Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications

Copper-based electro-catalytic nitrate reduction to ammonia from water: Mechanism, preparation, and research directions

Global water bodies are increasingly imperiled by nitrate pollution, primarily originating from industrial waste, agricultural runoffs, and urban sewage. This escalating environmental crisis challenges traditional water treatment paradigms and necessitates innovative solutions. Electro-catalysis, especially utilizing copper-based catalysts, known for their efficiency, cost-effectiveness, and eco-friendliness, offer a promising avenue for the electro-catalytic reduction of nitrate to ammonia. In this review, we systematically consolidate current research on diverse copper-based catalysts, including pure Cu, Cu alloys, oxides, single-atom entities, and composites. Furthermore, we assess their catalytic performance, operational mechanisms, and future research directions to find effective, long-term solutions to water purification and ammonia synthesis. Electro-catalysis technology shows the potential in mitigating nitrate pollution and has strategic importance in sustainable environmental management. As to the application, challenges regarding complexity of the real water, the scale-up of the commerical catalysts, and the efficient collection of produced NH3 are still exist. Following reseraches of catalyst specially on long term stability and in situ mechanisms are proposed.

Synergistic Enhancement of Water-Splitting Performance Using MOF-Derived Ceria-Modified g-C3N4 Nanocomposites: Synthesis, Performance Evaluation, and Stability Prediction with Machine Learning

Diminishing the charge recombination rate by improving the photoelectrochemical (PEC) performance of graphitic carbon nitride (g-C3N4) is essential for better water oxidation. In this concern, this research explores the competent approach to enhance the PEC performance of g-C3N4 nanosheets (NSs), creating their nanocomposites (NCs) with metal-organic framework (MOF)-derived porous CeO2 nanobars (NBs) along with ZnO nanorods (NRs) and TiO2 nanoparticles (NPs). The synthesis involved preparing CeO2 NBs and g-C3N4 NSs through the calcination of respective precursors, while the sol-gel method is employed for ZnO NRs and TiO2 NPs. Following the subsequent analysis of the physicochemical properties of the materials, the binder-free brush-coating method is deployed to fabricate NC-based photoanodes, followed by an evaluation of the PEC performance through various electrochemical techniques. Remarkably, the binary g-C3N4/CeO2 NCs with 20 wt % CeO2 NBs (gC20 NCs) exhibited a significantly enhanced current density of 0.460 mA/cm2 at 1.23 V vs reversible hydrogen electrode, which is 2.3 times greater than that of bare g-C3N4 NSs (0.195 mA/cm2). Further improvements are observed with ternary gC20/TiO2 (gCT50) and gC20/ZnO (gCZ50) NCs, achieving current densities of 1.810 and 1.440 mA/cm2, respectively. These enhanced current densities are attributed to increased donor densities, reduced charge transfer resistances, and efficient charge transport within the NCs. In addition, higher surface areas with beneficial instinctive defects are perceived for gCT50 and gCZ50 NCs, as revealed by Brunauer-Emmett-Teller and electron spin resonance analysis. Finally, the stability of gCZ50 and gCT50 NC-based photoanodes is predicted and forecasted with the help of the recurrent neural network-based long short-term memory technique. Overall, this study demonstrates the efficacy of organic-inorganic hybrids for efficient photoanodes, facilitating advancements in water-splitting studies.

Impact of Tamm plasmon structures on fluorescence and optical nonlinearity of graphene quantum dots

Graphene Quantum Dots (GQDs) are crucial in biomedicine for sensitive biosensing and high-resolution bioimaging and in photonics for their nonlinear optical properties. Integrating GQDs with photonic structures enhances optical properties by optimizing light-matter interactions and enabling precise control over their emission wavelengths. In this work, we explore a facile synthesis method for GQDs by pulsed laser irradiation in chlorobenzene and highlight the transformative potential of Tamm Plasmon Cavity (TPC) structures for tuning and amplifying the photoluminescence and nonlinear optical properties of GQDs. The characterization of GQDs revealed their exceptional properties, including efficient optical limiting and stable photoluminescence. The study demonstrated that the TPC structure significantly amplifies nonlinear optical effects due to the high light-matter interaction, indicating the potential for advanced optical systems, including optical limiters and nonlinear optical devices. Furthermore, introducing GQDs into the TPC structure leads to a significant enhancement and tuning of fluorescence emission. The Purcell effect, in combination with the confined electromagnetic fields within the TPC, increases the spontaneous emission rate of GQDs and subsequently enhances the fluorescence intensity. This enhanced and tunable fluorescence has exciting implications for high-sensitivity applications such as biosensing and single-molecule detection.

Laser synthesis of nanoparticles in organic solvents - products, reactions, and perspectives

Laser synthesis and processing of colloids (LSPC) is an established method for producing functional and durable nanomaterials and catalysts in virtually any liquid of choice. While the redox reactions during laser synthesis in water are fairly well understood, the corresponding reactions in organic liquids remain elusive, particularly because of the much greater complexity of carbon chemistry. To this end, this article first reviews the knowledge base of chemical reactions during LSPC and then deduces identifiable reaction pathways and mechanisms. This review also includes findings that are specific to the LSPC method variants laser ablation (LAL), fragmentation (LFL), melting (LML), and reduction (LRL) in organic liquids. A particular focus will be set on permanent gases, liquid hydrocarbons, and solid, carbonaceous species generated, including the formation of doped, compounded, and encapsulated nanoparticles. It will be shown how the choice of solvent, synthesis method, and laser parameters influence the nanostructure formation as well as the amount and chain length of the generated polyyne by-products. Finally, theoretical approaches to address the mechanisms of organic liquid decomposition and carbon shell formation are highlighted and discussed regarding current challenges and future perspectives of LSPC using organic liquids instead of water.

Laser Irradiation Synthesis of AuPd Alloy with Decreased Alloying Degree for Efficient Ethanol Oxidation Reaction

The preparation of electrocatalysts with high performance for the ethanol oxidation reaction is vital for the large-scale commercialization of direct ethanol fuel cells. Here, we successfully synthesized a high-performance electrocatalyst of a AuPd alloy with a decreased alloying degree via pulsed laser irradiation in liquids. As indicated by the experimental results, the photochemical effect-induced surficial deposition of Pd atoms, combined with the photothermal effect-induced interdiffusion of Au and Pd atoms, resulted in the formation of AuPd alloys with a decreased alloying degree. Structural characterization reveals that L-AuPd exhibits a lower degree of alloying compared to C-AuPd prepared via the conventional co-reduction method. This distinct structure endows L-AuPd with outstanding catalytic activity and stability in EOR, achieving mass and specific activities as high as 16.01 A mgPd-1 and 20.69 mA cm-2, 9.1 and 5.2 times than that of the commercial Pd/C respectively. Furthermore, L-AuPd retains 90.1% of its initial mass activity after 300 cycles. This work offers guidance for laser-assisted fabrication of efficient Pd-based catalysts in EOR.

