Scaling behavior of the quantum phase transition from a quantum-anomalous-Hall insulator to an axion insulator

Unique magnetic transition process demonstrating the effectiveness of bond percolation theory in a quantum magnet

Like the crystallization of water to ice, magnetic transition occurs at a critical temperature after the slowing down of dynamically fluctuating short-range correlated spins. Here, we report a unique type of magnetic transition characterized by a linear increase in the volume fraction of unconventional static short-range-ordered spin clusters, which triggered a transition into a long-range order at a threshold fraction perfectly matching the bond percolation theory in a new quantum antiferromagnet of pseudo-trigonal Cu4(OH)6Cl2. Static short-range order appeared in its Kagome lattice plane below ca. 20 K from a pool of coexisting spin liquid, linearly increasing its fraction to 0.492(8), then all Kagome spins transitioned into a stable two-dimensional spin order at TN = 5.5 K. Inspection on the magnetic interactions and quantum magnetism revealed an intrinsic link to the spin liquid material Herbertsmithite, ZnCu3(OH)6Cl2. The unconventional static nature of the short-range order was inferred to be due to a pinning effect by the strongly correlated coexisting spin liquids. This work presents a unique magnetic system to demonstrate a complete bond percolation process toward the critical transition. Meanwhile, the unconventionally developed magnetic order in this chemically clean system should shed new light on spin-liquid physics.

Conformity Experiment on Inelastic Scattering Exponent of Electrons in Two Dimensions

The quantum Hall (QH) effect is one of the most widely studied physical phenomenon in two dimensions. The plateau-plateau transition within this effect can be comprehensively described by the scaling theory, which encompasses three pivotal exponents: the critical exponent κ, the inelastic scattering exponent p, and the universal exponent γ. Prior studies have focused on measuring κ and estimating γ, assuming a constant p value of 2 across magnetic fields. Here, our work marks a significant advancement by measuring all three exponents within a single graphene device and a conventional two-dimensional electron system. This study uniquely determines p at low magnetic fields (weak localization region and well outside the QH regime) and high magnetic fields (in the vicinity of the QH regime). Employing a comprehensive analytical approach that includes weak localization, plateau-plateau transitions, and variable range hopping, we have directly determined κ, p, and γ. Our findings reveal a distinct variation in p, shifting from 1 in the low magnetic field regime to 2 in the QH regime in graphene.

Engineering Plateau Phase Transition in Quantum Anomalous Hall Multilayers

The plateau phase transition in quantum anomalous Hall (QAH) insulators corresponds to a quantum state wherein a single magnetic domain gives way to multiple domains and then reconverges back to a single magnetic domain. The layer structure of the sample provides an external knob for adjusting the Chern number C of the QAH insulators. Here, we employ molecular beam epitaxy to grow magnetic topological insulator multilayers and realize the magnetic field-driven plateau phase transition between two QAH states with odd Chern number change ΔC. We find that critical exponents extracted for the plateau phase transitions with ΔC = 1 and ΔC = 3 in QAH insulators are nearly identical. We construct a four-layer Chalker-Coddington network model to understand the consistent critical exponents for the plateau phase transitions with ΔC = 1 and ΔC = 3. This work will motivate further investigations into the critical behaviors of plateau phase transitions with different ΔC in QAH insulators.

Quantized anomalous Hall resistivity achieved in molecular beam epitaxy-grown MnBi2Te4 thin films

The intrinsic magnetic topological insulator MnBi2Te4 provides a feasible pathway to the high-temperature quantum anomalous Hall (QAH) effect as well as various novel topological quantum phases. Although quantized transport properties have been observed in exfoliated MnBi2Te4 thin flakes, it remains a big challenge to achieve molecular beam epitaxy (MBE)-grown MnBi2Te4 thin films even close to the quantized regime. In this work, we report the realization of quantized anomalous Hall resistivity in MBE-grown MnBi2Te4 thin films with the chemical potential tuned by both controlled in situ oxygen exposure and top gating. We find that elongated post-annealing obviously elevates the temperature to achieve quantization of the Hall resistivity, but also increases the residual longitudinal resistivity, indicating a picture of high-quality QAH puddles weakly coupled by tunnel barriers. These results help to clarify the puzzles in previous experimental studies on MnBi2Te4 and to find a way out of the big difficulty in obtaining MnBi2Te4 samples showing quantized transport properties.

3D Quantum Anomalous Hall Effect in Magnetic Topological Insulator Trilayers of Hundred-Nanometer Thickness

Magnetic topological states refer to a class of exotic phases in magnetic materials with the non-trivial topological property determined by magnetic spin configurations. An example of such states is the quantum anomalous Hall (QAH) state, which is a zero magnetic field manifestation of the quantum Hall effect. Current research in this direction focuses on QAH insulators with a thickness of less than 10 nm. Here, molecular beam epitaxy (MBE) is employed to synthesize magnetic TI trilayers with a thickness of up to ≈106 nm. It is found that these samples exhibit well-quantized Hall resistance and vanishing longitudinal resistance at zero magnetic field. By varying the magnetic dopants, gate voltages, temperature, and external magnetic fields, the properties of these thick QAH insulators are examined and the robustness of the 3D QAH effect is demonstrated. The realization of the well-quantized 3D QAH effect indicates that the nonchiral side surface states of the thick magnetic TI trilayers are gapped and thus do not affect the QAH quantization. The 3D QAH insulators of hundred-nanometer thickness provide a promising platform for the exploration of fundamental physics, including axion physics and image magnetic monopole, and the advancement of electronic and spintronic devices to circumvent Moore's law.

