Irradiance controls photodynamic efficacy and tissue heating in experimental tumours: implication for interstitial PDT of locally advanced cancer

Increasing the Dye Payload of Cetuximab-IRDye800CW Enables Photodynamic Therapy

Cetuximab (Cet)-IRDye800CW, among other antibody-IRDye800CW conjugates, is a potentially effective tool for delineating tumor margins during fluorescence image-guided surgery (IGS). However, residual disease often leads to recurrence. Photodynamic therapy (PDT) following IGS is proposed as an approach to eliminate residual disease but suffers from a lack of molecular specificity for cancer cells. Antibody-targeted PDT offers a potential solution for this specificity problem. In this study, we show, for the first time, that Cet-IRDye800CW is capable of antibody-targeted PDT in vitro when the payload of dye molecules is increased from 2 (clinical version) to 11 per antibody. Cet-IRDye800CW (1:11) produces singlet oxygen, hydroxyl radicals, and peroxynitrite upon activation with 810 nm light. In vitro assays on FaDu head and neck cancer cells confirm that Cet-IRDye800CW (1:11) maintains cancer cell binding specificity and is capable of inducing up to ∼90% phototoxicity in FaDu cancer cells. The phototoxicity of Cet-IRDye800CW conjugates using 810 nm light follows a dye payload-dependent trend. Cet-IRDye800CW (1:11) is also found to be more phototoxic to FaDu cancer cells and less toxic in the dark than the approved chromophore indocyanine green, which can also act as a PDT agent. We propose that antibody-targeted PDT using high-payload Cet-IRDye800CW (1:11) could hold potential for eliminating residual disease postoperatively when using sustained illumination devices, such as fiber optic patches and implantable surgical bed balloon applicators. This approach could also potentially be applicable to a wide variety of resectable cancers that are amenable to IGS-PDT, using their respective approved full-length antibodies as a template for high-payload IRDye800CW conjugation.

Effectiveness of laser pulsed irradiation for antimicrobial photodynamic therapy

The aim of this study was to compare two types of light irradiation devices for antimicrobial photodynamic therapy (aPDT). A 660-nm light-emitting diode (LED) and a 665-nm laser diode (LD) were used for light irradiation, and 0.1 mg/L TONS 504, a cationic chlorin derivative, was used as the photosensitizer. We evaluated the light attenuation along the vertical and horizontal directions, temperature rise following light irradiation, and aPDT efficacy against Staphylococcus aureus under different conditions: TONS 504 only, light irradiation only, and TONS 504 with either LED (30 J/cm2) or LD light irradiation (continuous: 30 J/cm2; pulsed: 20 J/cm2 at 2/3 duty cycle, 10 J/cm2 at 1/3 duty cycle). Both LED and LD light intensities were inversely proportional to the square of the vertical distance from the irradiated area. Along the horizontal distance from the nadir of the light source, the LED light intensity attenuated according to the cosine quadrature law, while the LD light intensity did not attenuate within the measurable range. Following light irradiation, the temperature rise increased as the TONS 504 concentration increased in the order of pulsed LD < continuous LD < LED irradiation. aPDT with light irradiation only or TONS 504 only had no antimicrobial effect, while aPDT with TONS 504 under continuous or pulsed LD light irradiation provided approximately 3 log reduction at 30 J/cm2 and 20 J/cm2 and approximately 2 log reduction at 10 J/cm2. TONS 504-aPDT under pulsed LD light irradiation provided anti-microbial effect without significant temperature rise.

Anti-Cancer Effect of Chlorophyllin-Assisted Photodynamic Therapy to Induce Apoptosis through Oxidative Stress on Human Cervical Cancer

Photodynamic therapy is an alternative approach to treating tumors that utilizes photochemical reactions between a photosensitizer and laser irradiation for the generation of reactive oxygen species. Currently, natural photosensitive compounds are being promised to replace synthetic photosensitizers used in photodynamic therapy because of their low toxicity, lesser side effects, and high solubility in water. Therefore, the present study investigated the anti-cancer efficacy of chlorophyllin-assisted photodynamic therapy on human cervical cancer by inducing apoptotic response through oxidative stress. The chlorophyllin-assisted photodynamic therapy significantly induced cytotoxicity, and the optimal conditions were determined based on the results, including laser irradiation time, laser power density, and chlorophyllin concentration. In addition, reactive oxygen species generation and Annexin V expression level were detected on the photodynamic reaction-treated HeLa cells under the optimized conditions to evaluate apoptosis using a fluorescence microscope. In the Western blotting analysis, the photodynamic therapy group showed the increased protein expression level of the cleaved caspase 8, caspase 9, Bax, and cytochrome C, and the suppressed protein expression level of Bcl-2, pro-caspase 8, and pro-caspase 9. Moreover, the proposed photodynamic therapy downregulated the phosphorylation of AKT1 in the HeLa cells. Therefore, our results suggest that the chlorophyllin-assisted photodynamic therapy has potential as an antitumor therapy for cervical cancer.