Advances in Plasma and Laser Engineering

Materials science, especially in the context of nanotechnology, plays a key role in today's world, contributing to the development of advanced materials with unique properties [...].

Alignment of fibrous J-aggregates and the resulting macroscopic optical anisotropy observed in static solution

J-aggregates, which are supramolecular assemblies that exhibit unique optical properties owing to their excitonic interactions, have potential applications in artificial light-harvesting systems and fluorescence biosensing. Although J-aggregates are formed in solution, in situ observations of their structures and behaviors in solution remain scarce. In this study, we investigated the J-aggregates of 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate [DiIC18(3)] in methanol/water (M/W) binary solvents using fluorescence imaging as well as polarized absorption and fluorescence measurements to explore the relationship between their structure and macroscopic optical properties under static conditions. Fluorescence images revealed that the DiIC18(3) J-aggregates have fibrous structures in the M/W = 44/56 (v/v) binary solvent. We measured the polarization-angle dependence of the fluorescence intensity of the fibrous J-aggregates to determine the direction of their transition dipole moment. Furthermore, the J-band absorbance was dependent on the polarization angle of the linearly polarized incident light, even in the absence of an external force such as that generated by a flow or stirring, indicating that the J-aggregates "spontaneously" aligned in solution. We also monitored the time evolution of the degree of alignment of the fibrous J-aggregates, which revealed that the formation and elongation of the fibers induced their alignment, resulting in the observed macroscopic optical anisotropy in solution.

Design Strategies towards Advanced Hydrogen Evolution Reaction Electrocatalysts at Large Current Densities

Hydrogen (H2), produced by water electrolysis with the electricity from renewable sources, is an ideal energy carrier for achieving a carbon-neutral and sustainable society. Hydrogen evolution reaction (HER) is the cathodic half-reaction of water electrolysis, which requires active and robust electrocatalysts to reduce the energy consumption for H2 generation. Despite numerous electrocatalysts have been reported by the academia for HER, most of them were only tested under relatively small current densities for a short period, which cannot meet the requirements for industrial water electrolysis. To bridge the gap between academia and industry, it is crucial to develop highly active HER electrocatalysts which can operate at large current densities for a long time. In this review, the mechanisms of HER in acidic and alkaline electrolytes are firstly introduced. Then, design strategies towards high-performance large-current-density HER electrocatalysts from five aspects including number of active sites, intrinsic activity of each site, charge transfer, mass transfer, and stability are discussed via featured examples. Finally, our own insights about the challenges and future opportunities in this emerging field are presented.

Bimetallic sulfide/N-doped carbon composite derived from Prussian blue analogues/cellulose nanofibers film toward enhanced oxygen evolution reaction

Exploiting effective, stable, and cost-efficient electrocatalysts for the water oxidation reaction is highly desirable for renewable energy conversion techniques. Constructional design and compositional manipulation are widely used approaches to efficaciously boost the electrocatalytic performance. Herein, we designed a NiFe-bimetallic sulfide/N-doped carbon composite via a two-step thermal treatment of Prussian blue analogues/cellulose nanofibers (PBA/CNFs) film. The NiFe-bimetallic sulfide/N-doped carbon composite displayed enhanced OER performance in an alkaline environment, with an overpotential of 282 mV at 10 mA cm-2, a Tafel slope of 59.71 mV dec-1, and good stability, making the composite a candidate electrocatalyst for OER-related energy equipment. The introduction of CNFs in the precursor prevented the aggregation of PBA nanoparticles (NPs), exposed more active sites, and the resulting carbon substrate enhanced the electroconductivity of the composite. Moreover, the synergistic effect of Ni and Fe in the bimetallic sulfide could modulate the configuration of electrons, enrich the catalytically active sites, and augment the electric conductivity, thus ameliorating the OER performance. This study broadens the application of MOF-CNF composites to construct hierarchical structures of metal compounds and provides some thoughts for the development of cost-effective precious-metal-free catalysts for electrocatalysis.

Laser-Synthesized Ru-Anchored Few-Layer Black Phosphorus for Superior Hydrogen Evolution: Role of Acoustic Levitation

Electrochemical water splitting, driven by processed catalysts, is the most reasonable method for hydrogen production. This study demonstrates an activation phenomenon with ruthenium (Ru) nanoclusters on few-layered black phosphorus (BP), greatly enhancing the electrocatalytic hydrogen evolution reaction (HER). Efficient BP exfoliation was achieved using acoustic levitators and pulsed laser irradiation in liquids (PLIL), yielding charge-transfer Ru-nanoclusters on modulated surfaces. Various PLIL parameters were examined for the optimal BP sheet size. After ruthenization, Ru's d-band center facilitated hydrogen adsorption via Ru-H bonding. Synergy between BP's charge-carrier properties and Ru's active sites boosted HER kinetics with an ultralow overpotential of 84 mV at 10 mA/cm2 in KOH. Additionally, the RuO2 || RuBP-2 electrolyzer demonstrated remarkable overall water splitting performance at ∼1.60 V at 10 mA/cm2. These results highlight the pivotal role of metal nanoclusters on exfoliated BP surfaces and offer a refined strategy for high-density electrocatalysts in energy conversion.

Laser-Synthesized Co-Doped CuO Electrocatalyst: Unveiling Boosted Methanol Oxidation Kinetics for Enhanced Hydrogen Production Efficiency by In Situ/Operando Raman and Theoretical Analyses

The present study details the strategic development of Co-doped CuO nanostructures via sophisticated and expedited pulsed laser ablation in liquids (PLAL) technique. Subsequently, these structures are employed as potent electrocatalysts for the anodic methanol oxidation reaction (MOR), offering an alternative to the sluggish oxygen evolution reaction (OER). Electrochemical assessments indicate that the Co-CuO catalyst exhibits exceptional MOR activity, requiring a reduced potential of 1.42 V at 10 mA cm-2 compared to that of pure CuO catalyst (1.57 V at 10 mA cm-2 ). Impressively, the Co-CuO catalyst achieved a nearly 180 mV potential reduction in MOR compared to its OER performance (1.60 V at 10 mA cm-2 ). Furthermore, when pairing Co-CuO(+)ǀǀPt/C(-) in methanol electrolysis, the cell voltage required is only 1.51 V at 10 mA cm-2 , maintaining remarkable stability over 12 h. This represents a substantial voltage reduction of ≈160 mV relative to conventional water electrolysis (1.67 V at 10 mA cm-2 ). Additionally, both in situ/operando Raman spectroscopy studies and theoretical calculations have confirmed that Co-doping plays a crucial role in enhancing the activity of the Co-CuO catalyst. This research introduces a novel synthetic approach for fabricating high-efficiency electrocatalysts for large-scale hydrogen production while co-synthesizing value-added formic acid.

