Retraction: Investigation of anticorrosive, antibacterial and in vitro biological properties of a sulphonated poly(etheretherketone)/strontium, cerium co-substituted hydroxyapatite composite coating developed on surface treated surgical grade stainless steel for orthopedic applications

Retraction of ‘Investigation of anticorrosive, antibacterial and in vitro biological properties of a sulphonated poly(etheretherketone)/strontium, cerium co-substituted hydroxyapatite composite coating developed on surface treated surgical grade stainless steel for orthopedic applications’ by D. Rajeswari et al., RSC Adv., 2014, 4, 61525–61536. https://doi.org/10.1039/C4RA12207K.

In-vivo bone remodeling potential of Sr-d-Ca-P /PLLA-HAp coated biodegradable ZK60 alloy bone plate

Magnesium and its alloys are widely applied biomaterials due to their biodegradability and biocompatibility. However, rapid degradation and hydrogen gas evolution hinder its applicability on a commercial scale. In this study, we developed an Mg alloy bone plate for bone remodeling and support after a fracture. We further coated the Mg alloy plate with Sr-D-Ca-P (Sr dopped Ca-P coating) and Sr-D-Ca-P/PLLA-HAp to evaluate and compare their biodegradability and biocompatibility in both in vitro and in vivo experiments. Chemical immersion and dip coating were employed for the formation of Sr-D-Ca-P and PLLA-HAp layers, respectively. In vitro evaluation depicted that both coatings delayed the degradation process and exhibited excellent biocompatibility. MC3T3-E1cells proliferation and osteogenic markers expression were also promoted. In vivo results showed that both Sr-D-Ca-P and Sr-D-Ca-P/PLLA-HAp coated bone plates had slower degradation rate as compared to Mg alloy. Remarkable bone remodeling was observed around the Sr-D-Ca-P/PLLA-HAp coated bone plate than bare Mg alloy and Sr-D-Ca-P coated bone plate. These results suggest that Sr-D-Ca-P/PLLA-HAp coated Mg alloy bone plate with lower degradation and enhanced biocompatibility can be applied as an orthopedic implant.

A comprehensive review of properties of the biocompatible thin films on biodegradable Mg alloys

Magnesium (Mg) and its alloys have attracted attention as biodegradable materials for biomedical applications owing to their mechanical properties being comparable to that of bone. Mg is a vital trace element in many enzymes and thus forms one of the essential factors for human metabolism. However, before being used in biomedical applications, the early stage or fast degradation of Mg and its alloys in the physiological environment should be controlled. The degradation of Mg alloys is a critical criterion that can be controlled by a surface modification which is an effective process for conserving their desired properties. Different coating methods have been employed to modify Mg surfaces to provide good corrosion resistance and biocompatibility. This review aims to provide information on different coatings and discuss their physical and biological properties. Finally, the current withstanding challenges have been highlighted and discussed, followed by shedding some light on future perspectives.

Electrochemical Surface Biofunctionalization of Titanium through Growth of TiO2 Nanotubes and Deposition of Zn Doped Hydroxyapatite

The current research aim is to biofunctionalize pure titanium (Ti, grade IV) substrate with titania nanotubes and Zn doped hydroxyapatite-based coatings by applying a duplex electrochemical treatment, and to evaluate the influence of Zn content on the physico-chemical properties of hydroxyapatite (HAp). The obtained nanostructured surfaces were covered with HAp-based coatings doped with Zn in different concentrations by electrochemical deposition in pulsed galvanostatic mode. The obtained surfaces were characterized in terms of morphology, elemental and phasic composition, chemical bonds, roughness, and adhesion. The nanostructured surface consisted of titania nanotubes (NT), aligned, vertically oriented, and hollow, with an inner diameter of ~70 nm. X-ray Diffraction (XRD) analysis showed that the nanostructured surface consists of an anatase phase and some rutile peaks as a secondary phase. The morphology of all coatings consisted of ribbon like-crystals, and by increasing the Zn content the coating became denser due to the decrement of the crystals’ dimensions. The elemental and phase compositions evidenced that HAp was successfully doped with Zn through the pulsed galvanostatic method on the Ti nanostructured surfaces. Fourier Transform Infrared spectroscopy (FTIR) and XRD analysis confirmed the presence of HAp in all coatings, while the adhesion test showed that the addition of a high quantity leads to some delamination. Based on the obtained results, it can be said that the addition of Zn enhances the properties of HAp, and through proper experimental design, the concentration of Zn can be modulated to achieve coatings with tunable features.

