Enhanced Structural, Optical, Electrical, and Dielectric Properties of PVA/Cu Nanocomposites for Potential Applications in Flexible Electronics

Copper (Cu) nanoparticles, known for their high electrical conductivity and cost-effectiveness, have emerged as essential materials in various applications from flexible electronics to antimicrobial agents. This work focuses on the synthesis and characterization of semiconductive nanostructured films composed of polyvinyl alcohol (PVA) with embedded Cu nanoparticles. The study provides a comprehensive analysis of the structural, optical, electrical, and dielectric properties of the resulting nanocomposites. The results indicate a significant reduction in optical band gap, from 4.82 eV in pure PVA to 2.6-2.8 eV in the nanocomposites, alongside enhanced electrical conductivities reaching 1.20 S/cm for films with 5 wt.% Cu. Dielectric assessments further reveal high dielectric constants, underscoring the potential of these materials for flexible electronic applications. This work highlights the effectiveness of incorporating Cu nanoparticles into polymer matrices, paving the way for advanced materials that meet the demands of next-generation electronics.

Sustainable catalysts in a short time: harnessing bacteria for swift palladium nanoparticle production

Adapting biological systems for nanoparticle synthesis opens an orthogonal Green direction in nanoscience by reducing the reliance on harsh chemicals and energy-intensive procedures. This study addresses the challenge of efficient catalyst preparation for organic synthesis, focusing on the rapid formation of palladium (Pd) nanoparticles using bacterial cells as a renewable and eco-friendly support. The preparation of catalytically active nanoparticles on the bacterium Paracoccus yeei VKM B-3302 represents a more suitable approach to increase the reaction efficiency due to its resistance to metal salts. We introduce an efficient method that significantly reduces the preparation time of Pd nanoparticles on Paracoccus yeei bacteria to only 7 min, greatly accelerating the process compared with traditional methods. Our findings reveal the major role of live bacterial cells in the formation and stabilization of Pd nanoparticles, which exhibit high catalytic activity in the Mizoroki-Heck reaction. This method not only ensures high yields of the desired product but also offers a greener and more sustainable alternative to conventional catalytic processes. The rapid preparation and high efficiency of this biohybrid catalyst opens new perspectives for the application of biosupported nanoparticles in organic synthesis and a transformative sustainable pathway for chemical production processes.

Antifungal activity of copper oxide nanoparticles derived from Zizyphus spina leaf extract against Fusarium root rot disease in tomato plants

Incorporating green chemistry concepts into nanotechnology is an important focus area in nanoscience. The demand for green metal oxide nanoparticle production has grown in recent years. The beneficial effects of using nanoparticles in agriculture have already been established. Here, we highlight some potential antifungal properties of Zizyphus spina leaf extract-derived copper oxide nanoparticles (CuO-Zs-NPs), produced with a spherical shape and defined a 13-30 nm particle size. Three different dosages of CuO-Zs-NPs were utilized and showed promising antifungal efficacy in vitro and in vivo against the selected fungal strain of F. solani causes tomato root rot disease, which was molecularly identified with accession number (OP824846). In vivo  results indicated that, for all CuO-Zs-NPs concentrations, a significant reduction in Fusarium root rot disease occurred between 72.0 to 88.6% compared to 80.5% disease severity in the infected control. Although treatments with either the chemical fungicide (Kocide 2000) showed a better disease reduction and incidence with (18.33% and 6.67%) values, respectively, than CuO-Zs-NPs at conc. 50 mg/l, however CuO-Zs-NPs at 250 mg/l conc. showed the highest disease reduction (9.17 ± 2.89%) and lowest disease incidence (4.17 ± 3.80%). On the other hand, CuO-Zs-NPs at varied values elevated the beneficial effects of tomato seedling vigor at the initial stages and plant growth development compared to either treatment with the commercial fungicide or Trichoderma Biocide. Additionally, CuO-Zs-NPs treatments introduced beneficial results for tomato seedling development, with a significant increase in chlorophyll pigments and enzymatic activity for CuO-Zs-NPs treatments. Additionally, treatment with low concentrations of CuO-Zs-NPs led to a rise in the number of mature pollen grains compared to the immature ones.  however the data showed that CuO-Zs-NPs have a unique antifungal mechanism against F. solani, they  subsequently imply that CuO-Zs-NPs might be a useful environmentally friendly controlling agent for the Fusarium root rot disease that affects tomato plants.

