Superconductivity at 250 K in lanthanum hydride under high pressures

Superconductivity with T c of 116 K discovered in antimony polyhydrides

Superconductivity (SC) was experimentally observed for the first time in antimony polyhydride. The diamond anvil cell combined with a laser heating system was used to synthesize the antimony polyhydride sample at high pressure and high temperature. In-situ high pressure transport measurements as a function of temperature with an applied magnetic field were performed to study the SC properties. It was found that the antimony polyhydride samples show superconducting transition with critical temperature T c 116 K at 184 GPa. The investigation of SC at magnetic field revealed the superconducting coherent length of ∼40 Å based on the Ginzburg Landau (GL) equation. Antimony polyhydride superconductor has the second highest T c in addition to sulfur hydride among the polyhydrides of elements from main groups IIIA to VIIA in the periodic table.

Pressure-induced hydrogen-dominant high-temperature superconductors

The century-old pursuit of room temperature superconductivity has finally been reached in highly compressed hydrogen-dominant compounds. Future efforts will be focused on understanding the high-pressure hydrogen physics and ambient-pressure applications.

Clathrate metal superhydrides under high-pressure conditions: enroute to room-temperature superconductivity

Room-temperature superconductivity has been a long-held dream of mankind and a focus of considerable interest in the research field of superconductivity. Significant progress has recently been achieved in hydrogen-based superconductors found in superhydrides (hydrides with unexpectedly high hydrogen contents) that are stabilized under high-pressure conditions and are not capturable at ambient conditions. Of particular interest is the discovery of a class of best-ever-known superconductors in clathrate metal superhydrides that hold the record for high superconductivity (e.g. T c = 250-260 K for LaH10) among known superconductors and have great promise to be those that realize the long-sought room-temperature superconductivity. In these peculiar clathrate superhydrides, hydrogen forms unusual 'clathrate' cages containing encaged metal atoms, of which such a kind was first reported in a calcium hexa-superhydride (CaH6) showing a measured high T c of 215 K under a pressure of 170 GPa. In this review, we aim to offer an overview of the current status of research progress on the clathrate metal superhydride superconductors, discuss the superconducting mechanism and highlight the key features (e.g. structure motifs, bonding features, electronic structure, etc.) that govern the high-temperature superconductivity. Future research direction along this line to find room-temperature superconductors will be discussed.

Origin of the near-room temperature resistance transition in lutetium with H2/N2 gas mixture under high pressure

The recent report of room-temperature superconductivity at near-ambient pressure in nitrogen-doped lutetium hydride (Lu-H-N) by Dasenbrock-Gammon et al. [Nature 615, 244-250 (2023)] has attracted tremendous attention due to its anticipated great impact on technology. However, the results could not be independently reproduced by other groups worldwide in follow-up studies, which elicited intense controversy. Here, we develop a reliable experimental protocol to minimize the extensively concerned extrinsic influences on the sample by starting the reaction from pure lutetium loaded with an H2/N2 gas mixture in a diamond anvil cell under different pressures and temperatures and simultaneously monitoring the entire chemical reaction process using in situ four-probe resistance measurements. Therefore, we could repeatedly reproduce the near-room temperature upsurge of electrical resistance at a relatively early stage of the chemical reaction. However, the mechanism is suggested to be a metal-to-semiconductor/insulator transition associated with the structural modulation in the non-stoichiometric Lu-H-N, rather than superconductivity.

Superconducting ternary hydrides: progress and challenges

Since the discovery of the high-temperature superconductors H3S and LaH10 under high pressure, compressed hydrides have received extensive attention as promising candidates for room-temperature superconductors. As a result of current high-pressure theoretical and experimental studies, it is now known that almost all the binary hydrides with a high superconducting transition temperature (T c) require extremely high pressure to remain stable, hindering any practical application. In order to further lower the stable pressure and improve superconductivity, researchers have started exploring ternary hydrides and had many achievements in recent years. Here, we discuss recent progress in ternary hydrides, aiming to deepen the understanding of the key factors regulating the structural stability and superconductivity of ternary hydrides, such as structural motifs, bonding features, electronic structures, electron-phonon coupling, etc. Furthermore, the current issues and challenges of superconducting ternary hydrides are presented, together with the prospects and opportunities for future research.

Predicted hot superconductivity in LaSc2H24 under pressure

The recent theory-driven discovery of a class of clathrate hydrides (e.g., CaH6, YH6, YH9, and LaH10) with superconducting critical temperatures (Tc) well above 200 K has opened the prospects for "hot" superconductivity above room temperature under pressure. Recent efforts focus on the search for superconductors among ternary hydrides that accommodate more diverse material types and configurations compared to binary hydrides. Through extensive computational searches, we report the prediction of a unique class of thermodynamically stable clathrate hydrides structures consisting of two previously unreported H24 and H30 hydrogen clathrate cages at megabar pressures. Among these phases, LaSc2H24 shows potential hot superconductivity at the thermodynamically stable pressure range of 167 to 300 GPa, with calculated Tcs up to 331 K at 250 GPa and 316 K at 167 GPa when the important effects of anharmonicity are included. The very high critical temperatures are attributed to an unusually large hydrogen-derived density of states at the Fermi level arising from the newly reported peculiar H30 as well as H24 cages in the structure. Our predicted introduction of Sc in the La-H system is expected to facilitate future design and realization of hot superconductors in ternary clathrate superhydrides.

Discovery of superconductivity in technetium borides at moderate pressures

Advances in theoretical calculations have boosted the search for high-temperature superconductors, such as sulfur hydrides and rare-earth polyhydrides. However, the required extremely high pressures for stabilizing these superconductors has handicapped further implementation. Based upon thorough structural searches, we identified a series of unprecedented superconducting technetium borides at moderate pressures, including TcB (P63/mmc) with a superconducting transition temperature of Tc = 20.2 K at ambient pressure and TcB2 (P6/mmm) with Tc = 23.1 K at 20 GPa. Superconductivity in these technetium borides mainly originates from the coupling between the low-frequency vibrations of technetium atoms and the dominant technetium-4d electrons at the Fermi level. Our work therefore presents a fresh group in the family of superconducting borides, whose diversified crystal structures suggest rich possibilities in the discovery of other superconducting transition-metal borides.

