Global potential for harvesting drinking water from air using solar energy

All-regional highly efficient moisture capturing and sunlight driven steam generation

Utilizing solar energy to extract and purify potable water from atmospheric humidity offers a viable approach to combat water scarcity in diverse geographical areas. However, current technologies face challenges related to low efficiency due to the low intrinsic permeability and weak hydrophilicity of H2O, followed by ineffectiveness in diverse climatic conditions and long-lasting implementation. Herein, we develop a highly hygroscopic photothermal hydrogels consisting of chitosan polypyrrole (CP) copolymer matrix and zinc ions (Zn2+). The chelation of Zn2+ with CP avoids ionic leakage and endows the hierarchically porous hydrogel with strong hydration and moisture-absorbing properties. These hydrogels achieve an effective moisture capturing of up to 6.53 g g-1 in a wide humidity range of 30% to 90%, which are the reminiscence of environment including desert and lakes. Furthermore, the grafting of photothermal polypyrrole to chitosan allowed the sunlight-driven steam generation with 87% efficiency of solar energy without additional power input. The recyclable moisture adsorption and desorption procedures maintain without observable deduction in efficiency over 2 weeks. A potable device containing our sunlight-driven antibacterial hydrogels displays the production of 1.3 kg m-2 drinkable water per day, sufficient to meet the needs of a household. Its potential for application across diverse climatic conditions could refine water harvesting practices and guide future research on system optimization and scalability.

Global potential of continuous sorption-based atmospheric water harvesting

Sorption-based atmospheric water harvesting (SAWH) offers a decentralized solution for freshwater generation in remote and arid regions. Continuous SAWH systems, with their compact design and energy efficiency, present advantages over discontinuous systems for kilogram-scale water supply. Using global meteorological data and advanced modeling, we evaluated the performance of passive and active continuous systems, incorporating the isothermal and dynamic properties of twelve advanced sorbents, such as hydrogels, metal-organic frameworks, and composites. Results show that solar-powered continuous SAWH systems can operate effectively year-round in 39.53% of global districts, while active systems enable low-energy harvesting in 55.27% of districts. Temperature and humidity significantly influence performance, with correlations of 47.41% and 86.41%, respectively, surpassing the impact of atmospheric pressure and solar radiation. This study provides a predictive framework for global SAWH performance, offering design insights to optimize system efficiency and guide sorbent development for broader applications.

Advancing Efficiency in Solar-Driven Interfacial Evaporation: Strategies and Applications

Solar-driven interfacial evaporation (SDIE) has emerged as a promising technology for addressing global water scarcity by utilizing solar-thermal conversion and evaporation at the air/material/water interface. The exceptional performance of these systems has attracted significant interest; it is imperative to establish rigorous and scientific standards for evaluating effectiveness, optimizing system design, and ensuring efficient practical applications. In this Review, we propose consensus criteria for accurately assessing system performance and guiding future advancements. We then explore the fundamental mechanisms driving system synergy, emphasizing how material compositions, microscopic hierarchical material structures, and macroscopic three-dimensional spatial architecture designs enhance solar absorption and photothermal conversion; balance heat confinement with water pathway optimization; manage salt resistance; and regulate enthalpy during vaporization. These matched coordination strategies are crucial for maximizing the target SDIE efficiency. Additionally, we investigate the practical applications of SDIE technologies, focusing on cutting-edge progress and versatile water purification, combined with atmospheric water harvesting, salt collection, electric generation, and photothermal deicing. Finally, we highlight the challenges and exciting opportunities for advancing research, emphasizing future efforts to integrate fundamental principles, system-level collaboration, and application-driven approaches to boost sustainable and highly efficient water and energy technologies. By linking system performance evaluation with optimization strategies for influencing factors, we offer a comprehensive overview of the field and a future outlook that promotes highly efficient clean water production and synergistic applications.

Hydrogen-bond disruption in molecularly engineered Janus evaporators for enhanced solar desalination

Hydrogels have emerged as effective evaporator platforms, significantly enhancing evaporation rates by disrupting water's hydrogen bond network. Here, we present an advanced strategy to improve hydrogel evaporation performance by tailoring alkyl hydrophobic groups within biparental polyelectrolyte-shell micelles grafted onto the polyvinyl alcohol (PVA) hydrogel surface. Poly(2-(diethylamino)ethyl methacrylate) (PDEAEMA) quaternized with methyl iodide (MeI) or ethyl iodide (EtI) formed the biparental polyelectrolyte shell, while poly(benzyl methacrylate) (PBzMA) constituted the micelle core, creating BE-MeI and BE-EtI micelles, respectively. The molecularly engineered BE-MeI micelles exhibited an optimized configuration of quaternary amines linked to hydrophobic groups, achieving a synergistic balance between water attraction via electrostatic interactions and water repulsion via steric hindrance. This configuration effectively disrupted the water's hydrogen bond network, lowering the water evaporation enthalpy to 1434 J g-1. The BE-MeI micelle-grafted PVA hydrogel achieved a record-breaking evaporation rate of 4.1 kg m-2 h-1 under 1 sun irradiation, surpassing prior benchmarks, including our previously reported poly(4-vinyl pyridine) quaternized by a MeI system. Additionally, the grafted micelle layer exhibited a salt rejection ratio of 99.62%, ensuring excellent desalination performance. The biparental polyelectrolyte-shell micelle grafting strategy is broadly applicable across diverse hydrogel systems, representing a significant advancement in solar-driven desalination technology.

Integrated System for Photocatalytic Overall Water Splitting from Arid Air

H2 produced through photocatalytic overall water splitting represents a sustainable energy. However, this approach is geographically constrained by freshwater availability, worsening the crisis in arid regions with abundant solar energy. This study introduces a MOF-801-hydrazine-SrTiO3:Al (MS) composite for in situ photocatalytic H2 production using only atmospheric water and sunlight. The MS benefits from the hygroscopic MOF-801-hydrazine for water capture and the photocatalytic SrTiO3:Al for H2 and O2. This system demonstrates effective in situ photocatalytic overall atmospheric water splitting in arid conditions, with a moisture adsorption capacity of 1.02 gH2O gMS-1 in 60 min at 30% relative humidity, and H2 and O2 production rates of 1033.1 and 494.3 μmol h-1 gS-1, respectively. This approach offers a novel solution for sustainable H2 production using natural resources, crucial for water-scarce regions.

Tillandsia-Inspired Ultra-Efficient Thermo-Responsive Hygroscopic Nanofibers for Solar-Driven Atmospheric Water Harvesting

Sorption-based atmospheric water harvesting (SAWH) is a promising approach for supplying water in off-grid arid regions. However, it is difficult to improve the SAWH efficiency because water undergoes multiple phase transformations, such as water vapor-water (desorption and condensation) in the desorption phase. To address this issue, an ultrahygroscopic temperature-responsive hydrogel nanofiber inspired by Tillandsia is developed, comprising poly N-isopropylacrylamide, poly N-dimethylacetamide, and carbon nanotubes and impregnated with lithium chloride (PCP@LiCl). The hydrophobicity of the nanofiber membrane is enhanced with increasing temperature, facilitating water separation from the hydrogel in liquid form. Moreover, PCP@LiCl exhibits unique kinetics at 25 °C and 15%-30% relative humidity, capable of adsorbing moisture to saturation within 2 h, and oozing liquid water within 5 min under sunlight. Through global potential modeling, it is demonstrated that PCP@LiCl has potential applications in arid and semiarid regions. This study provides new insights into the design of high-performance composites for solar-powered atmospheric water harvesting.

