Although far from complete, new structural studies, together with functional studies, provide substantial insight into how the non-structural proteins coordinate rotavirus replication. This brief review highlights our current knowledge of the structure-function relationships of the rotavirus non-structural proteins, as well as fascinating questions that remain to be understood.

Production of in vivo-biotinylated rotavirus particles

Although inserting exogenous viral genome segments into rotavirus particles remains a hard challenge, this study describes the in vivo incorporation of a recombinant viral capsid protein (VP6) into newly assembled rotavirus particles. In vivo biotinylation technology was exploited to biotinylate a recombinant VP6 protein fused to a 15 aa biotin-acceptor peptide (BAP) by the bacterial biotin ligase BirA contextually co-expressed in mammalian cells. To avoid toxicity of VP6 overexpression, a stable HEK293 cell line was constructed with tetracycline-inducible expression of VP6–BAP and constitutive expression of BirA. Following tetracycline induction and rotavirus infection, VP6–BAP was biotinylated, recruited into viroplasms and incorporated into newly assembled virions. The biotin molecules in the capsid allowed the use of streptavidin-coated magnetic beads as a purification technique instead of CsCl gradient ultracentrifugation. Following transfection, double-layered particles attached to beads were able to induce viroplasm formation and to generate infective viral progeny.

Interactions among capsid proteins orchestrate rotavirus particle functions

Rotaviruses are members of the Reoviridae family of non-enveloped viruses and important etiologic agents of acute gastroenteritis in infants and young children. In recent years, high-resolution structures of triple-layered rotavirus virions and the constituent proteins have provided valuable insights into functions. Of note, structural studies have revealed the position of the viral RNA-dependent RNA polymerase, VP1, within the inner capsid, which in turn provides clues about the location of the viral capping machinery and the route of viral transcript egress. Mechanisms by which the viral spike protein, VP4, mediates receptor binding and membrane penetration have also been aided by high-resolution structural studies. Future work may serve to fill the remaining gaps in understanding of rotavirus particle structure and function.

Cryo-EM structure of a transcribing cypovirus

Double-stranded RNA viruses in the family Reoviridae are capable of transcribing and capping nascent mRNA within an icosahedral viral capsid that remains intact throughout repeated transcription cycles. However, how the highly coordinated mRNA transcription and capping process is facilitated by viral capsid proteins is still unknown. Cypovirus provides a good model system for studying the mRNA transcription and capping mechanism of viruses in the family Reoviridae. Here, we report a full backbone model of a transcribing cypovirus built from a near-atomic-resolution density map by cryoelectron microscopy. Compared with the structure of a nontranscribing cypovirus, the major capsid proteins of transcribing cypovirus undergo a series of conformational changes, giving rise to structural changes in the capsid shell: (i) an enlarged capsid chamber, which provides genomic RNA with more flexibility to move within the densely packed capsid, and (ii) a widened peripentonal channel in the capsid shell, which we confirmed to be a pathway for nascent mRNA. A rod-like structure attributable to a partially resolved nascent mRNA was observed in this channel. In addition, conformational change in the turret protein results in a relatively open turret at each fivefold axis. A GMP moiety, which is transferred to 5'-diphosphorylated mRNA during the mRNA capping reaction, was identified in the pocket-like guanylyltransferase domain of the turret protein.

Virus disinfection mechanisms: the role of virus composition, structure, and function

Drinking waters are treated for enteric virus via a number of disinfection techniques including chemical oxidants, irradiation, and heat, however the inactivation mechanisms during disinfection remain elusive. Owing to the fact that a number of significant waterborne virus strains are not readily culturable in vitro at this time (e.g. norovirus, hepatitis A), the susceptibility of these viruses to disinfection is largely unknown. An in-depth understanding of the mechanisms involved in virus inactivation would aid in predicting the susceptibility of non-culturable virus strains to disinfection and would foster the development of improved disinfection methods. Recent technological advances in virology research have provided a wealth of information on enteric virus compositions, structures, and biological functions. This knowledge will allow for physical/chemical descriptions of virus inactivation and thus further our understanding of virus disinfection to the most basic mechanistic level.

Crystallographic analysis reveals octamerization of viroplasm matrix protein P9-1 of Rice black streaked dwarf virus

The P9-1 protein of Rice black streaked dwarf virus accumulates in viroplasm inclusions, which are structures that appear to play an important role in viral morphogenesis and are commonly found in viruses in the family Reoviridae. Crystallographic analysis of P9-1 revealed structural features that allow the protein to form dimers via hydrophobic interactions. Each dimer has carboxy-terminal regions, resembling arms, that extend to neighboring dimers, thereby uniting sets of four dimers via lateral hydrophobic interactions, to yield cylindrical octamers. The importance of these regions for the formation of viroplasm-like inclusions was confirmed by the absence of such inclusions when P9-1 was expressed without its carboxy-terminal arm. The octamers are vertically elongated cylinders resembling the structures formed by NSP2 of rotavirus, even though there are no significant similarities between the respective primary and secondary structures of the two proteins. Our results suggest that an octameric structure with an internal pore might be important for the functioning of the respective proteins in the events that occur in the viroplasm, which might include viral morphogenesis.

