Metallomics: the concept and methodology

Long-term effects of SARS-CoV-2 infection on metal homeostasis

The outbreak of COVID-19 pandemic has caused substantial health loss worldwide, and the long-term sequelae of COVID, resulting from repeated coronavirus infection, have emerged as a new public health concern. We report the widespread presence of abnormal metallomic profiles in the sera of patients who have recovered from SARS-CoV-2 coronavirus infection, even after 6 months post-discharge from hospital. We measured the concentrations of Fe, Cu, Zn, Se, Cr, Mn, Ba, Ni, Pb, Ag, As, Cd, Co, and V in the sera of 25 recovered participants and 38 healthy controls in the cross-sectional study. Higher concentrations of Cu, Ag, As, Ba, Cd, Ni, Pb, Cr and V were observed in the recovered participants, whereas lower concentrations of Fe and Se were obtained in these participants. Except for Zn, Mn, and Co, all other elements showed significant differences (p < 0.05) between the two groups, with variations dependent on age and gender. Further correlation analysis between metallome and metabolome indicated that SARS-CoV-2 infection continues to disrupt metallic homeostasis and affect metabolic processes, such as lipid metabolism and cell respiration, as well as the functions of certain organs (e.g., liver, kidney, and heart), even after 6 months recovery. Our findings provide novel insights into the potential long-term effect of COVID-19 on the human body from a new perspective of metallomics.

Landmark Publications in Analytical Atomic Spectrometry: Fundamentals and Instrumentation Development

The almost-two-centuries history of spectrochemical analysis has generated a body of literature so vast that it has become nearly intractable for experts, much less for those wishing to enter the field. Authoritative, focused reviews help to address this problem but become so granular that the overall directions of the field are lost. This broader perspective can be provided partially by general overviews but then the thinking, experimental details, theoretical underpinnings, and instrumental innovations of the original work must be sacrificed. In the present compilation, this dilemma is overcome by assembling the most impactful publications in the area of analytical atomic spectrometry. Each entry was proposed by at least one current expert in the field and supported by a narrative that justifies its inclusion. The entries were then assembled into a coherent sequence and returned to contributors for a round-robin review. A total of 48 scientists participated in this endeavor, contributing a combined list of 1055 individual articles spanning 17 sub-disciplines of spectrochemical analysis into what the current community views as "key" publications. Of these cited articles, 60 received nominations from four or more scientists, establishing them as the most indispensable reading materials. The outcome of this collaborative effort is intended to serve as a valuable resource not only for current practitioners in atomic spectroscopy but also for present and future students who represent coming generations of analytical atomic spectroscopists.

Advances in the Design of Photoactivatable Metallodrugs: Excited State Metallomics

Photoactivatable metal complexes offer the prospect of novel drugs with low side effects and new mechanisms of action to combat resistance to current therapy. We highlight recent progress in the design of platinum, ruthenium, iridium, gold and other transition metal complexes, especially for applications as anticancer and anti-infective agents. In particular, understanding excited state chemistry related to identification of the bioactive species (excited state metallomics/pharmacophores) is important. Photoactivatable metallodrugs are classified here as photocatalysts, photorelease agents and ligand-activated agents. Their activation wavelengths, cellular mechanisms of action, experimental and theoretical metallomics of excited states and photoproducts are discussed to explore new strategies for the design and investigation of photoactivatable metallodrugs. These photoactivatable metallodrugs have potential in clinical applications of Photodynamic Therapy (PDT), Photoactivated Chemotherapy (PACT) and Photothermal Therapy (PTT).

Synthesis of biologically active cefpodoxime and vanillin-based schiff base metal complexes with the detailed biological evaluations

Schiff bases of existing antimicrobial drugs are an area, which is still to be comprehensively explored to improve drug efficiency against consistently resisting bacterial species. In this study, we have targeted a new and eco-friendly method of condensation reaction that allows the "green synthesis" as well as improved biological efficacy. The transition metal complexes of cefpodoxime with well-enhanced biological activities were synthesized. The condensation reaction product of cefpodoxime and vanillin was further reacted with suitable metal salts of [Mn (II), Cu (II), Fe (II), Zn (II), and Ni (II)] with 1:2 molar ratio (metal: ligand). The characterization of all the products were carried out by using UV-Visible, elemental analyzer, FTIR, 1H-NMR, ICP-OES, and LC-MS. Electronic data obtained by UV-Visible proved the octahedral geometry of metal complexes. The biological activities Schiff base ligand and its transition metal complexes were tested by using in-vitro anti-bacterial analysis against various Gram-negative, as well as Gram-positive bacterial strains. Proteinase and protein denaturation inhibition assays were utilized to evaluate the products in-vitro anti-inflammatory activities. The in vitro antioxidant activity of the ligand and its complexes was evaluated by utilizing the 2,2-diphenyl-1-picrylhydrazyl (DPPH) in-vitro method. The final results proved metal complexes to be more effective against bacterial microorganisms as compared to respective parent drug as well as their free ligands. Patch Dock, a molecular docking tool, was used to dock complexes 1a-5e with the crystal structure of GlcN-6-P synthase (ID: 1MOQ). According to the docking results, complex 2b exhibited a highest score (8,882; ACE = -580.43 kcal/mol) that is well correlated with a high inhibition as compared to other complexes which corresponds to the antibacterial screening outcomes.

Strategies for the development of metalloimmunotherapies

Metal ions play crucial roles in the regulation of immune pathways. In fact, metallodrugs have a long record of accomplishment as effective treatments for a wide range of diseases. Here we argue that the modulation of interactions of metal ions with molecules and cells involved in the immune system forms the basis of a new class of immunotherapies. By examining how metal ions modulate the innate and adaptive immune systems, as well as host-microbiota interactions, we discuss strategies for the development of such metalloimmunotherapies for the treatment of cancer and other immune-related diseases.

Quantification of snake venom proteomes by mass spectrometry-considerations and perspectives

The advent of soft ionization mass spectrometry-based proteomics in the 1990s led to the development of a new dimension in biology that conceptually allows for the integral analysis of whole proteomes. This transition from a reductionist to a global-integrative approach is conditioned to the capability of proteomic platforms to generate and analyze complete qualitative and quantitative proteomics data. Paradoxically, the underlying analytical technique, molecular mass spectrometry, is inherently nonquantitative. The turn of the century witnessed the development of analytical strategies to endow proteomics with the ability to quantify proteomes of model organisms in the sense of "an organism for which comprehensive molecular (genomic and/or transcriptomic) resources are available." This essay presents an overview of the strategies and the lights and shadows of the most popular quantification methods highlighting the common misuse of label-free approaches developed for model species' when applied to quantify the individual components of proteomes of nonmodel species (In this essay we use the term "non-model" organisms for species lacking comprehensive molecular (genomic and/or transcriptomic) resources, a circumstance that, as we detail in this review-essay, conditions the quantification of their proteomes.). We also point out the opportunity of combining elemental and molecular mass spectrometry systems into a hybrid instrumental configuration for the parallel identification and absolute quantification of venom proteomes. The successful application of this novel mass spectrometry configuration in snake venomics represents a proof-of-concept for a broader and more routine application of hybrid elemental/molecular mass spectrometry setups in other areas of the proteomics field, such as phosphoproteomics, metallomics, and in general in any biological process where a heteroatom (i.e., any atom other than C, H, O, N) forms integral part of its mechanism.

