Rational design of asymmetric red fluorescent probes for live cell imaging with high AIE effects and large two-photon absorption cross sections using tunable terminal groups

Dithiophene chemosensor for ultrasensitive intracellular detection of Al3+: Design, DFT analysis, and ESIPT-PET mechanisms

Metal ions play essential roles in living cells, yet their biological functions, which depend on intracellular concentrations, are not fully understood. Therefore, there is a critical need for efficient and sensitive methods to monitor metal ion levels in biological systems. Herein, we report the development of a fluorescent probe, 2-hydroxy-1-naphthaldehyde-(dithiophen-2-yl)ethanediamine (NS), for the precise and sensitive detection of intracellular Al3+ at concentrations as low as 3.92 × 10-8 M. The probe features a bifunctional thienyl ethanol ligand, consisting of two thiophene rings and a hydroxyl group, which forms stable coordination with Al3+. This interaction modifies the electron allocation within the ligand, suppressing the excited-state intramolecular proton transfer (ESIPT) mechanism and significantly increasing fluorescence intensity. Notably, in the presence of Al3+, compared to other ions, the fluorescence intensity of NS at 452 nm increases by 77-fold, with an exceptional sensitivity and selectivity for Al3+. Furthermore, the hydroxyl group enhances the probe's solubility and stability in aqueous solutions, making it highly effective for intracellular detection of Al3+ in prostate cancer RM-1 cells. The response mechanism is further investigated through 1H NMR and DFT studies, revealing the contributions of ESIPT, photoinduced electron transfer (PET), and CN isomerization to the probe's fluorescence behavior. This work provides a promising and advanced tool for ionobiology, opening new avenues for research into metal ion-related biological processes.

Electrochemical and Optical Properties of D-A-A-A-D Azomethine Triad and Its NIR-Active Polymer

The azomethine TPA-(BTZ)3-TPA with a donor-acceptor-acceptor-acceptor-donor structure has been synthesized and characterized. Azomethine TPA-(BTZ)3-TPA exhibited luminescence properties and a positive solvatochromic effect. Electropolymerization on terminated triphenylamine groups was used to obtain a thin layer of the polyazomethine poly-[TPA-(BTZ)3-TPA]. Further investigation of oxidation/reduction properties of poly-[TPA-(BTZ)3-TPA] via cyclic voltammetry showed that the polymer undergoes two reversible oxidation/reduction processes due to the presence of tetraphenylbenzidine moieties. Electrochromic properties of the polyazomethine poly-[TPA-(BTZ)3-TPA] were investigated via spectroelectrochemistry. It was observed that the polymer in its neutral state is orange, and the color changes to green upon electro-oxidation. The stability of the polymer during multiple oxidation/reduction cycles, response times, and coloration efficiency were also investigated.

Tetraphenylethylene-based AIE nanoprobes for labeling lysosome by two-photon imaging in living cells

Lysosomes are essential cellular organelles, serving vital functions in cellular metabolism and degradation. The design of specifically targeting lysosomes probes with aggregation-induced emission (AIE) characteristics using two-photon excitation techniques is significance and challenging work. Here we designed and synthesized two tetraphenylethylene (TPE)-based AIE fluorescence probes, naming TPE-Ma and TPE-Py, with TPE as the matrix and morpholine (Ma) or pyrrolidone (Py) as the targeting group. These probes exhibit a significant Stokes shift, low cytotoxicity, two-photo fluorescence imaging and lysosome-specific targeting capability ensuring their suitability for fluorescence imaging applications. To enhance the water solubility and cellular accumulation of TPE-Ma and TPE-Py in tumor cells, we employed a biocompatible polymer 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DSPE-mPEG2000) as a nanocarrier. By encapsulating TPE-Ma and TPE-Py within DSPE-mPEG2000, we successfully developed two AIE fluorescent nanoprobes known as DSPE@ TPE-Ma and DSPE@ TPE-Py. The results demonstrated that fluorescent nanoprobes DSPE@ TPE-Ma and DSPE@ TPE-Py possess excellent cell permeability, biocompatibility, superior photostability and specific targeting towards lysosomes in MCF-7 cells. Our findings highlight the potential of these fluorescent nanoprobes as effective tools for two-photon fluorescence imaging and targeted detection of lysosomes in cancer cells.

