Preventing post-surgical cardiac adhesions with a catechol-functionalized oxime hydrogel

Immunomodulatory bioadhesive technologies

Bioadhesives have found significant use in medicine and engineering, particularly for wound care, tissue engineering, and surgical applications. Compared to traditional wound closure methods such as sutures and staples, bioadhesives offer advantages, including reduced tissue damage, enhanced healing, and ease of implementation. Recent progress highlights the synergy of bioadhesives and immunoengineering strategies, leading to immunomodulatory bioadhesives capable of modulating immune responses at local sites where bioadhesives are applied. They foster favorable therapeutic outcomes such as reduced inflammation in wounds and implants or enhanced local immune responses to improve cancer therapy efficacy. The dual functionalities of bioadhesion and immunomodulation benefit wound management, tissue regeneration, implantable medical devices, and post-surgical cancer management. This review delves into the interplay between bioadhesion and immunomodulation, highlighting the mechanobiological coupling involved. Key areas of focus include the modulation of immune responses through chemical and physical strategies, as well as the application of these bioadhesives in wound healing and cancer treatment. Discussed are remaining challenges such as achieving long-term stability and effectiveness, necessitating further research to fully harness the clinical potential of immunomodulatory bioadhesives.

Interfacial Asymmetrically Coordinated Zn-MOF for High-Efficiency Electrosynthetic Oxime

Oximes are important intermediates for various chemicals synthesis such as pharmaceuticals, among which one vital precursor for producing neurological disease, antimicrobial and anticancer agents is piperidone oxime (PDO). Compared with conventional thermocatalytic method, it's more attractive to synthesize PDO via green electrocatalytic technology especially utilizing waste nitrogen oxides gas as nitrogen source. However, there are great challenges in catalyst design for high-efficiency electrosynthetic oxime due to the low electron transport rate and multiple competing reactions. Herein, we propose an interfacial coordination strategy based on metal-organic frameworks (MOF) electrocatalyst for the first time to promote oxime electrosynthesis, by building Zn-O bridges between graphite felt (GF) and zeolitic imidazolate framework (ZIF-7/CGF). Specially, ZIF-7/CGF delivers a Faraday efficiency (FE) of 75.9 % with yield up to 73.1 % for 1-methyl-4-piperidone oxime, which is far superior to the catalyst without Zn-O bridges (a FE of 10.7 % and yield of 10.3 %). In-depth mechanism study shows that the introducing Zn-O bridges can promote the electron transfer and induce Zn sites transforming into distorted tetrahedron (Zn-N3O) coordination mode, which benefits for intermediates adsorption and conversion. The developed strategy presents wide universalities towards various oximes electrosynthesis and adapts to other MOF materials (ZIF-8, ZIF-4). This work provides new insights for electrosynthetic organic chemicals and upgrading nitrogen cycle through rational design surficial coordinated electrocatalysts.

A Dual-Layer Hydrogel Barrier Integrating Bio-Adhesive and Anti-Adhesive Properties Prevents Postoperative Abdominal Adhesions

Postoperative abdominal adhesions are a common and painful complication after surgery, leading to high healthcare costs and diminished quality of life. This report presents a novel bilayer hydrogel barrier featuring an inner adhesive layer and an outer antiadhesive layer. The inner adhesive layer hydrogel (PT) is prepared by mixing polyethyleneimine (PEI) and thioctic acid (TA). The outer layer (HP) hydrogel is fabricated by the conjugation reaction of thermoresponsive zwitterionic hyaluronic acid, phenylboronic acid, and epigallocatechin gallate complex and polyvinyl alcohol based on dynamic boronic ester bond. The PEI/TA layer enhances attachment to moist tissue surfaces in vivo, and the anti-adhesive layer HP hydrogel promotes biocompatibility and anti-inflammation while minimizing protein adsorption and improving mechanical stability. The bilayer hydrogel (HPPT) exhibited rapid gelation, robust adhesion in dynamic and moist environments, superior viscoelastic properties and cellular biocompatibility. A mouse-cecum abdominal wall adhesion model is utilized to evaluate efficacy, and the HPPT hydrogel shows local retention, anti-inflammatory effect, and inhibits fibrin deposition while minimizing adhesion formation. These findings highlight the innovative structural and functional properties of the HPPT hydrogel, positioning it as a promising therapeutic barrier in peritoneal surgery aimed at reducing postoperative adhesions and enhancing surgical outcomes.

Bioelectronics hydrogels for implantable cardiac and brain disease medical treatment application

Hydrogel-based bioelectronic systems offer significant benefits for point-of-care diagnosis, treatment of cardiac and cerebral disease, surgical procedures, and other medical applications, ushering in a new era of advancements in medical technology. Progress in hydrogel-based bioelectronics has advanced from basic instrument and sensing capabilities to sophisticated multimodal perceptions and feedback systems. Addressing challenges related to immune responses and inflammation regulation after implantation, physiological dynamic mechanism, biological toxicology as well as device size, power consumption, stability, and signal conversion is crucial for the practical implementation of hydrogel-based bioelectronics in medical implants. Therefore, further exploration of hydrogel-based bioelectronics is imperative, and a comprehensive review is necessary to steer the development of these technologies for use in implantable therapies for cardiac and brain/neural conditions. In this review, a concise overview is provided on the fundamental principles underlying ionic electronic and ionic bioelectronic mechanisms. Additionally, a comprehensive examination is conducted on various bioelectronic materials integrated within hydrogels for applications in implantable medical treatments. The analysis encompasses a detailed discussion on the representative structures and physical attributes of hydrogels. This includes an exploration of their intrinsic properties such as mechanical strength, dynamic capabilities, shape-memory features, stability, stretchability, and water retention characteristics. Moreover, the discussion extends to properties related to interactions with tissues or the environment, such as adhesiveness, responsiveness, and degradability. The intricate relationships between the structure and properties of hydrogels are thoroughly examined, along with an elucidation of how these properties influence their applications in implantable medical treatments. The review also delves into the processing techniques and characterization methods employed for hydrogels. Furthermore, recent breakthroughs in the applications of hydrogels are logically explored, covering aspects such as materials, structure, properties, functions, fabrication procedures, and hybridization with other materials. Finally, the review concludes by outlining the future prospects and challenges associated with hydrogels-based bioelectronics systems.

