The effects of interfacial potential on antimicrobial propensity of ZnO nanoparticle

Multimeric interacting interface of biologically synthesized zinc oxide nanoparticle corona efficiently sequesters α-synuclein against protein fibrillation

Parkinson's disease (PD) is characterized by the loss of dopaminergic neurons along with the accumulation of amyloid plaques with alpha-synuclein (αS) as the major constituent. αS is an intrinsically disordered protein with the potential to undergo a cascade of structural transitions from a soluble disordered conformation to ordered cross-β-sheet-rich insoluble amyloid fibrils. Small molecules like polyphenols and peptides with anti-amyloidogenic potential can mitigate fibrillation in vitro but fail in vivo owing to poor bioavailability. To overcome this problem, a platform that simultaneously enhances the bioavailability of the mitigators and efficiently sequesters αS monomers against amyloidosis is needed. Accordingly, herein, the sequestering potential of surface-moderated zinc oxide nanoparticles was explored; in silico and in vitro studies showed that the moderated nano-interfaces efficiently sequestered αS in amorphous aggregates, which were termed as flocs. Moreover, GC-MS-based analysis of the bio-nano corona highlighted the rationale for efficient sequestering of αS monomers against amyloidosis by the biologically synthesized zinc oxide nanoparticle compared with other nanoparticle surfaces. Thus, this work exemplifies the multimeric interacting interface as a platform to efficiently sequester the αS protein and simultaneously enhance the bioavailability of the phytochemicals.

Differing envelope composition of Gram-negative and Gram-positive bacteria controls the adhesion and bactericidal performance of nanoscale zero-valent iron

Zero-valent-iron (nZVI) is a candidate antimicrobial agent, and previous works revealed its varying inactivation performance on Gram-negative (G-) and Gram-positive (G+) bacteria, but the underlying mechanism remains ambiguous. Herein, we reported the easier inactivation of Escherichia coli (G-, E. coli) than Staphylococcus aureus (G+, S. aureus) by nZVI, and revealed the key role of cell-nZVI adsorption. nZVI adhered more massively on E. coli surface than on S. aureus, and subsequently led to more pronounced membrane damage of E. coli. Investigations of pH, zeta potential, and ionic strength ruled out the essential contribution of nZVI-bacteria electrostatic interaction due to the different surface charges of E. coli and S. aureus. Three-dimensional excitation emission matrix suggested that the extracellular polymeric substances of E. coli suffered more severe damage by nZVI and lead to greater exposure of membrane. Infrared spectra indicated that nZVI strongly bound with the membrane proteins of E. coli and destroyed the membrane components. By contrast, the bonding between nZVI and S. aureus was minimal because of the dominant multi-layered peptidoglycan. The enhanced nZVI adsorption and membrane disruption would result in magnified reactive oxygen species (ROS) generation and oxidative stress of E. coli. Moreover, the catalase activity normalized by ROS concentration of S. aureus was 14.9-fold higher than that of E. coli after nZVI treatment, suggesting the stronger antioxidative capability of S. aureus. Our findings highlight that the different envelope compositions and antioxidant capacities between G- and G+ bacteria were responsible for their varying susceptibility to nZVI.

Comparative evaluation of biologically and chemically synthesized zinc oxide nanoparticles for preventing Candida auris biofilm

Candidozyma auris (formerly Candida auris) is a multidrug-resistant yeast that poses a significant global health threat due to its ability to form biofilms and resist various antifungal treatments. This study evaluates and compares the antifungal efficacy of biologically synthesized zinc oxide nanoparticles (ZnO-NP-B) and chemically synthesized ZnO nanoparticles (ZnO-NP-C1 and ZnO-NP-C2), developed using the dry-wet chemical method and sol-gel method, respectively. ZnO-NP-B was synthesized using Lactobacillus gasseri. The nanoparticles were characterized for size, charge, and morphology using Particle Size Analyzer, photon correlation spectroscopy with a 90 Plus Zetasizer, and scanning electron microscopy (SEM), respectively. The antifungal activity was assessed through minimum inhibitory concentration (MIC50) determination, biofilm inhibition assays by XTT assay, and gene expression analysis. ZnO-NP-C1 exhibited the highest antifungal activity against C. auris planktonic cells, with a MIC50 value of 61.9 ± 3.3 µg/ml, followed by ZnO-NP-C2 (151 ± 7.83 µg/ml), whereas ZnO-NP-B showed limited efficacy (MIC50 = 1 mg/ml). Chemically synthesized ZnO-NPs, particularly ZnO-NP-C2, did not induce overexpression of resistance genes (CDR1, MDR1, ERG2, ERG11, FKS1, CHS1), whereas ZnO-NP-B triggered their upregulation, potentially promoting resistance. ZnO-NP-C1 was the most effective in preventing biofilm formation, reducing C. auris adhesion by 67.9 ± 2.35% at 150 µg/ml, while ZnO-NP-B exhibited negligible inhibition. Gene expression analysis further confirmed that ZnO-NP-C1 significantly downregulated adhesive genes (ALS5, IFF4, CSA1) by up to 0.37 ± 0.006, 0.043 ± 0.002, and 0.06 ± 0.0004, respectively. These findings highlight the potential of ZnO-NP-C1 as a promising antifungal agent for preventing C. auris biofilms, emphasizing the critical role of synthesis methods in optimizing nanoparticle properties for antifungal applications.

Advances of Metal-Based Nanomaterials in the Prevention and Treatment of Oral Infections

The complicated environment of the oral cavity presents significant challenges to traditional antibacterial approaches, which has driven the exploration of novel therapeutic strategies. Metal-based nanomaterials (MNMs), with diverse antibacterial mechanisms (e.g., membrane disruption, oxidative stress) and evolution from empirical to theory-guided design, exhibit immense potential. This review introduces the pioneering Hierarchical Response Strategy Framework, systematically classifying MNM therapeutic systems into three progressive levels: Primary category, comprising MNMs that exert spontaneous antibacterial effects based on inherent physicochemical properties (e.g., ion release); Secondary category, including MNMs with precisely controlled antibacterial actions by microenvironmental or stimulus-responsive mechanisms (e.g., light-induced ROS); and Tertiary category, encompassing MNMs that integrate antibacterial and regenerative functions for multidimensional therapy (e.g., remineralization). Through this framework, the authors elucidate MNMs' transition from single-function to precision-controlled, multifunctional synergy, analyze the impact of metal elements and structural design on efficacy, and summarize their applications in dental caries, endodontic infections, and periodontal disease, etc. This framework offers a novel perspective on existing research and a theoretical foundation for the rational design of next-generation precise, smart, and comprehensive anti-infective materials.

Nanoplastics-mediated physiologic and genomic responses in pathogenic Escherichia coli O157:H7

The widespread occurrence of microplastics (MP) and nanoplastics (NP) in the environment is commonly thought to negatively impact living organisms; however, there remains a considerable lack of understanding regarding the actual risks associated with exposure. Microorganisms, including pathogenic bacteria, frequently interact with MPs/NPs in various ecosystems, triggering physiological responses that warrant a deeper understanding. The present study experimentally demonstrated the impact of surface-functionalized differentially charged polystyrene (PS) NPs on the physiology of human pathogenic Escherichia coli O157:H7 and their influence on biofilm formation. Our results suggest that charged NPs can influence the growth, viability, virulence, physiological stress response, and biofilm lifestyle of the pathogen. Positively-charged NPs were found to have a bacteriostatic effect on planktonic cell growth and affect cellular viability and biofilm initiation compared to negatively charged and uncharged NPs. The transcriptomic and gene expression data indicated significant changes in the global gene expression profile of cells exposed to NPs, including the differential expression of genes encoding several metabolic pathways associated with stress response and virulence. Significant upregulation of Shiga-like toxin (stx1a), quorum sensing, and biofilm initiation genes was observed in NP-exposed biofilm samples. Overall, exposure to NPs did not significantly affect the survival of pathogens but affected their growth and biofilm development pattern, and most importantly, their virulence traits.

