Optical trapping of NaYF4:Er3+,Yb3+ upconverting fluorescent nanoparticles

Effect of the Photoexcitation Wavelength and Polarization on the Generated Heat by a Nd-Doped Microspinner at the Microscale

Thermal control at small scales is critical for studying temperature-dependent biological systems and microfluidic processes. Concerning this, optical trapping provides a contactless method to remotely study microsized heating sources. This work introduces a birefringent luminescent microparticle of NaLuF4:Nd3+ as a local heater in a liquid system. When optically trapped with a circularly polarized laser beam, the microparticle rotates and heating is induced through multiphonon relaxation of the Nd3+ ions. The temperature increment in the surrounding medium is investigated, reaching a maximum heating of ≈5 °C within a 30 µm radius around the static particle under 51 mW laser excitation at 790 nm. Surprisingly, this study reveals that the particle's rotation minimally affects the temperature distribution, contrary to the intuitive expectation of liquid stirring. The influence of the microparticle rotation on the reduction of heating transfer is analyzed. Numerical simulations confirm that the thermal distribution remains consistent regardless of spinning. Instead, the orientation-dependence of the luminescence process emerges as a key factor responsible for the reduction in heating. The anisotropy in particle absorption and the lag between the orientation of the particle and the laser polarization angle contribute to this effect. Therefore, caution must be exercised when employing spinning polarization-dependent luminescent particles for microscale thermal analysis using rotation dynamics.

Estimation of the proximal temperature rise of an excited upconversion particle by detecting the wavefront of emission

Monitoring the temperature distribution within a local environment at the micro and nanoscale is vital as many processes are solely thermal. Various thermometric techniques have been explored in the community, and out of these, fluorescent nano/micro particle-based mechanisms are accepted widely (fluorescence intensity ratio (FIR) techniques, where the ratio of populations in two consecutive energy levels is compared with Boltzmann distribution). We describe a new technique to account for the temperature rise near an illuminated upconverting particle (UCP) using wavefront imaging, which is more sensitive than the conventional thermometric techniques on the microscale. We rely on a thermo-optical phase microscopic technique by reconstructing the wavefront of emission from an upconverting particle using a Shack-Hartmann wavefront sensor. The wavefront maps the local phase distribution, which is an indicator of the surroundings' optical parameters, particularly the suspended medium's temperature-induced refractive index in the presence of convection currents. We describe how these extracted phase values can provide information about the optical heating due to the particle and hence its local environment along the direction of the emission. Our findings demonstrate the detection of a minimum temperature rise of 0.23 K, while the FIR methods indicate a minimum of 0.3 K rise. This technique is used to study the temperature increase in the backscattered direction for an upconverting particle illuminated on pump resonance. We also estimate the Soret coefficient for an upconverting particle optically trapped on pump resonance and experiencing anisotropic heating across the body.

Energy transfer between optically trapped single ligand-free upconversion nanoparticle and dye

The quenching in luminescence emission of an optically trapped ligand-free hydrophilic NaYF₄:Yb, Er upconversion nanoparticle (UCNP) as a function of rose Bengal dye molecule is investigated here. The removal of oleate capping of the as-prepared UCNPs was achieved via acid treatment and characterized via FTIR and Raman spectroscopic techniques. Further, the capping removed hydrophilic single UCNP is optically trapped and the emission studies were carried out as a function of excitation laser power. Compared to the studies using the bulk solution, the single UCNP luminescence spectrum exhibited additional spectral lines. The excitation laser power-dependent studies using the bulk solution yield a slope value between 1 and 2 for Blue, Green 1, Green 2, and Red emission and thus indicate that upconversion is a two-photon upconversion process. On the other hand, in the case of laser power-dependent studies on an optically trapped single-particle study, Blue and Green 1 yield a slope value of less than 1 whereas Green 2 and Red emission gave a slope value between 1 and 2. The energy transfer studies between an optically trapped ligand-free single UCNP and the rose Bengal dye show a concentration-dependent quenching in the emission of Green emissions and illustrate the potential of developing sensor platforms.

