Cationic polymerization of vinyl ethers using trifluoromethyl sulfonate/solvent/ligand to access well-controlled poly(vinyl ether)s

Cationic polymerization of vinyl ethers to access poly(vinyl ether) polymeric materials has been challenging due to stringent polymerization conditions and inevitable chain transfer. Herein we introduce a protocol using trifluoromethyl sulfonates to catalyze the polymerization of a series of vinyl ethers. These trifluoromethyl sulfonates are fully commercially available and can be stored under ambient conditions. Solvents and ligands have profound influences on the polymerization process, and poly(vinyl ether)s with different molecular weights, molecular weight distributions, and tacticities were obtained. A few combinations of trifluoromethyl sulfonate/solvents/O^O type ligands were explored. They showed high activities and afforded poly(vinyl ether)s with well-controlled tacticity, of which the isotacticity can be up to 81% m. Poly(vinyl ether)s with high tacticities exhibit crystallization behaviors with melting points. We also probed the cationic reversible addition-fragmentation chain transfer (RAFT) polymerization of ethyl vinyl ether employing a RAFT chain transfer agent. Low molecular weight distributions (Đs) around 1.1 can be realized. Since trifluoromethyl sulfonates can be fed at a remarkably low catalyst loading and other chemicals are cheap and easily available, the poly(vinyl ether) polymeric materials are promisingly prepared on a large scale.

Precision Cellulose from Living Cationic Polymerization of Glucose 1,2,4-Orthopivalates

Cellulose serves as a sustainable biomaterial for a wide range of applications in biotechnology and materials science. While chemical and enzymatic glycan assembly methods have been developed to access modest quantities of synthetic cellulose for structure-property studies, chemical polymerization strategies for scalable and well-controlled syntheses of cellulose remain underdeveloped. Here, we report the synthesis of precision cellulose via living cationic ring-opening polymerization (CROP) of glucose 1,2,4-orthopivalates. In the presence of dibutyl phosphate as an initiator and triflic acid as a catalyst, precision cellulose with well-controlled molecular weights, defined chain-end groups, and excellent regio- and stereospecificity was readily prepared. We further demonstrated the utility of this method through the synthesis of precision native d-cellulose and rare precision l-cellulose.

Cationic β-Scission of C-H and C-C Bonds for Selective Dimerization and Subsequent Sulfur-Free RAFT Polymerization of α-Methylstyrene and Isobutylene

A series of exo-olefin compounds ((CH3 )2 C(PhY)-CH2 C(=CH2 )PhY) were prepared by selective cationic dimerization of α-methylstyrene (αMS) derivatives (CH2 =C(CH3 )PhY) with p-toluenesulfonic acid (TsOH) via β-C-H scission. They were subsequently used as reversible chain transfer agents for sulfur-free cationic RAFT polymerization of αMS via β-C-C scission in the presence of Lewis acid catalysts such as SnCl4 . In particular, exo-olefin compounds with electron-donating substituents, such as a 4-MeO group (Y) on the aromatic ring, worked as efficient cationic RAFT agents for αMS to produce poly(αMS) with controlled molecular weights and exo-olefin terminals. Other exo-olefin compounds (R-CH2 C(=CH2 )(4-MeOPh)) with various R groups were prepared by different methods to examine the effects of R groups on the cationic RAFT polymerization. A sulfur-free cationic RAFT polymerization also proceeded for isobutylene (IB) with the exo-olefin αMS dimer ((CH3 )2 C(Ph)-CH2 C(=CH2 )Ph). Furthermore, telechelic poly(IB) with exo-olefins at both terminals was obtained with a bifunctional RAFT agent containing two exo-olefins. Finally, block copolymers of αMS and methyl methacrylate (MMA) were prepared via mechanistic transformation from cationic to radical RAFT polymerization using exo-olefin terminals containing 4-MeOPh groups as common sulfur-free RAFT groups for both cationic and radical polymerizations.

