Recent advances in electrochemical sensing for hydrogen peroxide: a review

A novel electrochemical strategy to detect hydrogen peroxide by utilizing peroxidase-mimicking activity of cerium oxide/graphene oxide nanocomposites

We herein describe a novel electrochemical strategy to detect hydrogen peroxide (H2O2) by utilizing the peroxidase-mimicking activity of cerium oxide nanoparticles (CeO2 NP) and reduced graphene oxide (rGO). Particularly, CeO2 NP/rGO nanocomposites were deposited on the commercial electrode by a very convenient and direct electrochemical reduction of graphene oxide. Due to the peroxidase-mimicking activity of CeO2 NP and the outstanding electrochemical properties of reduced graphene oxide, the reduction current of H2O2 was greatly enhanced. Based on this strategy, we reliably determined H2O2 down to 1.67 μM with excellent specificity and further validated its practical capabilities by robustly detecting H2O2 present in heterogeneous human serum samples. We believe that this work could serve as a new facile platform for H2O2 detection.

In Situ Performance Monitoring of Electrochemical Oxygen and Hydrogen Peroxide Sensors in an Additively Manufactured Modular Microreactor

Miniaturized and microstructured reactors in process engineering are essential for a more decentralized, flexible, sustainable, and resilient chemical production. Modern, additive manufacturing methods for metals enable complex reactor-geometries, increased functionality, and faster design iterations, a clear advantage over classical subtractive machining and polymer-based approaches. Integrated microsensors allow online, in situ process monitoring to optimize processes like the direct synthesis of hydrogen peroxide. We developed a modular tube-in-tube membrane reactor fabricated from stainless steel via 3D printing by laser powder bed fusion of metals (PBF-LB/M). The reactor concept enables the spatially separated dosage and resaturation of two gaseous reactants across a membrane into a liquid process medium. Uniquely, we integrated platinum-based electrochemical sensors for the online detection of analytes to reveal the dynamics inside the reactor. An advanced chronoamperometric protocol combined the simultaneous concentration measurement of hydrogen peroxide and oxygen with monitoring of the sensor performance and self-calibration in long-term use. We demonstrated the highly linear and sensitive monitoring of hydrogen peroxide and dissolved oxygen entering the liquid phase through the membrane. Our measurements delivered important real-time insights into the dynamics of the concentrations in the reactor, highlighting the power of electrochemical sensors applied in process engineering. We demonstrated the stable continuous measurement over 1 week and estimated the sensor lifetime for months in the acidic process medium. Our approach combines electrochemical sensors for process monitoring with advanced, additively manufactured stainless steel membrane microreactors, supporting the power of sensor-equipped microreactors as contributors to the paradigm change in process engineering and toward a greener chemistry.

Eco-friendly spark-generated CoxOy nanoparticle-modified graphite screen-printed sensing surfaces for the determination of H2O2 in energy drinks

The modification of graphite screen-printed electrodes (SPEs) is reported using an eco-friendly and extremely fast method based on the direct cobalt pin electrode-to-SPE spark discharge at ambient conditions. This approach does not utilize any liquids or chemical templates, does not produce any waste, and allows the in-situ generation of CoxOy nanoparticles onto the electrode surface and the development of efficient electrocatalytic sensing surfaces for the determination of H2O2. Co-spark SPEs were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy and x-ray photoelectron spectroscopy (XPS), revealing the formation of surface confined CoxOy nanoparticles and the diverse oxidation states of cobalt species. Co-spark SPEs were also characterized with cyclic voltammetry and electrochemical impedance spectroscopy. Redox transitions of the surface confined electrocatalysts are demonstrated by electrochemical polarization studies, showing the formation of different oxides (CoxOy), varying the XPS results. Amperometric measurements at 0.3 V vs. Ag/AgCl revealed a linear relationship between the current response and the concentration of H2O2 over the range 1 - 102 μM, achieving a limit of detection (3σ/m) of 0.6 μM. The interference effect of various electroactive species was effectively addressed by employing dual measurements in the absence and presence of the enzyme catalase. The analytical utility of the method was evaluated in antioxidant rich real-world samples, such as energy drinks, demonstrating sufficient recovery.

Recent Advances in Bimetallic Nanoporous Gold Electrodes for Electrochemical Sensing

Bimetallic nanocomposites and nanoparticles have received tremendous interest recently because they often exhibit better properties than single-component materials. Improved electron transfer rates and the synergistic interactions between individual metals are two of the most beneficial attributes of these materials. In this review, we focus on bimetallic nanoporous gold (NPG) because of its importance in the field of electrochemical sensing coupled with the ease with which it can be made. NPG is a particularly important scaffold because of its unique properties, including biofouling resistance and ease of modification. In this review, several different methods to synthesize NPG, along with varying modification approaches are described. These include the use of ternary alloys, immersion-reduction (chemical, electrochemical, hybrid), co-electrodeposition-annealing, and under-potential deposition coupled with surface-limited redox replacement of NPG with different metal nanoparticles (e.g., Pt, Cu, Pd, Ni, Co, Fe, etc.). The review also describes the importance of fully characterizing these bimetallic nanocomposites and critically analyzing their structure, surface morphology, surface composition, and application in electrochemical sensing of chemical and biochemical species. The authors attempt to highlight the most recent and advanced techniques for designing non-enzymatic bimetallic electrochemical nanosensors. The review opens up a window for readers to obtain detailed knowledge about the formation and structure of bimetallic electrodes and their applications in electrochemical sensing.