Structural Phase Transition and Decomposition of XeF2 under High Pressure and Its Formation of Xe-Xe Covalent Bonds

Noble gases with inert chemical properties have rich bonding modes under high pressure. Interestingly, Xe and Xe form covalent bonds, originating from the theoretical simulation of the pressure-induced decomposition of XeF2, which has yet to be experimentally confirmed. Moreover, the structural phase transition and metallization of XeF2 under high pressure have always been controversial. Therefore, we conducted extensive experiments using a laser-heated diamond anvil cell technique to investigate the above issues of XeF2. We propose that XeF2 undergoes a structural phase transition and decomposition above 84.1 GPa after laser heating, and the decomposed product Xe2F contains Xe-Xe covalent bonds. Neither the pressure nor temperature alone could bring about these changes in XeF2. With our UV-vis absorption experiment, I4/mmm-XeF2 was metalized at 159 GPa. This work confirms the existence of Xe-Xe covalent bonds and provides insights into the controversy surrounding XeF2, enriching the research on noble gas chemistry under high pressure.

Chemical Flexibility of Atomically Precise Metal Clusters

Ligand-protected metal clusters possess hybrid properties that seamlessly combine an inorganic core with an organic ligand shell, imparting them exceptional chemical flexibility and unlocking remarkable application potential in diverse fields. Leveraging chemical flexibility to expand the library of available materials and stimulate the development of new functionalities is becoming an increasingly pressing requirement. This Review focuses on the origin of chemical flexibility from the structural analysis, including intra-cluster bonding, inter-cluster interactions, cluster-environments interactions, metal-to-ligand ratios, and thermodynamic effects. In the introduction, we briefly outline the development of metal clusters and explain the differences and commonalities of M(I)/M(I/0) coinage metal clusters. Additionally, we distinguish the bonding characteristics of metal atoms in the inorganic core, which give rise to their distinct chemical flexibility. Section 2 delves into the structural analysis, bonding categories, and thermodynamic theories related to metal clusters. In the following sections 3 to 7, we primarily elucidate the mechanisms that trigger chemical flexibility, the dynamic processes in transformation, the resultant alterations in structure, and the ensuing modifications in physical-chemical properties. Section 8 presents the notable applications that have emerged from utilizing metal clusters and their assemblies. Finally, in section 9, we discuss future challenges and opportunities within this area.

Strategies for improving the superconductivity of hydrides under high pressure

The successful prediction and confirmation of unprecedentedly high-temperature superconductivity in compressed hydrogen-rich hydrides signify a remarkable advancement in the continuous quest for attaining room-temperature superconductivity. The recent studies have established a broad scope for developing binary and ternary hydrides and illustrated correlation between specific hydrogen motifs and high-Tcs under high pressures. The analysis of the microscopic mechanism of superconductivity in hydrides suggests that the high electronic density of states at the Fermi level (EF), the large phonon energy scale of the vibration modes and the resulting enhanced electron-phonon coupling are crucial contributors towards the high-Tcphonon-mediated superconductors. The aim of our efforts is to tackle forthcoming challenges associated with elevating theTcand reducing the stabilization pressures of hydrogen-based superconductors, and offer insights for the future discoveries of room-temperature superconductors. Our present Review offers an overview and analysis of the latest advancements in predicting and experimentally synthesizing various crystal structures, while also exploring strategies to enhance the superconductivity and reducing their stabilization pressures of hydrogen-rich hydrides.

Irreversible coherent matching bonding of van der Waals heterostructure lattice by pressure

The key of heterostructure is the combinations created by stacking various vdW materials, which can modify interlayer coupling and electronic properties, providing exciting opportunities for designer devices. However, this simple stacking does not create chemical bonds, making it difficult to fundamentally alter the electronic structure. Here, we demonstrate that interlayer interactions in heterostructures can be fundamentally controlled using hydrostatic pressure, providing a bonding method to modify electronic structures. By covering graphene with boron nitride and inducing an irreversible phase transition, the conditions for graphene lattice-matching bonding (IMB) were created. We demonstrate that the increased bandgap of graphene under pressure is well maintained in ambient due to the IMB in the interface. Comparison to theoretical modeling emphasizes the process of pressure-induced interfacial bonding, systematically generalizes, and predicts this model. Our results demonstrate that pressure can irreversibly control interlayer bonding, providing opportunities for high-pressure technology in ambient applications and IMB engineering in heterostructures.

Superconductivity above 105 K in Nonclathrate Ternary Lanthanum Borohydride below Megabar Pressure

Hydrides are promising candidates for achieving room-temperature superconductivity, but a formidable challenge remains in reducing the stabilization pressure below a megabar. In this study, we successfully synthesized a ternary lanthanum borohydride by introducing the nonmetallic element B into the La-H system, forming robust B-H covalent bonds that lower the pressure required to stabilize the superconducting phase. Electrical transport measurements confirm the presence of superconductivity with a critical temperature (Tc) of up to 106 K at 90 GPa, as evidenced by zero resistance and Tc shift under an external magnetic field. X-ray diffraction and transport measurements identify the superconducting compound as LaB2H8, a nonclathrate hydride, whose crystal structure remains stable at pressures as low as ∼ half megabar (59 GPa). Stabilizing superconductive stoichiometric LaB2H8 in a submegabar pressure regime marks a substantial advancement in the quest for high-Tc superconductivity in polynary hydrides, bringing us closer to the ambient pressure conditions.

Superior Superconducting Properties Realized in Quaternary La-Y-Ce Hydrides at Moderate Pressures

The recent revolution in the superconductivity field stems from hydride superconductors. Multicomponent hydrides provide a crucial platform for tracking high-temperature superconductors. Besides high superconducting transition temperature (Tc), achieving both giant upper critical magnetic field [μ0Hc2(0)] and high critical current density [Jc(0)] is also key to the latent potential of the application for hydride superconductors. In this work, we have successfully synthesized quaternary La-Y-Ce hydrides with excellent properties under moderate pressure by using the concept of "entropy engineering." The obtained temperature dependence of the resistance provides evidence for the superconductivity of Fm3m-(La,Y,Ce)H10, with the maximum Tc ∼ 190 K (at 112 GPa). Notably, Fm3m-(La,Y,Ce)H10 boasts exceptional properties: μ0Hc2(0) reaching 292 T and Jc(0) surpassing 4.61 × 107 A/cm2. Compared with the binary LaH10/YH10, we find that the Fm3m structure in (La,Y,Ce)H10 can be stable at relatively low pressures (112 GPa). These results indicate that multicomponent hydrides can significantly enhance the superconducting properties and regulate stabilizing pressure through the application of "entropy engineering." This work stimulates the experimental exploration of multihydride superconductors and also provides a reference for the search of room-temperature superconductors in more diversified hydride materials in the future.

