Relieving repression

Engineering and application of LacI mutants with stringent expressions

Optimal transcriptional regulatory circuits are expected to exhibit stringent control, maintaining silence in the absence of inducers while exhibiting a broad induction dynamic range upon the addition of effectors. In the Plac /LacI pair, the promoter of the lac operon in Escherichia coli is characterized by its leakiness, attributed to the moderate affinity of LacI for its operator target. In response to this limitation, the LacI regulatory protein underwent engineering to enhance its regulatory properties. The M7 mutant, carrying I79T and N246S mutations, resulted in the lac promoter displaying approximately 95% less leaky expression and a broader induction dynamic range compared to the wild-type LacI. An in-depth analysis of each mutation revealed distinct regulatory profiles. In contrast to the wild-type LacI, the M7 mutant exhibited a tighter binding to the operator sequence, as evidenced by surface plasmon resonance studies. Leveraging the capabilities of the M7 mutant, a high-value sugar biosensor was constructed. This biosensor facilitated the selection of mutant galactosidases with approximately a seven-fold improvement in specific activity for transgalactosylation. Consequently, this advancement enabled enhanced biosynthesis of galacto-oligosaccharides (GOS).

Design and application of a lactulose biosensor

In this study the repressor of Escherichia coli lac operon, LacI, has been engineered for altered effector specificity. A LacI saturation mutagenesis library was subjected to Fluorescence Activated Cell Sorting (FACS) dual screening. Mutant LacI-L5 was selected and it is specifically induced by lactulose but not by other disaccharides tested (lactose, epilactose, maltose, sucrose, cellobiose and melibiose). LacI-L5 has been successfully used to construct a whole-cell lactulose biosensor which was then applied in directed evolution of cellobiose 2-epimerase (C2E) for elevated lactulose production. The mutant C2E enzyme with ~32-fold enhanced expression level was selected, demonstrating the high efficiency of the lactulose biosensor. LacI-L5 can also be used as a novel regulatory tool. This work explores the potential of engineering LacI for customized molecular biosensors which can be applied in practice.

Novel insights into the regulation of LexA in the cyanobacterium Synechocystis sp. Strain PCC 6803

The transcription factor LexA in the cyanobacterium Synechocystis sp. strain PCC 6803 has been shown to regulate genes that are not directly involved in DNA repair but instead in several different metabolic pathways. However, the signal transduction pathways remain largely uncharacterized. The present work gives novel insights into the regulation of LexA in this unicellular cyanobacterium. A combination of Northern and Western blotting, using specific antibodies against the cyanobacterial LexA, was employed to show that this transcription regulator is under posttranscriptional control, in addition to the classical and already-described transcriptional regulation. Moreover, detailed two-dimensional (2D) electrophoresis analyses of the protein revealed that LexA undergoes posttranslational modifications. Finally, a fully segregated LexA::GFP (green fluorescent protein) fusion-modified strain was produced to image LexA's spatial distribution in live cells. The fusion protein retains DNA binding capabilities, and the GFP fluorescence indicates that LexA is localized in the innermost region of the cytoplasm, decorating the DNA in an evenly distributed pattern. The implications of these findings for the overall role of LexA in Synechocystis sp. strain PCC 6803 are further discussed.

Positions 94-98 of the lactose repressor N-subdomain monomer-monomer interface are critical for allosteric communication

The central region of the LacI N-subdomain monomer-monomer interface includes residues K84, V94, V95, V96, S97, and M98. The side chains of these residues line the β-strands at this interface and interact to create a network of hydrophobic, charged, and polar interactions that significantly rearranges in different functional states of LacI. Prior work showed that converting K84 to an apolar residue or converting V96 to an acidic residue impedes the allosteric response to inducer. Thus, we postulated that a disproportionate number of substitutions in this region of the monomer-monomer interface would alter the complex features of the LacI allosteric response. To explore this hypothesis, acidic, basic, polar, and apolar mutations were introduced at positions 94-98. Despite their varied locations along the β-strands that flank the interface, ∼70% of the mutations impact allosteric behavior, with the most significant effects found for charged substitutions. Of note, many of the LacI variants with minor functional impact exhibited altered stability to urea denaturation. The results confirm the critical role of amino acids 94-98 and indicate that this N-subdomain interface forms a primary pathway in LacI allosteric response.

