High-Frequency Optical Coherence Elastography for Gingival Tissue Characterization: Variability in Stiffness and Response to Physiological Conditions

Accurate measurement of gingiva's biomechanical properties in vivo has been an active field of research but remained an unmet challenge. Currently, there are no noninvasive tools that can accurately quantify tensile and shear moduli, which govern gingival health, with sufficiently high accuracy. This study presents the application of high-frequency optical coherence elastography (OCE) for characterizing gingival tissue in both porcine models and human subjects. Dynamic mechanical analysis, histology studies, and strain analysis are performed to support the OCE result. Our findings demonstrate substantial differences in tissue stiffness between supra-dental and inter-dental gingiva, validated by dynamic mechanical analysis and OCE. We confirmed the viscoelastic, nearly linear, and transverse-isotropic properties of gingiva in situ, establishing the reliability of OCE measurements. Further, we investigated the effects of tissue hydration, collagen degradation, and dehydration on gingival stiffness. These conditions showed a decrease and increase in stiffness, respectively. While preliminary, our study suggests OCE's potential in periodontal diagnosis and oral tissue engineering, offering real-time, millimeter-scale resolution assessments of tissue stiffness, crucial for clinical applications and biomaterial optimization in reconstructive surgeries.

Combination adipose-derived mesenchymal stem cells-demineralized dentin matrix increase bone marker expression in periodontitis rats

Background

Periodontal disease is common in both developed and developing countries and affects around 20-50% of the global population, especially in adolescents, adults and the elderly is a public health problem. ADMSCs have the advantage of regenerating damaged tissue with high quality. DDM in the form of slices can improve healing in the mandibular sockets of molar teeth. The combination of ADMSC-DDM is expected to accelerate bone regeneration.

Objectives

To analyze the combination of ADMSCs-DDM at increasing bone marker expression in periodontitis rats.

Methods

This research is experimental with a randomized control group post-test-only design. A total of 50 male Wistar rats were divided into four groups: 1) normal group (K); 2) CP model (K + ); 3) CP model and treated with DDM scaffold therapy (K(s)); 4) CP model and treated with ADMSCs-DDM combination therapy (K(sc)). Making a CP model with injected LPS P. gingivalis into interproximal gingiva of the right first and second lower molars. The in vivo research stage was the implantation of the DDM scaffold and the ADMSCs-DDM combination in the rat periodontal pocket. Rats were euthanized on days 7, 14, and 28, and immunohistochemistry of STRO-1, RUNX-2, OSX, COL-I, and OCN was performed. DDM scaffolds are made in 10%, 50% and 100% concentrations for MTT testing. Statistical results were analyzed with Kruskal-Wallis and Mann-Whitney tests.

Results

The results of the MTT scaffold DDM were significant in the 10%, 50%, and 100% dilution groups (p < 0.05). The results showed there was a substantial difference in the expression of STRO-1 between the study groups (p < 0.05). The (K(sc)) was significantly higher than the (K) in RUNX-2 expression (p < 0.05). OSX expression showed significant results between study groups (p < 0.05). The expression of OCN and COL-I showed a significant difference in all study groups on day 28, where the (K(sc)) was higher than the (K) (p < 0.05).

Conclusions

Administration of the ADMSCs-DDM combination can accelerate alveolar bone regeneration on day 28. There is a mechanism of alveolar bone regeneration through the STRO-1, RUNX-2, OSX, and the COL-I pathway in periodontitis models.