Spectroscopic characterization of rare events in colloidal particle stochastic thermodynamics

Given the remarkable developments in synthetic control over chemical and physical properties of colloidal particles, it is interesting to see how stochastic thermodynamics studies may be performed with new, surrogate, or hybrid model systems. In the present work, we apply stochastic dynamics and nonlinear optical light-matter interaction simulations to study nonequilibrium trajectories of individual Yb (III):Er (III) colloidal particles driven by two-dimensional dynamic optical traps. In addition, we characterize the role of fluctuations at the single-particle level by analyzing position trajectories and time-dependent upconversion emission intensities. By integrating these two complementary perspectives, we show how the methods developed here can be used to characterize rare events.

High-Sensitivity Sensing of Divalent Copper Ions at the Single Upconversion Nanoparticle Level

Single-nanoparticle-level sensing allows us to measure individual molecular interactions and probe environmental stimuli at nanometer-scale resolution. Despite these premises, limited success has been met hitherto due to the demanding challenge to distinguish a dimmed signal from a noisy background. Here, we describe an approach for high-sensitivity single-nanoparticle-level sensing of divalent copper (Cu²⁺) ions through near-infrared-to-visible upconversion luminescence against a near-null background. This nanosensor utilizes ytterbium- (Yb³⁺) and erbium (Er³⁺)-doped sodium yttrium fluoride (NaYF₄) upconversion nanoparticles (UCNPs) (maximal emission at 540 nm when excited at 980 nm) as an energy donor, of which the surface attaches Cu²⁺-dependent DNAzymes labeled with BHQ1 dye (Black Hole Quencher 1, maximal absorption at 548 nm) as energy acceptors. Adding a hint amount of Cu²⁺ ions resulted in the cleavage of a BHQ1-containing moiety in DNAzymes, thus turning on upconversion luminescence for sensitive detection. Indeed, this approach allows us to perform single-nanoparticle-level detection of Cu²⁺ ions with extraordinary signal-to-noise ratios (SNRs, >277) for all measured concentrations that cover 3 orders of magnitude (from sub-nM to μM). Importantly, a limit of detection of 220 pM was achieved, about sevenfold lower than the one at the ensemble level. Moreover, a stochastic particle-to-particle sensing behavior was also identified, featuring single-nanoparticle-level detection. This work untaps the usage of UCNPs for high-sensitivity single-nanoparticle-level biosensing.

Temperature Effects on Optical Trapping Stability

In recent years, optically trapped luminescent particles have emerged as a reliable probe for contactless thermal sensing because of the dependence of their luminescence on environmental conditions. Although the temperature effect in the optical trapping stability has not always been the object of study, the optical trapping of micro/nanoparticles above room temperature is hindered by disturbances caused by temperature increments of even a few degrees in the Brownian motion that may lead to the release of the particle from the trap. In this report, we summarize recent experimental results on thermal sensing experiments in which micro/nanoparticles are used as probes with the aim of providing the contemporary state of the art about temperature effects in the stability of potential trapping processes.

Optical tweezers beyond refractive index mismatch using highly doped upconversion nanoparticles

Optical tweezers are widely used in materials assembly¹, characterization², biomechanical force sensing^3,4 and the in vivo manipulation of cells⁵ and organs⁶. The trapping force has primarily been generated through the refractive index mismatch between a trapped object and its surrounding medium. This poses a fundamental challenge for the optical trapping of low-refractive-index nanoscale objects, including nanoparticles and intracellular organelles. Here, we report a technology that employs a resonance effect to enhance the permittivity and polarizability of nanocrystals, leading to enhanced optical trapping forces by orders of magnitude. This effectively bypasses the requirement of refractive index mismatch at the nanoscale. We show that under resonance conditions, highly doping lanthanide ions in NaYF₄ nanocrystals makes the real part of the Clausius-Mossotti factor approach its asymptotic limit, thereby achieving a maximum optical trap stiffness of 0.086 pN μm^-1 mW^-1 for 23.3-nm-radius low-refractive-index (1.46) nanoparticles, that is, more than 30 times stronger than the reported value for gold nanoparticles of the same size. Our results suggest a new potential of lanthanide doping for the optical control of the refractive index of nanomaterials, developing the optical force tag for the intracellular manipulation of organelles and integrating optical tweezers with temperature sensing and laser cooling⁷ capabilities.

