Surface Functionalization with Polymer Brushes via Surface-Initiated Atom Transfer Radical Polymerization: Synthesis, Applications, and Current Challenges

Polymer brushes have received great attention in recent years due to their distinctive properties and wide range of applications. The synthesis of polymer brushes typically employs surface-initiated atom transfer radical polymerization (SI-ATRP) techniques. To realize the control of the polymerization process in different environments, various SI-ATRP techniques triggered by different stimuli have been developed. This review focuses on the latest developments in different stimuli-triggered SI-ATRP methods, such as electrochemically mediated, photoinduced, enzyme-assisted, mechanically controlled, and organocatalyzed ATRP. Additionally, SI-ATRP technology triggered by a combination of multiple stimuli sources is also discussed. Furthermore, the applications of polymer brushes in lubrication, biological applications, antifouling, and catalysis are also systematically summarized and discussed. Despite the advancements in the synthesis of various types of 1D, 2D, and 3D polymer brushes via controlled radical polymerization, contemporary challenges remain in the quest for more efficient and straightforward synthetic protocols that allow for precise control over the composition, structure, and functionality of polymer brushes. We anticipate the readers could promote the understanding of surface functionalization based on ATRP-mediated polymer brushes and envision future directions for their application in surface coating technologies.

A robust platform to construct molecular patchy particles with a pentiptycene skeleton toward controlled mesoscale structures

A new pentiptycene skeleton with orthogonally reactive sites and inherent D2h-symmetry to construct molecular pathy particles toward mesoscale structures.

Stanosilicates based on Sn-magadiites applied in conversion of fructose at moderate temperatures

Sn-Magadiite stanosilicates were successfully synthesized by the hydrothermal method.

Heparin Immobilized on Multiwalled Carbon Nanotubes for Catalytic Conversion of Fructose in Water with High Yield and Selectivity

Being a member of the glycosaminoglycan family of carbohydrates, native heparin is a highly sulfated polysaccharide. Herein, heparin was grafted onto polydopamine (PDA)- and poly(ethylene imine) (PEI)-coated multiwalled carbon nanotubes (MWCNTs) (heparin-PEI@PDA@MWCNT). The immobilized heparin consists of a sulfated repeating disaccharide unit, conferring a unique microenvironment when catalyzing fructose dehydration into 5-hydroxymethylfurfural (HMF). The hydrogen bonding interactions naturally occur between the disaccharide unit of heparin and the monosaccharide fructose, and the adjacent sulfonic acid groups catalyze the fructose dehydration. The reactions were performed in water, and heparin-PEI@PDA@MWCNT achieved an HMF yield of 46.2% and an HMF selectivity of 82.2%. For the dehydration of fructose in water, heparin-PEI@PDA@MWCNT exhibits advantages over published heterogeneous catalysts on the basis of HMF yield and HMF selectivity. Three aspects contribute to the environmentally benign processing: (1) the catalyst heparin is a natural sulfated polysaccharide; (2) the catalysis is carried out in water and not in organic solvents; and (3) fructose can be produced from a biomass resource.

Characterizing Polymer-Grafted Nanoparticles: From Basic Defining Parameters to Behavior in Solvents and Self-Assembled Structures

Polymer-grafted nanoparticles, often called hairy nanoparticles (HNPs), are an intriguing class of nanostructured hybrid materials with great potential in a variety of applications, including advanced polymer nanocomposite fabrication, drug delivery, imaging, and lubrication. This Feature provides an introduction to characterization of various aspects of HNPs, from basic defining parameters to behavior of HNPs in solvents and self-assembled structures of multicomponent brush nanoparticles, by using a broad range of analytical tools.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Enhancing the biofuel upgrade performance for Pd nanoparticles via increasing the support hydrophilicity of metal–organic frameworks

In this work, the influence of the hydrophilic/hydrophobic nature of metal–organic framework (MOF) materials on the catalytic performance of supported Pd nanoparticles for biofuel upgrade was studied. We show that the introduction of hydrophilic groups on a MOF can greatly enhance the performance of the resultant catalyst. Specifically, Pd nanoparticles supported on MIL-101–SO₃Na with superhydrophilicity (Pd/MIL-101–SO₃Na) far outperforms pristine MIL-101 and the benchmark catalyst Pd/C in the hydrodeoxygenation reaction of vanillin, a model component of pyrolysis oil derived from the lignin fraction. This is attributed to a favorable mode of adsorption of the highly water soluble reactants on the more hydrophilic support in the vicinity of the catalytically active Pd nanoparticles, thereby promoting their transformation.

Multicomponent synthesis of new curcumin-based pyrano[2,3-d]pyrimidine derivatives using a nano-magnetic solid acid catalyst

An novel nano-magnetic solid acid catalyst was used for the efficient synthesis of new curcumin-based pyrano[2,3-d]pyrimidine derivatives via a multicomponent reaction under mild conditions.

