Converting drugs into gelators: supramolecular hydrogels from N-acetyl-L-cysteine and coinage-metal salts

Cysteine-Silver-Polymer Systems for the Preparation of Hydrogels and Films with Potential Applications in Regenerative Medicine

Herein, the problem concerning the poorer mechanical properties of gels based on low molecular weight gelators (LMWGs)-L-cysteine and silver nitrate-was solved by the addition of various polymers-polyvinyl alcohol (PVA), polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG)-to the initial cysteine-silver sol (CSS). The physicochemical methods of analysis-viscosimetry, UV spectroscopy, DLS, and SEM-identified that cysteine-silver hydrogels (CSG) based on PVA possess the best rheological properties and porous microstructure (the average pore size is 2-10 µm) compared to gels without the polymer or with PVP or PEG. Such gels are able to form cysteine-silver cryogels (CSC) and then porous cysteine-silver films (CSF) with an average pore size of 10-20 µm and good mechanical, swelling, and adhesion to skin characteristics as long as the structure of CSS particles remains stable. In vitro experiments have shown that hydrogels are non-toxic to normal human fibroblast cells. The obtained materials could potentially be applied to regenerative medicine.

Design and evaluation of molecular organogel based on folic acid as a potential green drug carrier for oral route

OBJECTIVE

The low molecular weight organogels are interesting carriers for pharmaceutical compounds. However, their uses are limited due to the toxicity burden of the organic solvent used. Hence, this study aimed to prepare organogel using folic acid (FA) in different concentrations as a gelator for propylene glycol (PG) biocompatible solvent.

METHODS

The simple mixing method followed by incubation in a water bath at 90 °C was used to prepare organogels. Then, formulations were assessed using different methods including differential scanning calorimetry (DSC), dropping method, attenuated total reflectance - Fourier transform infrared spectroscopy (ATR-FTIR), oscillatory rheology studies, scanning electron microscopy (SEM), and in vitro dissolution study.

RESULTS

Gel formation and its consistency were highly depending on FA concentration. The results showed that increasing the concentration of FA in the organogel led to accelerating the gelation process, and the least amount of FA that could gel the PG was 0.25% w/w. However, higher concentrations were needed to create an organogel with excellent properties. The DSC and dropping studies revealed stable organogels formulations at body temperature. The ATR-FTIR showed interactions between the pteridine ring of FA and PG. The strain amplitude and frequency sweep tests demonstrated an increase in storage modulus values as the concentration of FA increased at 37 °C, which were frequency independent at high frequencies. In addition, the SEM exposed the fabrics like the structure of these organogels. Furthermore, the in vitro dissolution of organogel was pH-dependent, with a high possibility of taking place in the large intestine.

CONCLUSION

FA/PG organogel formulation is a promising carrier for drug and nutraceuticals compound for the oral delivery system.

Reaction of N-Acetylcysteine with Cu2+: Appearance of Intermediates with High Free Radical Scavenging Activity: Implications for Anti-/Pro-Oxidant Properties of Thiols

We studied the kinetics of the reaction of N-acetyl-l-cysteine (NAC or RSH) with cupric ions at an equimolar ratio of the reactants in aqueous acid solution (pH 1.4−2) using UV/Vis absorption and circular dichroism (CD) spectroscopies. Cu2+ showed a strong catalytic effect on the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) radical (ABTSr) consumption and autoxidation of NAC. Difference spectra revealed the formation of intermediates with absorption maxima at 233 and 302 nm (ε302/Cu > 8 × 103 M−1 cm−1) and two positive Cotton effects centered at 284 and 302 nm. These intermediates accumulate during the first, O2-independent, phase of the NAC autoxidation. The autocatalytic production of another chiral intermediate, characterized by two positive Cotton effects at 280 and 333 nm and an intense negative one at 305 nm, was observed in the second reaction phase. The intermediates are rapidly oxidized by added ABTSr; otherwise, they are stable for hours in the reaction solution, undergoing a slow pH- and O2-dependent photosensitive decay. The kinetic and spectral data are consistent with proposed structures of the intermediates as disulfide-bridged dicopper(I) complexes of types cis-/trans-CuI2(RS)2(RSSR) and CuI2(RSSR)2. The electronic transitions observed in the UV/Vis and CD spectra are tentatively attributed to Cu(I) → disulfide charge transfer with an interaction of the transition dipole moments (exciton coupling). The catalytic activity of the intermediates as potential O2 activators via Cu(II) peroxo-complexes is discussed. A mechanism for autocatalytic oxidation of Cu(I)−thiolates promoted by a growing electronically coupled −[CuI2(RSSR)]n− polymer is suggested. The obtained results are in line with other reported observations regarding copper-catalyzed autoxidation of thiols and provide new insight into these complicated, not yet fully understood systems. The proposed hypotheses point to the importance of the Cu(I)−disulfide interaction, which may have a profound impact on biological systems.

