High mobility graphene ion-sensitive field-effect transistors by noncovalent functionalization

Active Micro-Nano-Collaborative Bioelectronic Device for Advanced Electrophysiological Recording

The development of precise and sensitive electrophysiological recording platforms holds the utmost importance for research in the fields of cardiology and neuroscience. In recent years, active micro/nano-bioelectronic devices have undergone significant advancements, thereby facilitating the study of electrophysiology. The distinctive configuration and exceptional functionality of these active micro-nano-collaborative bioelectronic devices offer the potential for the recording of high-fidelity action potential signals on a large scale. In this paper, we review three-dimensional active nano-transistors and planar active micro-transistors in terms of their applications in electro-excitable cells, focusing on the evaluation of the effects of active micro/nano-bioelectronic devices on electrophysiological signals. Looking forward to the possibilities, challenges, and wide prospects of active micro-nano-devices, we expect to advance their progress to satisfy the demands of theoretical investigations and medical implementations within the domains of cardiology and neuroscience research.

Protease detection in the biosensor era: A review

Proteases have been proposed as potential biomarkers for several pathological conditions including cancers, multiple sclerosis and cardiovascular diseases, due to their ability to break down the components of extracellular matrix and basement membrane. The development of protease biosensors opened up the possibility to investigate the proteolytic activity of dysregulated proteases with higher efficiency over the traditional detection assays due to their quick detection capability, high sensitivity and selectivity, simple instrumentation and cost-effective fabrication processes. In contrast to the recently published review papers that primarily focused on one specific class of proteases or one specific detection method, this review article presents different optical and electrochemical detection methods that can be used to design biosensors for all major protease families. The benefits and drawbacks of various transducer techniques integrated into protease biosensing platforms are analyzed and compared. The main focus is on activity-based biosensors that use peptides as biorecognition elements. The effects of nanomaterials on biosensor performance are also discussed. This review should help readers to select the biosensor that best fits their needs, and contribute to the further development of this research field. Protease biosensors may allow better comprehension of protease overexperession and potentially enable novel devices for point-of-care testing.

A sprayed graphene transistor platform for rapid and low-cost chemical sensing

We demonstrate a novel and versatile sensing platform, based on electrolyte-gated graphene field-effect transistors, for easy, low-cost and scalable production of chemical sensor test strips. The Lab-on-PCB platform is enabled by low-boiling, low-surface-tension sprayable graphene ink deposited on a substrate manufactured using a commercial printed circuit board process. We demonstrate the versatility of the platform by sensing pH and Na⁺ concentrations in an aqueous solution, achieving a sensitivity of 143 ± 4 μA per pH and 131 ± 5 μA per log₁₀Na⁺, respectively, in line with state-of-the-art graphene chemical sensing performance.

Recent Advances in Biosensor Technologies for Point-of-Care Urinalysis

Human urine samples are non-invasive, readily available, and contain several components that can provide useful indicators of the health status of patients. Hence, urine is a desirable and important template to aid in the diagnosis of common clinical conditions. Conventional methods such as dipstick tests, urine culture, and urine microscopy are commonly used for urinalysis. Among them, the dipstick test is undoubtedly the most popular owing to its ease of use, low cost, and quick response. Despite these advantages, the dipstick test has limitations in terms of sensitivity, selectivity, reusability, and quantitative evaluation of diseases. Various biosensor technologies give it the potential for being developed into point-of-care (POC) applications by overcoming these limitations of the dipstick test. Here, we present a review of the biosensor technologies available to identify urine-based biomarkers that are typically detected by the dipstick test and discuss the present limitations and challenges that future development for their translation into POC applications for urinalysis.

Dielectric-Modulated Biosensing with Ultrahigh-Frequency-Operated Graphene Field-Effect Transistors

Owing to their excellent electrical properties and chemical stability, graphene field-effect transistors (Gr-FET) are extensively studied for biosensing applications. However, hinging on surface interactions of charged biomolecules, the sensitivity of Gr-FET is hampered by ionic screening under physiological conditions with high salt concentrations up to frequencies as high as MHz. Here, an electrolyte-gated Gr-FET in reflectometry mode at ultrahigh frequencies (UHF, around 2 GHz), where the ionic screening is fully cancelled and the dielectric sensitivity of the device allows the Gr-FET to directly function in high-salt solutions, is configured. Strikingly, by simultaneous characterization using electrolyte gating and UHF reflectometry, the developed graphene biosensors offer unprecedented capability for real-time monitoring of dielectric-specified biomolecular/cell interactions/activities, with superior limit of detection compared to that of previously reported nanoscale high-frequency sensors. These achievements highlight the unique potential of ultrahigh-frequency operation for unblocking the true potential of graphene biosensors for point-of-care diagnostic.

