Enhanced iodide removal from aqueous solutions using 3D-printed PLA scaffold coated with Cu/Cu2O nanoparticles

In nuclear power plant accidents, radioactive iodine (129I, 131I) can enter the environment, accumulate in the food chain, and pose significant health risks. We developed a novel scaffold using Cu/Cu2O nanoparticles immobilized on a polylactic acid 3D-printed scaffold for efficient iodide removal. The PLA scaffold was fabricated using a fused deposition modeling 3D printer, then surface-modified for enhanced hydrophilicity and functionalized with carboxyl groups via hydrolysis and acrylic acid grafting. Cu/Cu2O nanoparticles were immobilized on the modified surface. The adsorption capacity, determined using the Langmuir model, was 4.85 mg/g, and adsorption kinetics followed a pseudo-second-order model. The iodide removal mechanism was primarily driven by redox reactions between Cu(0), Cu(I) and iodide, leading to the formation of copper iodide (CuI), as confirmed by X-ray diffraction and Raman spectroscopy. Importantly, the Cu/Cu2O scaffold exhibited excellent structural stability during adsorption, with minimal copper leaching (<0.08 mg/L). Characterization of the Cu/Cu2O scaffold using scanning electron microscopy with energy-dispersive spectroscopy and X-ray photoelectron spectroscopy analysis supported these results. The scaffold demonstrated high selectivity for iodide ions even with competing anions. The scaffold maintained its effectiveness across a wide pH range, and continuous column tests separately confirmed its suitability for practical applications in environmental remediation and wastewater treatment systems. In summary, we successfully fabricated a 3D-printed Cu/Cu2O-PLA scaffold, demonstrated its efficient iodide removal performance, and elucidated the underlying redox-driven adsorption mechanism.

Fe3O4-Cu-BTC/MWCNTs modified electrodes for real-time chlorine monitoring in aqueous solution

A efficient sensor is presented for detecting free chlorine in water by decorating glassy carbon electrodes (GCE) via multi-walled carbon nanotubes (MWCNTs) and Fe3O4-Cu-BTC composite. After the characterization of prepared materials by field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR) techniques, and N2 adsorption-desorption isotherm, the electrochemical properties of Fe3O4-Cu-BTC/MWCNTs/GC-modified electrode were assessed with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). CV and chronoamperometry measurement in phosphate buffer solution with pH 7.0 proved the capability of the designed sensor to detect free chlorine. With amperometric detection, the modified electrode exhibits a linear response in the 0.1 to 400.0 ppm range towards free chlorine with a detection limit (LOD) (S/N = 3) of 0.0044 ppm, sufficient to control swimming pool water. To assay the practicability of the designed sensor in real situations, interferences of common ions and dissolved oxygen were tested on free chlorine determination and showed admirable selectivity. The proposed sensor also provides satisfactory results of free chlorine measurement in different real samples of swimming pool waters. The results of this work affirmed that MOF composite could be a promising material in the architecture of free chlorine electrochemical sensors in aqueous media.

NIR-II-Responsive Versatile Nanozyme Based on H2O2 Cycling and Disrupting Cellular Redox Homeostasis for Enhanced Synergistic Cancer Therapy

Disturbing cellular redox homeostasis within malignant cells, particularly improving reactive oxygen species (ROS), is one of the effective strategies for cancer therapy. The ROS generation based on nanozymes presents a promising strategy for cancer treatment. However, the therapeutic efficacy is limited due to the insufficient catalytic activity of nanozymes or their high dependence on hydrogen peroxide (H2O2) or oxygen. Herein, we reported a nanozyme (CSA) based on well-defined CuSe hollow nanocubes (CS) uniformly covered with Ag nanoparticles (AgNPs) to disturb cellular redox homeostasis and catalyze a cascade of intracellular biochemical reactions to produce ROS for the synergistic therapy of breast cancer. In this system, CSA could interact with the thioredoxin reductase (TrxR) and deplete the tumor microenvironment-activated glutathione (GSH), disrupting the cellular antioxidant defense system and augmenting ROS generation. Besides, CSA possessed high peroxidase-mimicking activity toward H2O2, leading to the generation of various ROS including hydroxyl radical (•OH), superoxide radicals (•O2-), and singlet oxygen (1O2), facilitated by the Cu(II)/Cu(I) redox and H2O2 cycling, and plentiful catalytically active metal sites. Additionally, due to the absorption and charge separation performance of AgNPs, the CSA exhibited excellent photothermal performance in the second near-infrared (NIR-II, 1064 nm) region and enhanced the photocatalytic ROS level in cancer cells. Owing to the inhibition of TrxR activity, GSH depletion, high peroxidase-mimicking activity of CSA, and abundant ROS generation, CSA displays remarkable and specific inhibition of tumor growth.

