Plasmofluidic single-molecule surface-enhanced Raman scattering from dynamic assembly of plasmonic nanoparticles

Sensing Thermophoretic Forces by Nanoplasmonic Actuators with Interferometric Scattering Readout

Noble metal nanoparticles (NPs) represent nanoscale, optically addressable heat sources whose temperature gradients give rise to thermophoretic forces that can act back on the NPs. Herein we investigate 20 nm Ag NPs bound via molecular tethers to a 20 nm thin Au film as nanoplasmonic actuators that generate a local temperature gradient and simultaneously act as optical sensors of forces that induce their displacement from their equilibrium position. Forces of sufficient magnitude to affect the NP-film distance modulate the interferometric scattering (iSCAT) signal of the individual NPs and become detectable due to the distance-dependent damping of the NP scattering in the vicinity of the metal film. With total incident power densities within a range between 1.40 and 4.80 kW cm-2, the experiments reveal a continuous decay in the NP iSCAT signal, consistent with a decrease in the NP-film separation due to an attractive thermophoretic force.

An ultrasensitive paper-based SERS sensor for detection of nucleolin using silver-nanostars, plastic antibodies and natural antibodies

A state-of-the-art, ultrasensitive, paper-based SERS sensor has been developed using silver nanostars (AgNSs) in combination with synthetic and natural antibodies. A key component of this innovative sensor is the plastic antibody, which was synthesized using molecularly imprinted polymer (MIP) technology. This ground-breaking combination of paper substrates/MIPs with AgNSs, which is similar to a sandwich immunoassay, is used for the first time with the aim of SERS detection and specifically targets nucleolin (NCL), a cancer biomarker. The sensor device was carefully fabricated by synthesizing a polyacrylamide-based MIP on cellulose paper (Whatman Grade 1 filter) by photopolymerization. The binding of NCL to the MIP was then confirmed by natural antibody binding using a sandwich assay for quantitative SERS analysis. To facilitate the detection of NCL, antibodies were pre-bound to AgNSs with a Raman tag so that the SERS signal could indicate the presence of NCL. The composition of the sensory layers/materials was meticulously optimized. The intensity of the Raman signal at ∼1078 cm-1 showed a linear trend that correlated with increasing concentrations of NCL, ranging from 0.1 to 1000 nmol L-1, with a limit of detection down to 0.068 nmol L-1 in human serum. The selectivity of the sensor was confirmed by testing its analytical response in the presence of cystatin C and lysozyme. The paper-based SERS detection system for NCL is characterized by its simplicity, sustainability, high sensitivity and stability and thus embodies essential properties for point-of-care applications. This approach is promising for expansion to other biomarkers in various fields, depending on the availability of synthetic and natural antibodies.

High-Speed Fluctuation Analysis of Silver-Nanoparticle SERS in Solutions

We analyzed the fluctuation of surface-enhanced Raman spectra with a temporal resolution of 25 ms using a conventional electron-multiplying charge-coupled device camera experimental setup. The signal-to-noise ratio of the spectra was improved using density-based spatial cluster analysis with noise. Silver nanoparticles (AgNPs) with different sizes were dispersed as surface-enhanced Raman spectroscopy platforms in violet aqueous solutions. The movement of AgNPs and the fluctuation of the spectra were characterized. The fluctuation (signal ON and OFF) was evaluated on the basis of the time intervals between ON and OFF timing. The behavior of each AgNP solution was explained by a two-dimensional random walk model, which means that the phenomenon was mainly governed by the Brownian motion of the AgNPs in the solution. The fluctuation was also compared among three different Raman modes, one of which showed anomalous behavior.

Deterministic positioning and alignment of a single-molecule exciton in plasmonic nanodimer for strong coupling

Experimental realization of strong coupling between a single exciton and plasmons remains challenging as it requires deterministic positioning of the single exciton and alignment of its dipole moment with the plasmonic fields. This study aims to combine the host-guest chemistry approach with the cucurbit[7]uril-mediated active self-assembly to precisely integrate a single methylene blue molecule in an Au nanodimer at the deterministic position (gap center of the nanodimer) with the maximum electric field (EFmax) and perfectly align its transition dipole moment with the EFmax, yielding a large spectral Rabi splitting of 116 meV for a single-molecule exciton-matching the analytical model and numerical simulations. Statistical analysis of vibrational spectroscopy and dark-field scattering spectra confirm the realization of the single exciton strong coupling at room temperature. Our work may suggest an approach for achieving the strong coupling between a deterministic single exciton and plasmons, contributing to the development of room-temperature single-qubit quantum devices.

Perspective on Tailored Nanostructure-Dominated SPP Effects for SERS

Localized surface plasmon resonance (LSPR) excited by an incident light can normally produce strong surface-enhanced Raman scattering (SERS) at the nanogaps among plasmonic nano-objects (so-called hot spots), which is extensively explored. In contrast, surface plasmon polaritons (SPPs) that can be generated by an incident beam via particular structures with a conservation of wave vectors can excite SERS effects as well. SPPs actually play an indispensable role in high-performance SERS devices but receive much less attention. In this perspective, SPPs and their couplings with LSPR for SERS excitations with differing effectiveness through particular plasmonic/dielectric structures/configurations, along with relevant fabrication approaches, are profoundly reviewed and commented on from a unique perspective from in situ to ex situ excitations of SERS enabled by spatiotemporally separated multiple processes of SPPs. Quantitative design of particular configurations/architectures enabling highly efficient and effective multiple processes of SPPs is particularly emphasized as one giant leap toward ultimate full quantitative design of intrinsically high-performance SERS chips and very critical for their batch manufacturability and applications as well. The viewpoints and prospects about innovative SERS devices based on tailored structure-dominated SPPs effects and their coupling with LSPR are presented and discussed.

Plasmonic hotspot arrays boost second harmonic generation in thin-film lithium niobate

Focusing light down to subwavelength scales to enhance the light-matter interaction has been highly sought after, which has promoted significant researches and applications in nanophotonics. Plasmonic nanoantennae are a significant tool to achieve this goal since they can confine light into ultra-small volumes far below the diffraction limit. However, metallic materials have the property of central symmetry, resulting in weak second-order nonlinear effects. Here, we design plasmonic bowtie nanoantennae on thin-film lithium niobate (TFLN) for deep-subwavelength light confinement to boost the second-harmonic generation (SHG) in TFLN via the plasmonic hotspot enhancement. The SHG enhancement factor of about 20 times as compared to unpatterned TFLN is achieved in the experiment when resonantly excited by femtosecond laser. This work proposes a route for subwavelength nonlinear optics on the TFLN platform.