A brief review of characteristic luminescence properties of Eu3+ in mixed-anion compounds

Trivalent europium (Eu3+) ions show red luminescence with sharp spectral lines owing to the intraconfigurational 4f-4f transitions. Because of their characteristic luminescence properties, various Eu3+-doped inorganic compounds have been developed to meet the demands of optoelectronic devices. Regardless of shielding by the outer 5s and 5p orbitals, the properties of the Eu3+:4f-4f transition depend on the local environment, such as the shapes of the coordination polyhedra, site symmetry, nephelauxetic effects, crystal field effects, and bonding character. Mixed-anion coordination, where multiple types of anions surround a single Eu3+ ion, can directly affect the optical properties of Eu3+. We review the luminescence properties of Eu3+ ions in mixed-anion compounds of the oxynitride YSiO2N and oxyhalides YOX (X = Cl or Br). Oxynitride and oxyhalide coordination results in characteristic transition probabilities and branching ratios of the 5D0 → 7F0-6 transitions due to distorted structural environments and red-shifted charge transfer excitation bands due to an upward shift of the valence band. The expected and experimentally observed features of Eu3+ luminescence in mixed-anion compounds are outlined based on band and Judd-Ofelt theories. Future applications of the intense red luminescence at ∼620 nm under near-ultraviolet light illumination in Eu3+-doped mixed-anion compounds are introduced, and material design guidelines for new functional Eu3+-doped phosphors are presented.

Superconductivity in monolayer Janus titanium-sulfur hydride (TiSH) at ambient pressure

Janus two dimensional (2D) materials are new and novel materials. As they break out-of-plane symmetry, they possess several fascinating properties which can be applied in catalytic reactions and opto-electronics. Recent synthesis of MoSH and the prediction of phonon-mediated superconductivity have opened a new way to investigate the properties of hydrogenated Janus materials (Novoselovet al2004Science306666-9; Mehtaet al2023Solid State Commun.375115347; Naiket al2023Comput. Theor. Chem.1228114278). In this work, we performed the density functional theory calculations to demonstrate that titanium sulfur hydride (TiSH) is dynamically stable and becomes phonon-mediated superconductor with the superconducting critical temperature,Tc= 9.24 K with the corresponding value of electron-phonon coupling constant,λ= 0.71, in the weak interaction limits, under ambient conditions. Eliashberg spectral functionα2F(ω)was well converged for dense grid ofq1 ×q2 ×q3 = 12 × 12 × 1 andnk1 ×nk2 ×nk3 = 140 × 140 × 1. The effect of smearing broadening was also considered for determining well converged value ofTcandλ. Figure5(b) shows that after smearing broadening of 0.02 Ry,λshows convergent values, and subsequent changes are as low as less that 5% of the peak value. Overall, our findings predicted a new member in the 2D Janus hydride family with possible applications in 2D nanomaterials and superconducting devices applications.

Superconductivity of thulium substituted clathrate hexahydrides at moderate pressure

Due to the BCS theory, hydrogen, the lightest element, would be the prospect of room-temperature superconductor after metallization, but because of the difficulty of the hydrogen metallization, the theory about hydrogen pre-compression was proposed that the hydrogen-rich compounds could be a great option for the high Tc superconductors. The superior properties of TmH6, YbH6 and LuH6 indicated the magnificent potential of heavy rare earth elements for low-pressure stability. Here, we designed XTmH12 (X = Y, Yb, Lu, and La) to obtain higher Tc while maintaining low pressure stability. Most prominently, YbTmH12 can stabilize at a pressure of 60 GPa. Compared with binary TmH6 hydride, its Tc was increased to 48 K. The results provide an effective method for the rational design of moderate pressure stabilized hydride superconductors.

Diamond with Sp2-Sp3 composite phase for thermometry at Millikelvin temperatures

Temperature is one of the seven fundamental physical quantities. The ability to measure temperatures approaching absolute zero has driven numerous advances in low-temperature physics and quantum physics. Currently, millikelvin temperatures and below are measured through the characterization of a certain thermal state of the system as there is no traditional thermometer capable of measuring temperatures at such low levels. In this study, we develop a kind of diamond with sp2-sp3 composite phase to tackle this problem. The synthesized composite phase diamond (CPD) exhibits a negative temperature coefficient, providing an excellent fit across a broad temperature range, and reaching a temperature measurement limit of 1 mK. Additionally, the CPD demonstrates low magnetic field sensitivity and excellent thermal stability, and can be fabricated into probes down to 1 micron in diameter, making it a promising candidate for the manufacture of next-generation cryogenic temperature sensors. This development is significant for the low-temperature physics researches, and can help facilitate the transition of quantum computing, quantum simulation, and other related technologies from research to practical applications.

Layered Hydride LiH4 with a Pressure-Insensitive Superconductivity

For hydride superconductors, each significant advance is built upon the discovery of novel H-based structural units, which in turn push the understanding of the superconducting mechanism to new heights. Based on first-principles calculations, we propose a metastable LiH4 with a wavy H layer composed of the edge-sharing pea-like H18 rings at high pressures. Unexpectedly, it exhibits pressure-insensitive superconductivity manifested by an extremely small pressure coefficient (dTc/dP) of 0.04 K/GPa. This feature is attributed to the slightly weakened electron-phonon coupling with pressure, caused by the reduced charge transfer from Li atoms to wavy H layers, significantly suppressing the substantial increase in the contribution of phonons to Tc. Its superconductivity originates from the strong coupling between the H 1s electrons and the high-frequency phonons associated with the H layer. Our study extends the list of H-based structural units and enhances the in-depth understanding of pressure-related superconductivity.

Publishing important work that lacks validity or reproducibility - pushing frontiers or corrupting science?

