Electrical switching between exciton dissociation to exciton funneling in MoSe2/WS2 heterostructure

Interlayer excitons in MoS2/CSiH2/WS2heterostructures: the role of the Janus intermediate layer

The introduction of intermediate hexagonal boron nitride (hBN) between the bilayer transition metal dichalcogenide (TMD) heterostructures has been considered an efficient approach to manipulate the interlayer excitations. However, the hBN intercalation primarily serves as a spacer to increase the interlayer distance and alter the screening, without producing a significant band offset shift. Here, we use Janus monolayer CSiH2, possessing a prominent out-of-plane intrinsic dipole moment and large enough band gap, as an intercalation to build trilayer MoS2/CSiH2/WS2heterostructures. Our calculated results by means of many-body perturbation theory reveal that the band alignment characteristics and the band gaps are dramatically altered in the presence of the CSiH2monolayer, due to the large potential drop across the interface of bilayer TMDs. By solving the Bethe-Salpeter equation, we observe the static dipole moment of the interlayer excitons (IXs) can be reversed through tuning the stacking sequence of CSiH2. More importantly, the radiative lifetime of IX has been substantially prolonged in MoS2/CSiH2/WS2, several orders of magnitude longer than that of bilayer MoS2/WS2, and varies between 10-9-10-5s at 0 K with different stacking sequence of CSiH2. Our explorations open the feasibility of simultaneously engineering the band alignment and the dipole moment of the dipolar IXs in TMD van der Waals heterostructures, through the introduction of Janus intercalation.

Large-Area Growth of High-Optical-Quality MoSe2/hBN Heterostructures with Tunable Charge Carrier Concentration

Van der Waals heterostructures open up vast possibilities for applications in optoelectronics, especially since it was recognized that the optical properties of transition-metal dichalcogenides (TMDC) can be enhanced by adjacent hBN layers. However, although many micrometer-sized structures have been fabricated, the bottleneck for applications remains the lack of large-area structures with electrically tunable photoluminescence emission. In this study, we demonstrate the electrical charge carrier tuning for large-area epitaxial MoSe2 grown directly on epitaxial hBN. The structure is produced in a multistep procedure involving Metalorganic Vapor Phase Epitaxy (MOVPE) growth of large-area hBN, a wet transfer of hBN onto a SiO2/Si substrate, and the subsequent Molecular Beam Epitaxy (MBE) growth of monolayer MoSe2. The electrically induced change of the carrier concentration is deduced from the evolution of well-resolved charged and neutral exciton intensities. Our findings show that it is feasible to grow large-area, electrically addressable, high-optical-quality van der Waals heterostructures.

Synthesis, Modulation, and Application of Two-Dimensional TMD Heterostructures

Two-dimensional (2D) transition metal dichalcogenide (TMD) heterostructures have attracted a lot of attention due to their rich material diversity and stack geometry, precise controllability of structure and properties, and potential practical applications. These heterostructures not only overcome the inherent limitations of individual materials but also enable the realization of new properties through appropriate combinations, establishing a platform to explore new physical and chemical properties at micro-nano-pico scales. In this review, we systematically summarize the latest research progress in the synthesis, modulation, and application of 2D TMD heterostructures. We first introduce the latest techniques for fabricating 2D TMD heterostructures, examining the rationale, mechanisms, advantages, and disadvantages of each strategy. Furthermore, we emphasize the importance of characteristic modulation in 2D TMD heterostructures and discuss some approaches to achieve novel functionalities. Then, we summarize the representative applications of 2D TMD heterostructures. Finally, we highlight the challenges and future perspectives in the synthesis and device fabrication of 2D TMD heterostructures and provide some feasible solutions.

Twist angle-dependent interlayer hybridized exciton lifetimes in van der Waals heterostructures

The interlayer twist angle has a direct effect on exciton lifetimes in van der Waals heterostructures. At small angles, the interlayer and intralayer excitons in MoSe2/WS2 heterostructures are hybridized, resulting in hybridized excitons with long lifetimes and strong resonance. However, the study of twist-angle modulation of hybridized exciton lifetimes is still insufficient, leading to an unclear understanding of the mechanism through which the twist angle between layers influences the lifetime of hybridized excitons. Here, we observed the formation of hybridized excitons by constructing MoSe2/WS2 heterostructures with different twist angles. The exciton lifetime is found to increase from 0.5 ns to 3.3 ns when the twist angle is reduced from 12° to 1°. This work provides a new perspective on the modulation of the exciton lifetime, enabling further exploration in improving the efficiency of optoelectronic devices.

