Exploring Peltier effect in organic thermoelectric films

On-Chip Metamaterial-Enhanced Mid-Infrared Photodetectors with Built-In Encryption Features

The integration of mid-infrared (MIR) photodetectors with built-in encryption capabilities holds immense promise for advancing secure communications in decentralized networks and compact sensing systems. However, achieving high sensitivity, self-powered operation, and reliable performance at room temperature within a miniaturized form factor remains a formidable challenge, largely due to constraints in MIR light absorption and the intricacies of embedding encryption at the device level. Here, a novel on-chip metamaterial-enhanced, 2D tantalum nickel selenide (Ta₂NiSe₅)-based photodetector, meticulously designed with a custom-engineered plasmonic resonance microstructure to achieve self-powered photodetection in the nanoampere range is unveiled. Gold cross-shaped resonators are demonstrated that generate plasmon-induced ultrahot electrons, significantly enhancing the absorption of MIR photons with energies far below the bandgap and boosting electron thermalization in Ta₂NiSe₅, yielding a 0.1 V bias responsivity of 47 mA/W-an order of magnitude higher than previously reported values. Furthermore, the implementation of six reconfigurable optoelectronic logic computing ("AND", "OR", "NAND", "NOR", "XOR", and "XNOR") are illustrated via tailored optical and electrical input-output configurations, thereby establishing a platform for real-time infrared-encrypted communication. This work pioneers a new direction in secure MIR communications, advancing the development of high-performance, encryption-capable photonic systems.

Controlling the thermoelectric properties of organo-metallic coordination polymers through backbone geometry

Poly(nickel-benzene-1,2,4,5-tetrakis(thiolate)) (Ni-btt), an organometallic coordination polymer (OMCP) characterized by the coordination between benzene-1,2,4,5-tetrakis(thiolate) (btt) and Ni2+ ions, has been recognized as a promising p-type thermoelectric material. In this study, we employed a constitutional isomer based on benzene-1,2,3,4-tetrakis(thiolate) (ibtt) to generate the corresponding isomeric polymer, poly(nickel-benzene-1,2,3,4-tetrakis(thiolate)) (Ni-ibtt). Comparative analysis of Ni-ibtt and Ni-btt reveals several common infrared (IR) and Raman features attributed to their similar square-planar nickel-sulfur (Ni-S) coordination. Nevertheless, these two polymer isomers exhibit substantially different backbone geometries. Ni-btt possesses a linear backbone, whereas Ni-ibtt exhibits a more undulating, zig-zag-like structure. Consequently, Ni-ibtt demonstrates slightly higher solubility and an increased bandgap in comparison to Ni-btt. The most noteworthy dissimilarity, however, manifests in their thermoelectric properties. While Ni-btt exhibits p-type behavior, Ni-ibtt demonstrates n-type carrier characteristics. This intriguing divergence prompted further investigation into the influence of OMCP backbone geometry on the electronic structure and, particularly, the thermoelectric properties of these materials.

Fully inkjet-printed Ag2Se flexible thermoelectric devices for sustainable power generation

Flexible thermoelectric devices show great promise as sustainable power units for the exponentially increasing self-powered wearable electronics and ultra-widely distributed wireless sensor networks. While exciting proof-of-concept demonstrations have been reported, their large-scale implementation is impeded by unsatisfactory device performance and costly device fabrication techniques. Here, we develop Ag2Se-based thermoelectric films and flexible devices via inkjet printing. Large-area patterned arrays with microscale resolution are obtained in a dimensionally controlled manner by manipulating ink formulations and tuning printing parameters. Printed Ag2Se-based films exhibit (00 l)-textured feature, and an exceptional power factor (1097 μWm-1K-2 at 377 K) is obtained by engineering the film composition and microstructure. Benefiting from high-resolution device integration, fully inkjet-printed Ag2Se-based flexible devices achieve a record-high normalized power (2 µWK-2cm-2) and superior flexibility. Diverse application scenarios are offered by inkjet-printed devices, such as continuous power generation by harvesting thermal energy from the environment or human bodies. Our strategy demonstrates the potential to revolutionize the design and manufacture of multi-scale and complex flexible thermoelectric devices while reducing costs, enabling them to be integrated into emerging electronic systems as sustainable power sources.