Biopolymers and Their Application in Bioprinting Processes for Dental Tissue Engineering

Dental tissues are composed of multiple tissues with complex organization, such as dentin, gingiva, periodontal ligament, and alveolar bone. These tissues have different mechanical and biological properties that are essential for their functions. Therefore, dental diseases and injuries pose significant challenges for restorative dentistry, as they require innovative strategies to regenerate damaged or missing dental tissues. Biomimetic bioconstructs that can effectively integrate with native tissues and restore their functionalities are desirable for dental tissue regeneration. However, fabricating such bioconstructs is challenging due to the diversity and complexity of dental tissues. This review provides a comprehensive overview of the recent developments in polymer-based tissue engineering and three-dimensional (3D) printing technologies for dental tissue regeneration. It also discusses the current state-of-the-art, focusing on key techniques, such as polymeric biomaterials and 3D printing with or without cells, used in tissue engineering for dental tissues. Moreover, the final section of this paper identifies the challenges and future directions of this promising research field.

Biofabrication of engineered dento-alveolar tissue

Oral health is essential for a good overall health. Dento-alveolar conditions have a high prevalence, ranging from tooth decay periodontitis to alveolar bone resorption. However, oral tissues exhibit a limited regenerative capacity, and full recovery is challenging. Therefore, regenerative therapies for dento-alveolar tissue (e.g., alveolar bone, periodontal membrane, dentin-pulp complex) have gained much attention, and novel approaches have been proposed in recent decades. This review focuses on the cells, biomaterials and the biofabrication methods used to develop therapies for tooth root bioengineering. Examples of the techniques covered are the multitude of additive manufacturing techniques and bioprinting approaches used to create scaffolds or tissue constructs. Furthermore, biomaterials and stem cells utilized during biofabrication will also be described for different target tissues. As these new therapies gradually become a reality in the lab, the translation to the clinic is still minute, with a further need to overcome multiple challenges and broaden the clinical application of these alternatives.

Biodegradation of an injectable treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration

BACKGROUND

A novel injectable mixture termed treated dentin matrix hydrogel (TDMH) has been introduced for restoring dentin defect in DPC. However, no study evaluated its physiological biodegradation. Therefore, the present study aimed to assess scaffold homogeneity, mechanical properties and biodegradability in vitro and in vivo and the regenerated dentin induced by TDMH as a novel pulp capping agent in human permanent teeth.

METHODS

Three TDMH discs were weighted, and dry/wet ratios were calculated in four slices from each disc to evaluate homogeneity. Hydrogel discs were also analyzed in triplicate to measure the compressive strength using a universal testing machine. The in vitro degradation behavior of hydrogel in PBS at 37 °C for 2 months was also investigated by monitoring the percent weight change. Moreover, 20 intact fully erupted premolars were included for assessment of TDMH in vivo biodegradation when used as a novel injectable pulp capping agent. The capped teeth were divided into four equal groups according to extraction interval after 2-, 8-, 12- and 16-weeks, stained with hematoxylin-eosin for histological and histomorphometric evaluation. Statistical analysis was performed using F test (ANOVA) and post hoc test (p = 0.05).

RESULTS

No statistical differences among hydrogel slices were detected with (p = 0.192) according to homogeneity. TDMH compression modulus was (30.45 ± 1.11 kPa). Hydrogel retained its shape well up to 4 weeks and after 8 weeks completely degraded. Histological analysis after 16 weeks showed a significant reduction in TDMH area and a simultaneous significant increase in the new dentin area. The mean values of TDMH were 58.8% ± 5.9 and 9.8% ± 3.3 at 2 and 16 weeks, while the new dentin occupied 9.5% ± 2.8 at 2 weeks and 82.9% ± 3.8 at 16 weeks.

CONCLUSIONS

TDMH was homogenous and exhibited significant stability and almost completely recovered after excessive compression. TDMH generally maintained their bulk geometry throughout 7 weeks. The in vivo response to TDMH was characterized by extensive degradation of the hydrogel and dentin matrix particles and abundant formation of new dentin. The degradation rate of TDMH matched the rate of new dentin formation.

TRIAL REGISTRATION

PACTR201901866476410: 30/1/2019.