Selenium Discrepancies in Fetal Bovine Serum: Impact on Cellular Selenoprotein Expression

Selenium is an essential trace element in our diet, crucial for the composition of human selenoproteins, which include 25 genes such as glutathione peroxidases and thioredoxin reductases. The regulation of the selenoproteome primarily hinges on the bioavailability of selenium, either from dietary sources or cell culture media. This selenium-dependent control follows a specific hierarchy, with "housekeeping" selenoproteins maintaining constant expression while "stress-regulated" counterparts respond to selenium level fluctuations. This study investigates the variability in fetal bovine serum (FBS) selenium concentrations among commercial batches and its effects on the expression of specific stress-related cellular selenoproteins. Despite the limitations of our study, which exclusively used HEK293 cells and focused on a subset of selenoproteins, our findings highlight the substantial impact of serum selenium levels on selenoprotein expression, particularly for GPX1 and GPX4. The luciferase reporter assay emerged as a sensitive and precise method for evaluating selenium levels in cell culture environments. While not exhaustive, this analysis provides valuable insights into selenium-mediated selenoprotein regulation, emphasizing the importance of serum composition in cellular responses and offering guidance for researchers in the selenoprotein field.

Interaction of carbonic anhydrase I released from red blood cells with human plasma in vitro

Red blood cells (RBCs) constitute ∼50% of the bloodstream and represent an important target for environmental pollutants and bacterial/viral infections, which can result in their rupture. In addition, diseases such as sickle cell anaemia and paroxysmal nocturnal haemoglobinuria can also result in the rupture of RBCs, which can be potentially life-threatening. With regard to the release of cytosolic metalloproteins from RBCs into the blood-organ system, the biochemical fate of haemoglobin is rather well understood, while comparatively little is known about another highly abundant Zn-metalloprotein, carbonic anhydrase (CA I). To gain insight into the interaction of CA I with human blood plasma constituents, we have employed a metallomics tool comprised of size-exclusion chromatography (SEC) coupled online with an inductively coupled plasma atomic emission spectrometer (ICP-AES), which allows to simultaneously observe all Cu, Fe, and Zn-metalloproteins. After the addition of CA I to human blood plasma incubated at 37°C, the SEC-ICP-AES analysis using phosphate buffered saline (pH 7.4) after 5 min, 1 h, and 2 h revealed that CA I eluted after all endogenous Zn-metalloproteins in the 30 kDa range. Matrix-assisted laser desorption-time of flight mass spectrometry analysis of the collected Zn-peak confirmed that CA I eluted from the column intact. Our in vitro results suggest that CA I released from RBCs to plasma remains free and may be actively involved in health-relevant adverse processes that unfold at the bloodstream-endothelial interface, including atherosclerosis and vision loss.

Metallomics: An Essential Tool for the Study of Potential Antiparasitic Metallodrugs

Metallomics is an emerging area of omics approaches that has grown enormously in the past few years. It integrates research related to metals in biological systems, in symbiosis with genomics and proteomics. These omics approaches can provide in-depth insights into the mechanisms of action of potential metallodrugs, including their physiological metabolism and their molecular targets. Herein, we review the most significant advances concerning cellular uptake and subcellular distribution assays of different potential metallodrugs with activity against Trypanosma cruzi, the protozoan parasite that causes Chagas disease, a pressing health problem in high-poverty areas of Latin America. Furthermore, the first multiomics approaches including metallomics, proteomics, and transcriptomics for the comprehensive study of potential metallodrugs with anti-Trypanosoma cruzi activity are described.

Single Chain Nanoparticles in Catalysis

Over the last six decades folded polymer chains-so-called Single Chain Nanoparticles (SCNPs)-have evolved from the mere concept of intramolecularly crosslinked polymer chains to tailored nanoreactors, underpinned by a plethora of techniques and chemistries to tailor and analyze their morphology and function. These monomolecular polymer entities hold critical promise in a wide range of applications. Herein, we highlight the exciting progress that has been made in the field of catalytically active SCNPs in recent years.

Fasten the analysis of metal-binding proteins with GE-ICP-MS via increasing the electrolyte concentration of the running buffer

The coupled system of column gel electrophoresis and inductively coupled plasma mass spectrometry (GE-ICP-MS) is a highly effective technique for detecting metal-binding proteins. However, it takes a long time for this method to test a single sample, which greatly limits its application. In this study, GE-ICP-MS system was optimized by adjusting the analytical conditions, including the concentration and pH of running buffer and the proportion of polyacrylamide gel. The results of the experiment showed that the migration speed of proteins in GE was enhanced by increasing the electrolyte concentration in the running buffer solution. Additionally, the ICP-MS response, which was dramatically decreased because of the change in running buffer solution, can be stabilized by adjusting pH of running buffer. Meanwhile, the optimization of polyacrylamide gel ratio allows GE-ICP-MS to maintain high resolution for proteins of similar molecular weight with increased detection speed. After increasing the concentration of running buffer by 10 times, four iodine labeled proteins were successfully separated at baseline by the GE-ICP-MS system at pH 8.0 in 40 min using a resolving gel (8%, 7 cm) and a stacking gel (4%, 1 cm), which was three times faster than the original one. Finally, the optimized method was proved by detecting a silver-binding protein in rat plasma samples. The above method provided an effective and rapid detection for metal-binding proteins in organism.

Extending the range of metal ions SERS detection using hybrid plasmonic/ZIF-8 particles

Nanosensors based on surface-enhanced Raman spectroscopy (SERS) have emerged as a class of promising optical tools for the ultrasensitive quantification of metal ions of environmental and biological interest. A central bottleneck in this field is the availability of suitable surface receptors able to convert the selective binding with these vibrationless analytes into measurable SERS signals. In this work, we tackle this issue by employing a hybrid substrate comprising a highly SERS-active plasmonic core and a ZIF-8 metal-organic framework (MOF) shell. The ZIF-8 shell firmly captures aromatic receptors close to the plasmonic structure regardless of their intrinsic affinity for the metallic surface and without altering their ability to coordinate metal ions. Furthermore, it imparts molecular sieving abilities enabling the direct use of the SERS sensing platform in complex media such as biological fluids. This was demonstrated by using different classes of chromogenic reagents (bathocuproine, a 2,6':2',2″-terpyridine derivative, and Arsenazo III) which were exploited for the SERS detection of both transition and alkaline earth metal ions (i.e., divalent copper, cobalt and calcium ions). Notably, we successfully applied this approach for the detection of Cu(II) in untreated urine samples for Wilson's disease diagnosis. Overall, we believe this class of multifunctional hybrid substrates will serve as a valuable material for expanding the applicability of SERS spectroscopy in real-life environmental and biomedical metal ions analysis.

