Ultrastrong MXene films via the synergy of intercalating small flakes and interfacial bridging

Ultra-Compact MXene/Alginate/PVA Composite Fibers by Intercalation and Chelation for Enhanced Flame Retardancy and Energy Harvesting

MXene fibers with electro-conductivity and electrochemical properties have drawn growing research interest for its promising applications in wearable electronics, flexible electrodes, and smart textiles. However, producing MXene fibers with high strength keeps challenging because loose MXene sheets are hard to compact tightly due to electrostatic repulsion. Herein, ultra-compact MXene-based fibers are produced by intercalating alginate and polyvinyl alcohol (PVA) layers into MXene nanosheets and chelating via metal ions (i.e., Ca2+). The hydrogen and ionic bond are beneficial to compact MXene nanosheets and decrease the interplanar spacing, which improves the tensile strength. These result in MXene-based fibers with low porosity (0.2 vol%) and a high orientation factor of 0.877 exhibiting high electrical conductivity (1006 S cm‒1). In addition, flame retardancy is enhanced without smoldering owing to the synergistic effect of MXene and metal ions. Moreover, these compact MXene-based fibers with electromagnetic interference shielding, mechanical stability, acid, and alkali-resistant properties, and photo-thermal effect can be achieved for scale production. This strategy paves the way for the continuous production of compact functional fibers, applicable in flame retardant fabric, wireless communication, energy harvesting, and wearable flexible textiles.

Thermally Conductive Ti3C2Tx Fibers with Superior Electrical Conductivity

High-performance Ti3C2Tx fibers have garnered significant potential for smart fibers enabled fabrics. Nonetheless, a major challenge hindering their widespread use is the lack of strong interlayer interactions between Ti3C2Tx nanosheets within fibers, which restricts their properties. Herein, a versatile strategy is proposed to construct wet-spun Ti3C2Tx fibers, in which trace amounts of borate form strong interlayer crosslinking between Ti3C2Tx nanosheets to significantly enhance interactions as supported by density functional theory calculations, thereby reducing interlayer spacing, diminishing microscopic voids and promoting orientation of the nanosheets. The resultant Ti3C2Tx fibers exhibit exceptional electrical conductivity of 7781 S cm-1 and mechanical properties, including tensile strength of 188.72 MPa and Young's modulus of 52.42 GPa. Notably, employing equilibrium molecular dynamics simulations, finite element analysis, and cross-wire geometry method, it is revealed that such crosslinking also effectively lowers interfacial thermal resistance and ultimately elevates thermal conductivity of Ti3C2Tx fibers to 13 W m-1 K-1, marking the first systematic study on thermal conductivity of Ti3C2Tx fibers. The simple and efficient interlayer crosslinking enhancement strategy not only enables the construction of thermal conductivity Ti3C2Tx fibers with high electrical conductivity for smart textiles, but also offers a scalable approach for assembling other nanomaterials into multifunctional fibers.

Stretchable [2]rotaxane-bridged MXene films applicable for electroluminescent devices

Titanium carbide (Ti3C2TX) MXene has prominent mechanical properties and electrical conductivity. However, fabricating high-performance macroscopic films is challenging, as weak interlayer interactions limit their mechanical performance. Here, we introduce [2]rotaxane, a mechanically interlocked molecule, to enhance MXene films. Compared to pure MXene (fracture strain: 4.6%, toughness: 0.6 MJ/m3), [2]rotaxane-bridged MXene (RBM) films achieve record-high strain (20.0%) and toughness (11.9 MJ/m3) with only 3.6% [2]rotaxane by weight. Additionally, RBM films endure 500 stretch cycles (0 to 15% strain) with stable and reversible resistance alterations, making them ideal for stretchable electrodes. Notably, RBM films enable stretchable electroluminescent devices with reliable operation under 20% elongation and customizable luminescent patterns. This innovative use of mechanically interlocked molecules to cross-link MXene platelets advances MXene films and other two-dimensional materials in stretchable electronics.

Ultra-Thick Graphene Films with High Thermal Conductivity Through a Non-Stacking Strategy

The growing heat flow density from the miniaturization trend of electronic devices seriously challenges the heat diffusion in electronic systems. Consequently, there is an increasing demand for thermal management materials with both thermal conductivity (K) and material thickness (d) to effectively transfer devices' heat flux. Graphene films (GFs) with high K have attracted significant attention, but achieving both high K and large d remains challenging due to graphene's intrinsic properties and fabrication limitations. Here, a novel non-stacking strategy is proposed for fabricating monolithic thick GFs. By utilizing the ultra-small-sized graphene oxide slurry, introducing multi-line shearing, and utilizing a specially designed frame, stable and highly oriented thick films are successfully produced. These thick films eliminate the interfacial defects and enable a monolithic GF with ultra-high K over 1600 W m-1 K-1 (improved by 17.03%) when d exceeds 300 µm compared to the conventional multi-layer stacking method. While the K × d value, which represents the film's heat transfer capability, increased by 21.34% to 0.544 W K-1, the chip's operating temperature further decreased by 3.3 °C. The proposed strategy provides a promising solution to produce high-performance thick GFs and represents an effective route for heat dissipation of electronic systems.