Scientific research requires objectivity, impartiality and stringency. However, scholarly literature is littered with preliminary and explorative findings that lack reproducibility or validity. Some low-quality papers with perceived high impact have become publicly notable. The collective effort of fellow researchers who follow these false leads down blind alleys and impasses is a waste of time and resources, and this is particularly damaging for early career researchers. Furthermore, the lay public might also be affected by socioeconomic repercussions associated with the findings. It is arguable that the nature of scientific research is such that its frontiers are moved and shaped by cycles of published claims inducing in turn rounds of validation by others. Using recent example cases of room-temperature superconducting materials research, I argue instead that publication of perceptibly important or spectacular claims that lack reproducibility or validity is epistemically and socially irresponsible. This is even more so if authors refuse to share research materials and raw data for verification by others. Such acts do not advance, but would instead corrupt science, and should be prohibited by consensual governing rules on material and data sharing within the research community, with malpractices appropriately sanctioned.

Metallic Re3O2 with mixed-valence states

Rhenium (Re) shows the richest valence states from +2 to +7 in compounds, but its mixed-valence states are still missing thus far. In this work, we have explored the Re-O phase diagram with a wide range of stoichiometric compositions under high pressure through first-principles structural search calculations. Besides identifying two novel high-pressure phases of ReO2 and ReO3, we reveal two hitherto unknown Re-rich Re3O2 and O-rich ReO4 compounds. Re atoms in Re3O2 show mixed-valence states due to their inequivalent coordination environments, the first example in Re-based compounds. Electronic structure calculations demonstrate that the four discovered Re-O phases exhibit metallicity contributed by Re 5d electrons. Among them, ReO3 has a predicted critical temperature of up to 12 K at 50 GPa, derived from the interaction between Re 5d electrons and Re-derived low-frequency phonons. Our study points to new opportunities to disclose novel transition metal compounds with mixed-valence states.

The Influence of Electroluminescent Inhomogeneous Phase Addition on Enhancing MgB2 Superconducting Performance and Magnetic Flux Pinning

As a highly regarded superconducting material with a concise layered structure, MgB2 has attracted significant scientific attention and holds vast potential for applications. However, its limited current-carrying capacity under high magnetic fields has greatly hindered its practical use. To address this issue, we have enhanced the superconducting performance of MgB2 by incorporating inhomogeneous phase nanostructures of p-n junctions with electroluminescent properties. Through temperature-dependent measurements of magnetization, electronic specific heat, and Hall coefficient under various magnetic fields, we have confirmed the crucial role of inhomogeneous phase electroluminescent nanostructures in improving the properties of MgB2. Experimental results demonstrate that the introduction of electroluminescent inhomogeneous phases effectively enhances the superconducting performance of MgB2. Moreover, by controlling the size of the electroluminescent inhomogeneous phases and optimizing grain connectivity, density, and microstructural uniformity, we can further improve the critical temperature (TC) and flux-pinning capability of MgB2 superconducting materials. Comprehensive studies on the physical properties of MgB2 superconducting structures added with p-n junction electroluminescent inhomogeneous phases also confirm the general effectiveness of electroluminescent inhomogeneous phases in enhancing the performance of superconducting materials.

Feasible Route to High-Temperature Ambient-Pressure Hydride Superconductivity

A key challenge in materials discovery is to find high-temperature superconductors. Hydrogen and hydride materials have long been considered promising materials displaying conventional phonon-mediated superconductivity. However, the high pressures required to stabilize these materials have restricted their application. Here, we present results from high-throughput computation, considering a wide range of high-symmetry ternary hydrides from across the periodic table at ambient pressure. This large composition space is then reduced by considering thermodynamic, dynamic, and magnetic stability before direct estimations of the superconducting critical temperature. This approach has revealed a metastable ambient-pressure hydride superconductor, Mg_{2}IrH_{6}, with a predicted critical temperature of 160 K, comparable to the highest temperature superconducting cuprates. We propose a synthesis route via a structurally related insulator, Mg_{2}IrH_{7}, which is thermodynamically stable above 15 GPa, and discuss the potential challenges in doing so.

Sensing at the Nanoscale Using Nitrogen-Vacancy Centers in Diamond: A Model for a Quantum Pressure Sensor

The sensing of stress under harsh environmental conditions with high resolution has critical importance for a range of applications including earth's subsurface scanning, geological CO2 storage monitoring, and mineral and resource recovery. Using a first-principles density functional theory (DFT) approach combined with the theoretical modelling of the low-energy Hamiltonian, here, we investigate a novel approach to detect unprecedented levels of pressure by taking advantage of the solid-state electronic spin of nitrogen-vacancy (NV) centers in diamond. We computationally explore the effect of strain on the defect band edges and band gaps by varying the lattice parameters of a diamond supercell hosting a single NV center. A low-energy Hamiltonian is developed that includes the effect of stress on the energy level of a ±1 spin manifold at the ground state. By quantifying the energy level shift and split, we predict pressure sensing of up to 0.3 MPa/Hz using the experimentally measured spin dephasing time. We show the superiority of the quantum sensing approach over traditional optical sensing techniques by discussing our results from DFT and theoretical modelling for the frequency shift per unit pressure. Importantly, we propose a quantum manometer that could be useful to measure earth's subsurface vibrations as well as for pressure detection and monitoring in high-temperature superconductivity studies and in material sciences. Our results open avenues for the development of a sensing technology with high sensitivity and resolution under extreme pressure limits that potentially has a wider applicability than the existing pressure sensing technologies.

Luminescence-Monitored Progressive Chemical Pressure Implementation Realized through Successive Y3+ and Mg2+ Doping into Ca10.5(PO4)7:Eu2

Chemical pressure generated through ion doping into crystal lattices has been proven to be conducive to exploration of new matter, development of novel functionalities, and realization of unprecedented performances. However, studies are focusing on one-time doping, and there is a lack of both advanced investigations for multiple doping and sophisticated strategies to precisely and quantitatively track the gradual functionality evolution along with progressive chemical pressure implementation. Herein, high-valent Y3+ and equal-valent Mg2+ is successively doped to replace multiple Ca sites in Ca10.5(PO4)7:Eu2+. The luminescence evolution of Eu2+ serves as an optical probe, allowing step-by-step and atomic-level tracking of the site occupation of Y3+ and Mg2+, interassociation of Ca sites, and ultimately functionality improvement. The resulting Ca8MgY(PO4)7:Eu2+ displays a record-high relative sensitivity for optical thermometry. Utilization of the environment-sensitive emission of Eu2+ as a luminescent probe has offered a unique approach to monitoring structure-functionality evolution in vivo with atomic precision, which shall also be extended to optimization of other functionalities such as ferroelectricity, conductivity, thermoelectricity, and catalytic activity through precise control over atomic diffusion in other types of substances.