Unveiling Fundamentals of Multi-Beam Pulsed Laser Ablation in Liquids toward Scaling up Nanoparticle Production

Pulsed laser ablation in liquids (PLAL) is a versatile technique to produce high-purity colloidal nanoparticles. Despite considerable recent progress in increasing the productivity of the technique, there is still significant demand for a practical, cost-effective method for upscaling PLAL synthesis. Here we employ and unveil the fundamentals of multi-beam (MB) PLAL. The MB-PLAL upscaling approach can bypass the cavitation bubble, the main limiting factor of PLAL efficiency, by splitting the laser beam into several beams using static diffractive optical elements (DOEs). A multimetallic high-entropy alloy CrFeCoNiMn was used as a model material and the productivity of its nanoparticles in the MB-PLAL setup was investigated and compared with that in the standard single-beam PLAL. We demonstrate that the proposed multi-beam method helps to bypass the cavitation bubble both temporally (lower pulse repetition rates can be used while keeping the optimum processing fluence) and spatially (lower beam scanning speeds are needed) and thus dramatically increases the nanoparticle yield. Time-resolved imaging of the cavitation bubble was performed to correlate the observed production efficiencies with the bubble bypassing. The results suggest that nanoparticle PLAL productivity at the level of g/h can be achieved by the proposed multi-beam strategy using compact kW-class lasers and simple inexpensive scanning systems.

Energy Application of Graphene Based Membrane: Hydrogen Separation

Hydrogen gas (H2 ) is a viable energy carrier that has the potential to replace the traditional fossil fuels and contribute to achieving zero net emissions, making it an attractive option for a hydrogen-based society. However, current H2 purification technologies are often limited by high energy consumption, and as a result, there is a growing demand for alternative techniques that offer higher H2 purity and energy efficiency. Membrane separation has emerged as a promising approach for obtaining high-purity H2 gas with low energy consumption. Nevertheless, despite years of development, commercial polymeric membranes have limited performance, prompting researchers to explore alternative materials. In this context, carbon-based membranes, specifically graphene-based nanomaterials, have gained significant attention as potential membrane materials due to their unique properties. In this review, we provide a comprehensive overview of carbon-based membranes for H2 gas separation, fabrication of the membrane, and its characterization, including their advantages and limitations. We also explore the current technological challenges and suggest insights into future research directions, highlighting potential ways to improve graphene-based membranes performance for H2 separations.

Polypyrrole-Tungsten Oxide Nanocomposite Fabrication through Laser-Based Techniques for an Ammonia Sensor: Achieving Room Temperature Operation

A highly sensitive ammonia-gas sensor based on a tungsten trioxide and polypyrrole (WO3/PPy) nanocomposite synthesized using pulsed-laser deposition (PLD) and matrix-assisted pulsed-laser evaporation (MAPLE) is presented in this study. The WO3/PPy nanocomposite is prepared through a layer-by-layer alternate deposition of the PPy thin layer on the WO3 mesoporous layer. Extensive characterization using X-ray diffraction, FTIR and Raman spectroscopy, scanning electron microscopy, atomic force microscopy, and water contact angle are carried out on the as-prepared layers. The gas-sensing properties of the WO3/PPy nanocomposite layers are systematically investigated upon exposure to ammonia gas. The results demonstrate that the WO3/PPy nanocomposite sensor exhibits a lower detection limit, higher response, faster response/recovery time, and exceptional repeatability compared to the pure PPy and WO3 counterparts. The significant improvement in gas-sensing properties observed in the WO3/PPy nanocomposite layer can be attributed to the distinctive interactions occurring at the p-n heterojunction established between the n-type WO3 and p-type PPy. Additionally, the enhanced surface area of the WO3/PPy nanocomposite, achieved through the PLD and MAPLE synthesis techniques, contributes to its exceptional gas-sensing performance.

Plasmonic porous micro- and nano-materials based on Au/Ag nanostructures developed for photothermal cancer therapy: challenges in clinicalization

Photothermal therapy (PTT) has developed in recent decades as a relatively safe method for the treatment of cancers. Recently, various species of gold and silver (Au and Ag) nanostructures have been developed and investigated to achieve PTT due to their highly localized surface plasmon resonance (LSPR) effect. Concisely, the collective oscillation of electrons on the surface of Au and Ag nanostructures upon exposure to a specific wavelength (depending on their size and shape) and further plasmonic resonance leads to the heating of the surface of these particles. Hence, porous species can be equipped with tiny plasmonic ingredients that add plasmonic properties to therapeutic cargoes. In this case, a precise review of the recent achievements is very important to figure out to what extent plasmonic photothermal therapy (PPTT) by Au/Ag-based plasmonic porous nanomedicines successfully treated cancers with satisfactory biosafety. Herein, we classify the various species of LSPR-active micro- and nano-materials. Moreover, the routes for the preparation of Ag/Au-plasmonic porous cargoes and related bench assessments are carefully reviewed. Finally, as the main aim of this study, principal requirements for the clinicalization of Ag/Au-plasmonic porous cargoes and their further challenges are discussed, which are critical for specialists in this field.

Interfacial construction of SnS2/Zn0.2Cd0.8S nanopolyhedron heterojunctions for enhanced photocatalytic hydrogen evolution

ZnCdS, a metal chalcogenide solid solution, has attracted significant attention. However, two primary challenges hinder its widespread application in photocatalytic hydrogen evolution: the rapid recombination rate of photogenerated carriers and susceptibility to photo-oxidation in the aqueous environments. In this article, a facile hydrothermal route was employed for the first time to uniformly assemble SnS2 nanoparticles onto the surface of Zn0.2Cd0.8S (ZCS) nanopolyhedra. The intimate contact of two materials resulted in the formation of heterojunctions. By adjusting the content of SnS2, the hydrogen evolution reaction (HER) performance was optimized to reach up to 12170 μmol/gh, which is 1.9 times of the pristine ZCS. Notably, the photocatalyst demonstrated remarkable stability with an apparent quantum yield (AQY) of 15.5% at 420 nm. The enhanced photocatalytic performance can be attributed to the following factors: (i) The heterojunction composite, with larger surface area and more micropores, provides additional active sites and exhibits high photocatalytic activity; (ii) The internal electric field accelerates the separation of photogenerated carriers and reduces the recombination rate of electron-hole pairs; (iii) The photogenerated holes can be quickly transferred to the valence band of SnS2 and react with triethanolamine, thereby significantly reducing the photo-oxidation of ZCS. This work not only proposed a feasible route to improve the photocatalytic activity of ZCS, but also provided insights into the role of heterojunctions and the reaction mechanism.