DNA-Driven Dynamic Assembly/Disassembly of Inorganic Nanocrystals for Biomedical Imaging

DNA-mediated programming is emerging as an effective technology that enables controlled dynamic assembly/disassembly of inorganic nanocrystals (NC) with precise numbers and spatial locations for biomedical imaging applications. In this review, we will begin with a brief overview of the rules of NC dynamic assembly driven by DNA ligands, and the research progress on the relationship between NC assembly modes and their biomedical imaging performance. Then, we will give examples on how the driven program is designed by different interactions through the configuration switching of DNA-NC conjugates for biomedical applications. Finally, we will conclude with the current challenges and future perspectives of this emerging field. Hopefully, this review will deepen our knowledge on the DNA-guided precise assembly of NCs, which may further inspire the future development of smart chemical imaging devices and high-performance biomedical imaging probes.

Opto-thermoelectric trapping of fluorescent nanodiamonds on plasmonic nanostructures

Deterministic optical manipulation of fluorescent nanodiamonds (FNDs) in fluids has emerged as an experimental challenge in multimodal biological imaging. Designing and developing nano-optical trapping strategies to serve this purpose is an important task. In this Letter, we show how chemically prepared gold nanoparticles and silver nanowires can facilitate an opto-thermoelectric force to trap individual entities of FNDs using a long working distance lens, low power-density illumination (532-nm laser, 12 µW/µm²). Our trapping configuration combines the thermoplasmonic fields generated by individual plasmonic nanoparticles and the opto-thermoelectric effect facilitated by the surfactant to realize a nano-optical trap down to a single FND that is 120 nm in diameter. We use the same trapping excitation source to capture the spectral signatures of single FNDs and track their position. By tracking the FND, we observe the differences in the dynamics of the FND around different plasmonic structures. We envisage that our drop-casting platform can be extrapolated to perform targeted, low-power trapping, manipulation, and multimodal imaging of FNDs inside biological systems such as cells.

Lossless enrichment of trace analytes in levitating droplets for multiphase and multiplex detection

Concentrating a trace amount of molecules from liquids, solid objects, or the gas phase and delivering them to a localized area are crucial for almost any trace analyte detection device. Analytes within a liquid droplet resting on micro/nanostructured surfaces with liquid-repellent coatings can be concentrated during solvent evaporation. However, these coatings suffer from complex manufacturing procedures, poor versatility, and limited analyte enrichment efficiency. Here, we report on the use of an acoustic levitation platform to losslessly concentrate the analyte molecules dissolved in any volatile liquid, attached to solid objects, or spread in air. Gold nanoparticles can be simultaneously concentrated with the analytes in different phases, realizing sensitive, surface-enhanced Raman scattering detection even at attomolar (10^-18 mol/L) concentration levels. The acoustic levitation platform-enabled, lossless analyte enrichment can significantly increase the analytical performance of many conventional microsensing techniques.

Plasmonic-Thermoelectric Nanotweezers for Immersive SERS Mapping

Surface-enhanced Raman spectroscopy (SERS) technology usually uses metallic nanoparticles to enhance Raman scattering signals, thereby significantly adding to molecule-level recognition and detection. However, realization of nanometer-scaled SERS imaging in liquid environments is extremely difficult due to the requirements of both precise scanning of single metallic nanoparticle and high enhancement field and thus has never been achieved before. To overcome this obstacle, we demonstrate an immersive nanometer-scaled SERS mapping technology, based on dynamic scanning of a single metallic nanoparticle with a plasmonic-thermoelectric nanotweezers system. The technology offers greater stability in the plasmonic trapping of gold nanoparticles at relative low power, as well as generating higher electric fields in the gap region. Through its dynamics, two-dimensional nanometer-scaled SERS imaging is achieved successfully. In regard to in liquid environments, this technology provides a mapping method for label-free imaging of ultrathin materials, structures, and biological samples.

Porous spherical gold nanoparticles via a laser induced process

Nanoparticles consisting of a mixture of several metals and also porous nanoparticles due to their special structure exhibit properties that find applications in spectroscopic detection or catalysis. Different approaches of top down or bottom up technologies exist for the fabrication of such particles. We present a novel combined approach for the fabrication of spherical porous gold nanoparticles on low-cost glass substrates under ambient conditions using a UV-laser induced particle preparation process with subsequent wet chemical selective etching. In this preparation route, nanometer-sized branched structures are formed in spherical particles. The laser process, which is applied to a silver/gold bilayer system with different individual layer thicknesses, generates spherical mixed particles in a nanosecond range and influences the properties of the fabricated nanoparticles, such as the size and the mixture and thus the spectral response. The subsequent etching process is performed by selective wet chemical removal of silver from the nanoparticles with diluted nitric acid. The gold to silver ratio was investigated by energy-dispersive X-ray spectroscopy. The porosity depends on laser parameters and film thickness as well as on etching parameters such as time. After etching, the surface area of the remaining Au nanoparticles increases which makes these particles interesting for catalysis and also as carrier particles for substances. Such substances can be positioned at defined locations or be released in appropriate environments. Absorbance spectra are also analyzed to show how the altered fractured shape of the particles changes localized plasmon resonances of the resultingt particles.

