Compositions and antimicrobial properties of binary ZnO-CuO nanocomposites encapsulated calcium and carbon from Calotropis gigantea targeted for skin pathogens

Green synthesis of trimetallic CuO/Ag/ZnO nanocomposite using Ziziphus spina-christi plant extract: characterization, statistically experimental designs, and antimicrobial assessment

In this study, Ziziphus spina christi leaves was used to synthesize a trimetallic CuO/Ag/ZnO nanocomposite by a simple and green method. Many characterizations e.g. FTIR, UV-vis DRS, SEM-EDX, TEM, XRD, zeta-size analysis, and DLS, were used to confirm green-synthesized trimetallic CuO/Ag/ZnO nanocomposite. The green, synthesized trimetallic CuO/Ag/ZnO nanocomposite exhibited a spherical dot-like structure, with an average particle size of around 7.11 ± 0.67 nm and a zeta potential of 21.5 mV. An extremely homogeneous distribution of signals, including O (79.25%), Cu (13.78%), Zn (4.42%), and Ag (2.55%), is evident on the surface of green-synthetic nanocomposite, according to EDX data. To the best of our knowledge, this is the first study to effectively use an industrially produced green trimetallic CuO/Ag/ZnO nanocomposite as a potent antimicrobial agent by employing different statistically experimental designs. The highest yield of green synthetic trimetallic CuO/Ag/ZnO nanocomposite was (1.65 mg/mL), which was enhanced by 1.85 and 5.7 times; respectively, by using the Taguchi approach in comparison to the Plackett-Burman strategy and basal condition. A variety of assays techniques were utilized to evaluate the antimicrobial capabilities of the green-synthesized trimetallic CuO/Ag/ZnO nanocomposite at a 200 µg/mL concentration against multidrug-resistant human pathogens. After a 36-h period, the tested 200 µg/mL of the green-synthetic trimetallic CuO/Ag/ZnO nanocomposite effectively reduced the planktonic viable counts of the studied bacteria, Escherichia coli and Staphylococcus aureus, which showed the highest percentage of biofilm reduction (98.06 ± 0.93 and 97.47 ± 0.65%; respectively).

Investigation of antibacterial and anticancer activities of copper, aluminum and nickel doped zinc sulfide nanoparticles

First time compared the different metals doped ZnS nanoparticles for antibacterial and liver cancer cell line. In this study, copper, aluminum and nickel doped ZnS NPs were synthesized via co-precipitation method. The XRD analysis was confirmed the presence of cubic crystal structure and crystallite size decreased from 6 to 3 nm with doping elements. While as SEM micro-grains were revealed slightly irregular and agglomerated morphology with the presence of dopant elements. The presence of different dopant elements such as Cu, Al and Ni in ZnS NPs was identified via EDX analysis. The FTIR results demonstrate various vibrational stretching and bending modes attached to the surface of ZnS nanomaterials. After that the well diffusion method was used to conduct in-vitro bioassays for evaluation of antibacterial and anticancer activities against E.coli and B.cereus, as well as HepG2 liver cancer cell line. Our findings unveil exceptional results with maximum inhibition zone of approximately 9 to 23 mm observed against E.coli and 12 to 27 mm against B.cereus, respectively. In addition, the significant reduction in cell viability was achieved against the HepG2 liver cancer cell line. These favorable results highlight the potential of Ni doped ZnS NPs for various biomedical applications. In future, the doped ZnS nanomaterials will be suitable for hyperthermia therapy and wound healing process.

Psidium guajava-mediated green synthesis of Fe-doped ZnO and Co-doped ZnO nanoparticles: a comprehensive study on characterization and biological applications