Photocatalytic Deposition of Au Nanoparticles on Ti3C2Tx MXene Substrates for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) is a promising technique for sensitive detection. The design and optimization of plasma-enhanced structures for SERS applications is an interesting challenge. In this study, we found that the SERS activity of MXene (Ti3C2Tx) can be improved by adding Au nanoparticles (NPs) in a simple photoreduction process. Fluoride-salt-etched MXene was deposited by drop-casting on a glass slide, and Au NPs were formed by the photocatalytic growth of gold(III) chloride trihydrate solutions under ultraviolet (UV) irradiation. The Au-MXene substrate formed by Au NPs anchored on the Ti3C2Tx sheet produced significant SERS through the synergistic effect of chemical and electromagnetic mechanisms. The structure and size of the Au-decorated MXene depended on the reaction time. When the MXene films were irradiated with a large number of UV photons, the size of the Au NPs increased. Hot spots were formed in the nanoscale gaps between the Au NPs, and the abundant surface functional groups of the MXene effectively adsorbed and interacted with the probe molecules. Simultaneously, as a SERS substrate, the proposed Au-MXene composite exhibited a wider linear range of 10-4-10-9 mol/L for detecting carbendazim. In addition, the enhancement factor of the optimized SERS substrate Au-MXene was 1.39 × 106, and its relative standard deviation was less than 13%. This study provides a new concept for extending experimental strategies to further improve the performance of SERS.

Nanocomposites of Cu2O with plasmonic metals (Au, Ag): design, synthesis, and photocatalytic applications

Metal-semiconductor nanocomposites have been utilized in a multitude of applications in a wide array of fields, prompting substantial interest from different scientific sectors. Of particular interest are semiconductors paired with plasmonic metals due to the unique optical properties that arise from the individual interactions of these materials with light and the intercomponent movement of charge carriers in their heterostructure. This review focuses on the pairing of Cu2O semiconductor with strongly plasmonic metals, particularly Au and Ag. The design and synthesis of Au-Cu2O and Ag-Cu2O nanostructures, along with ternary nanostructures composed of the three components, are described, with in-depth discussion on the synthesis techniques and tunable parameters. The effects of compositing on the optical and electronic properties of the nanocomposites in the context of photocatalysis are discussed as well. Concluding remarks and potential areas for exploration are presented in the last section.

Fast and easy synthesis of silver, copper, and bimetallic nanoparticles on cellulose paper assisted by ultrasound

This work focuses on a systematic method to produce Ag, Cu, and Ag/Cu metallic nanoparticles (MNPs) in situ assisted with ultrasound on cellulose paper. By tuning the concentration of AgNO3 and CuSO4 salt precursors and ultrasound time, combined with a fixed concentration of ascorbic acid (AA) as a reducing agent, it was possible to control the size, morphology, and polydispersity of the resulting MNPs on cellulose papers. Notably, high yield and low polydispersity of MNPs and bimetallic nanoparticles are achieved by increasing the sonication time on paper samples pre-treated with salt precursors before reduction with AA. Moreover, mechanical analysis on paper samples presenting well-dispersed and distributed MNPs showed slightly decreasing values of Young's modulus compared to neat papers. The strain at break is substantially improved in papers containing solely Ag or Cu MNPs. The latter suggests that the elastic/plastic transition and deformation of papers are tuned by cellulose and MNPs interfacial interaction, as indicated by mechanical analysis. The proposed method provides insights into each factor affecting the sonochemistry in situ synthesis of MNPs on cellulose papers. In addition, it offers a straightforward alternative to scale up the production of MNPs on paper, ensuring an eco-friendly method.

