An electrochemical aptasensor based on a TiO2/three-dimensional reduced graphene oxide/PPy nanocomposite for the sensitive detection of lysozyme

Advances in novel biosensors in biomedical applications

Biosensors, devices capable of detecting biomolecules or bioactive substances, have recently become one of the important tools in the fields of bioanalysis and medical diagnostics. A biosensor is an analytical system composed of biosensitive elements and signal-processing elements used to detect various biological and chemical substances. Biomimetic elements are key to biosensor technology and are the components in a sensor that are responsible for identifying the target analyte. The construction methods and working principles of biosensors based on synthetic biomimetic elements, such as DNAzyme, molecular imprinted polymers and aptamers, and their updated applications in biomedical analysis are summarised. Finally, the technical bottlenecks and future development prospects for biomedical analysis are summarised and discussed.

Enhanced sensing of bacteria biomarkers by ZnO and graphene oxide decorated PEDOT film

Developing a biofilm biomarker detector and inhibitor will immensely benefit efforts geared at curbing infectious diseases and microbiologically induced corrosion of medical implants, marine vessels and buried steel pipelines. N-Acyl homoserine lactones (AHLs) are important biomarkers gram-negative bacteria use for communication. In this work, we investigated the interactions between three AHL molecules and graphene oxide (GO) and ZnO nanomaterials embedded in conjugated poly(3,4-ethylenedioxythiophene) (PEDOT) film. The results show that PEDOT/GO/ZnO detected AHLs to a considerable extent with adsorption enthalpies of -4.02, -4.87 and -4.97 KJ/mol, respectively, for N-(2-oxotetrahydrofuran-3-yl)heptanamide (AHL1), 2-hydroxy-N-(2-oxotetrahydrofuran-3-yl)nonanamide (AHL2) and (E)-3-(3-hydroxyphenyl)-N-(2-oxotetrahydrofuran-3-yl)acrylamide (AHL3) molecules. The ZnO nanoparticles facilitated charge redistribution and transfer, thereby enhancing the conductivity and overall sensitivity of the substrate toward the AHLs. The adsorption distance and sites of interactions further tuned the charge migration and signal generation by the substrate, thus affirming the suitability of the modeled thin film as a sensor material. Excellent stability and conductivity were maintained before and after the adsorption of each AHL molecule. Moreover, the desorption time for each AHL molecule was calculated, and the result affirmed that the modeled film materials are promising for developing highly sensitive biosensors.

Redox-Concatenated Aptamer Integrated Skin Mimicking Electrochemical Patch for Noninvasive Detection of Cortisol

This research focuses on developing and validating a wearable electrochemical biosensor called the concatenated aptamer integrated skin patch, also known as the Captain Patch. The main objective is to detect cortisol levels in sweat, which can provide valuable insights into an individual's health. The biosensor utilizes a corrugated surface that mimics the skin, allowing for better attachment and an improved electrochemical performance. The study demonstrates the successful application of Captain Patch on the human body by using artificially spiked sweat samples. The results indicate good measurement accuracy and conformity when the patch is worn on the body. However, for long-term usage, the patch needs to be changed every 3-4 h or worn three times a day to enable monitoring of cortisol levels. Despite the need for frequent patch changes, the cost-effectiveness and ease of operation make these skin patches suitable for longitudinal cortisol monitoring and other sweat analytes. By customization of the biorecognition probe, the developed biowearable can be used to monitor a variety of vital biomarkers. Overall, Captain Patch, with its capability of detecting specific health markers such as cortisol, hints at the future potential of wearables to offer valuable data on various other biomarkers. Our approach presents the first step in integrating a cost-effective wearable electrochemical patch integrated with a redox-concatenated aptamer for noninvasive biomarker detection. This personalized approach to monitoring can lead to improved patient outcomes and increased patient engagement in managing their health.