Zinc oxide nanoparticle interface moderation enhances the extent of α-synuclein sequestering against the protein amyloidosis

Parkinson's disease is a progressive neurodegenerative disorder that is often associated with plaque deposition, known as Lewy Bodies. Lewy Bodies are predominantly composed of α-synuclein amyloid fibrils. α-Synuclein is a soluble intrinsically disordered protein (IDP) with proposed multiple physiological functions, consisting of aggregation-prone non-amyloid β component (NAC) region in its sequence. Amyloid aggregation of α-synuclein goes through a cytotoxic intermediate(s), leading to structurally mature cross-β sheet-rich fibrils as its end product. Metal nanoparticles with a biocompatible nature have been adopted for different biological applications. Thus, sequestering of α-synuclein monomer onto the metal nanoparticle will potentially impede Parkinson's onset/progression. In this study, interaction of α-synuclein with zinc oxide nanoparticle (ZnONP) having positive surface potential, and moderated ZnONP with negative surface-functional group(s), were explored. The interaction studies indicate that the NAC region interacts with the nanoparticle to sequester the monomeric protein into an amorphous aggregate, thus extending the lag phase of protein fibrillation. Interestingly, α-synuclein complexed with ZnONP exhibits remarkably lowered cytotoxicity against the SH-SY5Y cell in-vitro, compared to the treatment with only ZnONP interfaces or α-synuclein fibrils.

Antimicrobial, antibiofilm, and antiurease activities of green-synthesized Zn, Se, and ZnSe nanoparticles against Streptococcus salivarius and Proteus mirabilis

This study assesses the antimicrobial, antibiofilm, and antiurease properties of selenium (Se), zinc (Zn), and zinc selenide (ZnSe) nanoparticles (NPs) against clinically pathogenic strains of Streptococcus salivarius and Proteus mirabilis. The Se, Zn, and ZnSe NPs, synthesized by Pseudomonas aeruginosa OG1, were characterized using transmission electron microscopy (TEM) revealing average sizes of approximately 30 ± 10 nm, 30 ± 15 nm, and 40 ± 10 nm, respectively. Atomic force microscopy (AFM) was used to examine the morphological and topological characteristics of the NPs. The structural and crystal characteristics were investigated using X-ray diffraction (XRD). Among the evaluated NPs, Zn NPs at a concentration of 200 mg/mL exhibited the most substantial growth inhibition zone against S. salivarius. Conversely, the highest antibiofilm activity was observed against P. mirabilis, notably with 200 µg/mL Zn NPs. In the context of antiurease activity, both 100 μg Zn and ZnSe NPs caused complete urease inhibition (100%) in P. mirabilis within the initial 5 h, with notable inhibition rates of 94% and 80%, respectively, observed against S. salivarius. Significantly, in the current landscape of NP research primarily focused on antimicrobial and antibiofilm properties, our study stands out due to its pioneering exploration of antiurease activities with these NPs. This distinctive emphasis on antiurease effects contributes original and unique value to our study, offering novel insights into the broader spectrum of NP applications, and paving the way for potential therapeutic advancements.

Assessing the Effects of Surface-Stabilized Zero-Valent Iron Nanoparticles on Diverse Bacteria Species Using Complementary Statistical Models

Nanoparticles are proposed as alternatives to traditional antimicrobial agents. By manipulating a nanoparticle's core and surface coating, antimicrobial effects against various microbial populations can be customized, known as the "designer effect". However, the antimicrobial properties of nanoparticle core-coating combinations are understudied; little research exists on their effects on diverse bacteria. The antimicrobial effects of surface-stabilized zero-valent iron nanoparticles (FeNPs) are particularly interesting due to their stability in water and ferromagnetic properties. This study explores the impact of FeNPs coated with three surface coatings on six diverse bacterial species. The FeNPs were synthesized and capped with L-ascorbic acid (AA), cetyltrimethylammonium bromide (CTAB), or polyvinylpyrrolidone (PVP) using a bottom-up approach. Zone of inhibition (ZOI) values, assessed through the disc diffusion assay, indicated that AA-FeNPs and CTAB-FeNPs displayed the most potent antibacterial activity. Bacteria inhibition results ranked from most sensitive to least sensitive are the following: Bacillus nealsonii > Escherichia coli > Staphylococcus aureus > Delftia acidovorans > Chryseobacterium sp. > Sphingobacterium multivorum. Comparisons using ordinal regression and generalized linear mixed models revealed significant differences in bacterial responses to the different coatings and nanoparticle concentrations. The statistical model results are in agreement, thus increasing confidence in these conclusions. This study supports the feasibility of the "designer nanoparticle" concept and offers a framework for future research.

"Harnessing green synthesized zinc oxide nanoparticles for dual action in wound management: Antibiotic delivery and healing Promotion"

Wound infections are characterized by the invasion of microorganisms into bodily tissues, leading to inflammation and potentially affecting any type of wound, including surgical incisions and chronic ulcers. If left untreated, they can delay recovery and cause tissue damage. Healthcare providers face challenges in treating these infections, which necessitate efficient treatment plans involving microbiological testing and clinical evaluation. The effectiveness of conventional treatments like antibiotics is limited by resistance. Various forms of nanotechnology have been developed, each exhibiting unique properties that address particular issues with conventional therapies. Among all the Nanocarriers, zinc oxide nanoparticles (ZnO NPs), offer promising treatments for persistent wound infections. ZnO NPs possess strong antibacterial, antioxidant, anti-inflammatory, and anti-diabetic properties, making them suitable for wound care applications. These nanoparticles can be produced economically and environmentally using green synthesis techniques that minimize toxicity and are biocompatible. While chemical and physical techniques offer precise control over nanoparticle characteristics, they often involve hazardous substances and energy-intensive procedures. The antibacterial qualities, low toxicity, and biological compatibility of green-synthesized ZnO NPs make them a promising treatment for wound infections. Their use in scaffolds, drug delivery systems, and wound dressings provides a viable approach to combat antibiotic resistance and enhance wound treatment outcomes. Furthermore research is necessary to fully realize the benefits of ZnO NPs in clinical practice.

Growing Hybrid Cuticles: Metallochitins as an Emerging Family of Bioactive Mimics of Chitin

Inspired by the properties of natural chitin, the present work provides the first solid foundation for growing conformal ultrathin antibacterial films of organic chitin through a solvent-free molecular layer deposition (MLD) process. This work establishes the initial groundwork for growing biomimetic hybrid cuticles by combining sugar-type molecules with vapor-phase metal-organic precursors, which we term metallochitins or, more generally, metallosaccharides. The MLD process, featuring mild temperatures and solvent-free conditions, provides exceptional conformality and thickness precision, ensuring highly conformal coatings on diverse high aspect ratio substrates. In vitro testing confirmed that the MLD-grown metallochitins not only promote the growth of various cell lines but also prevent adhesion of both Gram-negative and Gram-positive bacteria. The choice of the metal in the hybrid enables selective antimicrobial activity against Gram-negative bacteria or comprehensive antibacterial effects, which can be controlled as desired.

A promising eco-friendly and cost-effective photocatalytic rolled graphene oxide/poly(m-methylaniline) core-shell nanocomposite for antimicrobial action

A new and innovative rolled graphene oxide (roll-GO)/poly-m-methylaniline (PmMA) core-shell nanocomposite has been successfully synthesized using an in situ polymerization technique. This eco-friendly and cost-effective material shows great promise due to its antimicrobial properties. The characterization of the nanocomposite involved X-ray diffraction and Fourier transform infrared spectroscopy to analyze its structure and functional groups, whereas scanning electron microscopy and transmission electron microscopy (TEM) were utilized to examine its morphology. TEM analysis revealed the formation of roll-GO, forming multi-walled tubes with inner and outer diameters of 50 and 70 nm, respectively. Optical analysis demonstrated an enhanced bandgap in the nanocomposite, with bandgap values of 2.38 eV for PmMA, 2.67 eV for roll-GO, and 1.65 eV for roll-GO/PmMA. The antibacterial efficacy of the nanocomposite was tested against Gram-positive bacteria, including Bacillus subtilis and Staphylococcus aureus, as well as Gram-negative bacteria such as Escherichia coli and Salmonella sp. The well diffusion method was used to determine the inhibition zones, revealing that the nanocomposite demonstrated broad-spectrum antibacterial activity against all the pathogens tested. The largest inhibition zones were observed for B. subtilis, followed by S. aureus, E. coli, and Salmonella sp. Notably, the inhibition zones increased when the samples were exposed to light compared to dark conditions, with increases of 33 and 18 mm noted for B. subtilis. This enhanced activity under light exposure is attributed to the photocatalytic properties of the nanocomposite. The antibacterial mechanism is based on both adsorption and degradation processes. Moreover, antibacterial activity was found to increase with increasing concentrations of nanoparticles, ranging from 100 to 500 ppm. This suggests that the nanocomposite has potential as an alternative to antibiotics, especially considering the growing issue of bacterial resistance. The promising results obtained from the inhibition zones make these nanocomposites suitable for various applications. Currently, the research team is working on the development of a prototype utilizing these antimicrobial particles within commercial bottles for sterilization purposes in factories and companies.