Progress in Polysaccharide-Based Hydrogels for Preventing Postoperative Adhesions: A Review

Postoperative adhesions are common complications following surgery, often accompanied by pain and inflammation that significantly diminish patients' quality of life. Moreover, managing postoperative adhesions incurs substantial cost, imposing a considerable financial burden on both patients and healthcare systems. Traditional anti-adhesion materials are confronted with limitations, such as inadequate tissue adherence in a moist environment and poor degradability, underscoring the urgent need for more effective solutions. Recently, polysaccharide-based hydrogels have received considerable attention for their potential in preventing postoperative adhesions. The hydrogels not only facilitate wound healing but also effectively reduce inflammation, providing a promising approach to preventing postoperative adhesions. This review provides an extensive analysis of the progress made in the development of polysaccharide-based hydrogels for postoperative anti-adhesion therapy. It highlights their principal benefits, outlines future research trajectories, and addresses the ongoing challenges that need to be overcome.

Bioinspired Janus Mesh with Mechanical Support and Side-specific Biofunctions for Hernia Repair

Postoperative adhesion (PA) caused by the combination of proteins, inflammatory response and bacterial infection poses substantial challenges for polypropylene meshes (PPMs) based hernioplasty. Herein, inspired by the peritoneum, a Janus PPMs with side-specific functions was developed via a surface-initiated photoiniferter-mediated polymerization technology. A physical barrier composed of zwitterionic polymer brushes (PS) was firstly constructed on the one side of the PPMs, while the polymethacrylic acid (PMAA) brushes acting as the linker for bioactive nanoparticles (HAP) were precisely situated on the opposite surface subsequently. Our findings reveal that the mesh surface modified with PS demonstrated significant antifouling property that more than 99% of protein adhesion could be inhibited even after the co-incubation for 72 h in the crucial test. Meanwhile, on the other surface of the PPMs modified with HAP achieved satisfactory ROS-scavenging, inflammation-inhibiting and cell adhesion-promoting properties as well as good bactericidal performance (killing rate > 99.9%). Furthermore, the Janus PPMs could maintain comparable mechanical property with pristine meshes. Equipped with the above multiple merits and asymmetric property, the constructed Janus PPMs demonstrated effective treatment for abdominal hernia defects in vivo without any PA formation. Overall, this study duplicates the unique characteristics of peritoneum onto PPMs to successfully address postoperative complications of the hernioplasty and also offers a versatile and innovative idea to construct asymmetrical functions on the one implant. STATEMENT OF SIGNIFICANCE: The implantation of surgical meshes in the hernia defect provides additional firm support to reinforce the abdomen fascia in tension-free way. However, multiple post-surgery complications induced tissue adhesions is of great challenges for commercial mesh-based hernioplasty. Although material designing and surface modification might circumvent these limitations partly, the construction of side-specific biofunctions on the commercial mesh surfaces is very challenging because of its porous structure. Herein, we demonstrate a feasible and promising approach to construct asymmetric biofunctions on the opposite sides of network structured polypropylene mesh, which is rarely achieved previously. The fabricated Janus PPMs maintains the inherent long-term mechanical support; meanwhile, the opposite sides of PPMs could perform multiple biofunctions independently.

Self-assembled carrier-free formulations based on medicinal and food active ingredients

The popularity of medicinal plants, which have a unique system and are mostly used in compound form for the prevention and treatment of a wide range of diseases, is growing worldwide. In recent years, with advances in chemical separation and structural analysis techniques, many of the major bioactive molecules of medicinal plants have been identified. However, the active ingredients in medicinal plants often possess chemical characteristics, including poor water solubility, stability and bioavailability, which limit their therapeutic applications. To address this problem, self-assembly of small molecules from medicinal food sources provides a new strategy. Driven by various types of acting forces, medicinal small molecules with modifiable groups, multiple sites of action, hydrophobic side chains, and rigid backbones with self-assembly properties are able to form various supramolecular network hydrogels, nanoparticles, micelles, and other self-assemblies. This review first summarizes the forms of self-assemblies such as supramolecular network hydrogels, nanoparticles, and micelles at the level of the action site, and discusses the recent studies on the active ingredients in medicinal plants that can be used for self-assembly, in addition to summarizing the advantages of self-assemblies for a variety of disease applications, including wound healing, antitumor, anticancer, and diabetes mellitus. Finally, the problems of self-assemblers and the possible directions for future development are presented. We firmly believe that self-assemblers have the potential to develop effective compounds from drug-food homologous plants, providing valuable information for drug research and new strategies and perspectives for the modernization of Chinese medicine.

Janus-Structured Microgel Barrier with Tissue Adhesive and Hemostatic Characteristics for Efficient Prevention of Postoperative Adhesion

Postoperative adhesion (POA) is a common and serious complication following various types of surgery. Current physical barriers either have a short residence time at the surgical site with a low tissue attachment capacity or are prone to undesired adhesion formation owing to the double-sided adhesive property, which limits the POA prevention efficacy of the barriers. In this study, Janus-structured microgels (Janus-MGs) with asymmetric tissue adhesion capabilities are fabricated using a novel bio-friendly gas-shearing microfluidic platform. The anti-adhesive side of Janus-MGs, which consists of alginate, hyaluronic acid, and derivatives, endows the material with separation, lubrication, and adhesion prevention properties. The adhesive side provided Janus-MGs with tissue attachment and retention capability through catechol-based adhesion, thereby enhancing the in situ adhesion prevention effect. In addition, Janus-MGs significantly reduced blood loss and shortened the hemostatic time in rats, further reducing adhesion formation. Three commonly used rat POA models with different tissue structures and motion patterns are established in this study, namely peritoneal adhesion, intrauterine adhesion, and peritendinous adhesion models, and the results showed that Janus-MGs effectively prevented the occurrence of POA in all the models. The fabrication of Janus-MGs offers a reliable strategy and a promising paradigm for preventing POA following diverse surgical procedures.