Mechanical properties of two-dimensional material-based thin films: a comprehensive review

Two-dimensional (2D) materials are materials with a thickness of one or a few atoms with intriguing electrical, chemical, optical, electrochemical, and mechanical properties. Therefore, they are deemed candidates for ubiquitous engineering applications. Films and three-dimensional (3D) structures made from 2D materials introduce a distinct assembly structure that imparts the inherent properties of pristine 2D materials on a macroscopic scale. Acquiring the adequate strength and toughness of 2D material structures is of great interest due to their high demand for numerous industrial applications. This work presents a comprehensive review of the mechanical properties and deformation behavior of robust films composed of 2D materials that help them to attain other extraordinary properties. Moreover, the various key factors affecting the mechanical performance of such thin films, such as the lateral size of nanoflakes, fabrication technique of the film, thickness of the film, post-processing, and strain rate, are elucidated.

Large stroke radially oriented MXene composite fiber tensile artificial muscles

Actuation is normally dramatically enhanced by introducing so much yarn fiber twist that the fiber becomes fully coiled. In contrast, we found that usefully high muscle strokes and contractile work capacities can be obtained for non-twisted MXene (Ti3C2Tx) fibers comprising MXene nanosheets that are stacked in the fiber direction. The MXene fiber artificial muscles are called MFAMs. We obtained MFAMs that have high modulus in both the radial and axial directions by spinning a solution containing MXene nanosheets dispersed in an aqueous cellulose solution. We observed a highly reversible muscle contraction of 21.0% for a temperature increase from 25° to 125°C. The tensile actuation of MFAMs mainly results from reversible hydrogen bond orientation change during heating, which decreases intra-sheet spacing. The MFAMs exhibited fast, stable actuation to multiple temperature-generating stimuli, which increases their applications in smart textiles, robotic arms, and robotic grippers.

Multiscale integral synchronous assembly of cuttlebone-inspired structural materials by predesigned hydrogels

The overall structural integrity plays a vital role in the unique performance of living organisms, but the integral synchronous preparation of different multiscale architectures remains challenging. Inspired by the cuttlebone's rigid cavity-wall structure with excellent energy absorption, we develop a robust hierarchical predesigned hydrogel assembly strategy to integrally synchronously assemble multiple organic and inorganic micro-nano building blocks to different structures. The two types of predesigned hydrogels, combined with hydrogen, covalent bonding, and electrostatic interactions, are layer-by-layer assembled into brick-and-mortar structures and close-packed rigid micro hollow structures in a cuttlebone-inspired structural material, respectively. The cuttlebone-inspired structural materials gain crack growth resistance, high strength, and energy absorption characteristics beyond typical energy-absorbing materials with similar densities. This hierarchical hydrogel integral synchronous assembly strategy is promising for the integrated fabrication guidance of bioinspired structural materials with multiple different micro-nano architectures.

Comediation of voltage gating and ion charge in MXene membrane for controllable and selective monovalent cation separation

Artificial ion channels with controllable mono/monovalent cation separation fulfill important roles in biomedicine, ion separation, and energy conversion. However, it remains a daunting challenge to develop an artificial ion channel similar to biological ion channels due to ion-ion competitive transport and lack of ion-gating ability of channels. Here, we report a conductive MXene membrane with polydopamine-confined angstrom-scale channels and propose a voltage gating and ion charge comediation strategy to concurrently achieve gated and selective mono/monovalent cation separation. The membrane shows a highly switchable "on-off" ratio of ∼9.9 for K+ transport and an excellent K+/Li+ selectivity of 40.9, outperforming the ion selectivity of reported membranes with electrical gating (typically 1.5 to 6). Theoretical simulations reveal that the introduced high-charge cations such as Mg2+ enable the preferential distribution of target K+ over competing Li+ at the channel entrance, and the surface potential reduces the ionic transport energy barrier for allowing K+ to pass quickly through the channel.

Enhanced Oxidation-Resistant and Conductivity in MXene Films with Seamless Heterostructure

MXene-based films have garnered significant attention for their remarkable electrical and mechanical properties. Nevertheless, the practical application of MXene is impeded by its intrinsic instability caused by spontaneous oxidation. The traditional anti-oxidative strategies frequently lead to a compromise in stability, electrical conductivity, and mechanical properties. In this study, a novel approach is proposed involving metal nano-armoring, wherein a copper layer with nano thickness is deposited onto MXene film surfaces to establish a uniform and seamless heterogeneous interface (MXene@Cu). The precise tunability and uniformity of this heterostructure are consistently demonstrated through both theoretical calculations and experimental results. The MXene@Cu films exhibit exceptional electrical conductivity of 1.17 × 106 S m-1, electromagnetic interference shielding effectiveness of 77.1 dB, and tensile strength of 43.4 MPa. More importantly, this heterostructure significantly improves MXene's stability against oxidation. After exposure to air for 30 days, the resultant MXene@Cu films exhibit a remarkable conductivity retention of 72.0%, significantly exceeding that of pristine MXene films (44.3%). This scalable synthesis approach holds significant promise for electronic device applications, particularly in electromagnetic shielding and thermal management.