The efficacy of nanoparticles (NPs) in healthcare applications hinges on their biocidal activity and biocompatibility. This research is dedicated to green-synthesized NPs with potent biocidal properties, aiming for high inhibition rates in bacterial infections and offering a multifunctional application, including potential use in anticancer therapy, in comparison to traditional antibiotics. The present study focuses on synthesis of zinc oxide (ZnO) nanoparticles (NPs), including iron-doped ZnO (GZF) and cobalt-doped ZnO (GZC), using the green co-precipitation method involving Psidium guajava (P. guajava) leaf extract. The physicochemical properties of the synthesized NPs were analyzed using various characterization techniques. The antibacterial and anticancer activity depends on the generation of reactive oxygen species (ROS), particle size, surface area, oxygen vacancy, Zn2+ release, and diffusion ability. The antibacterial activity of the synthesized NPs was tested against various Gram-positive (Streptococcus pneumoniae (S. pneumoniae), Bacillus subtilis (B. subtilis) and Gram-negative (Klebsiella pneumoniae (K. pneumoniae), and Pseudomonas aeruginosa (P. aeruginosa) bacterial strains. The zone of inhibition showed higher activity of GZC (18-20 mm) compared to GZF (16-19 mm) and GZO (11-15 mm) NPs. Moreover, anticancer studies against blood cancer cell line (MOLT-4) showed half-maximal inhibitory concentration of 11.3 μg/mL for GZC compared to GZF and GZO NPs with 12.1 μg/mL and 12.5 μg/mL, respectively. Cytotoxicity assessments carried out on the fibroblast L929 cell line indicated that GZO, GZF, and GZC NPs demonstrated cell viabilities of 85.43%, 86.66%, and 88.14%, respectively. Thus, green-synthesized GZC NPs hold promise as multifunctional agents in the biomedical sector.

Ferula latisecta gels for synthesis of zinc/silver binary nanoparticles: antibacterial effects against gram-negative and gram-positive bacteria and physicochemical characteristics

This study explores the potential antibacterial applications of zinc oxide nanoparticles (ZnO NPs) enhanced with silver (Ag) using plant gel (ZnO-AgO NPs). The problem addressed is the increasing prevalence of pathogenic bacteria and the need for new, effective antimicrobial agents. ZnO NPs possess distinctive physicochemical properties that enable them to selectively target bacterial cells. Their small size and high surface area-to-volume ratio allow efficient cellular uptake and interaction with bacterial cells. In this study, the average size of the synthesized ZnO-Ag nanoparticles was 77.1 nm, with a significant standard deviation of 33.7 nm, indicating a wide size distribution. The nanoparticles demonstrated remarkable antibacterial efficacy against gram-negative and gram-positive bacteria, with inhibition zones of 14.33 mm for E. coli and 15.66 mm for B. subtilis at a concentration of 300 µg/ml. Minimum inhibitory concentrations (MIC) were determined to be 100 µg/ml for E. coli and 75 µg/ml for S. saprophyticus. Additionally, ZnO-Ag NPs exhibited excellent biocompatibility, making them appropriate for various pharmacological uses. This study utilizes Ferula latisecta gels, offering a sustainable and eco-friendly approach to nanoparticle synthesis. Incorporating of Ag into ZnO NPs significantly enhances their antimicrobial properties, with the combined results showing great inhibition effects on pathogenic microbes. The findings suggest that ZnO-Ag NPs could be a promising candidate for addressing the challenges posed by drug-resistant bacterial infections and enhancing antimicrobial treatments.

Carica Papaya leaf-infused metal oxide nanocomposite: a green approach towards water treatment and antibacterial applications

This study successfully synthesized ZnO-CuO nanocomposite using the hydrothermal method with Carica papaya leaf extract. The incorporation of the leaf extract significantly enhanced the nanocomposite properties, a novel approach in scientific research. Characterization techniques, including X-ray diffraction, Fourier Transmission Infrared spectroscopy, and Scanning Electron Microscopy with Energy Dispersive X-Ray Analysis, confirmed a cubic crystal structure with an average size of 22.37 nm. The Fourier Transmission Infrared spectrum revealed distinctive vibrations at 627, 661, and 751 cm-1 corresponding to ZnO-CuO nanocomposite corresponding to stretching and vibration modes. SEM images confirmed a cubic-like and irregular structure. The nanocomposite exhibited outstanding photocatalytic activity, degrading methylene blue dye by 96.73% within 120 min under visible light. Additionally, they showed significant antimicrobial activity, inhibiting Staphylococcus aureus (20 mm) and Klebsiella pneumonia (17 mm). The results highlight the efficiency of Carica papaya leaf-derived ZnO-CuO nanocomposite for environmental and health challenges.