Thermodynamic properties and enhancement of diamagnetism in nitrogen doped lutetium hydride synthesized at high pressure

Nitrogen doped lutetium hydride has drawn global attention in the pursuit of room-temperature superconductivity near ambient pressure and temperature. However, variable synthesis techniques and uncertainty surrounding nitrogen concentration have contributed to extensive debate within the scientific community about this material and its properties. We used a solid-state approach to synthesize nitrogen doped lutetium hydride at high pressure and temperature (HPT) and analyzed the residual starting materials to determine its nitrogen content. High temperature oxide melt solution calorimetry determined the formation enthalpy of LuH1.96N0.02 (LHN) from LuH2 and LuN to be -28.4 ± 11.4 kJ/mol. Magnetic measurements indicated diamagnetism which increased with nitrogen content. Ambient pressure conductivity measurements observed metallic behavior from 5 to 350 K, and the constant and parabolic magnetoresistance changed with increasing temperature. High pressure conductivity measurements revealed that LHN does not exhibit superconductivity up to 26.6 GPa. We compressed LHN in a diamond anvil cell to 13.7 GPa and measured the Raman signal at each step, with no evidence of any phase transition. Despite the absence of superconductivity, a color change from blue to purple to red was observed with increasing pressure. Thus, our findings confirm the thermodynamic stability of LHN, do not support superconductivity, and provide insights into the origins of its diamagnetism.

Diverse high-pressure chemistry in Y-NH3BH3 and Y-paraffin oil systems

The yttrium-hydrogen system has gained attention because of near-ambient temperature superconductivity reports in yttrium hydrides at high pressures. We conducted a study using synchrotron single-crystal x-ray diffraction (SCXRD) at 87 to 171 GPa, resulting in the discovery of known (two YH3 phases) and five previously unknown yttrium hydrides. These were synthesized in diamond anvil cells by laser heating yttrium with hydrogen-rich precursors-ammonia borane or paraffin oil. The arrangements of yttrium atoms in the crystal structures of new phases were determined on the basis of SCXRD, and the hydrogen content estimations based on empirical relations and ab initio calculations revealed the following compounds: Y3H11, Y2H9, Y4H23, Y13H75, and Y4H25. The study also uncovered a carbide (YC2) and two yttrium allotropes. Complex phase diversity, variable hydrogen content in yttrium hydrides, and their metallic nature, as revealed by ab initio calculations, underline the challenges in identifying superconducting phases and understanding electronic transitions in high-pressure synthesized materials.

First-principles study of high-pressure structural phase transition and superconductivity of YBeH8

The theory-led prediction of LaBeH8, which has a high superconducting critical temperature (Tc) above liquid nitrogen under a pressure level below 1 Mbar, has been experimentally confirmed. YBeH8, which has a structural configuration similar to that of LaBeH8, has also been predicted to be a high-temperature superconductor at high pressure. In this study, we focus on the structural phase transition and superconductivity of YBeH8 under pressure by using first-principles calculations. Except for the known face-centered cubic phase of Fm3̄m, we found a monoclinic phase with P1̄ symmetry. Moreover, the P1̄ phase transforms to the Fm3̄m phase at ∼200 GPa with zero-point energy corrections. Interestingly, the P1̄ phase undergoes a complex electronic phase transition from semiconductor to metal and then to superconducting states with a low Tc of 40 K at 200 GPa. The Fm3̄m phase exhibits a high Tc of 201 K at 200 GPa, and its Tc does not change significantly with pressure. When we combine the method using two coupling constants, λopt and λac, with first-principles calculations, λopt is mainly supplied by the Be-H alloy backbone, which accounts for about 85% of total λ and makes the greatest contribution to the high Tc. These insights not only contribute to a deeper understanding of the superconducting behavior of this ternary hydride but may also guide the experimental synthesis of hydrogen-rich compounds.

High-temperature superconductivities and crucial factors influencing the stability of LaThH12 under moderate pressures

The recent discovery of high-temperature superconductivity in compressed hydrides has reignited the long-standing quest for room-temperature superconductors. However, the synthesis of superconducting hydrides under moderate pressure and the identification of crucial factors that affect their stability remain challenges. Here, we predicted the ternary clathrate phases of LaThH12 with potential superconductivity under high pressures and specifically proposed a novel R3̄c-LaThH12 phase exhibiting a remarkable Tc of 54.95 K at only 30 GPa to address these confusions. Our first-principles studies show that the high-Tc value of Pm3̄m and Cmmm-LaThH12 phases was induced by the strong electron-phonon coupling driven by the synergy of the electron-phonon matrix element and phonon softening caused by Fermi surface nesting. Importantly, we demonstrate the dual effects of enhanced ionic bonding and expanded orbital hybridization between Th-6f and H-sp3 orbitals during depressurization are primary factors governing the dynamic stability of R3̄c-LaThH12 at low pressures. Our findings offer crucial insights into the underlying mechanisms governing low-pressure stability and provide guidance for experimental efforts aimed at realizing hydrogen-based superconductors with both low synthesis pressures and high-Tc.

Imaging the Meissner effect in hydride superconductors using quantum sensors

By directly altering microscopic interactions, pressure provides a powerful tuning knob for the exploration of condensed phases and geophysical phenomena1. The megabar regime represents an interesting frontier, in which recent discoveries include high-temperature superconductors, as well as structural and valence phase transitions2-6. However, at such high pressures, many conventional measurement techniques fail. Here we demonstrate the ability to perform local magnetometry inside a diamond anvil cell with sub-micron spatial resolution at megabar pressures. Our approach uses a shallow layer of nitrogen-vacancy colour centres implanted directly within the anvil7-9; crucially, we choose a crystal cut compatible with the intrinsic symmetries of the nitrogen-vacancy centre to enable functionality at megabar pressures. We apply our technique to characterize a recently discovered hydride superconductor, CeH9 (ref. 10). By performing simultaneous magnetometry and electrical transport measurements, we observe the dual signatures of superconductivity: diamagnetism characteristic of the Meissner effect and a sharp drop of the resistance to near zero. By locally mapping both the diamagnetic response and flux trapping, we directly image the geometry of superconducting regions, showing marked inhomogeneities at the micron scale. Our work brings quantum sensing to the megabar frontier and enables the closed-loop optimization of superhydride materials synthesis.