Electrically tunable non-radiative lifetime in WS2/WSe2 heterostructures

Van der Waals heterostructures based on transition metal dichalcogenides (TMDs) have emerged as excellent candidates for next-generation optoelectronics and valleytronics, due to their fascinating physical properties. The understanding and active control of the relaxation dynamics of heterostructures play a crucial role in device design and optimization. Here, we investigate the back-gate modulation of exciton dynamics in a WS2/WSe2 heterostructure by combining time-resolved photoluminescence (TRPL) and transient absorption spectroscopy (TAS) at cryogenic temperatures. We find that the non-radiative relaxation lifetimes of photocarriers in heterostructures can be electrically controlled for samples with different twist-angles, whereas such lifetime tuning is not present in standalone monolayers. We attribute such an observation to doping-controlled competition between interlayer and intralayer recombination pathways in high-quality WS2/WSe2 samples. The simultaneous measurement of TRPL and TAS lifetimes within the same sample provides additional insight into the influence of coexisting excitons and background carriers on the photo-response, and points to the potential of tailoring light-matter interactions in TMD heterostructures.

Enhance Carrier Diffusion of Monolayer MoSe2 by Interface Engineering

Two-dimensional materials hold great potentials for beyond-CMOS (complementary metal-oxide-semiconductor) electronical and optoelectrical applications, and the development of field effect transistors (FET) with excellent performance using such materials is of particular interest. How to improve the performance of devices thus becomes an urgent issue. The performance of FETs depends greatly on the intrinsic electrical properties of the channel materials, meanwhile the device interface quality, such as extrinsic scattering of charged impurities, charge traps, and substrate surface roughness have a great influence on the performance. In this paper, the impact of the interface quality on the carrier diffusion behaviors of monolayer (ML) MoSe2 has been investigated by using an in situ ultrafast laser technique to avoid the surface contamination during device fabrication process. Two types of self-assembled monolayers (SAMs) are introduced to modify the gate dielectric surface through an interface engineering approach to obtain chemical-stable interfaces. The results showed that the transport properties of ML MoSe2 were enhanced after interface engineering, for example, the carrier mobility of ML MoSe2 was improved from ∼59.4 to ∼166.5 cm2 V-1 s-1 after the SAM modification. Meanwhile, the photocarrier dynamics of ML MoSe2 before and after interfacial engineering were also carefully studied. Our studies provide a feasible method for improving the carrier diffusion behaviors of such materials, and making them suited for application in future integrated circuit.

Asymmetric contact-induced selective doping of CVD-grown bilayer WS2 and its application in high-performance photodetection with an ultralow dark current

Two-dimensional (2D) transition metal dichalcogenides (TMDs) are excellent candidates for high-performance optoelectronics due to their high carrier mobility, air stability and strong optical absorption. However, photodetectors made with monolayer TMDs often exhibit a high dark current, and thus, there is a scope for further improvement. Herein, we developed a 2D bilayer tungsten disulfide (WS2) based photodetector (PD) with asymmetric contacts that exhibits an exceptionally low dark current and high specific detectivity. High-quality and large-area monolayer and bilayer WS2 flakes were synthesized using a thermal chemical vapor deposition system. Compared to conventional symmetric contact electrodes, utilizing metal electrodes with higher and lower work functions relative to bilayer WS2 aids in achieving asymmetric lateral doping in the WS2 flakes. This doping asymmetry was confirmed through the photoluminescence spectral profile and Raman mapping analysis. With the asymmetric contacts on bilayer WS2, we find evidence of selective doping of electrons and holes near the Ti and Au contacts, respectively, while the WS2 region away from the contacts remains intrinsic. When compared with the symmetric contact case, the dark current in the WS2 PD with asymmetric (Au, Ti) contact decreases by an order of magnitude under reverse bias with a concomitant increase in the photocurrent, resulting in an improved on/off ratio of ∼105 and overall improved device performance under identical illumination conditions. We explained this improved performance based on the energy band alignment showing a unidirectional charge flow under light illumination. Our results indicate that the planar device structure and compatibility with current nanofabrication technologies can facilitate its integration into advanced chips for futuristic low-power optoelectronic and nanophotonic applications.