Recent Updates on Supramolecular-Based Drug Delivery - Macrocycles and Supramolecular Gels

Supramolecules-based drug delivery has attracted significant recent research attention as it could enhance drug solubility, retention time, targeting, and stimuli responsiveness. Among the different supramolecules and assemblies, the macrocycles and the supramolecular hydrogels are the two important categories investigated to a greater extent. Here, we provide the most recent advancements in these categories. Under macrocycles, reports on drug delivery by cyclodextrins, cucurbiturils, calixarenes/pillararenes, crown ethers and porphyrins are detailed. The second category discusses the supramolecular hydrogels of macrocycles/polymers and low molecular weight gelators. The updated information provided could be helpful to advance R & D in this vital area.

L-Cysteine as a reducing/capping/gel-forming agent for the preparation of silver nanoparticle composites with anticancer properties

The present article reports the in situ preparation of silver nanoparticles (AgNPs) homogeneously distributed in the gel matrix formed using only L-cysteine (CYS) as a bio-reducing agent. The physicochemical methods of analysis confirmed the formation of a gel-network from aggregates consisting of spherical/elliptical cystine-stabilized AgNPs (core) and cysteine/Ag⁺ complexes (shell) regardless of the used silver salt - AgNO₃, AgNO₂ or AgOOCCH₃. CYS/AgNO₃ and CYS/AgOOCCH₃ aqueous solution systems needed the addition of electrolytes (Cl^- and SO₄^2-) for the gelation process, but the gel-formation in CYS/AgNO₂ occurred in one stage without any additional components. The AgNP sizes were about 1-5 nm in diameter for CYS/AgNO₃, 5-10 nm for CYS/AgOOCCH₃ and 20-40 nm for CYS/AgNO₂ systems. The zeta-potential values varied from +60 mV for CYS/AgNO₃ to +25 mV for the CYS/AgNO₂ system. The MTT-test showed that the obtained composites suppressed the MCF-7 breast cancer cells and the CYS/AgNO₃ system possessed the highest activity. Flow cytofluorimetry confirmed that the cell death occurred by apoptosis and this effect was the strongest for the CYS/AgNO₃ system. All systems were non-toxic to fibroblast cells. The novel simplest "green chemistry" approach, combining the knowledge of organic, inorganic, physical and supramolecular chemistry could open possibilities for the creation of the newest soft gel materials used in various fields of our life.

L-Cysteine/AgNO2 low molecular weight gelators: self-assembly and suppression of MCF-7 breast cancer cells

We report a new supramolecular hydrogel based on simple amino acids and silver salt compounds with low molecular weights. The in situ formation of silver nanoparticles during the self-assembly process endows the hydrogel with high cytotoxicity towards adenocarcinoma breast cells but no toxic effects towards embryonic fibroblasts.

