Newly Synthesized CoFe2-xDyxO4 (x = 0; 0.1; 0.2; 0.4) Nanoparticles Reveal Promising Anticancer Activity against Melanoma (A375) and Breast Cancer (MCF-7) Cells

The current study focuses on the synthesis via combustion of dysprosium-doped cobalt ferrites that were subsequently physicochemically analyzed in terms of morphological and magnetic properties. Three types of doped nanoparticles were prepared containing different Dy substitutions and coated with HPGCD for higher dispersion properties and biocompatibility, and were later submitted to biological tests in order to reveal their potential anticancer utility. Experimental data obtained through FTIR, XRD, SEM and TEM confirmed the inclusion of Dy3+ ions in the nanoparticles' structure. The size of the newly formed nanoparticles ranged between 20 and 50 nm revealing an inverse proportional relationship with the Dy content. Magnetic studies conducted by VSM indicated a decrease in remanent and saturation mass magnetization, respectively, in Dy-doped nanoparticles in a direct proportionality with the Dy content; the decrease was further amplified by cyclodextrin complexation. Biological assessment in the presence/absence of red light revealed a significant cytotoxic activity in melanoma (A375) and breast (MCF-7) cancer cells, while healthy keratinocytes (HaCaT) remained generally unaffected, thus revealing adequate selectivity. The investigation of the underlying cytotoxic molecular mechanism revealed an apoptotic process as indicated by nuclear fragmentation and shrinkage, as well as by Western blot analysis of caspase 9, p53 and cyclin D1 proteins. The anticancer activity for all doped Co ferrites varied was in a direct correlation to their Dy content but without being affected by the red light irradiation.

Microfluidic Processing of Piezoelectric and Magnetic Responsive Electroactive Microspheres

Poly(vinylidene fluoride) (PVDF) combined with cobalt ferrite (CFO) particles is one of the most common and effective polymeric magnetoelectric composites. Processing PVDF into its electroactive phase is a mandatory condition for featuring electroactive behavior and specific (post)processing may be needed to achieve this state, although electroactive phase crystallization is favored at processing temperatures below 60 °C. Different techniques are used to process PVDF-CFO nanocomposite structures into microspheres with high CFO dispersion, with microfluidics adding the advantages of high reproducibility, size tunability, and time and resource efficiency. In this work, magnetoelectric microspheres are produced in a one-step approach. We describe the production of high content electroactive phase PVDF and PVDF-CFO microspheres using microfluidic technology. A flow-focusing polydimethylsiloxane device is fabricated based on a 3D printed polylactic acid master, which enables the production of spherical microspheres with mean diameters ranging from 80 to 330 μm. The microspheres feature internal and external cavernous structures and good CFO distribution with an encapsulation efficacy of 80% and prove to be in the electroactive γ-phase with a mean content of 75%. The microspheres produced using this approach show suitable characteristics as active materials for tissue regeneration strategies and other piezoelectric polymer applications.

Calcination-Free Synthesis of Well-Dispersed and Sub-10 nm Spinel Ferrite Nanoparticles as High-Performance Anode Materials for Lithium-Ion Batteries: A Case Study of CoFe2 O4

Spinel ferrites are promising anode materials for lithium-ion batteries (LIBs) owing to their high theoretical specific capacities. However, their practical application is impeded by inherent low conductivity and severe volume expansion, which can be surpassed by increasing the surface-to-volume ratio of nanoparticles. Currently, most methods produce spinel ferrite nanoparticles with large size and severe aggregation, degrading their electrochemical performance. In this study, a low-temperature aminolytic route was designed to synthesize sub-10 nm CoFe₂ O₄ nanoparticles with good dispersion through carefully exploiting the reaction of acetates and oleylamine. The performance of CoFe₂ O₄ nanoparticles obtained by a traditional co-precipitation method was also investigated for comparison. This work demonstrates that CoFe₂ O₄ nanoparticles synthesized by the aminolytic route are promising as anode materials for LIBs. Besides, this method can be extended to design other spinel ferrites for energy storage devices with superior performance by simply changing the starting material, such as MnFe₂ O₄ , MgFe₂ O₄ , ZnFe₂ O₄ , and so on.