Triggering "signal-on" photoelectrochemical responses by heterojunction transition for selective detection of copper(II) based on Pd/MoS2@g-C3N4 nanocomposites

Controlling the concentration of copper(II) in aquatic systems is of importance for human health. Numerous traditional technologies to detect Cu2+ may encounter with limitations, such as high signal background and complicated operation. Herein, a highly selective photoelectrochemical (PEC) sensor is proposed for the "signal-on" detection of Cu2+ employing g-C3N4 nanosheets with MoS2 and Pd quantum dots deposited (Pd/MoS2@g-C3N4). Pd/MoS2@g-C3N4 could present the enhanced photocurrents of specific responses to Cu2+ under light irradiation. MoS2 quantum dots on the sensor are agglomerated into MoS2 bulk during sensing Cu2+, forming an efficient Z-scheme heterojunction. The heterojunction transition induced photoelectrons transferring from the bulk MoS2 to g-C3N4, resulting in "signal-on" PEC responses. Such Z-scheme heterojunction has conquered the traditional heterojunction towards "signal-on" mechanism, that was further verified by band structure measurements and DMPO spin trapping ESR analysis. Photocurrent intensities increased gradually with the addition of incremental Cu2+ concentrations, achieving a detection limit of 0.21 μM and a broad linear interval range from 1 μM to 1 mM with high selectivity and stability. This work may open a new door towards the in situ construction of g-C3N4-based Z-scheme heterojunctions for the signal-on PEC sensing platform, providing wide applications in environmental monitoring and food safety.

Highly Efficient and Reusable PI/TiO2 Organic-Inorganic Microfibers for Sustainable Photocatalytic Degradation of Multiple Organic Pollutants under Simulated Sunlight

Herein, a series of polyimide (PI)/titanium dioxide (TiO2) organic-inorganic flexible composite microfibers with high photocatalytic performance and good reusability were prepared by combining electrospinning technology and a hydrothermal method. Under simulated sunlight, the photocatalytic characteristics of the as-prepared PI nanofibers, TiO2 nanorods, and PI/TiO2 microfibers were evaluated with photocatalytic degradation of Rhodamine B (RhB) solution. Among the tested samples, PI/TiO2-3 mL hydrochloric acid-160 °C-14 h (PI/TiO-3-160-14) (100%) exhibited a superior photocatalytic degradation rate compared to pure PI (84.0%) and TiO2 (62.2%). The enhancement of the photocatalytic performance was attributed to the Z-scheme heterojunction mechanism. When the interface was irradiated by simulated sunlight, the band edge bending, built-in electric field, and Coulomb interaction synergistically facilitated the separation and transport of electron-hole pairs in the heterojunction. This enhanced the oxidation and reduction abilities of the valence and conduction bands of PI/TiO2. These results were adequately verified by X-ray photoelectron spectroscopy (XPS) analyses and radical trapping experiments. Additionally, PI/TiO2 microfibers also demonstrated excellent photocatalytic activity toward methylene blue (MB, 81.4%), methyl orange (MO, 95.9%), and malachite green (KG, 98.9%), underscoring the versatile applicability of PI/TiO2. Further supplementary investigations illustrated that PI/TiO2 microfibers also possess excellent photostability during our extensive recycling photocatalytic experiments.

An Overview of the Potential of Food-Based Carbon Dots for Biomedical Applications

Food-based carbon dots (CDs) hold significant importance across various fields, ranging from biomedical applications to environmental and food industries. These CDs offer unique advantages over traditional carbon nanomaterials, including affordability, biodegradability, ease of operation, and multiple bioactivities. This work aims to provide a comprehensive overview of recent developments in food-based CDs, focusing on their characteristics, properties, therapeutic applications in biomedicine, and safety assessment methods. The review highlights the potential of food-based CDs in biomedical applications, including antibacterial, antifungal, antivirus, anticancer, and anti-immune hyperactivity. Furthermore, current strategies employed for evaluating the safety of food-based CDs have also been reported. In conclusion, this review offers valuable insights into their potential across diverse sectors and underscores the significance of safety assessment measures to facilitate their continued advancement and application.

Green synthesis, characterization, antibacterial, and antifungal activity of copper oxide nanoparticles derived from Morinda citrifolia leaf extract

The green methodologies of nanoparticles with plant extracts have received an increase of interest. Copper oxide nanoparticles (CuO NPs) have been utilized in a many of applications in the last few decades. The current study presents the synthesis of CuO NPs with aqueous extract of Morinda citrifolia as a stabilizing agent. The leaf extract of Morinda citrifolia was mixed with a solution of copper sulphate (CuSO4·5H2O) and sodium hydroxide as a catalyst. UV-visible spectroscopy, FTIR, XRD, SEM, TEM, and EDAX analysis were performed to study the synthesized CuO NPs. Particle size distribution of the synthesized CuO NPs have been measured with dynamic light scattering. The CuO NPs synthesized were highly stable, sphere-like, and have size of particles from 20 to 50 nm. Furthermore, as-formed CuO NPs shown strong antibacterial activity against the Gram-positive bacteria (Bacillus subtilis, and Staphylococcus aureus), and Gram-negative bacteria (Escherichia coli). CuO NPs revealed a similar trend was analysed for antifungal activity. The zone of inhibition for the fungi evaluated for Aspergillus flavus (13.0 ± 1.1), Aspergillus niger (14.3 ± 0.7), and Penicillium frequentans (16.8 ± 1.4). According to the results of this investigation, green synthesized CuO NPs with Morinda citrifolia leaf extract may be used in biomedicine as a replacement agent for biological applications.

In-situ monitoring of thiazine molecular aggregation in various solvents via a free-standing acoustic levitator

In this work, we explored the in-situ reaction modeling of the molecular self-aggregation of methylene blue (MB), which is a cationic thiazine dye, in different solvents via a container-less acoustic levitator by floating of a single droplet. Our in-situ spectroscopic study revealed that the dimer essentially has a sandwich structural geometry with a deviation from parallel stacking and horizontal arrangements in the molecular planes. The real time conversion of the monomer in MB into a dimer and their dynamics in water and ethanol media were monitored using a free-standing acoustic levitator droplet system. The absorption spectra revealed changes in the two resolved peaks (monomer and dimer) and orderliness when water and ethanol were used as the media. Interestingly, the enhancement in the dimerization of MB could be attributed to droplet evaporation, which is difficult to observe in typical reactor containers. Moreover, acidic protonation resulted in a change in the aggregation orientation direction of the MB molecules, forming an unusual J-aggregation. Theoretical DFT calculations revealed that MB underwent typical H-aggregation and J-aggregation in the different solvent environments, and their orientations well matched the spectroscopic data.