Advancements in atmospheric water harvesting: toward continuous operation through mass transfer optimization

Sorption-based atmospheric water harvesting (SAWH) offers a promising solution to global water scarcity. However, practical implementation is limited by discontinuities in the mass transfer process inside sorbents. This perspective reviews current SAWH technologies and introduces a new concept, mass transfer of SAWH (MT-SAWH), which ensures continuous water collection by facilitating the movement of water molecules within a fixed sorbent bed. We discuss design principles and the potential for using renewable energy to maintain a stable water supply. Our goal is to highlight the future potential of SAWH and encourage the development of efficient water harvesting systems.

Bifunctional Portable Powder for Freshwater Production With Moisture Harvesting and Undrinkable Water Purification

Freshwater scarcity threatens human survival, particularly in extreme environments like deserts, oceans, and space. Compatible atmospheric water harvesting and undrinkable water purification offer an affordable approach to solving freshwater scarcity in these extreme environments. Nonetheless, developing composite sorbent to attain efficient atmospheric water harvesting and undrinkable water purification remains challenging. Hence, a portable hybrid hygroscopic powder (HLC powder) consisting of hydroxypropyl chitosan, dibenzaldehyde-functional poly(ethylene glycol), lithium chloride (LiCl), and nano carbon black is proposed. The HLC powder with optimized LiCl load can capture moisture from the air, showing a high water uptake of 1.76 g g-1 at 34% relative humidity (RH) and appropriate over a wide humidity from 34% to 75% RH. pH-responsive sol-gel transition induced by Schiff base bonds transforms the HLC solution into hydrogel, inhibiting hydrated salt leakage. Meanwhile, to achieve efficient undrinkable water purification, the LiCl-free hybrid powder is utilized to convert the undrinkable water, including seawater, dye water, and human urine, to photothermal hydrogel evaporators with low evaporation enthalpies and high evaporation rates ranging from 1.81 to 2.05 kg m-2 h-1 under one sun. This strategy establishes a new path to conveniently obtaining freshwater, breaking hydrological restrictions.

Super Moisture-Sorbent Sponge for Sustainable Atmospheric Water Harvesting and Power Generation

Sorption-based atmospheric water harvesting (SAWH) shows great promise to mitigate the worldwide water scarcity, especially in the arid regions. Salt-based composite materials are the extensively used sorbents for SAWH, however, they suffer from complex preparation to avoid salt leakage. Furthermore, the significant amount of heat produced during water harvesting process is often neglected and wasted. Herein, an integrated strategy is developed to synthesis salt-based stable super moisture-sorbent sponge by using the chelation of LiCl and dopamine (DA), and the simultaneous polymerization of DA on melamine sponge (PMS). The as-prepared LiCl/PMS/CNTs showed high water uptake, reaching 1.26 and 1.81 g g-1 at 15% and 30% RH, respectively, and no salt leakage is observed during the water absorption process. Remarkable daily water production of 3.47 kg kg-1 day-1 in an arid environment (30% RH) is achieved. Moreover, a dual-function system is successfully constructed by combining the LiCl/PMS/CNTs with a thermoelectric module to fully utilize the heat generated from the SAWH process, which can realize the simultaneous production of fresh water and electricity. The maximum output power density is up to 35.4 and 454.4 mW m-2 during the water absorption and desorption process, respectively.

Internally-cooled atmospheric water harvesting enabling improved productivity

Sorption-based atmospheric water harvesting holds promise for alleviating water scarcity, but current prototypes have not shown significant increases in practical yields despite efforts in the enlarged engineering scale. This is due to weakened heat and mass transfer with a packed sorbent bed. In this work, the desiccant-coated adsorbers were employed to fabricate the water harvesting device that incorporates internal fluid for cooling and heating during sorption and desorption. Featured with an internal cooling effect, practical water productivity could be improved by 1.75-9.96 times with a low desorption temperature (45-62 °C). The continuous water harvesting system could produce 0.77-3.98 Lwater/kgsorbent/day with a thermal energy consumption of 7.7-30.4 MJ/kg in wide climates from 20 % to 80 % RH, providing a reference for device design in the engineering view. The demonstration revealed that using natural cooling in the sorption stage has great benefits in improving water harvesting performance, which can be integrated into the building sectors or a wider range of scenarios.

High-yield atmospheric water capture via bioinspired material segregation

Transforming atmospheric water vapor into liquid form can be a way to supply water to arid regions for uses such as drinking water, thermal management, and hydrogen generation. Many current methods rely on solid sorbents that cycle between capture and release at slow rates. We envision a radically different approach where water is transformed and directly captured into a liquid salt solution that is suitable for subsequent distillation or other processing using existing methods. In contrast to other methods utilizing hydrogels as sorbents, we do not store water within hydrogels-we use them as a transport medium. Inspired by nature, we capture atmospheric water through a hydrogel membrane "skin" at an extraordinarily high rate of 5.50 kgm[Formula: see text]d[Formula: see text] at a low humidity of 35%. and up to 16.9 kgm[Formula: see text]d[Formula: see text] at higher humidities. For a drinking-water application, calculated performance of a hypothetical one-square-meter device shows that water could be supplied to two to three people in arid environments. This work is a significant step toward providing new resources and possibilities to water-scarce regions.

Comparison of UV/PS and VUV/PS as ultrafiltration pretreatment: Performance, mechanisms, DBPs formation and toxicity assessment

Ultrafiltration (UF) is widely used in drinking water plants, nevertheless, it still encounters challenges stemming from inevitable membrane fouling caused by natural organic matter (NOM). Herein, this work applied VUV/PS as UF membrane pretreatment and used UV/PS for comparison. VUV/PS system exhibited superior ability in removing NOM compared to UV/PS system. HO and SO4- played crucial roles in the degradation. [SO4-]ss was notably higher than [HO]ss in the systems, yet HO was of greater significance. [HO]ss and [SO4-]ss in the VUV/PS process were remarkably higher than those in the UV/PS process, due to the function of 185 nm photons. VUV/PS pretreatment basically recovered flux and effectively reduced fouling resistance, with better performance than UV/PS. Fouling mechanism was dominated by multiple mechanisms after UV/PS pretreatment, whereas it was transformed into pore blockage after VUV/PS pretreatment. Moreover, the UF effluent quality after VUV/PS pretreatment outperformed that of UV/PS but fell short of that without pretreatment, possibly due to the generation of abundant low MW substances under the action of HO and SO4-. After chlorine disinfection, UV/PS and VUV/PS pretreatments increased the DBPs production and cytotoxicity. Specifically, oxidant PS affected the membrane surface morphology and fouling behaviors, and had no obvious effect on interception performance and mechanical properties. In actual water treatment, VUV/PS and UV/PS pretreatments exhibited excellent performance in alleviating membrane fouling, improving water quality, and reducing DBPs formation and acute toxicity.

