Synthesis of propenone-linked covalent organic frameworks via Claisen-Schmidt reaction for photocatalytic removal of uranium

Constructing asymmetric D'-A-D" imine covalent organic frameworks to optimize exciton effect and enhance photocatalytic reduction of U(VI)

Imine-based covalent organic frameworks (COFs) exhibit high exciton binding energies due to their weaker electronic delocalization. Herein, we report an asymmetric ternary imine COF (NCOF-3) bridged by D2 h and C2 h units, which is synthesized via an aldol-type condensation reaction mediated by amine monomers. Compared to symmetric NCOF-1 and NCOF-2, the asymmetric architecture of NCOF-3 maximizes interlayer interactions, leading to enhance crystallinity. Moreover, by incorporating two electron-donating units into the triazine framework, an asymmetric D'-A-D'' topological structure is formed, which facilitates the forward dissociation of photogenerated excitons, achieving a high carrier separation efficiency. Temperature-dependent fluorescence spectroscopy reveals that NCOF-3 possesses a smaller exciton binding energy (40.15 meV) compared to those of symmetric imine-based COFs. Under illumination conditions, NCOF-3 exhibits uranium removal capacity of 1084 mg g-1, significantly surpassing those of binary COFs containing imine bonds. Additionally, anti-interference experiments demonstrate that NCOF-3 maintains a uranium removal efficiency of over 90 % even in the presence of excess competing metal ions, confirming its high selectivity. Density functional theory (DFT) calculations indicate that lattice dipole asymmetry plays crucial roles in reducing the electronic bandgap of NCOF-3. This work highlights the importance of designing and fabricating imine-based COFs with dipole asymmetry of the connecting components to effectively manipulate the internal charge distribution, ultimately enhancing photocatalytic activity.

Linkages Chemistry of Covalent Organic Frameworks in Photocatalysis and Electrocatalysis

Covalent organic frameworks (COFs) have emerged as promising candidates for electrocatalysis and photocatalysis applications due to their structurally ordered architectures and tunable physicochemical properties. In COFs, organic building blocks are linked via covalent bonds, and the structural and electronic characteristics of COFs are critically governed by their linkage chemistry. These linkages influence essential material attributes including surface area, crystallinity, hydrophobicity, chemical stability, and the optoelectronic behavior (e.g., photoelectron separation efficiency, electron conductivity, and reductive activity), which collectively determine catalytic performance in energy conversion systems. A systematic understanding of linkage engineering in COFs not only advances synthetic methodologies but also provides innovative solutions to global energy and environmental challenges, thereby accelerating the development of sustainable technologies for clean energy production and environmental remediation.

Boronate affinity molecularly imprinted covalent organic framework for highly selective recognition and extraction of zearalenone

Selective and sensitive determination of zearalenone (ZEN) in food matrices is crucial for risk assessment and mycotoxin control due to its high toxicity. Herein, we introduce a boron affinity molecularly imprinted covalent organic framework (BA-MICOF) for selective extraction of ZEN from cereal. The Povarov reaction was employed for one-pot synthesis of boric acid incorporated COF (BA-COF) to avoid complex post-modification. BA-COF was then used to prepare BA-MICOF via a boron affinity imprinting strategy. The specific interaction between ZEN and BA-MICOF, involving hydrogen bonding and boron affinity, endows BA-MICOF with superior selectivity (imprinting factor of 10.8). Subsequently, a BA-MICOF based solid-phase extraction method was developed for high-performance liquid chromatography (HPLC) determination of ZEN. The method gave a low detection limit (0.26 μg kg-1), good recovery (89.3 %-106 %), and precision (RSD 1.8 %-5.4 %). The combination of boron affinity imprinting and porous frameworks presents a promising approach for selective capture of contaminants in food matrices.

Stable Flavone-Linked Covalent Organic Frameworks for High-Performance Lithium-ion Battery Anodes

The design and synthesis of stable and efficient anode materials for organic lithium-ion batteries (LIBs) are critical for achieving environmental sustainability. Herein, a flavone-linked covalent organic framework (FV-COF) with high crystallinity is synthesized via a cascade reaction based on the Claisen-Schmidt condensation for anodes of LIBs. The incorporation of an oxygen-rich flavonoid structure and a fully conjugated framework endows FV-COF with exceptional physicochemical stability and reversible redox capacity. Thus, FV-COF demonstrates exceptional performance as an anode material, delivering a high steady-state capacity of 1136.8 mA h g-1 after ten cycles at 0.1 A g-1 and excellent rate capability. In particular, the cyclic stability of FV-COF retained a capacity of 546.5 mAh g-1 at 5.0 A g-1 after 10 000 cycles, accompanied by a Coulombic efficiency exceeding 98%. This work demonstrates that COFs with rich redox site and stable linkages are promising candidates for developing lightweight batteries.