Heterogeneously Catalyzed Hydrothermal Processing of C5-C6 Sugars

Biomass has been long exploited as an anthropogenic energy source; however, the 21st century challenges of energy security and climate change are driving resurgence in its utilization both as a renewable alternative to fossil fuels and as a sustainable carbon feedstock for chemicals production. Deconstruction of cellulose and hemicellulose carbohydrate polymers into their constituent C₅ and C₆ sugars, and subsequent heterogeneously catalyzed transformations, offer the promise of unlocking diverse oxygenates such as furfural, 5-hydroxymethylfurfural, xylitol, sorbitol, mannitol, and gluconic acid as biorefinery platform chemicals. Here, we review recent advances in the design and development of catalysts and processes for C₅-C₆ sugar reforming into chemical intermediates and products, and highlight the challenges of aqueous phase operation and catalyst evaluation, in addition to process considerations such as solvent and reactor selection.

Electron-withdrawing ability tunable polyphosphazene frameworks as novel heterogeneous catalysts for efficient biomass upgrading

Novel polyphosphazene frameworks as green heterogeneous catalysts are discovered for efficient production of 5-HMF from fructose, which is due to the unique cyclotriphosphazene unit and the electron-withdrawing nature of the polymer backbone.

Integrated, cascading enzyme-/chemocatalytic cellulose conversion using catalysts based on mesoporous silica nanoparticles

This article reports a novel approach to deconstructing cellulose into 5-hydroxymethylfurfural (HMF) with a high yield (46.1%) by integrating a sequential enzyme cascade technique in an aqueous system with solid acid catalysis in an organic-solvent system. We executed the rational design and synthesis of mesoporous silica nanoparticles (MSNs) with various pore sizes and surface functionalities, which proved to be useful for the immobilization of various enzymes (i.e., cellulase and isomerase) and nanoparticles (i.e., magnetic Fe3 O4 ) and for functionalization of various acid groups (i.e., H2 PO3 , COOH, and SO3 H). We separately applied the synthesized biocatalysts (i.e., cellulase-Fe3 O4 @MSN and isomerase-Fe3 O4 @MSN) and chemical catalysts (i.e., HSO3 -MSN) in a sequential cellulose-to-glucose, glucose-to-fructose, and fructose-to-HMF conversion, respectively, across both aqueous- and organic-solvent systems after the optimization of reaction conditions (e.g., reaction temperature, water ratio, catalyst amount). The integrated enzymatic and chemocatalytic concept in this study could be an effective and economically friendly process for various catalytic applications.

Improved catalytic activity and stability using mixed sulfonic acid- and hydroxy-bearing polymer brushes in microreactors

Sulfonic acid-bearing polymer brushes were grown on the inner walls of continuous flow glass microreactors and used in the acid-catalyzed hydrolysis of benzaldehyde dimethyl acetal as a test reaction. Randomly 1:1 mixed polymer brushes of poly-3-sulfopropyl methacrylate (PSPM) and poly-2-hydroxyethyl methacrylate (PHEMA) showed a 6-fold increase of the TOF value compared to the solely PSPM-containing microreactor. This remarkable improvement is attributed to the cooperative stabilizing effect of proximal OH groups on the active sulfonic acid moieties within the brush architecture. In fact, the rational mixing of SPM with methyl methacrylate (MMA) as an OH-free comonomer caused a drop in the activity of the resulting catalytic platform. A 5-fold increase of the TON of the 1:1 PSPM-PHEMA versus the PSPM homopolymer brush systems additionally demonstrates the substantial increase in the stability of the mixed brushes catalytic platform, which could be continuously run over 7 days without significant loss of activity. The 1:1 PSPM-PHEMA mixed brush catalytic system also showed a good activity in the deprotection of 2-benzyl tetrahydropyranyl ether.

Three-phase catalytic system of H2O, ionic liquid, and VOPO4-SiO2 solid acid for conversion of fructose to 5-hydroxymethylfurfural

Efficient transformation of biomass-derived feedstocks to chemicals and fuels remains a daunting challenge in utilizing biomass as alternatives to fossil resources. A three-phase catalytic system, consisting of an aqueous phase, a hydrophobic ionic-liquid phase, and a solid-acid catalyst phase of nanostructured vanadium phosphate and mesostructured cellular foam (VPO-MCF), is developed for efficient conversion of biomass-derived fructose to 5-hydroxymethylfurfural (HMF). HMF is a promising, versatile building block for production of value-added chemicals and transportation fuels. The essence of this three-phase system lies in enabling the isolation of the solid-acid catalyst from the aqueous phase and regulation of its local environment by using a hydrophobic ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([BMIM][Tf2N]). This system significantly inhibits the side reactions of HMF with H2O and leads to 91 mol % selectivity to HMF at 89 % of fructose conversion. The unique three-phase catalytic system opens up an alternative avenue for making solid-acid catalyst systems with controlled and locally regulated microenvironment near catalytically active sites by using a hydrophobic ionic liquid.

Selective catalytic production of 5-hydroxymethylfurfural from glucose by adjusting catalyst wettability

The development of highly-efficient catalysts for conversion of glucose and fructose to 5-hydroxymethylfurfural (HMF) is of great importance. In this work, theoretical simulations form the basis for rational design and synthesis of a superhydrophobic mesoporous acid, that can completely prevent HMF hydration, giving HMF as sole product from full conversion of fructose. Interestingly, the combined superhydrophobic solid acid and superhydrophilic solid base catalysts are very efficient for one-pot conversion of glucose to HMF, giving a yield as high as 95.4 %. The excellent catalytic data in the conversion of glucose to HMF is attributed to the unique wettabilities of the solid acid and base catalysts.