Fabrication and Characterization of Au-Decorated MCM-41 Mesoporous Spheres Using Laser-Ablation Technique

This study reports the synthesis of Au-decorated MCM-41 mesoporous nanoparticles using a laser-ablation technique. It was observed that the number of Au attached to MCM-41 nanostructures was dependent on the amount of encapsulated Cationic surfactant (cetyl ammonium bromide (CTAB) volume. The chemical group of the prepared nanoparticles was analyzed by FT-IR spectroscopy, where different absorption peaks corresponding to Au and MCM-41 were observed. The observed band region was ∼1090, 966, 801, 2918, and 1847 cm^-1 for different samples, clearly confirming the successful preparation of MCM-41 with CTAB and Au-decorated MCM-41 nanoparticles using environmentally friendly laser-ablation approach. The surface morphology of the prepared nanoparticles were performed using TEM techniques. The TEM analysis of the MCM-41 specimen showed silica spheres with an average size of around 200 nm. Furthermore, Raman spectroscopy was done to evaluate the chemical structure of the prepared nanoparticles. It was seen that the prepared Au NPs decorated the MCM-41 system facilitated strong Raman peaks of CTAB. In addition, eight distinct Raman peaks were observed in the presence of Au NPs. This new functionalized method using the laser-ablation approach for mesoporous nanoparticles will participate effectively in multiple applications, especially the encapsulated molecule sensing and detection.

Day-night active photocatalysts obtained through effective incorporation of Au@CuxS nanoparticles onto ZnO nanowalls

Photocatalytic degradation of organic dyes has been considered one of the promising solutions that enabled to effectively treat the demanding pollutants in wastewater. Yet, insight into the photocatalytic process under both illumination and dark conditions were hitherto missing. Herein, by virtue of incorporating the core-shell Au@Cu_xS nanoparticles to the ZnO nanowalls synthesized via all-solution synthesis, the intriguing heterostructures allowed to trigger the extraordinary capability of dye degradation either under light irradiance or dark environment. It was found that the coexistence of bi-constituted Cu₂S/CuS shells on Au nanoparticles obtained with turning the concentrations of sulfurization acted as the decisive role on day-night active degradation performance, where the degradation efficiency was more than 8.3 times beyond sole ZnO sheets. The mediation of remarkable visible-light absorption and efficient charge separation due to band alignment of heterojunctions were responsible for the improved photodegradation efficiency under visible illuminations. Moreover, at dark environment, the involving peroxidase-like activity of Cu_xS shells with the mediation of Au nanoparticles facilitated the catalytic formation of hydroxyl radicals, manifesting the oxidative degradation of MB dye. Such all-day active photocatalysts further displayed the capability for the recycling treatment of MB dye, which offered the pathways to potentially treat the organic wastewater.

Ag-SPR and semiconductor interface effect on a ternary CuO@Ag@Bi2S3 Z-scheme catalyst for enhanced removal of HIV drugs and (photo)catalytic activity

The development of ternary composites has gained great interest as they can be used as a catalyst due to the different semiconductors with the variation in the band edge positions creates a potential gradient at the composite interface.

Hydrothermal Synthesis of Ag Thin Films and Their SERS Application

In this article, a facile, one-step method for the formation of silver thin-film nanostructures on the surface of Al₂O₃ substrates using the hydrothermal method is proposed. The dependence of the SERS effect intensity of the formed films during the detection of methylene blue (MB) low concentrations on the synthesis conditions, additional temperature treatment, and laser radiation wavelength (532 and 780 nm) in comparison with similar dye films on commercial SERS substrates is shown. The detection limit of the analyte used for the indicated lasers is estimated. The effect of the synthesis temperature on the particle size, crystal structure, and microstructure features of the obtained thin films based on silver nanoparticles is demonstrated. Using spreading resistance microscopy, the interface between the substrate and Ag particles is studied, and the dependence of the size of the corresponding gap between them and the nature of microstructural defects on the parameters of hydrothermal treatment of reaction systems in the presence of Al₂O₃ substrates is shown. As a result of the study, the factors associated with the properties of the obtained SERS substrates and the parameters of recording the spectra, which affect the amplification factor of the spectral lines intensity of the analyte, are revealed.

Rapid bacterial elimination achieved by sonodynamic Au@Cu2O hybrid nanocubes

Although efforts have been devoted to develop new antibacterial agents and techniques, the challenge of bacterial infection remains unresolved and is even increasing. Sonodynamic therapy (SDT) driven by ultrasound (US) has demonstrated effectiveness in terms of penetration and it can help to clinically address the problem of deep tissue bacterial infection. In recent years, a variety of sonosensitizers, which were originally designed for photodynamic therapy, have been adopted for SDT. Yet, their unstable chemical stability and ineffective electron-hole separation are not favorable for clinical applications. Hence, we designed a new type of antibacterial sonosensitizer-namely, Au@Cu₂O hybrid nanocubes-in which an interfacial Schottky junction was built between a p-type semiconductor Cu₂O and a noble metal Au. When US stimulation was applied, the electrons from Cu₂O could be excited at the junction and transferred to Au. Since the formed Schottky barrier could block the backflow of US-excited electrons, a prolonged electron-hole separation can be successfully established. Additionally, because of the boosted sonocatalytic activity, the Au@Cu₂O hybrid nanocubes could produce a large amount of reactive oxygen species (ROS), which are subject to US stimulation. Furthermore, we found that the sonocatalytic activity of the Au@Cu₂O hybrid nanocubes could be reinforced by increasing the amount of Au, enabling 99.67% of Staphylococcus aureus (S. aureus) to be killed by US stimulation for 15 minutes. The cytocompatibility of Au@Cu₂O hybrid nanocubes was improved by a red blood cell membrane (RBC) coating over the surface, and the membrane did not sacrifice its superior antibacterial properties.