S100A12 inhibits Streptococcus pneumoniae and aids in wound healing of corneal epithelial cells both in vitro and in vivo

Streptococcus pneumoniae, a leading cause of corneal infections worldwide, are extremely aggressive despite antibiotic sensitivity and exhibit increased resistance towards antibiotics. Antimicrobial peptides are often considered as potent alternatives against antibiotic resistance and here we have investigated the possible roles of S100A12, a host defense peptide, in wound healing and S. pneumoniae infection. S100A12 significantly inhibited growth of S. pneumoniae by disruption of membrane integrity along with increased generation of reactive oxygen species. Additionally, S100A12 accelerated cell migration and wound closure in human corneal epithelial cells and in a murine corneal wound model by activation of EGFR and MAPK signaling pathways.

Mentha spicata Mediated Formulation of Iron Oxide Nanoparticles Exhibit Superior Antimicrobial, Antioxidant, and Photodegradation Propensity Compared to Chemically Formulated Counterparts

INTRODUCTION

Iron oxide nanoparticles demonstrate tremendous potential in preserving the ecological balance of the environment since they act as antimicrobial agents and efficient photocatalysts. However, environmental sustainability has challenged the synthesis protocols of nanomaterials.

METHODS

This study compares the green synthesis method with the scalable chemical synthesis method. In this work, Iron oxide nanoparticles were fabricated via the green chemistry technique utilizing the leaf extract of Mentha spicata (M-IONP) and also via the chemical co-precipitation method (C-IONP). The synthesized IONPs were analyzed by different characterization methods such as XRD, FTIR, SEM analysis, ZETA potential measurements, and DLS spectroscopy analysis.

RESULTS

The biosynthesized and chemically synthesized IONPs were analyzed for their mechanistic action against different applications like antimicrobial, antioxidant, and degradation of harmful dyes. Interestingly, the biosynthesized IONPs (M-IONP) exhibited more effective antimicrobial efficacy towards Gram-positive and Gram-negative organisms than chemically synthesized IONPs.

CONCLUSION

The green synthesized M-IONP also showed significant antioxidant propensity similar to that of the standards taken. Additionally, green-synthesized M-IONP exhibited enhanced degradation efficacies against Methylene blue, chromium, and sulphamethoxazole in comparison to chemically synthesized IONP.

Anisotropic patterns of nanospikes induces anti-biofouling and mechano-bactericidal effects of titanium nanosurfaces with electrical cue

Anti-microbial nanopatterns have attracted considerable attention; however, its principle is not yet fully understood, particularly for inorganic nanopatterns. Titanium nanosurfaces with dense and anisotropically patterned nanospikes regulate biological functions with multiple physical stimulations, which may be because of the nanopattern-induced alternation of surface physical properties. This study aimed to determine the antimicrobial capability of titanium nanosurfaces and their mechanisms. Two types of alkali-etched titanium nanosurfaces with isotropically or anisotropically patterned nanospikes had markedly denser surface protrusions, greater superhydrophilicity, and greater negative charge than machined or micro-roughened titanium surfaces. The crystallographic properties of anisotropic titanium nanosurfaces were similar to those of isotropic nanosurfaces, but markedly higher in electric reactivity at nanoscale. The maximum value of the contact potential difference on titanium surfaces was significantly correlated with the product of the density and anisotropy in the distribution pattern of surface protrusions. Isotropic titanium nanosurfaces did not inhibit the attachment of gram-positive cocci, such as Staphylococcus aureus, whereas anisotropic titanium nanosurfaces substantially inhibited gram-positive cocci attachment. Most gram-negative bacilli, Escherichia coli, died via swelling of the cell body on anisotropic titanium nanosurfaces within 6 h of incubation, in contrast to other titanium surfaces where most of the cells did not lose viability or undergo morphological changes. The extent of cell swelling was positively correlated with the electric reactivity of the titanium surfaces. Titanium nanosurfaces with anisotropically patterned dense nanospikes exerted anti-biofouling or mechano-bactericidal effects on gram-positive or negative bacteria with electrical cue induced by the anisotropy of the nanospike patterns.

Zinc oxide nanomaterials: Safeguarding food quality and sustainability

In this era, where food safety and sustainability are paramount concerns, the utilization of zinc oxide (ZnO) nanoparticles (NPs) is a promising solution to enhance the safety, quality, and sustainability of food products. ZnO NPs in the food industry have evolved significantly over time, reflecting advancements in synthesizing methods, antimicrobial activities, and risk assessment considerations for human health and the environment. This comprehensive review delves into the historical trajectory, current applications, and prospects of ZnO NPs in food-related contexts. Synthesizing methods, ranging from solvothermal and solgel techniques to laser ablation and microfluidic reactors, have facilitated the production of ZnO NPs with tailored properties suited for diverse food applications. The remarkable antimicrobial activity of ZnO NPs against a wide spectrum of pathogens has garnered attention for their potential to enhance food safety and extend shelf-life. Furthermore, comprehensive risk assessment methodologies have been employed to evaluate the potential impacts of ZnO NPs on human health and the environment, regarding toxicity, migration, and ecological implications. By navigating the intricate interplay between synthesis methods, antimicrobial efficacy, inhibitory mechanisms, and risk assessment protocols, by elucidating the multifaceted role of ZnO NPs in shaping the past, present, and future of the food industry, this review offers valuable insights and promising avenues for researchers, policymakers, and industry stakeholders to enhance food safety, quality, and sustainability.

Synthesis and antibacterial activity of silver doped zinc sulfide/chitosan bionanocomposites: A new frontier in biomedical applications

Numerous microbial species have caused infectious diseases worldwide, which have become a social burden and a menace to the community. So, there is a need to develop antimicrobial materials and specialized materials for biomedical applications. In the present investigation, we report the simple synthesis, the physicochemical, and antibacterial activity of Silver doped zinc sulfide (ZnS: Ag) capped with Chitosan (CS) to produce ZnS: Ag/CS bionanocomposites (BNCs). The prepared BNCs was evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) mapping, and UV-Vis spectroscopy. According to the XRD results, ZnS: Ag/CS particles with semicrystalline chitosan/hexagonal ZnS phase structures and an average crystallite size in the range of 30-40 nm was formed. According to FESEM images, a spherical/hexagonal shape of ZnS: Ag particles embedded in the polymeric chitosan matrix. The colony counting method was employed to investigate the antibacterial activity on Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The results revealed that ZnS: Ag particles and ZnS: Ag/CS BNCs have stronger antibacterial activities than pure CS and ZnS. The reduction percentage of ZnS: Ag/CS BNCs against S. aureus and E. coli after 6 h of treatment was >99.9 % and 70 % respectively. These findings suggest that ZnS: Ag/CS BCs not only offer superior antimicrobial properties compared to individual ZnS and CS but also have great potential for advancing biomedical applications due to their enhanced antibacterial performance. The simplicity of the synthesis method and the use of non-toxic materials like chitosan make this a sustainable approach for developing antimicrobial agents, which is a key advantage of this study.