Conjugated Polymers for Aptasensing Applications

Rapid and specific assaying of molecules that report on a pathophysiological condition, environmental pollution, or drug concentration is pivotal for establishing efficient and accurate diagnostic systems. One of the main components required for the construction of these systems is the recognition element (receptor) that can identify target analytes. Oligonucleotide switching structures, or aptamers, have been widely studied as selective receptors that can precisely identify targets in different analyzed matrices with minimal interference from other components in an antibody-like recognition process. These aptasensors, especially when integrated into sensing platforms, enable a multitude of sensors that can outperform antibody-based sensors in terms of flexibility of the sensing strategy and ease of deployment to areas with limited resources. Research into compounds that efficiently enhance signal transduction and provide a suitable platform for conjugating aptamers has gained huge momentum over the past decade. The multifaceted nature of conjugated polymers (CPs), notably their versatile electrical and optical properties, endows them with a broad range of potential applications in optical, electrical, and electrochemical signal transduction. Despite the substantial body of research demonstrating the enhanced performance of sensing devices using doped or nanostructure-embedded CPs, few reviews are available that specifically describe the use of conjugated polymers in aptasensing. The purpose of this review is to bridge this gap and provide a comprehensive description of a variety of CPs, from a historical viewpoint, underpinning their specific characteristics and demonstrating the advances in biosensors associated with the use of these conjugated polymers.

Recent Advances, Opportunities, and Challenges in Developing Nucleic Acid Integrated Wearable Biosensors for Expanding the Capabilities of Wearable Technologies in Health Monitoring

Wearable biosensors are becoming increasingly popular due to the rise in demand for non-invasive, real-time monitoring of health and personalized medicine. Traditionally, wearable biosensors have explored protein-based enzymatic and affinity-based detection strategies. However, in the past decade, with the success of nucleic acid-based point-of-care diagnostics, a paradigm shift has been observed in integrating nucleic acid-based assays into wearable sensors, offering better stability, enhanced analytical performance, and better clinical applicability. This narrative review builds upon the current state and advances in utilizing nucleic acid-based assays, including oligonucleotides, nucleic acid, aptamers, and CRISPR-Cas, in wearable biosensing. The review also discusses the three fundamental blocks, i.e., fabrication requirements, biomolecule integration, and transduction mechanism, for creating nucleic acid integrated wearable biosensors.

Detection of Oxytetracycline Using an Electrochemical Label-Free Aptamer-Based Biosensor

One of the most effective ways to detect and measure antibiotics is to detect their biomarkers. The best biomarker for the control and detection of oxytetracycline (OTC) is the OTC-specific aptamer. In this study, a novel, rapid, and label-free aptamer-based electrochemical biosensor (electrochemical aptasensor) was designed for OTC determination based on a newly synthesized nanocomposite including multi-walled carbon nanotubes (MWCNTs), gold nanoparticles (AuNPs), reduced graphene oxide (rGO), and chitosan (CS), as well as nanosheets to modify a glassy carbon electrode, which extremely enhanced electrical conductivity and increased the electrode surface to bind well with the amine-terminated OTC-specific aptamer through self-assembly. The (MWCNTs-AuNPs/CS-AuNPs/rGO-AuNPs) nanocomposite modified electrode was synthesized using a layer- by-layer modification method which had the highest efficiency for better aptamer stabilization. Differential pulse voltammetry (DPV), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) techniques were used to investigate and evaluate the electrochemical properties and importance of the synthesized nanocomposite in different steps. The designed aptasensor was very sensitive for measuring the OTC content of milk samples, and the results were compared with those of our previously published paper. Based on the calibration curve, the detection limit was 30.0 pM, and the linear range was 1.00-540 nM for OTC. The repeatability and reproducibility of the aptasensor were obtained for 10.0 nM of OTC with a relative standard deviation (RSD%) of 2.39% and 4.01%, respectively, which were not affected by the coexistence of similar derivatives. The measurement in real samples with the recovery range of 93.5% to 98.76% shows that this aptasensor with a low detection limit and wide linear range can be a good tool for detecting OTC.