Silver nanoparticle-decorated TiO2 nanotube array for solid-phase microextraction and SERS detection of antibiotic residue in milk

The excessive use or abuse of antibiotics on dairy cows leads to residues in milk, which can represent a public health risk. However, in recent years the β-Lactamase was illegally used to degrade residual antibiotics in milk, which makes the traditional antibiotic detection methods ineffective. Therefore, there is an extremely urgent need for multi-analyte analysis techniques for the detection of antibiotic residues. Herein, we reported an ultra-fast, facile, and sensitive solid-phase microextraction (SPME)-surface enhanced Raman scattering (SERS) platform for the detection of degraded antibiotics-2-mercapto-5-methyl-1,3,4-thiadiazole (MMT). The results showed that the log-log plot of SERS intensity to MMT concentration exhibits a superior linear relationship (R² = 0.992) in the concentration range of 0.5-1000 μM, with a detection limit of 0.11 μM. The silver nanoparticle-decorated TiO₂ nanotube array was successfully used as an all-in-one SPME-SERS substrate in the extraction and identification of the antibiotic degradation products in real milk. Due to the rapid pre-treatment, good reproducibility, and self-cleaning, the proposed SPME-SERS method has a great promise to be applied as a powerful tool for on-site detection in the field of food safety.

Recent advances in Cu2O-based composites for photocatalysis: a review

Cu₂O-based composites for photocatalysis have been extensively explored owing to their promising application in solving environmental and energy problems. At present, the research on photocatalysis is focused on improving the photocatalytic performance of materials. It has been reported that adjusting the morphology and size of Cu₂O can effectively improve its photocatalytic property. However, photocorrosion is still an inevitable problem, which hinders the application of Cu₂O in photocatalysis. The strategies of constructing heterogeneous nanostructures and ion doping can significantly improve the light stability, light absorption capacity and separation efficiency of electron-hole pairs. Cu₂O-based composites exhibit superior performances in degrading organic matter, producing hydrogen, reducing CO₂ and sterilization. Therefore, the construction of multi-materials will be one of the future directions in their photocatalytic application. This review summarizes the recent strategies for enhancing the photocatalytic activity of Cu₂O by analyzing different Cu₂O-based photocatalysts, and the charge transfer pathway is further discussed in detail. Finally, several opportunities and challenges in the field of photocatalysis are illustrated.

Cu2O nanocubes-grafted highly dense Au nanoparticles with modulated electronic structures for improving peroxidase catalytic performances

Based on the intermediate states of metal ions in metal oxide nanomaterials (NMs) that acted as the primary active species, the design of high-performance nanozymes has greatly stimulated current research in diverse biomedical applications. Herein, Cu₂O nanocubes-grafted highly dense Au nanoparticles (NPs) was developed as an appealing nanozyme for H₂O₂ colorimetric sensor and antioxidant detections. The obtained Au/Cu₂O heterostructures show efficient electron-transfer from metallic NPs to Cu₂O nanocubes owing to the difference of Fermi energy between two components. The modulated electronic structure of Au/Cu₂O hybrids enables them to possess enhanced peroxidase catalytic activity for the oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB) in the presence of H₂O₂, which is about 32% higher than that of pristine Cu₂O nanocubes. Then, an excellent H₂O₂ colorimetric sensor was established by using Au/Cu₂O heterostructures with a low limit of detection (LOD) of 0.054 μM, which is much lower than the H₂O₂ allowance level of US FDA regulations (ca.15 μM, 0.05 wt%). The obtained Au/Cu₂O nanoproducts exhibit pronounced long-time stability with 95% peroxidase activity maintained after keeping them for 30 days, while residual 64.5% via Cu₂O nanocubes. Furthermore, we assessed the anti-oxidative behavior of three natural antioxidants (tannic acid, gallic acid, tartaric acid) with the LODs as low as 0.039, 0.16 and 1.55 μM, respectively, and the antioxidant capacity in the following order: tannic acid > gallic acid > tartaric acid. Therefore, it is believed that the as-prepared Au/Cu₂O nanozymes have promising potential applications in fields of biomedicine and food safety.