The Significance of Buffer Solutions on Corrosion Processes of Cobalt Ferrite CoFe2O4 Thin Film on Different Substrates

BACKGROUND

The spinel ferrite nanoparticles, such as zinc, nickel, and cobalt ferrites have exceptional electronic and magnetic properties. Cobalt ferrite nanomaterial (CoFe2O4) is a hard material that reveals high magnetic, mechanical, and chemical stability.

AIM AND OBJECTIVE

The objective of this research is to predict the corrosion behavior of cobalt ferrite (CoFe2O4) thin films deposited on different substrates (platinum Pt, stainless steel S.S, and copper Cu) in acidic, neutral, and alkaline medium.

MATERIALS AND METHODS

Cobalt ferrite thin films were deposited on platinum, stainless steel, and copper via electrodeposition-anodization process. After that, corrosion resistance of the prepared nanocrystalline cobalt ferrite on different substrates was investigated in acidic, neutral, and alkaline medium using open circuit potential and potentiodynamic polarization measurements. The crystal structure, crystallite size, microstructure, and magnetic properties of the ferrite films were investigated using a combination of XRD, SEM and VSM.

RESULTS

The results of XRD revealed a cubic spinel for the prepared cobalt ferrite CoFe2O4. The average size of crystallites was found to be about 43, 77, and 102 nm precipitated on platinum, stainless steel, and copper respectively. The magnetic properties of which were enhanced by rising the temperature. The sample annealed at 800oC is suitable for practical application as it showed high magnetization saturation and low coercivity. The corrosion resistance of these films depends on the pH of the medium as well as the presence of oxidizing agent.

CONCLUSION

Depending on the obtained corrosion rate, we can recommend that, CoFe2O4 thin film can be used safely in aqueous media in neutral and alkaline atmospheres for Pt and Cu substrates, but it can be used in all pH values for S.S. substrate.

Elimination of Escherichia coli in Water Using Cobalt Ferrite Nanoparticles: Laboratory and Pilot Plant Experiments

This paper focuses on the synthesis of cobalt ferrite nanoparticles by the sol-gel method and their photocatalytic activity to eliminate bacteria in aqueous media at two different scales: in a laboratory reactor and a solar pilot plant. Cobalt ferrite nanoparticles were prepared using Co(II) and Fe(II) salts as precursors and cetyltrimethyl ammonium bromide as a surfactant. The obtained nanoparticles were characterized by X-ray diffraction, scanning and transmission electron microscopy. Escherichia coli (E. coli) strain ATCC 22922 was used as model bacteria for contact biocidal analysis carried out by disk diffusion method and photocatalysis under an ultraviolet A (UV-A) lamp for laboratory analysis and solar radiation (radiation below 350 W/m2 in a typical cloudy day) for the pilot plant analysis. The results showed that cobalt ferrite nanoparticles have an average diameter of (36 ± 20) nm and the X-ray diffraction pattern shows a cubic spinel structure. Using the disk diffusion technique, it was obtained inhibition zones of (17 ± 2) mm diameter. Results confirm the photocatalytic elimination of E. coli in water samples with remaining bacteria below 1% of the initial concentration during the experiment time (30 min for laboratory tests and 1.5 h for pilot plant tests).

Tailored Biodegradable and Electroactive Poly(Hydroxybutyrate-Co-Hydroxyvalerate) Based Morphologies for Tissue Engineering Applications

Polymer-based piezoelectric biomaterials have already proven their relevance for tissue engineering applications. Furthermore, the morphology of the scaffolds plays also an important role in cell proliferation and differentiation. The present work reports on poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV), a biocompatible, biodegradable, and piezoelectric biopolymer that has been processed in different morphologies, including films, fibers, microspheres, and 3D scaffolds. The corresponding magnetically active PHBV-based composites were also produced. The effect of the morphology on physico-chemical, thermal, magnetic, and mechanical properties of pristine and composite samples was evaluated, as well as their cytotoxicity. It was observed that the morphology does not strongly affect the properties of the pristine samples but the introduction of cobalt ferrites induces changes in the degree of crystallinity that could affect the applicability of prepared biomaterials. Young’s modulus is dependent of the morphology and also increases with the addition of cobalt ferrites. Both pristine and PHBV/cobalt ferrite composite samples are not cytotoxic, indicating their suitability for tissue engineering applications.