Insight into the Role of Conductive Polypyrrole Coated on Rice Husk-Derived Nanosilica-Reduced Graphene Oxide as the Anodes: Electrochemical Improvement in Sustainable Lithium-Ion Batteries

Polypyrrole (PPy) is a type of conducting polymer that has garnered attention as a potential electrode material for sustainable energy storage devices. This is mostly attributed to its mechanical flexibility, ease of processing, and ecologically friendly nature. Here, a polypyrrole-coated rice husk-derived nanosilica-reduced graphene oxide nanocomposite (SiO2-rGO@PPy) as an anode material was developed by a simple composite technique followed by an in situ polymerization process. The architecture of reduced graphene oxide offers a larger electrode/electrolyte interface to promote charge-transfer reactions and provides sufficient space to buffer a large volume expansion of SiO2, maintaining the mechanical integrity of the overall electrode during the lithiation/delithiation process. Moreover, the conducting polymer coating not only improves the capacity of SiO2, but also suppresses the volume expansion and rapid capacity fading caused by serious pulverization. The present anode material shows a remarkable specific reversible capacity of 523 mAh g-1 at 100 mA g-1 current density and exhibits exceptional discharge rate capability. The cycling stability at a current density of 100 mA g-1 shows 81.6% capacity retention and high Coulombic efficiency after 250 charge-discharge cycles. The study also pointed out that this method might be able to be used on a large scale in the lithium-ion battery industry, which could have a big effect on its long-term viability. Creating sustainable nanocomposites is an exciting area of research that could help solve some of the biggest problems with lithium-ion batteries, like how easy they are to make and how big they can be used in industry. This is because they are sustainable and have less of an impact on the environment.

Nanoarchitected graphene/copper oxide nanoparticles/MoS2 ternary thin films as highly efficient electrodes for aqueous sodium-ion batteries

Sodium-ion batteries (SIBs) operating in aqueous electrolyte are an emerging technology that promises to be safer, cheaper, more sustainable and more efficient than their lithium-based counterparts. One of the great challenges associated with this technology is the development of advanced materials with high specific capacity to be used as electrodes. Herein, we describe an ingenious strategy to prepare unprecedented tri-component nanoarchitected thin films with superior performance when applied as anodes in aqueous SIBs. Taking advantage of the broadness and versatility of the liquid-liquid interfacial route, three transparent nanocomposite films comprising graphene, molybdenum sulphide and copper oxide nanoparticles have been prepared. The samples were characterized using several techniques, and the results demonstrated that depending on the specific experimental strategy, different nanoarchitectures are achieved, resulting in different and improved properties. An astonishing capacity of 1377 mA h g-1 at 0.1 A g-1 and a degree of recovery of 100% were observed for the film in which the interactions among the components were optimized. This is among the highest capacity values reported in the literature and demonstrates the potential of these tri-component materials to be used as anodes in aqueous sodium-ion batteries.

A Review on Graphene (GN) and Graphene Oxide (GO) Based Biodegradable Polymer Composites and Their Usage as Selective Adsorbents for Heavy Metals in Water

Water pollution due to heavy metal ions has become a persistent and increasing problem globally. To combat this, carbonaceous materials have been explored as possible adsorbents of these metal ions from solution. The problem with using these materials on their own is that their lifespan and, therefore, usability is reduced. Hence the need to mask them and an interest in using polymers to do so is picked. This introduces an improvement into other properties as well and opens the way for more applications. This work gives a detailed review of the major carbonaceous materials, graphene and graphene oxide, outlining their origin as well as morphological studies. It also outlines the findings on their effectiveness in removing heavy metal ions from water, as well as their water absorption properties. The section further reports on graphene/polymer and graphene oxide/polymer composites previously studied and their morphological as well as thermal properties. Then the work done in the absorption and adsorption capabilities of these composites is explored, thereby contrasting the two materials. This enables us to choose the optimal material for the desired outcome of advancing further in the utilization of carbonaceous material-based polymer composites to remove heavy metal ions from water.