Modulating Electrochemical Energy Storage and Multi-Spectra Defense of MXenes by Interfacial Dual-Filler Engineering

MXenes have attracted growing interest in electrochemical energy storage owing to their high electronic conductivity and editable surface chemistry. Besides, rendering MXenes with spectrum defense properties further broadens their versatile applications. However, the development of MXenes suffers from weak van der Waal interaction-driven self-restacking that leads to random alignment and inferior interface microenvironments. Herein, a nacre-inspired MXene film is tailored by dual-filling of 2-ureido-4[1H]-pyrimidinone (UPy)-modified polyvinyl alcohol (PVA-UPy) and carbon nanotubes (CNTs). The dual-nanofillers engineering endows the nanocomposite film with a highly ordered structure (a Herman's order value of 0.838), a high mechanical strength (139.5 MPa), and continuous conductive pathways of both the ab plane and c-axis. As a proof-of-concept, the tailored nanocomposite film achieves a considerable capacitance of 508.2 F cm-3 and long-term cycling stability without performance degradation for 10 000 cycles. It is efficient for spectra defense in radar and infrared bands, displaying a high electromagnetic shielding capacity (19186 dB cm2 g-1) and a super-low infrared (IR) emissivity (0.16), with negligible performance decay after saving in the air for 1 year, responsible for the applications in specific and complex conditions. This interfacial dual-filler engineering concept showcases effective nanotechnology toward sustainable energy applications with a long lifetime and safety.

Dressing AgNWs with MXenes Nanosheets: Transparent Printed Electrodes Combining High-Conductivity and Tunable Work Function for High-Performance Opto-Electronics

High-work function transparent electrodes (HWFTEs) are key for establishing Schottky and Ohmic contacts with n-type and p-type semiconductors, respectively. However, the development of printable materials that combine high transmittance, low sheet resistance, and tunable work function remains an outstanding challenge. This work reports a high-performance HWFTE composed of Ag nanowires enveloped conformally by Ti3C2Tx nanosheets (TA), forming a shell-core network structure. The printed TA HWFTEs display an ultrahigh transmittance (>94%) from the deep-ultraviolet (DUV) to the entire visible spectral region, a low sheet resistance (<15 Ω sq-1), and a tunable work function ranging from 4.7 to 6.0 eV. The introduction of additional oxygen terminations on the Ti3C2Tx surface generates positive dipoles, which not only increases the work function of the TA HWFTEs but also elevates the TA/Ga2O3 Schottky barrier, resulting in a high self-powered responsivity of 18 mA W-1 in Ga2O3 diode DUV photodetectors, as demonstrated via experimental characterizations and theoretical calculations. Furthermore, the TA HWFTEs-based organic light-emitting transistors exhibit exceptional emission brightness of 5020 cd m-2, being four-fold greater than that in Au electrodes-based devices. The innovative nano-structure design, work function tuning, and the revealed mechanisms of electrode-semiconductor contact physics constitute a substantial advancement in high-performance optoelectronic technology.

Magneto-Dielectric Synergy and Multiscale Hierarchical Structure Design Enable Flexible Multipurpose Microwave Absorption and Infrared Stealth Compatibility

Developing advanced stealth devices to cope with radar-infrared (IR) fusion detection and diverse application scenarios is increasingly demanded, which faces significant challenges due to conflicting microwave and IR cloaking mechanisms and functional integration limitations. Here, we propose a multiscale hierarchical structure design, integrating wrinkled MXene IR shielding layer and flexible Fe3O4@C/PDMS microwave absorption layer. The top wrinkled MXene layer induces the intensive diffuse reflection effect, shielding IR radiation signals while allowing microwave to pass through. Meanwhile, the permeable microwaves are assimilated into the bottom Fe3O4@C/PDMS layer via strong magneto-electric synergy. Through theoretical and experimental optimization, the assembled stealth devices realize a near-perfect stealth capability in both X-band (8-12 GHz) and long-wave infrared (8-14 µm) wavelength ranges. Specifically, it delivers a radar cross-section reduction of - 20 dB m2, a large apparent temperature modulation range (ΔT = 70 °C), and a low average IR emissivity of 0.35. Additionally, the optimal device demonstrates exceptional curved surface conformability, self-cleaning capability (contact angle ≈ 129°), and abrasion resistance (recovery time ≈ 5 s). This design strategy promotes the development of multispectral stealth technology and reinforces its applicability and durability in complex and hostile environments.

MoS2 Lubricate-Toughened MXene/ANF Composites for Multifunctional Electromagnetic Interference Shielding

