A general strategy for heterogenizing olefin polymerization catalysts and the synthesis of polyolefins and composites

Direct Synthesis of Polar-Functionalized Polyolefin Elastomers

Polyolefin elastomers (POEs) are widely used for many applications including plastic toughening and encapsulating photovoltaic modules. The introduction of polar groups into POEs improves their compatibility and adhesion with polar components, but it is challenging to prepare high-molecular-weight polar-functionalized POEs (P-POEs) via copolymerization. Here, we report a silane protection strategy to enable the production of P-POEs (including an ethylene-based P-EPOE and a propylene-based P-PPOE) with widely tunable 1-octene incorporation ratios (7.4-19.8 mol %), appropriate polar monomer incorporation ratios (0.7-2.7 mol %), melting points (63.8-99.8 °C), and high molecular weights (up to 43.8×104 g mol-1). This approach involved the early transition metal-catalyzed terpolymerization of ethylene or propylene, 1-octene, and protected polar monomers. This silane protection strategy is superior to the previously widely practiced aluminum-based protection strategies in terms of polymerization activity, polymer molecular weight, comonomer incorporation, and product processibility. Most importantly, the P-POE products exhibited excellent mechanical properties and elasticity and served as high-performance compatibilizers and adhesives to enhance the functional applications of POEs.

Unraveling the Reactivity of SiO2-Supported Nickel Catalyst in Ethylene Copolymerization with Polar Monomers: A Theoretical Study

Understanding the catalytic behavior of heterogeneous systems for the copolymerization of ethylene with polar monomers is essential for developing advanced functional polyolefins. In this study, we conducted a quantum chemical investigation of the SiO2-supported Ni-allyl-α-imine ketone catalyst (Ni-OH@SiO2) to uncover the factors governing monomer insertion, selectivity, and reactivity. Using DFT calculations and energy decomposition analysis (ALMO-EDA), we evaluated the coordination and insertion of six industrially relevant polar monomers, comparing their behavior to ethylene homopolymerization. Our results show that special polar monomers (SPMs) with aliphatic spacers, such as vinyltrimethoxysilane (vTMS) and 5-hexenyl acetate (AMA), exhibit favorable insertion profiles due to enhanced electrostatic and orbital interactions with minimal steric hindrance. In contrast, fundamental polar monomers (FPMs), including methyl acrylate (MA) and vinyl chloride (vCl), show higher activation barriers and increased Pauli repulsion due to strong electron-withdrawing effects and conjugation with the vinyl group. AMA displayed the lowest activation barrier (7.4 kcal/mol) and highest insertion thermodynamic stability (-17.6 kcal/mol). These findings provide molecular-level insight into insertion mechanisms and comonomer selectivity in Ni-allyl catalysts supported on silica, extending experimental understanding. This work establishes key structure-reactivity relationships and offers design principles for developing efficient Ni-based heterogeneous catalysts for polar monomer copolymerization.

Recent developments in polymer chemistry, medicinal chemistry and electro-optics using Ni and Pd-based catalytic systems

Catalysis is the fastest and continuously growing field in chemistry. A key component of this process is catalytic systems, which result in increased reaction rates and yields, as well as the ability to tailor the properties of products to the final application. With the development of catalysis, the requirements for catalysts used in these processes have also grown rapidly. Modern catalytic materials should overcome the challenges posed by the modern world of chemistry. They should be durable, and stable, have good catalytic properties, and allow catalytic processes to be carried out under mild and environmentally friendly conditions. In this article, we provide an overview of recent reports on the use of catalytic systems based on nickel and palladium ions in catalytic reactions, leading to functional materials used in the fields of medicinal chemistry, polymer chemistry and electro-optical materials chemistry. Research on the optimization and modification of existing synthetic methods, reports on the synthesis of new functional materials, and articles on new, more efficient catalytic systems that overcome the drawbacks of existing catalysts are described. The presented article reviews current knowledge, providing the newest information from the world of catalysis and synthesis of advanced functional materials, presenting potential directions for further development in these fields.