Recent advances in metal-organic framework (MOF)-based agricultural sensors for metal ions: a review

Metal ions have great significance for agricultural development, food safety, and human health. In turn, there exists an imperative need for the development of novel, sensitive, and reliable sensing techniques for various metal ions. Agricultural sensors for the diagnosis of both agricultural safety and nutritional health can establish quality and safety traceability systems of both agro-products and food to guarantee human health, even life safety. Metal-organic frameworks (MOFs) are utilized widely for the design of diversified sensors due to their distinctive structural characteristics and extraordinary optical and electrical properties. To serve agricultural sensors better, this review is dedicated to providing a brief overview of the synthesis of MOFs, the modification of MOFs, the fabrication of MOF-based film electrodes, the applications of MOF-based agricultural sensors for metal ions, which are centered on electrochemical sensors and optical sensors, and current challenges of MOF-based agricultural sensors. In addition, this review also provides potential future opportunities for the development and practical application of agricultural sensors.

Omics insights into the responses to dietary selenium

Selenium is a well-known health-relevant element related with cancer chemoprevention, neuroprotective roles, beneficial in diabetes, and in several infectious diseases, among others. It is naturally present in some foods, but deficiency in people led to the production of nutraceuticals, supplements, and functional food enriched in this element. There is a U-shaped link between selenium levels and health and a narrow range between toxic and essential levels, and thus, supplementation should be performed carefully. Omics methodologies have become valuable approaches to delve into the responses of dietary selenium in mammals that allowed a deeper knowledge about the metabolism of this element as well as its biological role. In this review, we discuss omics approaches from the workflows to their applications that has been previously used to deep insight into the metabolism of dietary selenium. There is a special focus on selenoproteins, metabolomics responses in blood and tissues (e.g., brain, reproductive organs, etc.) as well as the impact on gut microbiota and its metabolites profile. Thus, we mainly reviewed heteroatom-tagged proteomics, metallomics, metabolomics, and metataxonomics, usually combined with transcriptomics, genomics, and other molecular methods.

Quantitative imaging of trace elements in solid samples by online isotope dilution laser ablation-inductively coupled plasma-mass spectrometry

For quantitative visualization of trace elements, an online isotope dilution (ID) laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) method capable of accurately correcting the detection amount of targets is presented. Two aerosols from an ablated sample and a nebulized isotopically enriched spike solution were mixed online using a dual-port spray chamber. In this paper, transmission efficiency (TE) of each of the two gas streams to the ICP-MS detector is revealed, and the quantification values were corrected by including the ratio of TEs in the calculation of the online ID method. To verify the developed method, Fe and Sr as model elements in five certified reference materials (CRMs, glass: SRM 610, 612, 614, alloy: SS-356, -383) were quantified without the use of matrix-matched CRMs. The resultant values agreed with the certified values of CRMs in the range of 92.7-104.7% and 92.8-109.0% for Fe and Sr, respectively. The LODs (3σ) were 0.54 and 0.17 μg g-1 for Fe and Sr, respectively. In addition, the applicability of this method to quantitative imaging of unknown solid samples was demonstrated for actual biological hard tissues (a mouse incisor, human primary tooth, and fish otolith) using the result of shot-analysis. The results were consistent with the reported concentration range obtained by wet chemical analysis.

Mass spectrometry-based metabolomic analysis as a tool for quality control of natural complex products

Metabolomics is an area of intriguing and growing interest. Since the late 1990s, when the first Omic applications appeared to study metabolite's pool ("metabolome"), to understand new aspects of the global regulation of cellular metabolism in biology, there have been many evolutions. Currently, there are many applications in different fields such as clinical, medical, agricultural, and food. In our opinion, it is clear that developments in metabolomics analysis have also been driven by advances in mass spectrometry (MS) technology. As natural complex products (NCPs) are increasingly used around the world as medicines, food supplements, and substance-based medical devices, their analysis using metabolomic approaches will help to bring more and more rigor to scientific studies and industrial production monitoring. This review is intended to emphasize the importance of metabolomics as a powerful tool for studying NCPs, by which significant advantages can be obtained in terms of elucidation of their composition, biological effects, and quality control. The different approaches of metabolomic analysis, the main and basic techniques of multivariate statistical analysis are also briefly illustrated, to allow an overview of the workflow associated with the metabolomic studies of NCPs. Therefore, various articles and reviews are illustrated and commented as examples of the application of MS-based metabolomics to NCPs.

Toenail arsenic species and metallome profiles associated with breast, cervical, prostate, and skin cancer prevalence in the Atlantic Partnership for Tomorrow's Health cohort

Introduction

Chronic exposure to arsenic through drinking water has been linked to several cancers. The metabolism of arsenic is thought to play a key role in arsenic-related carcinogenesis as metabolites of varying toxicity are produced and either stored in or excreted from the body. Atlantic Canada has the highest age-standardized incidence rates of all cancers in the country. This may be due to its high levels of environmental arsenic and the prevalence of unregulated private wells for water consumption. Here, we aimed to characterize the profiles of arsenic species and metallome in the toenails of four cancer groups, compare them to healthy participants (N = 338), and assess potential associations between the profiles with cancer prevalence.

Methods

This study employed a case-control design. Toenail samples and questionnaire data from cases (breast, cervical, prostate, and skin cancers) and controls were sourced from the Atlantic Partnership for Tomorrow's Health (PATH) cohort study. The levels of arsenic species were measured using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) paired with High Performance Liquid Chromatography (HPLC) and total concentrations of metallome (23 metals) were determined by ICP-MS separately. Multivariate analyses were conducted to compare cases with controls within each cancer group.

Results

Arsenic speciation profiles varied by cancer type and were significantly different between cases and controls in the breast (p = 0.0330), cervical (p = 0.0228), and skin (p = 0.0228) cancer groups. In addition, the profiles of metallome (nine metals) were significantly differentiated in the prostate (p = 0.0244) and skin (p = 0.0321) cancer groups, with higher zinc concentrations among cases compared to controls.

Conclusion

History of cancer diagnosis was associated with specific profiles of arsenic species and metallome. Our results indicate that arsenic methylation and zinc levels, as measured in toenails, may be an important biomarker for cancer prevalence. Further research is needed to use toenails as a prognostic measure of arsenic-and other metal-induced cancer.

Iron Bioaccessibility and Speciation in Microalgae Used as a Dog Nutrition Supplement

Chlorella vulgaris, Arthrospira platensis, Haematoccocus pluvialis, and Phaeodactylum tricornutum are species of interest for commercial purposes due to their valuable nutritional profile. The aim of this study was to investigate the iron content in these four microalgae, with emphasis on their iron bioaccessibility assessed using an in vitro digestion system to simulate the process which takes place in the stomach and small intestine of dogs, followed by iron quantification using atomic absorption spectrometry. Furthermore, the extraction of soluble proteins was carried out and size exclusion chromatography was applied to investigate iron speciation. Significant differences (p < 0.004) in iron content were found between C. vulgaris, which had the highest (1347 ± 93 μg g^-1), and H. pluvialis, which had the lowest (216 ± 59 μg g^-1) iron content. C. vulgaris, A. platensis, and H. pluvialis showed an iron bioaccessibility of 30, 31, and 30%, respectively, while P. tricornutum showed the lowest bioaccessibility (11%). The four species analysed presented soluble iron mainly bound to proteins with high molecular mass ranging from >75 to 40 kDa. C. vulgaris showed the highest iron content associated with good bioaccessibility; therefore, it could be considered to be an interesting natural source of organic iron in dog nutrition.