Heteroatom-Synergistic Effect on Anchoring Polysulfides In Chalcone-Linked Nanographene Covalent Organic Frameworks for High-Performance Li─S Batteries

Lithium-sulfur (Li─S) batteries are an attractive option for future energy storage devices because they offer higher theoretical specific capacity, energy density, and cost-effectiveness than commercial lithium-ion batteries. However, the practical applications of Li─S batteries are significantly limited by the shuttle effect caused by intermediate lithium polysulfides (LiPSs) and slow redox kinetics. In this study, the molecular engineering of chalcone-linked, sp2-bonded nanographene-type covalent organic frameworks (COFs) as sulfur hosts is reported to enhance interactions with LiPSs, thereby effectively suppressing the shuttle effect. The developed sulfur-hosting cathode material demonstrated outstanding battery performance, surpassing most reported materials by achieving a specific capacity of 1228 mA h g-1 at 0.5C, with 80% retention after 500 cycles and an average Coulombic Efficiency (C.E.) of 99%. Additionally, the mechanisms of sulfur immobilization, the subsequent conversion into lithium polysulfides (LiPSs), and their binding energies with COFs are investigated using density functional theory (DFT) calculations. These findings offer valuable insights into the structure-property relationships essential for developing more efficient sulfur-hosting cathodes.

Biplane Ion-Pairing Induced Supramolecular Assembly for High-Performance Uranium Detection

It is still challenging to directly recognize the anionic species [UO2(CO3)3]4-, the dominant species in the environment (82%-93%), using current optical probes because of the adverse effects of its thick hydration shell on binding interactions. In this study, a water-soluble Pt(II) methylated terpyridine complex ([Pt(CH3-tpy)NCO]+) supramolecular probe is designed to directly target [UO2(CO3)3]4- by a new strategy of thick hydration shell overlapping arrangement. The optical response demonstrates excellent selectivity among ≈30 investigated interfering substances, along with rapid response (≈15 s), high sensitivity (64.1 nm) and dual-signals. It is confirmed both experimentally and theoretically that the superior detection performance is attributed to the formation of a unique supramolecular structure featuring biplane-like building block, bicolumnar stacking and water-bridged anionic networks, via the overlap of thick hydration shells of aligned [UO2(CO3)3]4- to boost a superentropic driving force, and the distinguishable dual-signals arises from the emergence of four types of Pt-Pt interactions, generating low-energy metal-to-metal charge transfer adsorption/emission. In addition, a [Pt(CH3-tpy)NCO]+-based hydrogel platform is constructed for detecting both anionic and cationic uranium, with a detection limit of 14.89 fg. This work unlocks not only a way to directly detect [UO2(CO3)3]4-, but also a new idea for sensing ions with extreme thick hydration layers.

Phosphoryl-Graphene for High-Efficiency Uranium Separation and Recycling

To enhance the sustainability of nuclear energy and protect the environment, the efficient extraction of uranium from various water sources has emerged as an essential strategy for addressing the long-term challenges of nuclear waste management. In this study, we designed phosphoryl-functionalized graphene (PG) for efficient uranyl adsorption and synthesized the material from fluorinated graphene using phosphoryl ethanolamine under solvothermal conditions. The resultant PG features a unique 2D structure equipped with solvent-exposed phosphoryl groups, making it highly suitable for uranium adsorption in aqueous solutions. Notably, PG demonstrated a high sorption efficiency (∼77%) with rapid extraction capability (∼5 min) for U(VI) from aqueous media at pH 7, achieving an adsorption capacity of 316 mg U g-1. It also demonstrates good recyclability and stability even after 3 cycles and exhibits a significant seawater adsorption capacity of 117.8 mg U g-1. Both X-ray photoelectron spectroscopy analysis and molecular dynamics simulations revealed a preferential binding of uranyl ions to the phosphoryl groups of PG. This work paves the way for designing and developing functional graphene derivatives for efficient uranium extraction from various water resources, with promising potential for the recovery of other radioactive elements.

Electron-deficient two-dimensional poly(arylene vinylene) covalent organic frameworks: efficient synthesis and host-guest interaction

Crystalline and porous 2D poly(arylene vinylene)s (2D PAVs), i.e. vinylene-linked 2D conjugated covalent organic frameworks, represent promising materials for electronic and electrochemical applications. Chemically robust 2D PAVs with strong electron affinity are highly desirable for effective host-guest charge transfer to achieve enhanced device performance. Herein, we report the efficient synthesis and host-guest interaction of two novel 2D PAVs incorporating electron-deficient bipyrazine units with a N-free 2D PAV as a reference. They are crystalline and chemically robust. Various spectroscopies coupled with theoretical calculations indicate that the abundant N sites boost the electron affinity of 2D PAVs. We test their efficiency in hosting guest sulfur species and find that the electron-deficient materials help to physically confine and stabilize sulfur/polysulfide (e.g., Li2S6) molecules with facilitated intermolecular charge transfer in the porous channels. As a result, using sulfur encapsulated by 2D PAVs as electrode materials, we achieve high specific capacities with excellent capacity retention after 200 charge-discharge cycles for Li-sulfur batteries.