The perspectives of broadband metasurfaces and photo-electric tweezer applications

With strong demands of real-time monitoring of biomolecules or environmental pollutants, overcoming technical hurdles on control and detection of freely diffusive nanoscale objects become a question of issue to solve in a variety of research fields. Most existing optical techniques inevitably require labeling to the target material, which sometimes denature the measuring biomaterials. For highly efficient real-time monitoring without complicated pretreatment or labeling, many successes in development of label-free or non-destructive detection techniques via increased sensitivity were accomplished by the additional structures. Metasurface-based two-dimensional photonic/electric devices have recently represented extraordinary performances in both manipulation and sensing for various small particles and biochemical species, repeatedly overcoming the limit of detection achieved right before. In parallel, various metasurface-based devices were also introduced promoting transportation of targets into optical hotspot sites, overcoming diffusion limits. We noted this point, therefore, reviewed two major research fields such as metasurface-assisted material sensing and transportation technologies that have contributed to present prospective sensing technologies, then showed perspective views on how great synergy can be created when two technologies are cleverly integrated. Recently, a trend of conceptual merging of optical detection and transporting schemes beyond both diffraction limit and diffusion limit leads to a creation of exceptional performance in molecular detections. In this review, the trends of the latest technologies accomplishing this purpose by hybridization of various composite materials and functional metasurfaces will be introduced.

Development of a Photonic Switch via Electro-Capillarity-Induced Water Penetration Across a 10-nm Gap

With narrow and dense nanoarchitectures increasingly adopted to improve optical functionality, achieving the complete wetting of photonic devices is required when aiming at underwater molecule detection over the water-repellent optical materials. Despite continuous advances in photonic applications, real-time monitoring of nanoscale wetting transitions across nanostructures with 10-nm gaps, the distance at which photonic performance is maximized, remains a chronic hurdle when attempting to quantify the water influx and molecules therein. For this reason, the present study develops a photonic switch that transforms the wetting transition into perceivable color changes using a liquid-permeable Fabry-Perot resonator. Electro-capillary-induced Cassie-to-Wenzel transitions produce an optical memory effect in the photonic switch, as confirmed by surface-energy analysis, simulations, and an experimental demonstration. The results show that controlling the wetting behavior using the proposed photonic switch is a promising strategy for the integration of aqueous media with photonic hotspots in plasmonic nanostructures such as biochemical sensors.

Wearable plasmonic paper-based microfluidics for continuous sweat analysis

Wearable sweat sensors have the potential to provide clinically meaningful information associated with the health and disease states of individuals. Current sensors mainly rely on enzymes and antibodies as biorecognition elements to achieve specific quantification of metabolite and stress biomarkers in sweat. However, enzymes and antibodies are prone to degrade over time, compromising the sensor performance. Here, we introduce a wearable plasmonic paper-based microfluidic system for continuous and simultaneous quantitative analysis of sweat loss, sweat rate, and metabolites in sweat. Plasmonic sensors based on label-free surface-enhanced Raman spectroscopy (SERS) can provide chemical "fingerprint" information for analyte identification. We demonstrate the sensitive detection and quantification of uric acid in sweat at physiological and pathological concentrations. The well-defined flow characteristics of paper microfluidic devices enable accurate quantification of sweat loss and sweat rate. The wearable plasmonic device is soft, flexible, and stretchable, which can robustly interface with the skin without inducing chemical or physical irritation.

Heat-Mediated Optical Manipulation

Progress in optical manipulation has stimulated remarkable advances in a wide range of fields, including materials science, robotics, medical engineering, and nanotechnology. This Review focuses on an emerging class of optical manipulation techniques, termed heat-mediated optical manipulation. In comparison to conventional optical tweezers that rely on a tightly focused laser beam to trap objects, heat-mediated optical manipulation techniques exploit tailorable optothermo-matter interactions and rich mass transport dynamics to enable versatile control of matter of various compositions, shapes, and sizes. In addition to conventional tweezing, more distinct manipulation modes, including optothermal pulling, nudging, rotating, swimming, oscillating, and walking, have been demonstrated to enhance the functionalities using simple and low-power optics. We start with an introduction to basic physics involved in heat-mediated optical manipulation, highlighting major working mechanisms underpinning a variety of manipulation techniques. Next, we categorize the heat-mediated optical manipulation techniques based on different working mechanisms and discuss working modes, capabilities, and applications for each technique. We conclude this Review with our outlook on current challenges and future opportunities in this rapidly evolving field of heat-mediated optical manipulation.

Testing and diagnosis of SARS-CoV-2 infection

The recent outbreak of the coronavirus disease 2019 (COVID-19) has rapidly spread around the world since its discovery in China, in December 2019. The current standard method for determining whether a patient is infected with the SARS-CoV-2 virus involves taking a nasal or throat swab sample, which is then sent to laboratories for testing. The laboratories then use polymerase chain reaction (PCR)-based technology on respiratory specimens remain the gold standard to determine if the genetic material of the virus is present in the sample and use this information to diagnose the patient. However, serologic immunoassays and point-of-care technologies are rapidly emerging with high specificity and sensitivity as well. Even if there are excellent techniques for diagnosing symptomatic patients with COVID-19 in equipped laboratories, critical gaps still exist in the screening of asymptomatic individuals who are in the incubation phase of the virus, as well as in the accurate determination of live virus shedding during convalescence to inform decisions for ending isolation.

Single Molecule Surface Enhanced Raman Scattering in a Single Gold Nanoparticle-Driven Thermoplasmonic Tweezer

Surface enhanced Raman scattering (SERS) is optically sensitive and chemically specific to detect single-molecule spectroscopic signatures. Facilitating this capability in optically trapped nanoparticles at low laser power remains a significant challenge. In this letter, we show single molecule SERS signatures in reversible assemblies of trapped plasmonic nanoparticles using a single laser excitation (633 nm). Importantly, this trap is facilitated by the thermoplasmonic field of a single gold nanoparticle dropcasted on a glass surface. We employ the bianalyte SERS technique to ascertain the single molecule statistical signatures and identify the critical parameters of the thermoplasmonic tweezer that provide this sensitivity. Furthermore, we show the utility of this low power (≈ 0.1 mW/μm²) tweezer platform to trap a single gold nanoparticle and transport assembly of nanoparticles. Given that our configuration is based on a dropcasted gold nanoparticle, we envisage its utility to create reconfigurable plasmonic metafluids in physiological and catalytic environments and to be potentially adapted as an in vivo plasmonic tweezer.