Enhanced continuous atmospheric water harvesting with scalable hygroscopic gel driven by natural sunlight and wind

Sorption-based atmospheric water harvesting (SAWH) has received unprecedented attention as a future water and energy platform. However, the water productivity of SAWH systems is still constrained by the slow sorption kinetics at material and component levels and inefficient condensation. Here, we report a facile method to prepare hygroscopic interconnected porous gel (HIPG) with fast sorption-desorption kinetics, high scalability and stability, and strong adhesion property for highly efficient SAWH. We further design a solar-wind coupling driven SAWH device with collaborative heat and mass enhancement achieving continuous water production. Concentrated sunlight contributes to enhancing the desorption and condensation synergistically, and natural wind is introduced to drive the device operation and improve the sorption kinetics. The device demonstrated record high working performance of 14.9 Lwater m-2 day-1 and thermal efficiency of 25.7% in indoor experiments and 3.5-8.9 Lwater m-2 day-1 in outdoor experiments by solar concentration without any other energy consumption. This work provides an up-and-coming pathway to realize highly efficient and sustainable clean water supply for off-grid and arid regions.

Spontaneous water oozing of a soft drain bed via energy-free atmospheric water harvesting

Atmospheric water harvesting has emerged as an efficient strategy for addressing the global challenge of freshwater scarcity. However, the in being energy-consuming water-collecting process has obstructed its practicality. In this work, a soft drain bed, which was composed of hydrophilic cloth and hygroscopic gel, has been demonstrated to capture atmospheric water effectively, followed by converting it into liquid water spontaneously and sustainably, under all-weather humidity conditions. Under the optimal working condition of 30°C with a relative humidity level of 75%, the bed can provide a spontaneous water oozing ability of 1.25 g (liquid water)/hour within the 8 h of working time. More importantly, after 5 working cycles, 80% of the oozing ability can be reserved, suggesting the high potential for practical freshwater supply application. The proposed design strategy is expected to provide new hints for the development of future energy-saving decentralized freshwater supply systems.

Assessing global drinking water potential from electricity-free solar water evaporation device

Universal and equitable access to affordable safely managed drinking water (SMDW) is a significant challenge and is highlighted by the United Nations' Sustainable Development Goals-6.1. However, SMDW coverage by 2030 is estimated to reach only 81% of the global population. Solar water evaporation (SWE) represents one potential method to ensure decentralized water purification, but its potential for addressing the global SMDW challenge remains unclear. We use a condensation-enhanced strategy and develop a physics-guided machine learning model for assessing the global potential of SWE technology to meet SMDW demand for unserved populations without external electricity input. We find that a condensation-enhanced SWE device (1 m2) can supply enough drinking water (2.5 L day-1) to 95.8% of the population lacking SMDW. SWE can help fulfill universal SMDW coverage by 2030 with an annual cost of 10.4 billion U.S. dollars, saving 66.7% of the current investment and fulfilling the SDG-6.1 goal.

Solar-driven water evaporation using a collaborative photothermal conversion material system based on carbonized waste polyphenylene sulfide and copper sulfide

Recently, water resources have become scarce due to the growing global population and human impact on the environment, coupled with the effects of climate change. For solving the problem of global freshwater shortage and increasing the value of discarded polyphenylene sulfide (PPS) filter bags, in this study, balsa wood was used as the base of a photothermal solar evaporator, chitosan solution was used as the binder, and the main photothermal conversion materials used were polyphenylene sulfide (CP) carbide and copper sulfide. In order to create synergistic photothermal conversion materials, freeze-drying and in situ precipitation were used to deposit the photothermal conversion materials on top of the balsa wood. The prepared CP/CuS-wood evaporator has excellent water evaporation performance and light conversion capability, with a water evaporation rate of 2.68 kg m-2 h-1 and a photothermal conversion efficiency of 93.2% under simulated one solar intensity irradiation. In addition, the evaporator can effectively remove organic dyes such as methylene blue and methyl orange. The evaporator's durability and seawater desalination capability have also been confirmed through seawater desalination experiments and outdoor tests. Studies have shown that solar interface photothermal evaporators are a viable solution for desalination and wastewater treatment. This eco-friendly, economically viable and stable photothermal evaporator mentioned in this paper has pioneering features and will be a new paradigm for desalination and wastewater treatment.

A solar-driven atmospheric water extractor for off-grid freshwater generation and irrigation

Solar-driven atmospheric water extraction (SAWE) is a sustainable technology for decentralized freshwater supply. However, most SAWE systems produce water intermittently due to the cyclic nature, with adoption hindered by complex design requirements or periodic manual operations. Herein, a fully passive SAWE system that can continuously produce freshwater under sunlight is presented. By optimizing the three-dimensional architecture to facilitate spontaneous mass transport and efficient energy utilization, this system can consistently produce 0.65 L m-2 h-1 of freshwater under 1-sun illumination at 90% relative humidity (RH) and functions in arid environments with an RH as low as 40%. We test the practical performance of a scaled-up system in Thuwal, Saudi Arabia over 35 days across two seasons. The system produces 2.0-3.0 L m-2 per day of freshwater during the summer and 1.0-2.8 L m-2 per day of freshwater during the fall, without requiring additional maintenance. Intriguingly, we demonstrate the system's potential for off-grid irrigation by successfully growing cabbage plants using atmospheric water. This passive SAWE system, harnessing solar energy to continuously extract moisture from air for drinking and irrigation, offers a promising solution to address the intertwined challenges of energy, water, and food supply, particularly for remote and water-scarce regions.

Chemistries and materials for atmospheric water harvesting

Atmospheric water harvesting (AWH) is recognized as a crucial strategy to address the global challenge of water scarcity by tapping into the vast reserves of atmospheric moisture for potable water supply. Within this domain, sorbents lie in the core of AWH technologies as they possess broad adaptability across a wide spectrum of humidity levels, underpinned by the cyclic sorption and desorption processes of sorbents, necessitating a multi-scale viewpoint regarding the rational material and chemical selection and design. This Invited Review delves into the essential sorption mechanisms observed across various classes of sorbent systems, emphasizing the water-sorbent interactions and the progression of water networks. A special focus is placed on the insights derived from isotherm profiles, which elucidate sorbent structures and sorption dynamics. From these foundational principles, we derive material and chemical design guidelines and identify key tuning factors from a structural-functional perspective across multiple material systems, addressing their fundamental chemistries and unique attributes. The review further navigates through system-level design considerations to optimize water production efficiency. This review aims to equip researchers in the field of AWH with a thorough understanding of the water-sorbent interactions, material design principles, and system-level considerations essential for advancing this technology.

