Nanocomposite hydrogel for skin motion sensing - An antifreezing, nanoreinforced hydrogel with decorated AuNP as a multicrosslinker

In this study, we present a nanocomposite hydrogel designed for skin motion sensing. The hydrogel is based on poly(acrylamide) crosslinked with gold nanoparticles covalently bound to the polymer matrix, yielding a robust, highly elastic and conductive material. The choice of amino acid derivative - N,N'-diacryloylcystine salt (BISS) - as a crosslinker allows for the introduction of gold nanoparticles, due to the presence of sulfide groups in its structure. During the nanoparticle modification process, covalent bonds between gold and sulfur atoms are formed as the disulfide bond is cleaved. In result of this self-assembly process, a multifunctional Au-BISS crosslinker is formed, enhancing the material's mechanical properties and introducing electrical conductivity. To confer anti-freezing properties and limit water evaporation, a binary mixture of water and glycerol was used. The resultant hydrogel exhibits high elasticity, strain sensitivity across a wide strain range and various types of deformation (elongation, bending, compression) with exceptional response time (120 ms) and recovery time (90 ms). The material's cold-resistance, resilience, and conductivity make it well-suited for real-time monitoring of joint movements and speech recognition, with potential applications in electronic skin and healthcare monitoring devices.

A structural color hydrogel for diagnosis of halitosis and screening of periodontitis

Oral pathogens can produce volatile sulfur compounds (VSCs), which is the main reason for halitosis and indicates the risk of periodontitis. High-sensitivity detection of exhaled VSCs is urgently desired for promoting the point-of-care testing (POCT) of halitosis and screening of periodontitis. However, current detection methods often require bulky and costly instruments, as well as professional training, making them impractical for widespread detection. Here, a structural color hydrogel for naked-eye detection of exhaled VSCs is presented. VSCs can reduce disulfide bonds within the network, leading to expansion of the hydrogel and thus change of the structural color. A linear detection range of 0-1 ppm with a detection limit of 61 ppb can be achieved, covering the typical VSC concentration in the breath of patients with periodontitis. Furthermore, visual and in situ monitoring of Porphyromonas gingivalis responsible for periodontitis can be realized. By integrating the hydrogels into a sensor array, the oral health conditions of patients with halitosis can be evaluated and distinguished, offering risk assessment of periodontitis. Combined with a smartphone capable of color analysis, POCT of VSCs can be achieved, providing an approach for the monitoring of halitosis and screening of periodontitis.

Thermo-Electro-Responsive Redox-Copolymers for Amplified Solvation, Morphological Control, and Tunable Ion Interactions

Electro-responsive metallopolymers can possess highly specific and tunable ion interactions, and have been explored extensively as electrode materials for ion-selective separations. However, there remains a limited understanding of the role of solvation and polymer-solvent interactions in ion binding and selectivity. The elucidation of ion-solvent-polymer interactions, in combination with the rational design of tailored copolymers, can lead to new pathways for modulating ion selectivity and morphology. Here, we present thermo-electrochemical-responsive copolymer electrodes of N-isopropylacrylamide (NIPAM) and ferrocenylpropyl methacrylamide (FPMAm) with tunable polymer-solvent interactions through copolymer ratio, temperature, and electrochemical potential. As compared to the homopolymer PFPMAm, the P(NIPAM0.9-co-FPMAm0.1) copolymer ingressed 2 orders of magnitude more water molecules per doping ion when electrochemically oxidized, as measured by electrochemical quartz crystal microbalance. P(NIPAM0.9-co-FPMAm0.1) exhibited a unique thermo-electrochemically reversible response and swelled up to 83% after electrochemical oxidation, then deswelled below its original size upon raising the temperature from 20 to 40 °C, as measured through spectroscopic ellipsometry. Reduced P(NIPAM0.9-co-FPMAm0.1) had an inhomogeneous depth profile, with layers of low solvation. In contrast, oxidized P(NIPAM0.9-co-FPMAm0.1) displayed a more uniform and highly solvated depth profile, as measured through neutron reflectometry. P(NIPAM0.9-co-FPMAm0.1) and PFPMAm showed almost a fivefold difference in selectivity for target ions, evidence that polymer hydrophilicity plays a key role in determining ion partitioning between solvent and the polymer interface. Our work points to new macromolecular engineering strategies for tuning ion selectivity in stimuli-responsive materials.

Nanocomposite Organogel for Art Conservation─A Novel Wax Resin Removal System

We describe a new, safe, and effective method for removing wax resin adhesive from the canvases of paintings conserved by the once widely used Dutch Method, which involved attaching a new canvas to the back of a painting using an adhesive made of beeswax and natural resin. First, a low-toxicity cleaning mixture for dissolving the adhesive and removing it from the canvases was developed, and then a nanocomposited organogel was obtained. The ability of the organogel to remove the adhesive from canvases was investigated on the lining of the 1878 painting "Battle of Grunwald" by Jan Matejko, with promising results. Additionally, we found that the organogel can be used several times with no visible loss of cleaning ability. Finally, the effectiveness and safety of the method were confirmed on two oil paintings (one from the National Museum in Warsaw): all the wax resin adhesive was removed and the painting regained its original brightness and vivid colors.