Optical Manipulation of Lanthanide-Doped Nanoparticles: How to Overcome Their Limitations

Since Ashkin's pioneering work, optical tweezers have become an essential tool to immobilize and manipulate microscale and nanoscale objects. The use of optical tweezers is key for a variety of applications, including single-molecule spectroscopy, colloidal dynamics, tailored particle assembly, protein isolation, high-resolution surface studies, controlled investigation of biological processes, and surface-enhanced spectroscopy. In recent years, optical trapping of individual sub-100-nm objects has got the attention of the scientific community. In particular, the three-dimensional manipulation of single lanthanide-doped luminescent nanoparticles is of great interest due to the sensitivity of their luminescent properties to environmental conditions. Nevertheless, it is really challenging to trap and manipulate single lanthanide-doped nanoparticles due to the weak optical forces achieved with conventional optical trapping strategies. This limitation is caused, firstly, by the diffraction limit in the focusing of the trapping light and, secondly, by the Brownian motion of the trapped object. In this work, we summarize recent experimental approaches to increase the optical forces in the manipulation of lanthanide-doped nanoparticles, focusing our attention on their surface modification and providing a critical review of the state of the art and future prospects.

High-Resolution Photonic Force Microscopy Based on Sharp Nanofabricated Tips

Although near-field imaging techniques reach sub-nanometer resolution on rigid samples, it remains extremely challenging to image soft interfaces, such as biological membranes, due to the deformations induced by the probe. In photonic force microscopy, optical tweezers are used to manipulate and measure the scanning probe, allowing imaging of soft materials without force-induced artifacts. However, the size of the optically trapped probe still limits the maximum resolution. Here, we show a novel and simple nanofabrication protocol to massively produce optically trappable quartz particles which mimic the sharp tips of atomic force microscopy. Imaging rigid nanostructures with our tips, we resolve features smaller than 80 nm. Scanning the membrane of living malaria-infected red blood cells reveals, with no visible artifacts, submicron features termed knobs, related to the parasite activity. The use of nanoengineered particles in photonic force microscopy opens the way to imaging soft samples at high resolution.

Opto-thermoelectric pulling of light-absorbing particles

Optomechanics arises from the photon momentum and its exchange with low-dimensional objects. It is well known that optical radiation exerts pressure on objects, pushing them along the light path. However, optical pulling of an object against the light path is still a counter-intuitive phenomenon. Herein, we present a general concept of optical pulling-opto-thermoelectric pulling (OTEP)-where the optical heating of a light-absorbing particle using a simple plane wave can pull the particle itself against the light path. This irradiation orientation-directed pulling force imparts self-restoring behaviour to the particles, and three-dimensional (3D) trapping of single particles is achieved at an extremely low optical intensity of 10-2 mW μm-2. Moreover, the OTEP force can overcome the short trapping range of conventional optical tweezers and optically drive the particle flow up to a macroscopic distance. The concept of self-induced opto-thermomechanical coupling is paving the way towards freeform optofluidic technology and lab-on-a-chip devices.

Interface-Dependent Radiative Lifetimes of Yb3+, Er3+ Co-doped Single NaYF4 Upconversion Nanowires

The development of upconversion nanomaterials for many photonic applications requires a detailed understanding of their radiative lifetimes that in turn depend critically on local environmental conditions. In this work, hexagonal (β-phase) sodium-yttrium-fluoride (NaYF₄) nanowires (NWs) were synthesized and substitutionally co-doped with a luminescent solid solution of trivalent erbium and ytterbium ions. A single-beam laser trapping instrument was used in tandem with a piezo-controlled, variable-temperature stage to precisely vary the nanowire's distance from the substrate. The spontaneous photoluminescence lifetime of the ⁴S_3/2 → ⁴I_15/2 transition from Er³⁺ ions was observed to change by >60% depending on the ions' separation distance from a planar (water/glass) dielectric interface. The ⁴S_3/2 state lifetime is observed to increase by a factor of 1.62 ± 0.01 as the distance from the quartz coverslip increases from ∼0 nm to ∼40 μm. Less significant changes in the luminescence lifetime (≤10%) were observed over a temperature range between 25 and 50 °C. The distance dependence of the lifetime is interpreted quantitatively in the context of classical electromagnetic coupling between Er³⁺ ions within the nanowire and the adjacent dielectric interface. We also demonstrate potential applications of the NaYF₄ NWs for both controlling and probing temperatures at nanometer scales by integrating them within a poly(dimethylsiloxane) composite matrix.