Immobilizing Ag/Cu2O on cotton fabric to enhance visible light photocatalytic activity

Ag/Cu₂O composites were prepared by the solvothermal and photo-reduction method.

Surface-enhanced Raman scattering studies of Cu/Cu2O Core-shell NPs obtained by laser ablation

In order to perform SERS (surface-enhanced Raman scattering) measurements, spherical Cu/Cu₂O core-shell NPs with a rather rough rugged surface and well-defined crystallographic structures were fabricated using nanosecond Ce: Nd YAG pulsed laser ablation in liquid (PLAL). Raman, Fourier transform infrared (FTIR) spectroscopy and TEM imaging of the prepared NPs reveal the existence of additional minority CuO phase, not determined earlier through XRD patterns. The SERS activity of Cu/Cu₂O core-shell NPs substrates was investigated by using crystal violet (CV) and methylene blue (MB) as the analyte molecules under 532 nm excitation wavelength irradiation. The effect of localized surface plasmon resonance (LSPR) from Cu core contributing to the electromagnetic enhancement and Cu2O shell with a rough surface which itself contributes to chemical enhancement with adsorbed analyte molecule is due to a high overall SERS enhancement. The intensities of the totally and non-totally symmetric modes were used to calculate the degree of charge-transfer. The results demonstrate that the LSPR enhancement dominates charge-transfer resonance contribution in SERS of Cu/Cu2O-CV and Cu/Cu2O -MB systems. The reproducibility of the prepared SERS substrates was investigated and the SERS signals intensity variation was <28%.

Interfacial engineering of Ag nanodots/MoSe2 nanoflakes/Cu(OH)2 hybrid-electrode for lithium-ion battery

Although the Lithium ion batteries (LIBs) have attracted remarkable attentions, their practical development is hindered by the low rate performance and poor unit area capacity, which is significantly caused by the low conductivity of the active electrode materials. Herein, a three-dimensional (3D) architecture consisting of Ag nanodots embedded MoSe₂ sheets wrapping Cu(OH)₂ nanorods (Cu(OH)₂/MoSe₂/Ag) hybrids were in-situ synthesized on self-standing Cu- foam collector for LIBs application. The 2D MoSe₂ nanoflakes supported on 1D highly conductive Cu nanowires provides efficient pathways for both electrons and ions. The embedded Ag nanodots in the MoSe₂ as the internal-plane active sites not only improves the intrinsic conductivity but also allows the reversible formation and decompose of Ag-Li alloy, and thus leading to the promotion of Li⁺ ion storage. As a result, the Cu(OH)₂/MoSe₂/Ag electrode exhibits a high reversible discharge capacity of 1285.5 mAh g^-1 (current density of 0.2 C), good rate performance (discharge-specific capacity remained 544.8 mAh g^-1 at 5.0C), and excellent cycling stability (with almost no decay after 500 cycles). Significantly, the 3D Cu(OH)₂/MoSe₂/Ag electrode exhibits a high areal capacity of 2.50 mAh cm^-2 at a high current density of 1.82 mA cm^-2. This work provides the new insight into interfaces engineering for 3D architecture toward advanced self-standing LIB electrodes.

Self-formed silver nanoparticles on freestanding silicon nanowire arrays featuring SERS performances

Herein, the universal luminescence characteristics of porous Si nanowire arrays were exploited using a wide range of doping types and concentrations; we found that the dual-band photoluminescence intensities were correlated with the formation rates of Si nanowires with porous features; however, these intensities exhibited no evident dependence on the doping conditions. Furthermore, we demonstrated a facile and reliable transfer method implementing the freestanding Si nanowire arrays while maintaining the robust photoluminescence behaviors under bending conditions. The fabrication protocol, involving lateral etching locally at the nanowire ends, enabled the controlled formation of uniform and large-area transferred nanowires with vertical regularity. Without the additional deposition of Ag nanoparticles, these transferred Si nanowire films inherently possessed SERS sensing capability with a relative enhancement factor over 1.8 times that of the Si nanowires with electroless-deposited Ag nanoparticles, which could practically emerge as a functional design for the integration of practical biochip devices.