Direct Z-scheme heterojunction impregnated MoS2-NiO-CuO nanohybrid for efficient photocatalyst and dye-sensitized solar cell

In this present work, the preparation of ternary MoS2-NiO-CuO nanohybrid by a facile hydrothermal process for photocatalytic and photovoltaic performance is presented. The prepared nanomaterials were confirmed by physio-chemical characterization. The nanosphere morphology was confirmed by electron microscopy techniques for the MoS2-NiO-CuO nanohybrid. The MoS2-NiO-CuO nanohybrid demonstrated enhanced crystal violet (CV) dye photodegradation which increased from 50 to 95% at 80 min; The degradation of methyl orange (MO) dye increased from 56 to 93% at 100 min under UV-visible light irradiation. The trapping experiment was carried out using different solvents for active species and the Z-Scheme photocatalytic mechanism was discussed in detail. Additionally, a batch series of stability experiments were carried out to determine the photostability of materials, and the results suggest that the MoS2-NiO-CuO nanohybrid is more stable even after four continuous cycles of photocatalytic activity. The MoS2-NiO-CuO nanohybrid delivers photoconversion efficiency (4.92%) explored efficacy is 3.8 times higher than the bare MoS2 (1.27%). The overall results indicated that the MoS2-NiO-CuO nanohybrid nanostructure could be a potential candidate to be used to improve photocatalytic performance and DSSC solar cell applications as well.

Immobilized lipase enzyme on green synthesized magnetic nanoparticles using Psidium guava leaves for dye degradation and antimicrobial activities

Zinc ferrite nanoparticles (ZnF NPs) were synthesized by a green method using Psidium guava Leaves extract and characterized via structural and optical properties. The surface of ZnF NPs was stabilized with citric acid (CA) by a direct addition method to obtain (ZnF-CA NPs), and then lipase (LP) enzyme was immobilized on ZnF-CA NPs to obtain a modified ZnF-CA-LP nanocomposite (NCs). The prepared sample's photocatalytic activity against Methylene blue dye (MB) was determined. The antioxidant activity of ZnF-CA-LP NCs was measured using 1,1-diphenyl-2-picryl hydrazyl (DPPH) as a source of free radicals. In addition, the antibacterial and antibiofilm capabilities of these substances were investigated by testing them against gram-positive Staphylococcus aureus (S. aureus ATCC 25923) and gram-negative Escherichia coli (E. coli ATCC 25922) bacterial strains. The synthesized ZnF NPs were discovered to be situated at the core of the material, as determined by XRD, HRTEM, and SEM investigations, while the CA and lipase enzymes were coated in this core. The ZnF-CA-LP NCs crystallite size was around 35.0 nm at the (311) plane. Results obtained suggested that 0.01 g of ZnF-CA-LP NCs achieved 96.0% removal of 5.0 ppm of MB at pH 9.0. In-vitro zone of inhibition (ZOI) and minimum inhibitory concentration (MIC) results verified that ZnF-CA-LP NCs exhibited its encouraged antimicrobial activity against S. aureus and E. coli (20.0 ± 0.512, and 27.0 ± 0.651 mm ZOI, respectively) & (1.25, and 0.625 μg/ml MIC, respectively). ZnF-CA-LP NPs showed antibiofilm percentage against S. aureus (88.4%) and E. coli (96.6%). Hence, ZnF-CA-LP NCs are promising for potential applications in environmental and biomedical uses.

Physical characterization, biocompatibility, and antimicrobial activity of polyvinyl alcohol/sodium alginate blend doped with TiO2 nanoparticles for wound dressing applications

The ability of wound dressing materials to tackle skin pathogens colonization that is associated with open wound infections is limited. Recently, green-synthesized metal oxide nanoparticles has received a lot of attention to overcome this limitation. However, titanium dioxide nanoparticles (TiO2-NPs) exhibit exceptional antibacterial properties. In this work, several concentrations (0, 1, 3, and 5 wt.%) of TiO2 NPs prepared using Aloe vera leaf extract were added to a blend of polyvinyl alcohol and sodium alginate (PVA:SA). This nanocomposite was designed to enhance the healing process of wounds. The interaction between the PVA:SA composite and the TiO2 NPs was confirmed by FTIR. The thermal behavior of the nanocomposite films was investigated using DSC and TGA. The experimental results indicate that the glass transition temperatures of the nanocomposites increased by increasing the added amount of TiO2 NPs to be 53.7 °C (1 wt.%), 55.8 °C (3 wt.%), and 60.6 °C (5 wt.%), which were consistently lower than the glass transition temperature of the matrix material (69.6 °C). The Dynamic Mechanical Analysis was examined. The nanocomposite doped with 5 wt.% of TiO2 NPs detected a high storage modulus (21.6 × 108). Based on swelling and degradation studies, the prepared PVA:SA:TiO2 nanocomposite films have an excellent swelling rate, and the inclusion of TiO2 NPs increases the stability of the polymeric matrix. The PVA:SA:TiO2 nanocomposite films exhibited a superior antibacterial efficacy against Gram-positive bacteria such as Bacillus cereus and Staphylococcus aureus, compared to their effectiveness against Gram-negative bacteria like Escherichia coli. Moreover, the nanocomposite films were biocompatible with Human Skin Fibroblast. Therefore, the developed PVA:SA:TiO2 nanocomposite films suit wound dressing applications.