Entangled Mesh Hydrogels with Macroporous Topologies via Cryogelation for Rapid Atmospheric Water Harvesting

Sorption-based atmospheric water harvesting (SAWH) is a promising technology to alleviate freshwater scarcity. Recently, hygroscopic salt-hydrogel composites (HSHCs) have emerged as attractive candidates with their high water uptake, versatile designability, and scale-up fabrication. However, achieving high-performance SAWH applications for HSHCs has been challenging because of their sluggish kinetics, attributed to their limited mass transport properties. Herein, a universal network engineering of hydrogels using a cryogelation method is presented, significantly improving the SAWH kinetics of HSHCs. As a result of the entangled mesh confinements formed during cryogelation, a stable macroporous topology is attained and maintained within the obtained entangled-mesh hydrogels (EMHs), leading to significantly enhanced mass transport properties compared to conventional dense hydrogels (CDHs). With it, corresponding hygroscopic EMHs (HEMHs) simultaneously exhibit faster moisture sorption and solar-driven water desorption. Consequently, a rapid-cycling HEMHs-based harvester delivers a practical freshwater production of 2.85 Lwater kgsorbents -1 day-1 via continuous eight sorption/desorption cycles, outperforming other state-of-the-art hydrogel-based sorbents. Significantly, the generalizability of this strategy is validated by extending it to other hydrogels used in HSHCs. Overall, this work offers a new approach to efficiently address long-standing challenges of sluggish kinetics in current HSHCs, promoting them toward the next-generation SAWH applications.

Innovative Insights into Water-Oxidation Mechanism: Investigating Birnessite's Reaction with Cerium(IV) Ammonium Nitrate

Developing Mn-based water-oxidation reaction (WOR) catalysts is key for renewable energy storage, utilizing Mn's abundance, cost-effectiveness, and natural role. Cerium(IV) ammonium nitrate (CAN) has been widely utilized as a sacrificial oxidant in the exploration of WOR catalysts. In this study, advanced techniques, such as X-ray absorption spectroscopy (XAS), in situ Raman spectroscopy, and in situ electron paramagnetic resonance (EPR), to delve into the WOR facilitated by CAN and birnessite were employed. XANES analysis has demonstrated that the average oxidation states (AOSs) of Mn in birnessite, a birnessite/CAN mixture, and in the birnessite/CAN mixture postwater addition are 3.7, 3.8, and 3.9, respectively. In situ Raman spectroscopy performed in the presence of birnessite and CAN revealed a distinct peak at 784 cm-1, which is attributed to Mn(IV)═O. A shift of this peak to 769 cm-1 in H218O confirms its association with Mn(IV)═O. No change in this peak was observed in D2O, further supporting the notion that it is linked to Mn(IV)═O rather than Mn-OH (D). Furthermore, EPR spectroscopy shows the presence of Mn(IV). It is suggested that the WOR mechanism initiates with the oxidation of birnessite by CAN, which enhances the concentration of Mn(IV) sites in the birnessite structure. Under acidic conditions, birnessite, enriched in Mn(IV), facilitates oxygen evolution and subsequently transitions into a form with reduced Mn(IV) levels. This process highlights the critical function of the Mn (hydr)oxide structure, similar to its role in the water-oxidizing complex of Photosystem II, where it serves as charge storage for oxidizing equivalents from CAN, paving the way for a four-electron reaction that drives the WOR.

Multi-biomimetic Double Interlaced Wetting Janus Surface for Efficient Fog Collection

Various methods to solve water scarcity have attracted increasing attention. However, most existing water harvesting schemes have a high demand for preparation methods and costs. Here, a multi-biomimetic double interlaced wetting Janus surface (DIWJS) was prepared by laser for effective fog collection. The as-prepared surfaces are composed of superhydrophilic points/hydrophobic substrates on the A-side and superhydrophilic stripes/hydrophobic substrates on the B-side. The interlaced wettability and superhydrophilic points on the A side are conducive to capture and permeation of droplets. The superhydrophilic stripes and interlaced wettability on the B-side are conducive to transportation and shedding of droplets. Therefore, the overall fog collection process is accelerated. The proposal of smart farm model validates broad application prospects of DIWJS. This work provides an advanced and multi-biomimetic surface and provides important insights for green, low-cost, and versatile strategies to solve water scarcity issues.

Unraveling a Stable 16-Ring Aluminophosphate DNL-11 through Three-Dimensional Electron Diffraction for Atmospheric Water Harvesting

Sorption-based atmospheric water harvesting (AWH) is a promising solution for addressing water scarcity. Developing cost-effective and stable water adsorbents with high water uptake capacity and a low-temperature regeneration requirement is a crucially important procedure. In this Communication, we present a novel and stable aluminophosphate (AlPO) molecular sieve (MS) named DNL-11 with 16-ring channels synthesized by using an affordable and commercialized organic structure directing agent (OSDA), whose crystallographic structure is elucidated by three-dimensional electron diffraction (3D ED). DNL-11 exhibits a significant water uptake capacity (189 mg/g) at a very low vapor pressure (5% relative humidity at 30 °C). In addition, most of the adsorbed water can be effortlessly removed by purging N2 at 25 °C under ambient pressure conditions. This may expand the possibility of AWH under extreme drought conditions.

Progress and perspectives of sorption-based atmospheric water harvesting for sustainable water generation: Materials, devices, and systems

Establishing alternative methods for freshwater production is imperative to effectively alleviate global water scarcity, particularly in land-locked arid regions. In this context, extracting water from the ubiquitous atmospheric moisture is an ingenious strategy for decentralized freshwater production. Sorption-based atmospheric water harvesting (SAWH) shows strong potential for supplying liquid water in a portable and sustainable way even in desert environments. Herein, the latest progress in SAWH technology in terms of materials, devices, and systems is reviewed. Recent advances in sorbent materials with improved water uptake capacity and accelerated sorption-desorption kinetics, including physical sorbents, polymeric hydrogels, composite sorbents, and ionic solutions, are discussed. The thermal designs of SAWH devices for improving energy utilization efficiency, heat transfer, and mass transport are evaluated, and the development of representative SAWH prototypes is clarified in a chronological order. Thereafter, state-of-the-art operation patterns of SAWH systems, incorporating intermittent, daytime continuous and 24-hour continuous patterns, are examined. Furthermore, current challenges and future research goals of this cutting-edge field are outlined. This review highlights the irreplaceable role of heat and mass transfer enhancement and facile structural improvement for constructing high-yield water harvesters.

Molecular driving forces for water adsorption in MOF-808: A comparative analysis with UiO-66

Metal-organic frameworks (MOFs), with their unique porous structures and versatile functionality, have emerged as promising materials for the adsorption, separation, and storage of diverse molecular species. In this study, we investigate water adsorption in MOF-808, a prototypical MOF that shares the same secondary building unit (SBU) as UiO-66, and elucidate how differences in topology and connectivity between the two MOFs influence the adsorption mechanism. To this end, molecular dynamics simulations were performed to calculate several thermodynamic and dynamical properties of water in MOF-808 as a function of relative humidity (RH), from the initial adsorption step to full pore filling. At low RH, the μ3-OH groups of the SBUs form hydrogen bonds with the initial water molecules entering the pores, which triggers the filling of these pores before the μ3-OH groups in other pores become engaged in hydrogen bonding with water molecules. Our analyses indicate that the pores of MOF-808 become filled by water sequentially as the RH increases. A similar mechanism has been reported for water adsorption in UiO-66. Despite this similarity, our study highlights distinct thermodynamic properties and framework characteristics that influence the adsorption process differently in MOF-808 and UiO-66.