Pressure-Driven Polymorphic Transition, Emergent Insulator-To-Metal Transition, and Photoconductivity Switching in Violet Phosphorus

Polymorphic phase transition is an essential phenomenon in condensed matter that the physical properties of materials may undergo significant changes due to the structural transformation. Phase transition has thus become an important means and dimension for regulating material properties. Herein, this study demonstrates the pressure-induced multi-transition of both structure and physical properties in violet phosphorus, a novel phosphorus allotrope. Under compression, violet phosphorus undergoes sequential polymorphic phase transitions. Concomitant with the first phase transition, violet phosphorus exhibits emergent insulator-metal transition, superconductivity, and dramatic switching from positive to negative photoconductivity. Remarkably, the resistance of violet phosphorus shows a sudden drop of around 107 along with the phase transition. In addition, piezochromism from translucent red to opaque black and suppression of photoluminescence are observed upon compression. Of particular interest is that the sample irreversibly transforms into black phosphorus with a pronounced discrepancy in physical properties from the pristine violet phosphorus after decompression. The abundant polymorphic transitions and property changes in violet phosphorus have significant implications for designing novel pressure-responsive electronic/optoelectronic devices and exploring concealed polymorphic transition materials.

Absence of superconductivity in I4/mmm-FeH5: experimental evidence

The experimentally discovered FeH5 exhibits a structure built of atomic hydrogen that only has bonding between hydrogen and iron atoms [C. M. Pepin, G. Geneste, A. Dewaele, M. Mezouar and P. Loubeyre, Science, 2017, 357, 382]. However, its superconductivity has remained unsolved since its discovery. In this work, we have synthesized I4/mmm-FeH5 at 139 GPa combined with laser-heating conditions. The electrical resistance measurements at ultrahigh pressures indicate that no evidence of superconducting transition of FeH5 is observed in the temperature range of 1.5 K to 270 K. These results indicate that I4/mmm-FeH5 does not exhibit superconductivity within the experimental temperature range, and the introduction of iron atoms is not beneficial to the formation of the superconducting phase.

Synthesis and superconductivity in yttrium-cerium hydrides at high pressures

Further increasing the critical temperature and/or decreasing the stabilized pressure are the general hopes for the hydride superconductors. Inspired by the low stabilized pressure associated with Ce 4f electrons in superconducting cerium superhydride and the high critical temperature in yttrium superhydride, we carry out seven independent runs to synthesize yttrium-cerium alloy hydrides. The synthetic process is examined by the Raman scattering and X-ray diffraction measurements. The superconductivity is obtained from the observed zero-resistance state with the detected onset critical temperatures in the range of 97-141 K. The upper critical field towards 0 K at pressure of 124 GPa is determined to be between 56 and 78 T by extrapolation of the results of the electrical transport measurements at applied magnetic fields. The analysis of the structural data and theoretical calculations suggest that the phase of Y0.5Ce0.5H9 in hexagonal structure with the space group of P63/mmc is stable in the studied pressure range. These results indicate that alloying superhydrides indeed can maintain relatively high critical temperature at relatively modest pressures accessible by laboratory conditions.

Metal-bonded perovskite lead hydride with phonon-mediated superconductivity exceeding 46 K under ambient pressure

In the search for high-temperature superconductivity in hydrides, a plethora of multi-hydrogen superconductors have been theoretically predicted, and some have been synthesized experimentally under ultrahigh pressures of several hundred GPa. However, the impracticality of these high-pressure methods has been a persistent issue. In response, we propose a new approach to achieve high-temperature superconductivity under ambient pressure by implanting hydrogen into lead to create a stable few-hydrogen binary perovskite, Pb4H. This approach diverges from the popular design methodology of multi-hydrogen covalent high critical temperature (Tc) superconductors under ultrahigh pressure. By solving the anisotropic Migdal-Eliashberg equations, we demonstrate that perovskite Pb4H presents a phonon-mediated superconductivity exceeding 46 K with inclusion of spin-orbit coupling, which is six times higher than that of bulk Pb (7.22 K) and comparable to that of MgB2, the highestTcachieved experimentally at ambient pressure under the Bardeen, Cooper, and Schrieffer framework. The highTccan be attributed to the strong electron-phonon coupling strength of 2.45, which arises from hydrogen implantation in lead that induces several high-frequency optical phonon modes with a relatively large phonon linewidth resulting from H atom vibration. The metallic-bonding in perovskite Pb4H not only improves the structural stability but also guarantees better ductility than the widely investigated multi-hydrogen, iron-based and cuprate superconductors. These results suggest that there is potential for the exploration of new high-temperature superconductors under ambient pressure and may reignite interest in their experimental synthesis in the near future.

Phase Diagram Analysis of High-Pressure/High-Temperature Polymorphs of Ammonia Borane

Ammonia borane (NH3BH3) is a promising hydrogen-storage material because of its high hydrogen density. It is employed as a hydrogen source when synthesizing superconducting polyhydrides under high pressure. Additionally, NH3BH3 is a crystallographically interesting compound that features protonic hydrogen (Hδ+) and hydridic hydrogen (Hδ-), and it forms a dihydrogen bond, which explains its stable existence as a solid. Herein, X-ray diffraction experiments were performed at high pressures (HPs) and high temperatures (HTs) of up to 30 GPa and 300 °C, respectively, to investigate the HP/HT phase diagram of NH3BH3. A new HP/HT phase (HPHT2) was identified above 9 GPa and 150 °C. Crystal-structure analysis using the Rietveld method and stability verification using density functional theory calculations revealed that HPHT2 has a P21/n (Z = 4) structure, similar to that of a previously reported HP/HT phase (HPHT) that appears at a lower pressure. HPHT2 is denser than the HP phases that appear at room temperature (HP1 and HP2) at the same pressure (up to ∼17 GPa). In the phase diagram, the phase-boundary line between HPHT and HP1 is a downward convex curve. These unconventional phenomena in the density and phase boundary can be attributed to the influence of dihydrogen bonding on the crystal structure and phase diagram.