Direct, Broad-Spectrum Antimicrobial Activity of Ag+-Doped Hydroxyapatite against Fastidious Anaerobic Periodontal and Aerobic Dental Bacteria

Periodontitis and caries, while seemingly innocuous medical conditions, actually pose significant challenges because of their potential etiology with far more serious conditions. Efficacious treatment is hindered by bacterial antibiotic resistance. Standard AgNPs are ineffective against periodontal anaerobic bacteria, because they require oxidative dissolution to release Ag+ ions, which are the actual antimicrobial agents, but oxidation is not possible under anaerobic conditions. Prior studies on Ag-based periodontal antimicrobial materials either did not confirm a silver oxidation state or did not use strictly anaerobic growth media or both, causing spurious antimicrobial efficacy estimates. Here, we prove that silver ion-doped hydroxyapatite nanoparticles (AgHAp NPs) synthesized at various pHs contain an Ag+ oxidation state and directly release Ag+ even in a strictly anerobic medium. Thus, these AgHAp NPs exhibit direct antimicrobial activity against the fastidious anaerobic Gram-negative periodontal bacterium Fusobacterium nucleatum (F. nucleatum) and against caries-causing aerobic, Gram-positive bacterium Streptococcus mutans (S. mutans). The synthesis pH (6-11) correlates inversely with the Ag+ content (4.5-0.45 wt %) of AgHAp NPs and, hence, with antimicrobial efficacy, thus providing tunable efficacy for the target application. AgHAp NPs had greater antimicrobial efficacy than Ag0-containing AgNPs and were less cytotoxic to the mouse fibroblast L929 cell line. Thus, AgHAp NPs (especially AgHAp7) are superior to AgNPs as effective, broad-spectrum, biocompatible antimicrobials against both anaerobic periodontal and aerobic dental bacteria. AgHAp NP synthesis is also inexpensive and scalable, which are significant factors for treating large global populations of indigent people affected by periodontitis and dental caries.

Nanoparticles of Cs0.33WO3 as Antibiofilm Agents and Photothermal Treatment to Inhibit Biofilm Formation

Metal oxide nanoparticles with photothermal properties have attracted considerable research attention for their use in biomedical applications. Cesium tungsten oxide (Cs0.33WO3) nanoparticles (NPs) exhibit strong absorption in the NIR region due to localized surface plasmon resonance, through which they convert light to heat; hence, they can be applied to photothermal treatment for bacteria and biofilm ablation. Herein, Cs0.33WO3 NPs were synthesized through solid-phase synthesis, and their physical properties were characterized through Zetasizer, energy dispersive X-ray spectroscopy, Fourier transform infrared spectrometer, and scanning and transmission electron microscopy (SEM and TEM, respectively). Burkholderia cenocepacia isolates were cultured in tryptic soy broth supplemented with glucose, and the biofilm inhibition and antibiofilm effects of the NPs were determined using a crystal violet assay and the Cell Counting Kit-8 (CCK-8) assay. The biofilm morphology and viability of NP-treated cultures after NIR irradiation were evaluated through SEM and confocal microscopy, respectively. The cytotoxicity of NPs to human macrophages was also assessed using the CCK-8 assay. The NPs effectively inhibited biofilm formation, with a formation rate of <10% and a viability rate of <50% at the concentration of ≥200 μg/mL. The confocal analysis revealed that NIR irradiation markedly enhanced biofilm cytotoxicity after treatment with the NPs. The assay of cytotoxicity to human macrophages demonstrated the biocompatibility of the NPs and NIR irradiation. In sum, the Cs0.33WO3 NPs displayed effective biofilm inhibition and antibiofilm activity at 200 μg/mL treatment concentration; they exhibited an enhancement effect under the NIR irradiation, suggesting Cs0.33WO3 NPs are a potential candidate agent for NIR-irradiated photothermal treatment in bacterial biofilm inhibition and antibiofilm.

Cutting-edge developments in zinc oxide nanoparticles: synthesis and applications for enhanced antimicrobial and UV protection in healthcare solutions

This paper presents a comprehensive review of recent advancements in utilizing zinc oxide nanoparticles (ZnO NPs) to enhance antimicrobial and UV protective properties in healthcare solutions. It delves into the synthesis techniques of ZnO NPs and elucidates their antimicrobial efficacy, exploring the underlying mechanisms governing their action against a spectrum of pathogens. Factors impacting the antimicrobial performance of ZnO NPs, including size, surface characteristics, and environmental variables, are extensively analyzed. Moreover, recent studies showcasing the effectiveness of ZnO NPs against diverse pathogens are critically examined, underscoring their potential utility in combatting microbial infections. The study further investigates the UV protective capabilities of ZnO NPs, elucidating the mechanisms by which they offer UV protection and reviewing recent innovations in leveraging them for UV-blocking applications in healthcare. It also dissects the factors influencing the UV shielding performance of ZnO NPs, such as particle size, dispersion quality, and surface coatings. Additionally, the paper addresses challenges associated with integrating ZnO NPs into healthcare products and presents future perspectives for overcoming these hurdles. It emphasizes the imperative for continued research efforts and collaborative initiatives to fully harness the potential of ZnO NPs in developing advanced healthcare solutions with augmented antimicrobial and UV protective attributes. By advancing our understanding and leveraging innovative approaches, ZnO NPs hold promise for addressing pressing healthcare needs and enhancing patient care outcomes.

Bacteria Contaminants Detected by Organic Inverter-Based Biosensors

The importance of bacteria detection lies in its role in enabling early intervention, disease prevention, environmental protection, and effective treatment strategies. Advancements in technology continually enhance the speed, accuracy, and sensitivity of detection methods, aiding in addressing these critical issues. This study first reports the fabrication of an inverter constructed using crosslinked-poly(4-vinylphenol) (C-PVP) as the dielectric layer and an organic complementary metal-oxide semiconductor (O-CMOS) based on pentacene and N,N'-ditridecylperylene-3,4,9,10-tetracarboxylic diimide (PTCDI-C13) as a diagnostic biosensor to rapidly detect bacterial concentration. Bacteria including Escherichia coli O157, Staphylococcus aureus ATCC25922, and Enterococcus faecalis SH-1051210 were analysed on the inverters at an ultra-low operating voltage of 2 V. The high density of negative charge on bacteria surfaces strongly modulates the accumulated negative carriers within the inverter channel, resulting in a shift of the switching voltage. The inverter-based bacteria sensor exhibits a linear-like response to bacteria concentrations ranging from 102 to 108 CFU/mL, with a sensitivity above 60%. Compared to other bacterial detectors, the advantage of using an inverter lies in its ability to directly read the switching voltage without requiring an external computing device. This facilitates rapid and accurate bacterial concentration measurement, offering significant ease of use and potential for mass production.

Polydopamine-Coated Copper-Doped Co3O4 Nanosheets Rich in Oxygen Vacancy on Titanium and Multimodal Synergistic Antibacterial Study

Medical titanium-based (Ti-based) implants in the human body are prone to infection by pathogenic bacteria, leading to implantation failure. Constructing antibacterial nanocoatings on Ti-based implants is one of the most effective strategies to solve bacterial contamination. However, single antibacterial function was not sufficient to efficiently kill bacteria, and it is necessary to develop multifunctional antibacterial methods. This study modifies medical Ti foils with Cu-doped Co3O4 rich in oxygen vacancies, and improves their biocompatibility by polydopamine (PDA/Cu-Ov-Co3O4). Under near-infrared (NIR) irradiation, nanocoatings can generate •OH and 1O2 due to Cu+ Fenton-like activity and a photodynamic effect of Cu-Ov-Co3O4, and the total reactive oxygen species (ROS) content inside bacteria significantly increases, causing oxidative stress of bacteria. Further experiments prove that the photothermal process enhances the bacterial membrane permeability, allowing the invasion of ROS and metal ions, as well as the protein leakage. Moreover, PDA/Cu-Ov-Co3O4 can downregulate ATP levels and further reduce bacterial metabolic activity after irradiation. This coating exhibits sterilization ability against both Escherichia coli and Staphylococcus aureus with an antibacterial rate of ca. 100%, significantly higher than that of bare medical Ti foils (ca. 0%). Therefore, multifunctional synergistic antibacterial nanocoating will be a promising strategy for preventing bacterial contamination on medical Ti-based implants.