Nano mercury selenide as a source of mercury for rice

Mercury (Hg) is a persistent and toxic metal while mercury selenide (HgSe) is generally considered as the environmental sink of Hg in its biogeochemical cycle. Recent studies found nano-sized HgSe (nano-HgSe) could be transformed by certain bacteria. This raises safety concerns about the application of selenium (Se) to curb Hg contamination in farmlands. Therefore, hydroponic experiments were performed in which rice plants were cultured with different concentrations of nano-HgSe and micro-sized HgSe (micro-HgSe) to explore their bioavailability and toxicity. It was found that both nano-HgSe and micro-HgSe did not affect the germination of rice seeds but affected the growth of rice seedlings. However, nano-HgSe could be more readily absorbed by roots and transferred to the aboveground parts compared to micro-HgSe. The highest Hg and Se levels were found to be 5255.67 ± 2496.14 μg/g and 1743.75 ± 61.87 μg/g, respectively in roots when exposed to 5000 mg/L nano-HgSe. Besides, small portion (1.2%) of methylmercury (MeHg) to total Hg was found accumulated in rice stem when exposed to 100 mg/L nano-HgSe, suggesting that nano-HgSe could be decomposed. Furthermore, nano-HgSe exposure brought oxidative damage to rice with decreased chlorophyll content and GSH-Px activity. In all, nano-HgSe was found to be more absorbable, transportable and methylated in rice plant compared to micro-HgSe. This suggests that although Se application in Hg contaminated farmland is an effective way to reduce the bioavailability of Hg, the risk of the possible remobilization of HgSe should not be neglected. Besides, the finding that nano-HgSe can act as an environmental source of Hg for plants deepens the understanding of biogeochemical cycle of Hg. More works are required to study the factors affecting the formation of nano-HgSe in the environment and the mechanisms of Hg methylation in rice plants after exposure to nano-HgSe.

Evaluation of the accumulation of the iodinated contrast agents diatrizoic acid and iohexol in Dreissena polymorpha mollusks

Mollusks are very sensitive to aquatic environmental alterations and then, are important bio-indicators for monitoring the contamination of water bodies. Iodinated X-ray contrast media (ICMs) are ubiquitously present in the aquatic environment, primarily due to their high consumption for diagnosis purposes, high injection levels, low biodegradability, and low removal rates by wastewater treatment plants. Although these compounds are assumed to be of low toxicity, aquatic organisms are continuously exposed to these agents, which may result in adverse effects as ICMs can act as iodine source and disrupt the endocrine system. Thus, the evaluation of their environmental risk, especially on aquatic fauna is of great interest. To this end, we first compared the accumulation behavior, based on iodine analysis, of two ICM exhibiting different osmolality, diatrizoic acid and iohexol in Dreissena polymorpha bivalves exposed under laboratory conditions at concentrations of 0, 100, and 1000 μg/L during 4 and 7 days. This study was the first to provide information on iodine concentration in whole soft tissues and several organs in control zebra mussels. Moreover, it showed, after exposure, an increase of iodine content mainly in the digestive glands, followed by gills and gonads, highlighting that ICMs actually enter the organisms. Thus, bioaccumulation of ICMs studies were then performed, by liquid chromatography coupled to tandem mass spectrometry, on entire mollusks and digestive glands of organisms exposed at 0, 10, 100, and 1000 μg/L of both ICMs during 21 days, followed by 4 days of depuration. These first data on ICMs concentrations in zebra mussels, showed a clear accumulation of ICMs in mussels as a function of relative exposure level, as well as a rapid depuration. Osmolality did not seem to have a significant impact on the accumulation level, but a slight difference was observed on the accumulation pattern between both ICMs.

Zincon-Modified CNTs Electrochemical Tool for Salivary and Urinary Zinc Detection

Recently, the abnormal level of zinc emerged as a powerful indicator or risk factor for metabolic, endocrine, neurodegenerative and cardiovascular diseases, including cancer. Electrochemical detection has been explored to quantify zinc in a precise, rapid, and non-expensive way; however, most of the current electrochemical systems lack in specificity. In this work we studied a highly selective and sensitive electrochemical method to detect quickly and reliably free zinc ions (Zn²⁺). The surface of the working electrode was modified with zincon electropolymerized on carbon nanotube (CNT) to enable the binding of zinc in complex body fluids. After being physicochemically characterized, the performances of the zincon-CNT complex was electrochemically assessed. Square Wave Voltammetry (SWV) was used to determine the calibration curve and the linear range of zinc quantification in artificial saliva and urine. This zincon- CNT system could specifically quantify mobile Zn²⁺ in salivary and urinary matrices with a sensitivity of ~100 ng·mL^-1 and a limit of detection (LOD) of ~20 ng·mL^-1. Zincon-modified CNT presented as a desirable candidate for the detection and quantification of free zinc in easily body fluids that potentially can become a diagnostic non-invasive testing platform.

Iron Content, Iron Speciation and Phycocyanin in Commercial Samples of Arthrospira spp

Cyanobacteria are characterized by high iron content. In this research, we collected ten commercial samples of Arthrospira spp. sold as food supplement to determine iron content and assess whether iron speciation showed variability among samples and changed respect to A. platensis grown in controlled conditions. Particular attention was also paid to phycocyanin, as an iron-binding protein. In six of the ten samples, 14 essential and non-essential trace elements were analysed using ICP-MS. Iron content measured in samples using atomic absorption spectrometry (AAS) varied from 353 (sample S5) to 1459 (sample S7) µg g^-1 dry weight and was in the range of those reported by other authors in commercial supplements. Iron speciation was studied using size exclusion chromatography followed by the analysis of the collected fraction for the determination of iron by AAS and for protein separation using SDS-PAGE. Overlapping chromatographic profiles were obtained for total proteins, phycocyanin and iron, although quantitative differences were evidenced among the samples analysed. In most samples, iron was mainly bound to ligands with high molecular mass; however, in four samples iron was also bound to ligands with low molecular mass. In fractions containing the most relevant iron burden, the principal protein was phycocyanin, confirming its role as an iron-binding protein in commercial samples.

Metallophenolomics: A Novel Integrated Approach to Study Complexation of Plant Phenolics with Metal/Metalloid Ions

Plant adaptive strategies have been shaped during evolutionary development in the constant interaction with a plethora of environmental factors, including the presence of metals/metalloids in the environment. Among adaptive reactions against either the excess of trace elements or toxic doses of non-essential elements, their complexation with molecular endogenous ligands, including phenolics, has received increasing attention. Currently, the complexation of phenolics with metal(loid)s is a topic of intensive studies in different scientific fields. In spite of the numerous studies on their chelating capacity, the systemic analysis of phenolics as plant ligands has not been performed yet. Such a systematizing can be performed based on the modern approach of metallomics as an integral biometal science, which in turn has been differentiated into subgroups according to the nature of the bioligands. In this regard, the present review summarizes phenolics–metal(loid)s’ interactions using the metallomic approach. Experimental results on the chelating activity of representative compounds from different phenolic subgroups in vitro and in vivo are systematized. General properties of phenolic ligands and specific properties of anthocyanins are revealed. The novel concept of metallophenolomics is proposed, as a ligand-oriented subgroup of metallomics, which is an integrated approach to study phenolics–metal(loid)s’ complexations. The research subjects of metallophenolomics are outlined according to the methodology of metallomic studies, including mission-oriented biometal sciences (environmental sciences, food sciences and nutrition, medicine, cosmetology, coloration technologies, chemical sciences, material sciences, solar cell sciences). Metallophenolomics opens new prospects to unite multidisciplinary investigations of phenolic–metal(loid) interactions.

