Magnetoelectric CoFe2O4/polyvinylidene fluoride electrospun nanofibres

Chitosan/MWCNTs nanocomposite coating on 3D printed scaffold of poly 3-hydroxybutyrate/magnetic mesoporous bioactive glass: A new approach for bone regeneration

The utilization of 3D printing has become increasingly common in the construction of composite scaffolds. In this study, magnetic mesoporous bioactive glass (MMBG) was incorporated into polyhydroxybutyrate (PHB) to construct extrusion-based 3D printed scaffold. After fabrication of the PHB/MMBG composite scaffolds, they were coated with chitosan (Cs) and chitosan/multi-walled carbon nanotubes (Cs/MWCNTs) solutions utilizing deep coating method. FTIR was conducted to confirm the presence of Cs and MWCNTs on the scaffolds' surface. The findings of mechanical analysis illustrated that presence of Cs/MWCNTs on the composite scaffolds increases compressive young modulus significantly, from 16.5 to 42.2 MPa. According to hydrophilicity evaluation, not only MMBG led to decrease the contact angle of pure PHB but also scaffolds surface modification utilization of Cs and MWCNTs, the contact angle decreased significantly from 82.34° to 54.15°. Furthermore, investigation of cell viability, cell metabolism and inflammatory cytokines such as interleukin-6 (IL-6) and tumor necrosis factor alpha (TNF-α) and interleukin-10 (IL-10) and transforming growth factor-beta (TGF-β) proved that the scaffolds not only do not stimulate the immune system, but also polarize macrophage cells from M1 phase to M2 phase. The present study highlights the suitability of 3D printed scaffold PHB/MMBG with Cs/MWCNTs coating for bone tissue engineering.

Magnetically Activated Piezoelectric 3D Platform Based on Poly(Vinylidene) Fluoride Microspheres for Osteogenic Differentiation of Mesenchymal Stem Cells

Mesenchymal stem cells (MSCs) osteogenic commitment before injection enhances bone regeneration therapy results. Piezoelectric stimulation may be an effective cue to promote MSCs pre-differentiation, and poly(vinylidene) fluoride (PVDF) cell culture supports, when combined with CoFe2O4 (CFO), offer a wireless in vitro stimulation strategy. Under an external magnetic field, CFO shift and magnetostriction deform the polymer matrix varying the polymer surface charge due to the piezoelectric effect. To test the effect of piezoelectric stimulation on MSCs, our approach is based on a gelatin hydrogel with embedded MSCs and PVDF-CFO electroactive microspheres. Microspheres were produced by electrospray technique, favouring CFO incorporation, crystallisation in β-phase (85%) and a crystallinity degree of around 55%. The absence of cytotoxicity of the 3D construct was confirmed 24 h after cell encapsulation. Cells were viable, evenly distributed in the hydrogel matrix and surrounded by microspheres, allowing local stimulation. Hydrogels were stimulated using a magnetic bioreactor, and no significant changes were observed in MSCs proliferation in the short or long term. Nevertheless, piezoelectric stimulation upregulated RUNX2 expression after 7 days, indicating the activation of the osteogenic differentiation pathway. These results open the door for optimising a stimulation protocol allowing the application of the magnetically activated 3D electroactive cell culture support for MSCs pre-differentiation before transplantation.

Microfluidic Processing of Piezoelectric and Magnetic Responsive Electroactive Microspheres

Poly(vinylidene fluoride) (PVDF) combined with cobalt ferrite (CFO) particles is one of the most common and effective polymeric magnetoelectric composites. Processing PVDF into its electroactive phase is a mandatory condition for featuring electroactive behavior and specific (post)processing may be needed to achieve this state, although electroactive phase crystallization is favored at processing temperatures below 60 °C. Different techniques are used to process PVDF-CFO nanocomposite structures into microspheres with high CFO dispersion, with microfluidics adding the advantages of high reproducibility, size tunability, and time and resource efficiency. In this work, magnetoelectric microspheres are produced in a one-step approach. We describe the production of high content electroactive phase PVDF and PVDF-CFO microspheres using microfluidic technology. A flow-focusing polydimethylsiloxane device is fabricated based on a 3D printed polylactic acid master, which enables the production of spherical microspheres with mean diameters ranging from 80 to 330 μm. The microspheres feature internal and external cavernous structures and good CFO distribution with an encapsulation efficacy of 80% and prove to be in the electroactive γ-phase with a mean content of 75%. The microspheres produced using this approach show suitable characteristics as active materials for tissue regeneration strategies and other piezoelectric polymer applications.