Zinc oxide nanoparticles mediate bacterial toxicity in Mueller-Hinton Broth via Zn2. Front Microbiol 2024;15:1394078. [PMID: 38711974 PMCID: PMC11070567 DOI: 10.3389/fmicb.2024.1394078] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

As antibiotic resistance increases and antibiotic development dwindles, new antimicrobial agents are needed. Recent advances in nanoscale engineering have increased interest in metal oxide nanoparticles, particularly zinc oxide nanoparticles, as antimicrobial agents. Zinc oxide nanoparticles are promising due to their broad-spectrum antibacterial activity and low production cost. Despite many studies demonstrating the effectiveness of zinc oxide nanoparticles, the antibacterial mechanism is still unknown. Previous work has implicated the role of reactive oxygen species such as hydrogen peroxide, physical damage of the cell envelope, and/or release of toxic Zn2+ ions as possible mechanisms of action. To evaluate the role of these proposed methods, we assessed the susceptibility of S. aureus mutant strains, ΔkatA and ΔmprF, to zinc oxide nanoparticles of approximately 50 nm in size. These assays demonstrated that hydrogen peroxide and electrostatic interactions are not crucial for mediating zinc oxide nanoparticle toxicity. Instead, we found that Zn2+ accumulates in Mueller-Hinton Broth over time and that removal of Zn2+ through chelation reverses this toxicity. Furthermore, we found that the physical separation of zinc oxide nanoparticles and bacterial cells using a semi-permeable membrane still allows for growth inhibition. We concluded that soluble Zn2+ is the primary mechanism by which zinc oxide nanoparticles mediate toxicity in Mueller-Hinton Broth. Future work investigating how factors such as particle morphology (e.g., size, polarity, surface defects) and media contribute to Zn2+ dissolution could allow for the synthesis of zinc oxide nanoparticles that possess chemical and morphological properties best suited for antibacterial efficacy.

Metallic nanoparticle actions on the outer layer structure and properties of Bacillus cereus and Staphylococcus epidermidis

Although the antimicrobial activity of nanoparticles (NPs) penetrating inside the cell is widely recognised, the toxicity of large NPs (>10 nm) that cannot be translocated across bacterial membranes remains unclear. Therefore, this study was performed to elucidate the direct effects of Ag-NPs, Cu-NPs, ZnO-NPs and TiO2-NPs on relative membrane potential, permeability, hydrophobicity, structural changes within chemical compounds at the molecular level and the distribution of NPs on the surfaces of the bacteria Bacillus cereus and Staphylococcus epidermidis. Overall analysis of the results indicated the different impacts of individual NPs on the measured parameters in both strains depending on their type and concentration. B. cereus proved to be more resistant to the action of NPs than S. epidermidis. Generally, Cu-NPs showed the most substantial toxic effect on both strains; however, Ag-NPs exhibited negligible toxicity. All NPs had a strong affinity for cell surfaces and showed strain-dependent characteristic dispersion. ATR-FTIR analysis explained the distinctive interactions of NPs with bacterial functional groups, leading to macromolecular structural modifications. The results presented provide new and solid evidence for the current understanding of the interactions of metallic NPs with bacterial membranes.

Investigating the effect of acidic and basic precipitation on the antibacterial activity of ZnO nanoparticles against Gram-negative and Gram-positive bacteria

In the present work, acidic (direct) and basic precipitation (indirect) methods were used to demonstrate the influence of the mode of precipitation on the structural properties of ZnO nanoparticles (NPs). Four samples of ZnO nanoparticles were prepared, two samples via each mode of precipitation. DZOa and IZOa were the aged samples prepared via acidic and basic precipitation methods, and DZOwa and IZOwa were processed without aging. Both precipitation processes were carried out without using any surfactant reagents. Zinc hydroxide precipitate, which was formed during the basic precipitation method, could be critical in deciding the properties of ZnO NPs, unlike zinc hydroxide formed during acidic precipitation. Aging of zinc hydroxide, synthesised by basic precipitation method for 48 hours was found to be an added advantage in controlling the properties of ZnO NPs. The influence of the mode of precipitation on the structural properties and antibacterial activity of ZnO NPs against Gram-positive and Gram-negative bacterial strains was tested. The antibacterial activity of all four ZnO NPs was analysed via zone of inhibition measurements at a concentration dose of 200 μg ml-1. IZOa nanoparticles prepared using the basic precipitation method showed a higher antibacterial activity against three Gram-negative and one Gram-positive strains, namely, Klebsiella pneumoniae, Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli. DZOa nanoparticles synthesized through acidic precipitation showed relatively high antibacterial activity against Salmonella typhimurium, a Gram-negative strain. ZnO NPs prepared without aging, IZOwa and DZOwa, showed a higher antibacterial activity against E. coli and Bacillus sp. strains, respectively. All ZnO NPs were characterized via UV-visible, FTIR, XRD, and HRSEM techniques.

Enhanced antimicrobial efficacy of biogenic ZnO nanoparticles through UV-B activation: A novel approach for textile garment

Zinc oxide nanoparticles (ZnO NP) are characterized by novel properties which have been attracting the attention of different lines of research due to their wide applicability. Obtaining this nanomaterial is strongly linked to biogenic synthesis methods, which have also been developed in this research, using Coriandrum sativum extract as a reducing agent. ZnO NPs have been properly characterized by techniques to evaluate their morphology by transmission electron microscopy (TEM) and elemental analysis by EDX. The evaluation of the antimicrobial and antifungal effects is linked to the use of a system provided by "locker sanitizer" equipment, which has been designed and built as part of this research, and is intended to treat textile garments by nebulizing the ZnO NP colloid (99.08 μg/mL) + UV-B, water + UV-B, and UV-B only, and also to evaluate the influence of the treatment time for 1, 2 and 3 min. In this sense, it is known that the nanomaterial used shows a better response to UV light because more hydroxyl radicals are produced, leading to a higher reaction rate, which results in greater efficiency in inhibitory processes. The results show that the use of the locker sanitizer is more efficient when using ZnO NP + UV-B light since it achieved 100 % growth inhibition against E. coli, C. albicans, and A. brasiliensis, and >99 % against S. aureus, after 3 min of treatment.

A membrane targeted multifunctional cationic nanoparticle conjugated fusogenic nanoemulsion (CFusoN): induced membrane depolarization and lipid solubilization to accelerate the killing of Staphylococcus aureus

Bacterial infections caused by Staphylococcus aureus are one of the growing concerns for human health care management globally. Antibiotic-associated adverse effects and the emergence of bacterial resistant strains necessitate the development of an alternative yet effective approach. Nanoemulsion-based therapy has emerged as a potential therapeutic strategy to combat bacterial infestation. Herein, we designed a cationic metal nanoparticle-conjugated fusogenic nanoemulsion (CFusoN) as a lipid solubilizing nanovesicle for the effective treatment of S. aureus infection with a killing efficiency of 99.999%. The cationic nanoparticle-conjugated nanoemulsion (viz. NECNP) (24.4 ± 2.9 mV) electrostatically bound with the negatively charged bacterial cell membrane (-10.2 ± 3.7 mV) causing alteration of the bacterial surface charge. The fluorometric and flow cytometry studies confirmed the bacterial membrane depolarization and altered cell membrane permeability leading to cell death. The atomic force microscopic studies further demonstrated the damage of the cellular ultrastructure, while the transmission electron microscopic image and membrane lipid solubilization analysis depicted the solubilization of the bacterial membrane lipid bilayer along with the leakage of the intracellular contents. The cell membrane fatty acid analysis revealed that the methyl esters of palmitic acid, stearic acid and octadecadienoic acid isomers were solubilized after the treatment of S. aureus with CFusoN. The bactericidal killing efficiency of CFusoN is proposed to occur through the synergistic efficacy of the targeted attachment of CNP to the bacterial cells along with the lipid solubilization property of NE. Interestingly, NECNP didn't elicit any in vitro hemolytic activity or cytotoxicity against red blood cells (RBCs) and L929 fibroblast cells, respectively, at its bactericidal concentration. Furthermore, a porcine skin wound infection model exhibited the enhanced wound cleansing potency of CFusoN in comparison to the commercially available wound cleansers. The obtained antibacterial activity, biocompatibility and skin wound disinfection efficacy of the NECNP demonstrated the formulation of a cell targeted CFusoN as a promising translatable strategy to combat bacterial infection.