A Luminescence Assay in the Red for the Detection of Hydrogen Peroxide and Glucose Based on Metal Coordination Polyelectrolyte-Induced Supramolecular Self-Assembly of Alkynylplatinum(II) Complexes

A new sensing strategy towards hydrogen peroxide based on metal coordination polyelectrolyte-driven self-assembly of alkynylplatinum(II) 2,6-bis(benzimidazol-2'-yl)pyridine (bzimpy) complex was demonstrated. The cationic in situ-generated Ag(I)-thiocholine coordination polyelectrolytes were shown to induce the supramolecular self-assembly of anionic low-energy red-emissive alkynylplatinum(II) bzimpy complexes via non-covalent Pt(II)⋅⋅⋅Pt(II), electrostatic and π-π stacking interactions. The presence of hydrogen peroxide was shown to inhibit the formation of coordination polyelectrolytes and the coordination polyelectrolyte-induced self-assembly of platinum(II) complexes. The weakening of Pt(II)⋅⋅⋅Pt(II), electrostatic and π-π stacking interactions was supported by UV-vis absorption, emission, and resonance light scattering (RLS) studies. The present assay was also applied to probe glucose indirectly based on the enzymatic reaction of glucose oxidase on the substrate. Operating in a label-free manner, together with the low-energy red emission and large Stokes shift of alkynylplatinum(II) complexes, these features render the proposed design attractive for biological applications.

Sensitive detection of extracellular hydrogen peroxide using plasmon-enhanced electrochemical activity on Pd-tipped Au nanobipyramids

The fabrication of electroactive nanostructures with high electron concentration and specific electron transport is crucial for electrochemical sensing. In this study, a plasmon-enhanced electrochemical sensor has been developed for the detection of extracellular hydrogen peroxide (H2O2) from cancer cells, utilizing Pd-tipped Au nanobipyramids (PTA NBPs) as the electrocatalysts. Plasmonic PTA NBPs were synthesized by depositing Pd nanoparticles onto the tips of Au nanobipyramids (Au NBPs). Under excitation of localized surface plasmon resonance (LSPR), the PTA NBPs generate high-energy electron-hole pairs (e-/h+) on their surface. The generated electrons (e-) significantly enhance the electrochemical reduction of H2O2. Based on this, a plasmon-enhanced H2O2 electrochemical sensor is constructed with high sensitivity (986.57 μA mM-1 cm-2), low detection limit (0.02 μM), wide linear range (0.1 μM to 980 μM), and good stability and repeatability. Moreover, this sensor also enables the measurement of extracellular H2O2 derived from cancer cells (MCF-7), highlighting its potential applications in cellular biology and biomedical research.

An origami-based colorimetric sensor for detection of hydrogen peroxide and glucose using sericin capped silver nanoparticles

The hydrogen peroxide (H₂O₂) measurement is considered highly important in industrial wastewater quality assessment, environmental protection, and disease detection. Here, a simple high-performance paper-based sensor is proposed for rapid and in situ detection of H₂O₂. To this end, 3,3',5,5'-tetramethylbenzidine is embedded in the sensor to act as a color indicator, whose reaction with hydrogen peroxide is catalyzed by a silver nanozyme modified by sericin. The result of the reaction clarified by the appearance of blue color in the sensor detection zone is received by a portable scanner, while also calculating its intensity by image analysis software. This method is sensitive to hydrogen peroxide in the concentration range of 0.5‒240 mg/dL, providing a detection limit of 0.15 mg/dL. The ability of the sensor to determine glucose is also evaluated by adding a layer containing glucose oxidase enzyme to the sensor structure. A desirable response is obtained in the range of 1.0‒160 mg/dL, together with a detection limit of 0.37 mg/dL. Accordingly, the proposed sensor shows satisfactory results compared to clinical methods for monitoring the amount of glucose in biological samples such as serum and saliva.