DNAzyme-Based Biosensors: Immobilization Strategies, Applications, and Future Prospective

Since their discovery almost three decades ago, DNAzymes have been used extensively in biosensing. Depending on the type of DNAzyme being used, these functional oligonucleotides can act as molecular recognition elements within biosensors, offering high specificity to their target analyte, or as reporters capable of transducing a detectable signal. Several parameters need to be considered when designing a DNAzyme-based biosensor. In particular, given that many of these biosensors immobilize DNAzymes onto a sensing surface, selecting an appropriate immobilization strategy is vital. Suboptimal immobilization can result in both DNAzyme detachment and poor accessibility toward the target, leading to low sensing accuracy and sensitivity. Various approaches have been employed for DNAzyme immobilization within biosensors, ranging from amine and thiol-based covalent attachment to non-covalent strategies involving biotin-streptavidin interactions, DNA hybridization, electrostatic interactions, and physical entrapment. While the properties of each strategy inform its applicability within a proposed sensor, the selection of an appropriate strategy is largely dependent on the desired application. This is especially true given the diverse use of DNAzyme-based biosensors for the detection of pathogens, metal ions, and clinical biomarkers. In an effort to make the development of such sensors easier to navigate, this paper provides a comprehensive review of existing immobilization strategies, with a focus on their respective advantages, drawbacks, and optimal conditions for use. Next, common applications of existing DNAzyme-based biosensors are discussed. Last, emerging and future trends in the development of DNAzyme-based biosensors are discussed, and gaps in existing research worthy of exploration are identified.

A Novel Electrochemical Sensor Based on Reduced Graphene Oxide–TiO2 Nanocomposites with High Selectivity for the Determination of Hydroxychloroquine

A simply sensitive sensor based on a reduced graphene oxide–TiO₂ nanocomposite modified glassy carbon electrode (RGO–TiO₂/GCE) was developed for the electrochemical determination of an antimalarial drug, hydroxychloroquine (HCQ). The modified electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Electrochemical test showed that the RGO–TiO₂ electrode had stronger electrochemical activity and higher effective real surface area than that of TiO₂ electrode and bare electrode. The electrochemical response of RGO–TiO₂ nanocomposite modified electrode toward HCQ oxidation was studied by CV, chronoamperometry (CHA), chronocoulometry (CHC) and square-wave voltammetry (SWV). Interestingly, RGO–TiO₂/GCE indicated an excellent electrocatalytic activity for HCQ. Under the optimal experimental conditions, a linear relationship between the peak current and the concentration was obtained, ranging from 0.25 to 500 μM, with the detection limit (S/N = 3) of 12.5 nM and quantification limit (S/N = 10) of 0.97 μM. Furthermore, the proposed sensor was successfully applied to the determination of HCQ in pharmaceutical (tablets) samples. In summary, the developed sensor was low cost and efficient, making it potentially attractive for practical sample analysis application of HCQ.

Online preconcentration of lysozyme in hen egg white using responsive polymer coating in CE

A mixed polymer brushes material based on poly (2-methyl-2-oxazoline)- and poly (acrylic acid)-coated capillary with switchable protein adsorption/desorption properties was applied for online preconcentration of lysozyme in hen egg white during capillary electrophoresis performance. First, lysozyme in simulated egg white was successfully online preconcentrated and the detection signal of lysozyme was amplified. Ovalbumin, ovomucoid, and conalbumin in egg white were verified show negligible interference on the online preconcentration of lysozyme according to the study on electroosmotic flow mobility. Second, a series validation procedure was carried out to evaluate the proposed method performance. There was a good linearity behavior range from 0.1 to 5.0 ng/mL, limit of detection was 20 pg/mL, and limit of quantity was 50 pg/mL, the accuracy and robustness of this method were also excellent. Last, the proposed method has been successfully used to detect and analyze lysozyme in hen egg white, the determined amounts of lysozyme in hen egg white were consistent with reported normal levels and recoveries were in the range of 96.0-99.2%. After 75 consecutive runs, this prepared capillary was still stable for online preconcentration and determination of lysozyme in hen egg white without being affected by complex matrix.

Graphene-family materials in electrochemical aptasensors

The study of graphene-based carbon nanocomposites has remarkably increased in recent years. Functionalized graphene-based nanostructures, including graphene oxide and reduced graphene oxide, have great potential as new innovative electrode materials in the fabrication of novel electrochemical sensors. Electrochemical sensors based on aptamers attracted great attention because of their high sensitivity and selectivity, and simple instrumentation, as well as low production cost. Aptamers as a potent alternative to antibodies are functional nucleic acids with a high tendency to specific analytes. Electrochemical aptasensors show specific recognition ability for a wide range of analytes. Although aptamers are selected in vitro in contrast to antibodies, they are interesting due to advantages like high stability, easy chemical modifications, and the potential to be employed in nanostructured device fabrication or electrochemical sensing devices. Recently, new nanomaterials have shown a significant impact on the production of electrochemical sensors with high efficiency and performance. This review aims to give an outline of electrochemical aptasensors based on the graphene family materials and discuss the detection mechanism in this type of aptasensors. The present review summarizes some of the recent achievements in graphene-based aptasensors and includes their recent electroanalytical applications. Graphical Abstract Graphical Abstract.