Graphene-based materials for the adsorptive removal of uranium in aqueous solutions

Ground water contamination by radioactive elements has become a critical issue that can pose significant threats to human health. Adsorption is the most promising approach for the removal of radioactive elements owing to its simplicity, effectiveness, and easy operation. Among the plethora of functional adsorbents, graphene oxide and its derivatives are recognized for their excellent potential as adsorbent with the unique 2D structure, high surface area, and intercalated functional groups. To learn more about their practical applicability, the procedures involved in their preparation and functionalization are described with the microscopic removal mechanism by GO functionalities across varying solution pH. The performance of these adsorbents is assessed further in terms of the basic performance metrics such as partition coefficient. Overall, this article is expected to provide valuable insights into the current status of graphene-based adsorbents developed for uranium removal with a guidance for the future directions in this research field.

Rheological Behavior and Filtration of Water-Based Drilling Fluids Containing Graphene Oxide: Experimental Measurement, Mechanistic Understanding, and Modeling

Any improvement in drilling technology is critical for developing the oil and gas industry. The success of drilling operations largely depends on drilling fluid characteristics. Drilling fluids require enough viscosity to suspend the particles and transport them to the surface and enough capability to control the fluid loss into the formation. Rheology and filtration characteristics of drilling fluids are crucial factors to consider while ensuring the effectiveness of a drilling operation. Graphene oxide (GO), xanthan gum (XG), and low-viscosity carboxymethyl cellulose (CMC LV) are being utilized in this research to produce high-performance, low-solid water-based drilling fluids (WDFs). Rheological and filtration behaviors of GO/XG/CMC LV-WDF were investigated as a function of GO, XG, and CMC LV at low concentrations (0.0-0.3% w/w) and atmospheric conditions. According to the findings, GO improved the rheological and filtration capabilities of the WDF. By adding 0.15 wt % GO, shear stress could be doubled, especially at a high shear rate of 1022 s-1. The plastic viscosity of the fluid could be expanded from 6 to 13 centipoise, and a fluid loss of 8.7 mL over 30 min was observed during the API fluid test, which would be lower than the suggested fluid loss value (15.0 mL) for water-based mud. At the same concentration of XG and CMC LV, XG had a more significant influence on rheological characteristics in the presence of GO. Adding 0.3 wt % XG could increase fluid shear stress from 20.21 to 30.21 Pa at a high shear rate of 1022 s-1. In contrast, CMC LV had more impact on filtration properties, acting as a filtration control agent by decreasing the API fluid loss of fluid from 21.4 to 14.2 mL over 30 min. The addition of XG and CMC LV to the GO solution may influence the microstructure of the filter cake, resulting in a tree-root morphology. Indeed, in the GO/CMC LV solution, the individual platelets may bind together, form a jellyfish shape, and block the micropores. The incorporation of CMC LV helped develop compact filter cakes, resulting in excellent filtration. Five rheological models were employed to match the fluid parameters quantitatively. The Herschel-Bulkley model outperformed the other models in simulating fluid rheological behavior. The findings of this study can be utilize to provide low-cost, stable, and environmentally compatible additives for drilling low-pressure, depleted, and fractured oil and gas reservoirs.

Design of Metal-Organic Polymers MIL-53(M3+): Preparation and Characterization of MIL-53(Fe) and Graphene Oxide Composite

This article presents a crystal chemical analysis, generalization, and systematization of structural characteristics of metal-organic polymers MIL-53(M3+) with M = Al, Cr, Ga, and Fe. The division of the MIL-53(M3+) structures into a morphotropic series was performed, which made it possible to predict the formation of new compounds or solid solutions with the corresponding composition and structure. The change in the symmetry of MIL-53(M3+) and the causes of polymorphs formation are explained on the basis of crystal chemical rules. The efficiency of the revealed regularities in the structural characteristics of the MIL-53(M3+) phases were experimentally confirmed for MIL-53(Fe) and composite MIL-53(Fe)/GO (GO-graphene oxide) by several methods (powder X-ray, X-ray absorption, and photoelectron spectroscopy). For the first time, different coordination numbers (CN) (CNFe = 4.9 for MIL-53(Fe)—two types of coordination polyhedra with CNFe = 6 and CNFe = 4; CNFe = 4 for MIL-53 (Fe3+)/GO) and the formal charges (FC) of iron ions (variable FC of Fe (2+δ)+ in MIL-53(Fe3+) and Fe2+ in MIL-53(Fe3+)/GO) were found. These experimental data explain the higher photocatalytic activity of MIL-53(Fe3+)/GO in photo-Fenton reactions—RR195 decomposition.