Charge Trapping in Semiconductor Photocatalysts: A Time- and Space-Domain Perspective

Harnessing solar energy to produce value-added fuels and chemicals through photocatalysis techniques holds promise for establishing a sustainable and environmentally friendly energy economy. The intricate dynamics of photogenerated charge carriers lies at the core of the photocatalysis. The balance between charge trapping and band-edge recombination has a crucial influence on the activity of semiconductor photocatalysts. Consequently, the regulation of traps in photocatalysts becomes the key to optimizing their activities. Nevertheless, our comprehension of charge trapping, compared to that of well-studied charge recombination, remains somewhat limited. This limitation stems from the inherently heterogeneous nature of traps at both temporal and spatial scales, which renders the characterization of charge trapping a formidable challenge. Fortunately, recent advancements in both time-resolved spectroscopy and space-resolved microscopy have paved the way for considerable progress in the investigation and manipulation of charge trapping. In this Perspective, we focus on charge trapping in photocatalysts with the aim of establishing a direct link to their photocatalytic activities. To achieve this, we begin by elucidating the principles of advanced time-resolved spectroscopic techniques such as femtosecond time-resolved transient absorption spectroscopy and space-resolved microscopic methods, such as single-molecule fluorescence microscopy and surface photovoltage microscopy. Additionally, we provide an overview of noteworthy research endeavors dedicated to probing charge trapping using time- and space-resolved techniques. Our attention is then directed toward recent achievements in the manipulation of charge trapping in photocatalysts through defect engineering. Finally, we summarize this Perspective and discuss the future challenges and opportunities that lie ahead in the field.

Energy transfer driven brightening of MoS2 by ultrafast polariton relaxation in microcavity MoS2/hBN/WS2 heterostructures

Energy transfer is a ubiquitous phenomenon that delivers energy from a blue-shifted emitter to a red-shifted absorber, facilitating wide photonic applications. Two-dimensional (2D) semiconductors provide unique opportunities for exploring novel energy transfer mechanisms in the atomic-scale limit. Herein, we have designed a planar optical microcavity-confined MoS2/hBN/WS2 heterojunction, which realizes the strong coupling among donor exciton, acceptor exciton, and cavity photon mode. This configuration demonstrates an unconventional energy transfer via polariton relaxation, brightening MoS2 with a record-high enhancement factor of ~440, i.e., two-order-of-magnitude higher than the data reported to date. The polariton relaxation features a short characteristic time of ~1.3 ps, resulting from the significantly enhanced intra- and inter-branch exciton-exciton scattering. The polariton relaxation dynamics is associated with Rabi energies in a phase diagram by combining experimental and theoretical results. This study opens a new direction of microcavity 2D semiconductor heterojunctions for high-brightness polaritonic light sources and ultrafast polariton carrier dynamics.

Bright and Dark Quadrupolar Excitons in the WSe_{2}/MoSe_{2}/WSe_{2} Heterotrilayer

Transition metal dichalcogenide heterostructures have been extensively studied as a platform for investigating exciton physics. While heterobilayers such as WSe_{2}/MoSe_{2} have received significant attention, there has been comparatively less research on heterotrilayers, which may offer new excitonic species and phases, as well as unique physical properties. In this Letter, we present theoretical and experimental investigations on the emission properties of quadrupolar excitons (QXs), a newly predicted type of exciton, in a WSe_{2}/MoSe_{2}/WSe_{2} heterotrilayer device. Our findings reveal that the optical brightness or darkness of QXs is determined by horizontal mirror symmetry and valley and spin selection rules. Additionally, the emission intensity and energy of both bright and dark QXs can be adjusted by applying an out-of-plane electric field, due to changes in hole distribution and the Stark effect. These results not only provide experimental evidence for the existence of QXs in heterotrilayers but also uncover their novel properties, which have the potential to drive the development of new exciton-based applications.