Engineered Multifunctional Zinc-Organic Framework-Based Aggregation-Induced Emission Nanozyme for Accelerating Spinal Cord Injury Recovery

Functional recovery following a spinal cord injury (SCI) is challenging. Traditional drug therapies focus on the suppression of immune responses; however, strategies for alleviating oxidative stress are lacking. Herein, we developed the zinc-organic framework (Zn@MOF)-based aggregation-induced emission-active nanozymes for accelerating recovery following SCI. A multifunctional Zn@MOF was modified with the aggregation-induced emission-active molecule 2-(4-azidobutyl)-6-(phenyl(4-(1,2,2-triphenylvinyl)phenyl)amino)-1H-phenalene-1,3-dione via a bioorthogonal reaction, and the resulting nanozymes were denoted as Zn@MOF-TPD. These nanozymes gradually released gallic acid and zinc ions (Zn2+) at the SCI site. The released gallic acid, a scavenger of reactive oxygen species (ROS), promoted antioxidation and alleviated inflammation, re-establishing the balance between ROS production and the antioxidant defense system. The released Zn2+ ions inhibited the activity of matrix metalloproteinase 9 (MMP-9) to facilitate the regeneration of neurons via the ROS-mediated NF-κB pathway following secondary SCI. In addition, Zn@MOF-TPD protected neurons and myelin sheaths against trauma, inhibited glial scar formation, and promoted the proliferation and differentiation of neural stem cells, thereby facilitating the repair of neurons and injured spinal cord tissue and promoting functional recovery in rats with contusive SCI. Altogether, this study suggests that Zn@MOF-TPD nanozymes possess a potential for alleviating oxidative stress-mediated pathophysiological damage and promoting motor recovery following SCI.

NIR-II Excitable Water-Dispersible Two-Dimensional Conjugated Polymer Nanoplates for In Vivo Two-Photon Luminescence Bioimaging

While two-dimensional conjugated polymers (2DCPs) have shown great promise in two-photon luminescence (TPL) bioimaging, 2DCP-based TPL imaging agents that can be excited in the second near-infrared window (NIR-II) have rarely been reported so far. Herein, we report two 2DCPs including 2DCP1 and 2DCP2, with octupolar olefin-linked structures for NIR-II-excited bioimaging. The 2DCPs are customized with the fully conjugated donor-acceptor (D-A) linkage and aggregation-induced emission (AIE) active building blocks, leading to good two-photon absorption into the NIR-II window with a 2PACS of ∼64.0 GM per choromophore for both 2DCPs. Moreover, 2DCP1 powders can be exfoliated into water-dispersible nanoplates with a Pluronic F-127 surfactant-assisted temperature-swing method, accompanied by both a drastic reduction of 2PACS throughout the range of 780-1080 nm and a sharp increase of photoluminescence quantum yield to 33.3%. The 2DCP1 nanoplates are subsequently proven to be capable of assisting in visualizing mouse brain vasculatures with a penetration depth of 421 μm and good contrast in vivo, albeit that only 19% of previous 2PACS at 1040 nm is preserved. This work not only provides important insights on how to construct NIR-II excitable 2DCPs for TPL bioimaging but also how to investigate the exfoliation-photophysical property correlation of 2DCPs, which should aid in future research on developing highly efficient TPL bioimaging agents.

Computational Biomaterials: Computational Simulations for Biomedicine

With the flourishing development of material simulation methods (quantum chemistry methods, molecular dynamics, Monte Carlo, phase field, etc.), extensive adoption of computing technologies (high-throughput, artificial intelligence, machine learning, etc.), and the invention of high-performance computing equipment, computational simulation tools have sparked the fundamental mechanism-level explorations to predict the diverse physicochemical properties and biological effects of biomaterials and investigate their enormous application potential for disease prevention, diagnostics, and therapeutics. Herein, the term "computational biomaterials" is proposed and the computational methods currently used to explore the inherent properties of biomaterials, such as optical, magnetic, electronic, and acoustic properties, and the elucidation of corresponding biological behaviors/effects in the biomedical field are summarized/discussed. The theoretical calculation of the physiochemical properties/biological performance of biomaterials applied in disease diagnosis, drug delivery, disease therapeutics, and specific paradigms such as biomimetic biomaterials is discussed. Additionally, the biosafety evaluation applications of theoretical simulations of biomaterials are presented. Finally, the challenges and future prospects of such computational simulations for biomaterials development are clarified. It is anticipated that these simulations would offer various methodologies for facilitating the development and future clinical translations/utilization of versatile biomaterials.