Nanocellulose-Graphene Derivative Hybrids: Advanced Structure-Based Functionality from Top-down Synthesis to Bottom-up Assembly

There is an emerging endeavor of advanced structure-based functionality in the next-generation advanced functional materials inspired by hierarchical architecture for future technical applications. This review provides an impressive range roadmap for constructing advanced functional materials based on the nanocellulose-graphene derivative hybrids, from the top-down synthesis of their hierarchical materials to the bottom-up assembly of their nanoscale building blocks. First, the roadmap started from the top-down synthesis routes of nanocellulose-graphene hierarchical materials into their derivatives, where the pristine properties of nanoscale building blocks are still accessible and processable. Then, the stable-strong synergistic interfacial interactions between nanocellulose chains and graphene derivative nanosheets are uniquely well-suited in this roadmap for constructing scalable hybrid materials with interesting emergent properties. After that, the roadmap presented the bottom-up assembly approaches of these versatile nanoscale building blocks through self-assembly, templating, and mimicking of the bioinspired hierarchical structures toward advanced functional materials. Thereafter, toward understanding the specificity, superiority, and functionality of such hybrid materials, the roadmap discussed the properties and potential applications so far. Finally, the roadmap pointed out the key challenges and future outlooks, paving the way for comprehensive understanding and ideal designing of hybrid structures from nanocellulose and graphene derivatives.

Bioactive Hydrogels: Design and Characterization of Cellulose-Derived Injectable Composites

Cellulose represents a low cost, abundant, and renewable polysaccharide with great versatility; it has a hierarchical structure composed of nanofibers with high aspect ratio (3–4 nm wide, hundreds of μm long). TEMPO-mediated oxidation represents one of the most diffused methods to obtain cellulose nanofibers (CNFs): It is possible to obtain physically crosslinked hydrogels by means of divalent cation addition. The presence of inorganic components, such as calcium phosphates (CaP), can improve not only their mechanical properties but also the bioactivity of the gels. The aim of this work is to design and characterize a TEMPO-oxidized cellulose nanofibers (TOCNFs) injectable hydrogel embedded with inorganic particles, CaP and CaP-GO, for bone tissue regeneration. Inorganic particles act as physical crosslinkers, as proven by rheological characterization, which reported an increase in mechanical properties. The average load value registered in injection tests was in the range of 1.5–4.4 N, far below 30 N, considered a reasonable injection force upper limit. Samples were stable for up to 28 days and both CaP and CaP-GO accelerate mineralization as suggested by SEM and XRD analysis. No cytotoxic effects were shown on SAOS-2 cells cultured with eluates. This work demonstrated that the physicochemical properties of TOCNFs-based dispersions could be enhanced and modulated through the addition of the inorganic phases, maintaining the injectability and bioactivity of the hydrogels.

Nanocellulose-Graphene Hybrids: Advanced Functional Materials as Multifunctional Sensing Platform

Naturally derived nanocellulose with unique physiochemical properties and giant potentials as renewable smart nanomaterials opens up endless novel advanced functional materials for multi-sensing applications. However, integrating inorganic functional two-dimensional carbon materials such as graphene has realized hybrid organic-inorganic nanocomposite materials with precisely tailored properties and multi-sensing abilities. Altogether, the affinity, stability, dispersibility, modification, and functionalization are some of the key merits permitting their synergistic interfacial interactions, which exhibited highly advanced multifunctional hybrid nanocomposites with desirable properties. Moreover, the high performance of such hybrids could be achievable through green and straightforward approaches. In this context, the review covered the most advanced nanocellulose-graphene hybrids, focusing on their synthetization, functionalization, fabrication, and multi-sensing applications. These hybrid films exhibited great potentials as a multifunctional sensing platform for numerous mechanical, environmental, and human bio-signals detections, mimicking, and in-situ monitoring.