Flexibility in the inducer binding region is crucial for allostery in the Escherichia coli lactose repressor

Lactose repressor protein (LacI) utilizes an allosteric mechanism to regulate transcription in Escherichia coli, and the transition between inducer- and operator-bound states has been simulated by targeted molecular dynamics (TMD). The side chains of amino acids 149 and 193 interact and were predicted by TMD simulation to play a critical role in the early stages of the LacI conformational change. D149 contacts IPTG directly, and variations at this site provide the opportunity to dissect its role in inducer binding and signal transduction. Single mutants at D149 or S193 exhibit a minimal change in operator binding, and alterations in inducer binding parallel changes in operator release, indicating normal allosteric response. The observation that the double mutant D149A/S193A exhibits wild-type properties excludes the requirement for inter-residue hydrogen bond formation in the allosteric response. The double mutant D149C/S193C purified from cell extracts shows decreased sensitivity to inducer binding while retaining wild-type binding affinities and kinetic constants for both operator and inducer. By manipulating cysteine oxidation, we show that the more reduced state of D149C/S193C responds to inducer more like the wild-type protein, whereas the more oxidized state displays diminished inducer sensitivity. These features of D149C/S193C indicate that the novel disulfide bond formed in this mutant impedes the allosteric transition, consistent with the role of this region predicted by TMD simulation. Together, these results establish the requirement for flexibility in the spatial relationship between D149 and S193 rather than a specific D149-S193 interaction in the LacI allosteric response to inducer.

CD and MCD of CytC3 and taurine dioxygenase: role of the facial triad in alpha-KG-dependent oxygenases

The alpha-ketoglutarate (alpha-KG)-dependent oxygenases are a large and diverse class of mononuclear non-heme iron enzymes that require FeII, alpha-KG, and dioxygen for catalysis with the alpha-KG cosubstrate supplying the additional reducing equivalents for oxygen activation. While these systems exhibit a diverse array of reactivities (i.e., hydroxylation, desaturation, ring closure, etc.), they all share a common structural motif at the FeII active site, termed the 2-His-1-carboxylate facial triad. Recently, a new subclass of alpha-KG-dependent oxygenases has been identified that exhibits novel reactivity, the oxidative halogenation of unactivated carbon centers. These enzymes are also structurally unique in that they do not contain the standard facial triad, as a Cl- ligand is coordinated in place of the carboxylate. An FeII methodology involving CD, MCD, and VTVH MCD spectroscopies was applied to CytC3 to elucidate the active-site structural effects of this perturbation of the coordination sphere. A significant decrease in the affinity of FeII for apo-CytC3 was observed, supporting the necessity of the facial triad for iron coordination to form the resting site. In addition, interesting differences observed in the FeII/alpha-KG complex relative to the cognate complex in other alpha-KG-dependent oxygenases indicate the presence of a distorted 6C site with a weak water ligand. Combined with parallel studies of taurine dioxygenase and past studies of clavaminate synthase, these results define a role of the carboxylate ligand of the facial triad in stabilizing water coordination via a H-bonding interaction between the noncoordinating oxygen of the carboxylate and the coordinated water. These studies provide initial insight into the active-site features that favor chlorination by CytC3 over the hydroxylation reactions occurring in related enzymes.

Kinetic analysis of the conversion of nonheme (alkylperoxo)iron(III) species to iron(IV) complexes

Low-spin mononuclear (alkylperoxo)iron(III) complexes decompose by peroxide O-O bond homolysis to form iron(IV) species. We examined the kinetics of previously reported homolysis reactions for (alkylperoxo)iron(III) intermediates supported by TPA (tris(2-pyridylmethyl)amine) in CH3CN solution and promoted by pyridine N-oxide, and by BPMCN (N,N-bis(2-pyridylmethyl)-N,N-dimethyl-trans-1,2-diaminocyclohexane) in its cis-beta configuration in CH3CN and CH2Cl2, as well as for the previously unreported chemistry of TPA and 5-Me3TPA intermediates in acetone. Each of these reactions forms an oxoiron(IV) complex, except for the beta-BPMCN reaction in CH2Cl2 that yields a novel (hydroxo)(alkylperoxo)iron(IV) product. Temperature-dependent rate measurements suggest a common reaction trajectory for each of these reactions and verify previous theoretical estimates of a ca. 60 kJ/mol enthalpic barrier to homolysis. However, both the tetradentate supporting ligand and exogenous ligands in the sixth octahedral coordination site significantly perturb the homolyses, such that observed rates can vary over 2 orders of magnitude at a given temperature. This is manifested as a compensation effect in which increasing activation enthalpy is offset by increasingly favorable activation entropy. Moreover, the applied kinetic model is consistent with geometric isomerism in the low-spin (alkylperoxo)iron(III) intermediates, wherein the alkylperoxo ligand is coordinated in either of the inequivalent cis sites afforded by the nonheme ligands.