Electrical detection of ppb region NO2 using Mg-porphyrin-modified graphene field-effect transistors

The trace detection of NO₂ through small sensors is essential for air quality measurement and the health field; however, small sensors based on electrical devices cannot detect NO₂ with the desired selectivity and quantitativity in the parts per billion (ppb) concentration region. In this study, we fabricated metalloporphyrin-modified graphene field-effect transistors (FETs). Mg-, Ni-, Cu-, and Co-porphyrins were deposited on the graphene FETs, and the transfer characteristics were measured. With the introduction of NO₂ in the ppb concentration region, the FETs of pristine graphene and Ni-, Cu-, and Co-porphyrin-modified graphene showed an insufficient response, whereas the Mg-porphyrin-modified graphene exhibited large voltage shifts in the transport characteristics. This indicates that Mg-porphyrin acts as an adsorption site for NO₂ molecules. An analysis of the Dirac-point voltage shifts with the introduction of NO₂ indicates that the shifts were well-fitted with the Langmuir adsorption isotherm model, and the limit of detection for NO₂ was found to be 0.3 ppb in N₂. The relationship between the mobility and the Dirac-point voltage shift with the NO₂ concentration shows that the complex of NO₂ and Mg-porphyrin behaves as a point-like charge impurity. Moreover, the Mg-porphyrin-modified graphene FETs show less response to other gases (O₂, H₂, acetic acid, trimethylamine, methanol, and hexane), thus indicating high sensitivity for NO₂ detection. Furthermore, we successfully demonstrated the quantitative detection of NO₂ in air, which is near the environmental standards. In conclusion, the results of the Mg-porphyrin-modified graphene FETs enable a rapid, easy, and selective detectability.

Electrical Detection of Molecular Transformations Associated with Chemical Reactions Using Graphene Devices

This study proposes a method to electrically detect chemical reactions that involve bond changes through reactions on graphene surfaces. To achieve a highly sensitive detection, we focused on the thiol-ene reaction that combines the maleimide and thiol groups. Graphene field-effect transistors (FETs) were used to detect the binding changes of the modified molecules. Graphene has high carrier mobility and is sensitive to changes in the electronic state of its surface. Graphene has been used as a sensor to detect low-concentration targets with high sensitivity. N-(9-Acridinyl)maleimide (NAM) was chosen as the modified molecule to immobilize maleimide on graphene through π-interaction, and methanethiol (MeSH) was set as the target thiol. The modification of NAM to graphene was first confirmed by attenuated total reflection Fourier transform infrared spectroscopy, and the modification density was 0.5 ± 0.1/nm² through cyclic voltammetry. Owing to a bond exchange, the transfer characteristics of the graphene FET shifted by 2 V to the negative direction after being exposed to MeSH at 10 parts per billion (ppb), equivalent to 0.2 ng, under ultraviolet irradiation. With 5000 ppb of acetic acid, it only shifted 0.7 V. With 1000 ppb of ethanol and 10,000 ppb of methanol, it shifted to the positive direction by 0.4 and 0.6 V, respectively. Because the nontarget molecule showed only a slight response, a thiol-ene chemical reaction was detected. The proposed method can detect the bond-change reaction using an ultralow concentration of MeSH, which indicates that at least 10 ppb (or 0.2 ng) of MeSH was detected by the graphene FET.

Two-Dimensional Disposable Graphene Sensor to Detect Na+ Ions

The monitoring of Na⁺ ions distributed in the body has been indirectly calculated by the detection of Na⁺ ions in urine. We fabricated a two–dimensional (2D) Na⁺ ion sensor using a graphene ion–sensitive field–effect transistor (G–ISFET) and used fluorinated graphene as a reference electrode (FG–RE). We integrated G–ISFET and FG on a printed circuit board (PCB) designed in the form of a secure digital (SD) card to fabricate a disposable Na⁺ ion sensor. The sensitivity of the PCB tip to Na⁺ ions was determined to be −55.4 mV/dec. The sensor exhibited good linearity despite the presence of interfering ions in the buffer solution. We expanded the evaluation of the PCB tip to real human patient urine samples. The PCB tip exhibited a sensitivity of −0.36 mV/mM and linearly detected Na⁺ ions in human patient urine without any dilution process. We expect that G–ISFET with FG–RE can be used to realize a disposable Na⁺ ion sensor by serving as an alternative to Ag/AgCl reference electrodes.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