Graphene oxide decorated with cellulose and copper nanoparticle as an efficient adsorbent for the removal of malachite green

In this study, the graphene oxide surface was modified by grafting of nanocellulose and copper nanoparticles to promote the surface charge and adsorption efficiency for malachite green (MG). The structural and configurational properties of GO-CEL-Cu were verified by UV/Vis, SEM, TEM, EDX and FTIR spectroscopy and confirmed the electrostatic interaction and hydrogen bonding between GO, CEL and Cu-NPs. TEM images confirmed the deposition of Cu-NPs size between 24 and 37 nm on the GO surface. The uniform fine particles size makes strong interfacial interaction with GO sheets result in efficient load transfer from the matrix to the hybrid. The variable parameters such as adsorbent amount, MG concentration, pH, time and temperature were investigated to achieve optimum experimental condition. The experimental data was justified by Langmuir isotherm model with adsorption capacity for GO, GO-Cu, GO-CEL, GO-CEL-Cu as 127.3, 149.2, 156.8 and 207.1 mg/g, respectively. The spontaneity and endothermic nature of the process were confirmed by negative Gibbs free energy and followed the pseudo-second-order rate equation. Additionally, positive values of enthalpy and entropy suggesting endothermic process and increase randomness during process, respectively. In conclusion, nanocomposite is capable to adsorb the toxic dye due to its well economic, eco-friendly, well adsorption rate and regeneration ability.

Graphene Oxide-Coated Gold Nanorods: Synthesis and Applications

The application of gold nanorods (AuNRs) and graphene oxide (GO) has been widely studied due to their unique properties. Although each material has its own challenges, their combination produces an exceptional material for many applications such as sensor, therapeutics, and many others. This review covers the progress made so far in the synthesis and application of GO-coated AuNRs (GO-AuNRs). Initially, it highlights different methods of synthesizing AuNRs and GO followed by two approaches (ex situ and in situ approaches) of coating AuNRs with GO. In addition, the properties of GO-AuNRs composite such as biocompatibility, photothermal profiling, and their various applications, which include photothermal therapy, theranostic, sensor, and other applications of GO-AuNRs are also discussed. The review concludes with challenges associated with GO-AuNRs and future perspectives.

Electrospun Composites Made of Reduced Graphene Oxide and Polyacrylonitrile-Based Activated Carbon Nanofibers (rGO/ACNF) for Enhanced CO2 Adsorption

In this work, we report the preparation of polyacrylonitrile (PAN)-based activated carbon nanofibers composited with different concentrations of reduced graphene oxide (rGO/ACNF) (1%, 5%, and 10% relative to PAN weight) by a simple electrospinning method. The electrospun nanofibers (NFs) were carbonized and physically activated to obtain activated carbon nanofibers (ACNFs). Texture, surface and elemental properties of the pristine ACNFs and composites were characterized using various techniques. In comparison to pristine ACNF, the incorporation of rGO led to changes in surface and textural characteristics such as specific surface area (S_BET), total pore volume (V_total), and micropore volume (V_micro) of 373 m²/g, 0.22 cm³/g, and 0.15 cm³/g, respectively, which is much higher than the pristine ACNFs (e.g., S_BET = 139 m²/g). The structural and morphological properties of the pristine ACNFs and their composites were studied by Raman spectroscopy and X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM) respectively. Carbon dioxide (CO₂) adsorption on the pristine ACNFs and rGO/ACNF composites was evaluated at different pressures (5, 10, and 15 bars) based on static volumetric adsorption. At 15 bar, the composite with 10% of rGO (rGO/ACNF0.1) that had the highest S_BET, V_total, and V_micro, as confirmed with BET model, exhibited the highest CO₂ uptake of 58 mmol/g. These results point out that both surface and texture have a strong influence on the performance of CO₂ adsorption. Interestingly, at p < 10 bar, the adsorption process of CO₂ was found to be quite well fitted by pseudo-second order model (i.e., the chemisorption), whilst at 15 bar, physisorption prevailed, which was explained by the pseudo-first order model.

Synthesis of Graphene Oxide Using Atmospheric Plasma for Prospective Biological Applications

INTRODUCTION

This paper presents a novel technique for the synthesis of graphene oxide (GO) with various surface features using high-density atmospheric plasma deposition. Furthermore, to investigate the use of hydrophobic, super-hydrophobic, and hydrophilic graphene in biological applications, we synthesized hydrophobic, super-hydrophobic, and hydrophilic graphene oxides by additional heat treatment and argon plasma treatment, respectively. In contrast to conventional fabrication procedures, reduced graphene oxide (rGO) formed under low pressure and high-temperature environment using a new synthesis method-developed and described in this study-offers a convenient deposition method on any kind surface with controlled wettability.

METHODS

High density at atmospheric plasma is used for the synthesis of rGO and GO and its biocompatibility based on various wetting properties was evaluated using MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, and the viability of cells in response to rGO and GO with various surface features was investigated. Structural integrity was characterized by Raman spectroscopy, FESEM and FE-TEM. Wettability was measured via contact angle method and confirmed with XPS analysis.