When Polymorphism in Metal-Organic Frameworks Enables Water Sorption Profile Tunability for Enhancing Heat Allocation and Water Harvesting Performance

The development of thermally driven water-sorption-based technologies relies on high-performing water vapor adsorbents. Here, polymorphism in Al-metal-organic frameworks is disclosed as a new strategy to tune the hydrophilicity of MOFs. This involves the formation of MOFs built from chains of either trans- or cis- µ-OH-connected corner-sharing AlO4(OH)2 octahedra. Specifically, [Al(OH)(muc)] or MIP-211, is made of trans, trans-muconate linkers, and cis-µ-OH-connected corner-sharing AlO4(OH)2 octahedra giving a 3D network with sinusoidal channels. The polymorph MIL-53-muc has a tiny change in the chain structure that results in a shift of the step position of the water isotherm from P/P0 ≈ 0.5 in MIL-53-muc, to P/P0 ≈ 0.3 in MIP-211. Solid-state NMR and Grand Canonical Monte Carlo reveal that the adsorption occurs initially between two hydroxyl groups of the chains, favored by the cis-positioning in MIP-211, resulting in a more hydrophilic behavior. Finally, theoretical evaluations show that MIP-211 would allow achieving a coefficient of performance for cooling (COPc) of 0.63 with an ultralow driving temperature of 60 °C, outperforming benchmark sorbents for small temperature lifts. Combined with its high stability, easy regeneration, huge water uptake capacity, green synthesis, MIP-211 is among the best adsorbents for adsorption-driven air conditioning and water harvesting from the air.

Advanced Material Design and Engineering for Water-Based Evaporative Cooling

Water-based evaporative cooling is emerging as a promising technology to provide sustainable and low-cost cold to alleviate the rising global cooling demand. Given the significant and fast progress made in recent years, this review aims to provide a timely overview on the state-of-the-art material design and engineering in water-based evaporative cooling. The fundamental mechanisms and major components of three water-based evaporative cooling processes are introduced, including direct evaporative cooling, cyclic sorption-driven liquid water evaporative cooling (CSD-LWEC), and atmospheric water harvesting-based evaporative cooling (AWH-EC). The distinctive requirements on the sorbent materials in CSD-LWEC and AWH-EC are highlighted, which helps synthesize the literature information on the advanced material design and engineering for the purpose of improving cooling performance. The challenges and future outlooks on further improving the water-based evaporative cooling performance are also provided.

Hierarchical Engineering of Sorption-Based Atmospheric Water Harvesters

Harvesting water from air in sorption-based devices is a promising solution to decentralized water production, aiming for providing potable water anywhere, anytime. This technology involves a series of coupled processes occurring at distinct length scales, ranging from nanometer to meter and even larger, including water sorption/desorption at the nanoscale, condensation at the mesoscale, device development at the macroscale and water scarcity assessment at the global scale. Comprehensive understanding and bespoke designs at every scale are thus needed to improve the water-harvesting performance. For this purpose, a brief introduction of the global water crisis and its key characteristics is provided to clarify the impact potential and design criteria of water harvesters. Next the latest molecular-level optimizations of sorbents for efficient moisture capture and release are discussed. Then, novel microstructuring of surfaces to enhance dropwise condensation, which is favorable for atmospheric water generation, is shown. After that, system-level optimizations of sorbent-assisted water harvesters to achieve high-yield, energy-efficient, and low-cost water harvesting are highlighted. Finally, future directions toward practical sorption-based atmospheric water harvesting are outlined.

Self-Sustained Programmable Hygroelectronic Interfaces for Humidity-Regulated Hierarchical Information Encryption and Display

The emerging moisture-driven energy generation (MEG) technology opens up new possibilities for humidity-responsive materials, devices, and interdisciplinary opportunities in fields like information security. However, such potential remains untapped. Here, an original MEG structure with a hygroionic energy-conversion route by selective coating of ionic hygroscopic hydrogels on a carbon black surface is reported. The hygroionic route features a process in which the scavenged energy is stored in the electrical double layers formed at the interfaces between the ionic hydrogel and the carbon nanoparticles. The resultant electrical field developed across the hydrogel-coated wet carbon and the rest of the dry carbon area is thus durably lasted. Based on this unique structure, hygroelectronic information interfaces (HEII) for humidity-regulated information encryption and display are put forward by devising hydrogel patterns on a carbon platform. Further by tuning the hygroscopicity of the ionic hydrogels and incorporating encoding methods (e.g., Morse code), it is demonstrated that the HEII platform is programmable to carry different information in certain humidity ranges. Unlike those conventional anti-counterfeiting methods that optically reveal the hidden information once the required stimulus is provided, the new HEII serves as a hierarchical solution for high-security encryption and display.

Harvesting Energy from Atmospheric Water: Grand Challenges in Continuous Electricity Generation

Atmospheric water is ubiquitous on earth and extensively participates in the natural water cycle through evaporation and condensation. This process involves tremendous energy exchange with the environment, but very little of the energy has so far been harnessed. The recently emerged hydrovoltaic technology, especially moisture-induced electricity, shows great potential in harvesting energy from atmospheric water and gives birth to moisture energy harvesting devices. The device performance, especially the long-term operational capacity, has been significantly enhanced over the past few years. Further development; however, requires in-depth understanding of mechanisms, innovative materials, and ingenious system designs. In this review, beginning with describing the basic properties of water, the key aspects of the water-hygroscopic material interactions and mechanisms of power generation are discussed. The current material systems and advances in promising material development are then summarized. Aiming at the chief bottlenecks of limited operational time, advanced system designs that are helpful to improve device performance are listed. Especially, the synergistic effect of moisture adsorption and water evaporation on material and system levels to accomplish sustained electricity generation is discussed. Last, the remaining challenges are analyzed and future directions for developing this promising technology are suggested.

Hygroscopic-Microgels-Enabled Rapid Water Extraction from Arid Air

Sorbent-based atmospheric water harvesting (AWH) has emerged as a promising decentralized water-production technology to mitigate the freshwater crisis in arid areas. Hydrogels have been regarded as attractive sorbents due to their high water retention and tailorable polymer-water interactions. Yet, the kinetics of water sorption and desorption at low relative humidity (RH) shall be improved for their practical implementation. Here, hygroscopic microgels (HMGs) composed of hydroxypropyl cellulose (HPC) and hygroscopic salt are reported, which achieve a water uptake of ca. 0.5-0.8 g g-1 at 15-30% RH. HMGs enable rapid sorption-desorption kinetics owing to the short-distance diffusion in the microgels and hydrophilicity-hydrophobicity switching of the thermoresponsive HPC. To validate the feasibility of HMGs for moisture extraction, a potential daily water collection of up to equivalent 7.9-19.1 L kg-1 at low RH is demonstrated, enabled by 24-36 operation cycles per day based on the material-level experiments. With renewable raw materials and superior performance, HMGs provide a sustainable approach for rapid moisture extraction in arid climates.