Size-Controlled Synthesis of Gold Nanoparticles Tethering Antimicrobial Peptides with Potent Broad-Spectrum Antimicrobial and Antibiofilm Activities

New antimicrobials are urgently needed to combat the rising global health concern of antibiotic resistance. Antimicrobial peptides (AMPs) are one of the leading candidates as new antimicrobials since they target bacterial membranes and are therefore less prone to bacterial resistance. However, poor enzymatic stability, high production costs, and toxicity are drawbacks that limit their clinical use. Conjugation of AMPs to gold nanoparticles (NPs) may help to improve enzymatic stability and, thus, their overall antimicrobial efficiency. We did a one-pot synthesis of size-controlled (10 nm) gold NPs selectively conjugated to lipopeptides and determined their antibacterial activity. The conjugates exhibited potent (0.13-1.25 μM) antimicrobial activity against clinical isolates, including Gram-positive methicillin-resistant Staphylococcus aureus (S. aureus) ATCC33593, Gram-negative Escherichia coli (E. coli) CTX-M-14, multidrug-resistant Pseudomonas aeruginosa LESB58 and Acinetobacter baumannii ATCC19606, and showed promising activity (90% inhibition of initial biofilms and 80% reduction of preformed biofilms) against S. aureus and E. coli DH5α biofilms at low micromolar concentrations. The conjugates were stable in rat serum and not toxic to representative mammalian cell lines in vitro (≤64 μM) and in vivo (≤100 μM).

Gram-Positive Bacterial Membrane-Based Biosensor for Multimodal Investigation of Membrane-Antibiotic Interactions

As membrane-mediated antibiotic resistance continues to evolve in Gram-positive bacteria, the development of new approaches to elucidate the membrane properties involved in antibiotic resistance has become critical. Membrane vesicles (MVs) secreted by the cytoplasmic membrane of Gram-positive bacteria contain native components, preserving lipid and protein diversity, nucleic acids, and sometimes virulence factors. Thus, MV-derived membrane platforms present a great model for Gram-positive bacterial membranes. In this work, we report the development of a planar bacterial cytoplasmic membrane-based biosensor using MVs isolated from the Bacillus subtilis WT strain that can be coated on multiple surface types such as glass, quartz crystals, and polymeric electrodes, fostering the multimodal assessment of drug-membrane interactions. Retention of native membrane components such as lipoteichoic acids, lipids, and proteins is verified. This biosensor replicates known interaction patterns of the antimicrobial compound, daptomycin, with the Gram-positive bacterial membrane, establishing the applicability of this platform for carrying out biophysical characterization of the interactions of membrane-acting antibiotic compounds with the bacterial cytoplasmic membrane. We report changes in membrane viscoelasticity and permeability that correspond to partial membrane disruption when calcium ions are present with daptomycin but not when these ions are chelated. This biomembrane biosensing platform enables an assessment of membrane biophysical characteristics during exposure to antibiotic drug candidates to aid in identifying compounds that target membrane disruption as a mechanism of action.

Bioactive ZnO Nanoparticles: Biosynthesis, Characterization and Potential Antimicrobial Applications

In recent years, biosynthesized zinc oxide nanoparticles (ZnONPs) have gained tremendous attention because of their safe and non-toxic nature and distinctive biomedical applications. A diverse range of microbes (bacteria, fungi and yeast) and various parts (leaf, root, fruit, flower, peel, stem, etc.) of plants have been exploited for the facile, rapid, cost-effective and non-toxic synthesis of ZnONPs. Plant extracts, microbial biomass or culture supernatant contain various biomolecules including enzymes, amino acids, proteins, vitamins, alkaloids, flavonoids, etc., which serve as reducing, capping and stabilizing agents during the biosynthesis of ZnONPs. The biosynthesized ZnONPs are generally characterized using UV-VIS spectroscopy, TEM, SEM, EDX, XRD, FTIR, etc. Antibiotic resistance is a serious problem for global public health. Due to mutation, shifting environmental circumstances and excessive drug use, the number of multidrug-resistant pathogenic microbes is continuously rising. To solve this issue, novel, safe and effective antimicrobial agents are needed urgently. Biosynthesized ZnONPs could be novel and effective antimicrobial agents because of their safe and non-toxic nature and powerful antimicrobial characteristics. It is proven that biosynthesized ZnONPs have strong antimicrobial activity against various pathogenic microorganisms including multidrug-resistant bacteria. The possible antimicrobial mechanisms of ZnONPs are the generation of reactive oxygen species, physical interactions, disruption of the cell walls and cell membranes, damage to DNA, enzyme inactivation, protein denaturation, ribosomal destabilization and mitochondrial dysfunction. In this review, the biosynthesis of ZnONPs using microbes and plants and their characterization have been reviewed comprehensively. Also, the antimicrobial applications and mechanisms of biosynthesized ZnONPs against various pathogenic microorganisms have been highlighted.

Injectable Self-Harden Antibiofilm Bioceramic Cement for Minimally Invasive Surgery

There is an urgent demand for antibacterial bone grafts in clinics. Worryingly, the misuse and overuse of antibiotics accelerate the emergence of drug-resistant bacteria. Therefore, this study prepared a novel injectable bioceramic cement without antibiotics (FS-BCS), which showed good antibacterial properties by loading iron and strontium onto a matrix composed of brushite and calcium sulfate. The setting time, injectability, microstructure, antibacterial properties, anti-biofilm properties, and cytocompatibility of the novel bioceramic cement were evaluated thoroughly. The results showed that the material was highly injectable and antiwashout. The antibacterial tests revealed that FS-BCS inhibited the growth of 99.9% E. coli and S. aureus separately in the broth due to the synergistic effect of strontium and iron. Simultaneously, crystal violet and fluorescent staining tests revealed that the material could significantly inhibit the formation of E. coli and S. aureus biofilms. In addition, the co-incorporation of iron and strontium promoted the proliferation and migration of osteoblasts. Therefore, FS-BCS has good application potential in antibiotic-free anti-infection bone grafting using minimally invasive surgery.

Improving the biocompatibility and antibacterial efficacy of silver nanoparticles functionalized with (LLRR)3 antimicrobial peptide

The selection of effective antibiotics is becoming increasingly limited due to the emergence of bacterial resistance. Designing and developing nanoscale antibacterials is a strategy for effectively addressing the antibiotic crisis. In this work, AgNPs@AMP nanoparticles were synthesized to take advantage of the synergistic antibacterial activity of the (LLRR)3 antimicrobial peptide (AMP) and silver nanoparticles (AgNPs). Based on morphological structure characterization and biocompatibility analysis, the inhibitory properties of AgNPs@AMP on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were evaluated. The results demonstrated that AMP and AgNPs were physically bound to form AgNPs@AMP nanoparticles, which had better solution stability, improved nanomaterial properties, and overcame the hemolytic activity of AMP and the cytotoxicity of AgNPs. The inhibitory activity of AgNPs@AMP against E. coli and S. aureus was significantly higher than that of AMP and AgNPs. It was capable of disrupting the morphology and internal structure of cells, damaging the cell membrane, and inhibiting the activity of enzymes related to the material-energy metabolism of the tricarboxylic acid cycle. Compared to AMP and AgNPs, AgNPs@AMP were found to effectively inhibit the infection of mouse wounds and promote their healing. Therefore, AMP-modified AgNPs can enhance their biocompatibility and antibacterial activity, and they can be further developed as a potential antimicrobial agent.

Free zinc ions, as a major factor of ZnONP toxicity, disrupts free radical homeostasis in CCRF-CEM cells

Nanotechnology has become a ubiquitous part of our everyday life. Besides the already-known nanoparticles (NPs), plenty of new nanomaterials are being synthesized every day. Here, we explain the mechanism of the zinc oxide nanoparticles (ZnONPs) cytotoxicity in a cellular model of acute lymphoblastic leukaemia (CCRF-CEM). To do so, we investigated both possible hypotheses about the ZnONPs mechanism of toxicity: a free zinc ions release and/or reactive oxygen species (ROS) generation. Presented here results show that: Our results support the hypothesis that the mechanism of ZnONPs cytotoxicity is based on the release of free zinc ions. Nevertheless, both previously quoted hypotheses incompletely described the mechanism of action of ZnONPs. In this paper, we show that the mechanism of cytotoxicity of ZnONPs is based on the induction of reductive stress in CCRF-CEM cells, which is caused by free zinc ions released from ZnONPs. Therefore, the increase of oxidative stress markers is most likely a secondary response of the cells towards the Zn2+. These results provide a crucial expansion of the zinc ion hypothesis and thus explain the biphasic cellular response of CCRF-CEM cells treated with ZnONPs.