Latest Innovations in 2D Flexible Nanoelectronics

2D materials with dangling-bond-free surfaces and atomically thin layers have been shown to be capable of being incorporated into flexible electronic devices. The electronic and optical properties of 2D materials can be tuned or controlled in other ways by using the intriguing strain engineering method. The latest and encouraging techniques in regard to creating flexible 2D nanoelectronics are condensed in this review. These techniques have the potential to be used in a wider range of applications in the near and long term. It is possible to use ultrathin 2D materials (graphene, BP, WTe2 , VSe2 etc.) and 2D transition metal dichalcogenides (2D TMDs) in order to enable the electrical behavior of the devices to be studied. A category of materials is produced on smaller scales by exfoliating bulk materials, whereas chemical vapor deposition (CVD) and epitaxial growth are employed on larger scales. This overview highlights two distinct requirements, which include from a single semiconductor or with van der Waals heterostructures of various nanomaterials. They include where strain must be avoided and where it is required, such as solutions to produce strain-insensitive devices, and such as pressure-sensitive outcomes, respectively. Finally, points-of-view about the current difficulties and possibilities in regard to using 2D materials in flexible electronics are provided.

Revisiting the Hetero-Interface of Electrolyte/2D Materials in an Electric Double Layer Device

Electric double layer (EDL) devices based on 2D materials have made great achievements for versatile electronic and opto-electronic applications; however, the ion dynamics and electric field distribution of the EDL at the electrolyte/2D material interface and their influence on the physical properties of 2D materials have not been clearly clarified. In this work, by using Kelvin probe force microscope and steady/transient optical techniques, the character of the EDL and its influence on the optical properties of monolayer transition metal dichalcogenides (TMDs) are probed. The potential drop, unscreened EDL potential distribution, and accumulated carriers at the electrolyte/TMD interface are revealed, which can be explained by nonlinear Thomas-Fermi theory. By monitoring the potential distribution along the channel, the evolution of the electric field-induced lateral junction in the TMD EDL transistor is accessed, giving rise to the better exploration of EDL device physics. More importantly, EDL gate-dependent carrier recombination and exciton-exciton annihilation in monolayer TMDs on lithium-ion solid state electrolyte (Li2 Al2 SiP2 TiO13 ) are evaluated for the first time, benefiting from the understanding of the interaction between ions, carriers, and excitons. The work will deepen the understanding of the EDL for the exploitation of functional device applications.

Efficient Exciton Dissociation through the Edge Interfacial State in Metal Halide Perovskite-Based Photocatalysts

Metal halide perovskites (MHPs) with superior optoelectronic properties have recently been actively pursued as catalysts in heterogeneous photocatalysis. Dissociating excitons into charge carriers holds the key to enhancing the photocatalytic performance of MHP-based photocatalysts, especially for those with strong quantum-confinement effects. However, attaining efficient exciton dissociation has been rather challenging. Herein, we propose a novel concept that the edge interfacial state can trigger anisotropic electron transfer to promote exciton dissociation. By taking Cs₄PbBr₆/TiO₂ mesocrystal heterojunction as a proof-of-concept, we demonstrate that the unique interfacial state at the edge of the system is generated by the defect-mediated chemical interaction and acts as a trap state, which brings on a directionally favored electron transfer from the center to edge regions, thereby significantly enhancing the desired exciton dissociation. Consequently, such a system achieves an excellent performance in photocatalytic CO₂ reduction. This paradigmatic work sheds light on the excitonic aspects for rational design of advanced photocatalysts toward high performance.

Efficient modulation of thermal transport in two-dimensional materials for thermal management in device applications

With the development of chip technology, the density of transistors on integrated circuits is increasing and the size is gradually shrinking to the micro-/nanoscale, with the consequent problem of heat dissipation on chips becoming increasingly serious. For device applications, efficient heat dissipation and thermal management play a key role in ensuring device operation reliability. In this review, we summarize the thermal management applications based on 2D materials from both theoretical and experimental perspectives. The regulation approaches of thermal transport can be divided into two main types: intrinsic structure engineering (acting on the intrinsic structure) and non-structure engineering (applying external fields). On one hand, the thermal transport properties of 2D materials can be modulated by defects and disorders, size effect (including length, width, and the number of layers), heterostructures, structure regulation, doping, alloy, functionalizing, and isotope purity. On the other hand, strain engineering, electric field, and substrate can also modulate thermal transport efficiently without changing the intrinsic structure of the materials. Furthermore, we propose a perspective on the topic of using magnetism and light field to modulate the thermal transport properties of 2D materials. In short, we comprehensively review the existing thermal management modulation applications as well as the latest research progress, and conclude with a discussion and perspective on the applications of 2D materials in thermal management, which will be of great significance to the development of next-generation nanoelectronic devices.