Statistical Copolymers of N-Vinylpyrrolidone and 2-Chloroethyl Vinyl Ether via Radical RAFT Polymerization: Monomer Reactivity Ratios, Thermal Properties, and Kinetics of Thermal Decomposition of the Statistical Copolymers

The radical statistical copolymerization of N-vinyl pyrrolidone (NVP) and 2-chloroethyl vinyl ether (CEVE) was conducted using the Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization technique, employing [(O-ethylxanthyl)methyl]benzene (CTA-1) and O-ethyl S-(phthalimidylmethyl) xanthate (CTA-2) as the Chain Transfer Agents (CTAs), leading to P(NVP-stat-CEVE) products. After optimizing copolymerization conditions, monomer reactivity ratios were estimated using various linear graphical methods, as well as the COPOINT program, which was applied in the framework of the terminal model. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the monomers' mean sequence lengths. Thermal properties of the copolymers were studied by Differential Scanning Calorimetry (DSC) and kinetics of their thermal degradation by Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG), applying the isoconversional methodologies of Ozawa-Flynn-Wall (OFW) and Kissinger-Akahira-Sunose (KAS).

Cationic Single-Unit Monomer Insertion (cSUMI): From Discrete Oligomers to the α-/ω-End and In-Chain Sequence-Regulated Polymers

Single-unit monomer insertion (SUMI) has become an important strategy for the synthesis of sequence-controlled vinyl polymers due to its strong versatility and high efficiency. However, all reported SUMI processes are based on a free-radical mechanism, resulting in a limited number of monomer types being applicable to SUMI or a limited number of sequences of structural units that SUMI can synthesize. Herein, we developed a novel SUMI based on a cationic mechanism (cSUMI), which operates through a degenerative (similar to radical SUMI) but cationic chain transfer process. By optimizing the chain transfer agent (CTA) and monomer pairs, a high-efficiency cSUMI was achieved for vinyl ether and styrene monomers. Based on this reaction, a range of discrete oligomers containing vinyl ether and styrene moieties, and even α-/ω-end and in-chain sequence-regulated polymers were synthesized, most of which cannot be achieved by radical SUMI. In addition, we explored the application of these sequence-regulated polymers in the preparation of miktoarm star polymers, delivery of photosensitizers, and solubilization of fluorescence probes. The development of SUMI with a new mechanism will certainly broaden the scope of structures and sequences in precise vinyl-based polymers.

Fast Living 3D Printing via Free Radical Promoted Cationic RAFT Polymerization

The application of reversible deactivation radical polymerization techniques in 3D printing is emerging as a powerful method to build "living" polymer networks, which can be easily postmodified with various functionalities. However, the building speed of these systems is still limited compared to commercial systems. Herein, a digital light processing (DLP)-based 3D printing system via photoinduced free radical-promoted cationic reversible addition-fragmentation chain transfer polymerization of vinyl ethers, which can build "living" objects by a commercial DLP 3D printer at a relatively fast building speed (12.99 cm h^-1 ), is reported. The polymerization behavior and printing conditions are studied in detail. The livingness of the printed objects is demonstrated by spatially controlled postmodification with a fluorescent monomer.

Synthesis and Degradation of Vinyl Polymers with Evenly Distributed Thioacetal Bonds in Main Chains: Cationic DT Copolymerization of Vinyl Ethers and Cyclic Thioacetals

We report a novel method to synthesize degradable poly(vinyl ether)s with cleavable thioacetal bonds periodically arranged in the main chains using controlled cationic copolymerization of vinyl ethers with a 7-membered cyclic thioacetal (7-CTA) via degenerative chain transfer (DT) to the internal thioacetal bonds. The thioacetal bonds, which are introduced into the main chain by cationic ring-opening copolymerization of 7-CTA with vinyl ethers, serve as in-chain dormant species to allow homogeneous propagation of vinyl ethers for all internal segments to afford copolymers with controlled overall and segmental molecular weights. The obtained polymers can be degraded into low- and controlled-molecular-weight polymers with narrow molecular weight distributions via hydrolysis. Various vinyl ethers with hydrophobic, hydrophilic, and functional pendants are available. Finally, one-pot synthesis of multiblock copolymers and their degradation into diblock copolymers are also achieved.

Visible light-controlled living cationic polymerization of methoxystyrene

Photo-controlled living polymerization has received great attention in recent years. However, despite the great success therein, the report on photo-controlled living cationic polymerization has been greatly limited. We demonstrate here a novel decolorable, metal-free and visible light-controlled living cationic polymerization system by using tris(2,4-dimethoxyphenyl)methylium tetrafluoroborate as the photocatalyst and phosphate as the chain transfer agent (CTA) for polymerization of 4-methoxystyrene. This polymerization reaction under green LED light irradiation shows clear living characteristics including predictable molar mass, low molar-mass dispersity (Đ = 1.25), and sequential polymerization capability. In addition, the photocatalytic system exits excellent "on-off" photo switchability and shows the longest "off period" of 36 h up to now for photo-controlled cationic polymerization. Furthermore, the residual photo-catalyst is easily deactivated and decolored with addition of a base after the polymerization. The present study has extended the photo-controlled living cationic polymerization systems with new organic photocatalysts, phosphate CTA and polymerizable monomer as well as the new properties of excellent photostability and in-situ decolored capacity.