Ultrahigh Molecular Weight Ethylene-Acrylate Copolymers Synthesized with Highly Active Neutral Nickel Catalysts

Molecular weight is a crucial parameter in catalytic olefin polymerization to determine the thermomechanical properties of polymers. Elevating the molecular weight of ethylene-acrylate copolymer, a typical polar polyolefin has been a persistent challenge. This study presents the direct synthesis of ultrahigh molecular weight (UHMW) ethylene-acrylate copolymers using a highly active, neutral, single-component phosphine-phenolate nickel catalyst under mild conditions. The coordination-insertion copolymerization of ethylene and various acrylates, such as methyl acrylate, n-butyl acrylate, and t-butyl acrylate, can yield ethylene-acrylate copolymers with UHMWs (Mn) ranging from 1000 to 2700 kDa, with exceptional activities of up to 4.03 × 106 g mol-1 h-1. A relatively large-scale synthesis (30-50 g) of UHMW ethylene-acrylate copolymers was notably achieved. The properties of these UHMW ethylene-acrylate copolymers were comprehensively evaluated, demonstrating that these copolymers retained the bulk properties of ultrahigh molecular weight polyethylene (UHMWPE) while exhibiting improved surface and dyeing properties. In particular, the tensile strength of the ethylene-acrylate copolymers significantly increased with higher molecular weights, reaching 44 MPa (147 MPa after a predrawing ratio of 3.1), which is comparable to that of UHMWPE.

Advances in High-Temperature Non-Metallocene Catalysts for Polyolefin Elastomers

Despite the great successes achieved by metallocene catalysts in high-value-added polyolefin elastomer, the challenging preparation conditions and undesirable high-temperature molecular weight capabilities have compromised the efficiency and cost of polyolefin in industrial production. Recently, non-metallocene catalysts have received considerable attention due to their high thermostability, especially when coordinated with early transition metals. This review provides an overview of these early transition metal non-metallocene catalysts, which are mainly composed of N,N'-, N,O-, and N,S-bidentate complexes and tridentate complexes. The structural characteristics, catalytic performance, advantages, and disadvantages of the relevant non-metallocene catalysts, as well as their applications, are discussed. Candidates for commercialization of non-metallocene catalysts are proposed-focusing on imine-enamine, amino-quinoline, and pyridine-imine catalysts-by comparing the successful industrialization cases of metallocene catalysts. Finally, the trend in the research on non-metallocene catalysts and the strategies to address the challenges limiting their commercialization are considered.

Functional Polyolefins and Composites

Polyolefins are simple hydrocarbons that require additional chemical modifications or functional additives to give them custom functions. Recent research in the development of functional polyolefins has surpassed the traditional approach of simply improving surface properties by incorporating polar moieties. Creating custom functionalized polyolefins by using specific functional units has attracted increasing attention. This review summarizes advances in preparing custom functionalized polyolefin materials using functional units such as comonomers, chain-transfer agents, post-polymerization modification reagents, and functional fillers. Exploring new functional units and innovative synthetic strategies will further enhance the performance and expand the applications of functional polyolefins.

Polyethylene-poly(methyl acrylate) Block Copolymers from PACE-SARA ATRP: Utilizing Polyolefin Active Ester Exchange-Based Macroinitiators in Atom Transfer Radical Polymerization

Accessing a facile pathway to prepare polyolefin-polar block copolymers with low dispersity and high control remains a challenge due to the distinct polymerization pathways of the composing blocks. This study utilized the polyolefin active ester exchange, the PACE approach, as a viable solution. The PACE approach, using palladium-catalyst-based coordination-insertion polymerization, was combined with SARA ATRP (supplemental activator/reducing agent atom transfer radical polymerization). A single-chain-end active ester functionalized polyethylene (PE) was produced from an α-diimine Pd(II) hexafluoroisopropyl ester chelate complex, which facilitated a living polymerization of ethylene. Transesterification with 2-hydroxyethyl α-bromoisobutyrate (HOBIB) or 2-hydroxyethyl α-bromoisobutyramide (HOBIBA) formed α-bromoisobutyrate or α-bromoisobutyramide chain-end-functionalized polyethylene. The approach resulted in controlled synthesis of polymers with low dispersity (Đ), high initiation efficiency, and high reproducibility. Both the amide-linked and ester-linked macroinitiators showed >90% initiation efficiency and Đ values of block copolymers as low as 1.05. This work demonstrated a successful combination of two living polymerization techniques, an insertion and controlled radical polymerization, unified in PACE-SARA ATRP, offering access to polyolefin-containing block copolymers with chemically distinct structures.