Recent Advances in the Construction of Flexible Sensors for Biomedical Applications

The fabrication of flexible sensors is a potential way to promote the progress of modern social science and technology due to their wide applications in high-performance electronic equipment and devices. Flexible sensors based on organic materials combine the unique advantages of flexibility and low cost, increasing interest in healthcare monitoring, treatment, and human-machine interfaces. Advances in materials science and biotechnology have rapidly accelerated the development of bio-integrated multifunctional sensors and devices. Due to their excellent mechanical and electrical properties, many types of functional materials provided benefits for the construction of various sensors with improved flexibility and stretchability. In this review, recent advance in the fabrication of flexible sensors by using functional nanomaterials including nanoparticles, carbon materials, metal-organic materials, and polymers is presented. In addition, the potential biomedical applications of the fabricated flexible sensors for detecting gas molecules signals, small molecules, DNA/RNA, proteins, others are introduced and discussed.

The development of an electrochemical nanoaptasensor to sensing chloramphenicol using a nanocomposite consisting of graphene oxide functionalized with (3-Aminopropyl) triethoxysilane and silver nanoparticles

In the present research, a nanoaptasensor is proposed for electrochemical measurement of chloramphenicol (CAP). To this purpose, the nanocomposite prepared from graphene oxide and functionalized with (3-Aminopropyl) triethoxysilane/silver nanoparticles to the abbreviated AgNPs/[NH₂-Si]-f-GO, was utilized to modify the glassy carbon electrode (GCE). Furthermore, the modified electrode was also investigated using the electrochemical methods such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The AgNPs/[NH₂-Si]-f-GO nanocomposite was investigated by UV-Vis spectrophotometry. Fourier transform infrared (FT-IR) spectrometry and transmission electron microscopy (TEM). Moreover, [Fe(CN)₆]^3-/4 solution in the role of an electrochemical probe was applied. The AgNPs/[NH₂-Si]-f-GO nanocomposite was confirmed as a good layer to covalent immobilization of aptamer (Apt) onto the GCE surface. In this sense, the DPV was used as a sensitive electrochemical technique for the measurement of CAP with an appropriate linear concentration range which was found to be between 10 pM and 0.2 μM and, with a low limit of detection, it equaled 3.3 pM. CAP which was identified in the presence of other usual antibiotics existed in the real samples.

TiO2 nanotubes/reduced GO nanoparticles for sensitive detection of breast cancer cells and photothermal performance

In this study, we developed a simple and cost effective aptasensor based on TiO₂ nanotubes-reduced graphene oxide (TiO₂ nanotube-rGO) linked to MUC1 aptamers for ultrasensitive electrochemical detection of breast cancer cell (MCF-7). Moreover, the photothermal performance of nanohybrid TiO₂-rGO was investigated for cancer treatment. In this regard, after synthesize of TiO₂ nanotubes via anodization process, TiO₂ nanotubes-rGO hybrid was synthesized by UV assisted reduction of GO and subsequent TiO₂ nanotubes attachment to rGO sheets. The resultant hybrid could provide an excellent large surface area leading to improvement of suitable sites for MUC1 aptamer immobilization. Our results revealed that TiO₂-rGO aptasensor exhibited superior analytical performance for MCF-7 cell detection with the detection limit of 40 cells.ml^-1 within the detection range of 10³-10⁷ cells. ml^-1. In addition, the designed aptasensor was effectively applied to detect MUC1 marker in a real sample. Moreover, the TiO₂ nanotube-rGO hybrid nanoparticles revealed great photothermal performance exposed to NIR laser. It could be concluded that nanohybrid TiO₂-rGO would be a useful and beneficial platform for detection and treatment of breast cancer.