Advanced Thermoelectric Textiles for Power Generation: Principles, Design, and Manufacturing

Self-powered wearable thermoelectric (TE) devices significantly reduce the inconvenience caused to users, especially in daily use of portable devices and monitoring personal health. The textile-based TE devices (TETs) exhibit the excellent flexibility, deformability, and light weight, which fulfill demands of long-term wearing for the human body. In comparison to traditional TE devices with their longstanding research history, TETs are still in an initial stage of growth. In recent years, TETs to provide electricity for low-power wearable electronics have attracted increasing attention. This review summarizes the recent progress of TETs from the points of selecting TE materials, scalable fabrication methods of TE fibers/yarns and TETs, structure design of TETs and reported high-performance TETs. The key points to develop TETs with outstanding TE properties and mechanical performance and better than available optimization strategies are discussed. Furthermore, remaining challenges and perspectives of TETs are also proposed to suggest practical applications for heat harvesting from human body.

Effect of Inevitable Heat Leap on the Conversion Efficiency of Thermoelectric Generators

Discrepancies between experimental and theoretical results in the study of thermoelectric generators (TEGs) have been a major long-standing problem in thermoelectric technology. In this Letter, we report that, besides interfacial resistance, the inevitable heat leap caused by the Peltier effect is the main factor affecting the conversion efficiency of TEGs. In fact, the heat leap is proven to have an impact of approximately 10% on the conversion efficiency of common TEGs. In addition, we enhance the formula for maximum conversion efficiency with heat leap from the classical expression to allow for the prediction of the performance of advanced materials in TEGs. For the first time, the experimental data from conversion efficiency corresponds exactly to that obtained theoretically by considering both the heat leap and interfacial resistivity.

Flexible Carbon Nanotube-Epitaxially Grown Nanocrystals for Micro-Thermoelectric Modules

Flexible thermoelectric materials have attracted increasing interest because of their potential use in thermal energy harvesting and high-spatial-resolution thermal management. However, a high-performance flexible micro-thermoelectric device (TED) compatible with the microelectronics fabrication process has not yet been developed. Here a universal epitaxial growth strategy is reported guided by 1D van der Waals-coupling, to fabricate freestanding and flexible hybrids comprised of single-wall carbon nanotubes and ordered (Bi,Sb)2 Te3 nanocrystals. High power factors ranging from ≈1680 to ≈1020 µW m-1 K-2 in the temperature range of 300-480 K, combined with a low thermal conductivity yield a high average figure of merit of ≈0.81. The fabricated flexible micro-TED module consisting of two p-n couples of freestanding thermoelectric hybrids has an unprecedented open circuit voltage of ≈22.7 mV and a power density of ≈0.36 W cm-2 under ≈30 K temperature difference, and a net cooling temperature of ≈22.4 K and a heat absorption density of ≈92.5 W cm-2 .

The Synergistic Effects between Liquid Crystal and Crystalline Phase on Photo-Responsive Elastomers toward Quick Photo-Responsive Performance

Adopting only a small amount of azobenzene molecular to design liquid crystal photo-responsive materials capable of quick response and flexible adjustability is in high demand but is challenging. Herein, azobenzenemolecules into polyurethane elastomer containing crystalline structure for preparing azobenzene liquid-crystal elastomers (ALCEs) are demonstrated and this phenomenon of the synergistic effects between liquid crystal and crystalline phase is discovered. The key point of the work is that the synthetic ALCEs can utilize the reversible isomerism capability of azobenzene molecules under light irradiation, which can pry the motion of the macromolecular crystalline region in system to realize the large macroscopic deformation of the photo-responsive behavior. Obviously, the ALCEs sample containing azobenzene molecule and polyethylene glycol crystallization can quickly bend, illuminated by ultraviolet light and rapidly straighten under green light. Under the same ultraviolet irradiation, the bending speed, final bending angle, recovery rate and recovery ratio of ALCEs are larger than that of ALCEs without any crystalline structure. This ALCEs based on the synergistic effects between liquid crystal and crystalline phase can break through the current dilemma that the application of traditional azobenzene photo-responsive materials is limited by their concentration, greatly expanding the design thought and their scope of application.