Integrated Ziegler-Natta/Brookhart-Ni Catalysts for the Synthesis of Sutured Polar High-Impact Polypropylenes

The direct synthesis of polar high-impact polypropylenes using industrially-preferred heterogeneous catalysts is challenging due to the poisoning of polar functional groups towards metal center and the high stereo-selectivity requirement. In this work, dual-site catalysts combining Ziegler-Natta and Brookhart-Ni catalysts were used to produce polar polyolefin ionomers, followed by polar high-impact polypropylenes containing isotactic polypropylene and branched polyethylene as toughening agents. Three combination modes between these catalysts were investigated, including mixed, core-shell, and integrated types. The integrated dual-site catalyst achieved the optimal material properties because the polyolefin ionomer acted as a suture molecule that stitched different components into a whole network. This produced sutured polar high-impact polypropylenes with excellent mechanical properties and compatibility with polar substances. The restraining effect of the suture molecules greatly reduced the release of microplastic particles after aging. Moreover, the obtained polar high-impact polypropylene can serve as an efficient compatibilizer to recycle polyethylene/polypropylene mixed-waste plastics. This work provides an appealing and potentially practical strategy to upgrade the widely used polypropylenes and to alleviate the ever-growing plastic pollution issue.

Nickel-catalyzed in situ synthesis of UHMWPE/TiO2 composites with enhanced mechanical properties and adjustable photocatalytic degradabilities

Expanding the application field of polyolefin materials through functionalization has been a research hotspot in the past three decades. Here, a TiO2-supported anilinenaphthoquinone nickel catalyst was assembled and applied for in situ ethylene polymerization with high activity (>2000 kg mol-1h-1) to produce ultra-high molecular weight polyethylene (UHMWPE)/TiO2 composites with unique physicochemical performance. The UHMWPE/TiO2 composite films and fibers prepared by in-situ ethylene polymerization are superior to the samples from the blend system in issues such as TiO2 dispersibility, mechanical property, and photocatalytic degradability. The mechanical properties (strength up to 26.8 cN/dtex, modulus up to 1248.8 cN/dtex) of the obtained UHMWPE/TiO2 composite fibers are significantly improved with a very low dosage of TiO2 (as low as 1.4 wt‰). Moreover, UHMWPE/TiO2 composites obtained by coating Al2O3 and SiO2 on the surface of TiO2 not only retain the strong absorption of ultraviolet rays, but also effectively weaken the photocatalytic degradation effect.

Upgrading Polyolefin Plastic Waste into Multifunctional Porous Graphene using Silicone-Assisted Direct Laser Writing

The widespread use of plastics, especially polyolefin including polyethylene and polypropylene, has led to severe environmental crises. Chemical recycling, a promising solution for extracting value from plastic waste, however, is underutilized due to its complexity. Here, a simple approach, silicone-assisted direct laser writing (SA-DLW) is developed, to upgrade polyolefin plastic waste into multifunctional porous graphene, called laser-induced graphene (LIG). This method involves infiltrating polyolefins with silicone, which retards ablation during the DLW process and supplies additional carbon atoms, as confirmed by experimental and molecular dynamic results. A remarkable conversion yield of 38.3% is achieved. The upgraded LIG exhibited a porous structure and high conductivity, which is utilized for the fabrication of diverse energy and electronic devices with commendable performance. Furthermore, the SA-DLW technique is versatile for upgrading plastic waste in various types and forms. Upgrading plastic waste in the form of fabric has significantly simplified pre-treatment. Finally, a wearable flex sensor is fabricated on the non-woven fabric of a discarded medical mask, which is applied for gesture monitoring. This work offers a simple but effective solution to upgrade plastic waste into valuable products, contributing to the mitigation of environmental challenges posed by plastic pollution.

Synthesis of Photoresponsive Fast Self-healing Polyolefin Composites by Nickel-Catalyzed Copolymerization of Ethylene and Lignin Cluster Monomers

Polymers may suffer from sudden mechanical damages during long-term use under various harsh operating environments. Rapid and real-time self-healing will extend their service life, which is particularly attractive in the context of circular economy. In this work, a lignin cluster polymerization strategy (LCPS) was designed to prepare a series of lignin functionalized polyolefin composites with excellent mechanical properties through nickel catalyzed copolymerization of ethylene and lignin cluster monomers. These composites can achieve rapid self-healing within 30 seconds under a variety of extreme usage environments (underwater, seawater, extremely low temperatures as low as -60 °C, organic solvents, acid/alkali solvents, etc.), which is of great significance for real-time self-healing of sudden mechanical damage. More importantly, the dynamic cross-linking network within these composites enable great re-processability and amazing sealing performances.