A novel aggregation-induced emission fluorescent probe with large Stokes shift for sensitive detection of pH changes in live cells

The detection of intracellular pH is crucial for elucidating the pathological process of cancers, as well as for medical diagnostic applications. Here, we developed an aggregation-induced emission active pH-responsive fluorescent probe (TPE-DCP) for sensitively detecting cell pH changes. The probe shows obvious pH-sensing properties at ~615 nm, with a pKa value of 6.82 and a good linear pH response ranging from 8.5 to 4.5. TPE-DCP holds advantages such as excellent anti-interference performance, good photostability, and low cytotoxicity, and has been successfully used to image intracellular pH changes in cells.

Combined Skeleton and Spatial Rigidification of AIEgens in 2D Covalent Organic Frameworks for Boosted Fluorescence Emission and Sensing of Antibiotics

AIEgens show relatively weak fluorescence performance owing to the existence of π-π interlayer accumulation, molecular layer planarization, and intramolecular rotation in aggregation-induced emission (AIE) molecules, which limit its application scope. Herein, we put forward a combined skeleton and spatial rigidification method to boost the fluorescence emission efficiency of AIEgens. As a proof-of-concept experiment, two highly fluorescent covalent organic frameworks (COFs) were designed and constructed by the Knoevenagel condensation reaction. The experimental results show that the combined skeleton and spatial rigidification endowed excellent fluorescence emission for the resulting F-COF-2 by destruction of the π-π interlayer accumulation, interference of the molecular layer planarization, and restriction of the intramolecular rotation of the AIEgen unit. F-COF-2 displayed highly sensitive and selective NFT and NZF detection. Particularly, the K_sv value and limit of detection of F-COF-2 toward NFT were estimated to be 9.12 × 10⁵ M^-1 and 3.35 ppb, respectively, which surpassed all the reported crystalline porous fluorescent materials. The mechanism study proved that its outstanding fluorescence detection property was ascribed to the formation of a nonfluorescent complex induced by hydrogen bond interactions and electron transfer between F-COF-2 and NFT and NZF. This work not only proposes a combined skeleton and spatial rigidification strategy to improve the fluorescence efficiency of AIE molecules but also develops a sensor with high fluorescence efficiency, high chemical stability, and highly efficient detection of antibiotics.

Recent advances of aggregation-induced emission materials for fluorescence image-guided surgery

Real-time intraoperative guidance is essential during various surgical treatment of many diseases. Aggregation-induced emission (AIE) materials have shown great potential for guiding surgeons during complex interventions, with the merits of deep tissue penetration, high quantum yield, high molar absorptivity, low background, good targeting ability and excellent photostability. Herein, we provided insights to design efficient AIE materials regarding three key parameters, i.e., deep-tissue penetration ability, high brightness of AIE luminogens (AIEgens), and precise tumor/other pathology nidus targeting strategies, for realizing better application of fluorescence image-guided surgery. Representative interdisciplinary achievements were outlined for the demonstration of this emerging field. Challenges and future opportunities of AIE materials were briefly discussed. The aim of this review is to provide a comprehensive view of AIE materials for intraoperative guidance for researchers and surgeons, and to inspire more further correlational studies in the new frontiers of image-guided surgery.

Two-photon absorption of 28-hetero-2,7-naphthiporphyrins: expanded carbaporphyrinoid macrocycles

The one- and two-photon absorption (1PA and 2PA) properties of three expanded aceneporphyrinoids, 28-thia-, 28-selena- and 28-tellura-2,7-naphthiporphyrin, have been studied. The open-aperture Z-scan technique was used to determine two-photon absorption cross-sections in the near infrared range using an amplified femtosecond laser system. The maximum values of the cross sections were found to be 99, 200 and 650 GM at 900 nm and 1, 13 and 31 GM at 1400 nm for the three investigated compounds, respectively. These results demonstrate enhanced 2PA properties compared with well-known porphyrin photosensitizers, such as Foscan®, showing the potential of porphyrin core modification for optimizing infrared nonlinear absorbers.