Phospholipid Bilayer Inspired Sandwich Structural Nanofibrous Membrane for Atmospheric Water Harvesting and Selective Release

Atmospheric water harvesting (AWH) has been broadly exploited to meet the challenge of water shortage. Despite the significant achievements of AWH, the leakage of hydroscopic salt during the AWH process hinders its practical applications. Herein, inspired by the unique selective permeability of the phospholipid bilayer, a sandwich structural (hydrophobic-hydrophilic-hydrophobic) polyacrylonitrile nanofibrous membrane (San-PAN) was fabricated for AWH. The hydrophilic inner layer loaded with LiCl could capture water from the air. The hydrophobic microchannels in the outer layer could selectively allow the free transmission of gaseous water molecules but confine the hydroscopic salt solution in the hydrophilic layer, achieving continuous and recyclable water sorption/desorption. As demonstrated, the as-prepared AWH devices presented high-efficient adsorption kinetics from 1.66 to 4.08 g g-1 at 30% to 90% relative humidity. Thus, this work strengthens the understanding of the water transmission process along microchannels and provides insight into the practical applications of AWH.

Optimizing Salt Leakage Mitigation and Comparing Sorption-Desorption Characteristics of Polyacrylamide-Based Hydrogels

Solid hygroscopic materials are extensively utilized in diverse fields, including adsorption heat transfer, adsorption heat storage, atmospheric water harvesting (AWH), and air conditioning dehumidification. The efficacy and energy efficiency of these materials in practical applications are significantly influenced by their adsorption and desorption properties. Yet, the introduction of inorganic salts to boost adsorption performance can result in issues like salt leakage. In this research, we prepared a polyacrylamide hydrogel through free radical polymerization, and its water-absorbing capabilities were improved by incorporating the hygroscopic salt lithium chloride. We compared it to a salt-based porous adsorbent, AlFum-LiCl, which also exhibited strong water adsorption properties and the potential for large-scale production. While AlFum-LiCl suffered from limited pores and salt leakage during high water uptake, the optimized PAM-LiCl displayed superior water sorption capabilities, showing no salt leakage even at water uptake of up to 3.5 g/g. At 25 °C, PAM-LiCl achieved equilibrium water uptake of 1.26 g/g at 30% RH and 3.15 g/g at 75% RH. In this context, utilizing 20 g of PAM-LiCl for the AWH experiment yielded daily water outputs of 8.34 L/kg at 30% RH and 16.86 L/kg at 75% RH. The salt-optimized PAM-LiCl hydrogel offers the benefit of application in higher relative humidity environments without the risk of deliquescence, underscoring its promise for atmospheric water harvesting.

A review of the methods of harvesting atmospheric moisture

Moisture is an inherent constituent of air present across the world. The relative humidity varies with the change in temperature and climate specific to a region. In some regions of the world, there may be a relatively inadequate number of grains of moisture in the air in comparison with other regions. These factors widen the scope for the deployment of decentralized technology to capture water. The effectiveness in capturing moisture gains significance in these regions. Among the numerous forms of moisture, fog and dew are studied in depth. Over time, flora and fauna in different ecosystems have adapted to capture moisture as well as repel excesses of it according to their requirements. Therefore, bio-inspired studies and tailored engineering strategies have been incorporated in this review. Since efficient technologies are required at moisture-scarce locations, active moisture harvesting has also been studied. The use of innovative materials along with different energy sources to capture water is elaborated. The effects of climate change and environmental contamination on harvested moisture are therefore assessed. Community participation and economical use of harvested fog or dew influence the sustainability of moisture-capture projects. Therefore, this article also provides an insight into the services of decentralized water-harvesting projects run by diverse organizations and researchers across the globe.

Enhancing Solar-Driven Water Purification by Multiscale Biomimetic Evaporators Featuring Lamellar MoS2/GO Heterojunctions

Solar-powered steam generation holds a strong sustainability in facing the global water crisis, while the production efficiency and antifouling performance remain challenges. Inspired by river moss, a multiscale biomimetic evaporator is designed, where the key photothermal conversion film composed of lamellar MoS2/graphene oxides (GO) can significantly enhance the evaporation efficiency and solve the problem of fouling. First-level leaf-like MoS2/GO nanosheets, obtained by a modified hydrothermal synthesis with an assisted magnetic-field rotation stirring, are self-assembled into a second-level nanoporous film, which achieves an evaporation rate (ER) of 1.69 kg m-2 h-1 under 1 sun illumination and an excellent self-cleaning ability. The tertiary-bionic evaporator with a macroscopic crownlike shape further enhances the ER to 3.20 kg m-2 h-1, 189% above that of planar film, yielding 20.25 kg m2 of freshwater from seawater during a daytime exposure of 6 h. The exceptional outcomes originate from the macroscopic biomimetic design and the microscopic integration of heterojunction interfaces between the MoS2 and GO interlayers and the nanoporous surface. The biomimetic evaporator indicates a potential direction through surface/interface regulation of photothermal nanomaterials for water desalination.

Shaping the Water-Harvesting Behavior of Metal-Organic Frameworks Aided by Fine-Tuned GPT Models

We construct a data set of metal-organic framework (MOF) linkers and employ a fine-tuned GPT assistant to propose MOF linker designs by mutating and modifying the existing linker structures. This strategy allows the GPT model to learn the intricate language of chemistry in molecular representations, thereby achieving an enhanced accuracy in generating linker structures compared with its base models. Aiming to highlight the significance of linker design strategies in advancing the discovery of water-harvesting MOFs, we conducted a systematic MOF variant expansion upon state-of-the-art MOF-303 utilizing a multidimensional approach that integrates linker extension with multivariate tuning strategies. We synthesized a series of isoreticular aluminum MOFs, termed Long-Arm MOFs (LAMOF-1 to LAMOF-10), featuring linkers that bear various combinations of heteroatoms in their five-membered ring moiety, replacing pyrazole with either thiophene, furan, or thiazole rings or a combination of two. Beyond their consistent and robust architecture, as demonstrated by permanent porosity and thermal stability, the LAMOF series offers a generalizable synthesis strategy. Importantly, these 10 LAMOFs establish new benchmarks for water uptake (up to 0.64 g g-1) and operational humidity ranges (between 13 and 53%), thereby expanding the diversity of water-harvesting MOFs.

High-Efficient Microdroplet Harvesting and Detaching Inspired from Sarracenia Lid Trichome

Fog harvesting plays a pivotal role in harnessing atmospheric water resources and holds significant promise for alleviating global water scarcity. Nonetheless, enhancing harvesting efficiency remains a persistent challenge, especially concerning the rapid detachment of droplets from surfaces. In this study, we discovered that the trichomes of Sarracenia not only efficiently harvest and transport liquid but also quickly drain harvested liquid. We have elucidated the augmentation mechanism behind effective fog harvesting and drainage within the lid of Sarracenia. The trichomes facing the counterflow can enhance fog harvesting efficiency by 80% through air-flow-assisted spreading of liquid film. The wedge corner generated by the interface between hydrophilic and hydrophobic surfaces, coupled with the reduction of cross-sectional angles, diminishes the adhesive force of liquid droplets, fosters droplet spheroidization, and substantially facilitates droplet detachment. In addition, the quantitative detachment of droplets can be achieved by adjusting the cross-sectional angle and wetting gradient. This integrated structure combining efficient condensation and detachment has diverse applications in cooling towers and seawater desalination.