Electrochemical monitoring of hydrogen peroxide by a signal-amplified microfluidic chip coupled with colloidal VO2 nanostructures as a peroxidase enzyme mimic

We present a novel electrochemical microfluidic device for the sensitive and selective detection of hydrogen peroxide (H₂O₂) through a VO₂ nanostructure enzyme mimic. The low-cost ($0.50) microfluidic chip was fabricated using a simple and rapid prototyping technique via three syringe needles. Each needle played the role of an electrode (working, reference, and counter), and was connected by micro-hoses to a construction of the electrochemical microfluidic chip. The colloidal VO₂ nanoflakes with peroxidase-like activity could be easily transferred on to the electrodes by a syringe, for development of a novel electrochemical platform to enable the detection of H₂O₂. The unique microfluidic electrochemical sensor delivered a wide linear dynamic range from 0.5 to 300 μM, with a limit of detection of 0.14 μM. The facile, rapid, sensitive, and selective as-fabricated H₂O₂ sensors were proven to be appropriate for the real-time monitoring of H₂O₂ released from PC12 cells. The integration of a microfluidic sensor with an enzyme mimic nanostructure is essentially a promising strategy for the low-cost and accurate monitoring of physiological processes.

Screen-Printable Functional Nanomaterials for Flexible and Wearable Single-Enzyme-Based Energy-Harvesting and Self-Powered Biosensing Devices

Developing flexible bioelectronics is essential to the realization of artificial intelligence devices and biomedical applications, such as wearables, but their potential is limited by sustainable energy supply. An enzymatic biofuel cell (BFC) is promising for power supply, but its use is limited by the challenges of incorporating multiple enzymes and rigid platforms. This paper shows the first example of screen-printable nanocomposite inks engineered for a single-enzyme-based energy-harvesting device and a self-powered biosensor driven by glucose on bioanode and biocathode. The anode ink is modified with naphthoquinone and multiwalled carbon nanotubes (MWCNTs), whereas the cathode ink is modified with Prussian blue/MWCNT hybrid before immobilizing with glucose oxidase. The flexible bioanode and the biocathode consume glucose. This BFC yields an open circuit voltage of 0.45 V and a maximum power density of 266 μW cm-2. The wearable device coupled with a wireless portable system can convert chemical energy into electric energy and detect glucose in artificial sweat. The self-powered sensor can detect glucose concentrations up to 10 mM. Common interfering substances, including lactate, uric acid, ascorbic acid, and creatinine, have no effect on this self-powered biosensor. Additionally, the device can endure multiple mechanical deformations. New advances in ink development and flexible platforms enable a wide range of applications, including on-body electronics, self-sustainable applications, and smart fabrics.

A Direct Catalytic Ethanol Fuel Cell (DCEFC) Modified by LDHs, or by Catalase-LDHs, and Improvement in Its Kinetic Performance: Applications for Human Saliva and Disinfectant Products for COVID-19

In this work, it has been experimentally proven that the kinetic performance of a common Direct Catalytic Ethanol Fuel Cell (DCEFC) can be increased by introducing nanostructured (Zn^II,Al^III(OH)₂)⁺NO₃^-·H₂O Layered Double Hydroxides (LDHs) into the anode compartment. Carrying out the measurements with the open-circuit voltage method and using a kinetic format, it has been shown that the introduction of LDHs in the anodic compartment implies a 1.3-fold increase in the calibration sensitivity of the method. This improvement becomes even greater in the presence of hydrogen peroxide in a solution. Furthermore, we show that the calibration sensitivity increased by 8-times, when the fuel cell is modified by the enzyme catalase, crosslinked on LDHs and in the presence of hydrogen peroxide. The fuel cell, thus modified (with or without enzyme), has been used for analytical applications on real samples, such as biological (human saliva) and hand disinfectant samples, commonly used for the prevention of COVID-19, obtaining very positive results from both analytical and kinetic points of view on ethanol detection. Moreover, if the increase in the calibration sensitivity is of great importance from the point of view of analytical applications, it must be remarked that the increase in the speed of the ethanol oxidation process in the fuel cell can also be extremely useful for the purposes of improving the energy performance of a DCEFC.

Improved Electrochemical Hydrogen Peroxide Detection Using a Nickel(II) Phthalimide-Substituted Porphyrazine Combined with Various Carbon Nanomaterials

A metal-free porphyrazine derivative with peripheral phthalimide substituents was metallated with a nickel(II) ion. The purity of the nickel macrocycle was confirmed using HPLC, and characterized by MS, UV-VIS, and 1D (¹H, ¹³C) and 2D (¹H-¹³C HSQC, ¹H-¹³C HMBC, ¹H-¹H COSY) NMR techniques. The novel porphyrazine was combined with various carbon nanomaterials, such as carbon nanotubes-single walled (SWCNTs) and multi-walled (MWCNTs), and electrochemically reduced graphene oxide (rGO), to create hybrid electroactive electrode materials. The carbon nanomaterials' effect on the electrocatalytic properties of nickel(II) cations was compared. As a result, an extensive electrochemical characterization of the synthesized metallated porphyrazine derivative on various carbon nanostructures was carried out using cyclic voltammetry (CV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). An electrode modified with carbon nanomaterials GC/MWCNTs, GC/SWCNTs, or GC/rGO, respectively, was shown to have a lower overpotential than a bare glassy carbon electrode (GC), allowing for the measurement of hydrogen peroxide in neutral conditions (pH 7.4). It was shown that among the tested carbon nanomaterials, the modified electrode GC/MWCNTs/Pz3 exhibited the best electrocatalytic properties in the direction of hydrogen peroxide oxidation/reduction. The prepared sensor was determined to enable a linear response to H₂O₂ in concentrations ranging between 20-1200 µM with the detection limit of 18.57 µM and sensitivity of 14.18 µA mM^-1 cm^-2. As a result of this research, the sensors produced here may find use in biomedical and environmental applications.