Photoluminescence Activation of Organic Dyes via Optically Trapped Quantum Dots

Laser tweezers afford quantum dot (QD) manipulation for use as localized emitters. Here, we demonstrate fluorescence by radiative energy transfer from optically trapped colloidal QDs (donors) to fluorescent dyes (acceptors). To this end, we synthesized silica-coated QDs of different compositions and triggered their luminescence by simultaneous trapping and two-photon excitation in a microfluidic chamber filled with dyes. This strategy produces a near-field light source with great spatial maneuverability, which can be exploited to scan nanostructures. In this regard, we demonstrate induced photoluminescence of dye-labeled cells via optically trapped silica-coated colloidal QDs placed at their vicinity. Allocating nanoscale donors at controlled distances from a cell is an attractive concept in fluorescence microscopy because it dramatically reduces the number of excited dyes, which improves resolution by preventing interferences from the whole sample, while prolonging dye luminescence lifetime due to the lower power absorbed from the QDs.

Optical Management with Nanoparticles for a Light Conversion Efficiency Enhancement in Inorganic γ-CsPbI3 Solar Cells

Recently, γ-CsPbI₃ perovskite solar cells (PSCs) have shown potential applications in optoelectronic devices, due to their high thermal stability. However, the incomplete utilization of the solar spectra especially in the near-infrared (ca. 46%) range significantly limits the power conversion efficiency (PCE). Herein, core-shell-structured NaLuF₄:Yb,Er@NaLuF₄ upconversion nanoparticles (UCNPs) have been successfully synthesized and integrated into the hole transport layer for improving PCE in γ-CsPbI₃ PSCs. Compared with the reference one, the short-circuit current density ( J_SC) and PCE of the optimized device reached up to 19.17 mA/cm² (18.81 mA/cm²) and 15.86% (15.51%), respectively. Actually, due to the ultralow photoluminescence quantum yield (PLQY, < 1%) obtained in UCNPs now, we proved the generally recognized upconversion effect of UCNPs in solar cells (adjusting the light absorption edge from the visible toward NIR range for extending the spectral absorption) was negligible. A further study found the UCNPs in the PSCs primarily served as scattering centers, which is beneficial to extend the sunlight optical path by combining with scattering and reflecting sunlight, leading to producing more photoelectric current. This study suggests a new insight into understanding the underlying mechanism of UCNPs in the PSCs and provides a promising strategy via light scattering effect to enhance the device performance.

Impact of Lanthanide Nanomaterials on Photonic Devices and Smart Applications

Half a century after its initial emergence, lanthanide photonics is facing a profound remodeling induced by the upsurge of nanomaterials. Lanthanide-doped nanomaterials hold promise for bioapplications and photonic devices because they ally the unmatched advantages of lanthanide photophysical properties with those arising from large surface-to-volume ratios and quantum confinement that are typical of nanoobjects. Cutting-edge technologies and devices have recently arisen from this association and are in turn promoting nanophotonic materials as essential tools for a deeper understanding of biological mechanisms and related medical diagnosis and therapy, and as crucial building blocks for next-generation photonic devices. Here, the recent progress in the development of nanomaterials, nanotechnologies, and nanodevices for clinical uses and commercial exploitation is reviewed. The candidate nanomaterials with mature synthesis protocols and compelling optical uniqueness are surveyed. The specific fields that are directly driven by lanthanide doped nanomaterials are emphasized, spanning from in vivo imaging and theranostics, micro-/nanoscopic techniques, point-of-care medical testing, forensic fingerprints detection, to micro-LED devices.