Temperature-Modulated Changes in Thin Gel Layer Thickness Triggered by Electrochemical Stimuli

A series of thermoresponsive hydrogels containing positively charged groups in the polymeric network were synthesized and modified with the electroactive compound 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS). ABTS, which forms a dianion in aqueous solutions, acts as an additional physical cross-linker and strongly affects the swelling ratio of the gels. The influence of the amount of positively charged groups and ABTS oxidation state on the volume phase transition temperature was investigated. A hydrogel that possesses a relatively wide and well-defined temperature window (the temperature range where changes in the ABTS oxidation state affects the swelling ratio significantly) was found. The influence of the presence and oxidation state of ABTS on mechanical properties was investigated using a tensile machine and a rheometer. Then, a very thin layer of the gel was deposited on an Au electrochemical quartz crystal microbalance with dissipation (EQCM-D) electrode using the electrochemically induced free radical polymerization method. Next, chronoamperometry combined with quartz crystal microbalance measurements, obtained with an Au EQCM-D electrode modified by the gel, showed that the size of the thin layer could be controlled by an electrochemical trigger. Furthermore, it was found that the electrosensitivity could be modulated by the temperature. Such properties are desired from the point of view construction of electrochemical actuators.

Model-based design and synthesis of ferrocene containing microgels

Modelling and synthesis go hand in hand to efficiently engineer copolymer microgels with various architectures: core–shell structures (with ferrocene mainly in the core or in the shell) and also microgels with homogeneous comonomer distribution.

A Novel Strategy for the Synthesis of Amphiphilic and Thermoresponsive Poly(N-isopropylacrylamide)-b-Polystyrene Block Copolymers via ATRP

A new synthetic approach is presented for the preparation of Poly(N-isopropylacrylamide-block-styrene) PNIPAM-b-PS via an Atom Transfer Radical Polymerization (ATRP) technique. The proposed method is based on application of 2-chloro-N-(2-hydroxyethyl)propanamide (NCPAE) as a bifunctional initiator, which enables ATRP of two monomers, differing in activity and polarity, into two stages. The synthesized copolymer molecules contain two well-defined polymer chains connected by a linker, which is a derivative of the proposed initiator. Using NCPAE led to PNIPAMs with well-planned molecular weight, low polydispersities (PDI=1.1÷1.3) and hydroxyl functionality. Activation of such blocks for initiation of styrene polymerization was performed using α-bromoisobutyryl bromide. After such a modification, the synthesized homopolymers acted as macroinitiators in ARGET ATRP and a well-defined polystyrene block, as the next one in the polymer chain was successfully formed. Both of the synthesized macromolecules, PNIPAM and PNIPAM-b-PS, exhibit a thermoresponsive behavior with explicit lower critical solution temperatures (LCST) in their aqueous solutions. The synthesized homopolymers and subsequently derived block copolymers were characterized using Size-Exclusion Chromatography, Differential Scanning Calorimetry, Dynamic Light Scattering, and NMR spectroscopy.

Triggering the Shrinking/Swelling Process in Thin Gel Layers on Conducting Surfaces by Applying an Appropriate Potential

Negatively charged, pH-sensitive, very thin gel layers with accumulated hexaammineruthenium (II)/(III) were deposited on conducting surfaces. The gel was synthesized by applying an electrochemically induced free-radical polymerization method. This method allowed covering the electrode surface with an uniform and compact layer. The modified electrodes exhibited excellent current switch on/off behavior in response to changes in pH. However, the main goal of this study was to achieve the control of the layer thickness by changing the oxidation state of hexaammineruthenium. The layers could be reversibly swollen/shrinked by applying appropriate potentials.

Cargo shuttling by electrochemical switching of core-shell microgels obtained by a facile one-shot polymerization

Controlling and understanding the electrochemical properties of electroactive polymeric colloids is a highly topical but still a rather unexplored field of research. This is especially true when considering more complex particle architectures like stimuli-responsive microgels, which would entail different kinetic constraints for charge transport within one particle. We synthesize and electrochemically address dual stimuli responsive core-shell microgels, where the temperature-responsiveness modulates not only the internal structure, but also the microgel electroactivity both on an internal and on a global scale. In detail, a facile one-step precipitation polymerization results in architecturally advanced poly(N-isopropylacrylamide-co-vinylferrocene) P(NIPAM-co-VFc) microgels with a ferrocene (Fc)-enriched (collapsed/hard) core and a NIPAM-rich shell. While the remaining Fc units in the shell are electrochemically accessible, the electrochemical activity of Fc in the core is limited due to the restricted mobility of redox active sites and therefore restricted electron transfer in the compact core domain. Still, prolonged electrochemical action and/or chemical oxidation enable a reversible adjustment of the internal microgel structure from core-shell microgels with a dense core to completely oxidized microgels with a highly swollen core and a denser corona. The combination of thermo-sensitive and redox-responsive units being part of the network allows for efficient amplification of the redox response on the overall microgel dimension, which is mainly governed by the shell. Further, it allows for an electrochemical switching of polarity (hydrophilicity/hydrophobicity) of the microgel, enabling an electrochemically triggered uptake and release of active guest molecules. Hence, bactericidal drugs can be released to effectively kill bacteria. In addition, good biocompatibility of the microgels in cell tests suggests suitability of the new microgel system for future biomedical applications.