Heterostructure of Metal Oxides Integrated on a GCE for Estimation of H2O2 Capacity in Milk and Fruit Juice Samples

High levels of H2O2 in food can lead to oxidative stress. Which has been linked to a number of neurological diseases. Hence, its detection in beverages is essential. However, a complicated structure of the reaction medium of H2O2 makes the detection procedure very difficult. For this reason, sensitive strategic methods are required. In this study, quantification of H2O2 in milk and apple juice has been obtained via the electrochemical sensing platform based on GCE/SiO-CeONPs. Scanning Electron Microscopy (SEM), Cyclic voltammetry(CV), and electron impedance spectroscopy(EIS) were employed to characterize the composite. The kinetics investigation of the sensor with H2O2 revealed an a quasi-reversible one -electron adsorption process. Under optimized conditions, the Differential Pulse Voltammetry (DPV) in 0.1 M Phosphate buffer (PB) pH 5.5 of the H2O2 displayed a peak at 0.13 V vs. Ag/AgCl with the detection limits of 0.0004 µM, linearity range of 0.01–0.08 µM. The observed LOD values of this method for real samples were calculated to be 0.006 µM and 0.007 µM with LOQ of 0.02 µM for milk and apple juice, respectively. The recovery of the analyte was from 92 to 99%. Furthermore, due to good selectivity and stability, the benefit of this sensor is its applicability in multiple fields.

Single Printing Step Prussian Blue Bulk-Modified Transducers for Oxidase-Based Biosensors

We report on hydrogen peroxide sensors made through a single printing step with carbon ink containing catalytically synthesized Prussian blue nanoparticles. Despite their reduced sensitivity, the resulting bulk-modified sensors displayed both a wider linear calibration range (5 × 10^-7-1 × 10^-3 M) and an approximately four times lower detection limit versus the surface-modified sensors due to the dramatically decreased noise resulting in, on average, a six times higher signal-to-noise ratio. The corresponding glucose and lactate biosensors demonstrated similar and even higher sensitivities compared to those of biosensors based on surface-modified transducers. The biosensors have been validated through analysis of human serum. The decreased time and cost for production of single printing step bulk-modified transducers, as well as their analytical performance characteristics, which are advantageous over conventional surface-modified ones, would be expected to enable their wide use in (bio)sensorics.

Innovations in the synthesis of graphene nanostructures for bio and gas sensors

Sensors play a significant role in modern technologies and devices used in industries, hospitals, healthcare, nanotechnology, astronomy, and meteorology. Sensors based upon nanostructured materials have gained special attention due to their high sensitivity, precision accuracy, and feasibility. This review discusses the fabrication of graphene-based biosensors and gas sensors, which have highly efficient performance. Significant developments in the synthesis routes to fabricate graphene-based materials with improved structural and surface properties have boosted their utilization in sensing applications. The higher surface area, better conductivity, tunable structure, and atom-thick morphology of these hybrid materials have made them highly desirable for the fabrication of flexible and stable sensors. Many publications have reported various modification approaches to improve the selectivity of these materials. In the current work, a compact and informative review focusing on the most recent developments in graphene-based biosensors and gas sensors has been designed and delivered. The research community has provided a complete critical analysis of the most robust case studies from the latest fabrication routes to the most complex challenges. Some significant ideas and solutions have been proposed to overcome the limitations regarding the field of biosensors and hazardous gas sensors.

Electrodeposition of Silver Nanoparticles on Indium-Doped Tin Oxide Using Hydrogel Electrolyte for Hydrogen Peroxide Sensing

Nanoparticles are used in various fields, including fuel cells, energy conversion devices, and sensors, because of their large surface area and excellent catalytic properties. Although various methods of synthesizing nanoparticles are available, the most popular is the solution-phase reduction of metal ions. Electrodeposition is a method of reducing metal ions in solution and is widely used because of its various advantages. In this study, Ag nanoparticles with a narrow size distribution were evenly dispersed on the surface of an electrode by applying electrodeposition in an agarose hydrogel medium instead of in solution, confirming the feasibility of Ag deposition in agarose hydrogel, even at a lower reduction potential than that in solution. These results are attributed to the electrolyte effect owing to the hydrophilic backbone of the agarose hydrogel and the gel effect, which reduces unexpected convection. H₂O₂ was detected by using the Ag nanoparticles synthesized in agarose hydrogel, and the limit of detection for H₂O₂ was found to be 4.82 µM, with a dynamic range of 1-500 µM. The nanoparticle synthesis platform proposed in this study is expected to be actively used for the synthesis of other metal/nonmetal nanoparticles.