N-Acetyl cysteine abrogates silver-induced reactive oxygen species in human cells without altering silver-based antimicrobial activity

Silver-based antimicrobials are widely used topically to treat infections associated with multi-drug resistant (MDR) pathogens. Expanding this topical use to aerosols to treat lung infections requires understanding and preventing silver toxicity in the respiratory tract. A key mechanism resulting in silver-induced toxicity is the production of reactive oxygen species (ROS). In this study, we have verified ROS generation in silver-treated bronchial epithelial cells prompting evaluation of three antioxidants, N-acetyl cysteine (NAC), ascorbic acid, and melatonin, to identify potential prophylactic agents. Among them, NAC was the only candidate that abrogated the ROS generation in response to silver acetate exposure resulting in the rescue of these cells from silver-associated toxicity. Further, this protective effect directly translated to preservation of metabolic activity, as demonstrated by the normal levels of citric acid cycle metabolites in NAC-pretreated silver acetate-exposed cells. Because the citric acid cycle remained functional, silver-exposed cells pre-incubated with NAC demonstrated significantly higher levels of adenosine triphosphate levels compared with NAC-free controls. Moreover, we found that this prodigious capacity of NAC to rescue silver acetate-exposed cells was due not only to its antioxidant activity, but also to its ability to directly bind silver. Despite binding to silver, NAC did not alter the antimicrobial activity of silver acetate.

Metallogels: Availability, Applicability, and Advanceability

Introducing metal components into gel matrices provides an effective strategy to develop soft materials with advantageous properties such as: optical activity, conductivity, magnetic response activity, self-healing activity, catalytic activity, etc. In this context, a thorough overview of application-oriented metallogels is provided. Considering that many well-established metallogels start from serendipitous discoveries, insights into the structure-gelation relationship will offer a profound impact on the development of metallogels. Initially, design strategies for discovering new metallogels are discussed, then the advanced applications of metallogels are summarized. Finally, perspectives regarding the design of metallogels, the potential applications of metallogels and their derivative materials are briefly proposed.

Release of small bioactive molecules from physical gels

Pharmaceutical drugs with low water solubility have always received great attention within the scientific community. The reduced bioavailability and the need of frequent administrations have motivated the investigation of new drug delivery systems. Within this context, drug carriers that release their payload in a sustained way and hence reduce the administration rate are highly demanded. One interesting strategy to meet these requirements is the entrapment of the drugs into gels. So far, the most investigated materials for such drug-loaded gels are derived from polymers and based on covalent linkages. However, over the last decade the use of physical (or supramolecular) gels derived from low molecular weight compounds has experienced strong growth in this field, mainly due to important properties such as injectability, stimuli responsiveness and ease of synthesis. This review summarizes the use of supramolecular gels for the encapsulation and controlled release of small therapeutic molecules.

Mechanism of gelation in low-concentration aqueous solutions of silver nitrate with l-cysteine and its derivatives

We discuss the results of experimental studies of the processes of gelation in aqueous solutions of silver nitrate with l-cysteine and its derivatives. We focus on understanding what determines if these small molecules will self-assemble in water at their extremely low concentration to form a gel. A mechanism of gel formation in a cysteine-silver solution (CSS) is proposed. The analysis of the results indicates that filamentary aggregates of a gel network are formed via interaction of NH₃⁺ and C(O)O^- groups that belong to neighboring silver mercaptide (SM) aggregates. In turn, formation of sulphur-silver bonds between silver mercaptide molecules is responsible for self-assembling these molecules into SM aggregates which can be considered as supramonomers. Free polar groups located on the surfaces of the aggregates can form hydrogen bonds with water molecules, which explains the unique ability of CSS hydrogels to trap water at low concentrations of low-molecular-weight hydrogelators.

Aggregation induced emission of gold(i) complexes in water or water mixtures

Gold(i) complexes are an expanding area of investigation due to the possibility of giving rise to supramolecular aggregates with particular morphologies that can be modulated together with their luminescent properties.

Entropy-Controlled Cu(II)-Catalyzed Oxidation of N-Acetyl-L-Cysteine by Methylene Blue in Acidic Medium

Kinetics of the oxidation of N-acetyl-L-cysteine (NAC) by methylene blue (MB) catalyzed by Cu(II) have been investigated in presence of HCl. The reaction follows a first order kinetics in MB while the concentration order in NAC is zero. Hydrogen ions retard the rate of reaction. The reaction involves the participation of nanoparticles as revealed by SEM, XRD and FTIR techniques and a gel-like Cu-NAC network acts like the effective catalyst. The reaction conforms to Eley-Rideal mechanism at lower [NAC] while at higher [NAC], the kinetics are explained by extended Eley-Rideal mechanism. The reaction is regulated by the size and morphology of the nanoparticles and is controlled by the entropy of activation.