The design and fabrication of high toughness electromagnetic interference (EMI) shielding composite films with diminished reflection are an imperative task to solve electromagnetic pollution problem. Ternary MXene/ANF (aramid nanofibers)-MoS2 composite films with nacre-like layered structure here are fabricated after the introduction of MoS2 into binary MXene/ANF composite system. The introduction of MoS2 fulfills an impressive "kill three birds with one stone" improvement effect: lubrication toughening mechanical performance, reduction in secondary reflection pollution of electromagnetic wave, and improvement in the performance of photothermal conversion. After the introduction of MoS2 into binary MXene/ANF (mass ratio of 50:50), the strain to failure and tensile strength increase from 22.1 ± 1.7% and 105.7 ± 6.4 MPa and to 25.8 ± 0.7% and 167.3 ± 9.1 MPa, respectively. The toughness elevates from 13.0 ± 4.1 to 26.3 ± 0.8 MJ m-3 (~ 102.3%) simultaneously. And the reflection shielding effectiveness (SER) of MXene/ANF (mass ratio of 50:50) decreases ~ 10.8%. EMI shielding effectiveness (EMI SE) elevates to 41.0 dB (8.2-12.4 GHz); After the introduction of MoS2 into binary MXene/ANF (mass ratio of 60:40), the strain to failure increases from 18.3 ± 1.9% to 28.1 ± 0.7% (~ 53.5%), the SER decreases ~ 22.2%, and the corresponding EMI SE is 43.9 dB. The MoS2 also leads to a more efficient photothermal conversion performance (~ 45 to ~ 55 °C). Additionally, MXene/ANF-MoS2 composite films exhibit excellent electric heating performance, quick temperature elevation (15 s), excellent cycle stability (2, 2.5, and 3 V), and long-term stability (2520 s). Combining with excellent mechanical performance with high MXene content, electric heating performance, and photothermal conversion performance, EMI shielding ternary MXene/ANF-MoS2 composite films could be applied in many industrial areas. This work broadens how to achieve a balance between mechanical properties and versatility of composites in the case of high-function fillers.

Scalable ultrastrong MXene films with superior osteogenesis

Titanium carbide MXene flakes have promising applications in aerospace, flexible electronic devices and biomedicine owing to their superior mechanical properties1 and electrical conductivity2 and good photothermal conversion3, biocompatibility4 and osteoinductivity5. It is highly desired yet very challenging to assemble MXene flakes into macroscopic high-performance materials in a scalable manner. Here we demonstrate a scalable strategy to fabricate high-performance MXene films by roll-to-roll-assisted blade coating (RBC) integrated with sequential bridging, providing good photothermal conversion and osteogenesis efficiency under near-infrared irradiation. MXene flakes were first bridged with silk sericin by hydrogen bonding and then assembled into macroscopic films using a continuous RBC process, followed by ionic bridging to freeze their aligned structure. The resultant large-scale MXene films with strong interlayer interactions are highly aligned and densified, exhibiting high tensile strength (755 MPa), toughness (17.4 MJ m-3) and electromagnetic interference (EMI) shielding capacity (78,000 dB cm2 g-1), as well as good ambient stability, photothermal conversion and bone regeneration performance. The proposed strategy not only paves a feasible way for realizing the practical applications of MXene in the fields of flexible EMI shielding materials and bone tissue engineering but also provides an avenue for the high-performance and scalable assembly of other two-dimensional flakes.

Is Low Polydispersity Always Beneficial? Exploring the Impact of Size Polydispersity on the Microstructure and Rheological Properties of Graphene Oxide

Graphene oxide (GO) is a promising material widely utilized in advanced materials engineering, such as in the development of soft robotics, sensors, and flexible devices. Considering that GOs are often processed using solution-based methods, a comprehensive understanding of the fundamental characteristics of GO in dispersion states becomes crucial given their significant influence on the ultimate properties of the device. GOs inherently exhibit polydispersity in solution, which plays a critical role in determining the mechanical behavior and flowability. However, research in the domain of 2D colloids concerning the effects of GO's polydispersity on its rheological properties and microstructure is relatively scant. Consequently, gaining a comprehensive understanding of how GO's polydispersity affects these critical aspects remains a pressing concern. In this study, we aim to investigate the dispersions and structure of GOs and clarify the effect of polydispersity on the rheological properties and yielding behavior. Using a rheometer, polarized optical microscopy, and small-angle X-ray scattering, we found that higher polydispersity in the same average size leads to overall improved rheological properties and higher flowability during yielding. Thus, our study can be beneficial in the employment of polydispersity in the processing of GO such as 3D printing and fiber spinning.

Reversible Stacking and Delamination-Regulation of MXene via Controlled Freezing

MXene's configuration, whether it is aggregated or dispersed in a monolayer, determines the specific application areas and even greatly influences the intrinsic properties of MXene. However, how to desirably control MXene's configuration is challenging. Here, a simple, additive-free, chemical reaction-free, and scalable strategy to optionally and reversibly regulate MXene's ordered stacking and delamination of MXene aggregates (AM) is reported. Just by controlled freezing of MXene aqueous dispersions, the aggregation percentage, delamination percentage, and interlayer spacing of AM can be finely tuned. Experimental results reveal that the freezing-induced aggregation and delamination effects can be explained by the squeezing action of growing ice grains on the MXene excluded/concentrated between ice grains and the expanding action caused by the ice formation between AM lamellae, respectively. The dominance between them depends on the freezing parameter-influenced ice nucleation sites, numbers, and ice grain sizes. This work not only contributes to the preparation, storage, and practical applications of MXene, but also opens a new and green avenue for controlling materials' assembly structures.

Ultrastrong MXene film induced by sequential bridging with liquid metal

Assembling titanium carbide (Ti3C2Tx) MXene nanosheets into macroscopic films presents challenges, including voids, low orientation degree, and weak interfacial interactions, which reduce mechanical performance. We demonstrate an ultrastrong macroscopic MXene film using liquid metal (LM) and bacterial cellulose (BC) to sequentially bridge MXene nanosheets (an LBM film), achieving a tensile strength of 908.4 megapascals. A layer-by-layer approach using repeated cycles of blade coating improves the orientation degree to 0.935 in the LBM film, while a LM with good deformability reduces voids into porosity of 5.4%. The interfacial interactions are enhanced by the hydrogen bonding from BC and the coordination bonding with LM, which improves the stress-transfer efficiency. Sequential bridging provides an avenue for assembling other two-dimensional nanosheets into high-performance materials.