Therapeutic strategies of three-dimensional stem cell spheroids and organoids for tissue repair and regeneration

Three-dimensional (3D) stem cell culture systems have attracted considerable attention as a way to better mimic the complex interactions between individual cells and the extracellular matrix (ECM) that occur in vivo. Moreover, 3D cell culture systems have unique properties that help guide specific functions, growth, and processes of stem cells (e.g., embryogenesis, morphogenesis, and organogenesis). Thus, 3D stem cell culture systems that mimic in vivo environments enable basic research about various tissues and organs. In this review, we focus on the advanced therapeutic applications of stem cell-based 3D culture systems generated using different engineering techniques. Specifically, we summarize the historical advancements of 3D cell culture systems and discuss the therapeutic applications of stem cell-based spheroids and organoids, including engineering techniques for tissue repair and regeneration.

Biomimetic Approaches in Clinical Endodontics

In the last few decades, biomimetic concepts have been widely adopted in various biomedical fields, including clinical dentistry. Endodontics is an important sub-branch of dentistry which deals with the different conditions of pulp to prevent tooth loss. Traditionally, common procedures, namely pulp capping, root canal treatment, apexification, and apexigonesis, have been considered for the treatment of different pulp conditions using selected materials. However, clinically to regenerate dental pulp, tissue engineering has been advocated as a feasible approach. Currently, new trends are emerging in terms of regenerative endodontics which have led to the replacement of diseased and non-vital teeth into the functional and healthy dentine-pulp complex. Root- canal therapy is the standard management option when dental pulp is damaged irreversibly. This treatment modality involves soft-tissue removal and then filling that gap through the obturation technique with a synthetic material. The formation of tubular dentine and pulp-like tissue formation occurs when stem cells are transplanted into the root canal with an appropriate scaffold material. To sum up tissue engineering approach includes three components: (1) scaffold, (2) differentiation, growth, and factors, and (3) the recruitment of stem cells within the pulp or from the periapical region. The aim of this paper is to thoroughly review and discuss various pulp-regenerative approaches and materials used in regenerative endodontics which may highlight the current trends and future research prospects in this particular area.

Supramolecular Adhesive Hydrogels for Tissue Engineering Applications

Tissue engineering is a promising and revolutionary strategy to treat patients who suffer the loss or failure of an organ or tissue, with the aim to restore the dysfunctional tissues and enhance life expectancy. Supramolecular adhesive hydrogels are emerging as appealing materials for tissue engineering applications owing to their favorable attributes such as tailorable structure, inherent flexibility, excellent biocompatibility, near-physiological environment, dynamic mechanical strength, and particularly attractive self-adhesiveness. In this review, the key design principles and various supramolecular strategies to construct adhesive hydrogels are comprehensively summarized. Thereafter, the recent research progress regarding their tissue engineering applications, including primarily dermal tissue repair, muscle tissue repair, bone tissue repair, neural tissue repair, vascular tissue repair, oral tissue repair, corneal tissue repair, cardiac tissue repair, fetal membrane repair, hepatic tissue repair, and gastric tissue repair, is systematically highlighted. Finally, the scientific challenges and the remaining opportunities are underlined to show a full picture of the supramolecular adhesive hydrogels. This review is expected to offer comparative views and critical insights to inspire more advanced studies on supramolecular adhesive hydrogels and pave the way for different fields even beyond tissue engineering applications.

Capacity for increased surface area in the hydrophobic core of β-sheet peptide bilayer nanoribbons