Single-atom nanozymes: classification, regulation strategy, and safety concerns

Nanozymes, nanomaterials possessing enzymatic activity, have been studied extensively by researchers. However, their complex composition, low density of active sites, and inadequate substrate selectivity have hindered the maturation and widespread acceptance of nanozymes. Single-atom nanozymes (SAzymes) with atomically dispersed active sites are leading the field of catalysis due to their exceptional performance. The maximum utilization rate of atoms, low cost, well-defined coordination structure, and active sites are the most prominent advantages of SAzymes that researchers favor. This review systematically categorizes SAzymes based on their support type and describes their specific applications. Additionally, we discuss regulation strategies for SAzyme activity and provide a comprehensive summary of biosafety challenges associated with these enzymes.

Carbon Dots-Types, Obtaining and Application in Biotechnology and Food Technology

Materials with a "nano" structure are increasingly used in medicine and biotechnology as drug delivery systems, bioimaging agents or biosensors in the monitoring of toxic substances, heavy metals and environmental variations. Furthermore, in the food industry, they have found applications as detectors of food adulteration, microbial contamination and even in packaging for monitoring product freshness. Carbon dots (CDs) as materials with broad as well as unprecedented possibilities could revolutionize the economy, if only their synthesis was based on low-cost natural sources. So far, a number of studies point to the positive possibilities of obtaining CDs from natural sources. This review describes the types of carbon dots and the most important methods of obtaining them. It also focuses on presenting the potential application of carbon dots in biotechnology and food technology.

Quantum dots derived from two-dimensional transition metal dichalcogenides: synthesis, optical properties and optoelectronic applications

Zero-dimensional transition metal dichalcogenides (TMD) quantum dots (QDs) have attracted a lot of attention due to their interesting fundamental properties and various applications. Compared to TMD monolayers, the QD counterpart exhibits larger values for direct transition energies, exciton binding energies, absorption coefficient, luminescence efficiency, and specific surface area. These characteristics make them useful in optoelectronic devices. In this review, recent exciting progress on synthesis, optical properties, and applications of TMD QDs is highlighted. The first part of this article begins with a brief description of the synthesis approaches, which focus on microwave-assistant heating and pulsed laser ablation methods. The second part introduces the fundamental optical properties of TMD QDs, including quantum confinement in optical absorption, excitation-wavelength-dependent photoluminescence, and many-body effects. These properties are highlighted. In the third part, we discuss lastest advancements in optoelectronic devices based on TMD QDs These devices include light-emitting diodes, solar cells, photodetectors, optical sensors, and light-controlled memory devices. Finally, a brief summary and outlook will be provided.

Controlling basal plane sulfur vacancy in water splitting MoSx/NiF electrocatalysts through electric-field-assisted pulsed laser ablation

Eco-friendly, efficient, and durable electrocatalysts from earth-abundant materials are crucial for water splitting through hydrogen and oxygen generation. However, available methods to fabricate electrocatalysts are either hazardous and time-consuming or require expensive equipment, hindering the large-scale, eco-friendly production of artificial fuels. Here, we present a rapid, single-step method for producing MoS_x/NiF electrocatalysts with controlled sulfur-vacancies via electric-field-assisted pulsed laser ablation (EF-PLA) in liquid and in-situ deposition on nickel foam, enabling efficient water splitting. Electric-field parameters efficiently control S-vacancy active sites in electrocatalysts. Higher electric fields yield a MoS_x/NiF electrocatalyst with a larger density of S-vacancy sites, suited for HER due to lower Gibbs free energy for H∗ adsorption, while lower electric fields produce an electrocatalyst with lower S-vacancy sites, better suited for OER, as shown by both experimental and theoretical results. The present work opens a horizon in designing high-efficiency catalysts, for a wide range of chemical reactions.

Environmentally Benign pSOFC for Emissions-Free Energy: Assessment of Nickel Network Resistance in Anodic Ni/BCY15 Nanocatalyst

Yttrium-doped barium cerate (BCY15) was used as ceramic matrix to obtain Ni/BCY15 anode cermet for application in proton-conducting solid oxide fuel cells (pSOFC). Ni/BCY15 cermets were prepared in two different types of medium, namely deionized water (W) and anhydrous ethylene glycol (EG) using wet chemical synthesis by hydrazine. An in-depth analysis of anodic nickel catalyst was made aiming to elucidate the effect of anode tablets' preparation by high temperature treatment on the resistance of metallic Ni in Ni/BCY15-W and Ni/BCY15-EG anode catalysts. On purpose reoxidation upon high-temperature treatment (1100 °C for 1 h) in air ambience was accomplished. Detailed characterization of reoxidized Ni/BCY15-W-1100 and Ni/BCY15-EG-1100 anode catalysts by means of surface and bulk analysis was performed. XPS, HRTEM, TPR, and impedance spectroscopy measurements experimentally confirmed the presence of residual metallic Ni in the anode catalyst prepared in ethylene glycol medium. These findings were evidence of strong metal Ni network resistance to oxidation in anodic Ni/BCY15-EG. Enhanced resistance of the metal Ni phase contributed to a new microstructure of the Ni/BCY15-EG-1100 anode cermet getting more stable to changes that cause degradation during operation.

Moving beyond Ti2C3Tx MXene to Pt-Decorated TiO2@TiC Core-Shell via Pulsed Laser in Reshaping Modification for Accelerating Hydrogen Evolution Kinetics

Phase engineering of nanocatalysts on specific facets is critical not only for enhancing catalytic activity but also for intensely understanding the impact of facet-based phase engineering on electrocatalytic reactions. In this study, we successfully reshaped a two-dimensional (2D) MXene (Ti₃C₂T_x) obtained by etching Ti₃AlC₂ MAX via a pulsed laser irradiation in liquid (PLIL) process. We produced a TiO₂@TiC core-shell structure in spheres with sizes of 200-350 nm, and then ∼2 nm ultrasmall Pt NPs were decorated on the surface of the TiO₂@TiC core-shell using the single-step PLIL method. These advances allow for a significant increase in electrocatalytic hydrogen evolution reaction (HER) activity under visible light illumination. The effect of optimal Pt loading on PLIL time was identified, and the resulting Pt/TiO₂@TiC/Pt-5 min sample demonstrated outstanding electrochemical and photoelectrochemical performance. The photoelectrochemical HER activity over Pt/TiO₂@TiC/Pt-5 min catalyst exhibits a low overpotential of 48 mV at 10 mA/cm² and an ultralow Tafel slope of 54.03 mV/dec with excellent stability of over 50 h, which is hydrogen production activity even superior to that of the commercial Pt/C catalysts (55 mV, 62.45 mV/dec). This investigation not only serves as a potential for laser-dependent phase engineering but also provides a reliable strategy for the rational design and fabrication of highly effective nanocatalysts.