Sustainable Seawater Desalination and Energy Management: Mechanisms, Strategies, and the Way Forward

Solar-driven desalination systems have been recognized as an effective technology to address the water crisis. Recently, evaporators prepared based on advanced manufacturing technologies have emerged as a promising tool in enhancing ocean energy utilization. In this review, we discussed the thermal conversion, energy flow, salt deposition mechanisms, and design strategies for solar-driven desalination systems, and explored how to improve the desalination performance and energy use efficiency of the systems through advanced manufacturing technologies. In future perspectives, we determined the feasibility of coupling solar-driven solar desalination systems with multi-stage energy utilization systems and emerging artificial intelligence technologies, for which conclusions are given and new directions for future desalination system development are envisioned. Finally, exciting opportunities and challenges in the face of basic research and practical implementation are discussed, providing promising solutions and blueprints for green and novel desalination technologies while achieving sustainable development.

Pumping and sliding of droplets steered by a hydrogel pattern for atmospheric water harvesting

Atmospheric water harvesting is an emerging strategy for decentralized and potable water supplies. However, water nucleation and microdroplet coalescence on condensing surfaces often result in surface flooding owing to the lack of a sufficient directional driving force for shedding. Herein, inspired by the fascinating properties of lizards and catfish, we present a condensing surface with engineered hydrogel patterns that enable rapid and sustainable water harvesting through the directional pumping and drag-reduced sliding of water droplets. The movement of microscale condensed droplets is synergistically driven by the surface energy gradient and difference in Laplace pressure induced by the arch hydrogel patterns. Meanwhile, the superhydrophilic hydrogel surface can strongly bond inner-layer water molecules to form a lubricant film that reduces drag and facilitates the sliding of droplets off the condensing surface. Thus, this strategy is promising for various water purification techniques based on liquid-vapor phase-change processes.

Hydratable Core-Shell Polymer Networks for Atmospheric Water Harvesting Powered by Sunlight

The development of technologies to enable fresh water harvesting from atmospheric moisture could help overcome the problem of potable water scarcity. Here, an atmospheric water harvesting (AWH) device is assembled in a core-shell structure, with the core consisting of networks of alginate (Alg) and polyaniline (PANI) and the outer layer consisting of thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) modified with sulfonic acid groups (SPNIPAM) to increase the water adsorption at low relative humidity. The resulting hydrogel, modified with lithium chloride (LiCl) for increased water storage capacity (SPNIPAM-Li-PANIAlg), displays a similar lower critical solution temperature to pristine PNIPAM (32 °C) while affording a 15-fold higher water capture ratio, and releases water upon exposure to sunlight at intensities less than 1 kW m-2 . The developed AWH system is capable of harvesting 6.5 L of water per kilogram in a single daily absorption/desorption cycle under sunlight and can operate at relative humidity levels as low as 17% with no additional external energy input. The thermo-responsive hydrogel SPNIPAM-Li-PANIAlg exhibits excellent stability during natural sunlight-driven absorption/desorption cycles for at least 30 days, and allows sustainable harvesting of over 28.3 L kg-1 from a moisture-rich environment by means of multiple absorption/desorption cycles.

Sorption-Based Atmospheric Water Harvesting: Materials, Components, Systems, and Applications

Freshwater scarcity is a global challenge posing threats to the lives and daily activities of humankind such that two-thirds of the global population currently experience water shortages. Atmospheric water, irrespective of geographical location, is considered as an alternative water source. Sorption-based atmospheric water harvesting (SAWH) has recently emerged as an efficient strategy for decentralized water production. SAWH thus opens up a self-sustaining source of freshwater that can potentially support the global population for various applications. In this review, the state-of-the-art of SAWH, considering its operation principle, thermodynamic analysis, energy assessment, materials, components, different designs, productivity improvement, scale-up, and application for drinking water, is first extensively explored. Thereafter, the practical integration and potential application of SAWH, beyond drinking water, for wide range of utilities in agriculture, fuel/electricity production, thermal management in building services, electronic devices, and textile are comprehensively discussed. The various strategies to reduce human reliance on natural water resources by integrating SAWH into existing technologies, particularly in underdeveloped countries, in order to satisfy the interconnected needs for food, energy, and water are also examined. This study further highlights the urgent need and future research directions to intensify the design and development of hybrid-SAWH systems for sustainability and diverse applications.

Molecularly confined hydration in thermoresponsive hydrogels for efficient atmospheric water harvesting

Water scarcity is a pressing global issue, requiring innovative solutions such as atmospheric water harvesting (AWH), which captures moisture from the air to provide potable water to many water-stressed areas. Thermoresponsive hydrogels, a class of temperature-sensitive polymers, demonstrate potential for AWH as matrices for hygroscopic components like salts predominantly due to their relatively energy-efficient desorption properties compared to other sorbents. However, challenges such as limited swelling capacity due to the salting-out effect and difficulty in more complete water release hinder the effectiveness of conventional hydrogel sorbents. To overcome these limitations, we introduce molecularly confined hydration in thermoresponsive hydrogels by employing a bifunctional polymeric network composed of hygroscopic zwitterionic moieties and thermoresponsive moieties. Here, we show that this approach ensures stable water uptake, enables water release at relatively low temperatures, and exhibits rapid sorption-desorption kinetics. Furthermore, by incorporating photothermal absorbers, the sorbent can achieve solar-driven AWH with comparable water release performance. This work advances the design of AWH sorbents by introducing molecularly confined hydration in thermoresponsive hydrogels, leading to a more efficient and sustainable approach to water harvesting. Our findings offer a potential solution for advanced sorbent design with comprehensive performance to mitigate the freshwater crisis.

All-Day Multicyclic Atmospheric Water Harvesting Enabled by Polyelectrolyte Hydrogel with Hybrid Desorption Mode

Sorption-based atmospheric water harvesting (AWH) is a promising approach for mitigating worldwide water scarcity. However, reliable water supply driven by sustainable energy regardless of diurnal variation and weather remains a long-standing challenge. To address this issue, a polyelectrolyte hydrogel sorbent with an optimal hybrid-desorption multicyclic-operation strategy is proposed, achieving all-day AWH and a significant increase in daily water production. The polyelectrolyte hydrogel possesses a large interior osmotic pressure of 659 atm, which refreshes sorption sites by continuously migrating the sorbed water within its interior, and thus enhancing sorption kinetics. The charged polymeric chains coordinate with hygroscopic salt ions, anchoring the salts and preventing agglomeration and leakage, thereby enhancing cyclic stability. The hybrid desorption mode, which couples solar energy and simulated waste heat, introduces a uniform and adjustable sorbent temperature for achieving all-day ultrafast water release. With rapid sorption-desorption kinetics, an optimization model suggests that eight moisture capture-release cycles are capable of achieving high water yield of 2410 mLwater kgsorbent -1 day-1 , up to 3.5 times that of single-cyclic non-hybrid modes. The polyelectrolyte hydrogel sorbent and the coupling with sustainable energy driven desorption mode pave the way for the next-generation AWH systems, significantly bringing freshwater on a multi-kilogram scale closer.