Construction of carbazole-conjugated dual-emission fluorescent covalent organic framework for distinguishing p-nitroaniline/p-nitrophenol and adsorbing nitroanilines/nitrophenols

Nitroanilines (NAs) and nitrophenols (NPs), crucial industrial raw materials, are extensively utilized across various sectors. However, the environmental pollution and health hazards stemming from their usage are significant, necessitating urgent monitoring and removal to address environmental and safety concerns. The challenge is further compounded by the presence of NAs/NPs isomers, making the selective analysis of specific isomers crucial. In response, a new post-modified fluorescent covalent organic framework (COF) termed COF@CB, exhibiting dual-emission fluorescence, was synthesized. This synthesis involved coupling a high-crystallinity fluorescent COF (COF-TTDB) with carbazole-9-ethanol (CB) via a "Williamson" reaction. COF@CB featured exceptional dual-emission fluorescence, a high specific surface area (919.4 m2·g-1), superior thermal stability, and abundant active sites. These attributes enabled COF@CB to function as a ratiometric fluorescence sensor capable of simultaneous detection and adsorption. The distinct number and arrangement of hydrogen bond sites in NAs/NPs isomers influenced the intramolecular charge transfer (ICT) effects on COF@CB, thereby enabling the COF@CB-ratiometric fluorescence sensor to distinguish and selectively detect p-NA/p-NP from isomers. Analysis of actual water samples further underscored the sensor's effectiveness in detecting p-NA/p-NP. Furthermore, the presence of multiple active sites on the COF@CB-ratiometric fluorescence sensor facilitated the adsorption of NAs/NPs, promoting the removal of them from actual samples.

3D-Porous Carbon Nitride Through Proton Regulation and Photocatalytic Synergy for Efficient Uranium Extraction From Seawater

Extracting uranium from seawater is crucial for tapping oceanic resources vital to future energy supply. This study synthesized a novel nitrogen vacancy carbon nitride (NCN) grafted polyethyleneimine (PEI) composite material (NCNP). Experiments and molecular dynamics simulations reveal that NCNP effectively hinders the diffusion of uranyl ions (UO2 2+) to the NCN surface, thereby inhibiting electron transfer reactions. This is primarily achieved by the PEI layer, which repels UO2 2+ and prevents its direct contact with the NCN surface. Water-soluble O2 can still diffuse to the NCN surface for reduction reactions, ensuring the reduction performance of NCNP. The introduction of PEI enhances the proton affinity of the material. Under acidic conditions, protons (H+) bind with PEI, reducing competition between protons and uranyl ions for adsorption on the NCN surface. Under alkaline conditions, protons detach from PEI, facilitating H2O2 generation and promoting uranium extraction. This dynamic proton regulation allows NCNP to perform effectively under varying pH conditions. Experimental results show that NCNP achieves a uranium extraction capacity of 498.7 mg g-1 in uranium-spiked simulated seawater, which is significantly higher than that of unmodified carbon nitride (CN), which is one of the highest performances for simulating seawater uranium extraction.

Ocean wave-driven covalent organic framework/ZnO heterostructure composites for piezocatalytic uranium extraction from seawater

Piezoelectric catalysis possesses the potential to convert ocean wave energy into and holds broad prospects for extracting uranium from seawater. Herein, the Z-type ZnO@COF heterostructure composite with excellent piezoelectric properties was synthesized through in situ growth of covalent organic frameworks (COFs) on the surface of ZnO and used for efficient uranium extraction. The designed COFs shell enables ZnO with stability, abundant active sites and high-speed electron transport channels. Meanwhile, the interface electric field established in the heterojunctions stimulates electron transfer from COFs to ZnO, which break the edge shielding effect of the ZnO's metallic state. Additionally, the polarization of ZnO is enhanced by heterogeneous engineering, which ensures the excellent piezocatalytic performance. As a result, ZnO@COF achieves an ultra-high efficiency of 7.56 mg g-1 d-1 for uranium extraction from natural seawater driven by waves. In this work, we open an avenue for developing efficient catalysts for uranium extraction from seawater.

Engineering of robust conjugated polymer-based aerogels via surface-initiated polycondensation towards sunlight-driven seawater desalination and uranium extraction

The aerogels with low thermal conductivity and cross-linked 3D networks can be easily integrated with functional materials to maximize their functionalities, realizing diverse applications such as photothermal seawater desalination and photocatalytic uranium extraction. Sp2C-conjugated porous polymers (sp2C-CPPs) with robust and conjugated CC linkages are ideal photosensitizers for these applications, owing to their exceptional semiconducting properties as well as chemical stability. However, the limited processability and collectability of as-synthesized sp2C-CPP powders impede their extended applications. Herein, we report the preparation of robust sp2C-CPP (DHA-TMT and DBD-TMT) based aerogels via surface-initiated aldol polycondensation (SI-AP). The fully conjugated CC skeletons and electron-donating groups (-OH) endow the sp2C-CPP aerogels with excellent photothermal conversion efficiency (95.6%) and strong affinity for uranium adsorption. In particular, the DHA-TMT aerogel with hydrophilic porous channel exhibits a superb evaporation performance achieving ∼1.55 kg m-2 h-1 under AM 1.5 G while the fast mass transfer caused by photothermal conversion increases the uranium extraction capacity up to 1200 mg m-2 in simulated seawater. Moreover, the sp2C-CPP aerogels demonstrate high stability under strong acid, base and brine solutions. This work shows a strategy for the preparation of uniform and high stability sp2C-CPP-based aerogels to simultaneously enhance their photothermal and photocatalytic performance.