Exploring ethylene insertion reaction mechanism in nickel complexes: a comparative study by the reaction force and reaction electronic flux in molecular and SiO2-supported catalysts

CONTEXT

This study investigates the ethylene insertion reaction mechanism for polymerization catalysis, aiming to discern differences between Ni-α-imine ketone-type catalyst and their SiO2-supported counterpart. The reaction force analysis unveils a more intricate mechanism with SiO2 support, shedding light on unexplored factors and elucidating the observed lower catalytic activity. Furthermore, reactivity indexes suggest earlier ethylene activation in the supported catalyst, potentially enhancing overall selectivity. Finally, the reaction electronic flux analysis provides detailed insights into the electronic activity at each step of the reaction mechanism. In sum, this study offers a comprehensive understanding of the ethylene insertion reaction mechanism in both molecular and supported catalysts, underscoring the pivotal role of structural and electronic factors in catalytic processes.

METHODS

Density functional theory (DFT) calculations were conducted using the ωB97XD functional and the 6-31 + G(d,p) basis sets with Gaussian16 software. Computational techniques utilized in this study encompassed the IRC method, reaction force analysis, and evaluation of electronic descriptors such as electronic chemical potential, molecular hardness, and electrophilicity reactivity indexes. Additionally, reaction electronic flux analysis was employed to investigate electronic activity along the reaction coordinate.

Stapler Strategies for Upcycling Mixed Plastics

Mechanical recycling is one of the simplest and most economical strategies to address ever-increasing plastic pollution, but it cannot be applied to immiscible mixed plastics and suffers from property deterioration after each cycle. By combining the amphiphilic block copolymer strategy and reactive compatibilization strategy, we designed a series of stapler strategies for compatibilizing/upcycling mixed plastics. First, various functionalized graft copolymers were accessed via different synthetic routes. Subsequently, the addition of a very small amount of stapler molecules induced a synergistic effect with the graft copolymers that improved the compatibility and mechanical properties of mixed plastics. These strategies were highly effective for various binary/ternary plastic systems and can be directly applied to postconsumer waste plastics, which can increase the toughness of mixed postconsumer waste plastics by 162 times. Most importantly, it also effectively improved the impact resistance, adhesion performance, and three-dimensional (3D) printing performance of mixed plastics, and permitted the recycling of plastic blends 20 times with minimal degradation in their mechanical properties.

Catalyst Editing via Post-Synthetic Functionalization by Phosphonium Generation and Anion Exchange for Nickel-Catalyzed Ethylene/Acrylate Copolymerization

Rapid, efficient development of homogeneous catalysts featuring desired performance is critical to numerous catalytic transformations but remains a key challenge. Typically, this task relies heavily on ligand design that is often based on trial and error. Herein, we demonstrate a "catalyst editing" strategy in Ni-catalyzed ethylene/acrylate copolymerization. Specifically, alkylation of a pendant phosphine followed by anion exchange provides a high yield strategy for a large number of cationic Ni phosphonium catalysts with varying electronic and steric profiles. These catalysts are highly active in ethylene/acrylate copolymerization, and their behaviors are correlated with the electrophile and the anion used in late-stage functionalization.

Recent Advancements in the Synthesis of Ultra-High Molecular Weight Polyethylene via Late Transition Metal Catalysts

Ultra-high molecular weight polyethylenes (UHMWPEs) are significant engineering plastics for their unique properties, such as high impact resistance, abrasion resistance, weatherability, lubricity, and chemical resistance. Consequently, developing a suitable catalyst is vital in facilitating the preparation of UHMWPE. The late transition metal catalysts have emerged as effective catalysts in producing UHMWPE due to their availability, enhanced tolerance to heteroatom groups, active polymerization characteristics, and good copolymerization ability with polar monomers. In this review, we mainly focus on the late transition metal catalysts, summarizing advancements in their application over the past decade. Four key metals (Ni, Pd, Fe, Co) for generating linear or branched UHMWPE will be primarily explored in this manuscript.