Robust Piezoelectric Coefficient Recovery by Nano-Inclusions Dispersion in Un-Poled PVDF–Ni0.5Zn0.5Fe2O4 Ultra-Thin Films

This work aimed to study the influence of the hybrid interface in polyvinylidene fluoride (PVDF)-based composite thin films on the local piezoelectric response. Our results provide evidence of a surprising contradiction: the optimization process of the β-phase content using nano-inclusions did not correspond to the expected nanoscale piezoelectric optimization. A large piezoelectric loss was observed at the nanoscale level, which contrasts with the macroscopic polarization measurement observations. Our main goal was to show that the dispersion of metallic ferromagnetic nano-inclusions inside the PVDF films allows for the partial recovery of the local piezoelectric properties. From a dielectric point of view, it is not trivial to expect that keeping the same amount of the metallic volume inside the dielectric PVDF matrix would bring a better piezoelectric response by simply dispersing this phase. On the local resonance measured by PFM, this should be the worst due to the homogeneous distribution of the nano-inclusions. Both neat PVDF films and hybrid ones (0.5% in wt of nanoparticles included into the polymer matrix) showed, as-deposited (un-poled), a similar β-phase content. Although the piezoelectric coefficient in the case of the hybrid films was one order of magnitude lower than that for the neat PVDF films, the robustness of the polarized areas was reported 24 h after the polarization process and after several images scanning. We thus succeeded in demonstrating that un-poled polymer thin films can show the same piezoelectric coefficient as the poled one (i.e., 10 pm/V). In addition, low electric field switching (50 MV/m) was used here compared to the typical values reported in the literature (100–150 MV/m).

Magnetoelectric effect in flexible nanocomposite films based on size-matching

Flexible magnetoelectric (ME) nanocomposites with a strong coupling between ferromagnetism and ferroelectricity are of significant importance from the point of view of next-generation flexible electronic devices. However, a high loading of magnetic nanomaterials is needed to achieve preferable ME response due to the size mismatch of the magnetostrictive phase and piezoelectric phase. In this work, ultra-small CoFe2O4 nanoparticles were prepared to match the size of the polar crystal in poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)), and 1H,1H,2H,2H-perfluorooctyltriethoxysilane (POTS) is introduced to enhance the interplay between P(VDF-TrFE) and CoFe2O4. The above multiple effects promote a good connection between the magnetostrictive phase and the piezoelectric phase. Therefore, an effective transference of stress from CoFe2O4 to P(VDF-TrFE) can be achieved. The as-prepared P(VDF-TrFE)/CoFe2O4@POTS exhibits a high ME coupling coefficient of 34 mV cm-1 Oe-1 when the content of CoFe2O4@POTS is 20 wt%. The low loading of fillers ensures the flexibility of ME nanocomposite films.

Paramagnetic Functionalization of Biocompatible Scaffolds for Biomedical Applications: A Perspective

The burst of research papers focused on the tissue engineering and regeneration recorded in the last years is justified by the increased skills in the synthesis of nanostructures able to confer peculiar biological and mechanical features to the matrix where they are dispersed. Inorganic, organic and hybrid nanostructures are proposed in the literature depending on the characteristic that has to be tuned and on the effect that has to be induced. In the field of the inorganic nanoparticles used for decorating the bio-scaffolds, the most recent contributions about the paramagnetic and superparamagnetic nanoparticles use was evaluated in the present contribution. The intrinsic properties of the paramagnetic nanoparticles, the possibility to be triggered by the simple application of an external magnetic field, their biocompatibility and the easiness of the synthetic procedures for obtaining them proposed these nanostructures as ideal candidates for positively enhancing the tissue regeneration. Herein, we divided the discussion into two macro-topics: the use of magnetic nanoparticles in scaffolds used for hard tissue engineering for soft tissue regeneration.