Recent trends in analytical and digital techniques for the detection of the SARS-Cov-2

The current global outbreak of COVID-19 due to SARS-CoV-2 is an unprecedented humanitarian crisis. Considering the gravity of its impact there is an immediate need to develop a detection technique that is sensitive, specific, fast, and affordable for the clinical diagnosis of the disease. Real time Polymerase Chain Reaction (RT-PCR)-based detection platforms are contemplated to be the gold standard to detect viral RNA. However, that may be susceptible to errors, and there is a risk of obtaining false results, which ultimately compromises the strategy of efficient disease management. Several modern techniques exhibiting assured results with enhanced sensitivity and specificity against the SARS-CoV-2 associated viral components or immune response against it have been developed and may be implemented. The review deals with the conventional RT-PCR detection techniques and compares them to other detection platforms viz., biosensor based detection of antigens, fluorescent or colorimetric detection systems including CRISPR-Cas 13 based SHERLOCK kit, CRISPR Cas-9 based FELUDA test kit, CRISPR DETECTR kit, Next Generation Sequencing or microarray-based kits. These modern techniques are great as a point of care detection methods but should be followed by RT PCR based detection for the confirmation of COVID-19 status.

Super-Nernstian pH Sensor Based on Anomalous Charge Transfer Doping of Defect-Engineered Graphene

The conventional pH sensor based on the graphene ion-sensitive field-effect transistor (Gr-ISFET), which operates with an electrostatic gating at the solution-graphene interface, cannot have a pH sensitivity above the Nernst limit (∼59 mV/pH). However, for accurate detection of the pH levels of an aqueous solution, an ultrasensitive pH sensor that can exceed the theoretical limit is required. In this study, a novel Gr-ISFET-based pH sensor is fabricated using proton-permeable defect-engineered graphene. The nanocrystalline graphene (nc-Gr) with numerous grain boundaries allows protons to penetrate the graphene layer and interact with the underlying pH-dependent charge-transfer dopant layer. We analyze the pH sensitivity of nc-Gr ISFETs by adjusting the grain boundary density of graphene and the functional group (OH-, NH₂-, CH₃-) on the SiO₂ surface, confirming an unusual negative shift of the charge-neutral point (CNP) as the pH of the solution increases and a super-Nernstian pH response (approximately -140 mV/pH) under optimized conditions.

Selective ion sensing with high resolution large area graphene field effect transistor arrays

Real-time, high resolution, simultaneous measurement of multiple ionic species is challenging with existing chromatographic, spectrophotometric and potentiometric techniques. Potentiometric ion sensors exhibit limitations in both resolution and selectivity. Herein, we develop wafer scale graphene transistor technology for overcoming these limitations. Large area graphene is an ideal material for high resolution ion sensitive field effect transistors (ISFETs), while simultaneously enabling facile fabrication as compared to conventional semiconductors. We develop the ISFETs into an array and apply Nikolskii–Eisenman analysis to account for cross-sensitivity and thereby achieve high selectivity. We experimentally demonstrate real-time, simultaneous concentration measurement of K⁺, Na⁺, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\rm{NH}}}_{4}^{+}$$\end{document}NH4+, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\rm{NO}}}_{3}^{-}$$\end{document}NO3−, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\rm{SO}}}_{4}^{2-}$$\end{document}SO42−, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${{\rm{HPO}}}_{4}^{2-}$$\end{document}HPO42− and Cl⁻ with a resolution of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim\! 2\times 1{0}^{-3}\,{\mathrm{log}}\,$$\end{document}~2×10−3log concentration units. The array achieves an accuracy of  ±0.05 log concentration. Finally, we demonstrate real-time ion concentration measurement in an aquarium with lemnoideae lemna over three weeks, where mineral uptake by aquatic organisms can be observed during their growth.

The authors demonstrate wafer-scale, graphene-based ion sensitive field effect transistors arrays for simultaneous concentration measurement of K⁺, Na⁺, NH₄⁺, NO₃⁻, SO₄²⁻, HPO₄²⁻ and Cl⁻, and use their technology for real-time ion concentration measurements in an aquarium with lemnoideae lemna over a period of three weeks.