Alkali functionalized carbon nitride with internal van der Waals heterostructures: Directional charge flow to enhance photocatalytic hydrogen production

Improving the charge separation and migration in graphitic carbon nitride (CN) is the critical issue to enhance its photocatalytic performance, but still remains very challenging. Herein, the alkali metals were introduced into the interlayer and intralayer of CN to tackle this challenge. The lithium sodium-modifying carbon nitride layer (LiNaCN2) and the adjacent CN layer formed a van der Waals heterostructures (VDWHs), while the potassium-intercalating served as interlayer charge transfer channels to induce the directional charge flow. Experiments and theoretical calculations indicated that such unique construction provided intrinsic driving force to obtain the electrons from LiNaCN2 to CN via directional potassium channels. In accordance with the theoretical prediction, a dramatically red-shift of the light absorption feature was achieved for interlayer potassium-intercalating and intralayer lithium sodium-modifying co-functionalized carbon nitride (LiNaCN-K-CN2) to show narrowed bandgap energy of 2.15 eV. This directional charge flow in CN resulted in the rapid transfer of charge carriers in both interlayer as well as intralayer of CN, which reduced the electronic localization as well as extended the π conjugative effect. Consequently, the LiNaCN-K-CN2 displayed stable and remarkable hydrogen production rate of about 2.46 mmol g^-1 h^-1 with apparent quantum yield (AQY) of about 13.68% at 435 nm, which was 22 folds higher than that of the pristine CN. This finding provides the feasible strategy to precisely tune the directions of charge transfer for high-performance CN-based photocatalysts.

Investigation of the Mechanical Properties and Microstructure of the Co40NiCrMo Alloy Used for STACERs and Prepared by the CSPB Process and the Winding and Stabilization Method

The Co40NiCrMo alloy, used for STACERs fabricated by the CSPB (compositing stretch and press bending) process (cold forming) and the winding and stabilization (winding and heat treatment) method, was investigated with regard to its tensile property, residual stress, and microstructure. The Co40NiCrMo STACER prepared by the winding and stabilization method was strengthened with lower ductility (tensile strength/elongation: 1562 MPa/5%) compared to that prepared by CSPB (tensile strength/elongation: 1469 MPa/20.4%). The residual stress of the STACER prepared by winding and stabilization (τ_xy = -137 MPa) showed consistency with that obtained through CSPB (τ_xy = -131 MPa). Combined with the driving force and pointing accuracy performances, the optimum heat treatment parameters for the winding and stabilization method were determined as 520 °C + 4 h. The HABs in the winding and stabilization STACER (98.3%, of which 69.1% were Σ3 boundaries) were much higher than those in the CSPB STACER (34.6%, of which 19.2% were Σ3 boundaries), while deformation twins and h.c.p ε-platelet networks were present in the CSPB STACER, and many more annealing twins appeared in the winding and stabilization STACER. It was concluded that the strengthening mechanism in the CSPB STACER is the combined action of deformation twins and h.c.p ε-platelet networks, while for the winding and stabilization STACER, annealing twins play the dominant role.

Physicochemical pre- and post-treatment of coking wastewater combined for energy recovery and reduced environmental risk

In this study, physicochemical pre- and post-treatment of highly polluting coking wastewater (CWW) for the removal of refractory compounds and recovery of high-energy substances/components was investigated. An economic optimization model targeting the development of a cost-effective and sustainable treatment technology was proposed. At the post-treatment stage, powdered activated carbon (PAC) was used to separate the refractory and toxic pollutants from the bio-treated CWW, with the adsorption capacity ranging from 50 to 120 mg chemical oxygen demand (COD) g^-1 PAC. Then, the spent PAC, together with a coagulant, was reused in the pre-treatment of highly concentrated raw CWW, which lifted the adsorption capacity to 800-1200 mg COD g^-1 PAC. Results showed that the adsorbent's high selectivity towards macromolecular and complicated pollutants could remove 25-65 % of COD in both CWW flows. Analysis of pollutants' molecular weight distribution and GC-MS indicated a good affinity between PAC and high-energy pollutants (phenolic compounds and alkanes), which could transfer 144,555 kJ m^-3 of energy from CWW to the adsorption-coagulation sludge. The economic optimization model suggested that the cost of the adsorbent was compensated by the net benefits of energy recovery and that profit was achieved when the PAC price was less than 5562 CNY t^-1. The proposed two-stage PAC/coagulant approach offers a way to sustainable water quality and sludge management, plus energy recycling, in CWW treatment. It may also be applied to the treatment of other industrial wastewaters.

Architecting the High-Entropy Oxides on 2D MXene Nanosheets by Rapid Microwave-Heating Strategy with Robust Photoelectrochemical Oxygen Evolution Performance

High-entropy oxides (HEO) have recently concerned interest as the most promising electrocatalytic materials for oxygen evolution reactions (OER). In this work, a new strategy to the synthesis of HEO nanostructures on Ti₃ C₂ T_x MXene via rapid microwave heating and subsequent calcination at a low temperature is reported. Furthermore, the influence of HEO loading on Ti₃ C₂ T_x MXene is investigated toward OER performance with and without visible-light illumination in an alkaline medium. The obtained HEO/Ti₃ C₂ T_x -0.5 hybrid exhibited an outstanding photoelectrochemical OER ability with a low overpotential of 331 mV at 10 mA cm^-2 and a small Tafel slope of 71 mV dec^-1 , which exceeded that of a commercial IrO₂ catalyst (340 mV at 10 mA cm^-2 ). In particular, the fabricated water electrolyzer with the HEO/Ti₃ C₂ T_x -0.5 hybrid as anode required a less potential of 1.62 V at 10 mA cm^-2 under visible-light illumination. Owing to the strong synergistic interaction between the HEO and Ti₃ C₂ T_x MXene, the HEO/Ti₃ C₂ T_x hybrid has a great electrochemical surface area, many metal active sites, high conductivity, and fast reaction kinetics, resulting in an excellent OER performance. This study offers an efficient strategy for synthesizing HEO-based materials with high OER performance to produce high-value hydrogen fuel.

Optimization of nickel catalyst loading in Ni/γAl2O3 for producing carbon nanotubes through natural gas decomposition

Carbon nanotubes can be produced at high quality through hydrocarbon catalytic decomposition. In addition, hydrogen can be produced as a valuable byproduct at a competitive price. In this article, the loading of the active phase in the decomposition catalyst is optimized using natural gas as a widely available hydrocarbon. Natural gas decomposition was investigated using different nickel loadings. Natural gas decomposition, as a widely available hydrocarbon, is investigated by manipulating nickel loading to optimize the loading of the active phase in the decomposition catalyst.