Converse magneto-electric effects in a core-shell multiferroic nanofiber by electric field tuning of ferromagnetic resonance

This report is on studies directed at the nature of magneto-electric (ME) coupling by ferromagnetic resonance (FMR) under an electric field in a coaxial nanofiber of nickel ferrite (NFO) and lead zirconate titanate (PZT). Fibers with ferrite cores and PZT shells were prepared by electrospinning. The core-shell structure of annealed fibers was confirmed by electron- and scanning probe microscopy. For studies on converse ME effects, i.e., the magnetic response of the fibers to an applied electric field, FMR measurements were done on a single fiber with a near-field scanning microwave microscope (NSMM) at 5-10 GHz by obtaining profiles of both amplitude and phase of the complex scattering parameter S11 as a function of bias magnetic field. The strength of the voltage-ME coupling Av was determined from the shift in the resonance field Hr for bias voltage of V = 0-7 V applied to the fiber. The coefficient Av for the NFO core/PZT shell structure was estimated to be - 1.92 kA/Vm (- 24 Oe/V). A model was developed for the converse ME effects in the fibers and the theoretical estimates are in good agreement with the data.

Magnetoelectric Membrane Filters of Poly(vinylidene fluoride)/Cobalt Ferrite Oxide for Effective Capturing of Particulate Matter

In the last decade, particulate matter (PM) has gradually become a serious public health issue due to its harmful impact on the human body. In this study, we report a novel filtration system for high PM capturing, based on the magnetoelectric (ME) effect that induces an effective surface charge in membrane filters. To elucidate the ME effect on PM capturing, we prepared electrospun poly(vinylidene fluoride)(PVDF)/CoFe2O4(CFO) membranes and investigated their PM capturing efficiency. After electrical poling under a high electric field of 10 kV/mm, PM-capturing efficiencies of the poled-PVDF/CFO membrane filters were improved with carbon/fluorine(C/F) molar ratios of C/F = 4.81 under Hdc = 0 and C/F = 7.01 under Hdc = 700 Oe, respectively. The result illustrates that electrical poling and a dc magnetic field could, respectively, enhance the surface charge of the membrane filters through (i) a strong beta-phase alignment in PVDF (poling effect) and (ii) an efficient shape change of PVDF/CFO membranes (magnetostriction effect). The diffusion rate of a water droplet on the PVDF/CFO membrane surface is reduced from 0.23 to 0.05 cm2/s by covering the membrane surface with PM. Consequently, the PM capturing efficiency is dramatically improved up to 175% from ME membranes with the poling process and applying a magnetic field. Furthermore, the PM was successfully captured on the prototype real mask derived from the magnetoelectric effect induced by a permanent magnet with a diameter of 2 cm without any external power.

Solution Blow Spinning of Polyvinylidene Fluoride Based Fibers for Energy Harvesting Applications: A Review

Polyvinylidene fluoride (PVDF)-based piezoelectric materials (PEMs) have found extensive applications in energy harvesting which are being extended consistently to diverse fields requiring strenuous service conditions. Hence, there is a pressing need to mass produce PVDF-based PEMs with the highest possible energy harvesting ability under a given set of conditions. To achieve high yield and efficiency, solution blow spinning (SBS) technique is attracting a lot of interest due to its operational simplicity and high throughput. SBS is arguably still in its infancy when the objective is to mass produce high efficiency PVDF-based PEMs. Therefore, a deeper understanding of the critical parameters regarding design and processing of SBS is essential. The key objective of this review is to critically analyze the key aspects of SBS to produce high efficiency PVDF-based PEMs. As piezoelectric properties of neat PVDF are not intrinsically much significant, various additives are commonly incorporated to enhance its piezoelectricity. Therefore, PVDF-based copolymers and nanocomposites are also included in this review. We discuss both theoretical and experimental results regarding SBS process parameters such as solvents, dissolution methods, feed rate, viscosity, air pressure and velocity, and nozzle design. Morphological features and mechanical properties of PVDF-based nanofibers were also discussed and important applications have been presented. For completeness, key findings from electrospinning were also included. At the end, some insights are given to better direct the efforts in the field of PVDF-based PEMs using SBS technique.