Amphipathic peptides with amino acids arranged in alternating patterns of hydrophobic and hydrophilic residues efficiently self-assemble into β-sheet bilayer nanoribbons. Hydrophobic side chain functionality is effectively buried in the interior of the putative bilayer of these nanoribbons. This study investigates consequences on self-assembly of increasing the surface area of aromatic side chain groups that reside in the hydrophobic core of nanoribbons derived from Ac-(XKXE)2 -NH2 peptides (X = hydrophobic residue). A series of Ac-(XKXE)2 -NH2 peptides incorporating aromatic amino acids of increasing molecular volume and steric profile (X = phenylalanine [Phe], homophenylalanine [Hph], tryptophan [Trp], 1-naphthylalanine [1-Nal], 2-naphthylalanine [2-Nal], or biphenylalanine [Bip]) were assessed to determine substitution effects on self-assembly propensity and on morphology of the resulting nanoribbon structures. Additional studies were conducted to determine the effects of incorporating amino acids of differing steric profile in the hydrophobic core (Ac-X1 KFEFKFE-NH2 and Ac-(X1,5 KFE)-NH2 peptides, X = Trp or Bip). Spectroscopic analysis by circular dichroism (CD) and Fourier transform infrared (FT-IR) spectroscopy indicated β-sheet formation for all variants. Self-assembly rate increased with peptide hydrophobicity; increased molecular volume of the hydrophobic side chain groups did not appear to induce kinetic penalties on self-assembly rates. Transmission electron microscopy (TEM) imaging indicated variation in fibril morphology as a function of amino acid in the X positions. This study confirms that hydrophobicity of amphipathic Ac-(XKXE)2 -NH2 peptides correlates to self-assembly propensity and that the hydrophobic core of the resulting nanoribbon bilayers has a significant capacity to accommodate sterically demanding functional groups. These findings provide insight that may be used to guide the exploitation of self-assembled amphipathic peptides as functional biomaterials.

Hydrogels and Dentin-Pulp Complex Regeneration: From the Benchtop to Clinical Translation

Dentin-pulp complex is a term which refers to the dental pulp (DP) surrounded by dentin along its peripheries. Dentin and dental pulp are highly specialized tissues, which can be affected by various insults, primarily by dental caries. Regeneration of the dentin-pulp complex is of paramount importance to regain tooth vitality. The regenerative endodontic procedure (REP) is a relatively current approach, which aims to regenerate the dentin-pulp complex through stimulating the differentiation of resident or transplanted stem/progenitor cells. Hydrogel-based scaffolds are a unique category of three dimensional polymeric networks with high water content. They are hydrophilic, biocompatible, with tunable degradation patterns and mechanical properties, in addition to the ability to be loaded with various bioactive molecules. Furthermore, hydrogels have a considerable degree of flexibility and elasticity, mimicking the cell extracellular matrix (ECM), particularly that of the DP. The current review presents how for dentin-pulp complex regeneration, the application of injectable hydrogels combined with stem/progenitor cells could represent a promising approach. According to the source of the polymeric chain forming the hydrogel, they can be classified into natural, synthetic or hybrid hydrogels, combining natural and synthetic ones. Natural polymers are bioactive, highly biocompatible, and biodegradable by naturally occurring enzymes or via hydrolysis. On the other hand, synthetic polymers offer tunable mechanical properties, thermostability and durability as compared to natural hydrogels. Hybrid hydrogels combine the benefits of synthetic and natural polymers. Hydrogels can be biofunctionalized with cell-binding sequences as arginine-glycine-aspartic acid (RGD), can be used for local delivery of bioactive molecules and cellularized with stem cells for dentin-pulp regeneration. Formulating a hydrogel scaffold material fulfilling the required criteria in regenerative endodontics is still an area of active research, which shows promising potential for replacing conventional endodontic treatments in the near future.

Biomimetic Aspects of Restorative Dentistry Biomaterials

Biomimetic has emerged as a multi-disciplinary science in several biomedical subjects in recent decades, including biomaterials and dentistry. In restorative dentistry, biomimetic approaches have been applied for a range of applications, such as restoring tooth defects using bioinspired peptides to achieve remineralization, bioactive and biomimetic biomaterials, and tissue engineering for regeneration. Advancements in the modern adhesive restorative materials, understanding of biomaterial-tissue interaction at the nano and microscale further enhanced the restorative materials' properties (such as color, morphology, and strength) to mimic natural teeth. In addition, the tissue-engineering approaches resulted in regeneration of lost or damaged dental tissues mimicking their natural counterpart. The aim of the present article is to review various biomimetic approaches used to replace lost or damaged dental tissues using restorative biomaterials and tissue-engineering techniques. In addition, tooth structure, and various biomimetic properties of dental restorative materials and tissue-engineering scaffold materials, are discussed.