Direct Conversion of Phase-Transition Entropy into Electrochemical Thermopower and the Peltier Effect

A thermocell generates thermopower from a temperature difference (ΔT) between two electrodes. The converse process of thermocells is an electrochemical Peltier effect, which creates a ΔT on the electrodes by applying an external current. The Seebeck coefficient (Se ) of the electrochemical system is proportional to the entropy change of the redox reaction; therefore, a redox system having a significant entropy change is expected to increase the Se . In this study, a thermoresponsive polymer having a redox-active moiety, poly(N-isopropyl acrylamide-co-N-(2-acrylamide ethyl)-N'-n-propylviologen) (PNV), is used as the redox species of a thermocell. PNV2+ dication undergoes the coil-globule phase transition upon the reduction to PNV+ cation radical, and a large entropy change is introduced because water molecules are freed from the polymer chains. The Se of PNV thermocell drastically increased to +2.1 mV K-1 at the lower critical solution temperature (LCST) of PNV. The entropy change calculated from the increment of Se agrees with the value evaluated by differential scanning calorimetry. Moreover, the electrochemical Peltier effect is observed when the device temperature is increased above the LCST. This study shows that the large entropy change associated with the coil-globule phase transition can be used in electrochemical thermal management and refrigeration technologies.

Functional Materials and Innovative Strategies for Wearable Thermal Management Applications

Highlights

This article systematically reviews the thermal management wearables with a specific emphasis on materials and strategies to regulate the human body temperature. Thermal management wearables are subdivided into the active and passive thermal managing methods. The strength and weakness of each thermal regulatory wearables are discussed in details from the view point of practical usage in real-life.

Abstract

Thermal management is essential in our body as it affects various bodily functions, ranging from thermal discomfort to serious organ failures, as an example of the worst-case scenario. There have been extensive studies about wearable materials and devices that augment thermoregulatory functionalities in our body, employing diverse materials and systematic approaches to attaining thermal homeostasis. This paper reviews the recent progress of functional materials and devices that contribute to thermoregulatory wearables, particularly emphasizing the strategic methodology to regulate body temperature. There exist several methods to promote personal thermal management in a wearable form. For instance, we can impede heat transfer using a thermally insulating material with extremely low thermal conductivity or directly cool and heat the skin surface. Thus, we classify many studies into two branches, passive and active thermal management modes, which are further subdivided into specific strategies. Apart from discussing the strategies and their mechanisms, we also identify the weaknesses of each strategy and scrutinize its potential direction that studies should follow to make substantial contributions to future thermal regulatory wearable industries.

Direct observation of hot-electron-enhanced thermoelectric effects in silicon nanodevices

The study of thermoelectric behaviors in miniatured transistors is of fundamental importance for developing bottom-level thermal management. Recent experimental progress in nanothermetry has enabled studies of the microscopic temperature profiles of nanostructured metals, semiconductors, two-dimensional material, and molecular junctions. However, observations of thermoelectric (such as nonequilibrium Peltier and Thomson) effect in prevailing silicon (Si)-a critical step for on-chip refrigeration using Si itself-have not been addressed so far. Here, we carry out nanothermometric imaging of both electron temperature (T_e) and lattice temperature (T_L) of a Si nanoconstriction device and find obvious thermoelectric effect in the vicinity of the electron hotspots: When the electrical current passes through the nanoconstriction channel generating electron hotspots (with T_e~1500 K being much higher than T_L~320 K), prominent thermoelectric effect is directly visualized attributable to the extremely large electron temperature gradient (~1 K/nm). The quantitative measurement shows a distinctive third-power dependence of the observed thermoelectric on the electrical current, which is consistent with the theoretically predicted nonequilibrium thermoelectric effects. Our work suggests that the nonequilibrium hot carriers may be potentially utilized for enhancing the thermoelectric performance and therefore sheds new light on the nanoscale thermal management of post-Moore nanoelectronics.

Dynamical Behavior of Pure Spin Current in Organic Materials

Growing concentration on the novel information processing technology and low-cost, flexible materials make the spintronics and organic materials appealing for the future interdisciplinary investigations. Organic spintronics, in this context, has arisen and witnessed great advances during the past two decades owing to the continuous innovative exploitation of the charge-contained spin polarized current. Albeit with such inspiring facts, charge-absent spin angular momentum flow, namely pure spin currents (PSCs) are less probed in organic functional solids. In this review, the past exploring journey of PSC phenomenon in organic materials are retrospected, including non-magnetic semiconductors and molecular magnets. Starting with the basic concepts and the generation mechanism for PSC, the representative experimental observations of PSC in the organic-based networks are subsequently demonstrated and summarized, by accompanying explicit discussion over the propagating mechanism of net spin itself in the organic media. Finally, future perspectives on PSC in organic materials are illustrated mainly from the material point of view, including single molecule magnets, complexes for the organic ligands framework as well as the lanthanide metal complexes, organic radicals, and the emerging 2D organic magnets.