Supertough MXene/Sodium Alginate Composite Fiber Felts Integrated with Outstanding Electromagnetic Interference Shielding and Heating Properties

The development of multifunctional MXene-based fabrics for smart textiles and portable devices has garnered significant attention. However, very limited studies have focused on their structure design and associated mechanical properties. Here, the supertough MXene fiber felts composed of MXene/sodium alginate (SA) fibers were fabricated. The fracture strength and bending stiffness of felts can be up to 97.8 MPa and 1.04 N mm2, respectively. Besides, the fracture toughness of felts was evaluated using the classic Griffith theory, yielding to a critical stress intensity factor of 1.79 M P a m . In addition, this kind of felt presents outstanding electrothermal conversion performance (up to 119 °C at a voltage of 2.5 V), high cryogenic and high-temperature tolerance of photothermal conversion performance (-196 to 160 °C), and excellent electromagnetic interference (EMI) shielding effectiveness (54.4 dB in the X-band). This work provides new structural design concepts for high-performance MXene-based textiles, broadening their future applications.

Achieving ultrahigh uranium/vanadium selectivity of poly(amidoxime) via coupling MXene-enabled strong intermolecular interaction and separated photothermal interface

Poly(amidoxime) (PAO) has been recognized as the most potential candidate for extracting uranium from seawater, owing to its merits of outstanding uranium affinity, low cost, and large-scale production. Despite remarkable achievements, existing PAO sorbents suffer from unsatisfactory uranium extraction efficiency and selectivity, as imposed by the inherently sluggish uranium adsorption kinetics and inevitable spatial configuration transition of amidoxime, which diminishes uranium affinity. Herein, we discover a facile and integrated design to elaborate a PAO/MXene nanocomposite that delivers ultrahigh and durable uranium/vanadium (U/V) selectivity. The key to our design lies in harnessing MXene-enabled strong intermolecular interactions to PAO to minimize the spatial configuration transition of amidoxime and stabilizing its superior uranium affinity, as well as creating a separated photothermal interface to maximize temperature-strengthened affinity for uranium over vanadium. Such a synergetic effect allows the nanocomposite to acquire over a 4-fold improvement in U/V selectivity compared to that of pure PAO as well as an unprecedented distribution coefficient of uranium compared to most state-of-the-art sorbents. We further demonstrate that our nanocomposite exhibits durable U/V selectivity with negligible attenuation and good antibacterial ability even in long-term operation. The design concept and extraordinary performance in this study bring PAO-based sorbents a step closer to practical uranium extraction from seawater.

Large-Scale, Mechanically Robust, Solvent-Resistant, and Antioxidant MXene-Based Composites for Reliable Long-Term Infrared Stealth

MXene-based thermal camouflage materials have gained increasing attention due to their low emissivity, however, the poor anti-oxidation restricts their potential applications under complex environments. Various modification methods and strategies, e.g., the addition of antioxidant molecules and fillers have been developed to overcome this, but the realization of long-term, reliable thermal camouflage using MXene network (coating) with excellent comprehensive performance remains a great challenge. Here, a MXene-based hybrid network comodified with hyaluronic acid (HA) and hyperbranched polysiloxane (HSi) molecules is designed and fabricated. Notably, the presence of appreciated HA molecules restricts the oxidation of MXene sheets without altering infrared stealth performance, superior to other water-soluble polymers; while the HSi molecules can act as efficient cross-linking agents to generate strong interactions between MXene sheets and HA molecules. The optimized MXene/HA/HSi composites exhibit excellent mechanical flexibility (folded into crane structure), good water/solvent resistance, and long-term stable thermal camouflage capability (with low infrared emissivity of ≈0.29). The long-term thermal camouflage reliability (≈8 months) under various outdoor weathers and the scalable coating capability of the MXene-coated textile enable them to disguise the IR signal of various targets in complex environments, indicating the great promise of achieved material for thermal camouflage, IR stealth, and counter surveillance.

Porifera-Inspired Lightweight, Thin, Wrinkle-Resistance, and Multifunctional MXene Foam

Transition metal carbides/nitrides (MXenes) demonstrate a massive potential in constructing lightweight, multifunctional wearable electromagnetic interference (EMI) shields for application in various fields. Nevertheless, it remains challenging to develop a facile, scalable approach to prepare the MXene-based macrostructures characterized by low density, low thickness, high mechanical flexibility, and high EMI SE at the same time. Herein, the ultrathin MXene/reduced graphene oxide (rGO)/Ag foams with a porifera-inspired hierarchically porous microstructure are prepared by combining Zn2+ diffusion induction and hard template methods. The hierarchical porosity, which includes a mesoporous skeleton and a microporous MXene network within the skeleton, not only exerts a regulatory effect on stress distribution during compression, making the foams rubber-like resistant to wrinkling but also provides more channels for multiple reflections of electromagnetic waves. Due to the interaction between Ag nanosheets, MXene/rGO, and porous structure, it is possible to produce an outstanding EMI shielding performance with the specific surface shielding effectiveness reaching 109152.4 dB cm2 g-1. Furthermore, the foams exhibit multifunctionalities, such as transverse Joule heating, longitudinal heat insulation, self-cleaning, fire resistance, and motion detection. These discoveries open up a novel pathway for the development of lightweight MXene-based materials with considerable application potential in wearable electromagnetic anti-interference devices.