Computational Optimization of Irradiance and Fluence for Interstitial Photodynamic Therapy Treatment of Patients with Malignant Central Airway Obstruction

There are no effective treatments for patients with extrinsic malignant central airway obstruction (MCAO). In a recent clinical study, we demonstrated that interstitial photodynamic therapy (I-PDT) is a safe and potentially effective treatment for patients with extrinsic MCAO. In previous preclinical studies, we reported that a minimum light irradiance and fluence should be maintained within a significant volume of the target tumor to obtain an effective PDT response. In this paper, we present a computational approach to personalized treatment planning of light delivery in I-PDT that simultaneously optimizes the delivered irradiance and fluence using finite element method (FEM) solvers of either Comsol Multiphysics^® or Dosie™ for light propagation. The FEM simulations were validated with light dosimetry measurements in a solid phantom with tissue-like optical properties. The agreement between the treatment plans generated by two FEMs was tested using typical imaging data from four patients with extrinsic MCAO treated with I-PDT. The concordance correlation coefficient (CCC) and its 95% confidence interval (95% CI) were used to test the agreement between the simulation results and measurements, and between the two FEMs treatment plans. Dosie with CCC = 0.994 (95% CI, 0.953-0.996) and Comsol with CCC = 0.999 (95% CI, 0.985-0.999) showed excellent agreement with light measurements in the phantom. The CCC analysis showed very good agreement between Comsol and Dosie treatment plans for irradiance (95% CI, CCC: 0.996-0.999) and fluence (95% CI, CCC: 0.916-0.987) in using patients' data. In previous preclinical work, we demonstrated that effective I-PDT is associated with a computed light dose of ≥45 J/cm² when the irradiance is ≥8.6 mW/cm² (i.e., the effective rate-based light dose). In this paper, we show how to use Comsol and Dosie packages to optimize rate-based light dose, and we present Dosie's newly developed domination sub-maps method to improve the planning of the delivery of the effective rate-based light dose. We conclude that image-based treatment planning using Comsol or Dosie FEM-solvers is a valid approach to guide the light dosimetry in I-PDT of patients with MCAO.

Integrating clinical access limitations into iPDT treatment planning with PDT-SPACE

PDT-SPACE is an open-source software tool that automates interstitial photodynamic therapy treatment planning by providing patient-specific placement of light sources to destroy a tumor while minimizing healthy tissue damage. This work extends PDT-SPACE in two ways. The first enhancement allows specification of clinical access constraints on light source insertion to avoid penetrating critical structures and to minimize surgical complexity. Constraining fiber access to a single burr hole of adequate size increases healthy tissue damage by 10%. The second enhancement generates an initial placement of light sources as a starting point for refinement, rather than requiring entry of a starting solution by the clinician. This feature improves productivity and also leads to solutions with 4.5% less healthy tissue damage. The two features are used in concert to perform simulations of various surgery options of virtual glioblastoma multiforme brain tumors.

Advances in the Application of Preclinical Models in Photodynamic Therapy for Tumor: A Narrative Review

Photodynamic therapy (PDT) is a non-invasive laser light local treatment that has been utilized in the management of a wide variety of solid tumors. Moreover, the evaluation of efficacy, adverse reactions, the development of new photosensitizers and the latest therapeutic regimens are inseparable from the preliminary exploration in preclinical studies. Therefore, our aim was to better comprehend the characteristics and limitations of these models and to provide a reference for related research.

METHODS

We searched the databases, including PubMed, Web of Science and Scopus for the past 25 years of original research articles on the feasibility of PDT in tumor treatment based on preclinical experiments and animal models. We provided insights into inclusion and exclusion criteria and ultimately selected 40 articles for data synthesis.

RESULTS

After summarizing and comparing the methods and results of these studies, the experimental model selection map was drawn. There are 7 main preclinical models, which are used for different research objectives according to their characteristics.

CONCLUSIONS

Based on this narrative review, preclinical experimental models are crucial to the development and promotion of PDT for tumors. The traditional animal models have some limitations, and the emergence of organoids may be a promising new insight.

