Sequestration of Cr(VI) onto polyethyleneimine-derivatized cellulose and its effect on the enzymatic degradation and microbiome viability

The extremely hazardous nature of Cr(VI) necessitates its sequestration in a sustainable and effective manner. Cellulose-derived materials, known for their eco-friendly properties, are widely employed in environmental remediation. To improve its adsorption capabilities for heavy metals, cellulose is often derivatized with moieties like amine, thiol, carboxylic acid, etc. The current work compares the efficacy of cellulose derivatized with polyethyleneimine-a nitrogen-rich biocompatible polymer-obtained via two synthetic approaches, resulting in adsorbents termed PEI-MAAC and PEI-DAC. PEI-MAAC represents cellulose grafted with methacrylic acid followed by PEI immobilization, while PEI-DAC involves PEI immobilization on dialdehyde cellulose. The adsorption of Cr(VI) over the two categories of adsorbents is initially optimized for key parameters, including pH, adsorbent dosage and metal concentration. Further analysis of adsorption isotherms and kinetics revealed the superior efficacy of PEI-DAC. To evaluate the environmental impact of these Cr(VI)-adsorbed cellulose-derived materials, their enzymatic degradation behavior and effects on the soil microbiome have been explored. It has been found that the Cr(VI) adsorption retards the enzymatic degradation rate of these materials, while no significant adverse effects on the soil microbiome have been observed. The study highlights the potential of cellulose-derived materials as sustainable candidates for heavy metal sequestration and environmental remediation.

Application of nano remediation of mine polluted in acid mine drainage water using machine learning model

Acid mine drainage (AMD) is the term used to describe drainage from coal mines with high sulfur-bearing rocks. The oxidative weathering of metal sulfides leads to AMD. The acidic environment corrodes more harmful compounds in the soil, which is spread throughout the working area. One such significant metal is copper, which is extracted in massive quantities from ores rich in sulfide. A copper-extraction resin might be created by combining diatomaceous earth (DE) particles with polyethyleneimine (PEI), which is shown to have great selectivity and affinity for copper. In this effort, PEI-DE particles' copper absorption level was examined by using synthetic and actual acid mine drainage samples at varied pH values. The findings of the copper uptake particles have been examined through the Support Vector Machine (SVM) model. Using the n-fold 14 cross-validation approach, the quantities of parameters and C are estimated to be 0.001 and 0.01, respectively. The SVM analysis was correct, and the findings indicated that copper could bind to the material efficiently and preferentially at pH 4. Subsequent water elution studies at a pH value of 1 confirmed the pH-reliant interaction between dissolved Cu and PEI by demonstrating full release of the adsorbed Cu. In this research, the copper absorption of PEI-DE particles from synthetic and genuine AMD specimens was studied based on several pH conditions. The findings suggest that copper may attach to the material effectively and preferentially at pH 4. Studies of filtering water at pH1 later confirmed that all of the adsorbed Cu was released. This shows that the interaction between PEI and dissolved Cu depends on PH.

Interaction of thin polyethyleneimine layer with the iron surface and its effect on the electrochemical behavior

Polymer-coated metals may act as biodegradable orthopedic implants with adjustable corrosion rates. Metallic surfaces represent a dynamic system with specific interactions occurring after the material is implanted into the human body. An additional layer, in the form of polymeric thin film, changes the nature of this metal-body fluids interface. Moreover, the interaction between polymer and metal itself can differ for various systems. Iron-based material modified with a thin layer of polyethyleneimine (PEI) coating was prepared and studied as potential absorbable implant. Computational methods were employed to study the interaction between the metallic surface and polymer functional monomer units at atomic levels. Various spectroscopical and optical methods (SEM, AFM, Confocal, and Raman spectroscopy) were also used to characterize prepared material. Electrochemical measurements have been chosen to study the polymer adsorption process onto the iron surface and corrosion behavior which is greatly influenced by the PEI presence. The adsorption mechanism of PEI onto iron was proposed alongside the evaluation of Fe and Fe-PEI degradation behavior studied using the impedance method. Bonding via amino -NH₂ group of PEI onto Fe and enhanced corrosion rate of coated samples were observed and confirmed.