Optothermal pulling, trapping, and assembly of colloids using nanowire plasmons

Optical excitation of colloids can be harnessed to realize soft matter systems that are out of equilibrium. In this paper, we present our experimental studies on the dynamics of silica colloids in the vicinity of a silver nanowire propagating surface plasmon polaritons (SPPs). Due to the optothermal interaction, the colloids are directionally pulled towards the excitation point of the nanowire. Having reached this point, they are spatio-temporally trapped around the excitation location. By increasing the concentration of colloids in the system, we observe multi-particle assembly around the nanowire. This process is thermophoretically driven and assisted by the SPPs. Furthermore, we find such an assembly to be sensitive to the excitation polarization at the input of the nanowire. Numerically-simulated temperature distribution around an illuminated nanowire corroborates sensitivity to the excitation polarization. Our study will find relevance in exploration of SPP-assisted optothermal pulling, trapping and assembly of colloids, and can serve as a test-bed of plasmon-driven active matter.

Accessing Plasmonic Hotspots Using Nanoparticle-on-Foil Constructs

Metal-insulator-metal (MIM) nanogaps in the canonical nanoparticle-on-mirror geometry (NPoM) provide deep-subwavelength confinement of light with mode volumes smaller than V/V _λ < 10^-6. However, access to these hotspots is limited by the impendence mismatch between the high in-plane k _∥ of trapped light and free-space plane-waves, making the in- and out-coupling of light difficult. Here, by constructing a nanoparticle-on-foil (NPoF) system with thin metal films, we show the mixing of insulator-metal-insulator (IMI) modes and MIM gap modes results in MIMI modes. This mixing provides multichannel access to the plasmonic nanocavity through light incident from both sides of the metal film. The red-tuning and near-field strength of MIMI modes for thinner foils is measured experimentally with white-light scattering and surface-enhanced Raman scattering from individual NPoFs. We discuss further the utility of NPoF systems, since the geometry allows tightly confined light to be accessed simply through different ports.

SERS Based Lateral Flow Immunoassay for Point-of-Care Detection of SARS-CoV-2 in Clinical Samples

The current scenario, an ongoing pandemic of COVID-19, places a dreadful burden on the healthcare system worldwide. Subsequently, there is a need for a rapid, user-friendly, and inexpensive on-site monitoring system for diagnosis. The early and rapid diagnosis of SARS-CoV-2 plays an important role in combating the outbreak. Although conventional methods such as PCR, RT-PCR, and ELISA, etc., offer a gold-standard solution to manage the pandemic, they cannot be implemented as a point-of-care (POC) testing arrangement. Moreover, surface-enhanced Raman spectroscopy (SERS) having a high enhancement factor provides quantitative results with high specificity, sensitivity, and multiplex detection ability but lacks in POC setup. In contrast, POC devices such as lateral flow immunoassay (LFIA) offer rapid, simple-to-use, cost-effective, reliable platform. However, LFIA has limitations in quantitative and sensitive analyses of SARS-CoV-2 detection. To resolve these concerns, herein we discuss a unique modality that is an integration of SERS with LFIA for quantitative analyses of SARS-CoV-2. The miniaturization ability of SERS-based devices makes them promising in biosensor application and has the potential to make a better alternative of conventional diagnostic methods. This review also demonstrates the commercially available and FDA/ICMR approved LFIA kits for on-site diagnosis of SARS-CoV-2.

Plasmonic tweezers: for nanoscale optical trapping and beyond

Optical tweezers and associated manipulation tools in the far field have had a major impact on scientific and engineering research by offering precise manipulation of small objects. More recently, the possibility of performing manipulation with surface plasmons has opened opportunities not feasible with conventional far-field optical methods. The use of surface plasmon techniques enables excitation of hotspots much smaller than the free-space wavelength; with this confinement, the plasmonic field facilitates trapping of various nanostructures and materials with higher precision. The successful manipulation of small particles has fostered numerous and expanding applications. In this paper, we review the principles of and developments in plasmonic tweezers techniques, including both nanostructure-assisted platforms and structureless systems. Construction methods and evaluation criteria of the techniques are presented, aiming to provide a guide for the design and optimization of the systems. The most common novel applications of plasmonic tweezers, namely, sorting and transport, sensing and imaging, and especially those in a biological context, are critically discussed. Finally, we consider the future of the development and new potential applications of this technique and discuss prospects for its impact on science.

Full size microplastics in crab and fish collected from the mangrove wetland of Beibu Gulf: Evidences from Raman Tweezers (1-20 μm) and spectroscopy (20-5000 μm)

Microplastic pollution in organisms is a growing environmental concern worldwide. Current methods to identify microplastics (MPs) are subject to the limitations of analytical techniques, and there is no full-scale method to measure MPs in organisms. In this study, Raman Tweezers and spectroscopy methods were combined and applied to identify MPs in organisms within the size range of 1-5000 μm. The abundance of small MPs (1-20 μm) was measured in crab (0.39-2.83 items/individual) and fish (0.35-3.22 items/individual). Most MPs were transparent in color and pellet shape. The proportion of small MPs (1-20 μm) was 35.77%, and analysis revealed the non-inclusion of this fraction will induce large deviations in the overall measurement. The large MPs (20-5000 μm) were identified in crab and fish with abundances ranging from 0.74-4.96 items/individual and 0.72-5.39 items/individual, respectively. Mainly fiber shape items were detected, the dominant particle size ranged from 20 to 100 μm, and most MPs were white. Polyethylene (PE) and polyethylene terephthalate (PET) were the main types of MPs polymers detected. Our study fills the gap to provide a new method to detect MPs in organisms below 20 μm, facilitating study of the migration and transformation of small MPs in the environment.

Photo-assembly of plasmonic nanoparticles: methods and applications

In this review article, various methods for the light-induced manipulation of plasmonic nanoobjects are described, and some sample applications of this process are presented. The methods of the photo-induced nanomanipulation analyzed include methods based on: the light-induced isomerization of some compounds attached to the surface of the manipulated object causing formation of electrostatic, host-guest or covalent bonds or other structural changes, the photo-response of a thermo-responsive material attached to the surface of the manipulated nanoparticles, and the photo-catalytic process enhanced by the coupled plasmons in manipulated nanoobjects. Sample applications of the process of the photo-aggregation of plasmonic nanosystems are also presented, including applications in surface-enhanced vibrational spectroscopies, catalysis, chemical analysis, biomedicine, and more. A detailed comparative analysis of the methods that have been applied so far for the light-induced manipulation of nanostructures may be useful for researchers planning to enter this fascinating field.