Ti3C2Tx/Cd0.8Zn0.2S composites constructed of Schottky heterojunction for efficient photocatalytic reduction of U(VI)

Photocatalysis has emerged as a extremely promising green technology for the treatment of uranium-containing wastewater. This study focuses on the fabrication of Ti3C2Tx/Cd0.8Zn0.2S composites with Schottky junctions through the in-situ growth of Cd0.8Zn0.2S on Ti3C2Tx nanosheets, enabling efficient photoreduction of U(VI) without the requirement of sacrificial agents. The results demonstrate that the Ti3C2Tx/Cd0.8Zn0.2S composites achieve remarkable 99.48 % U(VI) reduction efficiency within 60 min in a 100 ppm uranium solution. Furthermore, the removal rate remains above 90 % after five cycles. The formation of Schottky heterojunctions by Ti3C2Tx and Cd0.8Zn0.2S leads to the generation of an internal electric field that significantly promotes the rapid separation and transfer of photogenerated carriers, thereby enhancing the photocatalytic reduction efficiency of Ti3C2Tx/Cd0.8Zn0.2S-3:100 (TC/CZS-3:100). A considerable amount of electrons accumulate on Ti3C2Tx via the Schottky barrier, effectively facilitating the reduction of U(VI) to U(IV). As a co-catalyst, Ti3C2Tx enhances the photocatalytic performance and stability of Cd0.8Zn0.2S. Moreover, the practical application in the waste liquid of rare earth tailings reveals that the removal rate can be as high as 91.24 %. This research is of significant value in the development of effective photocatalysts for the elimination of uranium from wastewater.

Artificial Photosynthetic Assemblies Constructed by NH2-UiO-66 Decorated with Spatially Separated Dual Cocatalysts for Enhanced Photocatalytic Uranium Reduction

The phenomenon of rapid migration of photogenerated charges in natural photosynthetic systems has motivated the design of efficient photocatalysts capable of fast charge separation and efficient reaction kinetics for photocatalytically assisted enrichment and separation of uranium U(VI) in uranium wastewater. In this study, we developed a biomimetic photocatalytic system MnOx/NH2-UiO-66-rGO (M/UiO-rGO) with spatially separated dual cocatalysts. Among them, rGO functions to capture electrons and participates in reduction reactions, while MnOx captures holes and participates in oxidation reactions. The M/UiO-rGO catalyst exhibits excellent performance in photocatalytic reduction of uranium (reaching 91.8% in 1 h), and even under natural light conditions, it exhibits excellent uranium removal ability (80.4%). Using multispectral coupling technology, we further confirmed that enriched uranium undergoes a continuous and complex reaction process of "capture-reduction-free radical oxidation-nucleation-crystallization". This work presents a viable strategy for designing biomimetic photocatalysts with efficient charge separation and rapid reaction kinetics for environmental purification purposes.

Copper-Surface-Mediated Synthesis of sp2 Carbon-Conjugated Covalent Organic Framework Photocathodes for Photoelectrochemical Hydrogen Evolution

Sp2-carbon (sp2-c) covalent organic frameworks (COFs), featuring distinctive π-conjugated network structures, facilitate the migration of photo-generated carriers, rendering them exceptionally appealing for applications in photoelectrochemical water splitting. However, owing to the powdery nature of COFs, leaving anchor the sp2-c COFs powder tightly onto a conductive substrate challenging. Here, we propose a method for preparing photoactive substance-conductive substrate integrated photocathodes through copper surface-mediated knoevenagel polycondensation (Cu-SMKP), this approach results in a uniform and stable sp2-c COF film, directly grown on commercial copper foam (COFTh-Cu). The COFTh-Cu demonstrates a high H2-evolution photocurrent density of 56 μA cm-2 at 0.3 V vs. RHE, sustaining stability for 12 h. The as-prepared COFTh-Cu represents a 4.5-fold increase in current density compared to traditional spin-coating methods and outperforms most COF photocathodes without cocatalysts. This innovative copper surface-mediated approach for preparing photocathodes opens up a crucial pathway towards the realization of highly active COF photocathodes.

Coordination-Induced Magnetism Strategy for Highly Selective and Efficient Uranium Separation

Highly efficient separation of dispersed uranium is important for the sustainable development of nuclear industry, and adsorption is the most recognized approach. However, there are many coexisting interfering metal ions that compete with uranyl ion for the chelating ligands in the adsorbents and lead to low separation selectivity and efficiency. Herein, a coordination-induced magnetism strategy is presented for the separation of uranium based on the conversion of diamagnetic cyanoferrocene (Fc-CN) nanocrystals to uranium-containing magnetic recoverable ferromagnetic aggregates. Different from previous adsorption strategies, this strategy combines the mechanisms of photocatalytic uranium enrichment and chemical uranium adsorption. Under light irradiation, electron of Fe(II) in Fc-CN is excited and transfers to uranyl ion via the cyano group to form tight coordination bond between N atom in cyano group and uranium. This phenomenon is unique for uranyl ion, and thus, a high uranium removal rate of 97.98% is achieved in simulated nuclear wastewater with the presence of tremendous interfering ions, proving its highly selective and efficient uranium separation performance. The ability to form highly stable magnetic aggregates via photoinduced interaction between Fc-CN and uranium enriches the understanding on the chemical properties of Fc-CN and uranium.

Novel Top-Down Synthesis of Covalent Organic Frameworks for Uranyl Ion Capture

Seeking novel synthetic methodology to further promote the preparation of covalent organic frameworks (COFs) has long been our pursuit but remains a challenging task. Herein, we report a new protocol, a top-down approach for facile synthesis of COFs. Interestingly, our top-down route can impressively generate extended COFs by reticular chemistry which cannot be accessed by the commonly used bottom-up synthesis route. Notably, our top-down method also has outstanding advantages in achieving what we are pursuing in COFs, such as heteropores and multiple components. The current findings not only dramatically reduce the difficulty of COF synthesis but also are generally applicable for the synthesis of complicated COFs constructed from different building blocks and linkages.