Synthesis and Characterization of Polyethylenimine-Silica Nanocomposite Microparticles

A novel procedure for the synthesis of polyethylenimine (PEI)-silica nanocomposite particles with high adsorption capacities has been developed based on an emulsion templating concept. The exceptional chelating properties of PEI as the parent polymer for the particle core promote the binding abilities of the resulting composite for charged species. Further, the subsequent introduction of silica via the self-catalyzed hydrolysis of tetraethoxysilane facilitates production of robust composite particles with smooth surfaces, enabling potential use in multiphase environments. To enable tailored application in solid/liquid porous environments, the production of particles with reduced sizes was attempted by modulating the shear rates and surfactant concentrations during emulsification. The use of high-speed homogenization resulted in a substantial decrease in average particle size, while increasing surfactant loading only had a limited effect. All types of nanocomposites produced demonstrated excellent binding capacities for copper ions as a test solute. The maximum binding capacities of the PEI-silica nanocomposites of 210-250 mg/g are comparable to or exceed those of other copper binding materials, opening up great application potential in resources, chemical processing, and remediation industries.

Negatively charged gold nanoclusters protect against diabetic cardiomyopathy by inhibiting mitophagy

Negatively charged AuNCs were found to stabilize the membrane potential and inhibit mitophagy, thereby preventing diabetic cardiomyopathy.

Development of Pectin-Based Aerogels with Several Excellent Properties for the Adsorption of Pb2

Traditional aerogels lack specific functional groups for the adsorption of Pb2+, which results in a low adsorption capacity and limits the application scope. Novel porous pectin-based aerogels (PPEAs) were prepared by incorporating polyethylenimine (PEI) using ethylene glycol diglycidyl ether (EGDE) as a cross-linker for the removal of Pb2+ from water. The cross-linking mechanism, morphology, mechanical strength, thermal stability, adsorption properties, and mechanism of the aerogels were investigated. The aerogels possessed several desirable features, such as a large maximum Pb2+ adsorption capacity (373.7 mg/g, tested at pH 5.0), ultralight (as low as 63.4 mg/cm3), high mechanical strength (stress above 0.24 MPa at 50% strain), and easy recyclability. Meanwhile, the equilibrium adsorption data was well described by the Langmuir-Freundlich (Sips) model and the kinetic adsorption process was well fitted using the pseudo-second-order model. The donor groups, such as -NH2, and oxygen-containing functional groups were responsible for the Pb2+ adsorption, which was confirmed by the FTIR and XPS analysis. The excellent characteristics mean that PPEAs are highly effective adsorbents in the remediation of lead-containing wastewater.

Assessment of hexavalent chromium (VI) biosorption competence of indigenous Aspergillus tubingensis AF3 isolated from bauxite mine tailing

The intention of this research was to find the most eminent metal tolerant and absorbing autochthonous fungal species from the waste dump of a bauxite mine. Out of the 4 (BI-1, BI-II, BI-III, and BI-IV) predominant isolates, BI-II had an excellent metal tolerance potential against most of the metals in the subsequent order: Cr(VI) (1500), Cu(II) (600), Pb(II) (500), and Zn(II) (500-1500 μg mL^-1). BI-II had shown tolerance to Cr(VI) up to 1500 mg L^-1. The excellent metal tolerant isolate was characterized and identified as Aspergillus tubingensis AF3 through 18S rRNA sequencing method and submitted to GenBank and received an accession number (MN901243). A. tubingensis AF3 had the efficiency to absorb Cr(VI) and Cu(II) at <70 & 46.3% respectively under the standard growth conditions. Under the optimized conditions (25 °C, pH 7.0, 0.5% of dextrose, and 12 days of incubation), A. tubingensis AF3 absorbed 74.48% of Cr(VI) in 12 days (reduction occurred as 822.3, 719.13, 296.66, and 255.2 mg L^-1 of Cr(VI) on the 3^rd, the 6^th, the 9^th and the 12^th day, respectively). The adsorbed metal was sequestered in the mycelia of the fungus in a precipitated form; it was confirmed by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray analysis (EDX) analyses. The possible biosorption mechanisms were analyzed by Fourier-Transform Infrared Spectroscopy (FTIR) analysis, the results showed the presence of N-H primary amines (1649.98 cm^-1) and Alkanes (914.30 cm^-1) in the cell wall of the fungus, while being treated with Cr(VI) they supported and enhanced the Cr(VI) absorption. The entire results concluded that the biomass of A. tubingensis AF3 had the potential to absorb a high concentration of Cr(VI).