Self-assembled Cube-like Copper Oxide Derived from a Metal-Organic Framework as a High-Performance Electrochemical Supercapacitive Electrode Material

Interest in pseudocapacitive materials, especially cuprous oxide, has grown owing to its various advantageous properties and application as electrode materials in the energy storage devices. The work presented here, a cubic Cu2O framework was synthesized using a simple and one-step modified polyol-assisted (metal-organic framework) solvothermal method. The structural configuration was rationalized by systematically studying the effect of the reaction time on the morphology and growth of the Cu2O. In addition, a range of microscopic and spectroscopic techniques was employed to further characterize the obtained cubic Cu2O. The morphological effect on the electrochemical supercapacitive performance of the obtained cubic Cu2O was also examined by cyclic-voltammetry (CV) and galvanostatic-charge-discharge (G-C-D) method. The obtained outcome shows that the cubic Cu2O synthesized using a reaction time of 12 h (Cu2O-12h; Csp ~365 Fg-1) exhibited superior capacitive performance as compared to the cubic Cu2O synthesized at 8 h (Cu2O-8h; Csp ~151 Fg-1) and 10 h (Cu2O-10h; Csp ~195 Fg-1) at the current density of 0.75 Ag-1. Furthermore, the Cu2O-12h electrode exhibits energy density of 16.95 Wh/Kg at a power density of 235.4 W/Kg and higher power density of 2678.5 W/Kg at low current density. In particular, the cube-like Cu2O-12h exhibited excellent capacitive performance and rate capability as compared to Cu2O-8h and Cu2O-10h, owing to its unique three-dimensional morphology, which facilitates the formation of various active sites for intercalation of the electrolyte during the electrochemical process. These results show the as-obtained Cu2O could be a promising supercapacaitive electrode material for various applications.

Selective Functionalization of High-Resolution Cu₂O Nanopatterns via Galvanic Replacement for Highly Enhanced Gas Sensing Performance

Recently, high-resolution patterned metal oxide semiconductors (MOS) have gained considerable attention for enhanced gas sensing performance due to their polycrystalline nature, ultrasmall grain size (~5 nm), patternable properties, and high surface-to-volume ratio. Herein, we significantly enhanced the sensing performance of that patterned MOS by galvanic replacement, which allows for selective functionalization on ultrathin Cu₂O nanopatterns. Based on the reduction potential energy difference between the base channel material (Cu₂O) and the decorated metal ion (Pt²⁺), Pt could be selectively and precisely decorated onto the desired area of the Cu₂O nanochannel array. Overall, the Pt-decorated Cu₂O exhibited 11-fold higher NO₂ (100 ppm) sensing sensitivity as compared to the non-decorated sensing channel, the while the channel device with excessive Pt doping showed complete loss of sensing properties.

Oxygen-deficient photostable Cu2O for enhanced visible light photocatalytic activity

Oxygen vacancies in inorganic semiconductors play an important role in reducing electron-hole recombination, which may have important implications in photocatalysis. Cuprous oxide (Cu2O), a visible light active p-type semiconductor, is a promising photocatalyst. However, the synthesis of photostable Cu2O enriched with oxygen defects remains a challenge. We report a simple method for the gram-scale synthesis of highly photostable Cu2O nanoparticles by the hydrolysis of a Cu(i)-triethylamine [Cu(i)-TEA] complex at low temperature. The oxygen vacancies in these Cu2O nanoparticles led to a significant increase in the lifetimes of photogenerated charge carriers upon excitation with visible light. This, in combination with a suitable energy band structure, allowed Cu2O nanoparticles to exhibit outstanding photoactivity in visible light through the generation of electron-mediated hydroxyl (OH˙) radicals. This study highlights the significance of oxygen defects in enhancing the photocatalytic performance of promising semiconductor photocatalysts.

A simple way to synthesize large-scale Cu2O/Ag nanoflowers for ultrasensitive surface-enhanced Raman scattering detection

Here, we report a simple strategy to prepare highly sensitive surface-enhanced Raman spectroscopy (SERS) substrates based on Ag decorated Cu₂O nanoparticles by combining two common techniques, viz, thermal oxidation growth of Cu₂O nanoparticles and magnetron sputtering fabrication of a Ag nanoparticle film. Methylene blue is used as the Raman analyte for the SERS study, and the substrates fabricated under optimized conditions have very good sensitivity (analytical enhancement factor ∼10⁸), stability, and reproducibility. A linear dependence of the SERS intensities with the concentration was obtained with an R ² value >0.9. These excellent properties indicate that the substrate has great potential in the detection of biological and chemical substances.