Achieving Molecular Fluorescent Conversion from Aggregation-Caused Quenching to Aggregation-Induced Emission by Positional Isomerization

In this work, we synthesized a pair of positional isomers by attaching a small electron-donating pyrrolidinyl group at ortho- and para-positions of a conjugated core. These isomers exhibited totally different fluorescent properties. PDB2 exhibited obvious aggregation-induced emission properties. In contrast, PDB4 showed the traditional aggregation-caused quenching effect. Their different fluorescent properties were investigated by absorption spectroscopy, fluorescence spectroscopy, density functional theory calculations and single-crystal structural analysis. These results indicated that the substituent position of the pyrrolidinyl groups affects the twisted degree of the isomers, which further induces different molecular packing modes, thus resulting in different fluorescent properties of these two isomers. This molecular design concept provided a new accurate strategy for designing new aggregation-induced emission luminogens.

Benchmarking Density Functional Approximations for Excited-State Properties of Fluorescent Dyes

This study presents an extensive analysis of the predictive power of time-dependent density functional theory in determining the excited-state properties of two groups of important fluorescent dyes, difluoroboranes and hydroxyphenylimidazo[1,2-a]pyridine derivatives. To ensure statistically meaningful results, the data set is comprised of 85 molecules manifesting diverse photophysical properties. The vertical excitation energies and dipole moments (in the electronic ground and excited states) of the aforementioned dyes were determined using the RI-CC2 method (reference) and with 18 density functional approximations (DFA). The set encompasses DFAs with varying amounts of exact exchange energy (EEX): from 0% (e.g., SVWN, BLYP), through a medium (e.g., TPSSh, B3LYP), up to a major contribution of EEX (e.g., BMK, MN15). It also includes range-separated hybrids (CAM-B3LYP, LC-BLYP). Similar error profiles of vertical energy were obtained for both dye groups, although the errors related to hydroxyphenylimidazopiridines are significantly larger. Overall, functionals including 40-55% of EEX (SOGGA11-X, BMK, M06-2X) ensure satisfactory agreement with the reference vertical excitation energies obtained using the RI-CC2 method; however, MN15 significantly outperforms them, providing a mean absolute error of merely 0.04 eV together with a very high correlation coefficient (R2 = 0.98). Within the investigated set of functionals, there is no single functional that would equally accurately determine ground- and excited-state dipole moments of difluoroboranes and hydroxyphenylimidazopiridine derivatives. Depending on the chosen set of dyes, the most accurate μGS predictions were delivered by MN15 incorporating a major EEX contribution (difluoroboranes) and by PBE0 containing a minor EEX fraction (hydroxyphenylimidazopiridines). Reverse trends are observed for μES, i.e., for difluoroboranes the best results were obtained with functionals including a minor fraction of EEX, specifically PBE0, while in the case of hydroxyphenylimidazopiridines, much more accurate predictions were provided by functionals incorporating a major EEX contribution (BMK, MN15).

Prospects for More Efficient Multi-Photon Absorption Photosensitizers Exhibiting Both Reactive Oxygen Species Generation and Luminescence

The use of two-photon absorption (TPA) for such applications as microscopy, imaging, and photodynamic therapy (PDT) offers several advantages over the usual one-photon excitation. This creates a need for photosensitizers that exhibit both strong two-photon absorption and the highly efficient generation of reactive oxygen species (ROS), as well as, ideally, bright luminescence. This review focuses on different strategies utilized to improve the TPA properties of various multi-photon absorbing species that have the required photophysical properties. Along with well-known families of photosensitizers, including porphyrins, we also describe other promising organic and organometallic structures and more complex systems involving organic and inorganic nanoparticles. We concentrate on the published studies that provide two-photon absorption cross-section values and the singlet oxygen (or other ROS) and luminescence quantum yields, which are crucial for potential use within PDT and diagnostics. We hope that this review will aid in the design and modification of novel TPA photosensitizers, which can help in exploiting the features of nonlinear absorption processes.