A Monte Carlo simulation for Moving Light Source in Intracavity PDT

We developed a simulation method for modeling the light fluence delivery in intracavity Photodynamic Therapy (icav-PDT) for pleural lung cancer using a moving light source. Due to the large surface area of the pleural lung cavity, the light source needs to be moved to deliver a uniform dose around the entire cavity. While multiple fixed detectors are used for dosimetry at a few locations, an accurate simulation of light fluence and fluence rate is still needed for the rest of the cavity. We extended an existing Monte Carlo (MC) based light propagation solver to support moving light sources by densely sampling the continuous light source trajectory and assigning the proper number of photon packages launched along the way. The performance of Simphotek GPU CUDA-based implementation of the method - PEDSy-MC - has been demonstrated on a life-size lung-shaped phantom, custom printed for testing icav-PDT navigation system at the Perlman School of Medicine (PSM) - calculations completed under a minute (for some cases) and within minutes have been achieved. We demonstrate results within a 5% error of the analytic solution for multiple detectors in the phantom. PEDSy-MC is accompanied by a dose-cavity visualization tool that allows real-time inspection of dose values of the treated cavity in 2D and 3D, which will be expanded to ongoing clinical trials at PSM. PSM has developed a technology to measure 8-detectors in a pleural cavity phantom using Photofrin-mediated PDT that has been used during validation.

Three-dimensional image-guided topical photodynamic therapy system with light dosimetry dynamic planning and monitoring

Photodynamic therapy (PDT) has shown significant potential for skin disease treatment. As a key element, light is critical to influencing its treatment outcome, and light dosimetry is an issue of much concern for researchers. However, because of three-dimensional irregularity in shape and patient's movement during the therapy, irradiance hardly keeps uniform on the lesion and flux measurement remains a challenge. In this work, we report the development of a three-dimensional image-guided PDT system, and the method of dynamic irradiance planning and flux monitoring for lesions in different poses. This system comprises a three-dimensional camera for monitoring patients' movement during therapy, a computer for data analysis and processing, and a homemade LED array for forming uniform irradiance on lesions. Simulations on lesions of the face and arm show that the proposed system significantly increases effective therapy area, enhances irradiance uniformity, is able to visualize flux on the lesion, and reduces risks of burns during PDT. The developed PDT system is promising for optimizing procedures of PDT and providing better treatment outcomes by delivering controllable irradiance and flux on lesions even when a patient is moving.

An open-source LED array illumination system for automated multiwell plate cell culture photodynamic therapy experiments

Photodynamic therapy (PDT) research would benefit from an automated, low-cost, and easy-to-use cell culture light treatment setup capable of illuminating multiple well replicates within standard multiwell plate formats. We present an LED-array suitable for performing high-throughput cell culture PDT experiments. The setup features a water-cooling loop to keep the LED-array temperature nearly constant, thus stabilizing the output power and spectrum. The setup also features two custom-made actuator arms, in combination with a pulse-width-modulation (PWM) technique, to achieve programmable and automatic light exposures for PDT. The setup operates at ~ 690 nm (676-702 nm, spectral output full-width half-maximum) and the array module can be readily adapted to other LED wavelengths. This system provides an illumination field with adjustable irradiance up to 400 mW/cm² with relatively high spectral and power stability comparing with previously reported LED-based setups. The light doses provided by the LED array were validated with comparison to traditional laser PDT. This open-source illumination platform (including the detailed technical description, fabrication protocols, and parts list provided here) helps to make custom light sources more accessible and of practical use for photomedicine research.

Interstitial Photothermal Therapy Generates Durable Treatment Responses in Neuroblastoma

Photothermal therapy (PTT) represents a promising modality for tumor control typically using infrared light-responsive nanoparticles illuminated by a wavelength-matched external laser. However, due to the constraints of light penetration, PTT is generally restricted to superficially accessible tumors. With the goal of extending the benefits of PTT to all tumor settings, interstitial PTT (I-PTT) is evaluated by the photothermal activation of intratumorally administered Prussian blue nanoparticles with a laser fiber positioned interstitially within the tumor. This interstitial fiber, which is fitted with a terminal diffuser, distributes light within the tumor microenvironment from the "inside-out" as compared to from the "outside-in" traditionally observed during superficially administered PTT (S-PTT). I-PTT improves the heating efficiency and heat distribution within a target treatment area compared to S-PTT. Additionally, I-PTT generates increased cytotoxicity and thermal damage at equivalent thermal doses, and elicits immunogenic cell death at lower thermal doses in targeted neuroblastoma tumor cells compared to S-PTT. In vivo, I-PTT induces significantly higher long-term tumor regression, lower rates of tumor recurrence, and improved long-term survival in multiple syngeneic murine models of neuroblastoma. This study highlights the significantly enhanced therapeutic benefit of I-PTT compared to traditional S-PTT as a promising treatment modality for solid tumors.