Novel Electrochemical Sensors Based on L-Proline Assisted LDH for H2O2 Determination in Healthy and Diabetic Urine

In this paper, a novel non-enzymatic modified glassy carbon (GC) sensor, of the (GC-Ag_paste)-catalytic proline-assisted LDH type, for H₂O₂ determination was fabricated, studied, characterized and employed to determine the hydrogen peroxide content in healthy and diabetic human urine. LDH (whose composition can be schematized as [Zn^IIAl^III (OH)₂]⁺ NO₃^-·nH₂O) is glued to glassy carbon by means of silver paste, while proline, which increases the catalytic properties of LDH, is used free in solution in the phosphate buffer. A voltametric survey was first conducted to ascertain the positive effect induced by the presence of proline, i.e., the increase of sensor sensitivity. Then a deep study of the new three-electrode amperometric proline-assisted LDH sensor, whose working electrode was of the same type as the one used to perform the cyclic voltammetry, was carried out, working at first in static air, then in a nitrogen atmosphere. Possible interferences from various substances, both oxidants and antioxidants, were also investigated. Lastly, the new amperometric sensor was successfully used to determine the H₂O₂ level in human urine from both healthy and diabetic subjects. The effect of proline in enhancing the properties of the sensor system was also investigated. The limit of detection (LOD) of the new catalytic sensor was of the order of 0.15 mmol L^-1, working in air, and of 0.05 µmol L^-1, working in nitrogen atmosphere.

Inorganic Nanoflowers—Synthetic Strategies and Physicochemical Properties for Biomedical Applications: A Review

Nanoflowers, which are flower-shaped nanomaterials, have attracted significant attention from scientists due to their unique morphologies, facile synthetic methods, and physicochemical properties such as a high surface-to-volume ratio, enhanced charge transfer and carrier immobility, and an increased surface reaction efficiency. Nanoflowers can be synthesized using inorganic or organic materials, or a combination of both (called a hybrid), and are mainly used for biomedical applications. Thus far, researchers have focused on hybrid nanoflowers and only a few studies on inorganic nanoflowers have been reported. For the first time in the literature, we have consolidated all the reports on the biomedical applications of inorganic nanoflowers in this review. Herein, we review some important inorganic nanoflowers, which have applications in antibacterial treatment, wound healing, combinatorial cancer therapy, drug delivery, and biosensors to detect diseased conditions such as diabetes, amyloidosis, and hydrogen peroxide poisoning. In addition, we discuss the recent advances in their biomedical applications and preparation methods. Finally, we provide a perspective on the current trends and potential future directions in nanoflower research. The development of inorganic nanoflowers for biomedical applications has been limited to date. Therefore, a diverse range of nanoflowers comprising inorganic elements and materials with composite structures must be synthesized using ecofriendly synthetic strategies.

Carbon microelectrodes with customized shapes for neurotransmitter detection: A review

Carbon is a popular electrode material for neurotransmitter detection due to its good electrochemical properties, high biocompatibility, and inert chemistry. Traditional carbon electrodes, such as carbon fibers, have smooth surfaces and fixed shapes. However, newer studies customize the shape and nanostructure the surface to enhance electrochemistry for different applications. In this review, we show how changing the structure of carbon electrodes with methods such as chemical vapor deposition (CVD), wet-etching, direct laser writing (DLW), and 3D printing leads to different electrochemical properties. The customized shapes include nanotips, complex 3D structures, porous structures, arrays, and flexible sensors with patterns. Nanostructuring enhances sensitivity and selectivity, depending on the carbon nanomaterial used. Carbon nanoparticle modifications enhance electron transfer kinetics and prevent fouling for neurochemicals that are easily polymerized. Porous electrodes trap analyte momentarily on the scale of an electrochemistry experiment, leading to thin layer electrochemical behavior that enhances secondary peaks from chemical reactions. Similar thin layer cell behavior is observed at cavity carbon nanopipette electrodes. Nanotip electrodes facilitate implantation closer to the synapse with reduced tissue damage. Carbon electrode arrays are used to measure from multiple neurotransmitter release sites simultaneously. Custom-shaped carbon electrodes are enabling new applications in neuroscience, such as distinguishing different catecholamines by secondary peaks, detection of vesicular release in single cells, and multi-region measurements in vivo.