Preparation and characterization of antibacterial nano cerium oxide/chitosan/hydroxyethylcellulose/polyethylene glycol composite films

Due to the rapidly increasing biological applications and antibacterial properties of versatile nano cerium oxide particles, the effects of these particles on chitosan-based films were investigated. Chitosan-based composite films with and without cerium oxide nanoparticles (NPs) were prepared by a casting method. Hydroxyethylcellulose (HEC) was used for the flexibility of films, and polyethylene glycol (PEG) was used as a plasticizer in the blending stage of film preparation. Characterizations of films were done by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), and dynamic mechanical analyzer (DMA). Cerium oxide nanoparticle incorporation enhanced the antibacterial activity of chitosan-based films against Escherichia coli and Staphylococcus aureus. This composite film is proposed as packaging or coating material because of its flexibility, antibacterial efficacy, and good mechanical strength.

Tailoring Cu substituted hydroxyapatite/functionalized multiwalled carbon nanotube composite coating on 316L SS implant for enhanced corrosion resistance, antibacterial and bioactive properties

The aim of the present work is to study the potential change in the antibacterial properties of Cu-hydroxyapatite/functionalized multiwall carbon nanotube (HA/f-MWCNT) composite coated heterogeneous implant surfaces against Gram positive and Gram-negative microorganism and to reveal the possible contribution of surface corrosion effects arising in stimulated body fluid. Novel spray pyrolysis instrument designed with double nozzle was used for the fabrication of Cu-hydroxyapatite/f-MWCNT film on 316L stainless steel (SS). The Cu-hydroxyapatite/MWCNT coated bioimplant was characterized by a series of techniques to identify the crystallinity, chemical bonds, surface morphology and elemental composition. The results disclose that the coated implants exhibit highly crystalline nature with the space group of P6_3mc and spherical shaped morphology. The corrosion current density revealed a remarkable decrease from 6.8 to 3.8 μA suggesting that the Cu substituted hydroxyapatite/f-MWCNT composite coating provided higher barrier properties which is beneficial to achieve higher corrosion protection of 316L SS implant. The hybrid Cu-hydroxyapatite-MWCNT composite revealed better antibacterial ability than HA/MWCNT for both gram positive and gram-negative bacteria with a maximum inhibition zone of 13-17 mm, compared with hydroxyapatite/f-MWCNT. The antibacterial ability of the Cu-hydroxyapatite/f-MWCNT nanocomposites was effective against Escherichia coli compared with other microorganisms. The Cu-hydroxyapatite/f-MWCNT nanocomposite exhibited that the coated material is nontoxic, biocompatible and suitable for biomedical application.

The Advances of Ceria Nanoparticles for Biomedical Applications in Orthopaedics

The ongoing biomedical nanotechnology has intrigued increasingly intense interests in cerium oxide nanoparticles, ceria nanoparticles or nano-ceria (CeO2-NPs). Their remarkable vacancy-oxygen defect (VO) facilitates the redox process and catalytic activity. The verification has illustrated that CeO2-NPs, a nanozyme based on inorganic nanoparticles, can achieve the anti-inflammatory effect, cancer resistance, and angiogenesis. Also, they can well complement other materials in tissue engineering (TE). Pertinent to the properties of CeO2-NPs and the pragmatic biosynthesis methods, this review will emphasize the recent application of CeO2-NPs to orthopedic biomedicine, in particular, the bone tissue engineering (BTE). The presentation, assessment, and outlook of the orthopedic potential and shortcomings of CeO2-NPs in this review expect to provide reference values for the future research and development of therapeutic agents based on CeO2-NPs.