Boosted Cr(VI) sorption coupled reduction from aqueous solution using quaternized algal/alginate@PEI beads

APEI beads (algal/alginate-PEI) were quaternized for enhancing the sorption of Cr(VI) (Q-APEI). The readily reduction of Cr(VI) into Cr(III) in acidic solution and in the presence of organic material constitute an additional phenomenon to be taken into account for the removal of Cr(VI) by Q-APEI. The optimal pH value for both the sorption and reduction of Cr(VI) was close to 2. The sorption isotherm was well described by the Sips model in batch system; the experimental maximum Cr(VI) sorption capacity of Q-APEI was 334 mg Cr(VI) g^-1, including a reduction yield close to 25%. The pseudo-second-order kinetic model (PSORE) and the Yan model fit the uptake kinetics and breakthrough curves, in a fixed-bed system with circulation or single-path modes, respectively. The mechanism of reduction-assisted sorption allows boosting the global removal of chromate. Furthermore, the testing of Cr(VI) for three successive sorption and desorption cycles shows the remarkable stability of the sorbent for Cr(VI) removal. The Cr(VI) sorption coupled reduction mechanism and interactions between the sorbent and Cr(VI) were further explained using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS).

Synthesis of Copper Nanoparticles Stabilized with Organic Ligands and Their Antimicrobial Properties

In this work, we report the synthesis of copper nanoparticles (Cu NPs), employing the chemical reduction method in an aqueous medium. We used copper sulfate pentahydrate (CuSO₄·5H₂O) as a metallic precursor; polyethylenimine (PEI), allylamine (AAM), and 4-aminobutyric acid (AABT) as stabilizing agents; and hydrated hydrazine as a reducing agent. The characterization of the obtained nanoparticles consisted of X-ray, TEM, FTIR, and TGA analyses. Through these techniques, it was possible to detect the presence of the used stabilizing agents on the surface of the NPs. Finally, a zeta potential analysis was performed to differentiate the stability of the nanoparticles with a different type of stabilizing agent, from which it was determined that the most stable nanoparticles were the Cu NPs synthesized in the presence of the PEI/AAM mixture. The antimicrobial activity of Cu/PEI/AABT toward P. aeruginosa and S. aureus bacteria was high, inhibiting both bacteria with low contact times and copper concentrations of 50–200 ppm. The synthesis method allowed us to obtain Cu NPs free of oxides, stable to oxidation, and with high yields. The newly functionalized Cu NPs are potential candidates for antimicrobial applications.

Highly stable branched cationic polymer-functionalized black phosphorus electrochemical sensor for fast and direct ultratrace detection of copper ion