An ultrasensitive electrochemical anti-lysozyme aptasensor with biorecognition surface based on aptamer/amino-rGO/ionic liquid/amino-mesosilica nanoparticles

In this work, a novel method based on aptamers is proposed for electrochemical measurement of lysozyme. To this end, screen-printed carbon electrode (SPCE) was modified with a nanocomposite made from amino-reduced graphene oxide (Amino-rGO) synthesized from natural graphite powder, an ionic liquid (IL), and amino-mesosilica nanoparticles (Amino-MSNs). The composition of the nanocomposite (Amino-rGO/IL/Amino-MSNs) results in high thermal and chemical stability, conductivity, surface-to-volume ratio, cost efficiency, biocompatibility, and great bioelectrocatalysis characteristics. Presence of numerous amino groups, as well as remaining oxygen defects in rGO, provides a suitable site for immobilization of aptamers. Furthermore, use of this nanocomposite leads to considerable enhancement of the electrochemical signal and improved method sensitivity. Covalent coupling of aptamer's amino groups with that of the nanocomposite using glutaraldehyde (GLA) as a linker helps immobilize amino-linked lysozyme aptamers (Anti-Lys aptamers) on nanocomposite. The modified electrode was characterized using electrochemical methods such as cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The immobilized aptamer selectively adsorbs lysozyme (Lys) on the electrode interface, leading to increased Charge Transfer Resistance (R_CT) in EIS and decrease in the DPV peak currents which are used as analytical signals. Two separate calibration curves were drawn using the data acquired from EIS and DPV. The prepared anti-Lys aptasensor has two very low LODs equal to 2.1 and 4.2 fmol L^-1 with wide detection ranges of 10 fmol L^-1 to 200 nmol L^-1, and 20 fmol L^-1 to 50 nmol L^-1 for EIS and DPV calibration curves, respectively. The SPCE/Amino-rGO/IL/Amino-MSNs/APT also showed high reproducibility, specificity, sensitivity, and rapid response to Lys which has various applications in fields of bioengineering and biomedicine.

Fabrication of a novel and ultrasensitive label-free electrochemical aptasensor for detection of biomarker prostate specific antigen

In this study, a novel and efficient aptasensor based on immobilization of thiol terminated prostate specific antigen (PSA) binding DNA aptamer onto Au nanoparticles/fullerene C₆₀-chitosan-ionic liquid/multiwalled carbon nanotubes/screen printed carbon electrode has been fabricated for ultrasensitive aptasensing of biomarker PSA. Formation of PSA-aptamer complex caused a variation in electrochemical impedance spectroscopic (EIS) and differential pulse voltammetric (DPV) responses of the aptasensor which enabled us to aptasensing of the PSA by EIS and DPV methods. Morphology and electrochemical properties of the fabricated aptasensor were examined by scanning electron microscopy (SEM), cyclic voltammetry (CV) and EIS. The aptasensor was successfully applied to the determination of PSA by EIS and DPV in the range of 1-200 pg mL^-1 with a limit of detection (LOD) of 0.5 pg mL^-1 and 2.5-90 ng mL^-1 with a LOD of 1.5 ng mL^-1, respectively. This aptasensor exhibited outstanding anti-interference ability towards co-existing molecules with good stability, sensitivity, repeatability and reproducibility. Practical application of the aptasensor was examined with analysis of the PSA levels in serum samples obtained from patients with prostate cancer using both the aptasensor and a reference method. The results revealed the proposed system to be a promising candidate for clinical analysis of PSA.

A facile electrochemical aptasensor for lysozyme detection based on target-induced turn-off of photosensitization