Arsenic Speciation and Metallomics Profiling of Human Toenails as a Biomarker to Assess Prostate Cancer Cases: Atlantic PATH Cohort Study

Chronic exposure to inorganic arsenic and trace metals has been linked to prostate cancer, and altered arsenic methylation capacity may have an important role in arsenic carcinogenesis. Biomarkers may be able to elucidate this role. Our objectives were to characterize profiles of arsenic species and metallome in toenails and urine samples, compare profiles between prostate cancer cases and controls, and determine the discriminant ability of toenail and urine biomarkers. Toenail samples (n = 576), urine samples (n = 152), and questionnaire data were sourced from the Atlantic Partnership for Tomorrow's Health (PATH) cohort study. Healthy controls were matched to prostate cancer cases (3:1 ratio) on sex, age, smoking status, and the province of residence. Metallome profiles and proportions of arsenic species were measured in toenail and urine samples. Analysis of covariance (ANCOVA) was used to compare the mean percent monomethylarsonic acid (%MMA), dimethylarsonic acid (%DMA), inorganic arsenic (%iAs), primary methylation index (PMI, MMA/iAs), and secondary methylation index (SMI, DMA/MMA). Multivariate analysis of covariance (MANCOVA) was used to compare selected metal concentrations. Mean %MMA was significantly lower and SMI was significantly higher in toenails from prostate cancer cases compared to controls in unadjusted and adjusted models. Proportions of arsenic species were correlated with total arsenic in toenails. Arsenic speciation in urine was not different between cases and controls, nor were metallome profiles in toenails and urine. Our results indicate that toenails are a viable biomarker for altered arsenic speciation in prostate cancer cases and may have greater utility than urine in this context.

Iron Speciation and Iron Binding Proteins in Arthrospira platensis Grown in Media Containing Different Iron Concentrations

Cyanobacteria are characterized by high iron content. This study investigated the effects of varying iron concentrations (1, 5, and 10 mg L^-1) in the culture media on the biochemical composition and the iron bioaccumulation and speciation in Arthrospira platensis F&M-C256. Iron content measured in biomasses varied from 0.35 to 2.34 mg g^-1 dry weight depending on the iron concentration in the culture media. These biomasses can be considered of interest for the production of spirulina-based supplements with low and high iron content. Iron speciation was studied using size exclusion chromatography followed by atomic absorption spectrometry and proteomic analysis. The role of C-phycocyanin as an iron binding protein was also investigated. Overall, the present results provide a better understanding of iron metabolism in cyanobacteria and a foundation for further studies.

COSPAR Sample Safety Assessment Framework (SSAF)

The Committee on Space Research (COSPAR) Sample Safety Assessment Framework (SSAF) has been developed by a COSPAR appointed Working Group. The objective of the sample safety assessment would be to evaluate whether samples returned from Mars could be harmful for Earth's systems (e.g., environment, biosphere, geochemical cycles). During the Working Group's deliberations, it became clear that a comprehensive assessment to predict the effects of introducing life in new environments or ecologies is difficult and practically impossible, even for terrestrial life and certainly more so for unknown extraterrestrial life. To manage expectations, the scope of the SSAF was adjusted to evaluate only whether the presence of martian life can be excluded in samples returned from Mars. If the presence of martian life cannot be excluded, a Hold & Critical Review must be established to evaluate the risk management measures and decide on the next steps. The SSAF starts from a positive hypothesis (there is martian life in the samples), which is complementary to the null-hypothesis (there is no martian life in the samples) typically used for science. Testing the positive hypothesis includes four elements: (1) Bayesian statistics, (2) subsampling strategy, (3) test sequence, and (4) decision criteria. The test sequence capability covers self-replicating and non-self-replicating biology and biologically active molecules. Most of the investigations associated with the SSAF would need to be carried out within biological containment. The SSAF is described in sufficient detail to support planning activities for a Sample Receiving Facility (SRF) and for preparing science announcements, while at the same time acknowledging that further work is required before a detailed Sample Safety Assessment Protocol (SSAP) can be developed. The three major open issues to be addressed to optimize and implement the SSAF are (1) setting a value for the level of assurance to effectively exclude the presence of martian life in the samples, (2) carrying out an analogue test program, and (3) acquiring relevant contamination knowledge from all Mars Sample Return (MSR) flight and ground elements. Although the SSAF was developed specifically for assessing samples from Mars in the context of the currently planned NASA-ESA MSR Campaign, this framework and the basic safety approach are applicable to any other Mars sample return mission concept, with minor adjustments in the execution part related to the specific nature of the samples to be returned. The SSAF is also considered a sound basis for other COSPAR Planetary Protection Category V, restricted Earth return missions beyond Mars. It is anticipated that the SSAF will be subject to future review by the various MSR stakeholders.

Recent advances in the application of metallomics in diagnosis and prognosis of human cancer

Metals play a critical role in human health and diseases. In recent years, metallomics has been introduced and extensively applied to investigate the distribution, regulation, function, and crosstalk of metal(loid) ions in various physiological and pathological processes. Based on high-throughput multielemental analytical techniques and bioinformatics methods, it is possible to elucidate the correlation between the metabolism and homeostasis of diverse metals and complex diseases, in particular for cancer. This review aims to provide an overview of recent progress made in the application of metallomics in cancer research. We mainly focuses on the studies about metallomic profiling of different human biological samples for several major types of cancer, which reveal distinct and dynamic patterns of metal ion contents and the potential benefits of using such information in the detection and prognosis of these malignancies. Elevated levels of copper appear to be a significant risk factor for various cancers, and each type of cancer has a unique distribution of metals in biofluids, hair/nails, and tumor-affected tissues. Furthermore, associations between genetic variations in representative metalloprotein genes and cancer susceptibility have also been demonstrated. Overall, metallomics not only offers a better understanding of the relationship between metal dyshomeostasis and the development of cancer but also facilitates the discovery of new diagnostic and prognostic markers for cancer translational medicine.

Speciomics as a concept involving chemical speciation and omics

The study of chemical speciation and the refinement and expansion of omics-based methods are both consolidated and highly active research fields. Although well established, such fields are extremely dynamic and are driven by the emergence of new strategies and improvements in instrumentation. In the case of omics-based studies, subareas including lipidomics, proteomics, metallomics, metabolomics and foodomics have emerged. Here, speciomics is being proposed as an "umbrella" term, that incorporates all of these subareas, to capture studies where the evaluation of chemical species is carried out using omics approaches. This paper contextualizes both speciomics and the speciome, and reviews omics applications used for species identification through examination of proteins, metalloproteins, metabolites, and nucleic acids. In addition, some implications from such studies and a perspective for future development of this area are provided. SIGNIFICANCE: The synergic effect between chemical speciation and omics is highlighted in this work, demonstrating an emerging area of research with a multitude of possibilities in terms of applications and further developments. This work not only defines and contextualizes speciomics and individual speciomes, but also demonstrates with some examples the great potential of this new interdisciplinary area of research.