Solution-gated transistors of two-dimensional materials for chemical and biological sensors: status and challenges

Two-dimensional (2D) materials have been the focus of materials research for many years due to their unique fascinating properties and large specific surface area (SSA). They are very sensitive to the analytes (ions, glucose, DNA, protein, etc.), resulting in their wide-spread development in the field of sensing. New 2D materials, as the basis of applications, are constantly being fabricated and comprehensively studied. In a variety of sensing applications, the solution-gated transistor (SGT) is a promising biochemical sensing platform because it can work at low voltage in different electrolytes, which is ideal for monitoring body fluids in wearable electronics, e-skin, or implantable devices. However, there are still some key challenges, such as device stability and reproducibility, that must be faced in order to pave the way for the development of cost-effective, flexible, and transparent SGTs with 2D materials. In this review, the device preparation, device physics, and the latest application prospects of 2D materials-based SGTs are systematically presented. Besides, a bold perspective is also provided for the future development of these devices.

Ultrasensitive Field-Effect Biosensors Enabled by the Unique Electronic Properties of Graphene

This review provides a critical overview of current developments on nanoelectronic biochemical sensors based on graphene. Composed of a single layer of conjugated carbon atoms, graphene has outstanding high carrier mobility and low intrinsic electrical noise, but a chemically inert surface. Surface functionalization is therefore crucial to unravel graphene sensitivity and selectivity for the detection of targeted analytes. To achieve optimal performance of graphene transistors for biochemical sensing, the tuning of the graphene surface properties via surface functionalization and passivation is highlighted, as well as the tuning of its electrical operation by utilizing multifrequency ambipolar configuration and a high frequency measurement scheme to overcome the Debye screening to achieve low noise and highly sensitive detection. Potential applications and prospectives of ultrasensitive graphene electronic biochemical sensors ranging from environmental monitoring and food safety, healthcare and medical diagnosis, to life science research, are presented as well.

Function of Tetra (4-Aminophenyl) Porphyrin in Altering the Electronic Performances of Reduced Graphene Oxide-Based Field Effect Transistor

Porphyrin functionalized reduced graphene oxide (rGO) is attractive for multi-disciplinary research studies, and its improvements for an rGO-based field effect transistor (rGO-FET) were exploited to realize ultrasensitive biochemical and clinical assay. Although it was believed that the hybrids of porphyrin and rGO can make positive impacts on the rGO-FET’s electronic performances, the understandings of its functions are still piecemeal. Herein, the reduced mixtures of tetra (4-aminophenyl) porphyrin (TAP), GO (TAP-rGO), and the FET channeled by them are examined to throw a light on the possible approaches through which TAP affects rGO’s quality and its carrier mobilities. A TAP-caused game relationship is established by deliberating about the results of the intentionally altered experimental conditions, including TAP contents and the overmixing pretreatment. The p-type doping deduction for the right-shifted ambipolar transfer characteristic curves is evidenced by X-ray photoelectron spectroscopy (XPS). The problems posed by the TAP-induced FET features’ improvement, regression, and deterioration are clarified by the integrated proofs from Raman fingerprints, the amide and carboxyl groups’ changing trajectory found by C1s XPS core spectra, and the enlarged few-layer graphene morphology from atomic force microscope and transmission electron microscope. We hope that this effort will provide some constructive recommendations for producing low-cost graphene derivatives and promoting their applications in FET-like electronic components.

Ion Sensing with Solution-Gated Graphene Field-Effect Sensors in the Frequency Domain

Here, we examine the concept of frequency domain sensing with solution-gated graphene field-effect transistors, where a sine wave of primary frequency (1f) was applied at the gate and modulation of the power spectral density (PSD) of the drain-source current at 1f, 2f, and 3f was examined as the salt in the gate electrolyte was switched from KCl to CaCl₂, and their concentrations were varied. The PSD at 1f, 2f, and 3f increased with the concentration of KCl or CaCl₂, with the PSD at 1f being the most sensitive. We further correlated these changes to the shift in Dirac point. Switching the graphene substrate from oxide to hexagonal boron nitride, led to an improved device-to-device reproducibility and a significant reduction of noise, which translated to a higher signal-to-noise ratio and resolution in sensing salt concentrations. The signal-to-noise ratio at 1f was found to be a logarithmic function of KCl or CaCl₂ concentration in the 0.1 to 1000 mM range.