Principles of virus structural organization

Viruses, the molecular nanomachines infecting hosts ranging from prokaryotes to eukaryotes, come in different sizes, shapes, and symmetries. Questions such as what principles govern their structural organization, what factors guide their assembly, how these viruses integrate multifarious functions into one unique structure have enamored researchers for years. In the last five decades, following Caspar and Klug's elegant conceptualization of how viruses are constructed, high-resolution structural studies using X-ray crystallography and more recently cryo-EM techniques have provided a wealth of information on structures of a variety of viruses. These studies have significantly -furthered our understanding of the principles that underlie structural organization in viruses. Such an understanding has practical impact in providing a rational basis for the design and development of antiviral strategies. In this chapter, we review principles underlying capsid formation in a variety of viruses, emphasizing the recent developments along with some historical perspective.

Viroplasm matrix protein Pns9 from rice gall dwarf virus forms an octameric cylindrical structure

The non-structural Pns9 protein of rice gall dwarf virus (RGDV) accumulates in viroplasm inclusions, which are structures that appear to play an important role in viral morphogenesis and are commonly found in host cells infected by viruses in the family Reoviridae. Immunofluorescence and immunoelectron microscopy of RGDV-infected vector cells in monolayers, using antibodies against Pns9 of RGDV and expression of Pns9 in Spodoptera frugiperda cells, demonstrated that Pns9 is the minimal viral factor necessary for formation of viroplasm inclusion during infection by RGDV. When Pns9 in solution was observed under a conventional electron microscope, it appeared as ring-like aggregates of approximately 100 Å in diameter. Cryo-electron microscopic analysis of these aggregates revealed cylinders of octameric Pns9, whose dimensions were similar to those observed under the conventional electron microscope. Octamerization of Pns9 in solution was confirmed by the results of size-exclusion chromatography. Among proteins of viruses that belong to the family Reoviridae whose three-dimensional structures are available, a matrix protein of the viroplasm of rotavirus, NSP2, forms similar octamers, an observation that suggests similar roles for Pns9 and NSP2 in morphogenesis in animal-infecting and in plant-infecting reoviruses.

Structural organisation of the rotavirus nonstructural protein NSP5

Rotavirus is one of the leading agents of gastroenteritis worldwide. During infection, viral factories (viroplasms) are formed. The rotavirus nonstructural proteins NSP5 and NSP2 are the major building blocks of viroplasms; however, NSP5 function and organisation remain elusive. In this report, we present a structural characterisation of NSP5. Multi-angle laser light scattering, sedimentation velocity and equilibrium sedimentation experiments demonstrate that recombinant full-length NSP5 forms a decamer in solution. Far-Western, pull-down and multi-angle laser light scattering experiments show that NSP5 has two oligomerisation regions. The first region, residues 103-146, is involved in NSP5 dimerisation, whereas the second region, residues 189-198, is responsible for NSP5 decamerisation. Circular dichroism analyses of full-length and truncated forms of NSP5 reveal that the decamerisation region is helical, whereas the dimerisation region involves β-sheets. From these circular dichroism experiments, we also show that the NSP5 protomers contain two α-helices, a disordered N-terminal half and a C-terminal half that is primarily composed of β-sheet folds. This extensive structural characterisation of NSP5 led us to propose a model for its quaternary organisation. Finally, co-expression of NSP5 fragments and NSP2 in uninfected cells shows that the NSP5 decamerisation region is required for viroplasm-like structure formation. However, in vitro, the NSP5 decamerisation region partially inhibits the NSP2-NSP5 interaction. Our NSP5 model suggests that steric hindrance prevents NSP2 from binding to all NSP5 protomers. Some protomers may thus be free to interact with other NSP5 binding partners, such as viral RNAs and the viral polymerase VP1, to perform functions other than viroplasm organisation.

Assortment and packaging of the segmented rotavirus genome

The rotavirus (RV) genome comprises 11 segments of double-stranded RNA (dsRNA) and is contained within a non-enveloped, icosahedral particle. During assembly, a highly coordinated selective packaging mechanism ensures that progeny RV virions contain one of each genome segment. Cis-acting signals thought to mediate assortment and packaging are associated with putative panhandle structures formed by base-pairing of the ends of RV plus-strand RNAs (+RNAs). Viral polymerases within assembling core particles convert the 11 distinct +RNAs to dsRNA genome segments. It remains unclear whether RV +RNAs are assorted before or during encapsidation, and the functions of viral proteins during these processes are not resolved. However, as reviewed here, recent insights gained from the study of RV and two other segmented RNA viruses, influenza A virus and bacteriophage Φ6, reveal potential mechanisms of RV assortment and packaging.