Recent advances in n-type and ambipolar organic semiconductors and their multi-functional applications

Organic semiconductors have received broad attention and research interest due to their unique integration of semiconducting properties with structural tunability, intrinsic flexibiltiy and low cost. In order to meet the requirements of organic electronic devices and their integrated circuits, p-type, n-type and ambipolar organic semiconductors are all necessary. However, due to the limitation in both material synthesis and device fabrication, the development of n-type and ambipolar materials is quite behind that of p-type materials. Recent development in synthetic methods of organic semiconductors greatly enriches the range of n-type and ambipolar materials. Moreover, the newly developed materials with multiple functions also put forward multi-functional device applications, including some emerging research areas. In this review, we give a timely summary on these impressive advances in n-type and ambipolar organic semiconductors with a special focus on their synthesis methods and advanced materials with enhanced properties of charge carrier mobility, integration of high mobility and strong emission and thermoelectric properties. Finally, multi-functional device applications are further demonstrated as an example of these developed n-type and ambipolar materials.

Realizing a 10 °C Cooling Effect in a Flexible Thermoelectric Cooler Using a Vortex Generator

In this study, flexible thermoelectric coolers (FTECs) are used to develop an alternative personalized cooling technology to achieve a large temperature drop of 10 °C and cooling capacity of 256 W m^-2 . Such an excellent cooling performance is attributed to the innovative design of the quadra-layered Ag₂ Se/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate structure in FTECs and the induced air vortices by the vortex generator attached to the hot surface of the device. The applied pulse-width modulation technique guarantees human body comfort at inconsistent ambient temperature by modulating the duty ratio of the power source, which also saves 35% of the power consumption. As a result, the as-prepared FTECs only consume 68.5 W so as to maintain a comfortable skin temperature (32 ± 0.5 °C) when the ambient temperature is at 31 °C. This technology provides a reliable and adjustable solution for personalized cooling in environments where comfortable temperatures are exceeded.

Soft Organic Thermoelectric Materials: Principles, Current State of the Art and Applications

The enormous demand for waste heat utilization and burgeoning eco-friendly wearable materials has triggered huge interest in the development of thermoelectric materials that can harvest low-cost energy resources by converting waste heat to electricity efficiently. In particular, due to their high flexibility, nontoxicity, cost-effectivity, and promising applicability in various fields, organic thermoelectric materials are drawing more attention compared with their toxic, expensive, heavy, and brittle inorganic counterparts. Organic thermoelectric materials are approaching the figure of merit of the inorganic ones via the construction and optimization of unique transport pathways and device geometries. This review presents the recent development of the interdependence and decoupling principles of the thermoelectric efficiency parameters as well as the new achievements of high performance organic thermoelectric materials. Moreover, this review also discusses the advances in the thermoelectric devices with emphasis on their energy-related applications. It is believed that organic thermoelectric materials are emerging as green energy alternatives rivaling their conventional inorganic counterparts in the efficient and pure electricity harvesting from waste heat and solar thermal energy.

Organic Thermoelectric Materials as the Waste Heat Remedy

The primary reason behind the search for novel organic materials for application in thermoelectric devices is the toxicity of inorganic substances and the difficulties associated with their processing for the production of thin, flexible layers. When Thomas Seebeck described a new phenomenon in Berlin in 1820, nobody could have predicted the future applications of the thermoelectric effect. Now, thermoelectric generators (TEGs) are used in watches, and thermoelectric coolers (TECs) are applied in cars, computers, and various laboratory equipment. Nevertheless, the future of thermoelectric materials lies in organic compounds. This paper discusses the developments made in thermoelectric materials, including small molecules, polymers, molecular junctions, and their applications as TEGs and/or TECs.

Thermoelectric Coolers: Progress, Challenges, and Opportunities

Owing to the free of noise, mechanical component, working fluid, and chemical reaction, thermoelectric cooling is regarded as a suitable solution to address the greenhouse emission for the broad cooling scenarios. Here, the significant progress of state-of-the-art thermoelectric coolers is comprehensively summarized and the related aspects of materials, fundamental design, heat sinks, and structures, are overviewed. Particularly, the usage of thermoelectric coolers in smart city, greenhouse, and personal and chip thermal management is highlighted. In the end, current challenges and future opportunities for further improvement of designs, performance, and applications of thermoelectric coolers are pointed out.