Revealing Surface/Interface Chemistry of the Ordered Aramid Nanofiber/MXene Structure for Infrared Thermal Camouflage and Electromagnetic Interference Shielding

The past decade has witnessed the advances of infrared (IR) thermal camouflage materials, but challenges remain in breaking the trade-off nature between emissivity and mechanical properties. In response, we identify the key role of a moderate reprotonation rate in the aramid nanofiber (ANF)/MXene film toward a surface-to-bulk alignment. Theoretical simulation demonstrates that the ordered ANF/MXene surface eliminates the local high electric field by field confinement and localization, responsible for the low IR emissivity. By scrutinizing the surface/interface chemistry, the processing optimization is achieved to develop an ordered and densely stacked ANF/MXene film, which features a low emissivity of 16%, accounting for sound IR thermal camouflage performances including a wide camouflage temperature range of 50-200 °C, a large reduction in radiation temperature from 200.5 to 63.6 °C, and long-term stability. This design also enables good mechanical performance such as a tensile strength of 190.8 MPa, a toughness of 12.1 MJ m-3, and a modulus of 7.9 GPa, responsible for better thermal camouflage applications. The tailor-made ANF/MXene film further attains an electromagnetic interference (EMI) shielding effectiveness (40.4 dB) in the X-band, manifesting its promise for IR stealth compatible EMI shielding applications. This work will shed light on the dynamic topology reconstruction of camouflage materials for boosting thermal management technology.

Synergistic advancements in high-performance flexible capacitive pressure sensors: structural modifications, AI integration, and diverse applications

The development of flexible pressure sensors for monitoring human motion and physiological signals has attracted extensive scientific research. However, achieving low monitoring limits, a wide detection range, large bending stresses, and excellent mechanical stability simultaneously remains a serious challenge. With the aim of developing a high-performance capacitive pressure sensor (CPS), this paper introduces the successful preparation of a single-walled carbon nanotube (SWNT)/polydimethylsiloxane (S-PDMS) composite dielectric with a foam-like structure (high permittivity and low elasticity modulus) and MXene/SWNT (S-MXene) composite film electrodes with a micro-crumpled structure. The above structurally modified CPS (SMCPS) demonstrated an excellent response output during pressure loading, achieving a wide pressure detection range (up to 700 kPa), a low detection limit (16.55 Pa), fast response/recovery characteristics (48/60 ms), enhanced sensitivity across a wide pressure range, long-term stability under repeated heavy loading and unloading (40 kPa, >2000 cycles), and reliable performance under various temperature and humidity conditions. The SMCPS demonstrated a precise and stable capacitive response in monitoring subtle physiological signals and detecting motion, owing to its unique electrode structure. The flexible device was integrated with an Internet of Things module to create a smart glove system that enables real-time tracking of dynamic gestures. This system demonstrates exceptional performance in gesture recognition and prediction with artificial intelligence analysis, highlighting the potential of the SMCPS in human-machine interface applications.

Water-induced strong isotropic MXene-bridged graphene sheets for electrochemical energy storage

Graphene and two-dimensional transition metal carbides and/or nitrides (MXenes) are important materials for making flexible energy storage devices because of their electrical and mechanical properties. It remains a challenge to assemble nanoplatelets of these materials at room temperature into in-plane isotropic, free-standing sheets. Using nanoconfined water-induced basal-plane alignment and covalent and π-π interplatelet bridging, we fabricated Ti3C2Tx MXene-bridged graphene sheets at room temperature with isotropic in-plane tensile strength of 1.87 gigapascals and moduli of 98.7 gigapascals. The in-plane room temperature electrical conductivity reached 1423 siemens per centimeter, and volumetric specific capacity reached 828 coulombs per cubic centimeter. This nanoconfined water-induced alignment likely provides an important approach for making other aligned macroscopic assemblies of two-dimensional nanoplatelets.

Robust and Multifunctional Ti3 C2 Tx /Modified Sawdust Composite Paper for Electromagnetic Interference Shielding and Wearable Thermal Management

Robust, ultrathin, and environmental-friendliness papers that synergize high-efficiency electromagnetic interference (EMI) shielding, personal thermal management, and wearable heaters are essential for next-generation smart wearable devices. Herein, MXene nanocomposite paper with a nacre-like structure for EMI shielding and electrothermal/photothermal conversion is fabricated by vacuum filtration of Ti3 C2 Tx MXene and modified sawdust. The hydrogen bonding and highly oriented structure enhance the mechanical properties of the modified sawdust/MXene composite paper (SM paper). The SM paper with 50 wt% MXene content shows a strength of 23 MPa and a toughness of 13 MJ·M-3 . The conductivity of the SM paper is 10 195 S·m-1 , resulting in an EMI shielding effectiveness (SE) of 67.9 dB and a specific SE value (SSE/t) of 8486 dB·cm2 ·g-1 . In addition, the SM paper exhibits excellent thermal management performance including high light/electro-to-thermal conversion, rapid Joule heating and photothermal response, and sufficient heating stability. Notably, the SM paper exhibits low infrared emissivity and distinguished infrared stealth performance, camouflaging a high-temperature heater surface of 147-81 °C. The SM-based e-skin achieves visualization of Joule heating and realizes human motions monitoring. This work presents a new strategy for designing MXene-based wearable devices with great EMI shielding, artificial intelligence, and thermal management applications.