Experimental Study of Products Based on Biocompatible Polymer Material from Methacrylic Oligomers as a Potential Barrier for Preventing Adhesions in Cardiac Surgery

The effectiveness and safety of two types of samples based on a biocompatible polymer material made of methacrylic oligomers (Reperen) as a potential antiadhesion pericardial barrier were evaluated in in vitro and in vivo experiments. Two kinds of samples, reinforced with a polyamide mesh and without reinforcement, were used. In in vitro experiments, no adhesion and aggregation of human fibroblasts to the test samples were detected. In in vivo experiments, the samples implanted to rats into the thigh muscles were easily separated from the surrounding tissues 1, 2, and 3 weeks after implantation, being weakly fixed only in the area of the edges. Histological examination at week 2 after implantation revealed no differences between the experimental and control groups. At week 1 and 3, fibrosis and inflammation were more pronounced in animals of the control group (with simulated implantation). The properties demonstrated by both samples of Reperen barriers (with and without polyamide mesh reinforcement) in vivo and in vitro allow considering them as a potential antiadhesion pericardial barrier for clinical use.

Sprayable anti-adhesive hydrogel for peritoneal macrophage scavenging in post-surgical applications

Post-surgical adhesions frequently occur after intra-abdominal surgery, leading to severe complications. Despite the development of various types of adhesion barriers to address post-surgical adhesions, several limitations persist, including off-target localization, handling difficulties, and potential immunogenicity. Here, we report a spray-type adhesion barrier for broad, fast application, forming two sequential networks. The first network is formed by a polyelectrolyte complex of sulfated hyaluronic acid and chitosan, while the second network is established through pluronic® F127 thermogelation. This sprayable barrier served as both a physical protector for the damaged peritoneum and an immunomodulator for peritoneal macrophages, as evidenced its effectiveness in a rat ischemic button model. Taken together, this efficient adhesion barrier presents a promising solution for post-surgical adhesions.

Mimicking the extracellular world: from natural to fully synthetic matrices utilizing supramolecular biomaterials

The extracellular matrix (ECM) has evolved around complex covalent and non-covalent interactions to create impressive function-from cellular signaling to constant remodeling. A major challenge in the biomedical field is the de novo design and control of synthetic ECMs for applications ranging from tissue engineering to neuromodulation to bioelectronics. As we move towards recreating the ECM's complexity in hydrogels, the field has taken several approaches to recapitulate the main important features of the native ECM (i.e. mechanical, bioactive and dynamic properties). In this review, we first describe the wide variety of hydrogel systems that are currently used, ranging from fully natural to completely synthetic to hybrid versions, highlighting the advantages and limitations of each class. Then, we shift towards supramolecular hydrogels that show great potential for their use as ECM mimics due to their biomimetic hierarchical structure, inherent (controllable) dynamic properties and their modular design, allowing for precise control over their mechanical and biochemical properties. In order to make the next step in the complexity of synthetic ECM-mimetic hydrogels, we must leverage the supramolecular self-assembly seen in the native ECM; we therefore propose to use supramolecular monomers to create larger, hierarchical, co-assembled hydrogels with complex and synergistic mechanical, bioactive and dynamic features.

Nonswellable Hydrogel Patch with Tissue-Mimetic Mechanical Characteristics Remodeling In Vivo Microenvironment for Effective Adhesion Prevention

Postoperative adhesion is a common complication after abdominal surgery, but current clinical products have unsatisfactory therapeutic effects. Here, we present a hydrogel patch formed in a single step through dialysis. The exchange of DMSO into water facilitates hydrophobic aggregate in situ formation and the formation of hydrogen bonds within the hydrogel. Thanks to the optimized component ratio and precise structural design. The hydrogel patch has soft-tissue-like mechanical characteristics, including high strength, high toughness, low modulus similar to the abdominal wall, good fatigue resistance, and fast self-recovery properties. The nonswellable hydrogel patch retains over 80% of its original mechanical properties after 7 days of immersion in physiological saline, with a maximum swelling ratio of 5.6%. Moreover, the hydrophobic biomultifunctionality of benzyl isothiocyanate can self-assemble onto the hydrogel patch during the sol-gel transition process, enabling it to remodel the inflammatory microenvironment through synergistic antibacterial, antioxidant, and anti-inflammatory effects. The hydrogel patch prevents postsurgical adhesion in a rat sidewall defect-cecum abrasion model and outperforms the leading commercial Interceed. It holds promising potential for clinical translation, considering that FDA-approved raw materials (PVA and gelatin) form the backbone of this effective hydrogel patch.

Design and development of novel self-assembled catechol-modified bile acid conjugates as pH-responsive apical sodium-dependent bile acid transporter targeting nanoparticles

Catechol-based biomaterials demonstrate biocompatibility, making them suitable for a wide range of therapeutic applications when integrated into various molecular frameworks. However, the development of orally available catechol-based biomaterials has been hindered by significant pH variations and complex interactions in the gastrointestinal (GI) tract. In this study, we introduce a novel catechol-modified bile acid (CMBA), which is synthesized by anchoring the FDA-approved drug, ursodeoxycholic acid to the neurotransmitter dopamine. This modification could form a new apical sodium-dependent bile acid transporter (ASBT) inhibitor (ASBTi) due to the bile acid moiety. The computational analysis using the TRAnsient Pockets in Proteins (TRAPP) module, coupled with MD simulations, revealed that CMBA exhibits a strong binding affinity at residues 51-55 of ASBT with a low inhibitory constant (Ki) value. Notably, in slightly alkaline biological conditions, CMBA molecules self-assemble into carrier-free nanoparticles with an average size of 240.2 ± 44.2 nm, while maintaining their ability to bind with ASBT. When administered orally, CMBA accumulates in the ileum and liver over 24 h, exhibiting significant therapeutic effects on bile acid (BA) metabolism in a high-fat diet (HFD)-fed mouse model. This study underscores the therapeutic potential of the newly developed catechol-based, pH-responsive ASBT-inhibiting nanoparticles presenting a promising avenue for advancing therapy.