Copper ions (Cu²⁺) is an indispensable trace element in the process of metabolism and intake of excessive Cu²⁺ may lead to fatal diseases such as Alzheimer's disease. It is highly demanding to develop a sensitive, selective and convenient method for Cu²⁺ detection. In this work, thin-layer structured polyethyleneimine (PEI) decorated black phosphorus (BP) nanocomposite is one-step synthesized for an electrochemical sensor toward direct detection of Cu²⁺. This sensor achieves a wide detection range of 0.25-177 μM, a low detection limit of 0.02 μM much below the Environmental Protection Agency (EPA) maximum contaminant levels for drinking water (20 μM for Cu²⁺), and much faster response (1.5 s response time) and simpler operation than the conventional tedious anodic stripping voltammetry, ranking one of the best among all reported Cu²⁺ sensor. The great sensing enhancement is mainly due to a synergistic effect of BP and PEI of the composite, of which the former offers the reactivity while the latter splits the thick BP to thin-layer structured PEI-BP composite for larger reaction area. Meanwhile, a flexible sensor has been successfully fabricated and applied in detecting of Cu²⁺ in real samples of river, confirming the application feasibility of PEI-BP sensor in water environment control.

Construction of a pH- and near-infrared irradiation-responsive nanoplatform for chemo-photothermal therapy

Au nanoclusters, decorated with graphene quantum dots (GQDs), were obtained through photocatalytic reduction of AuCl₄^3- by UV irradiation, and then cytarabine (Cyt) was loaded to the Au/GQDs via charge-dipole interactions. Mercaptopropionic acid (MPA) was anchored to the Cyt-loaded Au/GQDs through the formation of Au-S bond, which was further encapsulated by polyethyleneimine (PEI) via charge-dipole interactions. The delivery of Cyt from the quaternary complex (Au/GQDs/MPA/PEI) is pH-sensitive and can be modulated by near-infrared (NIR) irradiation. The results of cell viability test indicate that the developed nanoplatform can be used for chemo-photothermal combination therapy of cancer cells, and the efficacy of chemo-photothermal combination therapy is significantly higher than that of the single mode of photothermal therapy (PTT) or chemotherapy.

Cyclic Copper Uptake and Release from Natural Seawater-A Fully Sustainable Antifouling Technique to Prevent Marine Growth

Unwanted growth of fouling organisms on underwater surfaces is an omnipresent challenge for the marine industry, costing billions of dollars every year in the transportation sector alone. Copper, the most widely used biocide in antifouling paints, is at the brink of a total ban in being used in antifouling coatings, as it has become an existential threat to nontargeted species due to anthropogenic copper inputs into protected waters. In the current study, using a porous and cross-linked poly(ethylene imine) structure under marine and fouling environments, available copper from natural seawater was absorbed and electrochemically released back as a potent biocide at 1.3 V vs Ag|AgCl, reducing marine growth by 94% compared to the control electrode (coupon) at 0 V. The coating can also function as an electrochemical copper sensor enabling real-time monitoring of the electrochemical uptake and release of copper ions from natural seawater. This allows tailoring of the electrochemical program to the changing marine environments, i.e., when the vessels move from high-copper-contaminated waters to coastal regions with low concentrations of copper.

Removal of As(V), Cr(VI) and Cu(II) using novel amine functionalized composite nanofiltration membranes fabricated on ceramic tubular substrate

Novel amine functionalized composite membranes were prepared over tubular ceramic substrate using facile dip-coating and cross-flow filtration approach. The two fabricated membranes, P-60S and P-60S-EDTA with polyethyleneimine (PEI) and EDTA-modified PEI as functional layers respectively, were characterized in terms of EDX, FTIR, XPS, FESEM, AFM and contact angle analyses which confirmed their stable physical and chemical structure for use in high pressure application. Clean water permeability and MWCO study revealed the superior permeability and rejection efficiency of the P-60S-EDTA compared to the P-60S membrane. Incorporation of bulky EDTA molecules in the membrane functional layer simultaneously decreased pore size and increased membrane hydrophilicity. The removal of As(V), Cr(VI) and Cu(II) heavy metals by both membranes were found to be highly pH dependent and overall rejection improved in case of P-60S-EDTA membrane [99.82% for Cu(II), 96.75% for As(V) and 97.22% for Cr(VI)]. Interestingly, rejection of As(V) and Cr(VI) was significantly improved in presence of Cu(II) due to volume resistance provided by EDTA-Cu(II) complex towards the passage of other heavy metal ions. Excellent stability of P-60S-EDTA membrane in continuous operation of 36 h in both ideal and practical water environment suggests its promising application in real field heavy metal contaminated waste water treatment.