Recent Advances in Nickel Catalysts with Industrial Exploitability for Copolymerization of Ethylene with Polar Monomers

The direct copolymerization of ethylene with polar monomers to produce functional polyolefins continues to be highly appealing due to its simple operation process and controllable product microstructure. Low-cost nickel catalysts have been extensively utilized in academia for the synthesis of polar polyethylenes. However, the development of high-temperature copolymerization catalysts suitable for industrial production conditions remains a significant challenge. Classified by the resultant copolymers, this review provides a comprehensive summary of the research progress in nickel complex catalyzed ethylene-polar monomer copolymerization at elevated temperatures in the past five years. The polymerization results of ethylene-methyl acrylate copolymers, ethylene-tert-butyl acrylate copolymers, ethylene-other fundamental polar monomer copolymers, and ethylene-special polar monomer copolymers are thoroughly summarized. The involved nickel catalysts include the phosphine-phenolate type, bisphosphine-monoxide type, phosphine-carbonyl type, phosphine-benzenamine type, and the phosphine-enolate type. The effective modulation of catalytic activity, molecular weight, molecular weight distribution, melting point, and polar monomer incorporation ratio by these catalysts is concluded and discussed. It reveals that the optimization of the catalyst system is mainly achieved through the methods of catalyst structure rational design, extra additive introduction, and single-site catalyst heterogenization. As a result, some outstanding catalysts are capable of producing polar polyethylenes that closely resemble commercial products. To achieve industrialization, it is essential to further emphasize the fundamental science of high-temperature copolymerization systems and the application performance of resultant polar polyethylenes.

Aqueous Coordination-Insertion Copolymerization for Producing High Molecular Weight Polar Polyolefins

Hydrocarbons, when used as the medium for transition metal catalyzed organic reactions and olefin (co-)polymerization, are ubiquitous. Environmentally friendly water is highly attractive and long-sought, but is greatly challenging as coordination-insertion copolymerization reaction medium of olefin and polar monomers. Unfavorable interactions from both water and polar monomer usually lead to either catalyst deactivation or the formation of low-molecular-weight polymers. Herein, we develop well-behaved neutral phosphinophenolato nickel catalysts, which enable aqueous copolymerization of ethylene and diverse polar monomers to produce significantly high-molecular-weight linear polar polyolefins (219-549 kDa, 0.13-1.29 mol %) in a single-component fashion under mild conditions for the first time. These copolymerization reactions occur better in water than in hydrocarbons such as toluene. The dual characteristics of high molecular weight and the incorporation of a small amount of functional group result in improved surface properties while retain the desirable intrinsic properties of high-density polyethylene (HDPE).

Ethylene/Polar Monomer Copolymerization by [N, P] Ti Complexes: Polar Copolymers with Ultrahigh-Molecular Weight

A series of novel titanium complexes (2a-2e) bearing [N, P] aniline-chlorodiphenylphosphine ligands (1a-1e) featuring CH3 and F substituents have been synthesized and characterized. Surprisingly, in the presence of polar additive, the complexes (2a-2e) all displayed high catalytic activities (up to 1.04 × 106 gPolymer (mol·Ti)-1·h-1 and produced copolymer with the ultrahigh molecular weight up to 1.37 × 106 g/mol. The catalytic activities are significantly enhanced by introducing electron-withdrawing group (F) into the aniline aromatic ring. Especially, the increase in activity based on different complexes followed the order of 2e > 2d > 2c > 2b > 2a. Simultaneously, density functional theory (DFT) calculations have been performed to probe the polymerization mechanism as well as the electronic and steric effects of various substituents on the catalyst backbone. DFT computation revealed that the polymerization behaviors could be adjusted by the electronic effect of ligand substituents; however, it has little to do with the steric hindrance of the substituents. Furthermore, theoretical calculation results keep well in accordance with experimental measurement results. The article provided an appealing design method that the employment of fluorine atom as electron-withdrawing to be studied is the promotive effect of transition-metal coordination polymerization.

Block Copolymers of Polyolefins with Polyacrylates: Analyzing and Improving the Blocking Efficiencies Using MILRad/ATRP Approach

Despite their industrial ubiquity, polyolefin-polyacrylate block copolymers are challenging to synthesize due to the distinct polymerization pathways necessary for respective blocks. This study utilizes MILRad, metal-organic insertion light-initiated radical polymerization, to synthesize polyolefin-b-poly(methyl acrylate) copolymer by combining palladium-catalyzed insertion-coordination polymerization and atom transfer radical polymerization (ATRP). Brookhart-type Pd complexes used for the living polymerization of olefins are homolytically cleaved by blue-light irradiation, generating polyolefin-based macroradicals, which are trapped with functional nitroxide derivatives forming ATRP macroinitiators. ATRP in the presence of Cu(0), that is, supplemental activators and reducing agents , is used to polymerize methyl acrylate. An increase in the functionalization efficiency of up to 71% is demonstrated in this study by modifying the light source and optimizing the radical trapping condition. Regardless of the radical trapping efficiency, essentially quantitative chain extension of polyolefin-Br macroinitiator with acrylates is consistently demonstrated, indicating successful second block formation.