All-in-one polysaccharide hydrogel with resistant vascular burst pressure and cooperative wound microenvironment regulation for fatal arterial hemorrhage and diabetic wound healing

Fatal massive hemorrhage and diabetic wound healing are world widely challenging in surgical managements, and uncontrolled bleeding, chronic inflammation and damaged remodeling heavily hinder the whole healing processes. Considering hemostasis, inflammation and wound microenvironment cooperatively affect the healing progression, we design all-in-one beta-glucan (BG) hybrid hydrogels reinforced with laponite nanoclay that demonstrate tunable tissue adhesion, resistant vascular burst pressure and cooperative wound microenvironment regulation for arterial hemostasis and diabetic wound prohealing. Those hydrogels had honeycomb-like porous microstructure with average pore size of 7-19 μm, tissue adhesion strength of 18-46 kPa, and vascular burst pressure of 58-174 mmHg to achieve superior hemostasis in rat liver and femoral artery models. They could effectively scavenge reactive oxygen species, transform macrophages from proinflammatory M1 into prohealing M2, and shorten the inflammation duration via synergistic actions of BG and nitric oxide (NO). Single treatment of NO-releasing BG hybrid hydrogels attained complete closure of diabetic wounds within 14 days, orchestrated to accelerate the epithelization and dermis growth, and restored normal vascularization, achieving high performance healing with optimal collagen deposition and hair follicle regeneration. Consequently, this work opens up a new avenue to design all-in-one polysaccharide hydrogels for applications in massive bleeding hemostats and diabetic wound dressings.

Paintable Decellularized-ECM Hydrogel for Preventing Cardiac Tissue Damage

The tissue-specific heart decellularized extracellular matrix (hdECM) demonstrates a variety of therapeutic advantages, including fibrosis reduction and angiogenesis. Consequently, recent research for myocardial infarction (MI) therapy has utilized hdECM with various delivery techniques, such as injection or patch implantation. In this study, a novel approach for hdECM delivery using a wet adhesive paintable hydrogel is proposed. The hdECM-containing paintable hydrogel (pdHA_t) is simply applied, with no theoretical limit to the size or shape, making it highly beneficial for scale-up. Additionally, pdHA_t exhibits robust adhesion to the epicardium, with a minimal swelling ratio and sufficient adhesion strength for MI treatment when applied to the rat MI model. Moreover, the adhesiveness of pdHA_t can be easily washed off to prevent undesired adhesion with nearby organs, such as the rib cages and lungs, which can result in stenosis. During the 28 days of in vivo analysis, the pdHA_t not only facilitates functional regeneration by reducing ventricular wall thinning but also promotes neo-vascularization in the MI region. In conclusion, the pdHA_t presents a promising strategy for MI treatment and cardiac tissue regeneration, offering the potential for improved patient outcomes and enhanced cardiac function post-MI.

Beyond Traditional Medicine: EVs-Loaded Hydrogels as a Game Changer in Disease Therapeutics

Extracellular vesicles (EVs), especially exosomes, have shown great therapeutic potential in the treatment of diseases, as they can target cells or tissues. However, the therapeutic effect of EVs is limited due to the susceptibility of EVs to immune system clearance during transport in vivo. Hydrogels have become an ideal delivery platform for EVs due to their good biocompatibility and porous structure. This article reviews the preparation and application of EVs-loaded hydrogels as a cell-free therapy strategy in the treatment of diseases. The article also discusses the challenges and future outlook of EVs-loaded hydrogels.

Fibrin Hydrogel Layer-Anchored Pericardial Matrix Prevents Epicardial Adhesion in the Severe Heart Adhesion-Induced Miniature Pig Model

Postoperative adhesion is a very common and serious complication that occurs frequently in cardiac surgery. The purpose of this study was to evaluate the efficacy of a fibrin hydrogel layer-anchored decellularized pericardial matrix in preventing pericardial adhesions in a miniature pig model with a myocardial injury. Fibrin hydrogel layer-anchored decellularized pericardial matrix was prepared by spraying a mixture of fibrinogen and thrombin on a fibrinogen-doped decellularized pericardium. Cardiac injury was generated by abrading and desiccating the epicardial surface of a miniature pig to induce severe postoperative adhesions. The adhesion between the epicardial surface and fibrin hydrogel layer-anchored decellularized pericardial matrix in three different regions (left outer, front, and right outer) was evaluated macroscopically one month after surgery. The fibrin hydrogel layer-anchored decellularized pericardial matrix showed significantly less adhesion than an autologous pericardium (0.2 ± 0.7 in DPM-FHG0.5 and 0.4 ± 0.8 in DPM-FHG1, p < 0.01) and expanded polytetrafluoroethylene (ePTFE) (1.6 ± 0.5, p < 0.05). The fibrin hydrogel concentration had no effect on preventing postoperative adhesion. A thinner fibrin hydrogel layer was observed on the decellularized pericardial matrix one month after surgery; however, the inside of the matrix was filled with fibrin hydrogel. Fibrin hydrogel layer-anchored decellularized pericardial matrix prevented postoperative epicardial adhesions in a miniature pig model. Our findings suggest that pericardial closure using a fibrin hydrogel layer-anchored decellularized pericardial matrix is a promising method for preventing adverse outcomes in reoperative surgeries.

Robust aortic media adhesion using hydrophobically modified Alaska pollock gelatin-based adhesive for aortic dissections

Type-A aortic dissection is an acute injury involving the delamination of the aorta at the parts of the aortic media. Aldehyde crosslinker-containing glues have been used to adhere to the media of the dissected aorta before joining an artificial graft. These glues effectively adhere to the aortic media; however, they show low biocompatibility due to the release of aldehyde compounds. In this study, we report innovative adhesives based on hydrophobically modified Alaska pollock gelatin (hm-ApGltn) with different alkyl or cholesteryl (Chol) groups that adhere to the media of the dissected aorta by combining hm-ApGltns with a biocompatible crosslinker, pentaerythritol poly(ethylene glycol) ether tetrasuccinimidyl glutarate. The modification of alkyl or Chol groups contributed to enhanced adhesion strength between porcine aortic media. The adhesion strength increased with increasing modification ratios of alkyl groups from propanoyl to dodecanoyl groups and then decreased at a modification ratio of ~20 mol %. Porcine aortic media adhered using 7.5Chol-ApGltn adhesive showed stretchability even when expanded and shrunk vertically by 25% at least five times. Hm-ApGltn adhesives subcutaneously injected into the backs of mice showed no severe inflammation and were degraded during the implantation period. These results indicated that hm-ApGltn adhesives have potential applications in type-A aortic dissection.