Solid-state high harmonic spectroscopy for all-optical band structure probing of high-pressure quantum states

High pressure has triggered various novel states/properties in condensed matter, as the most representative and dramatic example being near-room-temperature superconductivity in highly pressured hydrides (~200 GPa). However, the mechanism of superconductivity is not confirmed, due to the lacking of effective approach to probe the electronic band structure under such high pressures. Here, we theoretically propose that the band structure and electron-phonon coupling (EPC) of high-pressure quantum states can be probed by solid-state high harmonic generation (sHHG). This strategy is investigated in high-pressure Im-3m H3S by the state-of-the-art first-principles time-dependent density-functional theory simulations, where the sHHG is revealed to be strongly dependent on the electronic structures and EPC. The dispersion of multiple bands near the Fermi level is effectively retrieved along different momentum directions. Our study provides unique insights into the potential all-optical route for band structure and EPC probing of high-pressure quantum states, which is expected to be helpful for the experimental exploration of high-pressure superconductivity in the future.

Superconductivity of cubic MB6 (M = Na, K, Rb, Cs)

Previous studies have shown that NaB6, KB6, and RbB6 adopting Pm3̄m are superconductors with a relatively high Tc under ambient conditions. In this paper, we conducted systematic structural and related properties research on CsB6 through a genetic evolution algorithm and total energy calculations based on density functional theory between 0 and 20 GPa. Our results reveal a cubic Pm3̄m CsB6, which is dynamically stable under the pressures we studied. We systematically calculated the formation enthalpies, electronic properties, and superconducting properties of Pm3̄m MB6 (M = Na, K, Rb, Cs). They all exhibit metallic features, and boron has high contributions to band structures, density of states, and electron-phonon coupling (EPC). The calculated results about the Helmholtz free energy difference of Pm3̄m CsB6 at 0, 10, and 20 GPa indicate that it is stable upon chemical decomposition (decomposition to simple substances Cs and B) from 0 to 400 K. The phonon density of states indicates that boron atoms occupy the high frequency area. The EPC results show that Pm3̄m CsB6 is a superconductor with Tc = 11.7 K at 0 GPa, close to NaB6 (13.1 K), KB6 (11.7 K), and RbB6 (11.3 K) at 0 GPa in our work, which indicates that boron atoms play an essential role in superconductivity: vibrations of B6 regular octagons lead to the high Tc of Pm3̄m MB6. Our work about Pm3̄m hexaborides provides a supplementary study on the borides of the group IA elements (without Fr and Li) and has an important guiding significance for the experimental synthesis of CsB6.

Enhanced Superconductivity and Critical Current Density Due to the Interaction of InSe2 Bonded Layer in (InSe2)0.12NbSe2

Superconductivity was discovered in (InSe2)xNbSe2. The materials are crystallized in a unique layered structure where bonded InSe2 layers are intercalated into the van der Waals gaps of 2H-phase NbSe2. The (InSe2)0.12NbSe2 superconductor exhibits a superconducting transition at 11.6 K and critical current density of 8.2 × 105 A/cm2. Both values are the highest among all transition metal dichalcogenide superconductors at ambient pressure. The present finding provides an ideal material platform for further investigation of superconducting-related phenomena in transition metal dichalcogenides.

High pressure study of sodium trihydride

The reactivity between NaH and H2 has been investigated through a series of high-temperature experiments up to pressures of 78 GPa in diamond anvil cells combined with first principles calculations. Powder X-ray diffraction measurements show that heating NaH in an excess of H2 to temperatures around 2000 K above 27 GPa yields sodium trihydride (NaH3), which adopts an orthorhombic structure (space group Cmcm). Raman spectroscopy measurements indicate that NaH3 hosts quasi-molecular hydrogen (H 2 δ - ) within a NaH lattice, with the H 2 δ - stretching mode downshifted compared to pure H2 (Δν ∼-120 cm-1 at 50 GPa). NaH3 is stable under room temperature compression to at least 78 GPa, and exhibits remarkable P-T stability, decomposing at pressures below 18 GPa. Contrary to previous experimental and theoretical studies, heating NaH (or NaH3) in excess H2 between 27 and 75 GPa does not promote further hydrogenation to form sodium polyhydrides other than NaH3.

High-temperature superconductivity up to 223 K in the Al stabilized metastable hexagonal lanthanum superhydride

As compressed hydrides constantly refresh the records of superconducting critical temperatures (Tc) in the vicinity of room temperature, this further reinforces the confidence to find more high-temperature superconducting hydrides. In this process, metastable phases of superhydrides offer enough possibilities to access superior superconducting properties. Here we report a metastable hexagonal lanthanum superhydride (P63/mmc-LaH10) stabilized at 146 GPa by introducing an appropriate proportion of Al, which exhibits high-temperature superconductivity with Tc ∼ 178 K, and this value is enhanced to a maximum Tc ∼ 223 K at 164 GPa. A huge upper critical magnetic field value Hc2(0) reaches 223 T at 146 GPa. The small volume expansion of P63/mmc-(La, Al) H10 compared with the binary LaH10 indicates the possible interstitial sites of Al atoms filling into the La-H lattice, instead of forming conventional ternary alloy-based superhydrides. This work provides a new strategy for metastable high-temperature superconductors through the multiple-element system.

Sampling the Materials Space for Conventional Superconducting Compounds

A large scale study of conventional superconducting materials using a machine-learning accelerated high-throughput workflow is performed, starting by creating a comprehensive dataset of around 7000 electron-phonon calculations performed with reasonable convergence parameters. This dataset is then used to train a robust machine learning model capable of predicting the electron-phonon and superconducting properties based on structural, compositional, and electronic ground-state properties. Using this machine, the transition temperatures (Tc ) of approximately 200 000 metallic compounds are evaluated, all of which are on the convex hull of thermodynamic stability (or close to it) to maximize the probability of synthesizability. Compounds predicted to have Tc values exceeding 5 K are further validated using density-functional perturbation theory. As a result, 541 compounds with Tc values surpassing 10 K, encompassing a variety of crystal structures and chemical compositions, are identified. This work is complemented with a detailed examination of several interesting materials, including nitrides, hydrides, and intermetallic compounds. Particularly noteworthy is LiMoN2 , which is predicted to be superconducting in the stoichiometric trigonal phase, with a Tc exceeding 38 K. LiMoN2 has previously been synthesized in this phase, further heightening its potential for practical applications.

Data-driven Design of High Pressure Hydride Superconductors using DFT and Deep Learning

The observation of superconductivity in hydride-based materials under ultrahigh pressures (for example, H3S and LaH10) has fueled the interest in a more data-driven approach to discovering new high-pressure hydride superconductors. In this work, we performed density functional theory (DFT) calculations to predict the critical temperature (Tc) of over 900 hydride materials under a pressure range of (0 to 500) GPa, where we found 122 dynamically stable structures with a Tc above MgB2 (39 K). To accelerate screening, we trained a graph neural network (GNN) model to predict Tc and demonstrated that a universal machine learned force-field can be used to relax hydride structures under arbitrary pressures, with significantly reduced cost. By combining DFT and GNNs, we can establish a more complete map of hydrides under pressure.