Optimizing the catalyst loading can achieve higher quality and yield of carbon nanotube. In addition, a higher carbon nanotube yield will maximize hydrogen production. Increasing the quality of produced carbon and the amount of hydrogen will improve the overall process economics. Nickel is a highly active catalyst for natural gas decomposition and has a higher carbon affinity compared to other metallic catalysts. Different nickel loadings were tested for natural gas decomposition. Optimization was used to calculate the optimum nickel loading based on the experimental results. The optimum nickel loading over alumina was 12.5%. The economic analysis of the process indicated that the optimum nickel loading is 30%.

The development of cobalt phosphide co-catalysts on BiVO4 photoanodes to improve H2O2 production

Photoanodic hydrogen peroxide (H₂O₂) production via water oxidation is limited by low yields and poor selectivity. Herein, four variations of cobalt phosphides, including pristine CoP and Co₂P crystals, and two mixed-phase cobalt phosphides (CoP/Co₂P) with different ratios, were applied as co-catalysts on the BiVO₄ (BVO) photoanode to improve H₂O₂ production. The optimal yield and selectivity were approximately 9.6 µmol‧h^-1‧cm^-2 and 25.2 % at a voltage bias of 1.7 V vs reversible hydrogen electrode (V_RHE) under sunlight illumination, respectively. This performance is approximately 1.8 times that of pristine BVO photoanode. The roles of the Co and P sites were investigated. In particular, the Co site promotes the breaking of one HO bond in water to form OH^• radicals, which is the rate-determining step in H₂O₂ production. The P site plays an important role in the desorption of H₂O₂ formed from the catalyst, which is responsible for the recovery of fresh catalytic sites. Among the four samples, Co₂P exhibited the best performance for H₂O₂ production because it had the highest rate of OH^• formation owing to its improved accumulation property. This study offers a rational design strategy for co-catalysts for photoanodic H₂O₂ production.

In situ studies on free-standing synthesis of nanocatalysts via acoustic levitation coupled with pulsed laser irradiation

Acoustic levitation is a distinctive and versatile tool for levitating and processing free-standing single droplets and particles. Liquid droplets suspended in an acoustic standing wave provide container-free environments for understanding chemical reactions by avoiding boundary effects and solid surfaces. We attempted to use this strategy for the production of well-dispersed uniform catalytic nanomaterials in an ultraclean confined area without the addition of external reducing agents or surfactants. In this study, we report on the synthesis of gold and silver nanoparticles (NPs) via acoustic levitation coupled with pulsed laser irradiation (PLI). In situ UV-Visible and Raman spectroscopic techniques were performed to monitor the formation and growth of gold and silver NPs. The PLI was used for the photoreduction of targeted metal ions present in the levitated droplets to generate metal NPs. Additionally, the cavitation effect and bubble movement accelerate the nucleation and decrease the size of NPs. The synthesized Au NPs with ∼ 5 nm size showed excellent catalytic behavior towards the conversion of 4-nitrophenol to 4-aminophenol. This study may open a new door for synthesizing various functional nanocatalysts and for achieving new chemical reactions in suspended droplets.

Transparent and high-performance electromagnetic interference shielding composite film based on single-crystal graphene/hexagonal boron nitride heterostructure

The multiple requirements of optical transmittance, high shielding effectiveness, and long-term stability bring considerable challenge to electromagnetic interference (EMI) shielding in the fields of visualization windows, transparent optoelectronic devices, and aerospace equipment. To this end, attempts were hereby made, and based on high-quality single crystal graphene (SCG)/hexagonal boron nitride (h-BN) heterostructure, transparent EMI shielding films with weak secondary reflection, nanoscale ultra-thin thickness and long-term stability were finally realized by a composite structure. In this novel structure, SCG was adopted as the absorption layer, while sliver nanowires (Ag NWs) film acted as the reflection layer. These two layers were placed on different sides of the quartz to form a cavity, which achieved the dual coupling effect, so that the electromagnetic wave was reflected multiple times to form more absorption loss. Among the absorption dominant shielding films, the composite structure in this work demonstrated stronger shielding effectiveness of 28.76 dB with a higher light transmittance of 80.6%. In addition, under the protection of the outermost h-BN layer, the decline range of the shielding performance of the shielding film was extensively reduced after 30 days of exposure to air and maintained long-term stability. Overall, this study provides an outstanding EMI shielding material with great potential for practical applications in electronic devices protection.

An empirical experimental investigation on the effect of an external electric field on the behaviour of laser-induced cavitation bubbles

This study is an attempt to empirically investigate the behaviour of laser-induced cavitation bubbles under the influence of an external electric field. As such two targets (copper and iridium) were subjected to a high-power Nd:YAG laser beam while being submerged in a liquid. Three different liquids were chosen for this purpose viz. acetone, ethanol, and distilled de-ionized water. The choice of the liquids was made with the underlying assumption that the conductivity of the liquids would play a significant role in responding to the applied external electric field and thus dictate the behaviour of the cavitation bubbles. A probe-beam method known as a beam deflection setup was employed for this experiment and the results were analyzed using the Rayleigh-Plesset model. The results revealed that the maximum radii of the cavitation bubbles increased in response to an increasing electric field. This effect was more pronounced in the presence of acetone medium and decreased successively while using ethanol and water media owing to their varying magnitudes of electrical conductivity. The bubble collapse speeds and their energies were also measured and similar trends were observed in both cases. The results from cavitation bubble dynamics were then applied to a Gilmore model and the sizes of the NPs synthesized using laser ablation with and without an external electric field were calculated using classical nucleation theory.

Cellulose-based bionanocomposites in energy storage applications-A review

The growing demand for energy and environmental issues are the main concern for the sustainable development of modern society. Replacing toxic and expensive materials with inexpensive and biodegradable biomaterials is the main challenge for researchers. Nanocomposites are of the utmost consideration for their application in energy storage devices because of their specific electrochemical properties. Cellulose-based bionanocomposites have added a new dimension to this field since these are developed from available renewable biomaterials. Studies on developing electrodes, separators, collectors, and electrolytes for the batteries have been conducted based on these composites rigorously. Electrodes and separators made of these composites for the supercapacitors have also been investigated. Researchers have used a wide range of micro- and nano-structural cellulose along with nanostructured inorganic materials to produce cellulose-based bionanocomposites for energy devices, i.e., supercapacitors and batteries. The presence of cellulosic materials enhances the loading capacity of active materials and uniform porous structure in the electrode matrix. Thus, it has shown improved electrochemical properties. Therefore, these can help to develop biodegradable, lightweight, malleable, and strong energy storage devices. In this review article, the manufacturing process, properties, applications, and possible opportunities of cellulose-based bionanocomposites in energy storage devices have been emphasized. Its challenges and opportunities have also been discussed.