In-vitro biocompatibility, bioactivity and photoluminescence properties of Eu3+ /Sr2+ dual-doped nano-hydroxyapatite for biomedical applications

In the present investigation, we have successfully synthesized luminescent Eu³⁺ -doped and Eu³⁺ /Sr²⁺ codoped hydroxyapatite (HA) nanoparticles through sol-gel assisted precipitation method with the aim of developing novel biomaterials containing osteoblast mineral (Sr²⁺ ) and luminescence activator (Eu³⁺ ). The structure, morphology, thermal stability, and luminescence properties of the resultant spherical nanoparticles (50-100 nm diameters) were studied. Moreover, the in-vitro bioactivity of Eu_0.1 Sr_0.1 HA nanoparticles was investigated by immersing in the simulated body fluid for many weeks. The antimicrobial activity results against gram positive and gram negative bacterial stains, showed better resistivity for the Eu_0.1 Sr_0.1 HA among the other compositions. The MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay of live/dead cells cultured with Eu³⁺ /Sr²⁺ -doped HA nanoparticles retained its normal morphology and did not show a significant impact on cell proliferation at various incubation days, which evidence for the material's superior biocompatible nature even at a higher concentration of 375 µg/mL. Thus, the incorporation of dual ions in HA nanoparticles with strong luminescence properties develops potential biomaterial for live cell imaging and in nanomedicine. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2191-2201, 2018.

One-step fabrication of biomimetic superhydrophobic surface by electrodeposition on magnesium alloy and its corrosion inhibition

A facile, rapid and one-step electrodeposition process has been employed to construct a superhydrophobic surface with micro/nano scale structure on a Mg-Sn-Zn (TZ51) alloy, which is expected to be applied as a biodegradable biomedical implant materials. By changing the electrodeposition time, the maximum contact angle of the droplet was observed as high as 160.4°±0.7°. The characteristics of the as-prepared surface were conducted by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). Besides, the anti-corrosion performance of the coatings in stimulated body fluid (SBF) solution were investigated by electrochemical measurement. The results demonstrated that the anti-corrosion property of superhydrophobic surface was greatly improved. This method show beneficial effects on the wettability and corrosion behavior, and therefore provides a efficient route to mitigate the undesirable rapid corrosion of magnesium alloy in favor of application for clinical field.

Inhibitor encapsulated, self-healable and cytocompatible chitosan multilayer coating on biodegradable Mg alloy: a pH-responsive design

The design of functional biomaterials that respond intelligently to external stimuli has become a rapidly growing area with widespread interest. This work contributes to the development of a feedback-active anticorrosion system with intriguing self-healing ability to protect magnesium (Mg) from biocorrosion. The system was constituted by an inner micro/nano-porous, ceramic-like pre-coating developed readily from the substrate, and an outermost inhibitor (nanosized cerium (Ce) oxides) containing chitosan (CS) multilayers. Here, the pre-coating acted as both an "anchoring" and a "barrier" layer to acquire structural integrity and improved impedance, respectively. Green CS served as cargo for Ce to be entrapped, harnessing Ce-NH₂ complexation chemistry. The coating barrier properties were evaluated by electrochemical impedance spectroscopy. The active corrosion inhibition was assessed by immersion degradation tests with respect to Mg²⁺ release, pH alteration, crack development, and scanning Kelvin potential. To our delight, the coatings effectively protected the substrate from biocorrosion in vitro compared with bare alloys. Putatively, the pH-triggered formation of Ce oxide precipitation, along with the pH-buffering activity and movable swelling capacity of CS macromolecules, should have contributed to restraining the anodic activity and healing the cracks/defects dynamically. Furthermore, the coated substrate had the biocompatibility to elicit better attachment and growth of osteoblasts.

Controlling the corrosion rate and behavior of biodegradable magnesium by a surface-immobilized ultrathin 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) film

An ultra-thin organometallic-like layer was formed on pure magnesium to control the rate and manner of corrosion.

Introducing a composite coating containing CNTs with good corrosion properties: characterization and simulation

A duplex composite coating containing carbon nanotubes (CNTs) was successfully deposited on a Mg–Zn–Ca alloy by an atmospheric plasma spraying (APS) technique.

Fabrication of divalent ion substituted hydroxyapatite/gelatin nanocomposite coating on electron beam treated titanium: mechanical, anticorrosive, antibacterial and bioactive evaluations

The strontium, magnesium and zinc substituted hydroxyapatite/gelatin (M-HAP/Gel) nanocomposite coating on electron beam treated titanium will definitely be an effective implant material for better cell growth in orthopedic applications.