Reinforcing and toughening bacterial cellulose/MXene films assisted by interfacial multiple cross-linking for electromagnetic interference shielding and photothermal response

Ultrathin MXene composite films, with their flexibility, metal-level conductivity, and multifunction compatibility, are an ideal choice for electromagnetic interference (EMI) shielding materials in future developments. Nonetheless, the dilemma between electrical conductivity and robustness in these composite films remains a challenge. Herein, an ammonium polyphosphate (APP) assisted interfacial multiple cross-linking strategy, achieved via simple solution blending and filtration, was employed to reinforce and toughen the "brick-mortar" layered MXene/bacterial cellulose (MBCA) films without compromising their conductivity and EMI shielding ability. The introduction of a small amount of APP leads to multiple interfacial interactions between MXene and bacterial cellulose, resulting in significant enhancements in mechanical strength (360.8 MPa), Young's modulus (2.8 GPa), fracture strain (17.3%), and toughness (34.1 MJ/m3). Concurrently, the MBCA film displayed satisfactory conductivity values of 306.7 S/cm and an EMI SE value of 41 dB upon optimizing the MXene content. Additionally, the MBCA film demonstrated a consistent, rapid-response photothermal conversion capability, achieving a photothermal conversion temperature of 97 °C under a light intensity of 200 mW/m2. Consequently, this tough and multifunctional EMI shielding film holds substantial promise for protecting electronic equipment.

Liquid metal assisted fabrication of MXene-based films: Toward superior electromagnetic interference shielding and thermal management

The development of thin and flexible films that possess both electromagnetic interference (EMI) shielding and thermal management capabilities has always been an intriguing pursuit, but itisnevertheless a crucialproblemtoaddress. Inspired by the deformability of liquid metal (LM) and film forming capacity of MXene, here we present a series of ternary compositing films prepared via cellulose nanofiber (CNF) assisted vacuum filtration technology. Originating from the highly conductive LM/MXene network, the MLMC film presents a maximum EMI shielding effectiness (EMI SE) of 78 dB at a tiny thickness of 45 μm, together with a high specific EMI SE of 3046 dB mm-1. Meanwhile, these compositing films also deliver excellent flexibility and mechanical reliability, showing no obvious decline in EMI shielding performance even after 1000 bending and 500 folding cycles, respectively. Moreover, notable anisotropic thermal conductive property was successfully achieved, allowing for a highly desirable in-plane thermal conductivity of 7.8 W m-1 K-1. This accomplishment also yielded an exceptional electro-thermal conversion capacity, enabling efficient low-voltage (3 V) heating capabilities. These captivating features are expected to greatly drive the widespread adoption of LM-based films in future flexible electronic and wearable technologies.

Preparation of High Conductive Medium and Establishment of Laege Capacity Conductive Channel

The preparation of highly conductive media and the construction of conducting channels play a crucial role in improving the electrical conductivity of electrically conductive adhesives. Therefore, a new MXene structure is reported in this paper, and the improved structure is rationally designed by computational modeling, which greatly prevents the buildup of MXene nanosheets, improves the stability of the structure, and creates a wide electron transfer channel, and the capacitance contribution of this structure is up to 86.3%. By mixing MXene modified with Ag-plated copper powder in a quantitative relationship to form high conductive media, the electrical conductivity is largely improved and the defect of low electron transfer rate of conventional conductive fillers is broken. The potential value of high conductive media is largely exploited using high throughput and machine learning methods, and here we show that the resistivity has reached 9.668 × 10-7 Ω m. The first principles investigate the conductive channels and electron transfer pathways of high-conductive media at the atomic level, further revealing the mechanism of action of high-conductive media. This study is also the first report on the application of MXene to high-conductive media.

Thin lamellar films with enhanced mechanical properties for durable radiative cooling

Passive daytime radiative cooling is a promising path to tackle energy, environment and security issues originated from global warming. However, the contradiction between desired high solar reflectivity and necessary applicable performance is a major limitation at this stage. Herein, we demonstrate a "Solvent exchange-Reprotonation" processing strategy to fabricate a lamellar structure integrating aramid nanofibers with core-shell TiO2-coated Mica microplatelets for enhanced strength and durability without compromising optical performance. Such approach enables a slow but complete two-step protonation transition and the formation of three-dimensional dendritic networks with strong fibrillar joints, where overloaded scatterers are stably grasped and anchored in alignment, thereby resulting in a high strength of ~112 MPa as well as excellent environmental durability including ultraviolet aging, high temperature, scratches, etc. Notably, the strong backward scattering excited by multiple core-shell and shell-air interfaces guarantees a balanced reflectivity (~92%) and thickness (~25 μm), which is further revealed by outdoor tests where attainable subambient temperature drops are ~3.35 °C for daytime and ~6.11 °C for nighttime. Consequently, both the cooling capacity and comprehensive outdoor-services performance, greatly push radiative cooling towards real-world applications.