Photocatalytic Aerobic Oxidation of Biomass-Derived 5-HMF to DFF over MIL-53(Fe)/g-C3N4 Composite

A MIL-53(Fe)/g-C₃N₄ heterogeneous composite was synthesized and applied in photocatalytic oxidation of 5-hydroxymethylfurfural (5-HMF) to 2,5-diformylfuran (DFF). The systematic investigation indicated that the introduction of MIL-53(Fe) into g-C₃N₄ increased the specific surface area, broadened the visible-light response region, and promoted the separation efficiency of the photo-generated electron-hole pairs. The 10% MIL-53(Fe)/g-C₃N₄ heterogeneous composite achieved the best photocatalytic oxidation activity with 74.5% of 5-HMF conversion under simulated sunlight, which was much higher than that of pristine g-C₃N₄ and MIL-53(Fe). The MIL-53(Fe)/g-C₃N₄ composite displayed good photocatalytic reusability and stability. Based on the characterization results and photocatalytic performance, a Z-scheme photocatalytic mechanism of the MIL-53(Fe)/g-C₃N₄ composite was suggested, and a possible reaction route was deduced.

Sustainable removal of nitrite waste to value-added ammonia on Cu@Cu2O core-shell nanostructures by pulsed laser technique

The biochemical reduction of nitrite (NO₂^-) ions to ammonia (NH₃) requires six electrons and is catalyzed by the cytochrome c NO₂^- reductase enzyme. This biological reaction inspired scientists to explore the reduction of nitrogen oxyanions, such as nitrate (NO₃^-) and NO₂^- in wastewater, to produce the more valuable NH₃ product. It is widely known that copper (Cu)-based nanoparticles (NPs) are selective for the NO₃^- reduction reaction (NO₃^-RR), but the NO₂^-RR has not been well explored. Therefore, we attempted to address the electrocatalytic conversion of NO₂^- to NH₃ using Cu@Cu₂O core-shell NPs to simultaneously treat wastewater by removing NO₂^- and producing valuable NH₃. The Cu@Cu₂O core-shell NPs were constructed using the pulsed laser ablation of Cu sheet metal in water. The core-shell nanostructure of these particles was confirmed by various characterization techniques. Subsequently, the removal of NO₂^- and the ammonium (NH₄⁺)-N yield rate were estimated using the Griess and indophenol blue methods, respectively. Impressively, the Cu@Cu₂O core-shell NPs exhibited outstanding NO₂^-RR activity, demonstrating a maximum NO₂^- removal efficiency of approximately 94% and a high NH₄⁺-N yield rate of approximately 0.03 mmol h^-1.cm^-2 at -1.6 V vs. a silver/silver chloride reference electrode under optimal conditions. The proposed NO₂^-RR mechanism revealed that the (111) facet of Cu favors the selective conversion of NO₂^- to NH₃ via a six-electron transfer. This investigation may offer a new insight for the rational design and detailed mechanistic understanding of electrocatalyst architecture for the effective conversion of NO₂^- to NH₄⁺.

A Review on Pulsed Laser Preparation of Nanocomposites in Liquids and Their Applications in Photocatalysis

The purpose of photocatalysis is to realize the conversion between solar energy and chemical energy, and it is essential to develop a high-performance photocatalyst under visible-light irradiation. The conventional methods for photocatalyst preparation are mainly wet chemical routes, and abundant yields can be obtained. However, the products are not neat and accompanied by chemical groups and impurities, which are not beneficial for the enhancement of photocatalytic performance. In recent years, as a powerful tool for nanomaterial fabrication, pulsed laser heating in a liquid medium has been utilized to prepare a variety of nanocomposites. Products with synergistic effects and high crystallinity can be rapidly prepared under pulsed laser selective heating, which is beneficial for obtaining more effective photocatalytic performance. In this review, the typical characteristics of pulsed laser heating in liquids and their prepared nanocomposites for photocatalytic applications are summarized. This review not only highlights the innovative works of pulsed-laser-prepared nanocomposites in liquids for photocatalysis but also briefly introduces the specific challenges and prospects of this field.

Recent Advancements in Two-Dimensional Layered Molybdenum and Tungsten Carbide-Based Materials for Efficient Hydrogen Evolution Reactions

Green and renewable energy is the key to overcoming energy-related challenges such as fossil-fuel depletion and the worsening of environmental habituation. Among the different clean energy sources, hydrogen is considered the most impactful energy carrier and is touted as an alternate fuel for clean energy needs. Even though noble metal catalysts such as Pt, Pd, and Au exhibit excellent hydrogen evolution reaction (HER) activity in acid media, their earth abundance and capital costs are highly debatable. Hence, developing cost-effective, earth-abundant, and conductive electrocatalysts is crucial. In particular, various two-dimensional (2D) transition metal carbides and their compounds are gradually emerging as potential alternatives to noble metal-based catalysts. Owing to their improved hydrophilicity, good conductivity, and large surface areas, these 2D materials show superior stability and excellent catalytic performances during the HER process. This review article is a compilation of the different synthetic protocols, their impact, effects of doping on molybdenum and tungsten carbides and their derivatives, and their application in the HER process. The paper is more focused on the detailed strategies for improving the HER activity, highlights the limits of molybdenum and tungsten carbide-based electrocatalysts in electro-catalytic process, and elaborates on the future advancements expected in this field.

Fabrication of Biomass Derived Pt-Ni Bimetallic Catalyst and Its Selective Hydrogenation for 4-Nitrostyrene

The hydrogenation products of aromatic molecules with reducible groups (such as C=C, NO₂, C=O, etc.) are relatively critical intermediate compounds in fine chemicals, but how to accurately reduce only specific groups is still challenging. In this work, a bimetallic Pt-Ni/Chitin catalyst was prepared for the first time by using renewable biomass resource chitin as support. As the carrier, the chitin was constructed into porous nanofibrous microspheres through the sol-gel strategy, which was favorable for the adhesion of nano-metals and the exchange of reactive substances due to its large surface area, porous structure, and rich functional groups. Then the Pt-Ni/Chitin catalyst was applied to selective hydrogenation with the model substrate of 4-nitrostyrene. As the highly dispersed Pt-Ni NPs with abundant exposed active sites and the synergistic effect of bimetals, the Pt-Ni/Chitin catalyst could efficiently and selectively hydrogenate only NO₂ or C=C with yields of ~99% and TOF of 660 h^-1, as well as good stability. This utilization of biomass resources to build catalyst materials would be important for the green and sustainable chemistry.