First-In-Human Computer-Optimized Endobronchial Ultrasound-Guided Interstitial Photodynamic Therapy for Patients With Extrabronchial or Endobronchial Obstructing Malignancies

Objective

Patients with inoperable extrabronchial or endobronchial tumors who are not candidates for curative radiotherapy have dire prognoses with no effective long-term treatment options. To reveal that our computer-optimized interstitial photodynamic therapy (I-PDT) is safe and potentially effective in the treatment of patients with inoperable extra or endobronchial malignancies inducing central airway obstructions.

Methods

High-spatial resolution computer simulations were used to personalize the light dose rate and dose for each tumor. Endobronchial ultrasound with a transbronchial needle was used to place the optical fibers within the tumor according to an individualized plan. The primary and secondary end points were safety and overall survival, respectively. An exploratory end point evaluated changes in immune markers.

Results

Eight patients received I-PDT with planning, and five of these received additional external beam PDT. Two additional patients received external beam PDT. The treatment was declared safe. Three of 10 patients are alive at 26.3, 12, and 8.3 months, respectively, after I-PDT. The treatments were able to deliver a prescribed light dose rate and dose to 87% to 100% and 18% to 92% of the tumor volumes, respectively. A marked increase in the proportion of monocytic myeloid-derived suppressor cells expressing programmed death-ligand 1 was measured in four of seven patients.

Conclusions

Image-guided light dosimetry for I-PDT with linear endobronchial ultrasound transbronchial needle is safe and potentially beneficial in increasing overall survival of patients. I-PDT has a positive effect on the immune response including an increase in the proportion of programmed death-ligand 1-expressing monocytic myeloid-derived suppressor cells.

Deep-Tissue Activation of Photonanomedicines: An Update and Clinical Perspectives

Simple Summary

Photodynamic therapy (PDT) is a light-activated treatment modality, which is being clinically used and further developed for a number of premalignancies, solid tumors, and disseminated cancers. Nanomedicines that facilitate PDT (photonanomedicines, PNMs) have transformed its safety, efficacy, and capacity for multifunctionality. This review focuses on the state of the art in deep-tissue activation technologies for PNMs and explores how their preclinical use can evolve towards clinical translation by harnessing current clinically available instrumentation.

Abstract

With the continued development of nanomaterials over the past two decades, specialized photonanomedicines (light-activable nanomedicines, PNMs) have evolved to become excitable by alternative energy sources that typically penetrate tissue deeper than visible light. These sources include electromagnetic radiation lying outside the visible near-infrared spectrum, high energy particles, and acoustic waves, amongst others. Various direct activation mechanisms have leveraged unique facets of specialized nanomaterials, such as upconversion, scintillation, and radiosensitization, as well as several others, in order to activate PNMs. Other indirect activation mechanisms have leveraged the effect of the interaction of deeply penetrating energy sources with tissue in order to activate proximal PNMs. These indirect mechanisms include sonoluminescence and Cerenkov radiation. Such direct and indirect deep-tissue activation has been explored extensively in the preclinical setting to facilitate deep-tissue anticancer photodynamic therapy (PDT); however, clinical translation of these approaches is yet to be explored. This review provides a summary of the state of the art in deep-tissue excitation of PNMs and explores the translatability of such excitation mechanisms towards their clinical adoption. A special emphasis is placed on how current clinical instrumentation can be repurposed to achieve deep-tissue PDT with the mechanisms discussed in this review, thereby further expediting the translation of these highly promising strategies.

The photosensitizer emodin is concentrated in the gills of the fungus Cortinarius rubrophyllus

The colorful agaricoid fruiting bodies of dermocyboid Cortinarii owe their magnificent hue to a mixture of anthraquinone (AQ) pigments. Recently, it was discovered that some of these fungal anthraquinones have an impressive photopharmacological effect. The question, therefore, arises as to whether these pigments are also of ecological or functional significance. According to the optimal defense hypothesis, toxic molecules should be enriched in spore-producing structures, such as the gills of agarics. To test this hypothesis, we studied the distribution of fungal AQs in the fruiting body of Cortinarius rubrophyllus. The fungus belongs to the well-studied Cortinarius subgenus Dermocybe but has not been chemically characterized. Here, we report on the pigment profile of this beautiful fungus and focus on the distribution of anthraquinone pigments in the fruiting body for the first time. Here it is statistically confirmed that the potent photosensitizer emodin is significantly enriched in the gills. Furthermore, we show that the extract is photoactive against cancer cells and bacteria.