Reversible Switching of the Dirac Point in Graphene Field-Effect Transistors Functionalized with Responsive Polymer Brushes

The reversible control of the graphene Dirac point using external chemical stimuli is of major interest in the development of advanced electronic devices such as sensors and smart logic gates. Here, we report the coupling of chemoresponsive polymer brushes to reduced graphene oxide (rGO)-based field-effect transistors to modulate the graphene Dirac point in the presence of specific divalent cations. Poly[2-(methacryloyloxy)ethyl] phosphate (PMEP) brushes were grown on the transistor channel by atom transfer radical polymerization initiated from amine-pyrene linkers noncovalently attached to rGO surfaces. Our results show an increase in the Dirac point voltage due to electrostatic gating effects upon the specific binding of Ca²⁺ and Mg²⁺ to the PMEP brushes. We demonstrate that the electrostatic gating is reversibly controlled by the charge density of the polymer brushes, which depends on the divalent cation concentration. Moreover, a theoretical formalism based on the Grahame equation and a Langmuir-type binding isotherm is presented to obtain the PMEP-cation association constant from the experimental data.

Free radical sensors based on inner-cutting graphene field-effect transistors

Due to ultra-high reactivity, direct determination of free radicals, especially hydroxyl radical (•OH) with ultra-short lifetime, by field-effect transistor (FET) sensors remains a challenge, which hampers evaluating the role that free radical plays in physiological and pathological processes. Here, we develop a •OH FET sensor with a graphene channel functionalized by metal ion indicators. At the electrolyte/graphene interface, highly reactive •OH cuts the cysteamine to release the metal ions, resulting in surface charge de-doping and a current response. By this inner-cutting strategy, the •OH is selectively detected with a concentration down to 10⁻⁹ M. Quantitative metal ion doping enables modulation of the device sensitivity and a quasi-quantitative detection of •OH generated in aqueous solution or from living cells. Owing to its high sensitivity, selectivity, real-time label-free response, capability for quasi-quantitative detection and user-friendly portable feature, it is valuable in biological research, human health, environmental monitoring, etc.

Field effect transistors based on graphene hold promise for future sensing applications. Here, the authors report a free radical sensor in which the •OH radical cuts cysteamine to release Cd²⁺ from the electrolyte/graphene interface and selectively detects •OH with a concentration down to 10⁻⁹ M.

Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials

Electrically-transduced sensors, with their simplicity and compatibility with standard electronic technologies, produce signals that can be efficiently acquired, processed, stored, and analyzed. Two dimensional (2D) nanomaterials, including graphene, phosphorene (BP), transition metal dichalcogenides (TMDCs), and others, have proven to be attractive for the fabrication of high-performance electrically-transduced chemical sensors due to their remarkable electronic and physical properties originating from their 2D structure. This review highlights the advances in electrically-transduced chemical sensing that rely on 2D materials. The structural components of such sensors are described, and the underlying operating principles for different types of architectures are discussed. The structural features, electronic properties, and surface chemistry of 2D nanostructures that dictate their sensing performance are reviewed. Key advances in the application of 2D materials, from both a historical and analytical perspective, are summarized for four different groups of analytes: gases, volatile compounds, ions, and biomolecules. The sensing performance is discussed in the context of the molecular design, structure-property relationships, and device fabrication technology. The outlook of challenges and opportunities for 2D nanomaterials for the future development of electrically-transduced sensors is also presented.

High-sensitivity ion detection at low voltages with current-driven organic electrochemical transistors

Ions dissolved in aqueous media play a fundamental role in plants, animals, and humans. Therefore, the in situ quantification of the ion concentration in aqueous media is gathering relevant interest in several fields including biomedical diagnostics, environmental monitoring, healthcare products, water and food test and control, agriculture industry and security. The fundamental limitation of the state-of-art transistor-based approaches is the intrinsic trade-off between sensitivity, ion concentration range and operating voltage. Here we show a current-driven configuration based on organic electrochemical transistors that overcomes this fundamental limit. The measured ion sensitivity exceeds by one order of magnitude the Nernst limit at an operating voltage of few hundred millivolts. The ion sensitivity normalized to the supply voltage is larger than 1200 mV V⁻¹ dec⁻¹, which is the largest value ever reported for ion-sensitive transistors. The proposed approach is general and can be extended to any transistor technology, thus opening opportunities for high-performance bioelectronics.

The organic electrochemical transistor is a type of transistor that modulates the channel current by the ion concentration and is thus explored for bio-applications. Here Ghittorelli et al. show a current-driven device configuration to increase the sensitivity by ten times than conventional approaches.

Dynamic Tunneling Junctions at the Atomic Intersection of Two Twisted Graphene Edges

The investigation of the transport properties of single molecules by flowing tunneling currents across extremely narrow gaps is relevant for challenges as diverse as the development of molecular electronics and sequencing of DNA. The achievement of well-defined electrode architectures remains a technical challenge, especially due to the necessity of high precision fabrication processes and the chemical instability of most bulk metals. Here, we illustrate a continuously adjustable tunneling junction between the edges of two twisted graphene sheets. The unique property of the graphene electrodes is that the sheets are rigidly supported all the way to the atomic edge. By analyzing the tunneling current characteristics, we also demonstrate that the spacing across the gap junction can be controllably adjusted. Finally, we demonstrate the transition from the tunneling regime to contact and the formation of an atomic-sized junction between the two edges of graphene.