Large-scale optothermal assembly of colloids mediated by a gold microplate

Light-activated colloidal assembly and swarming can act as model systems to explore non-equilibrium state of matter. In this context, creating new experimental platforms to facilitate and control two-dimensional assembly of colloidal crystals are of contemporary interest. In this paper, we present an experimental study of assembly of colloidal silica microparticles in the vicinity of a single-crystalline gold microplate evanescently excited by a 532 nm laser beam. The gold microplate acts as a source of heat and establishes a thermal gradient in the system. The created optothermal potential assembles colloids to form a two-dimensional poly-crystal, and we quantify the coordination number and hexagonal packing order of the assembly in such a driven system. Our experimental investigation shows that for a given particle size, the variation in assembly can be tuned as a function of excitation-polarization and surface to volume ratio of the gold microplates. Furthermore, we observe that the assembly is dependent on size of the particle and its material composition. Specifically, silica colloids assemble but polystyrene colloids do not, indicating an intricate behaviour of the forces under play. Our work highlights a promising direction in utilizing metallic microstructures that can be harnessed for optothermal colloidal crystal assembly and swarming studies. Our experimental system can be utilized to explore optically driven matter and photophoretic interactions in soft-matter including biological systems such as cells and micro organisms.

Raman Tweezers for Small Microplastics and Nanoplastics Identification in Seawater

Our understanding of the fate and distribution of micro- and nano- plastics in the marine environment is limited by the intrinsic difficulties of the techniques currently used for the detection, quantification, and chemical identification of small particles in liquid (light scattering, vibrational spectroscopies, and optical and electron microscopies). Here we introduce Raman Tweezers (RTs), namely optical tweezers combined with Raman spectroscopy, as an analytical tool for the study of micro- and nanoplastics in seawater. We show optical trapping and chemical identification of sub-20 μm plastics, down to the 50 nm range. Analysis at the single particle level allows us to unambiguously discriminate plastics from organic matter and mineral sediments, overcoming the capacities of standard Raman spectroscopy in liquid, intrinsically limited to ensemble measurements. Being a microscopy technique, RTs also permits one to assess the size and shapes of particles (beads, fragments, and fibers), with spatial resolution only limited by diffraction. Applications are shown on both model particles and naturally aged environmental samples, made of common plastic pollutants, including polyethylene, polypropylene, nylon, and polystyrene, also in the presence of a thin eco-corona. Coupled to suitable extraction and concentration protocols, RTs have the potential to strongly impact future research on micro and nanoplastics environmental pollution, and enable the understanding of the fragmentation processes on a multiscale level of aged polymers.

Polarization-controllably launching localized cosine-Gauss beam with spatially varied metallic nano-apertures

Two properly designed columns of orthogonally tilted and spatially varied nano-apertures have been demonstrated to achieve polarization-controlled launching of the localized cosine-Gauss beam, which is a kind of highly localized surface plasmonic wave without diffraction. According to the experimental results, the generated unidirectional propagating plasmonic beam could propagate with a non-diffracting length of up to 57μm as well as the extinction ratio of more than 150. We believe that our proposed device would play an important role in highly compact photonic circuit on-chip with plasmonic wave.

All-optical tunable plasmonic nano-aggregations for surface-enhanced Raman scattering

Interparticle forces play a crucial role in nanoparticle-based nanoscience and nanoengineering for synthesizing new materials, manipulating nanoscale structures, understanding biological processes and ultrasensitive sensing. Complicated by the fluid-dynamical and chemical nature of the liquid environment of nanoparticles, previous attempts are limited to electromagnetic and chemical methods. Alternatively, optically induced forces provide a convenient and fabrication-free route to manipulate nanoparticles at the nanoscale. Here we demonstrate a new double laser trapping scheme for metallic nano-aggregation by inducing strong near-field optical interparticle forces without any chemical agents or complicated fabrication processes. These induced optical forces arising from strong localized plasmon resonance strongly depend on the interparticle separation well beyond the diffraction limit and the polarization of the incident laser field. We examine such sub-resolved interparticle separation in trapped nanoaggregates by measuring surface-enhanced Raman scattering, and further demonstrate the single-molecule sensitivity by implementing such nanostructures. This new technique opens a new avenue for all-optical manipulation of nanomaterials as well as ultra-sensitive bio-chemical sensing applications.

Raman Techniques: Fundamentals and Frontiers

Driven by applications in chemical sensing, biological imaging and material characterisation, Raman spectroscopies are attracting growing interest from a variety of scientific disciplines. The Raman effect originates from the inelastic scattering of light, and it can directly probe vibration/rotational-vibration states in molecules and materials. Despite numerous advantages over infrared spectroscopy, spontaneous Raman scattering is very weak, and consequently, a variety of enhanced Raman spectroscopic techniques have emerged. These techniques include stimulated Raman scattering and coherent anti-Stokes Raman scattering, as well as surface- and tip-enhanced Raman scattering spectroscopies. The present review provides the reader with an understanding of the fundamental physics that govern the Raman effect and its advantages, limitations and applications. The review also highlights the key experimental considerations for implementing the main experimental Raman spectroscopic techniques. The relevant data analysis methods and some of the most recent advances related to the Raman effect are finally presented. This review constitutes a practical introduction to the science of Raman spectroscopy; it also highlights recent and promising directions of future research developments.

Advances in surface-enhanced Raman spectroscopy (SERS) substrates for lipid and protein characterization: sensing and beyond

Surface-enhanced Raman spectroscopy (SERS) has become an essential ultrasensitive analytical tool for biomolecular analysis of small molecules, macromolecular proteins, and even cells. SERS enables label-free, direct detection of molecules through their intrinsic Raman fingerprint. In particular, protein and lipid bilayers are dynamic three-dimensional structures that necessitate label-free methods of characterization. Beyond direct detection and quantitation, the structural information contained in SERS spectra also enables deeper biophysical characterization of biomolecules near metallic surfaces. Therefore, SERS offers enormous potential for such systems, although making measurements in a nonperturbative manner that captures the full range of interactions and activity remains a challenge. Many of these challenges have been overcome through advances in SERS substrate development, which have expanded the applications and targets of SERS for direct biomolecular quantitation and biophysical characterization. In this review, we will first discuss different categories of SERS substrates including solution-phase, solid-supported, tip-enhanced Raman spectroscopy (TERS), and single-molecule substrates for biomolecular analysis. We then discuss detection of protein and biological lipid membranes. Lastly, biophysical insights into proteins, lipids and live cells gained through SERS measurements of these systems are reviewed.