Growth and characterization of the magnetic topological insulator candidate Mn2Sb2Te5

We report a new member of topological insulator (TI) family i.e. Mn2Sb2Te5, which belongs to MnSb2Te4family and is a sister compound of Mn2Bi2Te5. An antiferromagnetic layer of (MnTe)2has been inserted between quintuple layers of Sb2Te3. The crystal structure and chemical composition of as grown Mn2Sb2Te5crystal is experimentally visualized by single crystal x-ray diffractometer and field emission scanning electron microscopy. The valence states of individual constituents i.e., Mn, Sb and Te are ascertained through x-ray photo electron spectroscopy. Different vibrational modes of Mn2Sb2Te5are elucidated through Raman spectroscopy. Temperature-dependent resistivityρ(T) of Mn2Sb2Te5resulted in metallic behavior of the same with an up-turn at below around 20 K. Further, the magneto-transportρ(T) vsHof the same exhibited negative magneto-resistance (MR) at low temperatures below 20 K and small positive at higher temperatures. The low Temperature -ve MR starts decreasing at higher fields. The magnetic moment as a function of temperature at 100 Oe and 1 kOe showed anti-ferromagnetism (AFM) like down turn cusps at around 20 K and 10 K. The isothermal magnetization showed AFM like loops with some embedded ferromagnetic/paramagnetic (PM) domains at 5 K and purely PM like at 100 K. The studied Mn2Sb2Te5clearly exhibited the characteristics of a magnetic TI.

Axion insulator state in hundred-nanometer-thick magnetic topological insulator sandwich heterostructures

An axion insulator is a three-dimensional (3D) topological insulator (TI), in which the bulk maintains the time-reversal symmetry or inversion symmetry but the surface states are gapped by surface magnetization. The axion insulator state has been observed in molecular beam epitaxy (MBE)-grown magnetically doped TI sandwiches and exfoliated intrinsic magnetic TI MnBi2Te4 flakes with an even number layer. All these samples have a thickness of ~ 10 nm, near the 2D-to-3D boundary. The coupling between the top and bottom surface states in thin samples may hinder the observation of quantized topological magnetoelectric response. Here, we employ MBE to synthesize magnetic TI sandwich heterostructures and find that the axion insulator state persists in a 3D sample with a thickness of ~ 106 nm. Our transport results show that the axion insulator state starts to emerge when the thickness of the middle undoped TI layer is greater than ~ 3 nm. The 3D hundred-nanometer-thick axion insulator provides a promising platform for the exploration of the topological magnetoelectric effect and other emergent magnetic topological states, such as the high-order TI phase.

Quantized resistance revealed at the criticality of the quantum anomalous Hall phase transitions

In multilayered magnetic topological insulator structures, magnetization reversal processes can drive topological phase transitions between quantum anomalous Hall, axion insulator, and normal insulator states. Here we report an examination of the critical behavior of two such transitions: the quantum anomalous Hall to normal insulator (QAH-NI), and quantum anomalous Hall to axion insulator (QAH-AXI) transitions. By introducing a new analysis protocol wherein temperature dependent variations in the magnetic coercivity are accounted for, the critical behavior of the QAH-NI and QAH-AXI transitions are evaluated over a wide range of temperature and magnetic field. Despite the uniqueness of these different transitions, quantized longitudinal resistance and Hall conductance are observed at criticality in both cases. Furthermore, critical exponents were extracted for QAH-AXI transitions occurring at magnetization reversals of two different magnetic layers. The observation of consistent critical exponents and resistances in each case, independent of the magnetic layer details, demonstrates critical behaviors in quantum anomalous Hall transitions to be of electronic rather than magnetic origin. Our finding offers a new avenue for studies of phase transition and criticality in QAH insulators.

Recent Progress in Proximity Coupling of Magnetism to Topological Insulators

Inducing long-range magnetic order in 3D topological insulators can gap the Dirac-like metallic surface states, leading to exotic new phases such as the quantum anomalous Hall effect or the axion insulator state. These magnetic topological phases can host robust, dissipationless charge and spin currents or unique magnetoelectric behavior, which can be exploited in low-energy electronics and spintronics applications. Although several different strategies have been successfully implemented to realize these states, to date these phenomena have been confined to temperatures below a few Kelvin. This review focuses on one strategy: inducing magnetic order in topological insulators by proximity of magnetic materials, which has the capability for room temperature operation, unlocking the potential of magnetic topological phases for applications. The unique advantages of this strategy, the important physical mechanisms facilitating magnetic proximity effect, and the recent progress to achieve, understand, and harness proximity-coupled magnetic order in topological insulators are discussed. Some emerging new phenomena and applications enabled by proximity coupling of magnetism and topological materials, such as skyrmions and the topological Hall effect, are also highlighted, and the authors conclude with an outlook on remaining challenges and opportunities in the field.

Critical Behavior and Universal Signature of an Axion Insulator State

Recently, the search for an axion insulator state in the ferromagnetic-3D topological insulator (TI) heterostructure and MnBi_{2}Te_{4} has attracted intense interest. However, its detection remains difficult in experiments. We systematically investigate the disorder-induced phase transition of the axion insulator state in a 3D TI with antiparallel magnetization alignment surfaces. It is found that there exists a 2D disorder-induced phase transition on the surfaces of the 3D TI which shares the same universality class with the quantum Hall plateau to plateau transition. Then, we provide a phenomenological theory which maps the random mass Dirac Hamiltonian of the axion insulator state into the Chalker-Coddington network model. Therefore, we propose probing the axion insulator state by investigating the universal signature of such a phase transition in the ferromagnetic-3D TI heterostructure and MnBi_{2}Te_{4}. Our findings not only show a global phase diagram of the axion insulator state, but also stimulate further experiments to probe it.