Quantum and electrochemical interplays in hydrogenated graphene

The design of electrochemically gated graphene field-effect transistors for detecting charged species in real time, greatly depends on our ability to understand and maintain a low level of electrochemical current. Here, we exploit the interplay between the electrical in-plane transport and the electrochemical activity of graphene. We found that the addition of one H-sp³ defect per hundred thousand carbon atoms reduces the electron transfer rate of the graphene basal plane by more than five times while preserving its excellent carrier mobility. Remarkably, the quantum capacitance provides insight into the changes of the electronic structure of graphene upon hydrogenation, which predicts well the suppression of the electrochemical activity based on the non-adiabatic theory of electron transfer. Thus, our work unravels the interplay between the quantum transport and electrochemical kinetics of graphene and suggests hydrogenated graphene as a potent material for sensing applications with performances going beyond previously reported graphene transistor-based sensors.

Electrochemically-gated graphene field-effect transistors show promise for sensing of charged species in real time. Here, the authors leverage the interplay between electrical in-plane transport and electrochemical activity to explore the sensing performance of hydrogenated graphene.

Chemical sensing with 2D materials

During the last decade, two-dimensional materials (2DMs) have attracted great attention due to their unique chemical and physical properties, which make them appealing platforms for diverse applications in sensing of gas, metal ions as well as relevant chemical entities.

Pulse-Driven Capacitive Lead Ion Detection with Reduced Graphene Oxide Field-Effect Transistor Integrated with an Analyzing Device for Rapid Water Quality Monitoring

Rapid and real-time detection of heavy metals in water with a portable microsystem is a growing demand in the field of environmental monitoring, food safety, and future cyber-physical infrastructure. Here, we report a novel ultrasensitive pulse-driven capacitance-based lead ion sensor using self-assembled graphene oxide (GO) monolayer deposition strategy to recognize the heavy metal ions in water. The overall field-effect transistor (FET) structure consists of a thermally reduced graphene oxide (rGO) channel with a thin layer of Al₂O₃ passivation as a top gate combined with sputtered gold nanoparticles that link with the glutathione (GSH) probe to attract Pb²⁺ ions in water. Using a preprogrammed microcontroller, chemo-capacitance based detection of lead ions has been demonstrated with this FET sensor. With a rapid response (∼1-2 s) and negligible signal drift, a limit of detection (LOD) < 1 ppb and excellent selectivity (with a sensitivity to lead ions 1 order of magnitude higher than that of interfering ions) can be achieved for Pb²⁺ measurements. The overall assay time (∼10 s) for background water stabilization followed by lead ion testing and calculation is much shorter than common FET resistance/current measurements (∼minutes) and other conventional methods, such as optical and inductively coupled plasma methods (∼hours). An approximate linear operational range (5-20 ppb) around 15 ppb (the maximum contaminant limit by US Environmental Protection Agency (EPA) for lead in drinking water) makes it especially suitable for drinking water quality monitoring. The validity of the pulse method is confirmed by quantifying Pb²⁺ in various real water samples such as tap, lake, and river water with an accuracy ∼75%. This capacitance measurement strategy is promising and can be readily extended to various FET-based sensor devices for other targets.

Sensing at the Surface of Graphene Field-Effect Transistors

Recent research trends now offer new opportunities for developing the next generations of label-free biochemical sensors using graphene and other two-dimensional materials. While the physics of graphene transistors operated in electrolyte is well grounded, important chemical challenges still remain to be addressed, namely the impact of the chemical functionalizations of graphene on the key electrical parameters and the sensing performances. In fact, graphene - at least ideal graphene - is highly chemically inert. The functionalizations and chemical alterations of the graphene surface - both covalently and non-covalently - are crucial steps that define the sensitivity of graphene. The presence, reactivity, adsorption of gas and ions, proteins, DNA, cells and tissues on graphene have been successfully monitored with graphene. This review aims to unify most of the work done so far on biochemical sensing at the surface of a (chemically functionalized) graphene field-effect transistor and the challenges that lie ahead. The authors are convinced that graphene biochemical sensors hold great promise to meet the ever-increasing demand for sensitivity, especially looking at the recent progresses suggesting that the obstacle of Debye screening can be overcome.