Chitosan/PAMAM/Hydroxyapatite Engineered Drug Release Hydrogels with Tunable Rheological Properties

In this paper, a new formulation of biodegradable and bioresorbable chitosan-based hydrogel for controlled drug release was investigated. A chitosan-dendrimer-hydroxyapatite hydrogel, obtained by covalently grafting chitosan powder with an hyperbranched PAMAM dendrimer followed by in-situ precipitation of hydroxyapatite and gelification, was synthesized and characterized by FTIR, NMR, TGA, XRD and rheological studies. The hydrogels have been also doped with an anti-inflammatory drug (ketoprofen) in order to investigate their drug release properties. Chemical and chemical-physical characterizations confirmed the successful covalent functionalization of chitosan with PAMAM and the synthesis of nanostructured hydroxyapatite. The developed hydrogel made it possible to obtain an innovative system with tunable rheological and drug-releasing properties relative to the well-known formulation containing chitosan and hydroxyapatite powder. The developed hydrogel showed different rheological and drug-releasing properties of chitosan matrix mixed with hydroxyapatite as a function of dendrimer molecular weight; therefore, the chitosan-dendrimer-hydroxyapatite hydrogel can couple the well-known osteoconductive properties of hydroxyapatite with the drug-release behavior and good processability of chitosan-dendrimer hydrogels, opening new approaches in the field of tissue engineering based on biopolymeric scaffolds.

Functionalized polyhedral oligosilsesquioxane (POSS) based composites for bone tissue engineering: synthesis, computational and biological studies

Functionalized polyhedral oligosilsesquioxanes (POSS) containing an isoxazolidine nucleus have been synthesized by microwave assisted 1,3-dipolar cycloaddition of N-methyl-C-alkoxycarbonyl nitrone 1 with POSS containing olefin moieties. The results of cycloaddition processes were rationalized by computational studies at the DFT level. The covalent conjugation of chitosan with the cycloadduct 3a leads to composite material CS-POSS 7 which was gelified using genipin as cross linking agent. The suitability of the system for bone tissue engineering purposes was evaluated by in vitro drug release studies using ketoprofen as a model drug and cytotoxicity assays performed on human fetal osteoblastic cells. The preliminary biological tests showed the lack of cytotoxicity of the hybrid material and suggest its potential role in bone tissue engineering applications.

One-step treatment of periodontitis based on a core-shell micelle-in-nanofiber membrane with time-programmed drug release

As a chronic inflammatory disease, periodontitis is responsible for irreversible soft tissue damage and severe alveolar bone resorption. However, curative effects of current therapies are largely confined by the difficulty to simultaneously achieve anti-inflammation and bone regeneration. Also, the dynamic environment in oral cavity easily causes the drugs swallowed or rinsed away by saliva. We report here a one-step treatment based on a core-shell nanofiber membrane fabricated by coaxial electrospinning. Polymeric micelles containing SP600125 were distributed in the shell, while BMP-2 was incorporated in the core. After crosslinking, the nanofiber membrane displayed a prolonged degradation and release period up to 4 weeks. The release of SP600125 was detected at beginning, whereas BMP-2 was not released until day 12. Such a time-programmed release behavior was proved desirable for suppressing the expression of pro-inflammatory factors and enhancing the osteogenic induction in vitro. Further in vivo investigation confirmed that, by simply covering the periodontitis site with our nanofiber membrane, alveolar destruction was largely avoided and bone defects recovered within 2 month. Taken together, we believe that the use of our membrane with sequential release of SP600125 and BMP-2 may become a convenient and highly comprehensive therapy for periodontitis.