External field-assisted techniques for polymer matrix composites with electromagnetic interference shielding

The rapid development of mobile devices has greatly improved the lives of people, but they have also caused problems with electromagnetic interference (EMI) and information security. Therefore, there is an urgent need to develop high performance EMI shielding materials to suppress electromagnetic radiation and prevent information leakage. Some reports point out that the self-orientation behavior of fillers under external forces contributes to the improvement of EMI shielding performance. So how to construct an effective filler orientation structure in the polymer matrix is becoming a hot topic in the research of EMI shielding materials. In view of the fact that there are few reports on the preparation of polymer matrix EMI shielding composites by external field induction, from this perspective, we first highly focus on strategies for the construction of conductive networks within composites based on external field induction. Subsequently, the research progress on the preparation of polymer matrix EMI shielding composites by inducing the orientation of inorganic fillers through external fields, including temperature, electrostatic, gravity, mechanical force and magnetic fields, is organized and sorted out in detail. Notably, the particular response relationship between the unique composite structures prepared by external field induction and the incident electromagnetic waves is further dissected. Finally, the key scientific problems that need to be solved in the preparation of polymer matrix EMI shielding composites assisted by external fields are proposed. The approach discussed and the strategies proposed are expected to provide some guidance for the innovative design of high-performance polymer matrix EMI shielding composites.

Ultra-Uniform and Functionalized Nano-Ion Divider for Regulating Ion Distribution toward Dendrite-Free Lithium-Metal Batteries

Ionic dividers with uniform pores and functionalized surfaces display significant potential for solving Li-dendrite issues in Li-metal batteries. In this study, single metal and nitrogen co-doped carbon-sandwiched MXene (M-NC@MXene) nanosheets are designed and fabricated, which possess highly ordered nanochannels with a diameter of ≈10 nm. The experiments and computational calculations verified that the M-NC@MXene nanosheets eliminate Li dendrites in several ways: (1) redistributing the Li-ion flux via the highly ordered ion channels, (2) selectively conducting Li ions and anchoring anions by heteroatom doping to extend the nucleation time for Li dendrites, and (3) tightly staggering on a routine polypropylene (PP) separator to obstruct the growth path of Li dendrites. With a Zn-NC@MXene-coated PP divider, the assembled Li||Li symmetric battery shows an ultralow overpotential of ≈25 mV and a cycle life of 1500 h at a high current density of 3 mA cm-2 and high capacity of 3 mAh cm-2 . Remarkably, the life of a Li||Ni83 pouch cell with an energy density of 305 Wh kg-1 is improved by fivefold. Moreover, the remarkable performance of Li||Li, Li||LiFePO4 , and Li||sulfur batteries reveal the significant potential of the well-designed multifunctional ion divider for further practical applications.

Structural design and preparation of Ti3C2Tx MXene/polymer composites for absorption-dominated electromagnetic interference shielding

Electromagnetic interference (EMI) is a pervasive and harmful phenomenon in modern society that affects the functionality and reliability of electronic devices and poses a threat to human health. To address this issue, EMI-shielding materials with high absorption performance have attracted considerable attention. Among various candidates, two-dimensional MXenes are promising materials for EMI shielding due to their high conductivity and tunable surface chemistry. Moreover, by incorporating magnetic and conductive fillers into MXene/polymer composites, the EMI shielding performance can be further improved through structural design and impedance matching. Herein, we provide a comprehensive review of the recent progress in MXene/polymer composites for absorption-dominated EMI shielding applications. We summarize the fabrication methods and EMI shielding mechanisms of different composite structures, such as homogeneous, multilayer, segregated, porous, and hybrid structures. We also analyze the advantages and disadvantages of these structures in terms of EMI shielding effectiveness and the absorption ratio. Furthermore, we discuss the roles of magnetic and conductive fillers in modulating the electrical properties and EMI shielding performance of the composites. We also introduce the methods for evaluating the EMI shielding performance of the materials and emphasize the electromagnetic parameters and challenges. Finally, we provide insights and suggestions for the future development of MXene/polymer composites for EMI shielding applications.

Nacre-Inspired Strong MXene/Cellulose Fiber with Superior Supercapacitive Performance via Synergizing the Interfacial Bonding and Interlayer Spacing

MXene fibers are promising candidates for weaveable and wearable energy storage devices because of their good electrical conductivity and high theoretical capacitance. Herein, we propose a nacre-inspired strategy for simultaneously improving the mechanical strength, volumetric capacitance, and rate performance of MXene-based fibers through synergizing the interfacial interaction and interlayer spacing between Ti₃C₂T_X nanosheets. The optimized hybrid fibers (M-CMC-1.0%) with 99 wt % MXene loading exhibit an improved tensile strength of ∼81 MPa and a high specific capacitance of 885.0 F cm^-3 at 1 A cm^-3 together with an outstanding rate performance of 83.6% retention at 10 A cm^-3 (740.0 F cm^-3). As a consequence, the fiber supercapacitor (FSC) based on the M-CMC-1.0% hybrid delivers an output capacitance of 199.5 F cm^-3, a power density of 1186.9 mW cm^-3, and an energy density of 17.7 mWh cm^-3, respectively, implying its promising applications as portable energy storage devices for future wearable electronics.