Custom-Made Ion Exchange Membranes at Laboratory Scale for Reverse Electrodialysis

Salinity gradient power is a renewable, non-intermittent, and neutral carbon energy source. Reverse electrodialysis is one of the most efficient and mature techniques that can harvest this energy from natural estuaries produced by the mixture of seawater and river water. For this, the development of cheap and suitable ion-exchange membranes is crucial for a harvest profitability energy from salinity gradients. In this work, both anion-exchange membrane and cation-exchange membrane based on poly(epichlorohydrin) and polyvinyl chloride, respectively, were synthesized at a laboratory scale (255 c m 2) by way of a solvent evaporation technique. Anion-exchange membrane was surface modified with poly(ethylenimine) and glutaraldehyde, while cellulose acetate was used for the cation exchange membrane structural modification. Modified cation-exchange membrane showed an increase in surface hydrophilicity, ion transportation and permselectivity. Structural modification on the cation-exchange membrane was evidenced by scanning electron microscopy. For the modified anion exchange membrane, a decrease in swelling degree and an increase in both the ion exchange capacity and the fixed charge density suggests an improved performance over the unmodified membrane. Finally, the results obtained in both modified membranes suggest that an enhanced performance in blue energy generation can be expected from these membranes using the reverse electrodialysis technique.

Facile Fabrication of Self-Healable and Antibacterial Soy Protein-Based Films with High Mechanical Strength

Soy protein isolate (SPI), a ubiquitous and readily available biopolymer, has drawn increasing attention because of its sustainability, abundance, and low price. However, the poor mechanical properties, tedious performance adjustments, irreversible damage, and weak microorganism resistance have limited its applications. In this study, a facile but delicate strategy is proposed to fabricate an excellently self-healable and remarkably antibacterial SPI-based material with high mechanical strength by integrating polyethyleneimine (PEI) and metal ions (Cu(II) or Zn(II)). The tensile strengths of the SPI/PEI-Cu-0.750 and SPI/PEI-Zn-0.750 films reach up to 10.46 ± 0.50 and 9.06 ± 0.62 MPa, which is 367.06 and 306.28% strength increase compared to that of neat SPI film, respectively. Due to abundant non-covalent bonds and low glass transition temperature of the network, both SPI/PEI-Cu and SPI/PEI-Zn films exhibit a satisfactory self-healing behavior even at room temperature. Furthermore, SPI/PEI-Cu and SPI/PEI-Zn films demonstrate high bacterial resistance against Escherichia coli and Staphylococcus aureus. This facile strategy of establishing dynamic networks in a biomaterial with numerous excellent properties will enormously expand the scope of its applications, especially in the field of recyclable and durable materials.

Environmental Copper Sensor Based on Polyethylenimine-Functionalized Nanoporous Anodic Alumina Interferometers

Anthropogenic copper pollution of environmental waters from sources such as acid mine drainage, antifouling paints, and industrial waste discharge is a major threat to our environment and human health. This study presents an optical sensing system that combines self-assembled glutaraldehyde-cross-linked double-layered polyethylenimine (PEI-GA-PEI)-modified nanoporous anodic alumina (NAA) interferometers with reflectometric interference spectroscopy (RIfS) for label-free, selective monitoring of ionic copper in environmental waters. Calibration of the sensing system with analytical solutions of copper shows a linear working range between 1 and 100 mg L-1, and a low limit of detection of 0.007 ± 0.001 mg L-1 (i.e., ∼0.007 ppm). Changes in the effective optical thickness (ΔOTeff) of PEI-GA-PEI-functionalized NAA interferometers are monitored in real-time by RIfS, and correlated with the amount of ionic copper present in aqueous solutions. The system performance is validated through X-ray photoelectron spectroscopy (XPS) and the spatial distribution of copper within the nanoporous films is characterized by time-of-flight-secondary ion mass spectroscopy (TOF-SIMS). The specificity and chemical selectivity of the PEI-GA-PEI-NAA sensor to Cu2+ ions is verified by screening six different metal ion solutions containing potentially interfering ions such as Al3+, Cd2+, Fe3+, Pb2+, Ni2+, and Zn2+. Finally, the performance of the PEI-GA-PEI-NAA sensor for real-life applications is demonstrated using legacy acid mine drainage liquid and tap water for qualitative and quantitative detection of copper ions. This study provides new opportunities to develop portable, cost-competitive, and ultrasensitive sensing systems for real-life environmental applications.