Spectroscopic and electronic structure studies of 2,3-dihydroxybiphenyl 1,2-dioxygenase: O2 reactivity of the non-heme ferrous site in extradiol dioxygenases

The extradiol dioxygenase, 2,3-dihydroxybiphenyl 1,2-dioxygenase (DHBD, EC 1.13.11.39), has been studied using magnetic circular dichroism (MCD), variable-temperature variable-field (VTVH) MCD, X-ray absorption (XAS) pre-edge, and extended X-ray absorption fine structure (EXAFS) spectroscopies, which are analogous to methods used in earlier studies on the extradiol dioxygenase catechol 2,3-dioxygenase [Mabrouk et al. J. Am. Chem Soc. 1991, 113, 4053-4061]. For DHBD, the spectroscopic data can be correlated to the results of crystallography and with the results from density functional calculations to obtain detailed geometric and electronic structure descriptions of the resting and substrate (DHB) bound forms of the enzyme. The geometry of the active site of the resting enzyme, square pyramidal with a strong Fe-glutamate bond in the equatorial plane, localizes the redox active orbital in an orientation appropriate for O(2) binding. However, the O(2) reaction is not favorable, as it would produce a ferric superoxide intermediate with a weak Fe-O bond. Substrate binding leads to a new square pyramidal structure with the strong Fe-glutamate bond in the axial direction as indicated by a decrease in the (5)E(g) and increase in the (5)T(2g) splitting. Electronic structure calculations provide insight into the relative lack of dioxygen reactivity for the resting enzyme and its activation upon substrate binding.

Catalytic Reaction Mechanism of Homogentisate Dioxygenase: A Hybrid DFT Study

Human homogentisate dioxygenase is an Fe(II)-dependent enzyme responsible for aromatic ring cleavage. The mechanism of its catalytic reaction has been investigated with the hybrid density functional method B3LYP. A relatively big model of the active site was first used to determine the substrate binding mode. It was found that binding of the substrate dianion with a vacant position trans to Glu341 is most favorable. The model was then truncated to include only the most relevant parts of the active-site residues involved in iron coordination and substrate binding. Thus, methylimidazole was used to model His292, His335, His365, and His371, while propionate modeled Glu341. The computational results suggest that the catalytic reaction of homogentisate dioxygenases involves three major chemical steps: formation of the peroxo intermediate, homolytic cleavage of the O-O bond leading to an arene oxide radical, and finally, cleavage of the six-membered ring. Calculated barriers for alternative reaction paths are markedly higher than for the proposed mechanism, and thus the computational results successfully explain the product specificity of the enzyme. Interestingly, the results indicate that the type of ring scission, intra or extra with respect to the substituents coordinating to iron, is controlled by the barrier heights for the decay of the arene oxide radical intermediate.

Rapid freeze-quench 57Fe Mössbauer spectroscopy: monitoring changes of an iron-containing active site during a biochemical reaction

Nuclear gamma resonance spectroscopy, also known as Mössbauer spectroscopy, is a technique that probes transitions between the nuclear ground state and a low-lying nuclear excited state. The nucleus most amenable to Mössbauer spectroscopy is 57Fe, and 57Fe Mössbauer spectroscopy provides detailed information about the chemical environment and electronic structure of iron. Iron is by far the most structurally and functionally diverse metal ion in biology, and 57Fe Mössbauer spectroscopy has played an important role in the elucidation of its biochemistry. In this article, we give a brief introduction to the technique and then focus on two recent exciting developments pertaining to the application of 57Fe Mössbauer spectroscopy in biochemistry. The first is the use of the rapid freeze-quench method in conjunction with Mössbauer spectroscopy to monitor changes at the Fe site during a biochemical reaction. This method has allowed for trapping and subsequent detailed spectroscopic characterization of reactive intermediates and thus has provided unique insight into the reaction mechanisms of Fe-containing enzymes. We outline the methodology using two examples: (1) oxygen activation by the non-heme diiron enzymes and (2) oxygen activation by taurine:alpha-ketoglutarate dioxygenase (TauD). The second development concerns the calculation of Mössbauer parameters using density functional theory (DFT) methods. By using the example of TauD, we show that comparison of experimental Mössbauer parameters with those obtained from calculations on model systems can be used to provide insight into the structure of a reaction intermediate.