Optical mapping of cardiac electromechanics in beating in vivo hearts

Optical mapping has been widely used in the study of cardiac electrophysiology in motion-arrested, ex vivo heart preparations. Recent developments in motion artifact mitigation techniques have made it possible to optically map beating ex vivo hearts, enabling the study of cardiac electromechanics using optical mapping. However, the ex vivo setting imposes limitations on optical mapping such as altered metabolic states, oversimplified mechanical loads, and the absence of neurohormonal regulation. In this study, we demonstrate optical electromechanical mapping in an in vivo heart preparation. Swine hearts were exposed via median sternotomy. Voltage-sensitive dye, either di-4-ANEQ(F)PTEA or di-5-ANEQ(F)PTEA, was injected into the left anterior descending artery. Fluorescence was excited by alternating green and amber light for excitation ratiometry. Cardiac motion during sinus and paced rhythm was tracked using a marker-based method. Motion tracking and excitation ratiometry successfully corrected most motion artifact in the membrane potential signal. Marker-based motion tracking also allowed simultaneous measurement of epicardial deformation. Reconstructed membrane potential and mechanical deformation measurements were validated using monophasic action potentials and sonomicrometry, respectively. Di-5-ANEQ(F)PTEA produced longer working time and higher signal/noise ratio than di-4-ANEQ(F)PTEA. In addition, we demonstrate potential applications of the new optical mapping system including electromechanical mapping during vagal nerve stimulation, fibrillation/defibrillation. and acute regional ischemia. In conclusion, although some technical limitations remain, optical mapping experiments that simultaneously image electrical and mechanical function can be conducted in beating, in vivo hearts.

Chronological adhesive cardiac patch for synchronous mechanophysiological monitoring and electrocoupling therapy

With advances in tissue engineering and bioelectronics, flexible electronic hydrogels that allow conformal tissue integration, online precision diagnosis, and simultaneous tissue regeneration are expected to be the next-generation platform for the treatment of myocardial infarction. Here, we report a functionalized polyaniline-based chronological adhesive hydrogel patch (CAHP) that achieves spatiotemporally selective and conformal embedded integration with a moist and dynamic epicardium surface. Significantly, CAHP has high adhesion toughness, rapid self-healing ability, and enhanced electrochemical performance, facilitating sensitive sensing of cardiac mechanophysiology-mediated microdeformations and simultaneous improvement of myocardial fibrosis-induced electrophysiology. As a result, the flexible CAHP platform monitors diastolic-systolic amplitude and rhythm in the infarcted myocardium online while effectively inhibiting ventricular remodeling, promoting vascular regeneration, and improving electrophysiological function through electrocoupling therapy. Therefore, this diagnostic and therapeutic integration provides a promising monitorable treatment protocol for cardiac disease.

Highly Tough and Biodegradable Poly(ethylene glycol)-Based Bioadhesives for Large-Scaled Liver Injury Hemostasis and Tissue Regeneration

Conventional tissue adhesives face challenges for hemostasis and tissue regeneration in large-scaled hemorrhage and capillary hypobaric bleeding due to weak adhesion, and inability to degrade at specific sites. Herein, convenient and injectable poly(ethylene glycol) (PEG)-based adhesives are developed to address the issues for liver hemostasis. The PEG-bioadhesives are composed of tetra-armed PEG succinimide glutarate (PEG-SG), tetra-armed PEG amine (PEG-NH2 ), and tri-lysine. By mixing the components, the PEG-bioadhesives can be rapidly formulated for use of liver bleeding closure in hepatectomy. The PEG-bioadhesives also possess mechanical compliance to native tissues (elastic modulus ≈40 kPa) and tough tissue adhesion (≈28 kPa), which enables sufficient adhering to the injured tissues and promotes liver regeneration with the PEG-bioadhesive degradation. In both rats of liver injury and pigs of large-scaled hepatic hemorrhage, the PEG-bioadhesives show effective hemostasis with superior blood loss than conventional tissue adhesives. Due to biocompatibility and degradability, the PEG-bioadhesive is advantageous for liver regeneration, while commercial adhesives (e.g., N-octyl cyanoacrylate) display adhesion failure and limited liver reconstructions. These PEG-bioadhesive components are FDA-approved, and demonstrate excellent adhesion to various tissues not only for liver hemostasis, it is a promising candidate in biomedical translations and clinical applications.

Injectable photocurable Janus hydrogel delivering hiPSC cardiomyocyte-derived exosome for post-heart surgery adhesion reduction

Postsurgical pericardial adhesions pose increased risks of sequelae, prolonged reoperation time, and reduced visibility in the surgical field. Here, we introduce an injectable Janus hydrogel, which exhibits asymmetric adhesiveness properties after photocrosslinking, sustained delivering induced pluripotent stem cell-derived cardiomyocyte exosomes (iCM-EXOs) for post-heart surgery adhesion reduction. Our findings reveal that iCM-EXOs effectively attenuate oxidative stress in hydrogen peroxide-treated primary cardiomyocytes by inhibiting the activation of the transcription factor nuclear factor erythroid 2-related factor 2. Notably, in rat cardiac postsurgery models, the Janus hydrogels loaded with iCM-EXOs demonstrate dual functionality, acting as antioxidants and antipericardial adhesion agents. These hydrogels effectively protect iCM-EXOs from GATA6+ cavity macrophage clearance by inhibiting the recruitment of macrophages from the thoracic cavity. These results highlight the promising potential of iCM-EXO-laden Janus hydrogels for clinical safety and efficacy validation in trials involving heart surgery patients, with the ultimate goal of routine administration during open-heart surgeries.

Continuous contractile force and electrical signal recordings of 3D cardiac tissue utilizing conductive hydrogel pillars on a chip

Heart-on-chip emerged as a potential tool for cardiac tissue engineering, recapitulating key physiological cues in cardiac pathophysiology. Controlled electrical stimulation and the ability to provide directly analyzed functional readouts are essential to evaluate the physiology of cardiac tissues in the heart-on-chip platforms. In this scenario, a novel heart-on-chip platform integrating two soft conductive hydrogel pillar electrodes was presented here. Human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) and cardiac fibroblasts were seeded into the apparatus to create 3D human cardiac tissues. The application of electrical stimulation improved functional performance by altering the dynamics of tissue structure and contractile development. The contractile forces that cardiac tissues contract was accurately measured through optical tracking of hydrogel pillar displacement. Furthermore, the conductive properties of hydrogel pillars allowed direct and non-invasive electrophysiology studies, enabling continuous monitoring of signal changes in real-time while dynamically administering drugs to the cardiac tissues, as shown by a chronotropic reaction to isoprenaline and verapamil. Overall, the platform for acquiring contractile force and electrophysiological signals in situ allowed monitoring the tissue development trend without interrupting the culture process and could have diverse applications in preclinical drug testing, disease modeling, and therapeutic discovery.