A predictive model for personalization of nanotechnology-based phototherapy in cancer treatment

A major challenge in radiation oncology is the prediction and optimization of clinical responses in a personalized manner. Recently, nanotechnology-based cancer treatments are being combined with photodynamic therapy (PDT) and photothermal therapy (PTT). Predictive models based on machine learning techniques can be used to optimize the clinical setup configuration, including such parameters as laser radiation intensity, treatment duration, and nanoparticle features. In this article we demonstrate a methodology that can be used to identify the optimal treatment parameters for PDT and PTT by collecting data from in vitro cytotoxicity assay of PDT/PTT-induced cell death using a single nanocomplex. We construct three machine learning prediction models, employing regression, interpolation, and low- degree analytical function fitting, to predict the laser radiation intensity and duration settings that maximize the treatment efficiency. To examine the accuracy of these prediction models, we construct a dedicated dataset for PDT, PTT, and a combined treatment; this dataset is based on cell death measurements after light radiation treatment and is divided into training and test sets. The preliminary results show that the performance of all three models is sufficient, with death rate errors of 0.09, 0.15, and 0.12 for the regression, interpolation, and analytical function fitting approaches, respectively. Nevertheless, due to its simple form, the analytical function method has an advantage in clinical application and can be used for further analysis of the sensitivity of performance to the treatment parameters. Overall, the results of this study form a baseline for a future personalized prediction model based on machine learning in the domain of combined nanotechnology- and phototherapy-based cancer treatment.

In Vivo Models for Studying Interstitial Photodynamic Therapy of Locally Advanced Cancer

Interstitial photodynamic therapy (I-PDT) is a promising therapy considered for patients with locally advanced cancer. In I-PDT, laser fibers are inserted into the tumor for effective illumination and activation of the photosensitizer in a large tumor. The intratumoral light irradiance and fluence are critical parameters that affect the response to I-PDT. In vivo animal models are required to conduct light dose studies, to define optimal irradiance and fluence for I-PDT. Here we describe two animal models with locally advanced tumors that can be used to evaluate the response to I-PDT. One model is the C3H mouse bearing large subcutaneous SCCVII carcinoma (400-600 mm³). Using this murine model, multiple light regimens with one or two optical fibers with cylindrical diffuser ends (cylindrical diffuser fiber, CDF) can be used to study tumor response to I-PDT. However, tissue heating may occur when 630 nm therapeutic light is delivered through CDF at an intensity ≥60 mW/cm and energy ≥100 J/cm. These thermal effects can impact tumor response while treating locally advanced mice tumors. Magnetic resonance imaging and thermometry can be used to study these thermal effects. A larger animal model, New Zealand White rabbit with VX2 carcinoma (~5000 mm³) implanted in either the sternomastoid (neck implantation model) or the biceps femoris muscle (thigh implantation model), can be used to study I-PDT with image-based pretreatment planning using computed tomography. In the VX2 model, the light delivery can include the use of multiple laser fibers to test light dosimetry and delivery that are relevant for clinical use of I-PDT.

Irradiance uniformity optimization for a photodynamic therapy treatment device with 3D scanner

SIGNIFICANCE

The light dose in photodynamic therapy (PDT) has a considerable influence on its treatment effect, and irradiance uniformity is an issue of much concern for researchers. However, achieving intelligent and personalized dosimetry adjustments remains a challenge for current PDT instruments.

AIM

To meet the requirements of intelligent and personalized dosimetry adjustments for the light dose on an irregular surface, a new PDT device with its optimal control method is proposed.

APPROACH

This research introduces a new PDT device that includes a 3D scanner, a light-emitting diode (LED) array, and a computer. The 3D scanner is proposed to generate the point cloud of the lesion and the LED array light source, and obtain the relative position and rotation parameters between them. Then, an image segmentation algorithm is used to segment the lesion point cloud into several cluster regions. Last, the current of each LED unit is adjusted separately to achieve the expected irradiance on each cluster.

RESULTS

Compared with the general light source, the optimized light source increases the effective irradiance area by 9% to 15% and improves its uniformity by ∼9  %   on a human port-wine stain head model.

CONCLUSIONS

The device and its optimal method may be used for optimizing the light dosimetry to realize intelligent and personalized treatment.

Monotherapy and Combination Therapy Using Anti-Angiogenic Nanoagents to Fight Cancer

Anti-angiogenic therapy, targeting vascular endothelial cells (ECs) to prevent tumor growth, has been attracting increasing attention in recent years, beginning with bevacizumab (Avastin) through its Phase II/III clinical trials on solid tumors. However, these trials showed only modest clinical efficiency; moreover, anti-angiogenic therapy may induce acquired resistance to the drugs employed. Combining advanced drug delivery techniques (e.g., nanotechnology) or other therapeutic strategies (e.g., chemotherapy, radiotherapy, phototherapy, and immunotherapy) with anti-angiogenic therapy results in significantly synergistic effects and has opened a new horizon in fighting cancer. Herein, clinical difficulties in using traditional anti-angiogenic therapy are discussed. Then, several promising applications of anti-angiogenic nanoagents in monotherapies and combination therapies are highlighted. Finally, the challenges and perspectives of anti-angiogenic cancer therapy are summarized. A useful introduction to anti-angiogenic strategies, which may significantly improve therapeutic outcomes, is thus provided.