Gold-copper nanoshell dot-blot immunoassay for naked-eye sensitive detection of tuberculosis specific CFP-10 antigen

Herein, a straightforward and highly specific dot-blot immunoassay was successfully developed for the detection of Mycobacterium tuberculosis antigen (10 kDa culture filtrate protein, CFP-10) via the formation of copper nanoshell on the gold nanoparticles (AuNPs) surface. The principle of dot-blot immunoassay was based on the reduction of Cu²⁺ ion on the GBP-CFP10G2-AuNPs conjugates, which has gold binding and antigen binding affinities, simultaneously, favouring to appear red dot that can be observed with naked-eye. The dot intensity is proportional to the concentration of tuberculosis antigen CFP-10, which offers a detection limit of 7.6 pg/mL. The analytical performance of GBP-CFP10G2-AuNPs-copper nanoshell dot-blot was superior than that of conventional silver nanoshell. This method was successfully applied to identify the CFP-10 antigen in the clinical urine sample with high sensitivity, specificity, and minimized sample preparation steps. This method exhibits great application potential in the field of nanomedical science for highly reliable point-of-care detection of CFP-10 antigen in real samples to early diagnosis of tuberculosis.

Copper removal from acid mine drainage-polluted water using glutaraldehyde-polyethyleneimine modified diatomaceous earth particles

Mine waters and tailings generated from mining and mineral processing activities often have detrimental impact on the local environment. One example is acid mine drainage, in which sulphides in the mining waste react with water and oxygen to produce an acidic environment that subsequently dissolves host rock minerals from the waste containing toxic metals and trace elements. Copper is one such metal of significance, as it is mined at large volumes in sulphide containing ores. It has strong biocidal activity that greatly affects ecosystems. We have previously reported that glutaraldehyde (GA)-crosslinked polyethyleneimine (PEI) has strong affinity and selectivity for copper and that diatomaceous earth (DE) particles can be modified with the material to form a copper-extraction resin. In this study, the copper uptake of GA-PEI-DE particles was investigated from synthetic and real acid mine drainage samples under different pHs and their copper removal performance was compared with that of selected commercial resins. The results revealed that copper could effectively and preferentially bind to the material at pH 4, and that the copper could be completely eluted by lowering of the pH. In addition, effective copper uptake and elution was demonstrated using real legacy acid mine drainage water from Mount Lyell in Tasmania.

A Highly Sensitive and Selective Colorimetric Hg2+ Ion Probe Using Gold Nanoparticles Functionalized with Polyethyleneimine

A highly sensitive and selective colorimetric assay for the detection of Hg²⁺ ions was developed using gold nanoparticles (AuNPs) conjugated with polyethyleneimine (PEI). The Hg²⁺ ion coordinates with PEI, decreasing the interparticle distance and inducing aggregation. Time-of-flight secondary ion mass spectrometry showed that the Hg²⁺ ion was bound to the nitrogen atoms of the PEI in a bidentate manner (N-Hg²⁺-N), which resulted in a significant color change from light red to violet due to aggregation. Using this PEI-AuNP probe, determination of Hg²⁺ ion can be achieved by the naked eye and spectrophotometric methods. Pronounced color change of the PEI-AuNPs in the presence of Hg²⁺ was optimized at pH 7.0, 50°C, and 300 mM·NaCl concentration. The absorption intensity ratio (A₇₀₀/A₅₁₄) was correlated with the Hg²⁺ concentration in the linear range of 0.003-5.0 μM. The limits of detection were measured to be 1.72, 1.80, 2.00, and 1.95 nM for tap water, pond water, tuna fish, and bovine serum, respectively. Owing to its facile and sensitive nature, this assay method for Hg²⁺ ions can be applied to the analysis of water and biological samples.