The theoretical molecular weight of NaYF 4 :RE upconversion nanoparticles

Upconversion nanoparticles (UCNPs) are utilized extensively for biomedical imaging, sensing, and therapeutic applications, yet the molecular weight of UCNPs has not previously been reported. Herein, we present a theory based upon the crystal structure of UCNPs to estimate the molecular weight of UCNPs: enabling insight into UCNP molecular weight for the first time. We estimate the theoretical molecular weight of various UCNPs reported in the literature, predicting that spherical NaYF4 UCNPs ~ 10 nm in diameter will be ~1 MDa (i.e. 106 g/mol), whereas UCNPs ~ 45 nm in diameter will be ~100 MDa (i.e. 108 g/mol). We also predict that hexagonal crystal phase UCNPs will be of greater molecular weight than cubic crystal phase UCNPs. Additionally we find that a Gaussian UCNP diameter distribution will correspond to a lognormal UCNP molecular weight distribution. Our approach could potentially be generalised to predict the molecular weight of other arbitrary crystalline nanoparticles: as such, we provide stand-alone graphic user interfaces to calculate the molecular weight both UCNPs and arbitrary crystalline nanoparticles. We expect knowledge of UCNP molecular weight to be of wide utility in biomedical applications where reporting UCNP quantity in absolute numbers or molarity will be beneficial for inter-study comparison and repeatability.

Optical Forces at the Nanoscale: Size and Electrostatic Effects

The reduced magnitude of the optical trapping forces exerted over sub-200 nm dielectric nanoparticles complicates their optical manipulation, hindering the development of techniques and studies based on it. Improvement of trapping capabilities for such tiny objects requires a deep understanding of the mechanisms beneath them. Traditionally, the optical forces acting on dielectric nanoparticles have been only correlated with their volume, and the size has been traditionally identified as a key parameter. However, the most recently published research results have shown that the electrostatic characteristics of a sub-100 nm dielectric particle could also play a significant role. Indeed, at present it is not clear what optical forces depend. In this work, we designed a set of experiments in order to elucidate the different mechanism and properties (i.e., size and/or electrostatic properties) that governs the magnitude of optical forces. The comparison between experimental data and numerical simulations have shown that the double layer induced at nanoparticle's surface, not considered in the classical description of nanoparticle's polarizability, plays a relevant role determining the magnitude of the optical forces. Here, the presented results constitute the first step toward the development of the dielectric nanoparticle over which enhanced optical forces could be exerted, enabling their optical manipulation for multiples purposes ranging from fundamental to applied studies.

Integrating optical tweezers with up-converting luminescence: a non-amplification analytical platform for quantitative detection of microRNA-21 sequences

We report a single-microsphere based imaging assay for detecting microRNA-21 sequences with a detection limit of 12 fM.

Optical trapping for biosensing: materials and applications

Optical trapping has been evidence as a very powerful tool for the manipulation and study of biological entities. This review explains the main concepts regarding the use of optical trapping for biosensing, focusing its attention to those applications involving the manipulation of particles which are used as handles, force transducers and sensors.

Optical Torques on Upconverting Particles for Intracellular Microrheometry

Precise knowledge and control over the orientation of individual upconverting particles is extremely important for full exploiting their capabilities as multifunctional bioprobes for interdisciplinary applications. In this work, we report on how time-resolved, single particle polarized spectroscopy can be used to determine the orientation dynamics of a single upconverting particle when entering into an optical trap. Experimental results have unequivocally evidenced the existence of a unique stable configuration. Numerical simulations and simple numerical calculations have demonstrated that the dipole magnetic interactions between the upconverting particle and trapping radiation are the main mechanisms responsible of the optical torques that drive the upconverting particle to its stable orientation. Finally, how a proper analysis of the rotation dynamics of a single upconverting particle within an optical trap can provide valuable information about the properties of the medium in which it is suspended is demonstrated. A proof of concept is given in which the laser driven intracellular rotation of upconverting particles is used to successfully determine the intracellular dynamic viscosity by a passive and an active method.

Controlling and tracking of colloidal nanostructures through two-photon fluorescence

Multiphoton absorbing dye-coated trapped spherical bead at the focal plane of femtosecond optical tweezers shows nonlinear optical (NLO) phenomena. One such NLO process of two-photon fluorescence (TPF) has been used for the background-free imaging of a femtosecond laser-trapping event. Due to the high peak powers of femtosecond laser pulses with low average powers, it is possible to not only trap single nanospheres, but encourage optically directed self-assembly. The TPF signatures of trapped particles show evidence of such a directed self-assembly process which, in turn, can provide information about the structural dynamics during the process of cluster formation. We are able to trap and characterize structure and dynamics in 3D until pentamer formation from the decay characteristics of trapping at the focal plane.