Raman Fingerprint of Interlayer Coupling in 2D TMDCs

Vertical stacking of two-dimensional (2D) homo- and heterostructures are intriguing research objects, as they are essential for fundamental studies and a key towards 2D device applications. It is paramount to understand the interlayer coupling in 2D materials and to find a fast yet precise characteristic signature. In this work, we report on a Raman fingerprint of interlayer coupling in 2D transition metal dichalcogenides (TMDCs). We observed that the out-of-plane B2g vibrational mode is absent when two monolayers form a vertical stack yet remain uncoupled but emerges after strong coupling. Using systematic Raman, photoluminescence (PL), and atomic force microscopy (AFM) studies of WSe2/WSe2 homo-bilayers and MoSe2/WSe2 hetero-bilayers, we conclude that the B2g vibrational mode is a distinct Raman fingerprint of interlayer coupling in 2D TMDCs. Our results propose an easy, fast, precise, and reliable measure to evaluate the interlayer coupling in 2D TMDCs.

Strain-Modulated Interlayer Charge and Energy Transfers in MoS2/WS2 Heterobilayer

Excitonic properties in 2D heterobilayers are closely governed by charge transfer (CT) and excitonic energy transfer (ET) at van der Waals interfaces. Various means have been employed to modulate the interlayer CT and ET, including electrical gating and modifying interlayer spacing, but with limited extent in their controllability. Here, we report a novel method to modulate these transfers in the MoS₂/WS₂ heterobilayer by applying compressive strain under hydrostatic pressure. Raman and photoluminescence measurements, combined with density functional theory calculations, show pressure-enhanced interlayer interaction of the heterobilayer. Heterobilayer-to-monolayer photoluminescence intensity ratio (η) of WS₂ decreases by five times up to ≈4 GPa, suggesting enhanced ET, whereas it increases by an order of magnitude at higher pressures and reaches almost unity. Theoretical calculations show that orbital switching and charge transfers in the heterobilayer's hybridized conduction band are responsible for the non-monotonic modulation of the transfers. Our findings provide a compelling approach toward effective mechanical control of CT and ET in 2D excitonic devices.

Microwave Facilitated Covalent Organic Framework/Transition Metal Dichalcogenide Heterostructures

Organic/inorganic heterostructures present a versatile platform for creating materials with new functionalities and hybrid properties. In particular, junctions between two dimensional materials have demonstrated utility in next generation electronic, optical, and optoelectronic devices. This work pioneers a microwave facilitated synthesis process to readily incorporate few-layer covalent organic framework (COF) films onto monolayer transition metal dichalcogenides (TMDC). Preferential microwave excitation of the monolayer TMDC flakes result in selective attachment of COFs onto the van der Waals surface with film thicknesses between 1 and 4 nm. The flexible process is extended to multiple TMDCs (MoS₂, MoSe₂, MoSSe) and several well-known COFs (TAPA-PDA COF, TPT-TFA-COF, and COF-5). Photoluminescence studies reveal a power-dependent defect formation in the TMDC layer, which facilitates electronic coupling between the materials at higher TMDC defect densities. This coupling results in a shift in the A-exciton peak location of MoSe₂, with a red or blue shift of 50 or 19 meV, respectively, depending upon the electron donating character of the few-layer COF films. Moreover, optoelectronic devices fabricated from the COF-5/TMDC heterostructure present an opportunity to tune the PL intensity and control the interaction dynamics within inorganic/organic heterostructures.

P-Type 2D Semiconductors for Future Electronics

2D semiconductors represent one of the best candidates to extend Moore's law for their superiorities, such as keeping high carrier mobility and remarkable gate-control capability at atomic thickness. Complementary transistors and van der Waals junctions are critical in realizing 2D semiconductors-based integrated circuits suitable for future electronics. N-type 2D semiconductors have been reported predominantly for the strong electron doping caused by interfacial charge impurities and internal structural defects. By contrast, superior and reliable p-type 2D semiconductors with holes as majority carriers are still scarce. Not only that, but some critical issues have not been adequately addressed, including their controlled synthesis in wafer size and high quality, defect and carrier modulation, optimization of interface and contact, and application in high-speed and low-power integrated devices. Here the material toolkit, synthesis strategies, device basics, and digital electronics closely related to p-type 2D semiconductors are reviewed. Their opportunities, challenges, and prospects for future electronic applications are also discussed, which would be promising or even shining in the post-Moore era.