Blood proteins self-assembly, staphylococcal enterotoxins-interaction, antibacterial synergistic activities of biogenic carbon/FeSO4/Cu/CuO nanocomposites modified with three antibiotics

INTRODUCTION

Nanocomposites based on copper, iron, and carbon materials are novel nanomaterials with both antibacterial and biocompatibility properties considerable to fight against multidrug-resistant bacteria.

METHODS

In this study, phytogenic carbon/FeSO4/Cu/CuO nanocomposites modified by three antibiotics including tetracycline, amoxicillin, and penicillin were employed to hinder antibiotic resistant bacteria of Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. Interaction of albumin and hemoglobin as major blood proteins with these nanocomposites were evaluated by SEM, FTIR, and AFM techniques. As in silico study, molecular docking properties of staphylococcal enterotoxin toxin A and B with (Z)-α-Bisabolene epoxide, (E)-Nerolidol, α-Cyperone, daphnauranol C, nootkatin, and nootkatone as major secondary metabolites of Daphne mucronata were obtained by AutoDock Vina program.

RESULTS

Physicochemical characterization of nanocomposites showed (Zeta potential (- 5.09 mV), Z-average (460.2 d.nm), polydispersity index (0.293), and size range of 44.58 ± 6.78 nm). Results of both in vitro and in silico surveys disclosed significant antibacterial activity of antibiotic functionalized carbon/FeSO4/Cu/CuO nanocomposites compared to antibiotics alone towards Gram-negative and Gram-positive bacteria.

CONCLUSION

Synergistic activity of bio-fabricated carbon/FeSO4/Cu/CuO nanocomposites with antibiotics may be affected by main parameters of concentration and ratio of antibacterial agents, physicochemical properties of nanocomposites, bacterial type (Gram-negative or Gram-positive), antibacterial mechanisms, and chemical structure of antibiotics.

Fabrication and evaluation of vitamin doped Zno/AgNPs nanocomposite based wheat gluten films: a promising findings for burn wound treatment

Burn wound treatment remains a significant issue in wound care management especially when multidrug resistant bacterial infection and accumulation are present. Delayed wound healing is mostly due to ineffectiveness of commercially available wound dressings that protects the wound but less efficient in healing perspective. Therefore, nano-based wound dressing might be efficient solution for wound healing management. The present study reports the fabrication and evaluation of zinc oxide (ZnO) or silver nanoparticles (Ag NPs) capped with vitamin A or E nanocomposite that were incorporated in wheat gluten (WG) films. The chemical structure, phase purity, and morphological features confirmed the successful coating of NPs by vitamins A and E and their interaction with WG during film casting. The maximum swelling response was observed by NPs vitamin composite WG films than control films while slow release of vitamins and NPs from films was observed up to 24 h. WG films either carrying ZnO or Ag NPs, and vitamin A or E demonstrated significant antioxidant and antibacterial potential. The NPs-vitamin composite loaded WG films showed wound contraction within 14 days during in vivo burn wound healing experiments on mice model. The rates of wound healing, re-epithelialization, collagen deposition with fibroblast regeneration, adipocytes, and hair follicle development were observed through visual and histopathological examination. The study reveals that vitamin A or E doped ZnO or Ag NPs fabricated in WG can be efficiently used against burn wounds due to their physiochemical and biological properties. Furthermore the biocompatible nature and biodegradable potential make the films more prone to mankind maneuver for initial protection and healing remedy.

Optically amended biosynthesized crystalline copper-doped ZnO for enhanced antibacterial activity