The role of twisting in driving excited-state symmetry breaking and enhanced two-photon absorption in quadrupolar cationic pyridinium derivatives

Two symmetric quadrupolar cationic push-pull compounds with a central electron-acceptor (N+-methylpyrydinium, A+) and different lateral electron-donors, (N,N-dimethylamino and N,N-diphenylamino, D) in a D-π-A+-π-D arrangement, were investigated together with their dipolar counterparts (D-π-A+) for their excited-state dynamics and NLO properties. As for the quadrupolar compounds, attention was focused on excited-state symmetry breaking (ESSB), which leads to a relaxed dipolar excited state. Both electron charge displacements and structural rearrangements were recognized in the excited-state dynamics of these molecules by resorting to femtosecond-resolved broadband fluorescence up-conversion experiments and advanced data analysis, used as a valuable alternative approach for fluorescent molecules compared to time-resolved IR spectroscopy, only suitable for compounds bearing IR markers. Specifically, intramolecular charge transfer (ICT) was found to be guided by ultrafast inertial solvation, while diffusive solvation can drive the twisting of lateral groups to originate twisted-ICT (TICT) states on a picosecond time scale. Yet still, only the bis-N,N-diphenylamino-substituted compound undergoes ESSB, in both highly and sparingly polar solvents, provided that it can experience large amplitude motions to a fully symmetry-broken TICT state. Besides well-known solvation effects, this structural requirement proved to be a necessary condition for these quadrupolar cations to undergo ESSB. In fact, a more efficient uncoupling between the out-of-plane D and A+ groups in the TICT state allows a greater stabilization gained through solvation, relative to the bis-N,N-dimethylamino-substituted derivative, which instead maintains its symmetry. This different behavior parallels the two-photon absorption (TPA) ability, which is greatly enhanced in the case of the bis-N,N-diphenylamino-substituted compound, paving the way for cutting-edge bio-imaging applications.

A lysosomal targeted NIR photosensitizer for photodynamic therapy and two-photon fluorescence imaging

A lysosome-targeting NIR photosensitizer has been developed for two-photon fluorescence imaging and imaging-guided photodynamic therapy via lysosomal-damage-mediated apoptosis.

An ATP responsive fluorescent supramolecular assembly based on a polyelectrolyte and an AIE active tetraphenylethylene derivative

Aggregation induced emission (AIE) active probes have attracted enormous attention due to their wide-spread and ever increasing number of applications in the sensing of chemically and biologically important molecules. AIE probes undergo drastic modulation in their photophysical features from a monomeric to aggregated state. In the current work, we report the aggregation of tetra-anionic Su-TPE (AIE active probe) in the presence of a cationic polyelectrolyte, poly(allylaminehydrochloride) (PAH). A supramolecular assembly is formed by the electrostatic interaction between cationic PAH and anionic Su-TPE molecules, which leads to drastic modulations in the spectral features of anionic Su-TPE upon addition of cationic PAH. The Su-TPE-PAH aggregate assembly has been investigated using various photophysical techniques, such as, ground-state absorption, steady-state and time-resolved emission spectroscopic techniques along with 1H NMR measurements. The Su-TPE-PAH aggregate assembly is found to be responsive towards the ionic strength of the medium and temperature which results in drastic modulations of the spectral features of the emissive supramolecular aggregate assembly. Finally, the specific recognition of an important bioanalyte, ATP, has been achieved using the formed Su-TPE-PAH supramolecular aggregate assembly as a sensing platform which displays good selectivity and high sensitivity towards ATP. Importantly, the developed sensor platform could also function in the human serum matrix, hence, demonstrating the potential of the established sensor platform for real-life applications in near future.