In-situ photo-crosslinkable elastomer based on polyalphaolefin/halloysite nanohybrid

In this research, new injectable and in situ photocurable elastomeric nanohybrids have been fabricated from polyalphaolefin (PAO) resins and halloysite nanofiller. In this regard, the co-oligomerization of long α-olefin monomers (C6, C8 and C10) with alkenol counterparts was carried out via a simple cationic route to provide OH-functionalized PAOs. The newly formed PAO type copolymer resins as well as halloysite nanoclay were then equipped with photocurable CC bonds containing an acrylate moiety. After the characterization of the final chemical substances and also of the intermediate structures, experimentally and computationally by means of Density Functional Theory (DFT) calculations, the neat treated PAO and PAO/halloysite nanohybrids were subjected to a curing process by visible light irradiation (λ ∼ 475 nm, blue light). The crosslinking efficiency of the neat resins and the formed nanohybrid was evaluated using shrinkage strain-time curves and equilibrium swelling method. The suggested nanohybrid is not only biocompatible (96 % in the MTT assay), and hydrophilic (with a water contact angle of 61°), but also exhibits an easy, fast and robust curing process with great potential for coating and sealing technologies for medical devices.

Synthesis of Polar-functionalized Isotactic Polypropylenes Using Commercial Heterogeneous Ziegler-Natta Catalyst

The efficient synthesis of polar-functionalized polypropylenes with high molecular weight and high stereoregularity represents a challenging task. This challenge becomes even more daunting when pursuing an industrially preferred heterogeneous process. This study demonstrated the realization of these goals through the use of commercial heterogeneous Ziegler-Natta catalysts in the copolymerization of propylene with ionic cluster polar monomers. The results revealed high copolymerization activity (∼1.1 × 107 g mol-1 h-1), moderate polar monomer incorporation ratios (∼4.9 mol %), high copolymer molecular weight (Mw > 105 g mol-1), high stereoregularity ([mmmm] ∼ 96%), and high melting temperature range (150-162 °C). The utilization of ionic cluster polar monomers improved the thermal stability as well as stereoselectivity of the catalyst. Moreover, the Ziegler-Natta catalyst can homopolymerize ionic cluster polar monomers with high activities (>104 g mol-1 h-1). The resulting polar-functionalized isotactic polypropylenes (iPP) exhibited superior tensile strength, impact strength, creep resistance, transparency, and crystallinity compared with nonpolar iPP. This enhancement was attributable to the dual roles of the ionic cluster polar monomer unit, serving as both a transparent nucleating agent and a dynamic cross-linking functionality. Furthermore, the polar-functionalized iPP exhibited improved compatibility with polar materials, offering benefits for applications in composites, recycling of mixed plastic wastes, 3D printing, and other fields. This study offered a comprehensive solution for the future industrial production of polar-functionalized iPP via copolymerization, bridging the gap between an efficient and practical copolymerization process from a synthetic chemistry perspective and enhanced material properties from an application perspective.

Light, Heat, and Force-Responsive Polyolefins

Stimuli-responsive polymers have found applications as shape-memory materials, optical switches, and sensors, but the installation of these responsive properties in non-polar and inert polyolefins is challenging. In this contribution, a series of spiropyran (SP)-based comonomers are synthesized and copolymerized with ethylene or ethylene/cyclic monomers. In addition to great mechanical and surface properties, these functionalized polyolefins responded to light, heat, and force, which induced changes in the polymer structure to transmit color or mechanical signals. These interesting responsive properties are also installed in a series of commercial polyolefin materials through reactive extrusion, making the scalable production of these materials possible.