Near-UV Phototransistors Based on an All-Inorganic Lead-Free Cs3Cu2I5/CuTCNQ Hierarchical Heterostructure

With the rapid advances in metal halide perovskite optoelectronics, eliminating toxic lead from perovskites has been an urgent demand. However, state-of-the-art lead-free perovskite photodetectors are still challenged with issues of low photoresponse, poor stability, etc. Here, all-inorganic lead-free perovskite (Cs₃Cu₂I₅) single crystals that possess good stability under air exposure are synthesized via a facile solid reaction method. Meanwhile, a higher photoluminescence quantum yield of 95.2% and a prolonged carrier lifetime of 1.127 μs are obtained by further optimizing the synthesis. Benefiting from the polyporous surface and hollow structure of Cu-7,7,8,8-tetracyanoquinodimethane (CuTCNQ) microtubes, more Cs₃Cu₂I₅ nanocrystals can adhere on the innershell and outershell of CuTCNQ-15 microtubes. This unique structure contributes to the improved efficiency of utilizing incident light and promotes charge carrier generation and transportation. As a result, the hierarchical CuTCNQ/Cs₃Cu₂I₅ (hollow microtube/nanocrystal) heterostructure phototransistor exhibits a high responsivity of 88.36 A W^-1 and a large detectivity of 1.66 × 10¹² Jones. The proposed lead-free perovskites and mixed-dimensional heterojunctions are promising for sensitive light detection.

A two-dimensional α-As/α-AsP van der Waals heterostructure for photovoltaic applications

On the basis of first-principles calculations, we constructed a two-dimensional (2D) α-As/α-AsP van der Waals heterostructure (vdWH) to study the structural stability, and electronic and optical properties. Our results show that the 2D α-As/α-AsP vdWH displays indirect semiconductor characteristics with a band gap of 0.86 eV. Furthermore, it exhibits anisotropic properties and a high light absorption coefficient of up to 10⁶ cm^-1 in the ultraviolet region. Our predicted photoelectric conversion efficiency (PCE) of the 2D α-As/α-AsP vdWH reaches 21.30%, which is higher than those of blue-AsP/CdSe (13%), GeSe/AsP (16%), and As/tetracyanonaphtho-quinodimethane (TCNNQ) (20%). By applying an in-plane strain in the range from -6% to 6%, the band structure of the 2D α-As/α-AsP vdWH can be effectively tuned. In particular, under a uniaxial strain of -2% along the x-axis (2% along the y-axis), a transition from indirect to direct in the band structure occurs, while when applying a biaxial strain of -4% a transition from a semiconductor to a metal can be realized. These results indicate that the 2D α-As/α-AsP vdWH has potential applications in optoelectronic devices and solar cells.

MoSe2-WS2 Nanostructure for an Efficient Hydrogen Generation under White Light LED Irradiation

In this work, MoSe2-WS2 nanocomposites consisting of WS2 nanoparticles covered with few MoSe2 nanosheets were successfully developed via an easy hydrothermal synthesis method. Their nanostructure and photocatalytic hydrogen evolution (PHE) performance are investigated by a series of characterization techniques. The PHE rate of MoSe2-WS2 is evaluated under the white light LED irradiation. Under LED illumination, the highest PHE of MoSe2-WS2 nanocomposite is 1600.2 µmol g-1 h-1. When compared with pristine WS2, the MoSe2-WS2 nanostructures demonstrated improved PHE rate, which is 10-fold higher than that of the pristine one. This work suggests that MoSe2-WS2 could be a promising photocatalyst candidate and might stimulate the further studies of other layered materials for energy conversion and storage.

Dipole moment and pressure dependent interlayer excitons in MoSSe/WSSe heterostructures