Recent Advances on Magnetic Sensitive Hydrogels in Tissue Engineering

Tissue engineering is a promising strategy for the repair and regeneration of damaged tissues or organs. Biomaterials are one of the most important components in tissue engineering. Recently, magnetic hydrogels, which are fabricated using iron oxide-based particles and different types of hydrogel matrices, are becoming more and more attractive in biomedical applications by taking advantage of their biocompatibility, controlled architectures, and smart response to magnetic field remotely. In this literature review, the aim is to summarize the current development of magnetically sensitive smart hydrogels in tissue engineering, which is of great importance but has not yet been comprehensively viewed.

Bioinspired Three-Dimensional Magnetoactive Scaffolds for Bone Tissue Engineering

Bone tissue repair strategies are gaining increasing relevance due to the growing incidence of bone disorders worldwide. Biochemical stimulation is the most commonly used strategy for cell regeneration, while the application of physical cues, including magnetic, mechanical, or electrical fields, is a promising, however, scarcely investigated field. This work reports on novel magnetoactive three-dimensional (3D) porous scaffolds suitable for effective proliferation of osteoblasts in a biomimetic microenvironment. This physically active microenvironment is developed through the bone-mimicking structure of the scaffold combined with the physical stimuli provided by a magnetic custom-made bioreactor on a magnetoresponsive scaffold. Scaffolds are obtained through the development of nanocomposites comprised of a piezoelectric polymer, poly(vinylidene fluoride) (PVDF), and magnetostrictive particles of CoFe₂O₄, using a solvent casting method guided by the overlapping of nylon template structures with three different fiber diameter sizes (60, 80, and 120 μm), thus generating 3D scaffolds with different pore sizes. The magnetoactive composites show a structure very similar to trabecular bone with pore sizes that range from 5 to 20 μm, owing to the inherent process of crystallization of PVDF with the nanoparticles (NPs), interconnected with bigger pores, formed after removing the nylon templates. It is found that the materials crystallize in the electroactive β-phase of PVDF and promote the proliferation of preosteoblasts through the application of magnetic stimuli. This phenomenon is attributed to both local magnetomechanical and magnetoelectric response of the scaffolds, which induce a proper cellular mechano- and electro-transduction process.

Fabrication of Electrospun Polymer Nanofibers with Diverse Morphologies

Fiber structures with nanoscale diameters offer many fascinating features, such as excellent mechanical properties and high specific surface areas, making them attractive for many applications. Among a variety of technologies for preparing nanofibers, electrospinning is rapidly evolving into a simple process, which is capable of forming diverse morphologies due to its flexibility, functionality, and simplicity. In such review, more emphasis is put on the construction of polymer nanofiber structures and their potential applications. Other issues of electrospinning device, mechanism, and prospects, are also discussed. Specifically, by carefully regulating the operating condition, modifying needle device, optimizing properties of the polymer solutions, some unique structures of core⁻shell, side-by-side, multilayer, hollow interior, and high porosity can be obtained. Taken together, these well-organized polymer nanofibers can be of great interest in biomedicine, nutrition, bioengineering, pharmaceutics, and healthcare applications.

Low-field giant magneto-ionic response in polymer-based nanocomposites

The future of magnetoelectric (ME) materials is closely linked to the optimization of the ME response on nanocomposites or to the introduction of new effects to achieve higher ME performance from low magnetic fields. Here, we report a P(VDF-TrFE)/[C4mim][FeCl4] nanocomposite with a magneto-ionic response that produces giant magnetoelectric coefficients up to ≈10 V cm-1 Oe-1. This response comprises a magnetically triggered ionic/charge movement within the porous structure of the polymer, being this a novel phenomenon never experimentally observed or explored in magnetoelectric composites. This work successfully demonstrates the concept of exploring magnetic ionic liquids, such as [C4mim][FeCl4], in polymer-based magnetoelectric nanocomposites, suitable for low-field magnetic sensing devices. Such nanocomposites have remarkable potential for applications, not only because they exhibit a high ME response with scalable production and with good reproducibility but also because this coupling between magnetic order and electric order via ionic effects can lead to additional novel effects.