Trends in Structure and Ethylene Polymerization Reactivity of Transition-Metal Permethylindenyl-phenoxy (PHENI*) Complexes

A family of ansa-permethylindenyl-phenoxy (PHENI*) transition-metal chloride complexes has been synthesized and characterized (1-7; {(η5-C9Me6)Me(R″)Si(2-R-4-R'-C6H2O)}MCl2; R,R' = Me, tBu, Cumyl (CMe2Ph); R″ = Me, nPr, Ph; M = Ti, Zr, Hf). The ancillary chloride ligands could readily be exchanged with halides, alkyls, alkoxides, aryloxides, or amides to form PHENI* complexes [L]TiX2 (8-17; X = Br, I, Me, CH2SiMe3, CH2Ph, NMe2, OEt, ODipp). The solid-state crystal structures of these PHENI* complexes indicate that one of two conformations may be preferred, parametrized by a characteristic torsion angle (TA'), in which the η5 system is either disposed away from the metal center or toward it. Compared to indenyl PHENICS complexes, the permethylindenyl (I*) ligand appears to favor a conformation in which the metal center is more accessible. When heterogenized on solid polymethylaluminoxane (sMAO), titanium PHENI* complexes exhibit exceptional catalytic activity toward the polymerization of ethylene. Substantially greater activities are reported than for comparable PHENICS catalysts, along with the formation of ultrahigh-molecular-weight polyethylenes (UHMWPE). Catalyst-cocatalyst ion pairing effects are observed in cationization experiments and found to be significant in homogeneous catalytic regimes; these effects are also related to the influence of the ancillary ligand leaving groups in slurry-phase polymerizations. Catalytic efficiency and polyethylene molecular weight are found to increase with pressure, and PHENI* catalysts can be categorized as being among the most active for the controlled synthesis of UHMWPE.

Synthesis of α-Diimine Complex Enabling Rapidly Covalent Attachment to Silica Supports and Application of Homo-/Heterogeneous Catalysts in Ethylene Polymerization

For covalent attachment-supported α-diimine catalysts, on the basis of ensuring the thermal stability and activity of the catalysts, the important problem is that the active group on the catalyst can quickly react with the support, anchoring it firmly on the support, shortening the loading time, reducing the negative impact of the support on the active centers, and further improving the polymer morphology, which makes them suitable for use in industrial polymerization temperatures. Herein, we synthesized a α-diimine nickel(II) catalyst bearing four hydroxyl substituents. The hydroxyl substituents enable the catalyst to be immobilized firmly on silica support by covalent linkage in 5-10 min. Compared with the toluene solvent system, the homogeneous catalysts show high activity and thermal stability in hexane solvent at the same conditions. Compared with homogeneous catalysts, heterogeneous catalysis leads to improvements in catalyst lifetime, polymer morphology control, catalytic activity, and the molecular weight of polyethylene (up to 679 kg/mol). The silica-supported catalysts resulted in higher melting temperatures as well as lower branching densities in polyethylenes. Even at 70 °C, the polyethylene prepared by S-CatA-2 still exhibits dispersed particle morphology, and there is no phenomenon of reactor fouling, which is suitable for industrial polymerization processes.

A Supported Catalyst that Enables the Synthesis of Colorless CO2 -Polyols with Ultra-Low Molecular Weight

Ultra-low molecular weight (ULMW) CO2 -polyols with well-defined hydroxyl end groups represent useful soft segments for the preparation of high-performance polyurethane foams. However, owing to the poor proton tolerance of catalysts towards CO2 /epoxide telomerization, it remains challenging to synthesize ULMW yet colorless CO2 -polyols. Herein, we propose an immobilization strategy of constructing supported catalysts by chemical anchoring of aluminum porphyrin on Merrifield resin. The resulting supported catalyst displays both extremely high proton tolerance (≈8000 times the equivalents of metal centers) and independence of cocatalyst, affording CO2 -polyols with ULMW (580 g mol-1 ) and high polymer selectivity (>99 %). Moreover, the ULMW CO2 -polyols with various architectures (tri-, quadra-, and hexa-arm) can be obtained, suggesting the wide proton universality of supported catalysts. Notably, benefiting from the heterogeneous nature of the supported catalyst, colorless products can be facilely achieved by simple filtration. The present strategy provides a platform for the synthesis of colorless ULMW polyols derived from not only CO2 /epoxides, but also lactone, anhydrides etc. or their combinations.