Steric and electronic control over the reactivity of a thiolate-ligated Fe(II) complex with dioxygen and superoxide: reversible mu-oxo dimer formation

The reactivity between a thiolate-ligated five-coordinate complex [FeII(SMe2N4(tren))]+ (1) and dioxygen is examined in order to determine if O2 activation, resembling that of the metalloenzyme cytochrome P450, can be promoted even when O2 binds cis, as opposed to trans, to a thiolate. Previous work in our group showed that [FeII(SMe2N4(tren))]+ (1) reacts readily with superoxide (O2-) in the presence of a proton source to afford H2O2 via an Fe(III)-OOH intermediate, thus providing a biomimetic model for the metalloenzyme superoxide reductase (SOR). Addition of O2 to 1 affords binuclear mu-oxo-bridged [FeIII(SMe2N4(tren))]2(mu2-O)(PF6)2.3MeCN (3). At low temperatures, in protic solvents, an intermediate is detected, the details of which will be the subject of a separate paper. Although the thiolate ligand does not appear to perturb the metrical parameters of the unsupported mu-oxo bridge (Fe-O= 1.807(8) A, and Fe-O-Fe= 155.3(5) degrees fall in the usual range), it decreases the magnetic coupling between the irons (J=-28 cm(-1)) and creates a rather basic oxo site. Protonation of this oxo using strong (HBF4, HCl) or weak (HOAc, NH4PF6, LutNHCl) acids results in bridge cleavage to cleanly afford the corresponding monomeric anion-ligated (OAc- (6), or Cl- (7)) or solvent-ligated (MeCN (4)) derivatives. Addition of OH- converts [FeIII(SMe2N4(tren))(MeCN2+ (4) back to mu-oxo 3. Thus, mu-oxo bridge cleavage is reversible. The protonated mu-hydroxo-bridged intermediate is not observed. In an attempt to prevent mu-oxo dimer formation, and facilitate the observation of O2-bound intermediates, a bulkier tertiary amine ligand, tren-Et4= N-(2-amino-ethyl)-N-(2-diethylamino-ethyl)-N',N'-diethyl-ethane-1,2-diamine, and the corresponding [FeII(SMe2N4(tren-Et4))]+ (5) complex was synthesized and structurally characterized. Steric repulsive interactions create unusually long FeII-N(3,4) amine bonds in 5 (mean distance=2.219(1) A). The [(tren-Et4)N4SMe2]1- ligand is unable to accommodate iron in the +3 oxidation state, and consequently, in contrast to most thiolate-ligated Fe(II) complexes, [FeII(SMe2N4(tren-Et4))]+ (5) does not readily react with O2. Oxidation of 5 is irreversible, and the potential (Epa=+410 mV (vs SCE)) is anodically shifted relative to 1 (E1/2=-100 mV (vs SCE)).

Allosteric transition pathways in the lactose repressor protein core domains: asymmetric motions in a homodimer