Electroactive biomaterial surface engineering effects on muscle cells differentiation

Even though skeletal muscle cells can naturally regenerate as a response to insignificant tissue damages, more severe injuries can cause irreversible loss of muscle cells mass and/or function. Until now, cell therapies are not a good approach to treat those injuries. Biomaterials such as poly(vinylidene fluoride), PVDF, can improve muscle regeneration by presenting physical cues to muscle cells that mimic the natural regeneration environment. In this way, the ferroelectric and piezoelectric properties of PVDF offer new opportunities for skeletal muscle tissue engineering once the piezoelectricity is an electromechanical effect that can be used to provide electrical signals to the cells, upon mechanical solicitations, similar to the ones found in several body tissues. Thus, previous to dynamic experiments, it is important to determine how the surface properties of the material, both in terms of the poling state (positive or negative net surface charge) and of the morphology (films or fibers) influence myoblast differentiation. It was observed that PVDF promotes myogenic differentiation of C2C12 cells as evidenced by quantitative analysis of myotube fusion, maturation index, length, diameter and number. Charged surfaces improve the fusion of muscle cells into differentiated myotubes, as demonstrated by fusion and maturation index values higher than the control samples. Finally, the use of random and oriented β-PVDF electrospun fibers scaffolds has revealed differences in cell morphology. Contrary to the randomly oriented fibers, oriented PVDF electrospun fibers have promoted the alignment of the cells. It is thus demonstrated that the use of this electroactive polymer represents a suitable approach for the development of electroactive microenvironments for effective muscle tissue engineering.

Advances in Magnetic Nanoparticles for Biomedical Applications

Magnetic nanoparticles (NPs) are emerging as an important class of biomedical functional nanomaterials in areas such as hyperthermia, drug release, tissue engineering, theranostic, and lab-on-a-chip, due to their exclusive chemical and physical properties. Although some works can be found reviewing the main application of magnetic NPs in the area of biomedical engineering, recent and intense progress on magnetic nanoparticle research, from synthesis to surface functionalization strategies, demands for a work that includes, summarizes, and debates current directions and ongoing advancements in this research field. Thus, the present work addresses the structure, synthesis, properties, and the incorporation of magnetic NPs in nanocomposites, highlighting the most relevant effects of the synthesis on the magnetic and structural properties of the magnetic NPs and how these effects limit their utilization in the biomedical area. Furthermore, this review next focuses on the application of magnetic NPs on the biomedical field. Finally, a discussion of the main challenges and an outlook of the future developments in the use of magnetic NPs for advanced biomedical applications are critically provided.

Fluorinated Polymers as Smart Materials for Advanced Biomedical Applications

Fluorinated polymers constitute a unique class of materials that exhibit a combination of suitable properties for a wide range of applications, which mainly arise from their outstanding chemical resistance, thermal stability, low friction coefficients and electrical properties. Furthermore, those presenting stimuli-responsive properties have found widespread industrial and commercial applications, based on their ability to change in a controlled fashion one or more of their physicochemical properties, in response to single or multiple external stimuli such as light, temperature, electrical and magnetic fields, pH and/or biological signals. In particular, some fluorinated polymers have been intensively investigated and applied due to their piezoelectric, pyroelectric and ferroelectric properties in biomedical applications including controlled drug delivery systems, tissue engineering, microfluidic and artificial muscle actuators, among others. This review summarizes the main characteristics, microstructures and biomedical applications of electroactive fluorinated polymers.

Local probing of magnetoelectric properties of PVDF/Fe3O4 electrospun nanofibers by piezoresponse force microscopy

The coupling of magnetic and electric properties in polymer-based magnetoelectric composites offers new opportunities to develop contactless electrodes, effectively without electrical connections, for less-invasive integration into devices such as energy harvesters, sensors, wearable and implantable electrodes. Understanding the macroscale-to-nanoscale conversion of the properties is important, as nanostructured and nanoscale magnetoelectric structures are increasingly fabricated. However, whilst the magnetoelectric effect at the macroscale is well established both theoretically and experimentally, it remains unclear how this effect translates to the nanoscale, or vice versa. Here, PVDF/Fe₃O₄ polymer-based composite nanofibers are fabricated using electrospinning to investigate their piezoelectric and magnetoelectric properties at the single nanofiber level.