Dual crosslinked injectable protein-based hydrogels with cell anti-adhesive properties

Currently, one of the most severe clinical concerns is post-surgical tissue adhesions. Using films or hydrogel to separate the injured tissue from surrounding tissues has proven the most effective method for minimizing adhesions. Therefore, by combining dual crosslinking with calcium ions (Ca²⁺) and tetrakis(hydroxymethyl) phosphonium chloride, we were able to create a novel, stable, robust, and injectable dual crosslinking hydrogel using albumin (BSA). This dual crosslinking has preserved the microstructure of the hydrogel network during the degradation process, which contributes to the hydrogel's mechanical strength and stability in a physiological situation. At 60% strain, compressive stress was 48.81 kPa obtained. It also demonstrated excellent self-healing characteristics (within 25 min), tissue adhesion, excellent cytocompatibility, and a quick gelling time of 27 ± 6 s. Based on these features, the dual crosslinked injectable hydrogels might find exciting applications in biomedicine, particularly for preventing post-surgical adhesions.

An endoscopically compatible fast-gelation powder forms Janus-adhesive hydrogel barrier to prevent postoperative adhesions

Postoperative adhesions occur widely in various tissues, bringing the risk of secondary surgery and increased medical burden. Hydrogel barriers with Janus-adhesive ability can achieve physical isolation of adjacent tissues and are therefore considered an ideal solution. However, integrating endoscopic delivery convenience and viscoelastic Janus hydrogel formation remains a great challenge. Here, we present a report of the in situ formation of Janus-adhesive hydrogel barrier using a sprayable fast-Janus-gelation (FJG) powder. We first methacrylate the polysaccharide macromolecules to break the intermolecular hydrogen bonds and impart the ability of rapid hydration. FJG powder can rapidly absorb interfacial water and crosslink through borate ester bonds, forming a toughly adhesive viscoelastic hydrogel. The Janus barrier can be simply formed by further hydrating the upper powder with cationic solution. We construct rat models to demonstrate the antiadhesions efficiency of viscoelastic FJG hydrogels in organs with different motion modalities (e.g., intestine, heart, liver). We also developed a low-cost delivery device with a standardized surgical procedure and further validated the feasibility and effectiveness of FJG powder in minimally invasive surgery using a preclinical translational porcine model. Considering the advantages in terms of therapeutic efficacy, clinical convenience, and commercialization, our results reveal the great potential of Janus-gelation powder materials as a next-generation antiadhesions barrier.

Application of Polymer Hydrogels in the Prevention of Postoperative Adhesion: A Review

Postoperative adhesion is a common post-surgery complication formed between the surface of the body cavity, ranging from a layer of connective tissue to a fibrous bridge containing blood vessels and nerve tissue. Despite achieving a lot of progress, the mechanisms of adhesion formation still need to be further studied. In addition, few current treatments are consistently effective in the prevention of postoperative adhesion. Hydrogel is a kind of water-expanding crosslinked hydrophilic polymer network generated by a simple reaction of one or more monomers. Due to the porous structure, hydrogels can load different drugs and control the drug release kinetics. Evidence from existing studies has confirmed the feasibility and superiority of using hydrogels to counter postoperative adhesions, primarily due to their outstanding antifouling ability. In this review, the current research status of hydrogels as anti-adhesion barriers is summarized, the character of hydrogels in the prevention of postoperative adhesion is briefly introduced, and future research directions are discussed.

Insight into Heart-Tailored Architectures of Hydrogel to Restore Cardiac Functions after Myocardial Infarction

With permanent heart muscle injury or death, myocardial infarction (MI) is complicated by inflammatory, proliferation and remodeling phases from both the early ischemic period and subsequent infarct expansion. Though in situ re-establishment of blood flow to the infarct zone and delays of the ventricular remodeling process are current treatment options of MI, they fail to address massive loss of viable cardiomyocytes while transplanting stem cells to regenerate heart is hindered by their poor retention in the infarct bed. Equipped with heart-specific mimicry and extracellular matrix (ECM)-like functionality on the network structure, hydrogels leveraging tissue-matching biomechanics and biocompatibility can mechanically constrain the infarct and act as localized transport of bioactive ingredients to refresh the dysfunctional heart under the constant cyclic stress. Given diverse characteristics of hydrogel including conductivity, anisotropy, adhesiveness, biodegradability, self-healing and mechanical properties driving local cardiac repair, we aim to investigate and conclude the dynamic balance between ordered architectures of hydrogels and the post-MI pathological milieu. Additionally, our review summarizes advantages of heart-tailored architectures of hydrogels in cardiac repair following MI. Finally, we propose challenges and prospects in clinical translation of hydrogels to draw theoretical guidance on cardiac repair and regeneration after MI.

Outcomes of expanded polytetrafluoroethylene pericardial membrane implantation in left ventricular assist device explantation and heart transplantation

OBJECTIVES

Redo sternotomy and explantation of left ventricular assist devices (LVAD) for heart transplantation (HT) involve prolonged dissection, potential injury to mediastinal structures and/or bleeding. Our study compared a complete expanded polytetrafluoroethylene (ePTFE) wrap versus minimal or no ePTFE during LVAD implantation, on outcomes of subsequent HT.

METHODS

Between July 2005 and July 2018, 84 patients underwent a LVAD implant and later underwent HT. Thirty patients received a complete ePTFE wrap during LVAD implantation (Group 1), and 54 patients received either a sheet of ePTFE placed in the anterior mediastinum or no ePTFE (Group 2).