Photodegradable polar-functionalized polyethylenes

The degradation of plastics has attracted much attention from the global community. Polyethylenes (PEs), as the most abundant synthetic plastics, are most frequently studied. PE is non-degradable and non-polar because of the sole presence of the pure hydrocarbon components. Concurrent incorporation of both in-chain cleavable and functional groups into the PE chain is an effective pathway to overcome the non-degradable and non-polar issue; however, the method for achieving this pathway remains elusive. Here, we report a strictly non-alternating (>99%) terpolymerization of ethylene with CO and fundamental polar monomers via a coordination-insertion mechanism using late transition metal catalysts, which effectively prevents the formation of undesired chelates originating from both co-monomers under a low CO concentration. High-molecular-weight linear PEs with both in-chain isolated keto (>99%) and main-chain functional groups are prepared. The incorporation of key low-content isolated keto groups makes PEs photodegradable while retaining their desirable bulk material properties, and the introduction of polar functional groups considerably improves their surface properties.

A co-anchoring strategy for the synthesis of polar bimodal polyethylene

Since polar groups can poison the metal centers in catalysts, the incorporation of polar comonomers usually comes at the expense of catalytic activity and polymer molecular weight. In this contribution, we demonstrate polar bimodal polyethylene as a potential solution to this trade-off. The more-polar/more-branched low-molecular-weight fraction provides polarity and processability, while the less-polar/less-branched high-molecular-weight fraction provides mechanical and melt properties. To achieve high miscibility between these two fractions, three synthetic routes are investigated: mixtures of homogeneous catalysts, separately supported heterogeneous catalysts, and a co-anchoring strategy (CAS) to heterogenize different homogeneous catalysts on one solid support. The CAS route is the only viable strategy for the synthesis of polar bimodal polyethylene with good molecular level entanglement and minimal phase separation. This produces polyolefin materials with excellent mechanical properties, surface/dyeing properties, gas barrier properties, as well as extrudability and 3D-printability.

Nonsteroidal anti-inflammatory drug monitoring in serum: a Tb-MOF-based luminescent mixed matrix membrane detector with high sensitivity and reliability

The identification of drugs or biomolecules for public health monitoring requires facile analytical technologies with excellent sensitivity, portability and reliability. In the past decades, different sensing materials have inspired the development of various bioanalytical strategies. However, sensing platforms based on powder materials are not suitable for medical diagnosis, which limits further exploration and application of biosensors. Herein, a point-of-care testing (POCT) membrane was designed from an energy competition mechanism and achieved the detection of the nonsteroidal antiphlogistic diclofenac, and exhibited remarkable testing efficacy at the ppb level. The mixed matrix membrane (MMM) sensor consists of electrospun polyacrylonitrile nanofibers and luminescent Tb-MOFs and possess the advantages of high stability, outstanding anti-interference ability, efficient detection (LOD = 98.5 ppb) and easy visual recognition. Furthermore, this MMM sensor exhibits excellent recyclability in serum, which is beneficial for developing a portable and convenient device to distinguish diclofenac in practical sensing applications. Meanwhile, the feasibility and mechanism of this recyclable sensor were verified by theory and experiments, indicating that it is a promising device for diclofenac detection in biological environments to evaluate the toxic effect caused by the accumulation of nonsteroidal drugs.

Recent Advances in the Copolymerization of Ethylene with Polar Comonomers by Nickel Catalysts

The less-expensive and earth-abundant nickel catalyst is highly promising in the copolymerization of ethylene with polar monomers and has thus attracted increasing attention in both industry and academia. Herein, we have summarized the recent advancements made in the state-of-the-art nickel catalysts with different types of ligands for ethylene copolymerization and how these modifications influence the catalyst performance, as well as new polymerization modulation strategies. With regard to α-diimine, salicylaldimine/ketoiminato, phosphino-phenolate, phosphine-sulfonate, bisphospnine monoxide, N-heterocyclic carbene and other unclassified chelates, the properties of each catalyst and fine modulation of key copolymerization parameters (activity, molecular weight, comonomer incorporation rate, etc.) are revealed in detail. Despite significant achievements, many opportunities and possibilities are yet to be fully addressed, and a brief outlook on the future development and long-standing challenges is provided.

Ruthenium-Catalyzed Diazoacetates/Cyclooctene Metathesis Copolymerization

As a powerful synthetic tool, ruthenium-catalyzed ring-opening metathesis polymerization (ROMP) has been widely utilized to prepare diverse polymers. In this contribution, we demonstrated the polymerization of cyclooctene in the presence...