Photothermal-Assisted Optical Stretching of Gold Nanoparticles

The synergy of photothermal energy and optical forces generated by tightly focused laser beams can be used to transform the shape of gold nanoparticles. Here, the combination of these two effects is demonstrated to be an effective way of elongating gold nanoparticles (Au NPs), massively tuning their plasmonic properties. The photothermal effect of the laser increases the temperature of Au NPs above the melting point, and optical forces deform the molten Au NPs. As a result, the shape of Au NPs transforms from nanospheres into nanorods or dimers, depending on the power and time of irradiation as well as the surface energy of the substrate. This process is reversible by using high laser power to transform nanorods back to nanospheres due to capillary dewetting. Such light-induced transformations of nanostructures not only provide a facile way to tune plasmon resonances but also shed light on how the synergistic effect of photothermal energy and optical forces works on plasmonic nanoparticles.

Broadband single molecule SERS detection designed by warped optical spaces

Engineering hotspots is of crucial importance in many applications including energy harvesting, nano-lasers, subwavelength imaging, and biomedical sensing. Surface-enhanced Raman scattering spectroscopy is a key technique to identify analytes that would otherwise be difficult to diagnose. In standard systems, hotspots are realised with nanostructures made by acute tips or narrow gaps. Owing to the low probability for molecules to reach such tiny active regions, high sensitivity is always accompanied by a large preparation time for analyte accumulation which hinders the time response. Inspired by transformation optics, we introduce an approach based on warped spaces to manipulate hotspots, resulting in broadband enhancements in both the magnitude and volume. Experiments for single molecule detection with a fast soaking time are realised in conjunction with broadband response and uniformity. Such engineering could provide a new design platform for a rich manifold of devices, which can benefit from broadband and huge field enhancements.

In standard SERS the probability for the molecules to reach tiny hotpot regions is low. Here, the authors introduce an approach based on warped spaces that offers a strategy to manipulate hotspots of metallic nanostructures, resulting in large broadband enhancements in both the magnitude and the volume size.

Label-Free Optical Single-Molecule Micro- and Nanosensors

Label-free optical sensor systems have emerged that exhibit extraordinary sensitivity for detecting physical, chemical, and biological entities at the micro/nanoscale. Particularly exciting is the detection and analysis of molecules, on miniature optical devices that have many possible applications in health, environment, and security. These micro- and nanosensors have now reached a sensitivity level that allows for the detection and analysis of even single molecules. Their small size enables an exceedingly high sensitivity, and the application of quantum optical measurement techniques can allow the classical limits of detection to be approached or surpassed. The new class of label-free micro- and nanosensors allows dynamic processes at the single-molecule level to be observed directly with light. By virtue of their small interaction length, these micro- and nanosensors probe light-matter interactions over a dynamic range often inaccessible by other optical techniques. For researchers entering this rapidly advancing field of single-molecule micro- and nanosensors, there is an urgent need for a timely review that covers the most recent developments and that identifies the most exciting opportunities. The focus here is to provide a summary of the recent techniques that have either demonstrated label-free single-molecule detection or claim single-molecule sensitivity.

Light Driven Design of Dynamical Thermosensitive Plasmonic Superstructures: A Bottom-Up Approach Using Silver Supercrystals

When narrowly distributed silver nanoparticles (NPs) are functionalized by dodecanethiol, they acquire the ability to self-organize in organic solvents into 3D supercrystals (SCs). The NP surface chemistry is shown to introduce a light-driven thermomigration effect, thermophoresis. Using a laser beam to heat the NPs and generate steep thermal gradients, the migration effect is triggered dynamically, leading to tailored structures with high density of plasmonic hot spots. This work describes how to manipulate the hot spots and monitor the effect by holography, thus providing a complete characterization of the migration process on a single object basis. Extensive single object tracking strategies are employed to measure the SCs trajectories, evaluate their size, drift velocity magnitude and direction, allowing the identification of the physical chemical origins of the migration. The phenomenon is shown to happen as a result of the combination of thermophoresis (at short length scales) and convection (long-range), and does not require a metallic substrate. This constitutes a fully optical method to dynamically generate plasmonic platforms in situ and on demand, without requiring substrate nanostructuration and with minimal interference on the chemistry of the system. The importance of the proof-of-concept herein described stems from the numerous potential applications, spanning over a variety of fields such as microfluidics and biosensing.

Optical force decoration of 3D microstructures with plasmonic particles

Optical forces are used to push and aggregate gold nanorods onto several substrates creating surface-enhanced Raman scattering (SERS) active hot spots for Raman-based identification of proteins. By monitoring the increase of the protein SERS signal, we observe different aggregation times for different curvatures of the substrates. The slower aggregation dynamics on curved surfaces is justified by a simple geometrical model. In particular, this technique is used to decorate three-dimensional microstructures and to quickly realize hybrid micro/nanosensors for highly sensitive detection of biological material directly in a liquid environment.

High-contrast switching and high-efficiency extracting for spontaneous emission based on tunable gap surface plasmon

Controlling spontaneous emission at optical scale lies in the heart of ultracompact quantum photonic devices, such as on-chip single photon sources, nanolasers and nanophotonic detectors. However, achiving a large modulation of fluorescence intensity and guiding the emitted photons into low-loss nanophotonic structures remain rather challenging issue. Here, using the liquid crystal-tuned gap surface plasmon, we theoretically demonstrate both a high-contrast switching of the spontaneous emission and high-efficiency extraction of the photons with a specially-designed tunable surface plasmon nanostructures. Through varying the refractive index of liquid crystal, the local electromagnetic field of the gap surface plasmon can be greatly modulated, thereby leading to the swithching of the spontaneous emission of the emitter placed at the nanoscale gap. By optimizing the material and geometrical parameters, the total decay rate can be changed from 103γ0 to 8750γ0, [γ0 is the spontaneous emission rate in vacuum] with the contrast ratio of 85. Further more, in the design also enables propagation of the emitted photons along the low-loss phase-matched nanofibers with a collection efficiency of more than 40%. The proposal provides a novel mechanism for simultaneously switching and extracting the spontaneous emitted photons in hybrid photonic nanostructures, propelling the implementation in on-chip tunable quantum devices.