RESULTS

Baseline characteristics were similar between Groups 1 and 2. Surgeons reported subjective improvements in speed, predictability, and safety of dissection with complete ePTFE compared with minimal or no ePTFE. Time from incision to initiation of cardiopulmonary bypass (CPB) were similar between groups (97 ± 38 vs. 89 ± 29 min, p = .3). Injury to mediastinal structures during the dissection was similar between groups (10% vs. 11%, p > .9). While surgeons reported less intraoperative bleeding in Group 1 (43% vs. 61%), this trend did not reach significance (p = .1). In-hospital mortality, intensive care unit length of stay and hospital length of stay were similar between both groups.

CONCLUSIONS

In patients undergoing LVAD explant-HT, there was a trend toward reduced surgeon reported intraoperative bleeding with ePTFE placement. Despite qualitatively reported greater ease and speed of mediastinal dissection with ePTFE membrane placement, time to initiation of CPB did not differ, likely because surgeons remained cautious, allowing extra time for unanticipated difficulties.

A multi-functional zwitterionic hydrogel with unique micro-structure, high elasticity and low modulus

Owing to their tissue-like softness and low modulus, hydrogels minimize the mechanical mismatch with biological tissues and have received wide attention as biomaterials. However, the development of soft hydrogels is often limited by their brittleness. Here, an ultra-soft and tough hydrogel based on zwitterionic poly(sulfobetaine methacrylate) (PSBMA) was designed and successfully prepared. The obtained PSBMA hydrogel exhibits a unique spike-like micro-structure, low modulus, good stretchability and excellent compressive elasticity, due to the formation of a dual-crosslinking structure. The obtained hydrogel also possesses self-healing properties and electromechanical responses to tensile and compressive deformations. Moreover, the hydrogel has good compatibility attributed to its outstanding anti-protein-adsorption properties.

Injectable Adhesive Hydrogels for Soft tissue Reconstruction: A Materials Chemistry Perspective

Injectable bioadhesives offer several advantages over conventional staples and sutures in surgery to seal and close incisions or wounds. Despite the growing research in recent years few injectable bioadhesives are available for clinical use. This review summarizes the key chemical features that enable the development and improvements in the use of polymeric injectable hydrogels as bioadhesives or sealants, their design requirements, the gelation mechanism, synthesis routes, and the role of adhesion mechanisms and strategies in different biomedical applications. It is envisaged that developing a deep understanding of the underlying materials chemistry principles will enable researchers to effectively translate bioadhesive technologies into clinically-relevant products.

Magnetic nanostructure and biomolecule synergistically promoted Suaeda-inspired self-healing hydrogel composite for seawater evaporation

Multifunctional hydrogels with excellent comprehensive performance are essential prerequisite for the implementation of effective water resources technology with high efficiency and low energy consumption. Inspired by the water purification and self-healing properties of natural plants, and based on the synergy of photothermal and biological effects, high photothermal Fe₃O₄ nanoparticles and natural polyhydroxy oligomeric proanthocyanidin (OPC) are introduced into a water-active polyvinyl alcohol (PVA) hydrogel. Two new bio-hydrogels of PVA/Fe₃O₄/graphite and PVA/OPC with self-healing and stretchable properties are proposed and designed. The obtained hydrogels exhibit reversible covalent cross-linked water-promoted healing (chemically) and photothermal melting/recrystallization healing (physically). The double-layered hydrogel composite demonstrates a dual response function (sunlight and near-infrared light), along with water purification properties. It is prepared through a water spray triggered self-healing process. The ultimate fracture strain of the photothermal layer and purification layer hydrogel was more than 1000% and 400% respectively after self-healing.After 48 h of hydrogel composite adsorption, the color of a methylene blue solution faded, and the absorption peak at 664 nm decreased. In addition, this research adopts a phased evaporation method to concentrate local energy and provide power for seawater evaporation. The evaporation efficiency of seawater induced by near-infrared (NIR) light was up to 3.15 kg m^-2 h^-1, whereas that under sunlight was 1.25 kg m^-2 h^-1. Selection of the evaporation excitation light source allowed control of the evaporation efficiency. The proposed technology is expected to be widely applicable to the staged evaporation of seawater as well as water purification.

Fast-Forming Dissolvable Redox-Responsive Hydrogels: Exploiting the Orthogonality of Thiol-Maleimide and Thiol-Disulfide Exchange Chemistry

Fast-forming yet easily dissolvable hydrogels (HGs) have potential applications in wound healing, burn incidences, and delivery of therapeutic agents. Herein, a combination of a thiol–maleimide conjugation and thiol–disulfide exchange reaction is employed to fabricate fast-forming HGs which rapidly dissolve upon exposure to dithiothreitol (DTT), a nontoxic thiol-containing hydrophilic molecule. In particular, maleimide disulfide-terminated telechelic linear poly(ethylene glycol) (PEG) polymer and PEG-based tetrathiol macromonomers are employed as gel precursors, which upon mixing yield HGs within a minute. The selectivity of the thiol–maleimide conjugation in the presence of a disulfide linkage was established through ¹H NMR spectroscopy and Ellman’s test. Rapid degradation of HGs in the presence of thiol-containing solution was evident from the reduction in storage modulus. HGs encapsulated with fluorescent dye-labeled dextran polymers and bovine serum albumin were fabricated, and their cargo release was investigated under passive and active conditions upon exposure to DTT. One can envision that the rapid gelation and fast on-demand dissolution under relatively benign conditions would make these polymeric materials attractive for a range of biomedical applications.

Self-Healing Hydrogel Embodied with Macrophage-Regulation and Responsive-Gene-Silencing Properties for Synergistic Prevention of Peritendinous Adhesion

Antiadhesion barriers such as films and hydrogels used to wrap repaired tendons are important for preventing the formation of adhesion tissue after tendon surgery. However, sliding of the tendon can compress the adjacent hydrogel barrier and cause it to rupture, which may then lead to unexpected inflammation. Here, a self-healing and deformable hyaluronic acid (HA) hydrogel is constructed as a peritendinous antiadhesion barrier. Matrix metalloproteinase-2 (MMP-2)-degradable gelatin-methacryloyl (GelMA) microspheres (MSs) encapsulated with Smad3-siRNA nanoparticles are entrapped within the HA hydrogel to inhibit fibroblast proliferation and prevent peritendinous adhesion. GelMA MSs are responsively degraded by upregulation of MMP-2, achieving on-demand release of siRNA nanoparticles. Silencing effect of Smad3-siRNA nanoparticles is around 75% toward targeted gene. Furthermore, the self-healing hydrogel shows relatively attenuated inflammation compared to non-healing hydrogel. The mean adhesion scores of composite barrier group are 1.67 ± 0.51 and 2.17 ± 0.75 by macroscopic and histological evaluation, respectively. The proposed self-healing hydrogel antiadhesion barrier with MMP-2-responsive drug release behavior is highly effective for decreasing inflammation and inhibiting tendon adhesion. Therefore, this research provides a new strategy for the development of safe and effective antiadhesion barriers.