Review of the Design of Ruthenium-Based Nanomaterials and Their Sensing Applications in Electrochemistry

In this review, ruthenium nanoparticles (Ru NPs)-based functional nanomaterials have attractive electrocatalytic characteristics and they offer considerable potential in a number of fields. Ru-based binary or multimetallic NPs are widely utilized for electrode modification because of their unique electrocatalytic properties, enhanced surface-area-to-volume ratio, and synergistic effect between two metals provides as an effective improved electrode sensor. This perspective review suggests the current research and development of Ru-based nanomaterials as a platform for electrochemical (EC) sensing of harmful substances, biomolecules, insecticides, pharmaceuticals, and environmental pollutants. The advantages and limitations of mono-, bi-, and multimetallic Ru-based nanocomposites for EC sensors are discussed. Besides, the relevant EC properties and analyte sensing approaches are also presented. On the basis of these insights, we highlighted recent results for synthesizing techniques and EC environmental pollutant sensors from the perspectives of diverse supports, including graphene, carbon nanotubes, silica, semiconductors, metal sulfides, and polymers. Finally, this work overviews the modern improvements in the utilization of Ru-based nanocomposites on the basis for electroanalytical sensors as well as suggestions for the field's future development.

Metal–Organic Frameworks for Electrocatalytic Sensing of Hydrogen Peroxide

The electrochemical detection of hydrogen peroxide (H₂O₂) has become more and more important in industrial production, daily life, biological process, green energy chemistry, and other fields (especially for the detection of low concentration of H₂O_2). Metal organic frameworks (MOFs) are promising candidates to replace the established H₂O₂ sensors based on precious metals or enzymes. This review summarizes recent advances in MOF-based H₂O₂ electrochemical sensors, including conductive MOFs, MOFs with chemical modifications, MOFs-composites, and MOF derivatives. Finally, the challenges and prospects for the optimization and design of H₂O₂ electrochemical sensors with ultra-low detection limit and long-life are presented.

Low-cost and rapid prototyping of integrated electrochemical microfluidic platforms using consumer-grade off-the-shelf tools and materials

We present a low-cost, accessible, and rapid fabrication process for electrochemical microfluidic sensors. This work leverages the accessibility of consumer-grade electronic craft cutters as the primary tool for patterning of sensor electrodes and microfluidic circuits, while commodity materials such as gold leaf, silver ink pen, double-sided tape, plastic transparency films, and fabric adhesives are used as its base structural materials. The device consists of three layers, the silver reference electrode layer at the top, the PET fluidic circuits in the middle and the gold sensing electrodes at the bottom. Separation of the silver reference electrode from the gold sensing electrodes reduces the possibility of cross-contamination during surface modification. A novel approach in mesoscale patterning of gold leaf electrodes can produce generic designs with dimensions as small as 250 μm. Silver electrodes with dimensions as small as 385 μm were drawn using a plotter and a silver ink pen, and fluid microchannels as small as 300 μm were fabricated using a sandwich of iron-on adhesives and PET. Device layers are then fused together using an office laminator. The integrated microfluidic electrochemical platform has electrode kinetics/performance of ΔE_p = 91.3 mV, I_pa/I_pc = 0.905, characterized by cyclic voltammetry using a standard ferrocyanide redox probe, and this was compared against a commercial screen-printed gold electrode (ΔE_p = 68.9 mV, I_pa/I_pc = 0.984). To validate the performance of the integrated microfluidic electrochemical platform, a catalytic hydrogen peroxide sensor and enzyme-coupled glucose biosensors were developed as demonstrators. Hydrogen peroxide quantitation achieves a limit of detection of 0.713 mM and sensitivity of 78.37 μA mM^-1 cm^-2, while glucose has a limit of detection of 0.111 mM and sensitivity of 12.68 μA mM^-1 cm^-2. This rapid process allows an iterative design-build-test cycle in under 2 hours. The upfront cost to set up the system is less than USD 520, with each device costing less than USD 0.12, making this manufacturing process suitable for low-resource laboratories or classroom settings.

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

A microfluidic organic transistor for reversible and real-time monitoring of H2O2 at ppb/ppt levels in ultrapure water

A microfluidic organic transistor functionalized with phenylboronic acid firstly succeeded in reversible and real-time monitoring of H₂O₂ at ppb/ppt levels in ultrapure water, which would be used not only as portable chemical sensors but also as monitoring tools to clarify unknown reaction mechanisms of phenylboronic acid with H₂O₂.

Prussian Blue/Carbon Nanotube Sensor Spread with Gelatin/Zein Glaze: A User-Friendly Modification for Stable Interference-Free H2O2 Amperometry