New insights in copper handling strategies in the green alga Chlamydomonas reinhardtii under low-iron condition

Copper (Cu) is a redox-active transition element critical to various metabolic processes. These functions are accomplished in tandem with Cu binding ligands, mainly proteins. The main goal of this work was to understand the mechanisms that govern the intracellular fate of Cu in the freshwater green alga, Chlamydomonas reinhardtii, and more specifically to understand the mechanisms underlying Cu detoxification by algal cells in low-Fe conditions. We show that Cu accumulation was up to 51-fold greater for algae exposed to Cu in low-Fe medium as compared to the replete-Fe growth medium. Using the stable isotope 65Cu as a tracer, we studied the subcellular distribution of Cu within the various cell compartments of C. reinhardtii. These data were coupled with metallomic and proteomic approaches to identify potential Cu-binding ligands in the heat-stable protein and peptide fractions of the cytosol. Cu was mostly found in the organelles (78%), and in the heat-stable proteins and peptides (21%) fractions. The organelle fraction appeared to also be the main target compartment of Cu accumulation in Fe-depleted cells. As Fe levels in the medium were shown to influence Cu homeostasis, we found that C. reinhardtii can cope with this additional stress by utilizing different Cu-binding ligands. Indeed, in addition to expected Cu-binding ligands such as glutathione and phytochelatins, 25 proteins were detected that may also play a role in the Cu detoxification processes in C. reinhardtii. Our results shed new light on the coping mechanisms of C. reinhardtii when exposed to environmental conditions that induce high rates of Cu accumulation.

Identification of the hormetic dose-response and regulatory network of multiple metals co-exposure-related hypertension via integration of metallomics and adverse outcome pathways

Environmental stressors, including heavy metals, can be associated with hypertension development. However, little information regarding the dose-response relationship and toxicity mechanisms of metal mixtures with hypertension development is currently available. Therefore, we recruited 940 participants from six factories in northeastern China and measured the urinary concentrations of 19 metals. Then, we used Bayesian kernel machine regression (BKMR) to explore associations between metals co-exposure and hypertension. The BKMR model indicated a hermetic dose-response relationship between eight urinary metals (Co, Cr, Ni, Cd, As, Fe, Zn, and Pb) and hypertension risk. Moreover, heterogeneous and non-linear association patterns were detected across different metals/metalloids concentrations. Next, for the first time, we analyzed data of chemicals containing specific metal elements in the Comparative Toxicogenomics Database (CTD) from a disease perspective and provided insights from various biological levels to explain heavy metal co-exposure-related hypertension. On the molecular scale, 43 chemical components and 112 potential target genes were detected for metal exposure-related hypertension. Further, the network topology analysis indicated that target genes such as insulin (INS, degree = 78), albumin (ALB, degree = 74), renin (REN, degree = 71), interleukin-6 (IL6, degree = 70), endothelin 1 (EDN1, degree = 70), and endothelial nitric oxide synthase (NOS3, degree = 69) have a strong correlation with heavy metals co-exposure. Finally, we used integrative analyses in the adverse outcome pathway (AOP) wiki to analyze the co-exposure of heavy metals and hypertension and support an integrated metallomics approach. We selected the AOP 149 as the framework and found that the molecular initiating events (MIEs) of hypertension stems from the oxidation of AA residues on critical peptides of the NO pathway. The NOS3 was particularly promising since its subunit has three metal ion cross-linking domains with Zn²⁺, Fe²⁺, and Ga³⁺, which might serve as a binding site for heavy metal ions.

Metalloproteomics for Biomedical Research: Methodology and Applications

Metals are essential components in life processes and participate in many important biological processes. Dysregulation of metal homeostasis is correlated with many diseases. Metals are also frequently incorporated into diagnosis and therapeutics. Understanding of metal homeostasis under (patho)physiological conditions and the molecular mechanisms of action of metallodrugs in biological systems has positive impacts on human health. As an emerging interdisciplinary area of research, metalloproteomics involves investigating metal-protein interactions in biological systems at a proteome-wide scale, has received growing attention, and has been implemented into metal-related research. In this review, we summarize the recent advances in metalloproteomics methodologies and applications. We also highlight emerging single-cell metalloproteomics, including time-resolved inductively coupled plasma mass spectrometry, mass cytometry, and secondary ion mass spectrometry. Finally, we discuss future perspectives in metalloproteomics, aiming to attract more original research to develop more advanced methodologies, which could be utilized rapidly by biochemists or biologists to expand our knowledge of how metal functions in biology and medicine. Expected final online publication date for the Annual Review of Biochemistry, Volume 91 is June 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Global Mapping of Metalloproteomes

Metalloproteins play diverse and critical functions in all living systems, and their dysfunctional forms are closely related to many human diseases. The development of methods that enable comprehensive mapping of metalloproteome is of great interest to help elucidate crucial roles of metalloproteins in both physiology and pathology, as well as to discover new metalloproteins. We herein briefly review recent progress in the field of metalloproteomics and provide future outlooks.

Native Separation and Metallation Analysis of SOD1 Protein from the Human Central Nervous System: a Methodological Workflow

Studies of the metal content of metalloproteins in tissues from the human central nervous system (CNS) can be compromised by preparative techniques which alter levels of, or interactions between, metals and the protein of interest within a complex mixture. We developed a methodological workflow combining size exclusion chromatography, native isoelectric focusing, and either proton or synchrotron X-ray fluorescence within electrophoresis gels to analyze the endogenous metal content of copper-zinc superoxide dismutase (SOD1) purified from minimal amounts (<20 mg) of post-mortem human brain and spinal cord tissue. Abnormal metallation and aggregation of SOD1 are suspected to play a role in amyotrophic lateral sclerosis and Parkinson's disease, but data describing SOD1 metal occupancy in human tissues have not previously been reported. Validating our novel approach, we demonstrated step-by-step metal preservation, preserved SOD1 activity, and substantial enrichment of SOD1 protein versus confounding metalloproteins. We analyzed tissues from nine healthy individuals and five CNS regions (occipital cortex, substantia nigra, locus coeruleus, dorsal spinal cord, and ventral spinal cord). We found that Cu and Zn were bound to SOD1 in a ratio of 1.12 ± 0.28, a ratio very close to the expected value of 1. Our methodological workflow can be applied to the study of endogenous native SOD1 in a pathological context and adapted to a range of metalloproteins from human tissues and other sources.