The crystal structures of lactose repressor protein (LacI) provide static endpoint views of the allosteric transition between DNA- and IPTG-bound states. To obtain an atom-by-atom description of the pathway between these two conformations, motions were simulated with targeted molecular dynamics (TMD). Strikingly, this homodimer exhibited asymmetric dynamics. All asymmetries observed in this simulation are reproducible and can begin on either of the two monomers. Asymmetry in the simulation originates around D149 and was traced back to the pre-TMD equilibrations of both conformations. In particular, hydrogen bonds between D149 and S193 adopt a variety of configurations during repetitions of this process. Changes in this region propagate through the structure via noncovalent interactions of three interconnected pathways. The changes of pathway 1 occur first on one monomer. Alterations move from the inducer-binding pocket, through the N-subdomain beta-sheet, to a hydrophobic cluster at the top of this region and then to the same cluster on the second monomer. These motions result in changes at (1) side chains that form an interface with the DNA-binding domains and (2) K84 and K84', which participate in the monomer-monomer interface. Pathway 2 reflects consequent reorganization across this subunit interface, most notably formation of a H74-H74rsquo; pi-stacking intermediate. Pathway 3 extends from the rear of the inducer-binding pocket, across a hydrogen-bond network at the bottom of the pocket, and transverses the monomer-monomer interface via changes in H74 and H74rsquo;. In general, intermediates detected in this study are not apparent in the crystal structures. Observations from the simulations are in good agreement with biochemical data and provide a spatial and sequential framework for interpreting existing genetic data.

Gene regulation by tetracyclines

Gene regulation by tetracyclines has become a widely-used tool to study gene functions in pro- and eukaryotes. This regulatory system originates from Gram-negative bacteria, in which it fine-tunes expression of a tetracycline-specific export protein mediating resistance against this antibiotic. This review attempts to describe briefly the selective pressures governing the evolution of tetracycline regulation, which have led to the unique regulatory properties underlying its success in manifold applications. After discussing the basic mechanisms we will present the large variety of designed alterations of activities which have contributed to the still growing tool-box of components available for adjusting the regulatory properties to study gene functions in different organisms or tissues. Finally, we provide an overview of the various experimental setups available for pro- and eukaryotes, and touch upon some highlights discovered by the use of tetracycline-dependent gene regulation.

Bis(pyrazol-1-yl)acetates as Tripodal Heteroscorpionate Ligands in Iron Chemistry: Syntheses and Structures of Iron(II) and Iron(III) Complexes with bpza, bdmpza, and bdtbpza Ligands

The molecular structure of the previously reported species "[Fe(bdtbpza)Cl]" has been revealed by X-ray structure determination to be a ferrous dimer [Fe(bdtbpza)Cl](2) (2c) [bdtbpza = bis(3,5-di-tert-butylpyrazol-1-yl)acetate]. The syntheses of ferrous 2:1 complexes [Fe(bpza)(2)] (3a) and [Fe(bdtbpza)(2)] (3c) as well as ferric 1:1 complexes [NEt(4)][Fe(bpza)Cl(3)] (4a) and [NEt(4)][Fe(bdmpza)Cl(3)] (4b) [bpza = bis(pyrazol-1-yl)acetate, bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] are reported. Complexes 3a, previously reported [Fe(bdmpza)(2)] (3b), and 3c are high-spin. No spin crossover to the low-spin state was observed in the temperature range of 5-350 K. 4a and 4b are synthesized in one step and in high yield from [NEt(4)](2)[Cl(3)FeOFeCl(3)]. 4a and 4b are iron(III) high-spin complexes. Crystallographic information: 2c (C(24)H(39)ClFeN(4)O(2).CH(2)Cl(2).CH(3)CN) is triclinic, P1, a = 12.171(16) A, b = 12.851(14) A, c = 13.390(13) A, alpha = 98.61(9) degrees, beta = 113.51(11) degrees, gamma = 108.10(5) degrees, Z = 2; 3a (C(8)H(7)Fe(0.5)N(4)O(2)) is monoclinic, P2(1)/n, a = 7.4784(19) A, b = 7.604(3) A, c = 16.196(4) A, beta = 95.397(9) degrees, Z = 4; 3c (C(24)H(39)Fe(0.5)N(4)O(2)) is monoclinic, P2(1)/n, a = 9.939(6) A, b = 18.161(10) A, c = 13.722(8) A, beta = 97.67(7) degrees, Z = 4; 4b (C(20)H(35)Cl(3)FeN(5)O(2)) is monoclinic, C2/c, a = 30.45(6) A, b = 12.33(2) A, c = 16.17(3) A, beta = 118.47(5) degrees, Z = 8.