Biomaterial-Based Approaches for Regeneration of Periodontal Ligament and Cementum Using 3D Platforms

Currently, various tissue engineering strategies have been developed for multiple tissue regeneration and integrative structure formations as well as single tissue formation in musculoskeletal complexes. In particular, the regeneration of periodontal tissues or tooth-supportive structures is still challenging to spatiotemporally compartmentalize PCL (poly-ε-caprolactone)-cementum constructs with micron-scaled interfaces, integrative tissue (or cementum) formations with optimal dimensions along the tooth-root surfaces, and specific orientations of engineered periodontal ligaments (PDLs). Here, we discuss current advanced approaches to spatiotemporally control PDL orientations with specific angulations and to regenerate cementum layers on the tooth-root surfaces with Sharpey's fiber anchorages for state-of-the-art periodontal tissue engineering.

Cementum regeneration using stem cells in the dog model: A systematic review

OBJECTIVE

Restoring lost tissues of the periodontium, such as cementum, is essential in reducing the risk of tooth loss due to periodontitis and/or severe root resorption. Stem cell therapy is a regenerative strategy in cementum regeneration. This systematic review aimed to analyze the effect of various stem cells and their transplantation method on cementum regeneration in the dog model.

METHODS

Electronic databases were searched, in addition to performing hand searches and a gray literature search. Titles and abstracts were searched according to the inclusion criteria and full texts were selected to be included in this systematic review. Data was extracted from each article and risk of bias was assessed for individual studies.

RESULTS

Most studies reported that the treatment using a variety of stem cells resulted in significantly greater cementum regeneration.

CONCLUSIONS

Because of variations in additional factors included in each study and varied risk of bias among those studies, the effect of each type of stem cell on cementum regeneration in dogs is difficult to clarify. Additional information needs to be obtained from each study in order to further analyze the individual effect of stem cells on cementum regeneration in dogs.

Advances and perspectives in tooth tissue engineering

Bio-engineered teeth that can grow and remodel in a manner similar to that of natural teeth have the potential to serve as permanent replacements to the currently used prosthetic teeth, such as dental implants. A major challenge in designing functional bio-engineered teeth is to mimic both the structural and anisotropic mechanical characteristics of the native tooth. Therefore, the field of dental and whole tooth regeneration has advanced towards the molecular and nanoscale design of bio-active, biomimetic systems, using biomaterials, drug delivery systems and stem cells. The focus of this review is to discuss recent advances in tooth tissue engineering, using biomimetic scaffolds that provide proper architectural cues, exhibit the capacity to support dental stem cell proliferation and differentiation and sequester and release bio-active agents, such as growth factors and nucleic acids, in a spatiotemporal controlled manner. Although many in vitro and in vivo studies on tooth regeneration appear promising, before tooth tissue engineering becomes a reality for humans, additional research is needed to perfect methods that use adult human dental stem cells, as opposed to embryonic dental stem cells, and to devise the means to generate bio-engineered teeth of predetermined size and shape. Copyright © 2016 John Wiley & Sons, Ltd.

Progress in Bioengineered Whole Tooth Research: From Bench to Dental Patient Chair

Tooth loss is a significant health issue that affects the physiological and social aspects of everyday life. Missing teeth impair simple tasks of chewing and speaking, and can also contribute to reduced self-confidence. An emerging and exciting area of regenerative medicine based dental research focuses on the formation of bioengineered whole tooth replacement therapies that can provide both the function and sensory responsiveness of natural teeth. This area of research aims to enhance the quality of dental and oral health for those suffering from tooth loss. Current approaches use a combination of dental progenitor cells, scaffolds and growth factors to create biologically based replacement teeth to serve as improved alternatives to currently used artificial dental prosthetics. This article is an overview of current progress, challenges, and future clinical applications of bioengineered whole teeth.