Record High Uranium Photoassisted Capture Performance from Fluorine-Containing Wastewater by Ag/WO3-x with Surface Defect and Heterostructure

The uranium recovery from high concentration fluorine-containing uranium wastewater is a desired research target in the field of environmental radiochemistry but is very challenging due to the formation of stable uranium fluoride complexes that are quite difficult to extract. By employing surface defect engineering and interfacial heterostructure design, we present here the rational design of an efficient photocatalyst (Ag/WO3-x) for U(VI) uptake from fluorine-containing uranium wastewater without any sacrificial agents. The defect-rich surface of Ag/WO3-x facilitates confined adsorption of uranium, while the introduction of Ag nanoparticles enables both efficient electron-hole separation and a plasmon effect upon light irradiation. Ag/WO3-x shows high U(VI) removal efficiency of 96.3% at 8 mg/L U(VI) within 60 min. Notably, even when the ratio of F- to U(VI) is as high as 20:1, the removal efficiency of U(VI) by Ag/WO3-x reaches up to 95%. Additionally, the maximum capture capacity of U(VI) on Ag/WO3-x reaches 676.8 mg/g at 200 mg/L of U(VI) within 60 min, which is superior to ever-reported photocatalysts in fluorine-containing uranium wastewater. This work provides an effective way for the uranium capture from fluorine-containing wastewater through the synergy of plasmon effect and defect engineering.

Cairo pentagon tessellated covalent organic frameworks with mcm topology for near-infrared phototherapy

Despite the prevalent of hexagonal, tetragonal, and triangular pore structures in two-dimensional covalent organic frameworks (2D COFs), the pentagonal pores remain conspicuously absent. We herein present the Cairo pentagonal tessellated COFs, achieved through precisely chosen geometry and metrics of the linkers, resulting in unprecedented mcm topology. In each pentagonal structure, porphyrin units create four uniform sides around 15.5 Å with 90° angles, while tetrabiphenyl unit establish a bottom edge about 11.6 Å with 120° angles, aligning precisely with the criteria of Cairo Pentagon. According to the narrow bandgap and strong near-infrared (NIR) absorbance, as-synthesized COFs exhibit the efficient singlet oxygen (1O2) generation and photothermal conversion, resulting in NIR photothermal combined photodynamic therapy to guide cancer cell apoptosis. Mechanistic studies reveal that the good 1O2 production capability upregulates intracellular lipid peroxidation, leading to glutathione depletion, low expression of glutathione peroxidase 4, and induction of ferroptosis. The implementation of pentagonal Cairo tessellations in this work provides a promising strategy for diversifying COFs with new topologies, along with multimodal NIR phototherapy.

Enhanced photocatalytic U(VI) reduction via double internal electric field in CoWO4/covalent organic frameworks p-n heterojunction

Photoreduction of highly toxic U(VI) to less toxic U(IV) is crucial for mitigating radioactive contamination. Herein, a CoWO4/TpDD p-n heterojunction is synthesized, with TpDD serving as the n-type semiconductor substrate and CoWO4 as the p-type semiconductor grown in situ on its surface. The Fermi energy difference between TpDD and CoWO4 provides the electrochemical potential for charge-hole separation. Moreover, the Coulombic forces from the distinct carrier types between the two materials synergistically facilitate the transfer of electrons and holes. Hence, an internal electric field directed from TpDD to CoWO4 is established. Under photoexcitation conditions, charges and holes migrate efficiently along the curved band and internal electric field, further enhancing charge-hole separation. As a result, the removal capacity of CoWO4/TpDD increases from 515.2 mg/g in the dark to 1754.6 mg/g under light conditions. Thus, constructing a p-n heterojunction proves to be an effective strategy for remediating uranium-contaminated environments.

Linkage-Mixed Covalent Organic Frameworks Synthesized by a Liquid-Solid Two-Phase Strategy for Photoenhanced Uranium Extraction

Synthesizing COFs with hybrid linkage coupling with both reversible and irreversible natures remains a challenging issue. Herein, we report the synthesis of two rare COFs constructed by both reversible and irreversible linkages through a liquid-solid two-phase strategy. A systematic study reveals a one-pot, two-step reaction mechanism for the two COFs, the first step being a reversible Schiff base reaction and the second step being an irreversible Knoevenagel reaction. Interestingly, this hybrid linkage COF is found to show an outstanding photoenhanced uranium extraction performance. The results not only provide a general and green approach to develop the linkage chemistry of COFs but also enrich the synthesis toolboxes and application of COFs.

Room-Temperature Synthesis of Covalent Organic Frameworks using Gamma-Irradiation in Open-Air Conditions

Covalent organic frameworks (COFs), which have layered stacking structures, extended π-conjugation, and periodic frameworks have become a promising class of materials for a wide range of applications. However, their synthetic pathways frequently need high temperatures, enclosed systems under high pressures, an inert atmosphere, and extended reaction time, which restrict their practicality in real-world applications. Herein, the use of gamma irradiation is presented to synthesize highly crystalline COFs at room temperature under an open-air condition within a short time. This is demonstrated that there is no significant difference in crystallinity of COFs by gamma irradiation under air, N2 or Ar atmosphere conditions. Moreover, this approach can successfully fabricate COFs in the vessel with different degrees of transparency or even in a plastic container. Importantly, this strategy is applicable not only to imine linkage of COFs but also effective to the imide linkages of COFs. Most importantly, these COFs demonstrate improved crystallinity, surface area, and thermal stability in comparison to the corresponding materials synthesized via the solvothermal method. Finally, a COF synthesized through gamma irradiation exhibits remarkable photocatalytic activity in promoting the sacrificial hydrogen evolution from water, displaying a more catalytic efficiency compared with that of its solvothermal analogue.