High performance polypyrrole/SWCNTs composite film as a promising organic thermoelectric material

Conducting polymer thermoelectric (TE) materials have received great attention due to their unique properties. In this work, polypyrrole (PPy)/single-walled carbon nanotubes (SWCNTs) composite films with improved TE performance have been prepared by chemical interfacial polymerization at the cyclohexane/water interface under a controlled temperature. Attributed to the smooth surface, higher conjugation length and more ordered molecular structure of the interfacial polymerized PPy film, the electrical conductivity can be as high as ∼500 S cm⁻¹. To further enhance the TE properties of PPy, SWCNT was added to construct a PPy/SWCNTs composite. Due to the synergistic effect between the two phases and the energy filtering effect at the interfaces between PPy and SWCNTs, the Seebeck coefficient of the composite enhanced significantly with the increase SWCNTs content. The composite shows an optimal power factor of 37.6 ± 2.3 μW mK⁻² when the content of SWCNTs is 0.8 mg. This value is one of the largest values among the reported PPy based composites fabricated by the chemical polymerization method. The results indicate that interfacial polymerization under a controlled temperature is a promising way to improve the TE performance of conducting polymer based composite materials.

PPy/SWCNTs composite films with high thermoelectric performance were prepared by chemical interfacial polymerization under a controlled low temperature.

Fiber-Based Energy Conversion Devices for Human-Body Energy Harvesting

Following the rapid development of lightweight and flexible smart electronic products, providing energy for these electronics has become a hot research topic. The human body produces considerable mechanical and thermal energy during daily activities, which could be used to power most wearable electronics. In this context, fiber-based energy conversion devices (FBECD) are proposed as candidates for effective conversion of human-body energy into electricity for powering wearable electronics. Herein, functional materials, fiber fabrication techniques, and device design strategies for different classes of FBECD based on piezoelectricity, triboelectricity, electrostaticity, and thermoelectricity are comprehensively reviewed. An overview of fiber-based self-powered systems and sensors according to their superior flexibility and cost-effectiveness is also presented. Finally, the challenges and opportunities in the field of fiber-based energy conversion are discussed.

Thermoelectric Flexible Silver Selenide Films: Compositional and Length Optimization

Silver selenide is considered as a promising room temperature thermoelectric material due to its excellent performance and high abundance. However, the silver selenide-based flexible film is still behind in thermoelectric performance compared with its bulk counterpart. In this work, the composition of paper-supported silver selenide film was successfully modulated through changing reactant ratio and annealing treatment. In consequence, the power factor value of 2450.9 ± 364.4 μW/(mK²) at 303 K, which is close to that of state-of-the-art bulk Ag₂Se has been achieved. Moreover, a thermoelectric device was fabricated after optimizing the length of annealed silver selenide film via numerical simulation. At temperature difference of 25 K, the maximum power density of this device reaches 5.80 W/m², which is superior to that of previous film thermoelectric devices. Theoretically and experimentally, this work provides an effective way to achieve silver-selenide-based flexible thermoelectric film and device with high performance.

•

A remarkably improved power factor is achieved by annealing treatment

•

Optimal length of Ag-rich Ag₂Se film is obtained via a numerical simulation

•

A high output power density at temperature difference of 25 K is realized

Flexible Thermoelectric Materials and Generators: Challenges and Innovations

The urgent need for ecofriendly, stable, long-lifetime power sources is driving the booming market for miniaturized and integrated electronics, including wearable and medical implantable devices. Flexible thermoelectric materials and devices are receiving increasing attention, due to their capability to convert heat into electricity directly by conformably attaching them onto heat sources. Polymer-based flexible thermoelectric materials are particularly fascinating because of their intrinsic flexibility, affordability, and low toxicity. There are other promising alternatives including inorganic-based flexible thermoelectrics that have high energy-conversion efficiency, large power output, and stability at relatively high temperature. Herein, the state-of-the-art in the development of flexible thermoelectric materials and devices is summarized, including exploring the fundamentals behind the performance of flexible thermoelectric materials and devices by relating materials chemistry and physics to properties. By taking insights from carrier and phonon transport, the limitations of high-performance flexible thermoelectric materials and the underlying mechanisms associated with each optimization strategy are highlighted. Finally, the remaining challenges in flexible thermoelectric materials are discussed in conclusion, and suggestions and a framework to guide future development are provided, which may pave the way for a bright future for flexible thermoelectric devices in the energy market.