Laser-induced optothermal response of gold nanoparticles: From a physical viewpoint to cancer treatment application

Gold nanoparticles (GNPs)-based photothermal therapy (PTT) is a promising minimally invasive thermal therapy for the treatment of focal malignancies. Although GNPs-based PTT has been known for over two decades and GNPs possess unique properties as therapeutic agents, the delivery of a safe and effective therapy is still an open question. This review aims at providing relevant and recent information on the usage of GNPs in combination with the laser to treat cancers, pointing out the practical aspects that bear on the therapy outcome. Emphasis is given to the assessment of the GNPs' properties and the physical mechanisms underlying the laser-induced heat generation in GNPs-loaded tissues. The main techniques available for temperature measurement and the current theoretical simulation approaches predicting the therapeutic outcome are reviewed. Topical challenges in delivering safe thermal dosage are also presented with the aim to discuss the state-of-the-art and the future perspective in the field of GNPs-mediated PTT.

Recent advances in innovative strategies for enhanced cancer photodynamic therapy

Photodynamic therapy (PDT), a non-invasive therapeutic modality, has received increasing attention owing to its high selectivity and limited side effects. Although significant clinical research progress has been made in PDT, the breadth and depth of its clinical application have not been fully realized due to the limitations such as inadequate light penetration depth, non-targeting photosensitizers (PSs), and tumor hypoxia. Consequently, numerous investigations put their emphasis on innovative strategies to overcome the aforementioned limitations and enhance the therapeutic effect of PDT. Herein, up-to-date advances in these innovative methods for PDT are summarized by introducing the design of PS systems, their working mechanisms and application examples. In addition, current challenges of these innovative strategies for clinical application, and future perspectives on further improvement of PDT are also discussed.

An Optical Surface Applicator for Intraoperative Photodynamic Therapy

BACKGROUND AND OBJECTIVES

Intraoperative photodynamic therapy (IO-PDT) is typically administered by a handheld light source. This can result in uncontrolled distribution of light irradiance that impacts tissue and tumor response to photodynamic therapy. The objective of this work was to characterize a novel optical surface applicator (OSA) designed to administer controlled light irradiance in IO-PDT.

STUDY DESIGN/MATERIALS AND METHODS

An OSA was constructed from a flexible silicone mesh applicator with multiple cylindrically diffusing optical fibers (CDF) placed into channels of the silicone. Light irradiance distribution, at 665 nm, was evaluated on the OSA surface and after passage through solid tissue-mimicking optical phantoms by measurements from a multi-channel dosimetry system. As a proof of concept, the light administration of the OSA was tested in a pilot study by conducting a feasibility and performance test with 665-nm laser light to activate 2-(1'-hexyloxyethyl) pyropheophorbide-a (HPPH) in the thoracic cavity of adult swine.

RESULTS

At the OSA surface, the irradiance distribution was non-uniform, ranging from 128 to 346 mW/cm2 . However, in the tissue-mimicking phantoms, beam uniformity improved markedly, with irradiance ranges of 39-153, 33-87, and 12-28 mW/cm2 measured at phantom thicknesses of 3, 5, and 10 mm, respectively. The OSA safely delivered the prescribed light dose to the thoracic cavities of four swine.

CONCLUSIONS

The OSA can provide predictable light irradiances for administering a well-defined and potentially effective therapeutic light in IO-PDT. Lasers Surg. Med. © 2019 Wiley Periodicals, Inc.

TLD1433-Mediated Photodynamic Therapy with an Optical Surface Applicator in the Treatment of Lung Cancer Cells In Vitro

Intra-operative photodynamic therapy (IO-PDT) in combination with surgery for the treatment of non-small cell lung cancer and malignant pleural mesothelioma has shown promise in improving overall survival in patients. Here, we developed a PDT platform consisting of a ruthenium-based photosensitizer (TLD1433) activated by an optical surface applicator (OSA) for the management of residual disease. Human lung adenocarcinoma (A549) cell viability was assessed after treatment with TLD1433-mediated PDT illuminated with either 532- or 630-nm light with a micro-lens laser fiber. This TLD1433-mediated PDT induced an EC50 of 1.98 μM (J/cm2) and 4807 μM (J/cm2) for green and red light, respectively. Cells were then treated with 10 µM TLD1433 in a 96-well plate with the OSA using two 2-cm radial diffusers, each transmitted 532 nm light at 50 mW/cm for 278 s. Monte Carlo simulations of the surface light propagation from the OSA computed light fluence (J/cm2) and irradiance (mW/cm2) distribution. In regions where 100% loss in cell viability was measured, the simulations suggest that >20 J/cm2 of 532 nm was delivered. Our studies indicate that TLD1433-mediated PDT with the OSA and light simulations have the potential to become a platform for treatment planning for IO-PDT.