An imidazole-based covalent-organic framework enabling a super-efficiency in sunlight-driven uranium extraction from seawater

Uranium extraction from seawater represents an effective way to solve the difficulty of the insufficient uranium supply chain. However, this route is still restricted by the low extraction efficiency of reported adsorbents. Here, we find that reversing the donor-acceptor in imidazole-based COFs (covalent-organic frameworks) would be effective for enhancing the extraction efficiency of uranium. As a result, the TI-COF is found to enable a uranium extraction efficiency up to 8.8 mg g-1 day-1 from seawater under visible light irradiation, exceeding all established adsorbents for such use, and an unprecedented uranium extraction efficiency up to 6.9 mg g-1 day-1 from seawater under natural sunlight.

Construction of hierarchical porous and polydopamine/salicylaldoxime functionalized zeolitic imidazolate framework-8 via controlled etching for uranium adsorption

Efficient uranium extraction from seawater is critical for the development of the nuclear industry. Herein, a polydopamine/salicylaldoxime decorated hierarchical zeolitic imidazolate framework-8 (H-PDA/SA-ZIF-8) is constructed by using a controlled etching process. Benefiting from the combination of PDA/SA and the zeolitic imidazolate framework-8 (ZIF-8), as well as a controlled etching process, the H-PDA/SA-ZIF-8 possesses multiaffinity sites, excellent specific surface area (1234.92 m2 g-1), and a hierarchical pore structure. The H-PDA/SA-ZIF-8 exhibits excellent adsorption capacity (Qm = 869.6 mg g-1), selectivity, and reusability in uranium adsorption. The adsorption process of H-PDA/SA-ZIF-8 fits very well with the Langmuir isotherm model and pseudo-second-order models, and the adsorption process equilibrates within 20 min (C0 = 20 mg L-1). Furthermore, the H-PDA/SA-ZIF-8 shows remarkable antibacterial ability. Impressively, the adsorption capacity of H-PDA/SA-ZIF-8 to uranium in natural seawater reaches 6.9 mg g-1 after circulation for 15 days. Therefore, the H-PDA/SA-ZIF-8 is a promising and fascinating material for uranium extraction from natural seawater.

The development of catalysts and auxiliaries for the synthesis of covalent organic frameworks

Covalent organic frameworks (COFs) have recently seen significant advancements. Large quantities of structurally & functionally oriented COFs with a wide range of applications, such as gas adsorption, catalysis, separation, and drug delivery, have been explored. Recent achievements in this field are primarily focused on advancing synthetic methodologies, with catalysts playing a crucial role in achieving highly crystalline COF materials, particularly those featuring novel linkages and chemistry. A series of reviews have already been published over the last decade, covering the fundamentals, synthesis, and applications of COFs. However, despite the pivotal role that catalysts and auxiliaries play in forming COF materials and adjusting their properties (e.g., crystallinity, porosity, stability, and morphology), limited attention has been devoted to these essential components. In this Critical Review, we mainly focus on the state-of-the-art progress of catalysts and auxiliaries applied to the synthesis of COFs. The catalysts include four categories: acid catalysts, base catalysts, transition-metal catalysts, and other catalysts. The auxiliaries, such as modulators, oxygen, and surfactants, are discussed as well. This is then followed by the description of several specific applications derived from the utilization of catalysts and auxiliaries. Lastly, a perspective on the major challenges and opportunities associated with catalysts and auxiliaries is provided.

Construction of a Bifunctional Redox-Site Conjugated Covalent-Organic Framework for Photoinduced Precision Trapping of Uranyl Ions

The performance of covalent-organic frameworks (COFs) for the photocatalytic extraction of uranium is greatly limited by the number of adsorption sites. Herein, inspired by electronegative redox reactions, we designed a nitrogen-oxygen rich pyrazine connected COF (TQY-COF) with multiple redox sites as a platform for extracting uranium via combining superaffinity and enhanced photoinduction. The preorganized bisnitrogen-bisoxygen donor configuration on TQY-COF is entirely matched with the typical geometric coordination of hexavalent uranyl ions, which demonstrates high affinity (tetra-coordination). In addition, the presence of the carbonyl group and pyrazine ring effectively stores and controls electron flow, which efficaciously facilitates the separation of e-/h+ and enhances photocatalytic performance. The experimental results show that TQY-COF removes up to 99.8% of uranyl ions from actual uranium mine wastewater under the light conditions without a sacrificial agent, and the separation coefficient reaches 1.73 × 106 mL g-1 in the presence of multiple metal ions, which realizes the precise separation in the complex environment. Importantly, DFT calculations further elucidate the coordination mechanism of uranium and demonstrate the necessity of the presence of N/O atoms in the photocatalytic adsorption of uranium.