RESULTS

We found that GO coating with a hydrophilic feature is more biocompatible than other surfaces as observed in case of fibroblast cells. We have shown that wettability-controlled by GO deposition-influences biocompatibilities and antibacterial effect of biomaterial surfaces.

DISCUSSION

Measuring the contact angle, it is found that contact angle for hydrophobic is increased to 150.590 and reduced to 11.580 by heat and argon plasma treatment, respectively, from 75.880 that was initially in the case of hydrophobic surface. XPS analysis confirmed various oxygen-containing functional groups transforming as deposited hydrophobic surface into superhydrophobic and hydrophilic surface. Thus, we have proposed a new, direct, cost-effective, and highly productive method for the synthesis of rGO and GO-with various surface properties-for biological applications. Similarly, for the dental implant application, the Streptococcus mutans was used as an antibacterial effect and found that S. mutans grows slowly on hydrophilic surface. Thus, antibacterial effect was prominent on GO with hydrophilic surface.

Reduced Graphene Oxide/Poly(Pyrrole-co-Thiophene) Hybrid Composite Materials: Synthesis, Characterization, and Supercapacitive Properties

Reduced graphene oxide/poly(pyrrol-co-thiophene) (RGO/COP), prepared by facile in-situ oxidative copolymerization, is reported as a new hybrid composite material with improved supercapacitance performance as compared to the respective homopolymers and their composites with RGO. The as-prepared hybrid materials were characterized with ultraviolet-visible (UV-Vis) spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) analysis. The electrochemical behavior and energy storage properties of the materials were tested by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), and electrostatic impedance spectroscopy (EIS) techniques in 0.5 M H2SO4. The specific capacitance (Csp) for RGO/COP calculated from the CV curve was 467 F/g at a scan rate of 10 mV/s. While the Csp calculated from the GCD was 417 F/g at a current density of 0.81 A/g. The energy density calculated was 86.4 Wh/kg with a power density of 630 W/kg. The hybrid composite exhibits good cyclic stability with 65% capacitance retention after 1000 cycles at a scan rate of 100 mV/s. The present work brings a significance development of RGO/COP composites to the electrode materials for pseudocapacitive application.

Synthesis of ZnO/Fe3O4/rGO nanocomposites and evaluation of antibacterial activities towards E. coli and S. aureus

Antibacterial activity of nanoparticles (NPs) and nanocomposites (NCs) has received wide spread attention in biomedical applications. In this direction, the authors prepared zinc oxide (ZnO), iron oxide (Fe3O4), and their composite including reduced graphene oxide (rGO) by hydrothermal method. The structural and microstructural properties of the synthesised NPs and NCs were investigated by XRD, FT-IR, UV-Vis, TGA, and TEM analysis. PEG-coated ZnO and Fe3O4 form in hexagonal wurtzite and inverse spinel structures, respectively. ZnO forms in rod-shaped (aspect ratio of ∼3) morphology, whereas well-dispersed spherical-shaped morphology of ∼10 nm is observed in Fe3O4 NPs. The ZnO/Fe3O4 composite possesses a homogeneous distribution of above two phases and shows a very good colloidal stability in aqueous solvent. These synthesised particles exhibited varying antibacterial activity against gram-positive strain Staphylococcus aureus (S. aureus) and gram-negative strain Escherichia coli (E. coli). The nanocomposite exhibits a better cidal effect on E. coli when compared to S. aureus when treated with 1 mg/ml concentration. Further, the addition of rGO has intensified the anti-bacterial effect to a much higher extent due to synergistic influence of individual components.