Laser Refrigeration of Ytterbium-Doped Sodium-Yttrium-Fluoride Nanowires

Sodium yttrium fluoride (β-NaYF₄ ) nanowires (NWs) with a hexagonal crystal structure are synthesized using a low-cost hydrothermal process and are shown to undergo laser refrigeration based on an upconversion process leading to anti-Stokes (blueshifted) photoluminescence. Single-beam laser trapping combined with forward light scattering is used to investigate cryophotonic laser refrigeration of individual NWs through analysis of their local Brownian dynamics.

Coupling of transient near infrared photonic with magnetic nanoparticle for potential dissipation-free biomedical application in brain

Combined treatment strategies based on magnetic nanoparticles (MNPs) with near infrared ray (NIR) biophotonic possess tremendous potential for non-invasive therapeutic approach. Nonetheless, investigations in this direction have been limited to peripheral body region and little is known about the potential biomedical application of this approach for brain. Here we report that transient NIR exposure is dissipation-free and has no adverse effect on the viability and plasticity of major brain cells in the presence or absence superparamagnetic nanoparticles. The 808 nm NIR laser module with thermocouple was employed for functional studies upon NIR exposure to brain cells. Magnetic nanoparticles were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), dynamic laser scattering (DLS), and vibrating sample magnetometer (VSM). Brain cells viability and plasticity were analyzed using electric cell-substrate impedance sensing system, cytotoxicity evaluation, and confocal microscopy. When efficacious non-invasive photobiomodulation and neuro-therapeutical targeting and monitoring to brain remain a formidable task, the discovery of this dissipation-free, transient NIR photonic approach for brain cells possesses remarkable potential to add new dimension.

Photonic Torque Microscopy of the Nonconservative Force Field for Optically Trapped Silicon Nanowires

We measure, by photonic torque microscopy, the nonconservative rotational motion arising from the transverse components of the radiation pressure on optically trapped, ultrathin silicon nanowires. Unlike spherical particles, we find that nonconservative effects have a significant influence on the nanowire dynamics in the trap. We show that the extreme shape of the trapped nanowires yields a transverse component of the radiation pressure that results in an orbital rotation of the nanowire about the trap axis. We study the resulting motion as a function of optical power and nanowire length, discussing its size-scaling behavior. These shape-dependent nonconservative effects have implications for optical force calibration and optomechanics with levitated nonspherical particles.

Two-photon luminescence thermometry: towards 3D high-resolution thermal imaging of waveguides

We report on the use of the Erbium-based luminescence thermometry to realize high resolution, three dimensional thermal imaging of optical waveguides. Proof of concept is demonstrated in a 980-nm laser pumped ultrafast laser inscribed waveguide in Er:Yb phosphate glass. Multi-photon microscopy images revealed the existence of well confined intra-waveguide temperature increments as large as 200 °C for moderate 980-nm pump powers of 120 mW. Numerical simulations and experimental data reveal that thermal loading can be substantially reduced if pump events are separated more than the characteristic thermal time that for the waveguides investigated is in the ms time scale.

Thermal Scanning at the Cellular Level by an Optically Trapped Upconverting Fluorescent Particle

3D optical manipulation of a thermal-sensing upconverting particle allows for the determination of the extension of the thermal gradient created in the surroundings of a plasmonic-mediated photothermal-treated HeLa cancer cell.

Determining the 3D orientation of optically trapped upconverting nanorods by in situ single-particle polarized spectroscopy

An approach to unequivocally determine the three-dimensional orientation of optically manipulated NaYF4:Er(3+),Yb(3+) upconverting nanorods (UCNRs) is demonstrated. Long-term immobilization of individual UCNRs inside single and multiple resonant optical traps allow for stable single UCNR spectroscopy studies. Based on the strong polarization dependent upconverted luminescence of UCNRs it is possible to unequivocally determine, in real time, their three-dimensional orientation when optically trapped. In single-beam traps, polarized single particle spectroscopy has concluded that UCNRs orientate parallel to the propagation axis of the trapping beam. On the other hand, when multiple-beam optical tweezers are used, single particle polarization spectroscopy demonstrated how full spatial control over UCNR orientation can be achieved by changing the trap-to-trap distance as well as the relative orientation between optical traps. All these results show the possibility of real time three-dimensional manipulation and tracking of anisotropic nanoparticles with wide potential application in modern nanobiophotonics.