Significantly enhanced uranium extraction by intelligent light-driven nanorobot catchers with precise controllable moving trajectory

Uranium, as the most essential resource for nuclear power production, provides 13% of global electricity demand, has attracted considerable attention. However, it is still a great challenge for uranium extraction from natural water like salt lakes as the background of high salinity and low concentration (3.3 ∼ 330 ppb). Meanwhile, current uranium extraction strategies are generally focus on extraction capacity or selectivity but neglect to enhance extraction rate. In this work, we designed a novel kind of NIR-driven intelligent nanorobots catchers (MSSA-AO) with amidoxime as claws for uranium capture, which showed almost 100% extraction rate and an ultrafast extraction rate. Importantly, high extraction capacity (221.5 mg g-1) and selectivity were taken into consideration as well as good regeneration performance. Furthermore, amidoxime NRCs boosted in extraction amount about 16.7% during the first 5 min with self-driving performance. Overall, this work suggests a new strategy for ultrafast extraction of uranium from natural water with low abundance selectively by self-propelled NRCs, showing great possibility in outdoor application and promising for meeting huge energy needs globally.

Efficient gold recovery by a thiazolyl covalent organic framework

Here, we report a thiazoyl covalent organic framework, namely ECUT-COF-29, for gold recovery. Under visible light irradiation, this material can reduce Au3+ to Au0 in a short time, and the adsorption capacity is as high as 3714 mg g-1, showing great potential in gold recovery.

Aminal-Linked Covalent Organic Framework Membranes Achieve Superior Ion Selectivity

High-salinity wastewater treatment is perceived as a global water resource recycling challenge that must be addressed to achieve zero discharge. Monovalent/divalent salt separation using membrane technology provides a promising strategy for sulfate removal from chlor-alkali brine. However, existing desalination membranes often show low water permeance and insufficient ion selectivity. Herein, an aminal-linked covalent organic framework (COF) membrane featuring a regular long-range pore size of 7 Å and achieving superior ion selectivity is reported, in which a uniform COF layer with subnanosized channels is assembled by the chemical splicing of 1,4-phthalaldehyde (TPA)-piperazine (PZ) COF through an amidation reaction with trimesoyl chloride (TMC). The chemically spliced TPA-PZ (sTPA-PZ) membrane maintains an inherent pore structure and exhibits a water permeance of 13.1 L m-2 h-1 bar-1, a Na2SO4 rejection of 99.1%, and a Cl-/SO4 2- separation factor of 66 for mixed-salt separation, which outperforms all state-of-the-art COF-based membranes reported. Furthermore, the single-stage treatment of NaCl/Na2SO4 mixed-salt separation achieves a high NaCl purity of above 95% and a recovery rate of ≈60%, offering great potential for industrial application in monovalent/divalent salt separation and wastewater resource utilization. Therefore, the aminal-linked COF membrane developed in this work provides a new research avenue for designing smart/advanced membrane materials for angstrom-scale separations.

The construction of a stable hydrogen-bonded organic framework for the photocatalytic reduction and removal of uranium

An imidazolyl hydrogen-bonded organic framework (HOF-T) with outstanding thermal and water stability was constructed by C-H⋯N hydrogen bonding and C-H⋯π interactions. UO22+ can be selectively captured by the imidazole group of HOF-T and rapidly reduced to UO2 under visible light irradiation, realizing exceptional uranium removal with high capacity and fast kinetics.

Extraction of Uranium by a Cheap Phosphite-Derived Polymer under Light Condition

Uranium, as the main fuel of today's nuclear energy, is crucial to the development of nuclear energy. Therefore, the development of low-cost and powerful adsorbents is very important for the removal or recovery of uranium from uranium-containing solutions. Herein, we report the synthesis of a cheap phosphite-derived polymer for such use. Under visible-light irradiation, this phosphite-derived polymer was found to enable selective adsorption of uranium with an adsorption capacity as high as 1030 mg/g, suggesting its great potential in handling nuclear waste.

A convenient functionalization strategy of polyimide covalent organic frameworks for uranium-containing wastewater treatment and uranium recovery

The purpose of this research was to design and synthesize an adsorbent based on polyimide covalent organic frameworks (PICOFs) for uranium-containing wastewater treatment and uranium recovery. A modified solvothermal method was innovatively proposed to synthesize PICOFs with high specific surface area (1998.5 m2 g-1) and regular pore structure. Additionally, a convenient functionalization strategy of PICOFs was designed through polydopamine (PDA) and a well-dispersed polymer (MPC-co-AO) containing multiple functional groups, forming stable composite (PMCA-TPPICOFs) in which the hydrogen bonding and cation-π interactions between PDA and MPC-co-AO played a key role. The obtained PMCA-TPPICOFs as an adsorbent exhibited strong selectivity for uranyl ions (maximum adsorption capacity was 538 mg g-1). In simulated wastewater with low uranium concentrations, the removal rate reached 98.3%, and the concentration of treated simulated wastewater met discharge standards. Moreover, PMCA-TPPICOFs was suitable for fixed-bed column adsorption because of its favorable structure. According to the research about adsorption mechanism, the adsorption primarily relied on electrostatic interaction and complexation. In summary, PMCA-TPPICOFs exhibited good potential for uranium-containing wastewater treatment, expanding the application of PICOFs. And the proposed functionalization strategy and modified solvothermal method may promote research in the fields of material functionalization and COFs synthesis. ENVIRONMENTAL IMPLICATION: Uranium is a raw material for nuclear energy applications, which is toxic and radioactive. If uranium is discharged with wastewater, it would not only pose a threat to the environmental protection and life safety, but also cause the loss of precious nuclear raw materials. Although adsorption was considered to be an effective way to remove uranium, many of the developed adsorbents were difficult to apply due to the harsh wastewater environment and complex preparation processes. This study reported a novel adsorbent and a new functionalization strategy, which was expected to solve the problem of uranium recovery in wastewater.