Sequence length determinants for self-assembly of amphipathic β-sheet peptides

Amphipathic peptides composed of alternating hydrophobic and hydrophilic amino acids are a privileged class of peptide, which have a high propensity to self-assemble into β-sheet fibrils. The Ac-(FKFE)2-NH2 peptide has been extensively studied and forms putative β-sheet bilayer fibrils in which the hydrophobic Phe side chains are organized to a single face of each constituent sheet; upon bilayer formation, these hydrophobic benzyl groups are sequestered in the hydrophobic core of the resulting fibril. In order for the Phe side chains to be uniformly displayed on one face of Ac-(FKFE)2-NH2 β-sheets, an antiparallel packing orientation in which one amino acid residue is unpaired must be adopted. Based on molecular models, we hypothesized that truncated seven amino acid derivatives of Ac-(FKFE)2-NH2 in which either the N-terminal Phe residue (Ac-KFEFKFE-NH2) or the C-terminal Glu residue (Ac-FKFEFKF-NH2) is eliminated should readily self-assemble into β-sheet bilayers in which all hydrogen bond and hydrophobic/charge interactions are satisfied. We found, however, that these minute changes in peptide sequence have unanticipated and dramatic effects on the self-assembly of each peptide. Ac-FKFEFKF-NH2 self-assembled into fibrils with unique morphology relative to the parent peptide, whereas the Ac-KFEFKFE-NH2 peptide had a strongly reduced propensity to self-assemble, even failing to self-assemble altogether under some conditions. These findings provide significant insight into the effect of sequence length and strand registry as well as hydrophobicity and charge on the self-assembly of simple amphipathic peptides to illuminate the possibility of tuning self-assembly processes and the resulting structures with minute changes to peptide sequence.

Modulating self-assembly behavior of a salt-free peptide amphiphile (PA) and zwitterionic surfactant mixed system

A salt-free surfactant system formed by a peptide amphiphile with short headgroup (PA,C16-GK-3) and a zwitterionic surfactant (dodecyldimethylamine oxide, C12DMAO) in water has been systematically investigated. The microstructures and properties of C16-GK-3/C12DMAO mixed system were characterized using a combination of microscopic, scattering and spectroscopic techniques, including transmission electron microscopy (TEM), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), Fourier transform infrared (FT-IR), circular dichroism (CD) and rheological measurements. Rich phase transitions have been observed by adjusting the concentration of C16-GK-3. Investigation of the hydrogels of C16-GK-3/C12DMAO with TEM, SEM and AFM showed that all of these hydrogels form nanobelts. The nanobelt formation is performed in a hierarchical manner: β-sheet peptides and C12DMAO first interact each other to form small aggregates, which then arrange themselves to form one dimensional (1D) left-handed ribbons. The ribbons further aggregated into flat and rigid nanobelts. We proposed a mechanism to interpret the self-assembly process according to the specific peptide structure as well as multiple equilibria between the hydrogen bonding interactions between the headgroups of C16-GK-3, between C12DMAO molecules and the headgroups of C16-GK-3, chirality of the amino acid residues and hydrophobic interactions of the alkyl chains.

Proteolytic stability of amphipathic peptide hydrogels composed of self-assembled pleated β-sheet or coassembled rippled β-sheet fibrils

Hydrogel networks composed of rippled β-sheet fibrils of coassembled D- and L-Ac-(FKFE)2-NH2 amphipathic peptides exhibit proteolytic stability and increased rheological strength compared to networks of self-assembled L-Ac-(FKFE)2-NH2 pleated β-sheet fibrils. Modifying the ratios of l and d peptides in the coassembled rippled β-sheet fibrils alters the degradation profiles of these hydrogel networks.

Autophagy in resin monomer-initiated toxicity of dental mesenchymal cells: a novel therapeutic target of N-acetyl cysteine

A proposed schematic model of autophagy involvement in resin monomer-initiated toxicity of dental mesenchymal cells and as a novel therapeutic target of NAC.

A stimulatory effect of Ca3ZrSi2O9 bioceramics on cementogenic/osteogenic differentiation of periodontal ligament cells

Ca₃ZrSi₂O₉ bioceramics promote the cementogenic/osteogenic differentiation of PDLCs.