Tuning Electrochemiluminescence in Multistimuli Responsive Hydrogel Films

Luminescent and redox properties of stimuli-responsive hydrogel materials have been modulated by different external stimuli which trigger swelling or collapse of the polymer matrix. There is very rapid development in the field of such "smart" materials particularly combined with other sensing functionalities. Here, a poly(N-isopropylacrylamide) matrix incorporating covalently bound phenylboronic acids as a saccharide-sensing unit and redox-active [Ru(bpy)₃]²⁺ luminophores was designed and exhibited multistimuli responsive electrochemical and luminescent switching behaviors. Redox activity of the films is reversibly changed by sequential stimuli (fructose and temperature) which control the swelling and the collapse of the films. Finally, electrogenerated chemiluminescence (ECL) is enhanced by a ∼16-fold factor during the film collapse induced by the temperature, whereas the swelling due to fructose provokes the decrease of the light emission. We demonstrate for the first time that ECL response correlates intrinsically with the swelling ratio and is finely modulated by both stimuli. The multistimuli responsive characteristics of such ECL-active hydrogels should find promising applications in biosensing, new luminescent materials, and logic gates in bioelectronic devices.

Amino acid-derived stimuli-responsive polymers and their applications

The recent advances achieved in the study of various stimuli-responsive polymers derived from natural amino acids have been reviewed.

Utilizing Inverse Emulsion Polymerization To Generate Responsive Nanogels for Cytosolic Protein Delivery

Therapeutic biologics have various advantages over synthetic drugs in terms of selectivity, their catalytic nature, and, thus, therapeutic efficacy. These properties offer the potential for more effective treatments that may also overcome the undesirable side effects observed due to off-target toxicities of small molecule drugs. Unfortunately, systemic administration of biologics is challenging due to cellular penetration, renal clearance, and enzymatic degradation difficulties. A delivery vehicle that can overcome these challenges and deliver biologics to specific cellular populations has the potential for significant therapeutic impact. In this work, we describe a redox-responsive nanoparticle platform, which can encapsulate hydrophilic proteins and release them only in the presence of a reducing stimulus. We have formulated these nanoparticles using an inverse emulsion polymerization (IEP) methodology, yielding inverse nanoemulsions, or nanogels. We have demonstrated our ability to overcome the liabilities that contribute to activity loss by delivering a highly challenging cargo, functionally active caspase-3, a cysteine protease susceptible to oxidative and self-proteolytic insults, to the cytosol of HeLa cells by encapsulation inside a redox-responsive nanogel.

Changes in the volume phase transition temperature of hydrogels for detection of the DNA hybridization process

A simple biosensing platform which involves the application of thermoresponsive hydrogels (p(NIPA-co-AA)) for detection of target DNA sequences is presented. For this aim the hydrogel based on N-isopropylacrylamide grafted with carboxyl groups was modified with H₂N-ssDNA via the amide bond. The detection of target DNA sequences was achieved successfully by monitoring the volume phase transition temperature (VPTT). It was found that the dependence between the VPTT and the concentration of the target complementary DNA is linear in the concentration range from 10^-12 to 10^-6 M. The proposed DNA detection method is characterized by high sensitivity and good reproducibility. The detection limit obtained (∼1 pM) is a substantial improvement over DNA biosensor labelling with tags, because the detection is based on a physical parameter (VPTT). Circular dichroism (CD) and inductively coupled plasma mass spectrometry with laser ablation (LA-ICP-MS) proved that the hybridization process took place in the hydrogel matrix without any restrictions.

Electrochemical examination of ability of dsDNA/PAM composites for storing and releasing of doxorubicin

Composites consisting of ss- and ds-DNA strands and polyacrylamide (PAM) hydrogel have been synthesized. DNA was entrapped non-covalently. The obtained DNA biomaterial exhibited a strong increase in guanine and adenine anodic currents when temperature reached the physiological level. This increase was related to the unique oligonucleotide structural changes in the composite. The structural alterations in the PAM lattices were employed for the release of the drug accumulated in the composite. Doxorubicin (Dox) was selected as the drug; it was accumulated by intercalation to dsDNA and was slowly released from the dsDNA/PAM system by using a minor temperature increase (up to 40÷45 °C) as it is routinely done in hyperthermia. The applied release temperature was either constant or oscillating. The binding strength, the rate of Dox release and the properties of the composite were examined using voltammetry, SEM and ICP-MS.

Stable and degradable microgels linked with cystine for storing and environmentally triggered release of drugs

Microgels crosslinked with a cysteine derivative, which has ability to control gel degradation and trigger drug release.