We report the production and characterization of effective amperometric sensors for cathodic hydrogen peroxide (H₂O₂) detection. The proposed electrodes involve a combination of a H₂O₂-signaling Prussian Blue (PB)/carbon nanotube (CNT) layer with a glaze of the biopolymers gelatin (top) and zein (beneath) for protection against PB leakage. The sandwich-type sensor was constructed through simple "drop and dry" steps with (1) suspensions of the CNTs in a soluble PB solution, (2) zein in ethanol, and (3) gelatin in water, applied sequentially to the carbon working electrode disk of a screen-printed carbon electrode (SPCE) platform. The PB in the signaling layer acted as the electrocatalyst for H₂O₂ reduction at -150 mV vs Ag/AgCl/3 M KCl, enabling cathodic H₂O₂ amperometry with good target proportionality. Calibration trials confirmed the linearity of the response up to 700 μM (R² > 0.998), with a sensitivity of 0.425 μA μM^-1 cm^-2 and a practical detection limit of 1 μM. Quantification of H₂O₂ in model and real samples with gelatin-zein-PB/CNT-SPCEs had a recovery of close to 100% of the true value. Since they are easily and cheaply made and yield accurate target assessments, gelatin-zein-PB/CNT-SPCEs are an ideal tool for electrochemical H₂O₂ analyses in human body fluids, health care products, and samples from industries that use H₂O₂ as a bleach and germicide. Workers with little experience in sensor fabrication and limited funding will particularly benefit from utilization of the proposed H₂O₂ probes, which as well as being used in H₂O₂ testing also have a potential application as the transducer unit of oxidase-based biosensors with amperometric H₂O₂ readout.

Ferrocene-Grafted Carbon Nanotubes for Sensitive Non-Enzymatic Electrochemical Detection of Hydrogen Peroxide

Sensitive detection of hydrogen peroxide (H₂O₂) residue in aseptic packaging at point of use is critical to food safety. We present a sensitive non-enzymatic, amperometric H₂O₂ sensor based on ferrocene-functionalized multi-walled carbon nanotubes (MWCNT-FeC) and facile screen-printed carbon electrodes (SPCEs). The sensor utilizes the covalently grafted ferrocene as an effective redox mediator and the MWCNT networks to provide a large active surface area for efficient electrocatalytic reactions. The electrocatalytic MWCNT-FeC modified electrodes feature a high-efficiency electron transfer and a high electrocatalytic activity towards H₂O₂ reduction at a low potential of -0.15 V vs. Ag/AgCl. The decreased operating potential improves the selectivity by inherently eliminating the cross-reactivity with other electroactive interferents, such as dopamine, glucose, and ascorbic acid. The sensor exhibits a wide linear detection range from 1 μM to 1 mM with a detection limit of 0.49 μM (S/N=3). The covalently functionalized electrodes offered highly reproducible and reliable detection, providing a robust property for continuous, real-time H₂O₂ monitoring. Furthermore, the proposed sensor was successfully employed to determine H₂O₂ levels in spiked packaged milk and apple juice with satisfactory recoveries (94.33-97.62%). The MWCNT-FeC modified SPCEs offered a facile, cost-effective method for highly sensitive and selective point-of-use detection of H₂O₂.

Wearable biosensors for real-time sweat analysis and body motion capture based on stretchable fiber-based triboelectric nanogenerators

Carbon neutrality is a global green energy revolution meaning that the carbon dioxide can make ends meet. However, with the mushroom of the fifth generation wireless systems (5G) and the Internet of Things (IoT), it is a great challenge for powering the ubiquitous distributed devices, because the battery production and high overhead maintenance may bring more carbon emissions. Here, we present wearable biosensors for real-time sweat analysis and body motion capture based on stretchable fiber-based triboelectric nanogenerators (F-TENG). The F-TENG is made of stretchable conductive fiber (Ecoflex coating with polyaniline (PANI)) and varnished wires. Based on the coupling effect of triboelectric effect and enzymatic reaction (surface-triboelectric coupling effect), the wearable biosensors can not only precisely sense the motion states, but also detect glucose, creatinine and lactate acid in sweat in real-time. Importantly, the wearable devices can self-drive without any external power source and the response against glucose, creatinine and lactate acid can be up to 103%, 125% and 38%, respectively. On this basis, applications in biosensing and wireless communication have been demonstrated. This work exhibits a prospective potential application of F-TENG in IoT for diverse use.

Self-Referenced Optical Fiber Sensor Based on LSPR Generated by Gold and Silver Nanoparticles Embedded in Layer-by-Layer Nanostructured Coatings

In this work, an optical fiber sensor based on the localized surface plasmon resonance (LSPR) phenomenon has been designed for the detection of two different chemical species (mercury and hydrogen peroxide) by using Layer-by-Layer Embedding (LbL-E) as a nanofabrication technique. In the first step, silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) have been synthesized by using a chemical protocol as a function of the strict control of three main parameters, which were polyelectrolyte concentration, a loading agent, and a reducing agent. In the second step, their incorporation into nanometric thin films have been demonstrated as a function of the number of bilayers, which shows two well-located absorption peaks associated to their LSPR in the visible region at 420 nm (AgNPs) and 530 nm (AuNPs). Finally, both plasmonic peaks provide a stable real-time reference measurement, which can be extracted from the spectral response of the optical fiber sensor, which shows a specific sensing mechanism as a function of the analyte of study.