PVA-reinforced glutathione–Ag hydrogels and release of Ag nanoparticles and drugs by UV-triggered controllable disassembly

Macromolecular chains of PVA efficiently supported the three-dimensional network structure of GSH–Ag gels, remarkably improving their thermal stability and mechanical strength and the controllable release of Ag NPs and drugs through UV-triggered gradual disassembly of GSH–Ag.

Metallogels through glyme coordination

Glyme coordinates to copper–thiolate polymers to significantly strengthen materials and provide tunable optical and mechanical properties.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Cysteine-Ag Cluster Hydrogel Confirmed by Experimental and Numerical Studies

The native cysteine (Cys)-Ag3 cluster hydrogel is approved for the first time by both experimental and theoretical studies. From the detailed molecular structure and energy information, three factors are found to ensure the self-assembly of Cys and Ag3 , and result in the hydrogel. First, the Ag-S bonds make Cys and Ag3 form Cys-Ag3 -Cys monomer. Second, intermolecular hydrogen bonds between carboxyl groups of adjacent monomer push them self-assembled. Third, more monomer precisely self-assemble to produce the -[Cys-Ag3 -Cys]n multimer, e.g., a single molecular chain with the left-handed helix conformation, via a benign thermodynamic process. These multimers entangle together to form micro-network to trap water and produce hydorgel in situ. The hydrogen bonds of hydrogel are sensitive to thermal and proton stimuli, and the hydrogel presents lysosome targeting properties via fluorescent imaging with biocompatibility.

Mechano-responsive gelation of water by a short alanine-derivative

We report the design of a structurally concise alanine derivative (Ala-hyd) that has a rotationally flexible aromatic N-protecting group for alanine and a hydrazide functionality at its carboxylic end. Ala-hyd requires mechanical agitation (physically stirring, vortexing or sonicating) to form supramolecular hydrogels at medium concentrations (0.4-0.8 wt%). At higher concentrations (>0.8 wt%), it spontaneously gelates water on undisturbed cooling of the hot solution, while at lower concentrations (<0.4 wt%), only turbid suspensions were formed upon agitation. In the <0.8 wt% regime, hydrogelation by Ala-hyd is modulated by its concentration as well as by the extent of applied mechanical agitation. Turbidimetry and fluorescence spectroscopy indicate enhanced self-assembly of Ala-hyd upon agitation, and FTIR studies point towards stronger hydrogen bonds in the resulting assemblies. Since Ala-hyd requires mechanical agitation to undergo self-assembly, its aqueous sols exhibited mild shear-thickening behaviour in buffered as well as salt-free conditions. During shearing, the formation of an entangled mesh of long, helical nanofibers coincided with the maximum in the bulk shear viscosity. pH-dependent rheological investigations indicate that protonation of the amine unit (pKa = 8.9) of hydrazide diminishes the self-assembly propensity of this compound. The self-assembly of Ala-hyd can thus be modulated through mechanical as well as chemical cues.

Supramolecular hydrogel of kanamycin selectively sequesters 16S rRNA

As the first example of hydrogelator derived from aminoglycoside antibiotics, the hydrogel of kanamycin indicates that the hydrogel of aminoglycosides preserve the specific interaction with their macromolecular targets (e.g., 16S rRNA), thus illustrating a simple approach to explore and identify possible biological targets of supramolecular nanofibers/hydrogels.

A self-assembled delivery platform with post-production tunable release rate

Self-assembly of three molecular components results in a delivery platform, the release rate of which can be tuned after its production. A fluorophore-conjugated gelator can be hydrolyzed by an enzyme, resulting in the release of a fluorescent small molecule. To allow the release to be tunable, the enzyme is entrapped in liposomes and can be liberated by heating the system for a short period. Crucially, the heating time determines the amount of enzyme liberated; with that, the release rate can be tuned by the time of heating.