Blood Flow Measurements Enable Optimization of Light Delivery for Personalized Photodynamic Therapy

Fluence rate is an effector of photodynamic therapy (PDT) outcome. Lower light fluence rates can conserve tumor perfusion during some illumination protocols for PDT, but then treatment times are proportionally longer to deliver equivalent fluence. Likewise, higher fluence rates can shorten treatment time but may compromise treatment efficacy by inducing blood flow stasis during illumination. We developed blood-flow-informed PDT (BFI-PDT) to balance these effects. BFI-PDT uses real-time noninvasive monitoring of tumor blood flow to inform selection of irradiance, i.e., incident fluence rate, on the treated surface. BFI-PDT thus aims to conserve tumor perfusion during PDT while minimizing treatment time. Pre-clinical studies in murine tumors of radiation-induced fibrosarcoma (RIF) and a mesothelioma cell line (AB12) show that BFI-PDT preserves tumor blood flow during illumination better than standard PDT with continuous light delivery at high irradiance. Compared to standard high irradiance PDT, BFI-PDT maintains better tumor oxygenation during illumination and increases direct tumor cell kill in a manner consistent with known oxygen dependencies in PDT-mediated cytotoxicity. BFI-PDT promotes vascular shutdown after PDT, thereby depriving remaining tumor cells of oxygen and nutrients. Collectively, these benefits of BFI-PDT produce a significantly better therapeutic outcome than standard high irradiance PDT. Moreover, BFI-PDT requires ~40% less time on average to achieve outcomes that are modestly better than those with standard low irradiance treatment. This contribution introduces BFI-PDT as a platform for personalized light delivery in PDT, documents the design of a clinically-relevant instrument, and establishes the benefits of BFI-PDT with respect to treatment outcome and duration.

Necrosis Depth and Photodynamic Threshold Dose with Redaporfin-PDT

Predicting the extent of necrosis in photodynamic therapy (PDT) is critical to ensure that the whole tumor is treated but vital structures, such as major blood vessels in the vicinity of the tumor, are spared. The models developed for clinical planning rely on empirical parameters that change with the nature of the photosensitizer and the target tissue. This work presents an in vivo study of the necrosis in the livers of rats due to PDT with a bacteriochlorin photosensitizer named redaporfin using both frontal illumination and interstitial illumination. Various doses of light at 750 nm were delivered 15 min postintravenous administration of redaporfin. Sharp boundaries between necrotic and healthy tissues were found. Frontal illumination allowed for the determination of the photodynamic threshold dose-1.5 × 10¹⁹  photons cm^-3 -which means that the regions of the tissues exposed to more than 11 mm of ROS evolved to necrosis. Interstitial illumination produced a necrotic radius of 0.7 cm for a light dose of 100 J cm^-1 and a redaporfin dose of 0.75 mg kg^-1 . The experimental data obtained can be used to inform and improve clinical planning with frontal and interstitial illumination protocols.

Irradiance, Photofrin® Dose and Initial Tumor Volume are Key Predictors of Response to Interstitial Photodynamic Therapy of Locally Advanced Cancers in Translational Models

The objective of the present study was to develop a predictive model for Photofrin® -mediated interstitial photodynamic therapy (I-PDT) of locally advanced tumors. Our finite element method was used to simulate 630-nm intratumoral irradiance and fluence for C3H mice and New Zealand White rabbits bearing large squamous cell carcinomas. Animals were treated with light only or I-PDT using the same light settings. I-PDT was administered with Photofrin® at 5.0 or 6.6 mg kg-1 , 24 h drug-light interval. The simulated threshold fluence was fixed at 45 J cm-2 while the simulated threshold irradiance varied, intratumorally. No cures were obtained in the mice treated with a threshold irradiance of 5.4 mW cm-2 . However, 20-90% of the mice were cured when the threshold irradiances were ≥8.6 mW cm-2 . In the rabbits treated with I-PDT, 13 of the 14 VX2 tumors showed either local control or were cured when threshold irradiances were ≥15.3 mW cm-2 and fluence was 45 J cm-2 . No tumor growth delay was observed in VX2 treated with light only (n = 3). In the mouse studies, there was a high probability (92.7%) of predicting cure when the initial tumor volume was below the median (493.9 mm3 ) and I-PDT was administered with a threshold intratumoral irradiance ≥8.6 mW cm-2 .