Optical Aggregation of Gold Nanoparticles for SERS Detection of Proteins and Toxins in Liquid Environment: Towards Ultrasensitive and Selective Detection

Optical forces are used to aggregate plasmonic nanoparticles and create SERS-active hot spots in liquid. When biomolecules are added to the nanoparticles, high sensitivity SERS detection can be accomplished. Here, we pursue studies on Bovine Serum Albumin (BSA) detection, investigating the BSA-nanorod aggregations in a range from 100 µM to 50 nM by combining light scattering, plasmon resonance and SERS, and correlating the SERS signal with the concentration. Experimental data are fitted with a simple model describing the optical aggregation process. We show that BSA-nanorod complexes can be optically printed on non-functionalized glass surfaces, designing custom patterns stable with time. Furthermore, we demonstrate that this methodology can be used to detect catalase and hemoglobin, two Raman resonant biomolecules, at concentrations of 10 nM and 1 pM, respectively, i.e., well beyond the limit of detection of BSA. Finally, we show that nanorods functionalized with specific aptamers can be used to capture and detect Ochratoxin A, a fungal toxin found in food commodities and wine. This experiment represents the first step towards the addition of molecular specificity to this novel biosensor strategy.

Differential Wavevector Distribution of Surface-Enhanced Raman Scattering and Fluorescence in a Film-Coupled Plasmonic Nanowire Cavity

We report on the experimental observation of differential wavevector distribution of surface-enhanced Raman scattering (SERS) and fluorescence from dye molecules confined to a gap between plasmonic silver nanowire and a thin, gold mirror. The fluorescence was mainly confined to higher values of in-plane wavevectors, whereas SERS signal was uniformly distributed along all the wavevectors. The optical energy-momentum spectra from the distal end of the nanowire revealed strong polarization dependence of this differentiation. All these observations were corroborated by full-wave three-dimensional numerical simulations, which further revealed an interesting connection between out-coupled wavevectors and parameters such as hybridized modes in the gap-plasmon cavity, and orientation and location of molecular dipoles in the geometry. Our results reveal a new prospect of discriminating electronic and vibrational transitions in resonant dye molecules using a subwavelength gap plasmonic cavity in the continuous-wave excitation limit, and can be further harnessed to engineer molecular radiative relaxation processes in momentum space.

Digital Protocol for Chemical Analysis at Ultralow Concentrations by Surface-Enhanced Raman Scattering

Single molecule surface-enhanced Raman spectroscopy (SM-SERS) has the potential to revolutionize quantitative analysis at ultralow concentrations (less than 1 nM). However, there are no established protocols to generalize the application of this technique in analytical chemistry. Here, a protocol for quantification at ultralow concentrations using SM-SERS is proposed. The approach aims to take advantage of the stochastic nature of the single-molecule regime to achieved lower limits of quantification (LOQ). Two emerging contaminants commonly found in aquatic environments, enrofloxacin (ENRO) and ciprofloxacin (CIPRO), were chosen as nonresonant molecular probes. The methodology involves a multivariate resolution curve fitting known as non-negative matrix factorization with alternating least-squares algorithm (NMF-ALS) to solve spectral overlaps. The key element of the quantification is to realize that, under SM-SERS conditions, the Raman intensity generated by a molecule adsorbed on a "hotspot" can be digitalized. Therefore, the number of SERS event counts (rather than SERS intensities) was shown to be proportional to the solution concentration. This allowed the determination of both ENRO and CIPRO with high accuracy and precision even at ultralow concentrations regime. The LOQ for both ENRO and CIPRO were achieved at 2.8 pM. The digital SERS protocol, suggested here, is a roadmap for the implementation of SM-SERS as a routine tool for quantification at ultralow concentrations.

Plasmonic tunnel junctions for single-molecule redox chemistry

Nanoparticles attached just above a flat metallic surface can trap optical fields in the nanoscale gap. This enables local spectroscopy of a few molecules within each coupled plasmonic hotspot, with near thousand-fold enhancement of the incident fields. As a result of non-radiative relaxation pathways, the plasmons in such sub-nanometre cavities generate hot charge carriers, which can catalyse chemical reactions or induce redox processes in molecules located within the plasmonic hotspots. Here, surface-enhanced Raman spectroscopy allows us to track these hot-electron-induced chemical reduction processes in a series of different aromatic molecules. We demonstrate that by increasing the tunnelling barrier height and the dephasing strength, a transition from coherent to hopping electron transport occurs, enabling observation of redox processes in real time at the single-molecule level.

Dynamic plasmonic nano-traps for single molecule surface-enhanced Raman scattering

Intense electric fields at the nanoscale are essential for single molecule surface-enhanced Raman scattering (SERS) detection. Such fields can be achieved in plasmonic nano-gaps between nanoparticles and metal films through hybridization of surface plasmons. The nano-gaps could be formed and dynamically controlled by using plasmonic tweezers; however, the aggregation of particles in the plasmonic field degrades each particle's enhancement and spoils the nanosized-spatial resolution. Here, dual-plasmonic tweezers are proposed and demonstrated to accurately control the number of nano-gaps and enhancement by tailoring a crater-shaped potential well in the nano-trap system. As the electric field in the nano-gap is intense, SERS spectral signatures of a single molecular level are probed simultaneously. These advantages point towards the implementation of enhanced Raman spectra, and broad applications in optical molecular detection.