Gene regulation by tetracyclines. Constraints of resistance regulation in bacteria shape TetR for application in eukaryotes

The Tet repressor protein (TetR) regulates transcription of a family of tetracycline (tc) resistance determinants in Gram-negative bacteria. The resistance protein TetA, a membrane-spanning H+-[tc.M]+ antiporter, must be sensitively regulated because its expression is harmful in the absence of tc, yet it has to be expressed before the drugs' concentration reaches cytoplasmic levels inhibitory for protein synthesis. Consequently, TetR shows highly specific tetO binding to reduce basal expression and high affinity to tc to ensure sensitive induction. Tc can cross biological membranes by diffusion enabling this inducer to penetrate the majority of cells. These regulatory and pharmacological properties are the basis for application of TetR to selectively control the expression of single genes in lower and higher eukaryotes. TetR can be used for that purpose in some organisms without further modifications. In mammals and in a large variety of other organisms, however, eukaryotic transcriptional activator or repressor domains are fused to TetR to turn it into an efficient regulator. Mechanistic understanding and the ability to engineer and screen for mutants with specific properties allow tailoring of the DNA recognition specificity, the response to inducer tc and the dimerization specificity of TetR-based eukaryotic regulators. This review provides an overview of the TetR properties as they evolved in bacteria, the functional modifications necessary to transform it into a convenient, specific and efficient regulator for use in eukaryotes and how the interplay between structure--function studies in bacteria and specific requirements of particular applications in eukaryotes have made it a versatile and highly adaptable regulatory system.

Evidence for cooperativity between the four binding sites of dimeric ArsD, an As(III)-responsive transcriptional regulator

ArsD is a trans-acting repressor of the arsRDABC operon that confers resistance to arsenicals and antimonials in Escherichia coli. It possesses two-pairs of vicinal cysteine residues, Cys(12)-Cys(13) and Cys(112)-Cys(113), that potentially form separate binding sites for the metalloids that trigger dissociation of ArsD from the operon. However, as a homodimer it has four vicinal cysteine pairs. Titration of the steady-state fluorescence of ArsD with metalloids revealed positive cooperativity, with a Hill coefficient of 2, between these sites. Disruption of the Cys(112)-Cys(113) site by mutagenesis of arsD, but not the Cys(12)-Cys(13) site, largely abolished this cooperativity, indicative of interactions between adjacent Cys(112)-Cys(113) sites within the dimer. The kinetics of metalloid binding were determined by stopped flow spectroscopy; the rate increased in a sigmoidal manner, with a Hill coefficient of 4, indicating that the pre-steady-state measurements reported cooperativity between all four sites of the dimer rather than just the intermolecular interactions reported by the steady-state measurements. The kinetics of Sb(III) displacement by As(III) revealed that the metalloid-binding sites behave differentially, with the rapid exchange of As(III) for Sb(III) at one site retarding the release of Sb(III) from the other sites. We propose a model involving the sequential binding and release of metalloids by the four binding sites of dimeric ArsD, with only one site releasing free metalloids.

Fine-tuning function: correlation of hinge domain interactions with functional distinctions between LacI and PurR

LacI and PurR are highly homologous proteins. Their functional units are homodimers, with an N-terminal DNA binding domain that comprises the helix-turn-helix (HTH), N-linker, and hinge regions from both monomers. Hinge structural changes are known to occur upon DNA dissociation but are difficult to monitor experimentally. The initial steps of hinge unfolding were therefore examined using molecular dynamics simulations, utilizing a truncated, chimeric protein comprising the LacI HTH/N-linker and PurR hinge. A terminal Gly-Cys-Gly was added to allow "dimerization" through disulfide bond formation. Simulations indicate that differences in LacI and PurR hinge primary sequence affect the quaternary structure of the hinge x hinge' interface. However, these alternate hinge orientations would be sterically restricted by the core domain. These results prompted detailed comparison of recently available DNA-bound structures for LacI and truncated LacI(1-62) with the PurR structure. Examination revealed that different N-linker and hinge contacts to the core domain of the partner monomer (which binds effector molecule) affect the juxtapositions of the HTH, N-linker, and hinge regions in the DNA binding domain. In addition, the two full-length repressors exhibit significant differences in the interactions between the core and the C-linker connection to the DNA binding domain. Both linkers and the hinge have been implicated in the allosteric response of these repressors. Intriguingly, one functional difference between these two proteins is that they exhibit opposite allosteric response to effector. Simulations and observed structural distinctions are correlated with mutational analysis and sequence information from the LacI/GalR family to formulate a mechanism for fine-tuning individual repressor function.