High performance heterojunction photocatalytic membranes formed by embedding Cu2O and TiO2nanowires in reduced graphene oxide

We reported a facile approach to fabricate Cu₂O/TiO₂/rGO heterojunction membranes with superior photocatalytic efficiency and significantly improved photocorrosion resistance.

Propitious Dendritic Cu2O-Pt Nanostructured Anodes for Direct Formic Acid Fuel Cells

This study introduces a novel competent dendritic copper oxide-platinum nanocatalyst (nano-Cu₂O-Pt) immobilized onto a glassy carbon (GC) substrate for formic acid (FA) electro-oxidation (FAO); the prime reaction in the anodic compartment of direct formic acid fuel cells (DFAFCs). Interestingly, the proposed catalyst exhibited an outstanding improvement for FAO compared to the traditional platinum nanoparticles (nano-Pt) modified GC (nano-Pt/GC) catalyst. This was evaluated from steering the reaction mechanism toward the desired direct route producing carbon dioxide (CO₂); consistently with mitigating the other undesired indirect pathway producing carbon monoxide (CO); the potential poison deteriorating the catalytic activity of typical Pt-based catalysts. Moreover, the developed catalyst showed a reasonable long-term catalytic stability along with a significant lowering in onset potential of direct FAO that ultimately reduces the polarization and amplifies the fuel cell's voltage. The observed catalytic enhancement was believed to originate bifunctionally; while nano-Pt represented the base for the FA adsorption, nanostructured copper oxide (nano-Cu₂O) behaved as a catalytic mediator facilitating the charge transfer during FAO and providing the oxygen atmosphere inspiring the poison's (CO) oxidation at relatively lower potential. Surprisingly, moreover, nano-Cu₂O induced a surface retrieval of nano-Pt active sites by capturing the poisoning CO via "a spillover mechanism" to renovate the Pt surface for the direct FAO. Finally, the catalytic tolerance of the developed catalyst toward halides' poisoning was discussed.

Fabrication of Ag-Cu2O/Reduced Graphene Oxide Nanocomposites as Surface-Enhanced Raman Scattering Substrates for in Situ Monitoring of Peroxidase-Like Catalytic Reaction and Biosensing

Highly sensitive biosensors are essential in medical diagnostics, especially for monitoring the state of an individual's disease. An ideal way to achieve this objective is to analyze human sweat secretions by noninvasive monitoring. Due to low concentrations of target analytes in human secretions, fabrication of ultrasensitive detection devices is a great challenge. In this work, Ag-Cu₂O/reduced graphene oxide (rGO) nanocomposites were prepared by a facile two-step in situ reduction procedure at room temperature. Ag-Cu₂O/rGO nanocomposites possess intrinsic peroxidase-like activity and rapidly catalyze oxidation of the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. On the basis of the excellent SERS properties and high peroxidase-like activity of the Ag-Cu₂O/rGO nanocomposites, the catalytic oxidation of TMB can be monitored by SERS. This approach can detect H₂O₂ and glucose with high sensitivity and distinguish between diabetic and normal individuals using glucose levels in fingerprints. Our work provides direction for designing other SERS substrates with high catalytic activity and the potential for application in biosensing, forensic investigation, and medical diagnostics.

Plasmonic-induced SERS enhancement of shell-dependent Ag@Cu2O core–shell nanoparticles

In this study, we designed shell-dependent Ag@Cu₂O core–shell nanoparticles (NPs) for SERS study. Compared to Cu₂O NPs, Ag@Cu₂O core–shell NPs exhibited high SERS activity because of the localized surface plasmon resonance (LSPR) from Ag core.

Indirect Phase Transformation of CuO to Cu2O on a Nanowire Surface

The reduction of CuO nanowires (NWs) to Cu2O NWs undergoes an indirect phase transformation on the surface: from single crystalline CuO, to a disordered Cu2-δO phase, and then to crystalline Cu2O. A 9-12 nm disordered Cu2-δO is formed on the NW surface by exposing CuO NWs to CO at 1 Torr, 300 °C for 30 min. After 60 min, this layer decreases to 2-3 nm and is eliminated after 180 min. Energy dispersive X-ray spectroscopy using a scanning tunneling electron microscope and across a single NW reveals the disordered layer to be O-rich with respect to Cu2O with a maximum at. % Cu:O = 1.8. X-ray photoelectron spectroscopy shows adsorbed CO on the surface as evidence of the reduction reaction. Micro-Raman spectroscopy tracks the transformation in NWs as a function of reduction time. A CO enabled surface reduction reaction coupled to diffusion-limited transport of "nonlattice" O to the surface is proposed as a mechanism for Cu2-δO formation. The initial buildup of out-diffusing O to the surface appears to aid the formation of the disordered surface layer. The transformation follows Ostwald-Lussac's law which predicts formation of unstable phases over stable phases, when phase transformation rates are limited by kinetic or diffusional processes. The study provides a generalized approach for facile growth of few nanometer transient layers on multivalent, metal oxide NW surfaces.