Investigation of the surface plasmon polariton and electrochemical properties of covalent and non-covalent functionalized reduced graphene oxide

Non-covalent functionalized rGO showed superior plasmonic response and high donor density through a large frequency range at the electrode–electrolyte interface.

Two-dimensional nanomaterial-based field-effect transistors for chemical and biological sensing

This review highlights the recent progress in graphene-, 2D transition metal dichalcogenide-, and 2D black phosphorus-based FET sensors for detecting gases, biomolecules, and water contaminants.

Molecular Caging of Graphene with Cyclohexane: Transfer and Electrical Transport

Transfer of large, clean, crack- and fold-free graphene sheets is a critical challenge in the field of graphene-based electronic devices. Polymers, conventionally used for transferring two-dimensional materials, irreversibly adsorb yielding a range of unwanted chemical functions and contaminations on the surface. An oil-water interface represents an ideal support for graphene. Cyclohexane, the oil phase, protects graphene from mechanical deformation and minimizes vibrations of the water surface. Remarkably, cyclohexane solidifies at 7 °C forming a plastic crystal phase molecularly conforming graphene, preventing the use of polymers, and thus drastically limiting contamination. Graphene floating at the cyclohexane/water interface exhibits improved electrical performances allowing for new possibilities of in situ, flexible sensor devices at a water interface.

Simple Interface Engineering of Graphene Transistors with Hydrophobizing Stamps

We demonstrate a simple surface engineering method for fabricating graphene transistors by using hydrophobizing stamps. By simply contact-printing hydrophobizing stamp that is made with polydimethylsiloxane (PDMS) on a standard silicon substrate for a certain contact-time, it was possible to control the contact angle of the substrate and electrical characteristics of the graphene transistors supported on the substrate. Moreover, graphene transistors supported on the engineered silicon substrate showed improved performances, including an increase in carrier mobility and loss of hysteresis. As a proof-of-concept experiment, a simple logic gate operation was demonstrated by connecting a pristine graphene device with an interface-engineered device.

Electrolyte-Gated Graphene Ambipolar Frequency Multipliers for Biochemical Sensing

In this Letter, the ambipolar properties of an electrolyte-gated graphene field-effect transistor (GFET) have been explored to fabricate frequency-doubling biochemical sensor devices. By biasing the ambipolar GFETs in a common-source configuration, an input sinusoidal voltage at frequency f applied to the electrolyte gate can be rectified to a sinusoidal wave at frequency 2f at the drain electrode. The extraordinary high carrier mobility of graphene and the strong electrolyte gate coupling provide the graphene ambipolar frequency doubler an unprecedented unity gain, as well as a detection limit of ∼4 pM for 11-mer single strand DNA molecules in 1 mM PBS buffer solution. Combined with an improved drift characteristics and an enhanced low-frequency 1/f noise performance by sampling at doubled frequency, this good detection limit suggests the graphene ambipolar frequency doubler a highly promising biochemical sensing platform.

In situ Raman spectroscopy of the graphene/water interface of a solution-gated field-effect transistor: electron-phonon coupling and spectroelectrochemistry

We present a novel measurement approach which combines the electrical characterization of solution-gated field-effect transistors based on epitaxial bilayer graphene on 4H-SiC (0001) with simultaneous Raman spectroscopy. By changing the gate voltage, we observed Raman signatures related to the resonant electron-phonon coupling. An analysis of these Raman bands enabled the extraction of the geometrical capacitance of the system and an accurate calculation of the Fermi levels for bilayer graphene. An intentional application of higher gate voltages allowed us to trigger electrochemical reactions, which we followed in situ by Raman spectroscopy. The reactions showed a partially reversible character, as indicated by an emergence/disappearance of peaks assigned to C-H and Si-H vibration modes as well as an increase/decrease of the defect-related Raman D band intensity. Our setup provides a highly interesting platform for future spectroelectrochemical research on electrically-induced sorption processes of graphene on the micrometer scale.