Insight into OTFT Sensors Using Confocal Fluorescence Microscopy

Confocal fluorescence microscopy provides a means to map charge carrier density within the semiconductor layer in an active organic thin film transistor (OTFT). This method exploits the inverse relationship between charge carrier density and photoluminescence (PL) intensity in OTFTs, originating from exciton quenching following exciton-charge energy transfer. This work demonstrates that confocal microscopy can be a simple yet effective approach to gain insight into doping and de-doping processes in OTFT sensors. Specifically, the mechanisms of hydrogen peroxide sensitivity are studied in low-voltage hygroscopic insulator field effect transistors (HIFETs). While the sensitivity of HIFETs to hydrogen peroxide is well known, the underlying mechanisms remain poorly understood. Using confocal microscopy, new light is shed on these mechanisms. Two distinct doping processes are discerned: one that occurs throughout the semiconductor film, independent of applied voltages; and a stronger doping effect occurring near the source electrode, when acting as an anode with respect to a negatively polarized drain electrode. These insights offer important guidance to future studies and the optimization of HIFET-based sensors. More importantly, the methods reported here are broadly applicable to the study of a range of OTFT-based sensors. This work demonstrates that confocal microscopy can be an effective research tool in this field.

Colorimetric Detection of Extracellular Hydrogen Peroxide Using an Integrated Microfluidic Device

It is well known that hydrogen peroxide (H₂O₂) is a signaling molecule essential for vital physiological reactions in mammalian cells, such as cell survival, intercellular communication, and cancer metabolism. However, to fully understand the function of H₂O₂, it is critical to monitor its intracellular and/or extracellular concentrations. Current techniques implemented to address this need require large sample volumes, expensive instrumentation, and long sample preparation and analysis times, inapplicable to inline or online monitoring. In this paper, a new integrated microfluidic device capable of overcoming these limitations is demonstrated for the colorimetric detection of extracellular hydrogen peroxide H₂O₂. The device contains an optical waveguide to determine absorbance changes and micromixers to enable complete mixing of reagents using a passive approach. This novel H₂O₂-sensing device has allowed the detection of H₂O₂ in the range of 0.5-60 μM with a detection limit of 167 ± 5.8 nM and a sensitivity of 13.5 ± 0.1 AU/mM. Proof of concept of the device was demonstrated by quantifying H₂O₂ release from benign prostatic epithelial (BPH-1) cells upon stimulation with phorbol 12-myristate 13-acetate (PMA). Results show that this integrated device can be potentially utilized to continuously monitor cell-released metabolites autonomously without constant human supervision during the process. Furthermore, this can be achieved without interfering with the cell culture conditions, as only a very small volume of conditioned media (less than 0.4 μL), and not the cells, is required.

Hollow spheres of iron oxide as an “enzyme-mimic”: preparation, characterization and application as biosensors

Nanostructured hollow spheres of iron oxide are demonstrated as “nanozymes” for the dual mode (spectrophotometric and electrochemical) detection of hydrogen peroxide & cholesterol biomarkers and a novel electrochemical sensing mechanism is proposed.

Gas-Sensing Properties and Preparation of Waste Mask Fibers/ZnS Composites

To realize the resource utilization of waste mask fibers (MF), a layer of ZnS nanoparticles was grown on MF by a one-step hydrothermal method, and a MF/ZnS sensor was successfully prepared. This is the first time that resource utilization of MF has been combined with the development of a high-performance gas sensor. The MF/ZnS sensor showed high sensitivity and recoverability to target vapors at room temperature. Compared with ZnS powder loaded on a ceramic substrate, the MF/ZnS composite responses to four analytes have been improved by 8.4~35.2 times. In addition, the time for the MF/ZnS sensor to complete one response-recovery cycle for all four analytes was less than 30 s. This should be attributed to the high gas permeability of the MF substrate, which made the ZnS particles loaded on the MF more fully exposed to contact with the target vapors. This work not only provides a simple and low-cost method to optimize the sensing performance of gas sensors but also provides a new way for the resource utilization of MF.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11664-022-09644-1.

EDTA derived graphene supported porous cobalt hexacyanoferrate nanospheres as a highly electroactive nanocomposite for hydrogen peroxide sensing

Developed a highly electroactive graphene and porous cobalt hexacyanoferrate nanosphere (Gr/P-CoHCF-NSPs) composite for H2O2 sensing by using EDTA chelation strategy.

A graphene-printed paper electrode for determination of H2O2 in municipal wastewater during the COVID-19 pandemic

Graphene prepared through exfoliation process was printed on paper substrate using inkjet-printer and then printed paper electrode was used as an electrochemical sensor for analysis of H2O2 in cyclic voltammetry.

Expeditious base-free solid-state reaction between phenyl boronates and hydrogen peroxide on silica gel

The expeditious base-free reaction between a phenyl boronate film and H2O2 vapor can be realized on a silica gel surface, playing an important role in sensor manufacturing applications and chemical production.