The quantification of proteins is essential in fundamental research or clinical applications. Here, we developed a facile electrochemical aptasensor based on target-induced turn-off of photosensitization for label-free and ultrasensitive detection of protein (exemplified by lysozyme). EB (ethidium bromide) molecules that were embedded in dsDNA between lysozyme binding aptamer and complementary DNA immobilized on the electrode, could photo-cleave the dsDNA via singlet oxygen (O₂¹) during photosensitization, resulting in a high voltammetry current of the [Fe(CN)₆]^3-/4-. Upon recognition of the lysozyme by aptamer, the EB molecules were released from dsDNA, and its photosensitization activity was turned off. As a result, more amount of complementary DNA was retained on the Au nanoparticles modified carbon nanotube paste electrode (AuNPs-CNPE), leading to a declined voltammetry current. Such a sensing strategy allowed detection of 10 pM-1 µM lysozyme with a low detection limit (about 2 pM). Besides, the sensor was free of labeling procedure as well as extra signal amplification step, and the CNPE modification was quite simple, only with AuNPs. The sensor also showed excellent selectivity toward lysozyme in the presence of interfering proteins, such as thrombin, bovine serum albumin, myoglobin, etc. The proposed sensor was applied to the determination of lysozyme in urine samples with the recoveries ranging from 96.6% to 101%. The proposed biosensor holds a great promise in developing other electrochemical sensors based on photosensitization.

A Low-Cost Inkjet-Printed Aptamer-Based Electrochemical Biosensor for the Selective Detection of Lysozyme

Recently, inkjet-printing has gained increased popularity in applications such as flexible electronics and disposable sensors, as well as in wearable sensors because of its multifarious advantages. This work presents a novel, low-cost immobilization technique using inkjet-printing for the development of an aptamer-based biosensor for the detection of lysozyme, an important biomarker in various disease diagnosis. The strong affinity between the carbon nanotube (CNT) and the single-stranded DNA is exploited to immobilize the aptamers onto the working electrode by printing the ink containing the dispersion of CNT-aptamer complex. The inkjet-printing method enables aptamer density control, as well as high resolution patternability. Our developed sensor shows a detection limit of 90 ng/mL with high target selectivity against other proteins. The sensor also demonstrates a shelf-life for a reasonable period. This technology has potential for applications in developing low-cost point-of-care diagnostic testing kits for home healthcare.

DNA-Templated Aptamer Probe for Identification of Target Proteins

Using aptamers as molecular probes for biomarker discovery has attracted a great deal of attention in recent years. However, it is still a big challenge to accurately identify those protein markers that are targeted by aptamers under physiological conditions due to weak and noncovalent aptamer-protein interactions. Herein, we developed an aptamer based dual-probe using DNA-templated chemistry and photo-cross-linking technique for the identification of target proteins that are recognized by aptamers. In this system, the aptamer was modified by a single strand DNA as binding probe (BP), and another complementary DNA with a photoactive group and reporter group was modified as capture probe (CP). BP was first added to recruit the binding protein via aptamer recognition, and subsequently CP was added to let the cross-linker close to the target via DNA self-assembly, and then a covalent bond between CP and its binding protein was achieved via photo-cross-linking reaction. The captured protein can be detected or affinity enrichment using the tag, finally identified by MS. By use of lysozyme as a model substrate, we demonstrated that this multiple functionalized probe can be utilized for a successful labeling and enrichment of target protein even under a complicated and real environment. Thus, a novel method to precisely identify the aptamer-targeted proteins has been developed and it has a potential application for discovery of aptamer-based biomarkers.

Electrochemical bioassay development for ultrasensitive aptasensing of prostate specific antigen

A densely packed gold nanoparticles on the rGO-MWCNT platform was used as the basis for an ultrasensitive label-free electrochemical aptasensor to detect the biomarker prostate specific antigen (PSA) in serum. The detection was based on that the variation of electron transfer resistance (R_ct) and differential pulse voltammetry (DPV) current were relevant to the formation of PSA-aptamer complex at the modified electrode surface. Compared with pure AuNPs, rGO-MWCNT and MWCNT/AuNPs, the rGO-MWCNT/AuNPs nanocomposite modified electrode was the most sensitive aptasensing platform for the determination of PSA. Two calibration curves were prepared from the data obtained from the DPV and electrochemical impedance spectroscopy (EIS) by plotting the peak current and R_ct against PSA concentration, respectively. The proposed aptasensor had an extremely low LOD of 1.0pgmL^-1 PSA within the detection range of 0.005-20ngmL^-1 and 0.005-100ngmL^-1 for DPV and EIS calibration curves, respectively. This sensor exhibited outstanding anti-interference ability towards co-existing molecules with good stability, sensitivity, and reproducibility. Clinical application was performed with analysis of the PSA levels in serum samples obtained from patients with prostate cancer using both the aptasensor and Immunoradiometric assay. The results revealed the proposed system to be a promising candidate for clinical analysis of PSA.