The broken mirror symmetry of two-dimensional (2D) Janus materials brings novel quantum properties and various application prospects. Particularly, when stacking into heterostructures, their intrinsic dipole moments and large band offsets are very favorable to the photoexcited properties concerning electron-hole pairs, i.e., excitons. However, the effect of the intrinsic dipole moments on the interlayer excitons in the heterostructures composed of 2D Janus materials is still unclear. Here we use the GW/BSE methods to explore the effect of the intrinsic dipole moments on the interlayer excitons via varying the stacking configuration of MoSSe/WSSe heterostructures. Surprisingly, our results reveal that the parallel-arranged intrinsic dipole moments enhance the interlayer coupling in the heterostructures, and hence make the lowest interlayer exciton have an intensity comparable to the bright excitons while accompanied by a large binding energy and a radiative lifetime as long as 10^-7 s at 300 K, though it is almost a spin-forbidden process, and with the out-of-plane light polarization, long lifetime interlayer excitons are observed under the effect of selection rules. More intriguingly, we found that the photoexcited properties of the interlayer excitons considering the momentum in the stacking configuration with parallel-arranged intrinsic dipole moments are greatly tunable through hydrostatic pressure. These explorations provide a basic perspective for optoelectronic applications by means of engineering the intrinsic dipole moments in Janus heterostructures.

Robust Interlayer Exciton in WS2/MoSe2 van der Waals Heterostructure under High Pressure

The van der Waals (vdW) heterostructures have rich functions and intriguing physical properties, which has attracted wide attention. Effective control of excitons in vdW heterostructures is still urgent for fundamental research and realistic applications. Here, we successfully achieved quantitative tuning of the intralayer exciton of monolayers and observed the transition from intralayer excitons to interlayer excitons in WS₂/MoSe₂ heterostructures, via hydrostatic pressure. The energy of interlayer excitons is in a "locked" or "superstable" state, which is not sensitive to pressure. The first-principles calculation reveals the stronger interlayer interaction which leads to enhanced interlayer exciton behavior in WS₂/MoSe₂ heterostructures under external pressure and reveals the robust peak of interlayer excitons. This work provides an effective strategy to study the interlayer interaction in vdW heterostructures and reveals the enhanced interlayer excitons in WS₂/MoSe₂, which could be of great importance for the material and device design in various similar quantum systems.

Charge-order-enhanced capacitance in semiconductor moiré superlattices

Van der Waals moiré materials have emerged as a highly controllable platform to study electronic correlation phenomena^1-17. Robust correlated insulating states have recently been discovered at both integer and fractional filling factors of semiconductor moiré systems^10-17. In this study we explored the thermodynamic properties of these states by measuring the gate capacitance of MoSe₂/WS₂ moiré superlattices. We observed a series of incompressible states for filling factors 0-8 and anomalously large capacitance in the intervening compressible regions. The anomalously large capacitance, which was nearly 60% above the device's geometrical capacitance, was most pronounced at small filling factors, below the melting temperature of the charge-ordered states, and for small sample-gate separation. It is a manifestation of the device-geometry-dependent Coulomb interaction between electrons and phase mixing of the charge-ordered states. Based on these results, we were able to extract the thermodynamic gap of the correlated insulating states and the device's electronic entropy and specific heat capacity. Our findings establish capacitance as a powerful probe of the correlated states in semiconductor moiré systems and demonstrate control of these states via sample-gate coupling.

Manipulation of Valley Pseudospin by Selective Spin Injection in Chiral Two-Dimensional Perovskite/Monolayer Transition Metal Dichalcogenide Heterostructures

Monolayer two-dimensional (2D) transition metal dichalcogenides (TMDs) have attracted great interest in spintronics and valleytronics due to the spin-valley locking effect. To efficiently control and manipulate the valley pseudospin is of paramount importance for valley-based electronics and optoelectronics. A variety of strategies have been developed to address the valley pseudospin including optical, electrical, and magnetic methods; nonetheless, they involve either below liquid-nitrogen temperature or an external magnetic field, which increases the cost and complexity of the devices. Here, we report a straightforward way to manipulate valley polarization in monolayer TMDs via selective spin injection in chiral 2D perovskite/monolayer TMD (e.g., MoS₂ and WSe₂) van der Waals heterostructures without requiring an external magnetic field or specially designed device structures. We show the dangling-bond-free vdW interface can allow an impressive average spin injection efficiency of 78% to produce persistent valley polarization in monolayer MoS₂ (WSe₂) over 10% from liquid-nitrogen temperature to above 200 K. We attribute the valley polarization of monolayer MoS₂ (WSe₂) to selective spin injection from chiral 2D perovskites, which can effectively introduce population imbalance between valleys in monolayer MoS₂ (WSe₂). Our findings provide an alternative strategy to manipulate the valley polarization in TMDs without requiring circularly polarized light excitation, below liquid-nitrogen temperature, or external magnetic field, and thus would promote the development of perovskite-based spintronic and valleytronic devices.