Asymmetric Cationic Polymerization of Benzofuran through a Reversible Chain-Transfer Mechanism: Optically Active Polybenzofuran with Controlled Molecular Weights

Benzofuran (BzF) is a prochiral, 1,2-disubstituted, unsymmetric cyclic olefin that can afford optically active polymers by asymmetric polymerization, unlike common acyclic vinyl monomers. Although asymmetric cationic polymerization of BzF was reported by Natta et al. in the 1960s, the polymer structure has not been clarified, and there are no reports on molecular weight control. Herein, we report dual control of the optical activity and molecular weight of poly(BzF) using thioether-based reversible chain-transfer agents for asymmetric cationic polymerization with β-amino acid derivatives as chiral additives and aluminum chloride as a catalyst. This asymmetric moderately living cationic polymerization leads to an increase in molecular weight and specific optical rotation with monomer conversion. In addition, asymmetric block polymers consisting of opposite absolute configurational segments were synthesized using both enantiomers sequentially as chiral additives. Finally, a comprehensive analysis of the polymerization products and the model reaction revealed that the optical activity of poly(BzF) originates from the threo-diisotactic structure, which occurs by regio-, trans-, and enantioselective propagation.

Acridinium salts as photoredox organocatalysts for photomediated cationic RAFT and DT polymerizations of vinyl ethers

A series of acridinium salts with high excited-state oxidative power are employed as photoredox organocatalysts for photomediated cationic RAFT and DT polymerizations under visible light.

Radical Homopolymerization of Vinyl Ethers Activated by Li+-π Complexation in the Presence of CH3OLi and LiI

In this study, we develop a direct, thermally initiated radical homopolymerization of vinyl ethers mediated by lithium salts CH3OLi and LiI. In the case of vinyl ether monomers having a...

Moisture tolerant cationic RAFT polymerization of vinyl ethers

Cationic reversible addition—fragmentation chain transfer (RAFT) polymerizations have permitted the controlled polymerization of vinyl ethers and select styrenics with predictable molar masses and easily modified thiocarbonylthio chain ends. However, most...

The influence of thiocarbonylthio compounds on the B(C6F5)3 catalyzed cationic polymerization of styrene

When applied to the cationic polymerization of styrene, thiocarbonylthio compounds can lead to a dual control mechanism, where degenerative chain transfer occurs concurrent with a reversible addition mechanism.

Brønsted Acid Catalyzed Stereoselective Polymerization of Vinyl Ethers

Isotactic poly(vinyl ether)s (PVEs) have recently been identified as a new class of semicrystalline thermoplastics with a valuable combination of mechanical and interfacial properties. Currently, methods to synthesize isotactic PVEs are limited to strong Lewis acids that require a high catalyst loading and limit the accessible scope of monomer substrates for polymerization. Here, we demonstrate the first Brønsted acid catalyzed stereoselective polymerization of vinyl ethers. A single-component imidodiphosphorimidate catalyst exhibits a sufficiently low pK_a to initiate vinyl ether polymerization and acts as a chiral conjugate base to direct the stereochemistry of monomer addition to the oxocarbenium ion reactive chain end. This Brønsted acid catalyzed stereoselective polymerization enabled an expanded substrate scope compared to previous methods, the use of chain transfer agents to lower catalyst loading, and the capability to recycle the catalyst for multiple polymerizations.

Controlling Polymer Molecular Weight Distribution through a Latent Mediator Strategy with Temporal Programming

Polymer molecular weight distribution (MWD) is a key parameter of polymers. Here we present a robust method for controlling polymer MWD in controlled cationic polymerizations. A latent mediator strategy was designed and combined with temporal programming to regenerate mediators at different times during polymerization. Both the breadths and shapes of MWD curves were tuned easily by adjusting an external light source. Bimodal, trimodal, and tetramodal distributions were obtained, and the breadths could be varied from 1.06 to 2.09. Polymers with different MWDs prepared by this method had good chain end fidelity, which was demonstrated with successful chain-extension experiments. In addition, the introduction of temporal programming with a computer-controlled single chip for the light source opened an avenue for the use of artificial intelligence in polymer synthesis.