Structures, Antioxidant Properties, and Antimicrobial Properties of Eu(III), Gd(III), and Dy(III) Caffeinates and p-Coumarates

In this study, we investigated the structures of lanthanide (Eu(III), Dy(III), and Gd(III)) complexes with p-coumaric (p-CAH2) and caffeic (CFAH3) acids using the FTIRKBr, FTIRATR, and Raman spectroscopic methods. The compositions of the solid phase caffeinates and p-coumarates were obtained on the basis of the amounts of hydrogen and carbon determined using an elemental analysis. The degree of hydration and the thermal decomposition of each compound were examined via a thermal analysis of TG, DTG, and DSC. Antioxidant spectroscopic tests were performed using the DPPH (1,1-diphenyl-2-picrylhydrazyl radical), FRAP (ferric reducing antioxidant activity), and ABTS (2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (diammonium salt radical cation) methods. The antimicrobial activity of each compound against Escherichia coli, Bacillus subtilis, and Candida albicans was investigated. The electrical properties of the liposomes which mimicked the microbial surfaces formed in the electrolyte containing the tested compounds were also investigated. The above biological properties of the obtained complexes were compared with the activities of p-CAH2 and CFAH3. The obtained data suggest that lanthanide complexes are much more thermally stable and have higher antimicrobial and antioxidant properties than the ligands (with the exception of CFAH3 in the case of antioxidant activity tests). The Gd(III) complexes revealed the highest biological activity among the studied lanthanide complexes.

Bacterial cell permeability study by metal oxide and mixed metal oxide nanoparticles: analysis of the factors contributing to the antibacterial activity of nanoparticles

In this work, we investigate the nanoparticle-cell wall interaction by NiO and mixed metal oxide CuO-NiO nanoparticles. We have synthesized and characterized the nanoparticles using XRD, FESEM, EDS, UV vis. spectroscopy, FTIR, Zeta, and TEM analysis in our previous work. Furthermore, a preliminary antibacterial study showed that both the nanoparticles performed very well as antibacterial agents. In this extended work, we investigate the mechanism of interaction of NiO and CuO-NiO nanoparticles with S. aureus and E. coli cells as there are number of studies for antibacterial mechanism of CuO nanoparticles. The uptake of crystal violet dye in the outer bacterial membrane, the release of ß-galactosidase enzyme, and relative electric conductivity assay were used to investigate changes in the permeability and integrity of the cell membrane. Superoxide ions, which are produced intracellularly as ROS by nanoparticles, severely damage bacterial membranes. Zeta potential measurement, which resulted in surface charge neutralization, proved membrane instability. FTIR analysis was used to identify changes in the proteins, carbohydrates, and fatty acids that make up the chemical composition of cell surfaces. AFM imaging demonstrated extensive alteration of the nanomechanical and surface characteristics. Confocal microscopy examination supported the DNA fragmentation and nanoparticle-cell adhesion. Due to their enhanced antibacterial activity when compared to monometallic oxide nanoparticles, this study demonstrated that mixed metal oxides can be employed in the health and biomedical sectors.

Fabrication of Co-Assembly from Berberine and Tannic Acid for Multidrug-Resistant Bacteria Infection Treatment

Long-term antibiotic use induces drug resistance in bacteria. This has given rise to the challenge of refractory infections, which have become a global health threat. Berberine (BBR) and tannic acid (TA) from plants exhibit promising antibacterial activities and may overcome antibiotic resistance. However, poor solubility and/or low penetration capability have limited their application. Carrier-free co-assembled nanocomposites composed entirely of BBR and TA exhibit improved or new properties and produce improved efficacy. Herein, we demonstrated that an ordered nanostructure could be spontaneously co-assembled by the solvent evaporation method using the two natural products. These co-assembled berberine-tannic acid nanoparticles (BBR-TA NPs) exhibited the best antibacterial effect compared with the corresponding physical mixture, pristine BBR, and some first-line antibiotics (benzylpenicillin potassium-BP and ciprofloxacin-Cip) against Staphylococcus aureus (S. aureus) and multidrug-resistant Staphylococcus aureus (MRSA). Even if the concentration of BBR-TA NPs was as low as 15.63 μg/mL, the antibacterial rate against S. aureus and MRSA was more than 80%. In addition to the synergistic effect of the two compounds, the antibacterial mechanism underlying the nanostructures was that they strongly adhered to the surface of the bacterial cell wall, thereby inducing cell membrane damage and intracellular ATP leakage. Furthermore, the in vivo wound healing effect of BBR-TA NPs was verified using an MRSA wound infection mouse model. The BBR-TA NPs achieved the best efficacy compared with BP and Cip. Moreover, cytotoxic and histopathological evaluations of mice revealed that the nanodrug had good biological safety. This facile and green co-assembly strategy for preparing nanoparticles provides a feasible reference for the clinical treatment of bacterial infection.

Exposure to polystyrene nanoparticles leads to changes in the zeta potential of bacterial cells

Polymer molecules, the main components of plastics, are an emerging pollutants in various environmental compartments (water, air, soil) that may induce several ecotoxicological effects on live organisms. Therefore, understanding how plastic particles interact with bacterial cell membranes is crucial in analysing their associated risks in ecosystems and human microbiota. However, relatively little is known about the interaction between nanoplastics and bacteria. The present work focuses on Staphylococcus aureus and Klebsiella pneumoniae, representing the Gram-positive and Gram-negative bacteria respectively, exposed to 100 nm diameter polystyrene nanoparticles (PS NPs). The nanoparticles attach to the cells' membranes of both bacteria, changing their electrical charge, but without the effect of killing the cells. PS NPs caused a change in zeta potential values (both species of bacterial strains), dependent on particle concentration, pH, as well as on exposure time of bacteria to them. Through the application of AFM and FTIR techniques, the presence of PS NPs on bacterial surfaces was detected, suggesting the affinity of the particles to bacterial components, but without any changes in the morphology of the tested bacteria. The zeta potential can be more widely used in the study of interactions between nanostructures and cells.

Biosynthesis of Nanoparticles from Various Biological Sources and Its Biomedical Applications

In the last few decades, the broad scope of nanomedicine has played an important role in the global healthcare industry. Biological acquisition methods to obtain nanoparticles (NPs) offer a low-cost, non-toxic, and environmentally friendly approach. This review shows recent data about several methods for procuring nanoparticles and an exhaustive elucidation of biological agents such as plants, algae, bacteria, fungi, actinomycete, and yeast. When compared to the physical, chemical, and biological approaches for obtaining nanoparticles, the biological approach has significant advantages such as non-toxicity and environmental friendliness, which support their significant use in therapeutic applications. The bio-mediated, procured nanoparticles not only help researchers but also manipulate particles to provide health and safety. In addition, we examined the significant biomedical applications of nanoparticles, such as antibacterial, antifungal, antiviral, anti-inflammatory, antidiabetic, antioxidant, and other medical applications. This review highlights the findings of current research on the bio-mediated acquisition of novel NPs and scrutinizes the various methods proposed to describe them. The bio-mediated synthesis of NPs from plant extracts has several advantages, including bioavailability, environmental friendliness, and low cost. Researchers have sequenced the analysis of the biochemical mechanisms and enzyme reactions of bio-mediated acquisition as well as the determination of the bioactive compounds mediated by nanoparticle acquisition. This review is primarily concerned with collating research from researchers from a variety of disciplines that frequently provides new clarifications to serious problems.