High mechanical property and hydrophilic electrospun poly amidoxime/poly acrylonitrile composite nanofibrous mats for extraction uranium from seawater

Seawater reserves about 4.5 billion tons of uranium, if properly extracted, could be a sustainable green energy resource for hundreds of years, alternating its limited terrestrial ore and reducing the CO2 emitted from fossil fuels. The current seawater uranium adsorbents suffer neither economically viable nor adsorption efficiency, requiring more development to harvest satisfactorily uranium from seawater. Amidoxime-based fibrous adsorbents are the most promising adsorbents of seawater uranium due to abundant chelating sites. However, they suffer from severe shrinkage and stiffness once they dry, losing porous architecture and mechanical properties. Herein, an economical and scalable two-nozzle electrospinning technology was applied to produce poly amidoxime nanofibers (PAO NFs) supported by Poly acrylonitrile nanofibers (PAN NFs) as composite PAO/PAN nanofibrous mats with high structure stability. These PAO/PAN mats, with rapid wettability and excellent mechanical strength, show promising uranium adsorption capacities of 369.8 mg/g at seawater pH level, much higher than PAO and PAN NFs. The uranium adsorption capacity of the PAO/PAN mat reached 5.16 mg/g after 7 days of circulating (10 ppm uranium) spiked natural seawater. Importantly, the composite mat maintained its fibrous structure after five adsorption-desorption cycles with more than 80 % of its adsorption capacity, confirming its recyclability and stability. Therefore, the composite PAO/PAN mat fulfills the basic requirements for effectively and economically trapping uranium from seawater, which could be a matrix for further development.

Expanding Olefin-Linked Covalent Organic Frameworks toward Selective Photocatalytic Oxidation of Organic Sulfides

Olefin-linked covalent organic frameworks (COFs) have exhibited great potential in visible-light photocatalysis. In principle, expanding fully conjugated COFs can facilitate light absorption and charge transfer, leading to improved photocatalysis. Herein, three olefin-linked COFs with the same topology are synthesized by combining 2,4,6-trimethyl-1,3,5-triazine (TMT) with 1,3,5-triformylbenzene (TFB), 1,3,5-tris(4-formylphenyl)benzene (TFPB), and 1,3,5-tris(4-formylphenylethynyl)benzene (TFPEB), namely, TMT-TFB-COF, TMT-TFPB-COF, and TMT-TFPEB-COF, respectively. From TMT-TFB-COF to TMT-TFPB-COF, expanding phenyl rings provides only limited expansion for π-conjugation due to the steric effect of structural twisting. However, from TMT-TFPB-COF to TMT-TFPEB-COF, the insertion of acetylenes eliminates the steric effect and provides more delocalized π-electrons. As such, TMT-TFPEB-COF exhibits the best optoelectronic properties among these three olefin-linked COFs. Consequently, the photocatalytic performance of TMT-TFPEB-COF is much better than those of TMT-TFB-COF and TMT-TFPB-COF on the oxidation of organic sulfides into sulfoxides with oxygen. The desirable reusability and substrate compatibility of the TMT-TFPEB-COF photocatalyst are further confirmed. The selective formation of organic sulfoxides over TMT-TFPEB-COF under blue light irradiation proceeds via both electron- and energy-transfer pathways. This work highlights a rational design of expanding the π-conjugation of fully conjugated COFs toward selective visible-light photocatalysis.

In Situ Metal-Oxygen-Hydrogen Modified B-Tio2 @Co2 P-X S-Scheme Heterojunction Effectively Enhanced Charge Separation for Photo-assisted Uranium Reduction

Photo-assisted uranium reduction from uranium mine wastewater is expected to overcome the competition between impurity ions and U(VI) in the traditional process. Here, B-TiO2 @Co2 P-X S-scheme heterojunction with metal-oxygen-hydrogen (M-O-H) is developed insitu modification for photo-assisted U(VI) (hexavalent uranium) reduction. Relying on the DFT calculation and Hard-Soft-Acid-Base (HSAB) theory, the introduction of metal-oxygen-hydrogen (M-O-H, hard base) metallic bonds in the B-TiO2 @Co2 P-X is found to enhance the hydrophilicity and the capture capability for uranyl ion (hard acid). Accordingly, B-TiO2 @Co2 P-500 hybrid nanosheets exhibit excellent U(VI) reduction ability (>98%) in the presence of competing ions. By self-consistent energy band calculations and in-situ KPFM spectral analysis, the formation of the internal electric field between B-TiO2 and Co2 P at the heterojunction is proven, offering a strong driving force and atomic transportation highway for accelerating the S-scheme charge carriers directed migration and promoting the photocatalytic reduction of uranium. This work provides a valuable route to explore the functionally modified photocatalyst with high-efficiency photoelectron separation for U(VI) reduction.