Hybridization of Step-/Chain-Growth and Radical/Cationic Polymerizations Using Thioacetals as Key Components for Triblock, Periodic and Random Multiblock Copolymers with Thermoresponsiveness

A novel strategy for synthesizing a series of multiblock copolymers is developed by combining radical/cationic step-growth polymerizations of dithiols and divinyl ethers and chain-growth cationic degenerative chain-transfer (DT) polymerizations of vinyl ethers using thioacetals as key components. The combination of radical step-growth polymerization and a cationic thiol-ene reaction or cationic step-growth polymerization enables the synthesis of a series of macro chain-transfer agents (CTAs) composed of poly(thioether) and thioacetal groups at different positions. The resulting products are 1) bifunctional macro CTAs with thioacetal groups at both chain ends, 2) periodic macro CTAs periodically having thioacetal groups in the main chain, and 3) random macro CTAs randomly having thioacetal groups in the main chain. Subsequently, the obtained macro CTAs are used for chain-growth cationic DT polymerization of methoxyethyl vinyl ether (MOVE) to result in 1) triblock, 2) periodic, and 3) random multiblock copolymers consisting of poly(thioether) and poly(MOVE) segments. All these triblock and multiblock copolymers composed of hydrophobic poly(thioether) and hydrophilic poly(MOVE) segments show an amphiphilic tendency to form characteristic micelles in aqueous solutions. In addition, due to the thermoresponsive poly(MOVE) segments, the obtained copolymers exhibit lower critical solution temperatures that depend on the segment sequences and lengths.

Near-Infrared, Light-Induced Cationic and Radical RAFT Polymerization Catalyzed by Iron Complex

A near-infrared (NIR) light induced controlled cationic polymerization is presented here. The halide abstraction reaction between the cyclopentadienyl iron dicarbonyl dimer (Fe₂(Cp)₂(CO)₄) and an organic halide is utilized to generate initial radicals or cations under mild conditions, which can be further combined with both radical and cationic reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined poly(vinyl ether)s and polyacrylates are prepared successfully under NIR light by this method. The excellent penetration ability of NIR light through thick barriers has been verified by polymerization in the presence of an A4 paper. In addition, iron-based radical polymerization has been used for three-dimensional (3D) printing to fabricate materials with different thicknesses.

tert-Butyl Esters as Potential Reversible Chain Transfer Agents for Concurrent Cationic Vinyl-Addition and Ring-Opening Copolymerization of Vinyl Ethers and Oxiranes

tert-Butyl esters are demonstrated to function as chain transfer agents (CTAs) in the cationic copolymerization of vinyl ether (VE) and oxirane via concurrent vinyl-addition and ring-opening mechanisms. In the copolymerization of isopropyl VE and isobutylene oxide (IBO), the IBO-derived propagating species reacts with tert-butyl acetate to generate a copolymer chain with an acetoxy group at the ω-end. This reaction liberates a tert-butyl cation; hence, a polymer chain with a tert-butyl group at the α-end is subsequently generated. Other tert-butyl esters also function as CTAs, and the substituent attached to the carbonyl group affects the chain transfer efficiency. In addition, ethyl acetate does not function as a CTA, which suggests the importance of the liberation of a tert-butyl cation for the chain transfer process. Chain transfer reactions by tert-butyl esters potentially occur reversibly through the reaction of the propagating cation with the ester group at the ω-end of another chain.

Polymer-Supported Phosphoric, Phosphonic and Phosphinic Acids-From Synthesis to Properties and Applications in Separation Processes

Efficient separation technologies are crucial to the environment and world economy. The challenge posed to scientists is how to engineer selectivity towards a targeted substrate, especially from multicomponent solutions. Polymer-supported reagents have gained a lot of attention in this context, as they eliminate a lot of inconveniences concerning widely used solvent extraction techniques. Nevertheless, the choice of an appropriate ligand for immobilization may be derived from the behavior of soluble compounds under solvent extraction conditions. Organophosphorus compounds play a significant role in separation science and technology. The features they possess, such as variable oxidation states, multivalence, asymmetry and metal-binding properties, highlight their status as a unique and versatile class of compounds, capable of selective separations proceeding through different mechanisms. This review provides a detailed survey of polymers containing phosphoric, phosphonic and phosphinic acid functionalities in the side chain and covers main advances in the preparation and application of these materials in separation science, including the most relevant synthesis routes (Arbuzov, Perkow, Mannich, Kabachnik-Fields reactions, etc.), as well as the main stages in the development of organophosphorus resins and the most important achievements in the field.