Advances in regeneration of dental pulp--a literature review

This review summarizes the biological response of dentin-pulp complexes to a variety of stimuli and responses to current treatment therapies and reviews the role of tissue engineering and its application in regenerative endodontics. An electronic search was undertaken based on keywords using Medline/PubMed, Embase, Web of Science and Ovid database resources up to March 2012 to identify appropriate articles, supplemented by a manual search using reference lists from relevant articles. Inclusion criteria were mainly based on different combinations of keywords and restricted to articles published in English language only. Biological approaches based on tissue engineering principles were found to offer the possibility of restoring natural tooth vitality, with distinct evidence that regeneration of lost dental tissues is possible. Studies to formulate an ideal restorative material with regenerative properties, however, are still under way. Further research with supporting clinical studies is required to identify the most effective and safe treatment therapy.

Conformation and self-association of peptide amphiphiles based on the KTTKS collagen sequence

Studying peptide amphiphiles (PAs), we investigate the influence of alkyl chain length on the aggregation behavior of the collagen-derived peptide KTTKS with applications ranging from antiwrinkle cosmetic creams to potential uses in regenerative medicine. We have studied synthetic peptides amphiphiles C(14)-KTTKS (myristoyl-Lys-Thr-Thr-Lys-Ser) and C(18)-KTTKS (stearoyl-Lys-Thr-Thr-Lys-Ser) to investigate in detail their physicochemical properties. It is presumed that the hydrophobic chain in these self-assembling peptide amphiphiles enhances peptide permeation across the skin compared to KTTKS alone. Subsequently C(n)-KTTKS should act as a prodrug and release the peptide by enzymatic cleavage. Our results should be useful in the further development of molecules with collagen-stimulating activity.

Silk fibroin in tissue engineering

Tissue engineering (TE) is a multidisciplinary field that aims at the in vitro engineering of tissues and organs by integrating science and technology of cells, materials and biochemical factors. Mimicking the natural extracellular matrix is one of the critical and challenging technological barriers, for which scaffold engineering has become a prime focus of research within the field of TE. Amongst the variety of materials tested, silk fibroin (SF) is increasingly being recognized as a promising material for scaffold fabrication. Ease of processing, excellent biocompatibility, remarkable mechanical properties and tailorable degradability of SF has been explored for fabrication of various articles such as films, porous matrices, hydrogels, nonwoven mats, etc., and has been investigated for use in various TE applications, including bone, tendon, ligament, cartilage, skin, liver, trachea, nerve, cornea, eardrum, dental, bladder, etc. The current review extensively covers the progress made in the SF-based in vitro engineering and regeneration of various human tissues and identifies opportunities for further development of this field.

Drug delivery in soft tissue engineering

INTRODUCTION

Tissue defects, sustained through disease or trauma, present enormous challenges in regenerative medicine. Modern tissue engineering (TE) aims at replacing or repairing these defects through a combined approach of biodegradable scaffolds, suitable cell sources and appropriate environmental cues, such as biomolecules presented on scaffold surfaces or sustainably released from within.

AREAS COVERED

This review provides a brief overview of the various drugs and bioactive molecules of interest to TE, as well as a selection of materials that have been proposed for TE scaffolds and matrices in the past. It then proceeds to discuss encapsulation, immobilization and controlled release strategies for bioactive proteins, before discussing recent advances in this area with a special focus on soft TE.

EXPERT OPINION

Overall, minimal clinical success has been achieved so far in using growth factor, morphogen, or adhesion factor modified scaffolds and matrices; only one growth factor delivery system (Regranex Gel), has been approved by the FDA for clinical use, with only a handful of other growth factors being approved for human use so far. However, many more growth factors are currently in clinical Phase I - II or preclinical trials and many delivery systems utilize materials already approved by the FDA for other purposes. With respect to drug delivery in soft TE, a combination of increased research efforts in hydrogel and support material development as well as growth factor development is needed before clinical success is realized.