The emergence and re-emergence of antibiotic-resistant bacteria is a potential threat to treating infectious diseases. This study employed a nanometer-scale green synthesis using an extract of Solanum incanum leaves to obtain nanoparticles (NPs) and nanocomposites (NCs) possessing antibacterial properties. The FESEM-EDS elemental mapping analysis proved the novelty of the green synthesis approach in synthesizing a copper-doped ZnO NCs with good dopant distribution. The crystallinity and ZnO bandgap were adjusted by extrinsic copper doping in the ZnO lattice. The optical property adjustments from 3.04 to 2.97 eV for indirect Kubelka-Munk functions were confirmed from DRS-UV-vis analysis. The dopant inclusion in the host lattice was also confirmed by the angle shift on the XRD pattern analysis relative to single ZnO. In addition to doping, the XRD pattern analysis also showed the development of CuO crystals. The lattice fringe values from HRTEM analysis confirmed the existence of both CuO and ZnO crystals with local heterojunctions. Doping and heterojunctions have crucial values in charge transfer and visible light harvesting behaviour, as proved by the PL analysis. The synergistic effects of the doped NCs showed greater antibacterial activity against both Gram-positive and Gram-negative bacteria as a result of more ROS generation through the bacteria-cell-catalyst interaction and release of metal ions. The antioxidant potential of the doped NCs was found to be higher than that of single NPs, using the 2,2-diphenyl-1-picrylhydrazyl free radical scavenging assay and is expected to impart protective effects to the host cells by scavenging destructive free radicals. Thus, the overall analysis leads to the conclusion that the potentiality of synthesized materials has a future outlook for biological applications, especially in the development of antimicrobials to combat antibiotic-resistant bacteria and microbes.

Impact of Diverse Parameters on the Physicochemical Characteristics of Green-Synthesized Zinc Oxide-Copper Oxide Nanocomposites Derived from an Aqueous Extract of Garcinia mangostana L. Leaf

Compared to conventional metal oxide nanoparticles, metal oxide nanocomposites have demonstrated significantly enhanced efficiency in various applications. In this study, we aimed to synthesize zinc oxide-copper oxide nanocomposites (ZnO-CuO NCs) using a green synthesis approach. The synthesis involved mixing 4 g of Zn(NO3)2·6H2O with different concentrations of mangosteen (G. mangostana) leaf extract (0.02, 0.03, 0.04 and 0.05 g/mL) and 2 or 4 g of Cu(NO3)2·3H2O, followed by calcination at temperatures of 300, 400 and 500 °C. The synthesized ZnO-CuO NCs were characterized using various techniques, including a UV-Visible spectrometer (UV-Vis), photoluminescence (PL) spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy, X-ray powder diffraction (XRD) analysis and Field Emission Scanning Electron Microscope (FE-SEM) with an Energy Dispersive X-ray (EDX) analyzer. Based on the results of this study, the optical, structural and morphological properties of ZnO-CuO NCs were found to be influenced by the concentration of the mangosteen leaf extract, the calcination temperature and the amount of Cu(NO3)2·3H2O used. Among the tested conditions, ZnO-CuO NCs derived from 0.05 g/mL of mangosteen leaf extract, 4 g of Zn(NO3)2·6H2O and 2 g of Cu(NO3)2·3H2O, calcinated at 500 °C exhibited the following characteristics: the lowest energy bandgap (2.57 eV), well-defined Zn-O and Cu-O bands, the smallest particle size of 39.10 nm with highest surface area-to-volume ratio and crystalline size of 18.17 nm. In conclusion, we successfully synthesized ZnO-CuO NCs using a green synthesis approach with mangosteen leaf extract. The properties of the nanocomposites were significantly influenced by the concentration of the plant extract, the calcination temperature and the amount of precursor used. These findings provide valuable insights for researchers seeking innovative methods for the production and utilization of nanocomposite materials.

Phytochemical-Based Nanomaterials against Antibiotic-Resistant Bacteria: An Updated Review

Antibiotic-resistant bacteria (ARB) is a growing global health threat, leading to the search for alternative strategies to combat bacterial infections. Phytochemicals, which are naturally occurring compounds found in plants, have shown potential as antimicrobial agents; however, therapy with these agents has certain limitations. The use of nanotechnology combined with antibacterial phytochemicals could help achieve greater antibacterial capacity against ARB by providing improved mechanical, physicochemical, biopharmaceutical, bioavailability, morphological or release properties. This review aims to provide an updated overview of the current state of research on the use of phytochemical-based nanomaterials for the treatment against ARB, with a special focus on polymeric nanofibers and nanoparticles. The review discusses the various types of phytochemicals that have been incorporated into different nanomaterials, the methods used to synthesize these materials, and the results of studies evaluating their antimicrobial activity. The challenges and limitations of using phytochemical-based nanomaterials, as well as future directions for research in this field, are also considered here. Overall, this review highlights the potential of phytochemical-based nanomaterials as a promising strategy for the treatment against ARB, but also stresses the need for further studies to fully understand their mechanisms of action and optimize their use in clinical settings.