Thiol-Ene Cationic and Radical Reactions: Cyclization, Step-Growth, and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol-ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step-growth polymerization between a dithiol and divinyl ether. p-Toluenesulfonic acid (PTSA) induced a cationic thiol-ene reaction to generate a thioacetal in high yield, whereas 2,2'-azobisisobutyronitrile resulted in a radical thiol-ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high-dilution conditions, the cationic and radical reactions resulted in 16- and 18-membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step-growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.

Manganese carbonyl induced cationic reversible addition–fragmentation chain transfer (C-RAFT) polymerization under visible light

Vinyl ethers were polymerized by C-RAFT polymerization on the basis of halide abstraction reaction of manganese carbonyl and organic halide.

Cationic polymerization of vinyl monomers using halogen bonding organocatalysts with varied activity

Cationic polymerization of vinyl monomers was investigated using non-ionic and ionic halogen bonding organocatalysts.

Alcohol mediated degenerate chain transfer controlled cationic polymerisation of para-alkoxystyrene

In this report we demonstrate methanol as an effective degenerative chain transfer agent to control the cationic polymerisation (initiated by triflic acid) of electron rich p-alkoxy-styrenes, such as p-methoxystyrene (p-MOS).

Synthesis of PEVE-b-P(CTFE-alt-EVE) block copolymers by sequential cationic and radical RAFT polymerization

Block copolymers containing chlorotrifluoroethylene (CTFE) are relatively rare.

Synthesis of copolymers with an exact alternating sequence using the cationic polymerization of pre-sequenced monomers

Alternating copolymers of styrene/methyl vinyl ether and styrene/vinyl alcohol were synthesized. The effect of an alternating sequence on the fluorescence emissions of the products was investigated.

One-shot controlled/living copolymerization for various comonomer sequence distributions via dual radical and cationic active species from RAFT terminals

One-shot control of comonomer sequence distributions was demonstrated by dual radical and cationic copolymerization using RAFT mediator.

Diverse approaches to star polymers via cationic and radical RAFT cross-linking reactions using mechanistic transformation

Core cross-linked star polymers were synthesizedviacationic RAFT polymerization and three different approaches in combination with a radical RAFT mechanism.

Diversifying Cationic RAFT Polymerization with Various Counteranions: Generation of Cationic Species from Organic Halides and Various Metal Salts

A combination of hydrogen chloride adduct of isobutyl vinyl ether (IBVE-HCl) and various metal salts (AgOTf, AgPF₆, AgSbF₆, NaBArF (BArF: [3,5-(CF₃)₂Ph]₄B)) efficiently generated initiating cationic species with different low, weakly, or non-nucleophilic counteranions (OTf^-, PF₆^-, SbF₆^-, BArF^-) and induced a cationic reversible-addition-fragmentation chain-transfer (RAFT) or degenerative chain-transfer (DT) polymerization of IBVE, ethyl vinyl ether, p-methoxystyrene, and α-methylstyrene (αMS) in the presence of appropriate thiocarbonylthio compounds or thioethers as reversible chain-transfer agents. The polymerization behaviors in terms of polymerization rate, polymer molecular weight, terminal structure, and stereochemistry were affected by the counteranions, whereas the molecular weight control was achieved by appropriate RAFT or DT agents for all of these counteranions. With a weakly or noncoordinating BArF anion and a trithiocarbonate, a nearly atactic poly(IBVE) with a narrow molecular weight distribution (M_w/M_n < 1.1) was obtained. When using nonoxoanions, such as SbF₆^-, PF₆^-, and BArF^-, in the presence of thioethers, controlled cationic polymerization of αMS was achieved while frequent irreversible β-proton elimination occurred using TfO^-. Thus, this method widens the scope of living or controlled cationic polymerizations with various counteranions.

Metal-free RAFT cationic polymerization of p-methoxystyrene with HCl·Et2O using a xanthate-type RAFT cationogen

A xanthate-type RAFT cationogen (IBEX) mediates the metal-free cationic polymerization of pMOS with HCl·Et₂O via the degenerative addition–fragmentation of cationic species, i.e. the RAFT mechanism.