Bio-template assisted synthesis of porous glutaraldehyde-polyethyleneimine particulate resin for selective copper ion binding and recovery

Porous ion-exchange resins with features of high selectivity, high capacity, fast adsorption kinetics and chemical stability over a wide pH range are attractive for extracting precious metals like copper and upcycling waste. In this study, porous glutaraldehyde-polyethyleneimine (GA-PEI) particulate resin was synthesised using diatomaceous earth (DE) particles as a bio-template. The crosslinking of PEI by GA was successfully conducted on the surface of DE. Removal of the template DE, merely by chemical etching with potassium hydroxide, resulted in the porous GA-PEI particulate resin. The resin showed excellent selectivity for copper ions in binding and recovery from solutions as complex as real legacy acid mine drainage liquid. The copper ion uptake capacity of the GA-PEI resin was determined to be >8 times greater than non-etched GA-PEI-DE particles. Under the investigated conditions, the GA-PEI resin showed higher selectivity to copper ions from real legacy acid mine drainage liquid compared to the commercial resins Purolite S930 Plus and Lewatit TP 220. Importantly, the absorbed copper ions could be released by simply adjusting pH of the solution to 1. For uptake from acid mine drainage liquid at pH 4 and elution at pH 1, purer copper solutions were achieved with GA-PEI compared to Purolite S930 Plus or Lewatit TP 220 following two cycles of iteration. The results indicate the great potential for using the porous GA-PEI resin in copper extraction under real-world conditions.

Porous ion-exchange resins with features of high selectivity, high capacity, fast adsorption kinetics and chemical stability over a wide pH range are attractive for extracting precious metals like copper and upcycling waste.

Efficient removal of U(vi) from simulated seawater with hyperbranched polyethylenimine (HPEI) covalently modified SiO2 coated magnetic microspheres

Hyperbranched polyethylenimine (HPEI) covalently modified SiO₂ coated magnetic microspheres were prepared for the efficient U(vi) removal from simulated seawater.

Efficient removal of uranium(vi) from simulated seawater with hyperbranched polyethylenimine (HPEI)-functionalized polyacrylonitrile fibers

Readily synthesized PAN–HPEI fibers for efficient removal of U(vi) from simulated seawater.

Unhindered copper uptake by glutaraldehyde-polyethyleneimine coatings in an artificial seawater model system with adsorbed swollen polysaccharides and competing ligand EDTA

Shortly after a surface is submerged in the sea, a conditioning film is generally formed by adsorption of organic molecules, such as polysaccharides. This could affect transport of molecules and ions between the seawater and the surface. An artificial seawater model system was developed to understand how adsorbed polysaccharides impact copper binding by glutaraldehyde-crosslinked polyethyleneimine coatings. Coating performance was also determined when competed against copper-chelating EDTA. Polysaccharide adsorption and copper binding and distribution were investigated using advanced analytical techniques, including depth-resolved time-of-flight secondary ion mass spectroscopy, grazing incidence X-ray absorption near-edge spectroscopy, quartz crystal microbalance with dissipation monitoring and X-ray photoelectron spectroscopy. In artificial seawater, the polysaccharides adsorbed in a swollen state that copper readily penetrated and the glutaraldehyde-polyethyleneimine coatings outcompeted EDTA for copper binding. Furthermore, the depth distribution of copper species was determined with nanometre precision. The results are highly relevant for copper-binding and copper-releasing materials in seawater.

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

A novel tetraethylenepentamine functionalized polymeric adsorbent with polymethacrylate–divinylbenzene as the substrate was facilely prepared for the enhanced removal and selective recovery of Cu(ii) and Ni(ii) from saline solutions.