On the Development of a Light Dosimetry Planning Tool for Photodynamic Therapy in Arbitrary Shaped Cavities: Initial Results

Previous dosimetric studies during photodynamic therapy (PDT) of superficial lesions within a cavity such as the nasopharynx, demonstrated significant intra- and interpatient variations in fluence rate build-up as a result of tissue surface re-emitted and reflected photons, which depends on the optical properties. This scattering effect affects the response to PDT. Recently, a meta-tetra(hydroxyphenyl)chlorin-mediated PDT study of malignancies in the paranasal sinuses after salvage surgery was initiated. These geometries are complex in shape, with spatially varying optical properties. Therefore, preplanning and in vivo dosimetry is required to ensure an effective fluence delivered to the tumor. For this purpose, two 3D light distribution models were developed: first, a simple empirical model that directly calculates the fluence rate at the cavity surface using a simple linear function that includes the scatter contribution as function of the light source to surface distance. And second, an analytical model based on Lambert's cosine law assuming a global diffuse reflectance constant. The models were evaluated by means of three 3D printed optical phantoms and one porcine tissue phantom. Predictive fluence rate distributions of both models are within ± 20% accurate and have the potential to determine the optimal source location and light source output power settings.

Optimization of sapphire capillary needles for interstitial and percutaneous laser medicine

Sapphire capillary needles fabricated by edge-defined film-fed growth (EFG) technique hold strong potential in laser thermotherapy and photodynamic therapy, thanks to the advanced physical properties of sapphire. These needles feature an as-grown optical quality, their length is tens of centimeters, and they contain internal capillary channels, with open or closed ends. They can serve as optically transparent bearing elements with optical fibers introduced into their capillary channels in order to deliver laser radiation to biological tissues for therapeutic and, in some cases, diagnostic purposes. A potential advantage of the EFG-grown sapphire needles is associated with an ability to form the tip of a needle with complex geometry, either as-grown or mechanically treated, aimed at controlling the output radiation pattern. In order to examine a potential of the radiation pattern shaping, we present a set of fabricated sapphire needles with different tips. We studied the radiation patterns formed at the output of these needles using a He-Ne laser as a light source, and used intralipid-based tissue phantoms to proof the concept experimentally and the Monte-Carlo modeling to proof it numerically. The observed results demonstrate a good agreement between the numerical and experimental data and reveal an ability to control within wide limits the direction of tissue exposure to light and the amount of exposed tissue by managing the sapphire needle tip geometry.

Outcomes of patients with advanced non-small cell lung cancer and airway obstruction treated with photodynamic therapy and non-photodynamic therapy ablation modalities

Background

Non-small cell lung cancer (NSCLC) patients with central airway obstruction (CAO) may have better survival on systemic therapy if the airway patency is successfully restored by bronchoscopic interventions. It remains unclear which therapeutic bronchoscopic modality [laser, stenting, external beam radiation, brachytherapy and photodynamic therapy (PDT)] used for restoring airway patency positively affects outcomes in these patients. We analyzed the effectiveness of PDT in terms of mortality, and time to subsequent treatments in patients with stage III and IV NSCLC.

Methods

Study used Surveillance, Epidemiology, and End Results (SEER) Medicare linked data. We categorized NSCLC patients diagnosed between 2000 and 2011 and with stage III and IV, into three treatment groups: PDT + radiation ± chemotherapy, non-PDT ablation therapy + radiation ± chemotherapy, and radiation + chemotherapy. We analyzed all-cause and cause-specific mortality using Cox proportional hazard models with an inverse probability weighted propensity score adjustment. Time to subsequent treatment was analyzed using GLM model.

Results

For the PDT group, hazard for all-cause and cause-specific mortality was comparable to the radiation + chemotherapy group (HR =1.03, 95% CI: 0.73-1.45; and HR =1.04, 95% CI: 0.71-1.51, respectively). The non-PDT ablation group had higher hazard for all-cause (HR =1.22, 95% CI: 1.13-1.33) and cause-specific mortality (HR =1.10, 95% CI: 1.01-1.20), compared to the radiation + chemotherapy group. The PDT group had longer time to follow-up treatment, compared to non-PDT ablation group.

Conclusions

In our exploratory study of stage III and IV NSCLC patients with CAO, addition of PDT demonstrated hazard of mortality comparable to radiation + chemotherapy group. However, addition of non-PDT ablation showed higher mortality compared to the radiation + chemotherapy group. Future studies should investigate the efficacy and effectiveness of multimodal therapy including radiation, chemo, immunotherapy and bronchoscopic interventions.