An Escherichia coli biosensor strain for amplified and high throughput detection of antimicrobial agents

We report here the construction of a bacterial reporter system for high-throughput screening of antimicrobial agents. The test organism is the Escherichia coli K-12 strain carrying luciferase genes luxC, luxD, luxA, luxB, and luxE from the bioluminescent bacterium Photorhabdus luminescens in a runaway replication plasmid. The replication of the plasmid can be induced, resulting in a change of the plasmid copy number from 1-2/cell to several hundreds per cell within tens of minutes. This increase in plasmid copies is independent of the replication of the host cells. The system will therefore amplify the effects of antibiotics inhibiting bacterial replication machinery, such as fluoroquinolones, and the inhibitory effects can be measured in real time by luminometry. The biosensor was compared with a strain engineered to emit light constitutively, and it was shown to be much more sensitive to various antibiotics than conventional overnight cultivation methods. The approach shows great potential for high-throughput screening of new compounds.

Regulated assembly of transcription factors and control of transcription initiation

Proteins that function in regulation of transcription initiation are typically homo or hetero-oligomeric. Results of recent biophysical studies of transcription regulators indicate that the assembly of these proteins is often subject to regulation. This regulation of assembly dictates the frequency of transcription initiation via its influence on the affinity of a transcription regulator for DNA and its affect on target site selection. Factors that modulate transcription factor assembly include binding of small molecules, post-translational modification, DNA binding and interactions with other proteins. Here, the results of recent structural and/or thermodynamic studies of a number of transcription regulators that are subject to regulated assembly are reviewed. The accumulated data indicate that this phenomenon is ubiquitous and that mechanisms utilized in eukaryotes and prokaryotes share common features.

"Intermolecular" trapping of a nonheme Fe(IV)=O intermediate

The reactions of Fe(III)(TPA) (TPA = tris(2-pyridylmethyl)amine) complexes with 2-methyl-1-phenyl-2-propyl-hydroperoxide (MPPH) delivered by syringe pump under anaerobic conditions afford nearly quantitative conversion of MPPH to products derived from the benzyl radical. These results unequivocally show that MPPH breaks down by O-O bond homolysis, leading to the formation of the benzyl radical and a high valent Fe(IV)=O species. Without added substrates, the benzyl radical reacts with the high valent species to form benzyl alcohol or benzyl halides. The Fe(IV)=O species can also effect the two-electron oxidation of added substrates such as thioanisole, cyclohexanol, and cyclooctene under appropriate conditions. The oxidation of thioanisole and cyclohexanol is likely facilitated by pre-equilibrium binding of the substrate to the metal center, allowing these substrates to intercept the high valent iron-oxo species as it forms. These results suggest the importance of close proximity to direct the high valent metal center down a desired pathway.

Plasticity of quaternary structure: twenty-two ways to form a LacI dimer

The repressor proteins of the LacI/GalR family exhibit significant similarity in their secondary and tertiary structures despite less than 35% identity in their primary sequences. Furthermore, the core domains of these oligomeric repressors, which mediate dimerization, are homologous with the monomeric periplasmic binding proteins, extending the issue of plasticity to quaternary structure. To elucidate the determinants of assembly, a structure-based alignment has been created for three repressors and four periplasmic binding proteins. Contact maps have also been constructed for the three repressor interfaces to distinguish any conserved interactions. These analyses show few strict requirements for assembly of the core N-subdomain interface. The interfaces of repressor core C-subdomains are well conserved at the structural level, and their primary sequences differ significantly from the monomeric periplasmic binding proteins at positions equivalent to LacI 281 and 282. However, previous biochemical and phenotypic analyses indicate that LacI tolerates many mutations at 281. Mutations at LacI 282 were shown to abrogate assembly, but for Y282D this could be compensated by a second-site mutation in the core N-subdomain at K84 to L or A. Using the link between LacI assembly and function, we have further identified 22 second-site mutations that compensate the Y282D dimerization defect in vivo. The sites of these mutations fall into several structural regions, each of which may influence assembly by a different mechanism. Thus, the 360-amino acid scaffold of LacI allows plasticity of its quaternary structure. The periplasmic binding proteins may require only minimal changes to facilitate oligomerization similar to the repressor proteins.