The Metallome as a Link Between the "Omes" in Autism Spectrum Disorders

Metal dyshomeostasis plays a significant role in various neurological diseases such as Alzheimer's disease, Parkinson's disease, Autism Spectrum Disorders (ASD), and many more. Like studies investigating the proteome, transcriptome, epigenome, microbiome, etc., for years, metallomics studies have focused on data from their domain, i.e., trace metal composition, only. Still, few have considered the links between other "omes," which may together result in an individual's specific pathologies. In particular, ASD have been reported to have multitudes of possible causal effects. Metallomics data focusing on metal deficiencies and dyshomeostasis can be linked to functions of metalloenzymes, metal transporters, and transcription factors, thus affecting the proteome and transcriptome. Furthermore, recent studies in ASD have emphasized the gut-brain axis, with alterations in the microbiome being linked to changes in the metabolome and inflammatory processes. However, the microbiome and other "omes" are heavily influenced by the metallome. Thus, here, we will summarize the known implications of a changed metallome for other "omes" in the body in the context of "omics" studies in ASD. We will highlight possible connections and propose a model that may explain the so far independently reported pathologies in ASD.

Analytical Methodologies for Agrometallomics: A Critical Review

Agrometallomics, as an independent interdiscipline, is first defined and described in this review. Metallic elements widely exist in agricultural plants, animals and edible fungi, seed, fertilizer, pesticide, feedstuff, as well as the agricultural environment and ecology, and even functional and pathogenic microorganisms. So, the agrometallome plays a vital role in molecular and organismic mechanisms like environmetallomics, metabolomics, proteomics, lipidomics, glycomics, immunomics, genomics, etc. To further reveal the inner and mutual mechanism of the agrometallome, comprehensive and systematic methodologies for the analysis of beneficial and toxic metals are indispensable to investigate elemental existence, concentration, distribution, speciation, and forms in agricultural lives and media. Based on agrometallomics, this review summarizes and discusses the advanced technical progress and future perspectives of metallic analytical approaches, which are categorized into ultrasensitive and high-throughput analysis, elemental speciation and state analysis, and spatial- and microanalysis. Furthermore, the progress of agrometallomic innovativeness greatly depends on the innovative development of modern metallic analysis approaches including, but not limited to, high sensitivity, elemental coverage, and anti-interference; high-resolution isotopic analysis; solid sampling and nondestructive analysis; metal chemical species and metal forms, associated molecular clusters, and macromolecular complexes analysis; and metal-related particles or metal within the microsize and even single cell or subcellular analysis.

Omic methodologies for assessing metal(-loid)s-host-microbiota interplay: A review

Omic methodologies have become key analytical tools in a wide number of research topics such as systems biology, environmental analysis, biomedicine or food analysis. They are especially useful when they are combined providing a new perspective and a holistic view of the analytical problem. Methodologies for microbiota analysis have been mostly focused on genome sequencing. However, information provided by these metagenomic studies is limited to the identification of the presence of genes, taxa and their inferred functionality. To achieve a deeper knowledge of microbial functionality in health and disease, especially in dysbiosis conditions related to metal and metalloid exposure, the introduction of additional meta-omic approaches including metabolomics, metallomics, metatranscriptomics and metaproteomics results essential. The possible impact of metals and metalloids on the gut microbiota and their effects on gut-brain axis (GBA) only begin to be figured out. To this end new analytical workflows combining powerful tools are claimed such as high resolution mass spectrometry and heteroatom-tagged proteomics for the absolute quantification of metal-containing biomolecules using the metal as a "tag" in a sensitive and selective detector (e.g. ICP-MS). This review focus on current analytical methodologies related with the analytical techniques and procedures available for metallomics and microbiota analysis with a special attention on their advantages and drawbacks.

Environmental metal toxicity assessment by the combined application of metallomics and metabolomics

The growing interest of our society for the environment, climate change, and the assurance of the quality of life and health has been the motor of new methodological proposals that allow a more comprehensive knowledge of the problems to be solved. In this sense, the potential of omic methodologies to study these problems from a global perspective represents a milestone in environmental studies. Therefore, the study of essential and toxic metals has a special interest, particularly in relation to toxicity issues and their association to biological interactions, transport, binding to biomolecules, and behavior in biological interfaces. These studies have promoted new instrumental platforms and methodological approaches that allow addressing these problems. Furthermore, to encompass the reality of molecule-atoms interactions in their completeness, combinations of omics have been tried, focusing on environment, food, and health issues. In this sense, the present work is situated, with the objective of reviewing the most recent methodological proposals in the field of the environment and their applications, considering not only the analytical approaches but also how they have to be applied, the use of bioindicators' exposure experiments in the laboratory, and the potential transfer of the findings from the laboratory to the field. This latter point is a true touchstone, which makes these new analytical methodologies in the necessary tools for understanding the environment and the consequences of its imbalance.

Comparative nanometallomics as a new tool for nanosafety evaluation

Nanosafety evaluation is paramount since it is necessary not only for human health protection and environmental integrity but also as a cornerstone for industrial and regulatory bodies. The current nanometallomics did not cover non-metallic nanomaterials, which is an important part of nanomaterials. In this critical review, the concept of nanometallomics was expanded to incorporate all nanomaterials. The impacts on metal(loid) and metallo-biomolecular homeostasis by nanomaterials will be focused upon in nanometallomics study. Besides, the impacts on elemental and biomolecular homeostasis by metallo-nanomaterials are also considered as the research subjects of nanometallomics. Based on the new concept of nanometallomics, comparative nanometallomics was proposed as a new tool for nanosafety evaluation, which is high throughput and will be precise considering the nature of machine learning techniques. The perspectives of nanometallomics like metallo-wide association study and non-target nanometallomics were put forward.

The Exposome in the Era of One Health

Current studies on environmental chemistry mainly focus on a single stressor or single group of stressors, which does not reflect the multiple stressors in the dynamic exposome we are facing. Similarly, current studies on environmental toxicology mostly target humans, animals, or the environment separately, which are inadequate to solve the grand challenge of multiple receptors in One Health. Though chemical, biological, and physical stressors all pose health threats, the susceptibilities of different organisms are different. As such, significant relationships and interactions of the chemical, biological, and physical stressors in the environment and their holistic environmental and biological consequences remain unclear. Fortunately, the rapid developments in various techniques, as well as the concepts of multistressors in the exposome and multireceptor in One Health provide the possibilities to understand our environment better. Since the combined stressor is location-specific and mixture toxicity is species-specific, more comprehensive frameworks to guide risk assessment and environmental treatment are urgently needed. Here, three conceptual frameworks to categorize unknown stressors, spatially visualize the riskiest stressors, and investigate the combined effects of multiple stressors across multiple species within the concepts of the exposome and One Health are proposed for the first time.

Essential (Mg, Fe, Zn and Cu) and Non-Essential (Cd and Pb) Elements in Predatory Insects (Vespa crabro and Vespa velutina): A Molecular Perspective

The recent introduction of the Asian yellow-legged hornet, Vespa velutina, into Europe has raised concern regarding the threat to honeybees and the competition with the European hornet, Vespa crabro. The aim of this study was to investigated essential (Mg, Fe, Zn, Cu) and non-essential (Cd and Pb) elements in these two species. Element concentrations were determined in the whole body and separately in the head, thorax and abdomen using atomic absorption spectrometry (AAS). The changes in essential element concentration and speciation during metamorphosis were also studied using size exclusion chromatography followed by AAS and proteomic analysis. In both species, the essential elements were more concentrated in the abdomen due to the presence of fat bodies. Magnesium, Fe and Zn concentrations were significantly higher in V. crabro than in V. velutina and could have been related to the higher aerobic energy demand of the former species required to sustain foraging flight. Low concentrations of Cd and Pb were indicative of low environmental exposure. The concentration and speciation of essential elements, particularly Fe, varied among the developmental stages, indicating a modification of ligand preferences during metamorphosis. Overall, the results in the present study provide a better understanding of the hornet metal metabolism and a foundation for additional studies.