Biosynthesis of copper nanoparticles using aqueous Tilia extract: antimicrobial and anticancer activities

A cost-effective method for the biosynthesis of copper nanoparticles (Cu-NPLs) using Tilia extract under optimum conditions has been presented. The use of Tilia extracts for the synthesis of Cu-NPLs has been investigated for the first time. The Cu-NPLs are stable due to in situ bio-capping by the Tilia extract residues. Formation of metallic Cu was revealed by UV-vis and XRD analyses. UV-vis of Cu-NPLs showed an SPR characteristic peak at 563 nm (energy bandgap = 2.1 eV). Morphology and size of the as-prepared Cu-NPLs were determined using SEM and TEM studies. TEM observations show that the produced Cu-NPLs are hemispherical in shape with different diameters in the range 4.7-17.4 nm. The electrical conductivity of the Cu-NPLs was determined as 1.04 × 10-6 S cm-1 (at T = 120 K). The antimicrobial studies exhibited relatively high activity against pathogenic bacteria like Gram-positive & Gram-negative bacteria. Anticancer studies demonstrated the in vitro cytotoxicity value of Cu-NPLs against tested human colon cancer Caco-2 cells, human hepatic cancer HepG2 cells and human breast cancer Mcf-7 cells. To conclude, Cu-NPLs are promising in electronic devices and they possess a potential anticancer application for some human cancer therapy as well.

Advanced Functional Nanomaterials for Theranostics

Nanoscale materials have been explored extensively as agents for therapeutic and diagnostic (i.e. theranostic) applications. Research efforts have shifted from exploring new materials in vitro to designing materials that function in more relevant animal disease models, thereby increasing potential for clinical translation. Current interests include non-invasive imaging of diseases, biomarkers and targeted delivery of therapeutic drugs. Here, we discuss some general design considerations of advanced theranostic materials and challenges of their use, from both diagnostic and therapeutic perspectives. Common classes of nanoscale biomaterials, including magnetic nanoparticles, quantum dots, upconversion nanoparticles, mesoporous silica nanoparticles, carbon-based nanoparticles and organic dye-based nanoparticles, have demonstrated potential for both diagnosis and therapy. Variations such as size control and surface modifications can modulate biocompatibility and interactions with target tissues. The needs for improved disease detection and enhanced chemotherapeutic treatments, together with realistic considerations for clinically translatable nanomaterials will be key driving factors for theranostic agent research in the near future.

The influence of carbon surface chemistry on supported palladium nanoparticles in heterogeneous reactions

The surface chemistry of nanocarbon support can tailor chemical properties of precious metal nanoparticle/nanocarbon hybrid catalyst in heterogeneous reactions. We report on modified reduced graphene oxide (rGO) support with ionic liquid-derived carbonaceous surface for palladium nanoparticle (Pd NPs) decoration and their actions in different heterogeneous reactions. The surface chemistry of support materials was characterized in detail, and the influence of which on the formation and distribution of metal particles was further investigated. Three different types of reactions including Suzuki-Miyaura coupling reaction, CO oxidation and phenol reduction were examined in terms of reactivity and selectivity. The roles of substituted nitrogen in graphitic lattice and grafted groups on the carbon surface were exploited. Nitrogen-doping can give rise to changes in electronic properties of supported metals, and the Lewis basicity of the doped nitrogen atoms can favor the adsorption of acidic reactants in phenol reduction. The grafted groups derived a negative impact to the Suzuki-Miyaura coupling reaction, due to the involvement of larger reactant molecules, despite that they could prevent significant sintering of Pd NPs in the CO oxidation.

Reduced graphene oxide-stabilized copper nanocrystals with enhanced catalytic activity and SERS properties

The as-obtained Cu/rGO hybrids possess excellent air stability, a higher catalytic efficiency to the reduction of p-nitrophenol and exhibit surface-enhanced Raman scattering activity.

Efficient and recyclable copper-based MOF-catalyzed N-arylation of N-containing heterocycles with aryliodides

Copper-based MOF-199 was used as an efficient heterogeneous catalyst to catalyze cross-coupling reactions between N-containing heterocycles and aryliodides with high yields.

Tamarix gallica leaf extract mediated novel route for green synthesis of CuO nanoparticles and their application for N-arylation of nitrogen-containing heterocycles under ligand-free conditions

We report the green synthesis of CuO nanoparticles (CuO NPs) using Tamarix gallica leaf extract and their catalytic activity for N-arylation of nitrogen-containing heterocycles with aryl halides under ligand-free conditions.

Copper nanoparticle/carbon quantum dots hybrid as green photocatalyst for high-efficiency oxidation of cyclohexane

Cu/CQDs hybrids as photocatalysts exhibit efficient photocatalytic activity in the oxidation of cyclohexane under visible light and mild conditions.

Graphene/cotton composite fabrics as flexible electrode materials for electrochemical capacitors

Graphene/cotton composite fabrics were successfully synthesized via a facile “dipping and drying” process followed by a NaBH₄ reduction method.