An electrochemical aptasensor based on TiO2/MWCNT and a novel synthesized Schiff base nanocomposite for the ultrasensitive detection of thrombin

A sensitive aptasensor based on a robust nanocomposite of titanium dioxide nanoparticles, multiwalled carbon nanotubes (MWCNT), chitosan and a novel synthesized Schiff base (SB) (TiO2/MWCNT/CHIT/SB) on the surface of a glassy carbon electrode (GCE) was developed for thrombin detection. The resultant nanocomposite can provide a large surface area, excellent electrocatalytic activity, and high stability, which would improve immobilization sites for biological molecules, allow remarkable amplification of the electrochemical signal and contribute to improved sensitivity. Thrombin aptamers were simply immobilized onto the TiO2-MWCNT/CHIT-SB nanocomposite matrix through simple π - π stacking and electrostatic interactions between CHIT/SB and aptamer strands. The electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to analyze the surface characterization of unmodified GCE and TiO2-MWCNT/CHIT-SB modified GCE, and also the interaction between aptamer and thrombin. In the presence of thrombin, the aptamer on the adsorbent layer captures the target on the electrode interface, which makes a barrier for electrons and inhibits electron transfer, thereby resulting in decreased DPV and increased impedance signals of the TiO2-MWCNT/CHIT-SB modified GCE. Furthermore, the proposed aptasensor has a very low LOD of 1.0fmolL(-1) thrombin within the detection range of 0.00005-10nmolL(-1). The aptasensor also presents high specificity and reproducibility for thrombin, which is unaffected by the coexistence of other proteins. Clinical application was performed with analysis of the thrombin levels in blood and CSF samples obtained from patients with MS, Parkinson, Epilepsy and Polyneuropathy using both the aptasensor and commercial ELISA kit. The results revealed the proposed system to be a promising candidate for clinical analysis of thrombin.

Carbon nanomaterials-based electrochemical aptasensors

Carbon nanomaterials (CNMs) have attracted increasing attention due to their unique electrical, optical, thermal, mechanical and chemical properties. CNMs are extensively applied in electronic, optoelectronic, photovoltaic and sensing devices fields, especially in bioassay technology. These excellent properties significantly depend on not only the functional atomic structures of CNMs, but also the interactions with other materials, such as gold nanoparticles, SiO2, chitosan, etc. This review systematically summarizes applications of CNMs in electrochemical aptasensors (ECASs). Firstly, definition and development of ECASs are introduced. Secondly, different ways of ECASs about working principles, classification and construction of CNMs are illustrated. Thirdly, the applications of different CNMs used in ECASs are discussed. In this review, different types of CNMs are involved such as carbon nanotubes, graphene, graphene oxide, etc. Besides, the newly emerging CNMs and CNMs-based composites are also discoursed. Finally, we demonstrate the future prospects of CNMs-based ECASs, and some suggestions about the near future development of CNMs-based ECASs are highlighted.

Feasible electrochemical biosensor based on plasma polymerization-assisted composite of polyacrylic acid and hollow TiO2 spheres for sensitively detecting lysozyme

A composite made of polyacrylic acid and hollow TiO2 spheres (TiO2@PPAA) was prepared by the plasma polymerization method and subsequently used as an electrode material for detecting lysozyme. The chemical structure, surface morphology, and electrochemical performance of the TiO2@PPAA composite were mainly affected by the plasma input power used during plasma polymerization. After optimizing plasma conditions, aptamer strands exhibited high adsorption affinity toward the surface of TiO2@PPAA composite via synergistic effects between TiO2 and PPAA. Electrochemical impedance spectroscopy results showed that the developed TiO2@PPAA aptasensor presents highly sensitive detection ability toward lysozyme; the limit of detection of the proposed aptasensor is 0.015 ng mL(-1) (1.04 pM) within the range of 0.05-100 ng mL(-1) in terms of 3σ value. The film further showed excellent selectivity toward lysozyme in the presence of interfering proteins, such as thrombin, bovine serum albumin, and immunoglobulin E. Thus, this aptasensing strategy might broaden the applications of plasma polymerized nanomaterials in the field of biomedical research and early clinical diagnosis.