A potentiometric biosensor for rapid on-site disease diagnostics

Quantitative point-of-care (POC) devices are the next generation for serological disease diagnosis. Whilst pathogen serology is typically performed by centralized laboratories using Enzyme-Linked ImmunoSorbent Assay (ELISA), faster on-site diagnosis would infer improved disease management and treatment decisions. Using the model pathogen Bovine Herpes Virus-1 (BHV-1) this study employs an extended-gate field-effect transistor (FET) for direct potentiometric serological diagnosis. BHV-1 is a major viral pathogen of Bovine Respiratory Disease (BRD), the leading cause of economic loss ($2 billion annually in the US only) to the cattle and dairy industry. To demonstrate the sensor capabilities as a diagnostic tool, BHV-1 viral protein gE was expressed and immobilized on the sensor surface to serve as a capture antigen for a BHV-1-specific antibody (anti-gE), produced in cattle in response to viral infection. The gE-coated immunosensor was shown to be highly sensitive and selective to anti-gE present in commercially available anti-BHV-1 antiserum and in real serum samples from cattle with results being in excellent agreement with Surface Plasmon Resonance (SPR) and ELISA. The FET sensor is significantly faster than ELISA (<10 min), a crucial factor for successful disease intervention. This sensor technology is versatile, amenable to multiplexing, easily integrated to POC devices, and has the potential to impact a wide range of human and animal diseases.

A self-amplified transistor immunosensor under dual gate operation: highly sensitive detection of hepatitis B surface antigen

Ion-sensitive field-effect transistors (ISFETs), although they have attracted considerable attention as effective immunosensors, have still not been adopted for practical applications owing to several problems: (1) the poor sensitivity caused by the short Debye screening length in media with high ion concentration, (2) time-consuming preconditioning processes for achieving the highly-diluted media, and (3) the low durability caused by undesirable ions such as sodium chloride in the media. Here, we propose a highly sensitive immunosensor based on a self-amplified transistor under dual gate operation (immuno-DG ISFET) for the detection of hepatitis B surface antigen. To address the challenges in current ISFET-based immunosensors, we have enhanced the sensitivity of an immunosensor by precisely tailoring the nanostructure of the transistor. In the pH sensing test, the immuno-DG ISFET showed superior sensitivity (2085.53 mV per pH) to both standard ISFET under single gate operation (58.88 mV per pH) and DG ISFET with a non-tailored transistor (381.14 mV per pH). Moreover, concerning the detection of hepatitis B surface antigens (HBsAg) using the immuno-DG ISFET, we have successfully detected trace amounts of HBsAg (22.5 fg mL(-1)) in a non-diluted 1× PBS medium with a high sensitivity of 690 mV. Our results demonstrate that the proposed immuno-DG ISFET can be a biosensor platform for practical use in the diagnosis of various diseases.

An aptameric graphene nanosensor for label-free detection of small-molecule biomarkers

This paper presents an aptameric graphene nanosensor for detection of small-molecule biomarkers. To address difficulties in direct detection of small molecules associated with their low molecular weight and electrical charge, we incorporate an aptamer-based competitive affinity assay in a graphene field effect transistor (FET), and demonstrate the utility of the nanosensor with dehydroepiandrosterone sulfate (DHEA-S), a small-molecule steroid hormone, as the target analyte. In the competitive affinity assay, DHEA-S specifically binds to aptamer molecules pre-hybridized to their complementary DNA anchor molecules immobilized on the graphene surface. This results in the competitive release of the strongly charged aptamer from the DNA anchor and hence a change in electrical properties of the graphene, which can be measured to achieve the detection of DHEA-S. We present experimental data on the label-free, specific and quantitative detection of DHEA-S at clinically appropriate concentrations with an estimated detection limit of 44.7 nM, and analyze the trend observed in the experiments using molecular binding kinetics theory. These results demonstrate the potential of our nanosensor in the detection of DHEA-S and other small molecules in biomedical applications.

Graphene field-effect transistor and its application for electronic sensing

Graphene, because of its excellent mechanical, electrical, chemical, physical properties, sparked great interest to develop and extend its applications. Particularly, graphene based field-effect transistors (GFETs) present exciting and bright prospects for sensing applications due to their greatly higher sensitivity and stronger selectivity. This Review highlights a selection of important topics pertinent to GFETs and their application in electronic sensors. This article begins with a description of the fabrications and characterizations of GFETs, and then introduces the new developments in physical, chemical, and biological electronic detection using GFETs. Finally, several perspective and current challenges of GFETs development are presented, and some proposals are suggested for further development and exploration.

High-yield fabrication of nm-size gaps in monolayer CVD graphene

Herein we demonstrate the controlled and reproducible fabrication of sub-5 nm wide gaps in single-layer graphene electrodes. The process is implemented for graphene grown via chemical vapor deposition using an electroburning process at room temperature and in vacuum. A yield of over 95% for the gap formation is obtained. This approach allows producing single-layer graphene electrodes for molecular electronics at a large scale. Additionally, from Raman spectroscopy and electroburning carried out simultaneously, we can follow the heating process and infer the temperature at which the gap formation happens.