Rapidly Self-Deactivating and Injectable Succinyl Ester-Based Bioadhesives for Postoperative Antiadhesion

Postoperative adhesion not only causes severe complications for patients but also increases their economic burden. Injectable bioadhesives with adhesiveness to tissues can cover irregular wounds and stay stable in situ, which is a promising barrier for antiadhesion. However, the potential tissue adhesion caused by bioadhesives' indiscriminate adhesiveness between normal and wounded tissue is still a problem. Herein, by using poly(ethylene glycol) succinimidyl succinate (PEG-SS) and gelatin, a succinyl ester-based bioadhesive (SEgel) was fabricated with self-deactivating properties for postoperative antiadhesion. Because N-hydroxysuccinimide esters (NHS-esters) were used as the adhesive group, the bioadhesives' side in contact with the tissue built covalent anchors quickly to maintain the stability, but the superficial layer facing outward withstood fast hydrolysis and then lost its adhesion within minutes, avoiding the indiscriminate adhesiveness. In addition, because of the specific degradation behavior of succinyl ester, the SEgel with proper in vivo retention was achieved without the worry of causing foreign body reactions and unexpected tissue adhesion. Both the cecum-sidewall adhesion and hepatic adhesion models showed that the SEgel markedly reduced the severity of tissue adhesion. These results, together with the ease of the preparation process and well-proven biocompatibility of raw materials, revealed that the SEgel might be a promising solution for postoperative antiadhesion.

Prospects for prevention of adhesion process during cardiac surgical interventions

The article is devoted to the problem of prevention of adhesions in cardiac surgery. It was determined that the problem is urgent due to the increase in the number of heart surgeries. The formation of adhesions is a reaction of the body after surgery, which is a stage of healing and partly performs a protective function. Nevertheless, the presence of adhesions violates the mechanical properties of the heart, negatively affects central hemodynamics, complicates the surgeon’s task during repeated surgical interventions and increases the risk of repeated operations.It has been shown that at present, for the prevention of adhesions, researchers tend to use biodegradable barrier materials with biocompatibility and the ability to dissolve after performing the barrier function. The main anti-adhesion agents used in cardiac surgery are membranes and gels. The requirements for an “ideal” agent for the prevention of adhesion were determined: biocompatibility, no irritating effect, no effect on wound healing, suppression of the growth of connective tissue in the pericardium.Conclusions. Until now, none of the funds has all the necessary qualities to prevent adhesion in the pericardium. Therefore, the search for effective methods for the prevention of postoperative adhesions remains relevant for cardiac surgery.

4-Arm PEG-Functionalized Decellularized Pericardium for Effective Prevention of Postoperative Adhesion in Cardiac Surgery

Postoperative adhesions are a very common and serious complication in cardiac surgery, and the development of an effective anti-adhesion membrane showing resistance to the physical stimulus generated by the pulsation of the heart is desirable. In this study, an anti-adhesion material was developed through amine coupling between decellularized bovine pericardia (dBPCs) and 4-arm poly(ethylene glycol) succinimidyl glutarate (4-arm PEG-NHS) for the postoperative care of cardiac surgical patients. The efficacy of the 4-arm PEG-functionalized dBPCs in the prevention of adhesions after cardiac surgery was investigated in a rabbit heart adhesion model. The dBPCs meet the requirements for biocompatibility, flexibility, and sufficient suturable strength, and the 4-arm PEG moieties provide an anti-adhesion effect by the high excluded volume interactions of the PEG chains with proteins. The 4-arm PEG-functionalized dBPCs had a significantly greater anti-adhesion effect than the other materials tested and showed re-establishment of the mesothelial monolayer. These results suggested that the 4-arm PEG-functionalized dBPCs are a favorable material for an anti-adhesion membrane.

A functional PVA aerogel-based membrane obtaining sutureability through modified electrospinning technology and achieving promising anti-adhesion effect after cardiac surgery

Pericardial barrier destruction, inflammatory cell infiltration, and fibrous tissue hyperplasia, trigger adhesions after cardiac surgery. There are few anti-adhesion materials that are both functional and sutureable for pericardial reconstruction. Besides, a few studies have reported on the mechanism of preventing pericardial adhesion. Herein, a functional barrier membrane with sutureability was developed via a modified electrospinning method. It was composed of poly(l-lactide-co-caprolactone) (PLCL) nanofibers, poly(vinyl alcohol) (PVA) aerogel, and melatonin, named PPMT. The PPMT had a special microstructure manifested as a staggered arrangement of nanofibers on the surface and a layered macroporous aerogel structure in a cross-section. Besides providing the porosity and hydrophilicity obtained from PVA, the structure also had suitable mechanical properties for stitching due to the addition of PLCL nanofibers. Furthermore, it inhibited the proliferation of fibroblasts by suppressing the activation of Fas and P53, and achieved anti-inflammatory effects by affecting the activity of inflammatory cells and reducing the release of pro-inflammatory factors, such as interleukin 8 (IL-8) and tumor necrosis factor α (TNF-α). Finally, in vivo transplantation showed that it up-regulated the expression of matrix metalloproteinase-1 (MMP1) and tissue inhibitor of metalloproteinase-1 (TIMP1), and down-regulated the expression of Vinculin and transforming growth factor β (TGF-β) in the myocardium, thereby reducing the formation of adhesions. Collectively, these results demonstrate a great potential of PPMT membrane for practical application to anti-adhesion.

•

A functional PVA aerogel-based membrane (PPMT) obtained sutureability through modified electrospinning technology.

•

The primary mechanism to anti-adhesion of PPMT membrane was explored.

•

Promising anti-adhesion effect of PPMT membrane was accomplished in pericardium reconstruction in rabbit.