Optical pulling and pushing forces exerted on silicon nanospheres with strong coherent interaction between electric and magnetic resonances

We investigated theoretically and numerically the optical pulling and pushing forces acting on silicon (Si) nanospheres (NSs) with strong coherent interaction between electric and magnetic resonances. We examined the optical pulling and pushing forces exerted on Si NSs by two interfering waves and revealed the underlying physical mechanism from the viewpoint of electric- and magnetic-dipole manipulation. As compared with a polystyrene (PS) NS, it was found that the optical pulling force for a Si NS with the same size is enlarged by nearly two orders of magnitude. In addition to the optical pulling force appearing at the long-wavelength side of the magnetic dipole resonance, very large optical pushing force is observed at the magnetic quadrupole resonance. The correlation between the optical pulling/pushing force and the directional scattering characterized by the ratio of the forward to backward scattering was revealed. More interestingly, it was found that the high-order electric and magnetic resonances in large Si NSs play an important role in producing optical pulling force which can be generated by not only s-polarized wave but also p-polarized one. Our finding indicates that the strong coherent interaction between the electric and magnetic resonances existing in nanoparticles with large refractive indices can be exploited to manipulate the optical force acting on them and the correlation between the optical force and the directional scattering can be used as guidance. The engineering and manipulation of optical forces will find potential applications in the trapping, transport and sorting of nanoparticles.

Exciton Emission Intensity Modulation of Monolayer MoS2 via Au Plasmon Coupling

Modulation of photoluminescence of atomically thin transition metal dichalcogenide two-dimensional materials is critical for their integration in optoelectronic and photonic device applications. By coupling with different plasmonic array geometries, we have shown that the photoluminescence intensity can be enhanced and quenched in comparison with pristine monolayer MoS2. The enhanced exciton emission intensity can be further tuned by varying the angle of polarized incident excitation. Through controlled variation of the structural parameters of the plasmonic array in our experiment, we demonstrate modulation of the photoluminescence intensity from nearly fourfold quenching to approximately threefold enhancement. Our data indicates that the plasmonic resonance couples to optical fields at both, excitation and emission bands, and increases the spontaneous emission rate in a double spacing plasmonic array structure as compared with an equal spacing array structure. Furthermore our experimental results are supported by numerical as well as full electromagnetic wave simulations. This study can facilitate the incorporation of plasmon-enhanced transition metal dichalcogenide structures in photodetector, sensor and light emitter applications.

Smart supramolecular sensing with cucurbit[n]urils: probing hydrogen bonding with SERS

Rigid gap nano-aggregates of Au nanoparticles formed using cucurbit[n]uril (CB[n]) molecules are used to investigate the competitive binding of ethanol and methanol in an aqueous environment. We show it is possible to detect as little as 0.1% methanol in water and a ten times higher affinity to methanol over ethanol, making this a useful technology for quality control in alcohol production. We demonstrate strong interaction effects in the SERS peaks, which we demonstrate are likely from the hydrogen bonding of water complexes in the vicinity of the CB[n]s.

Nanoporous Gold Disks Functionalized with Stabilized G-Quadruplex Moieties for Sensing Small Molecules

We report label-free small molecule sensing on nanoporous gold disks functionalized with stabilized Guanine-quadruplex (G4) moieties using surface-enhanced Raman spectroscopy (SERS). By utilizing the unique G4 topological structure, target molecules can be selectively captured onto nanoporous gold (NPG) disk surfaces via π-π stacking and electrostatic attractions. Together with high-density plasmonic "hot spots" of NPG disks, the captured molecules produce a remarkable SERS signal. Our strategy represents the first example of the detection of foreign molecules conjugated to nondouble helical DNA nanostructures using SERS while providing a new technique for studying the formation and evolution of G4 moieties. The molecular specificity of G4 is known to be controlled by its unit sequence. Without losing generality, we have selected d(GGT)₇GG sequence for the sensing of malachite green (MG), a known carcinogen frequently abused illegally in aquaculture. The newly developed technique achieved a lowest detectable concentration at an impressive 50 pM, two orders of magnitude lower than the European Union (EU) regulatory requirement, with high specificity against potential interferents. To demonstrate the translational potential of this technology, we achieved a lowest detectable concentration of 5.0 nM, meeting the EU regulatory requirement, using a portable probe based detection system.

Light-Directed Reversible Assembly of Plasmonic Nanoparticles Using Plasmon-Enhanced Thermophoresis

Reversible assembly of plasmonic nanoparticles can be used to modulate their structural, electrical, and optical properties. Common and versatile tools in nanoparticle manipulation and assembly are optical tweezers, but these require tightly focused and high-power (10-100 mW/μm²) laser beams with precise optical alignment, which significantly hinders their applications. Here we present light-directed reversible assembly of plasmonic nanoparticles with a power intensity below 0.1 mW/μm². Our experiments and simulations reveal that such a low-power assembly is enabled by thermophoretic migration of nanoparticles due to the plasmon-enhanced photothermal effect and the associated enhanced local electric field over a plasmonic substrate. With software-controlled laser beams, we demonstrate parallel and dynamic manipulation of multiple nanoparticle assemblies. Interestingly, the assemblies formed over plasmonic substrates can be subsequently transported to nonplasmonic substrates. As an example application, we selected surface-enhanced Raman scattering spectroscopy, with tunable sensitivity. The advantages provided by plasmonic assembly of nanoparticles are the following: (1) low-power, reversible nanoparticle assembly, (2) applicability to nanoparticles with arbitrary morphology, and (3) use of simple optics. Our plasmon-enhanced thermophoretic technique will facilitate further development and application of dynamic nanoparticle assemblies, including biomolecular analyses in their native environment and smart drug delivery.

Plasmon-controlled excitonic emission from vertically-tapered organic nanowires

Organic molecular nanophotonics has emerged as an important avenue to harness molecular aggregation and crystallization on various functional platforms to obtain nano-optical devices. To this end, there is growing interest to combine organic molecular nanostructures with plasmonic surfaces and interfaces. Motivated by this, herein we introduce a unique geometry: vertically-tapered organic nanowires grown on a plasmonic thin film. A polarization-sensitive plasmon-polariton on a gold thin-film was harnessed to control the exciton-polariton propagation and subsequent photoluminescence from an organic nanowire made of diaminoanthraquinone (DAAQ) molecules. We show that the exciton-polariton emission from individual DAAQ nanowires can be modulated up to a factor of 6 by varying the excitation polarization state of surface plasmons. Our observations were corroborated with full-wave three-dimensional finite-difference time-domain calculations performed on vertically-tapered nanowire geometry. Our work introduces a new optical platform to study coupling between propagating plasmons and propagating excitons, and may have implications in emerging fields such as hybrid-polariton based light emitting devices and vertical-cavity nano-optomechanics.