Solvothermal synthesis of CuO–MgO nanocomposite particles and their catalytic applications

CuO–MgO nanocomposites were prepared by a solvothermal procedure.

Recent advances in hybrid Cu2O-based heterogeneous nanostructures

Hybrid Cu2O-based heterogeneous nanostructures possess novel synergistic properties that arise from the integrated interaction between the disparate components, thereby showing promising potential for various important applications including solar cells, carbon monoxide oxidation, photocatalysts, field emission, sensors, templates and so on. With the rapid progress in nanomaterials science and nanotechnology, hybrid Cu2O-based heterogeneous nanostructures with well-controlled compositions, shapes and sizes have been rationally designed and synthesized. This review attempts to summarize the important advances in the development of different types of hybrid Cu2O-based heterogeneous nanostructures, such as hybrid Cu2O-metal nanostructures, hybrid Cu2O-metal oxide nanostructures and hybrid Cu2O-carbon nanostructures. The correlations between the improved performances and interfacial structures of the hybrid Cu2O-based heterogeneous nanostructures are discussed based on some important and representative examples. Several key scientific issues and perspective research directions in this field are also given.

Novel thermo-sensitive hydrogels containing polythioether dendrons: facile tuning of LCSTs, strong absorption of Ag ions, and embedment of smaller Ag nanocrystals

Polythioether dendrons made tuning of the LCST of a thermo-sensitive hydrogel facile and the size of loaded Ag nanocrystals much smaller.

Quantitative SERS detection of low-concentration aromatic polychlorinated biphenyl-77 and 2,4,6-trinitrotoluene

This paper reports a simple label-free high-sensitive method for detecting low-concentration persistent organic pollutants and explosive materials. The proposed method combines surface-enhanced Raman spectroscopy (SERS) and magnetomotive enrichment of the target molecules on the surface of Ag nanoparticles (NPs). This structure can be achieved through self-assembling integration of Ag NPs with ferromagnetic Fe3O4 microspheres, forming a hybrid SERS nanoprobe with both optical and magnetic properties. Moreover, the magnetic response of ferromagnetic Fe3O4 microspheres can be used to dynamically modulate the optical property of Ag NPs through controlling their geometric arrangement on the substrate by applying an external magnetic field. It is also demonstrated from the full-wave numerical simulation results that the maximum electromagnetic field enhancement can be greatly increased by shortening the distance of neighboring Ag NPs and therefore resulting in an improved SERS detecting limit. More importantly, by using the prepared substrate, the SERS signals from organic pollution substances, i.e. aromatic polychlorinated biphenyl-77 and 2,4,6-trinitrotoluene, were quantitatively analyzed.

Porous-structured Cu2O/TiO2 nanojunction material toward efficient CO2 photoreduction

Porous-structured Cu2O/TiO2 nanojunction material is successfully fabricated by a facile method via loading Cu2O nanoparticles on the network of a porous TiO2 substrate. The developed Cu2O/TiO2 nanojunction material has a size of several nanometers, in which the p-type Cu2O and n-type TiO2 nanoparticles are closely contacted with each other. The well designed nanojunction structure is beneficial for the charge separation in the photocatalytic reaction. Meanwhile, the porous structure of the Cu2O/TiO2 nanojunction can facilitate the CO2 adsorption and offer more reaction active sites. Most importantly, the gas-phase CO2 photoreduction tests reveal that our developed porous-structured Cu2O/TiO2 nanojunction material exhibits marked photocatalytic activity in the CH4 evolution, about 12, 9, and 7.5 times higher than the pure TiO2, Pt-TiO2, and commercial Degussa P25 TiO2 powders, respectively. The greatly enhanced activity can be attributed to the well designed nanojunction structure combined with the porous structure, which can simultaneously enhance the charge separation efficiency and facilitate the CO2 adsorption.

Water dispersible Ag@polyaniline-pectin as supercapacitor electrode for physiological environment

We report the synthesis of a water dispersible Ag@PANI-PEC nanocomposite which exhibits electroactivity, biocompatibility, antibacterial properties and the ability to work as a supercapacitor electrode in a physiological environment.