Disease Ionomics: Understanding the Role of Ions in Complex Disease

Ionomics is a novel multidisciplinary field that uses advanced techniques to investigate the composition and distribution of all minerals and trace elements in a living organism and their variations under diverse physiological and pathological conditions. It involves both high-throughput elemental profiling technologies and bioinformatic methods, providing opportunities to study the molecular mechanism underlying the metabolism, homeostasis, and cross-talk of these elements. While much effort has been made in exploring the ionomic traits relating to plant physiology and nutrition, the use of ionomics in the research of serious diseases is still in progress. In recent years, a number of ionomic studies have been carried out for a variety of complex diseases, which offer theoretical and practical insights into the etiology, early diagnosis, prognosis, and therapy of them. This review aims to give an overview of recent applications of ionomics in the study of complex diseases and discuss the latest advances and future trends in this area. Overall, disease ionomics may provide substantial information for systematic understanding of the properties of the elements and the dynamic network of elements involved in the onset and development of diseases.

Assessment of the Potential and Limitations of Elemental Mass Spectrometry in Life Sciences for Absolute Quantification of Biomolecules Using Generic Standards

Inductively coupled plasma-mass spectrometry (ICP-MS) has been widely used in Life Sciences for the absolute quantification of biomolecules without specific standards, assuming the same response for generic compounds including complex biomolecules. However, contradictory results have been published on this regard. We present the first critical statistical comparison of the ICP-MS response factors obtained for 14 different relevant S-containing biomolecules (three peptides, four proteins, one amino acid, two cofactors, three polyethylene glycol (PEG) derivatives, and sulfate standard), covering a wide range of hydrophobicities and molecular sizes. Two regular flow nebulizers and a total consumption nebulizer (TCN) were tested. ICP-MS response factors were determined though calibration curves, and isotope dilution analysis was used to normalize the results. No statistical differences have been found for low-molecular-weight biocompounds, PEGs, and nonhydrophobic peptides using any of the nebulizers tested. Interestingly, while statistical differences were still found negligible (96-104%) for the proteins and hydrophobic peptide using the TCN, significantly lower response factors (87-40%) were obtained using regular flow nebulizers. Such differential behavior seems to be related mostly to hydrophobicity and partially to the molecular weight. Findings were validated using IDA in intact and digested bovine serum albumin solutions using the TCN (98 and 100%, respectively) and the concentric nebulizer (73 and 97%, respectively). Additionally, in the case of a phosphoprotein, results were corroborated using the P trace in parallel to the S trace used along the manuscript. This work seems to suggest that ICP-MS operated with regular nebulizers can offer absolute quantification using generic standards for most biomolecules except proteins and hydrophobic peptides.

Isotope metallomics approaches for medical research

Metallomics is a rapidly evolving field of bio-metal research that integrates techniques and perspectives from other "-omics" sciences (e.g. genomics, proteomics) and from research vocations further afield. Perhaps the most esoteric of this latter category has been the recent coupling of biomedicine with element and isotope geochemistry, commonly referred to as isotope metallomics. Over the course of less than two decades, isotope metallomics has produced numerous benchmark studies highlighting the use of stable metal isotope distribution in developing disease diagnostics-e.g. cancer, neurodegeneration, osteoporosis-as well as their utility in deciphering the underlying mechanisms of such diseases. These pioneering works indicate an enormous wealth of potential and provide a call to action for researchers to combine and leverage expertise and resources to create a clear and meaningful path forward. Doing so with efficacy and impact will require not only building on existing research, but also broadening collaborative networks, bolstering and deepening cross-disciplinary channels, and establishing unified and realizable objectives. The aim of this review is to briefly summarize the field and its underpinnings, provide a directory of the state of the art, outline the most encouraging paths forward, including their limitations, outlook and speculative upcoming breakthroughs, and finally to offer a vision of how to cultivate isotope metallomics for an impactful future.

Open questions on the biological roles of first-row transition metals

First-row transition metals play several roles in biological processes and in medicine, but can be toxic in high concentrations. Here the authors comment on the sensitive biochemistry and speciation chemistry of the first-row transition metals, and outline some of the remaining questions that have yet to be answered.

Across the spectrum: integrating multidimensional metal analytics for in situ metallomic imaging

To know how much of a metal species is in a particular location within a biological context at any given time is essential for understanding the intricate roles of metals in biology and is the fundamental question upon which the field of metallomics was born. Simply put, seeing is powerful. With the combination of spectroscopy and microscopy, we can now see metals within complex biological matrices complemented by information about associated molecules and their structures. With the addition of mass spectrometry and particle beam based techniques, the field of view grows to cover greater sensitivities and spatial resolutions, addressing structural, functional and quantitative metallomic questions from the atomic level to whole body processes. In this perspective, I present a paradigm shift in the way we relate to and integrate current and developing metallomic analytics, highlighting both familiar and perhaps less well-known state of the art techniques for in situ metallomic imaging, specific biological applications, and their use in correlative studies. There is a genuine need to abandon scientific silos and, through the establishment of a metallomic scientific platform for further development of multidimensional analytics for in situ metallomic imaging, we have an incredible opportunity to enhance the field of metallomics and demonstrate how discovery research can be done more effectively.

Mild steel and stainless steel welding fumes elicit pro-inflammatory and pro-oxidant effects in first trimester trophoblast cells

Problem

As more women join the skilled‐trade workforce, the effects of workplace exposures on pregnancy need to be explored. This study aims to identify the effects of mild steel and stainless steel welding fume exposures on cultured placental trophoblast cells.

Method of study

Welding fumes (mild steel and stainless steel) were generously donated by Lincoln Electric. Electron microscopy was used to characterize welding fume particle size and the ability of particles to enter extravillous trophoblast cells (HTR‐8/SVneo). Cellular viability, free radical production, cytokine production, and ability of cells to maintain invasive properties were analyzed, respectively, by WST‐1, electron paramagnetic resonance, DCFH‐DA, V‐plex MULTI‐SPOT assay system, and a matrix gel invasion assay.

Results

For all three welding fume types, average particle size was <210 nm. HTR‐8/SVneo cells internalized welding particles, and nuclear condensation was observed. Cellular viability was significantly decreased at the high dose of 100 µg/mL for all three welding fumes, and stainless steel generated the greatest production of the hydroxyl radical, and intracellular reactive oxygen species. Production of the cytokines IL‐1β and TNFα were not observed in response to welding fume exposure, but IL‐6 and IL‐8 were. Finally, the invasive capability of cells was decreased upon exposure to both mild steel and stainless steel welding fumes.

Conclusion

Welding fumes are cytotoxic to extravillous trophoblasts, as is evident by the production of free radicals, pro‐inflammatory cytokines, and the observed decrease in invasive capabilities.