Review of Antimicrobial Nanocoatings in Medicine and Dentistry: Mechanisms of Action, Biocompatibility Performance, Safety, and Benefits Compared to Antibiotics

This review discusses topics relevant to the development of antimicrobial nanocoatings and nanoscale surface modifications for medical and dental applications. Nanomaterials have unique properties compared to their micro- and macro-scale counterparts and can be used to reduce or inhibit bacterial growth, surface colonization and biofilm development. Generally, nanocoatings exert their antimicrobial effects through biochemical reactions, production of reactive oxygen species or ionic release, while modified nanotopographies create a physically hostile surface for bacteria, killing cells via biomechanical damage. Nanocoatings may consist of metal nanoparticles including silver, copper, gold, zinc, titanium, and aluminum, while nonmetallic compounds used in nanocoatings may be carbon-based in the form of graphene or carbon nanotubes, or composed of silica or chitosan. Surface nanotopography can be modified by the inclusion of nanoprotrusions or black silicon. Two or more nanomaterials can be combined to form nanocomposites with distinct chemical or physical characteristics, allowing combination of different properties such as antimicrobial activity, biocompatibility, strength, and durability. Despite their wide range of applications in medical engineering, questions have been raised regarding potential toxicity and hazards. Current legal frameworks do not effectively regulate antimicrobial nanocoatings in matters of safety, with open questions remaining about risk analysis and occupational exposure limits not considering coating-based approaches. Bacterial resistance to nanomaterials is also a concern, especially where it may affect wider antimicrobial resistance. Nanocoatings have excellent potential for future use, but safe development of antimicrobials requires careful consideration of the "One Health" agenda, appropriate legislation, and risk assessment.

An osteogenic magnesium alloy with improved corrosion resistance, antibacterial, and mechanical properties for orthopedic applications

The aim of this study was to develop a novel biodegradable magnesium (Mg) alloy for bone implant applications. We used scandium (Sc; 2 wt %) and strontium (Sr; 2 wt %) as alloying elements due to their high biocompatibility, antibacterial efficacy, osteogenesis, and protective effects against corrosion. In the present work, we also examined the effect of a heat treatment process on the properties of the Mg-Sc-Sr alloy. Alloys were manufactured using a metal casting process followed by heat treatment. The microstructure, corrosion, mechanical properties, antibacterial activity, and osteogenic activity of the alloy were assessed in vitro. The results showed that the incorporation of Sc and Sr elements controlled the corrosion, reduced the hydrogen generation, and enhanced mechanical properties. Furthermore, alloying with Sc and Sr demonstrated a significantly enhanced antibacterial activity and decreased biofilm formation compared to control Mg. Also, culturing Mg-Sc-Sr alloy with human bone marrow-derived mesenchymal stromal cells showed a high degree of biocompatibility (>90% live cells) and a significant increase in osteoblastic differentiation in vitro shown by Alizarin red staining and alkaline phosphatase activity. Based on these results, the Mg-Sc-Sr alloy heat-treated at 400°C displayed optimal mechanical properties, corrosion rate, antibacterial efficacy, and osteoinductivity. These characteristics make the Mg-Sc-Sr alloy a promising candidate for biodegradable orthopedic implants in the fixation of bone fractures such as bone plate-screws or intramedullary nails.

Photocatalytic activity of biosynthesized silver nanoparticle fosters oxidative stress at nanoparticle interface resulting in antimicrobial and cytotoxic activities

Inside the biological milieu, nanoparticles with photocatalytic activity have potential to trigger cell death non-specifically due to production of reactive oxygen species (ROS) upon reacting with biological entities. Silver nanoparticle (AgNP) possessing narrow band gap energy can exhibit high light absorption property and significant photocatalytic activity. This study intends to explore the effects of ROS generated due to photocatalytic activity of AgNP on antimicrobial and cytotoxic propensities. To this end, AgNP was synthesized using the principle of green chemistry from the peel extract of Punica granatum L., and was characterized using UV-Vis spectroscope, transmission electron microscope and x-ray diffraction, and so forth. The antimicrobial activity of AgNP against studied bacteria indicated that, ROS generated at AgNP interface develop stress on bacterial membrane leading to bacterial cell death, whereas Alamar Blue dye reduction assay indicated that increased cytotoxic activity with increasing concentrations of AgNP. The γH2AX activity assay revealed that increasing the concentrations of AgNP increased DNA damaging activity. The results altogether demonstrated that both antimicrobial and cytotoxic propensities are triggered primarily due interfacial ROS generation by photocatalytic AgNP, which caused membrane deformation in bacteria and DNA damage in HT1080 cells resulting in cell death.

Effect of Sublethal Concentrations of Zinc Oxide Nanoparticles on Bacillus cereus

Zinc oxide nanoparticles (ZnONPs), which are produced on a large scale, pose a potential threat to various environments because they can interact with the microbial populations found in them. Bacteria that are widespread in soil, water, and plant material include the Bacillus cereus group, which plays an important role in biodegradation and the nutrient cycle and is a major factor determining ecological balance. This group includes, among others, the foodborne pathogen B. cereus sensu stricto (herein referred to as B. cereus). The aim of this study was a comprehensive assessment of the effects of commercially available ZnONPs on B. cereus. The MIC (minimum inhibitory concentration) for B. cereus was 1.6 mg/mL, and the MBC (minimum bactericidal concentration) was 1.8 mg/mL. Growth of B. cereus was inhibited by a concentration of ZnONPs lower than or equal to MIC50. Concentrations from 0.2 to 0.8 mg/mL inhibited the growth of these bacteria in liquid media, induced symptoms of oxidative stress, and stimulated an environmental stress response in the form of biofilm and endospore formation. In addition, ZnONPs negatively affected the ability of the bacteria to break down the azo dye Evans Blue but enhanced the antimicrobial properties of phenolic compounds. Sublethal concentrations of ZnONPs generally decreased the activity of B. cereus cells, especially in the presence of phenolics, which indicates their potential toxicological impact, but at the same time they induced universal defence responses in these cells, which in the case of potential pathogens can hinder their removal.

Phytochemical-Based Nanomaterials against Antibiotic-Resistant Bacteria: An Updated Review

Antibiotic-resistant bacteria (ARB) is a growing global health threat, leading to the search for alternative strategies to combat bacterial infections. Phytochemicals, which are naturally occurring compounds found in plants, have shown potential as antimicrobial agents; however, therapy with these agents has certain limitations. The use of nanotechnology combined with antibacterial phytochemicals could help achieve greater antibacterial capacity against ARB by providing improved mechanical, physicochemical, biopharmaceutical, bioavailability, morphological or release properties. This review aims to provide an updated overview of the current state of research on the use of phytochemical-based nanomaterials for the treatment against ARB, with a special focus on polymeric nanofibers and nanoparticles. The review discusses the various types of phytochemicals that have been incorporated into different nanomaterials, the methods used to synthesize these materials, and the results of studies evaluating their antimicrobial activity. The challenges and limitations of using phytochemical-based nanomaterials, as well as future directions for research in this field, are also considered here. Overall, this review highlights the potential of phytochemical-based nanomaterials as a promising strategy for the treatment against ARB, but also stresses the need for further studies to fully understand their mechanisms of action and optimize their use in clinical settings.

Flow electrochemical inactivation of waterborne bacterial endospores

Waterborne pathogens have the risk of spreading waterborne diseases and even pandemics. Some Gram-positive bacteria can form endospores, the hardiest known life form that can withstand heat, radiation, and chemicals. Electrochemical inactivation may offer a promising solution, but is hindered by low inactivation efficiencies resulting from limitation of electrode/endospores interaction in terms of electrochemical reaction selectivity and mass transfer. Herein, these issues were addressed through modifying selectivity of active species formation using electroactive ceramic membrane with high oxygen evolution potential, improving mass transfer property by flow-through operation. In this way, inactivation (6.0-log) of Bacillus atrophaeus endospores was achieved. Theoretical and experimental results demonstrated synergistic inactivation to occur through fragmentation of coat via interfacial electron transfer and electro-produced transient radicals (•OH primarily, •Cl and Cl₂^•- secondarily), thereby increasing cell permeability to facilitate penetration of electro-produced persistent active chlorine for subsequent rupture of intracellular structures. Numbering-up electrode module strategy was proposed to scale up the system, achieving average 5.3-log inactivation of pathogenic Bacillus anthracis endospores for 30 days. This study demonstrates a proof-of-concept manner for effective inactivation of waterborne bacterial endospores, which may provide an appealing strategy for wide-range applications like water disinfection, bio-safety control and defense against biological warfare.