Nanohybrids of oxides nanoparticles-chitosan and their antimicrobial properties

Growing international problem with pathogens acquiring resistance to antibiotics is the reason for the search for bactericidal substances against which microorganisms cannot become resistant. The aim of this study was to synthesize inorganic-organic nanohybrids and obtain materials with antimicrobial effects. Chitosan (CS) was deposited on nanocomposite carriers such as calcium oxide with titanium dioxide (CaO-TiO₂), magnesium oxide with titanium dioxide (MgO-TiO₂) and copper(II) oxide with titanium dioxide (CuO-TiO₂). The efficiency of the process was examined at varying concentrations of chitosan and temperature. The parameters for nanohybrids synthesis were selected based on the highest amount of nano-chitosan deposited on the nanohybrids-for each carrier, the process conditions were as follows: chitosan solution at 5 g l^-1and 20 °C. The materials were obtained using these parameters and were used for microbiological tests againstE. coliATCC 25922,S. aureusATCC 25923 andC. albicansATCC 10231. The growth inhibitory activity of the obtained materials was qualitatively defined. These results suggest that the synthesized nanohybrids and nanocomposites exhibit biostatic action. The material with the broadest effect was the CuO-TiO₂-CS hybrid, which had biostatic properties against all tested strains at a minimal concentration of 1250μg ml^-1. Further research is required to find eco-friendly, non-toxic, and more effective antimicrobials with a broad action to prevent the acquisition of resistance.

An Overview on the Recent Advances in the Treatment of Infected Wounds: Antibacterial Wound Dressings

A wound can be surgical, cuts from an operation or due to accident and trauma. The infected wound, as a result of bacteria growth within the damaged skin, interrupts the natural wound healing process and significantly impacts the quality of life. Wound dressing is an important segment of the skincare industry with its economic burden estimated at $ 20.4 billion (in 2021) in the global market. The results of recent clinical trials suggest that the use of modern dressings can be the easiest, most accessible, and most cost-effective way to treat chronic wounds and, hence, holds significant promise. With the sheer number of dressings in the market, the selection of correct dressing is confusing for clinicians and healthcare workers. The aim of this research was to review widely used types of antibacterial wound dressings, as well as emerging products, for their efficiency and mode of action. In this review, we focus on introducing antibiotics and antibacterial nanoparticles as two important and clinically widely used categories of antibacterial agents. The perspectives and challenges for paving the way for future research in this field are also discussed. This article is protected by copyright. All rights reserved.

Safety issues of nanomaterials for dermal pharmaceutical products

Nanomaterials (NMs) have favorable application in the medicine area, specifically in regard to the carry of pharmaceutical ingredients to provide targeted drug delivery systems. The skin is an excellent route for the delivery of pharmaceutical nano-transporters for skin-related applications. The physicochemical properties of nanomaterials such as size, hydrophobicity, loading capacity, charge and weight are vital for a skin penetrating system. Many nanocarriers such as polymeric nanoparticles, inorganic nanomaterials and, lipid nanostructures have been utilized for dermal delivery of active ingredients and others such as carbon nanotubes and fullerenes require more examination for future application in the skin-related area. Some negative side effects and nano-cytotoxicity of nanomaterials require special attention while investigating different nanomaterials for medicinal applications. Then, in the current review, we had a view on the safety issues of nanomaterials for dermal pharmaceutical products.

Biocidal and biocompatible hybrid nanomaterials from biomolecule chitosan, alginate and ZnO

Biocidal activity and biocompatibility of nanomaterials (NMs) are crucial for healthcare applications. This study aims to develop biocidal hybrid NMs with high inhibition rates to control multidrug-resistant bacterial infection compared to conventional antibiotics. Herein, ZnO, chitosan-ZnO (CZnO) and alginate-ZnO (AZnO) NMs were synthesized via a simple one-pot technique. The one-pot process facilitates the efficiency of a chemical reaction whereby a reactant is subjected to successive chemical reactions in just one step. The resulted NMs bio-physicochemical features were analyzed using various analytical methods. The bactericidal and bacteriostatic mechanism of NMs strongly depends on the production of reactive oxygen species in NMs, due to their size, large surface areas, oxygen vacancies, ion release, and diffusion ability. The antibacterial potential of the NMs was tested against methicillin-resistant Staphylococcus aureus. The inhibition zone disclosed that the AZnO possessed an excellent antibacterial activity compared to ZnO and CZnO. Furthermore, toxicity studies revealed that the AZnO demonstrated low toxicity to the HepG2 cell lines. These results confirmed that the AZnO hybrid nanomaterials are promising futuristic biocidal agents suitable for the clinical and healthcare industries.