Simultaneous Solar-Thermal Desalination and Catalytic Degradation of Wastewater Containing Both Salt Ions and Organic Contaminants

Although solar steam generation is promising in generating clean water by desalinating seawater, it is powerless to totally degrade organic contaminants in the seawater. Herein, solar steam generation and catalytic degradation are integrated to generate clean water by simultaneous solar-driven desalination and catalytic degradation of wastewater containing both salt ions and organic contaminants. Stepwise decoration of three-dimensional nickel foam with polypyrrole, reduced graphene oxide (RGO), and cobalt phosphate is realized to obtain polypyrrole/RGO/cobalt phosphate/nickel foam (PGCN) hybrids for solar-driven desalination and catalytic degradation of wastewater containing antibiotics and salt ions. The oxygen-containing groups of the RGO integrated with the porous nickel foam make the porous PGCN hybrid hydrophilic and ensure the upward transport of water to the evaporation surface, and the oxygen vacancies of the cobalt phosphate allow the PGCN to generate abundant highly active singlet oxygen that could still exhibit excellent catalytic degradation performances in the high salinity and highly alkaline environment of seawater. In addition to the high solar light absorbance and satisfactory solar-thermal conversion efficiency of polypyrrole and RGO, the thermally conductive nickel foam skeleton can effectively transfer the heat generated by the solar-thermal energy conversion to the adjacent cobalt phosphate catalyst and nearby wastewater, achieving a solar-thermal-promoted catalytic degradation of organic contaminants. Therefore, a high pure water evaporation rate of 2.08 kg m-2 h-1 under 1 sun irradiation and 100% catalytic degradation of Norfloxacin and dyes are achieved. The PGCN hybrid is highly efficient in purifying seawater containing 10 ppm Norfloxacin and simultaneously achieves a high purification efficiency of 100 kg m-2 h-1.

Practical approach of As(V) adsorption by fabricating biochar with low basicity from FeCl3 and lignin

One of the main challenges of biochar application for environmental cleanup is rise of pH in water or soil due to high ash and alkali metal contents in the biochar. While this intrinsic property of biochar is advantageous in alleviating soil and water acidity, it severely impairs the affinity of biochar toward anionic contaminants such as arsenic. This study explored a technical approach that can reduce the basicity of lignin-based biochar by utilizing FeCl₃ during production of biochar. Three types of biochar were produced by co-pyrolyzing feedstock composed of different combinations of lignin, red mud (RM), and FeCl₃, and the produced biochar samples were applied to adsorption of As(V). The biochar samples commonly possessed porous carbon structure embedded with magnetite (Fe₃O₄) particles. The addition of FeCl₃ in the pyrolysis feedstock had a notable effect on reducing basicity of the biochar to yield significantly lower solution pH values than the biochar produced without FeCl₃ addition. The extent of As(V) removal was also closely related to the final solution pH and the greatest As(V) removal (>77.6%) was observed for the biochar produced from co-pyrolysis of lignin, RM, and FeCl₃. The results of adsorption kinetics and isotherm experiments, along with x-ray spectroscopy (XPS), strongly suggested adsorption of As(V) occurred via specific chemical reaction (chemisorption) between As(V) and Fe-O functional groups on magnetite. Thus, the overall results suggest the use of FeCl₃ is a feasible practical approach to control the intrinsic pH of biochar and impart additional functionality that enables effective treatment of As(V).

Sustainable cooling with water generation

Dual-use devices offer a different path for more-sustainable living.

Water vapour and gas induced phase transformations in an 8-fold interpenetrated diamondoid metal-organic framework

In this work, we report the synthesis, structural characterisation and sorption properties of an 8-fold interpenetrated diamondoid (dia) metal-organic framework (MOF) that is sustained by a new extended linker ligand, [Cd(Imibz)₂], X-dia-2-Cd, HImibz or 2 = 4-((4-(1H-imidazol-1-yl)phenylimino)methyl)benzoic acid. X-dia-2-Cd was found to exhibit reversible single-crystal-to-single-crystal (SC-SC) transformations between four distinct phases: an as-synthesised (from N,N-dimethylformamide) wide-pore phase, X-dia-2-Cd-α; a narrow-pore phase, X-dia-2-Cd-β, formed upon exposure to water; a narrow-pore phase obtained by activation, X-dia-2-Cd-γ; a medium-pore CO₂-loaded phase X-dia-2-Cd-δ. While the space group remained constant in the four phases, the cell volumes and calculated void space ranged from 4988.7 ų and 47% (X-dia-2-Cd-α), respectively, to 3200.8 ų and 9.1% (X-dia-2-Cd-γ), respectively. X-dia-2-Cd-γ also exhibited a water vapour-induced structural transformation to the water-loaded X-dia-2-Cd-β phase, resulting in an S-shaped sorption isotherm. The inflection point occurred at 18% RH with negligible hysteresis on the desorption profile. Water vapour temperature-humidity swing cycling (60% RH, 300 K to 0% RH, 333 K) indicated hydrolytic stability of X-dia-2-Cd and working capacity was retained after 128 cycles of sorbent regeneration. CO₂ (at 195 K) was also observed to induce a structural transformation in X-dia-2-Cd-γ and in situ PXRD studies at 1 bar of CO₂, 195 K revealed the formation of X-dia-2-Cd-δ, which exhibited 31% larger unit cell volume than X-dia-2-Cd-γ.

Broadband Solar Metamaterial Absorbers Empowered by Transformer-Based Deep Learning

The research of metamaterial shows great potential in the field of solar energy harvesting. In the past decade, the design of broadband solar metamaterial absorber (SMA) has attracted a surge of interest. The conventional design typically requires brute-force optimizations with a huge sampling space of structure parameters. Very recently, deep learning (DL) has provided a promising way in metamaterial design, but its application on SMA development is barely reported due to the complicated features of broadband spectrum. Here, this work develops the DL model based on metamaterial spectrum transformer (MST) for the powerful design of high-performance SMAs. The MST divides the optical spectrum of metamaterial into N patches, which overcomes the severe problem of overfitting in traditional DL and boosts the learning capability significantly. A flexible design tool based on free customer definition is developed to facilitate the real-time on-demand design of metamaterials with various optical functions. The scheme is applied to the design and fabrication of SMAs with graded-refractive-index nanostructures. They demonstrate the high average absorptance of 94% in a broad solar spectrum and exhibit exceptional advantages over many state-of-the-art counterparts. The outdoor testing implies the high-efficiency energy collection of about 1061 kW h m^-2 from solar radiation annually. This work paves a way for the rapid smart design of SMA, and will also provide a real-time developing tool for many other metamaterials and metadevices.

Porous Materials for Atmospheric Water Harvesting

Atmospheric Water Harvesting (AWH) using porous adsorbents is emerging as a promising solution to combat water shortage. Thus, a clearer understanding of the developing trends and optimization strategies of different porous adsorbents can be extremely helpful. Therefore, in this concept, the different types of porous adsorbents and AWH devices are briefly introduced with a focus on the factors that influence the static and kinetic properties of porous adsorbents and their respective optimization strategies. In addition, the fast transport characteristics of water molecules in micropores are studied from the perspective of superfluidity as part of the analysis of the kinetic properties of porous adsorbents. Finally, the future development of porous materials for AWH and the accompanying challenges are summarized.