Pressure-Induced Metallization of BaH2 and the Effect of Hydrogenation

Using optical spectroscopy, X-ray diffraction, and electrical transport measurements, we have studied the pressure-induced metallization in BaH2 and Ba8H46. Our combined measurements suggest a structural phase transition from BaH2-II to BaH2-III accompanied by band gap closure and transformation to a metallic state at 57 GPa. The metallization is confirmed by resistance measurements as a function of the pressure and temperature. We also confirm that, with further hydrogenation, BaH2 forms the previously observed Weaire-Phelan Ba8H46, synthesized at 45 GPa and 1200 K. In this compound, metallization pressure is shifted to 85 GPa. Through a comparison of the properties of these two compounds, a question is raised about the importance of the hydrogen content in the electronic properties of hydride systems.

Two-gap topological superconductor LaB2 with high Tc = 30 K

Since two gap superconductivity was discovered in MgB2, research on multigap superconductors has attracted increasing attention because of its intriguing fundamental physics. In MgB2, the Mg atom donates two electrons to the borophene layer, resulting in a stronger gap from the σ band and a weaker gap from the π bond. First-principles calculations demonstrate that the two gap anisotropic superconductivity strongly enhances the transition temperature of MgB2 in comparison with that given by the isotropic model. In this work, we report a three-band (B-σ, B-π, and La-d) two-gap superconductor LaB2 with very high Tc = 30 K by solving the fully anisotropic Migdal-Eliashberg equation. Because of the σ and π-d hybridization on the Fermi surface, the electron-phonon coupling constant λ = 1.5 is significantly larger than the λ = 0.7 of MgB2. Our work paves a new route to enhance the electron-phonon coupling strength of multigap superconductors with d orbitals. On the other hand, our analysis reveals that LaB2 belongs to the weak topological semimetal category, leading to a possible topological superconductor with the highest Tc to date. Moreover, upon applying pressure and/or doping, the topology is tunable between weak and strong with Tc varying from 15 to 30 K, opening up a flexible platform for manipulating topological superconductors.

Phase diagrams and superconductivity of ternary Ca-Al-H compounds under high pressure

The search for high-temperature superconductors in hydrides under high pressure has always been a research hotspot. Hydrogen-based superconductors offer an avenue to achieve the long-sought goal of superconductivity at room temperature. Here we systematically explored the high-pressure phase diagram, electronic properties, lattice dynamics and superconductivity of the ternary Ca-Al-H system using ab initio methods. At 80 GPa, CaAlH5 transforms from Cmcm to P21/m phase. Both of Cmcm-CaAlH5 and Pnnm-CaAl2H8 are semiconductors. At 200 GPa, P4/mmm-CaAlH7 and a metastable compound Immm-Ca2AlH12 were found. Furthermore, P4/mmm-CaAlH7 shows obvious softening of the high frequency vibration modes, which improves the strength of electron-phonon coupling. Therefore, a superconducting transition temperature Tc of 71 K is generated in P4/mmm-CaAlH7 at 50 GPa. In addition, the thermodynamic metastable Immm-Ca2AlH12 exhibits a superconducting transition temperature of 118 K at 250 GPa. These results are very useful for the experimental searching of new high-Tc superconductors in ternary hydrides. Our work may provide an opportunity to search for high Tc superconductors at lower pressure.

Prediction of superconductivity in metallic boron-carbon compounds from 0 to 100 GPa by high-throughput screening

Boron-carbon compounds have been shown to have feasible superconductivity. In our earlier paper [Zheng et al., Phys. Rev. B, 2023, 107, 014508], we identified a new conventional superconductor of LiB3C at 100 GPa. Here, we aim to extend the investigation of possible superconductivity in this structural framework by replacing Li atoms with 27 different cations from periods 3, 4, and 5 under pressures ranging from 0 to 100 GPa. Using the high-throughput screening method of zone-center electron-phonon interaction, we found that ternary compounds like CaB3C, SrB3C, TiB3C, and VB3C are promising candidates for superconductivity. The consecutive calculations using the full Brillouin zone confirm that they have a Tc of <31 K at moderate pressures. Our study demonstrates that fast screening of superconductivity by calculating zone-center electron-phonon coupling strength is an effective strategy for high-throughput identification of new superconductors.

Crystal structure prediction and non-superconductivity of N-doped LuH3at near ambient pressure

Lanthanide polyhydrides, which have attracted the attention of researchers, are considered as a potential candidate material for high-temperature superconductivity. Especially, it is reported that N-doped LuH3exhibits near ambient superconductivity recently. It has attracted attention to room temperature superconductivity of ternary Lu-N-H systems at near ambient pressure. Here, we constructed a LuNH3(N-doped LuH3) compound to predict the crystal structural at relatively low pressures. We found a stable ternary LuNH3structure with a tetragonalP4mmphase under 5 GPa. In addition, ourTccalculations show that theP4mmLuNH3structure does not exhibit superconductivity down to 0.3 K at near ambient pressure due to the H atoms hardly contribute to acoustical phonons.

Stability and superconductivity of freestanding two-dimensional transition metal boridene: M4/3B2

The small atomic mass of boron indicates strong electron-phonon coupling (EPC), so it may have a brilliant performance in superconductivity. Recently, a new 2D boride sheet with ordered metal vacancies and surface terminals (Mo4/3B2-x) was realized in experiments (Zhouet al2021Science373801). Here, the 2D monolayer freestanding Mo4/3B2is evidenced to be thermodynamically stable. Through electronic structure, phonon spectrum and EPC, monolayer Mo4/3B2is found to be an intrinsic phonon-mediated superconductor. The superconducting transition temperature (Tc) is determined to be 4.06 K by the McMillian-Allen-Dynes formula. Remarkably, theTcof monolayer Mo4/3B2can be increased to 6.78 K with an appropriate biaxial tensile strain (+5%). Moreover, we predict that other transition metal replacing Mo atoms is also stable and retaining the superconductivity. Such as monolayer W4/3B2is also a superconductor with theTcof 2.37 K. Our research results enrich the database of 2D monolayer superconductors and boron-related formed materials science.