Laser refrigeration of hydrothermal nanocrystals in physiological media

Coherent laser radiation has enabled many scientific and technological breakthroughs including Bose-Einstein condensates, ultrafast spectroscopy, superresolution optical microscopy, photothermal therapy, and long-distance telecommunications. However, it has remained a challenge to refrigerate liquid media (including physiological buffers) during laser illumination due to significant background solvent absorption and the rapid (∼ ps) nonradiative vibrational relaxation of molecular electronic excited states. Here we demonstrate that single-beam laser trapping can be used to induce and quantify the local refrigeration of physiological media by >10 °C following the emission of photoluminescence from upconverting yttrium lithium fluoride (YLF) nanocrystals. A simple, low-cost hydrothermal approach is used to synthesize polycrystalline particles with sizes ranging from <200 nm to >1 μm. A tunable, near-infrared continuous-wave laser is used to optically trap individual YLF crystals with an irradiance on the order of 1 MW/cm(2). Heat is transported out of the crystal lattice (across the solid-liquid interface) by anti-Stokes (blue-shifted) photons following upconversion of Yb(3+) electronic excited states mediated by the absorption of optical phonons. Temperatures are quantified through analysis of the cold Brownian dynamics of individual nanocrystals in an inhomogeneous temperature field via forward light scattering in the back focal plane. The cold Brownian motion (CBM) analysis of individual YLF crystals indicates local cooling by >21 °C below ambient conditions in D2O, suggesting a range of potential future applications including single-molecule biophysics and integrated photonic, electronic, and microfluidic devices.

Assessing Single Upconverting Nanoparticle Luminescence by Optical Tweezers

We report on stable, long-term immobilization and localization of a single colloidal Er(3+)/Yb(3+) codoped upconverting fluorescent nanoparticle (UCNP) by optical trapping with a single infrared laser beam. Contrary to expectations, the single UCNP emission differs from that generated by an assembly of UCNPs. The experimental data reveal that the differences can be explained in terms of modulations caused by radiation-trapping, a phenomenon not considered before but that this work reveals to be of great relevance.

Enhancing optical forces on fluorescent up-converting nanoparticles by surface charge tailoring

3D remote control of multifunctional fluorescent up-converting nanoparticles (UCNPs) using optical forces is being required for a great variety of applications including single-particle spectroscopy, single-particle intracellular sensing, controlled and selective light-activated drug delivery and light control at the nanoscale. Most of these potential applications find a serious limitation in the reduced value of optical forces (tens of fN) acting on these nanoparticles, due to their reduced dimensions (typically around 10 nm). In this work, this limitation is faced and it is demonstrated that the magnitude of optical forces acting on UCNPs can be enhanced by more than one order of magnitude by a controlled modification of the particle/medium interface. In particular, substitution of cationic species at the surface by other species with higher mobility could lead to UCNPs trapping with constants comparable to those of spherical metallic nanoparticles.

Probing the nature of upconversion nanocrystals: instrumentation matters

Understanding upconversion nanocrystals: this review intends to summarize instrumental matters related to the characterization of upconversion nanocrystals from surface structures to intrinsic properties to ultimate challenges in nanocrystal analysis at single-particle levels.

Sub-diffraction positioning of a two-photon excited and optically trapped quantum dot

Colloidal quantum dots are luminescent long-lived probes that can be two-photon excited and manipulated by a single laser beam. Therefore, quantum dots can be used for simultaneous single molecule visualization and force manipulation using an infra-red laser. Here, we show that even a single optically trapped quantum dot, performing restricted Brownian motion within the focal volume, can be two-photon excited by the trapping laser beam and its luminescence can be detected by a camera. After two-photon excitation for a time long enough, the emitted light from the quantum dot is shown to blueshift. A quantum dot is much smaller than a diffraction limited laser focus and by mapping out the intensity of the focal volume and overlaying this with the positions visited by a quantum dot, a quantum dot is shown often to explore regions of the focal volume where the intensity is too low to render two-photon absorption likely. This is in accordance with the observation that a trapped quantum dot is only fluorescing 5-10 percent of the time. The results are important for realizing nano-scale quantum dot control and visualization and for correct interpretation of experiments using two-photon excited quantum dots as markers.