Two Ru(II) compounds with aggregation induced emission as promising photosensitizers for photodynamic therapy

Design and preparation of photosensitizers (PSs) play an important role in photodynamic therapy (PDT). PDT mainly relies on the production of toxic reactive oxygen species (ROS) of the PSs. Conventional fluorophores, however, often suffer from aggregation caused quenching (ACQ), which limits the potential of PSs as fluorescent imaging agents. Molecules with aggregation-induced emission (AIE) properties maintain high fluorescence and dispersity in aqueous solutions, overcoming the ACQ effect. Ruthenium (II)-based AIE compounds are highly biocompatible molecules and can be used for response cell imaging. In the current study, two novel Ru(II)-based AIE compounds with main ligands 1,3-di(2H-tetrazol-5-yl)benzene (Hphbtz) by changing auxiliary ligand 2,2'-bipyridine (bipy) and 1,10-phenanthroline (phen) have been successfully synthesized and characterized, [Ru(Hphbtz)(bipy)₂][PF₆] (1) and [Ru(Hphbtz)(phen)₂][PF₆] (2). The NPs show strong intra-cellular fluorescence and also simultaneously exhibited potent cytotoxic activity. These compounds can self-assemble to form nanoparticles (NPs) by nanoprecipitation. The compounds are found to exhibit a high AIE property with emission maxima at 353 nm and 380 nm, respectively. And the compounds have the low IC₅₀ (half maximal inhibitory concentration) of only 15 μg/mL (1.94 μM) and 13 μg/mL (1.58 μM) on HeLa cells, respectively. Meanwhile, negligible dark toxicity has been also observed for these NPs. The results show that [Ru(Hphbtz)(bipy)₂][PF₆] (1) and [Ru(Hphbtz)(phen)₂][PF₆] (2) NPs can inhibit cell proliferation in vitro, and may be potential candidates for photodynamic therapy.

Boosting type I process of Ru(II) compounds by changing tetrazole ligand for enhanced photodynamic therapy against lung cancer

Boosting the photosensitization type I process will enhance the phototherapy efficacy because the superoxide radicals (O₂^-) generated during type I process are more toxic than the singlet oxygen (¹O₂) in type II process. Herein, [Ru(Hdtza)(phen)₂][PF₆] (1) and [Ru(pytz)(phen)₂][PF₆] (2) (phen = 1,10-phenanthroline) based on two nitrogen-rich tetrazole ligands, di(2H-tetrazol-5-yl) amine (H₂dtza) and 5-(2-pyridyl)tetrazole (Hpytz) have been developed for photodynamic therapy (PDT) against lung cancer, respectively. Nanoprecipitation was used to prepare the nanoparticles (NPs) of both compounds. [Ru(Hdtza)(phen)₂][PF₆] NPs mainly undergo an electron transfer process to generate O₂^- while [Ru(pytz)(phen)₂][PF₆] the direct energy transfer to produce ¹O₂, which is responsible for the higher phototoxicity of [Ru(Hdtza)(phen)₂][PF₆] NPs (IC₅₀ ~ 4.8 μg/mL) than that of [Ru(pytz)(phen)₂][PF₆] NPs (IC₅₀ ~ 13.6 μg/mL) on human lung cancer cells (A549). Furthermore, in vivo study indicates that the tumor proliferation of nude mice can be effectively inhibited with the help of laser when the mice were injected with [Ru(pytz)(phen)₂][PF₆] NPs. This work may provide a simple strategy to design type I photosensitizers for enhanced photodynamic therapy.

Electronic coupling between molybdenum disulfide and gold nanoparticles to enhance the peroxidase activity for the colorimetric immunoassays of hydrogen peroxide and cancer cells

Peroxidase nanoenzymes exhibit a specific affinity toward substrates, thereby demonstrating application potential for realizing the colorimetric immunoassays of hydrogen peroxide (H₂O₂), which can be further used as a probe for imaging cancer cells. To enhance the intrinsic peroxidase activity of molybdenum sulfide (MoS₂) nanomaterials, gold (Au) nanoparticles with an average diameter of approximately 2.1 nm were modified on a MoS₂/carbon surface (denoted as MoS₂/C-Au₆₀₀) via ascorbic acid reduction. MoS₂/C-Au₆₀₀ can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to generate a blue oxidation product in the presence of H₂O₂; this product exhibits peroxidase-like activities, superior to those of most existing MoS₂-based nanoenzymes. Furthermore, MoS₂/C-Au₆₀₀ exhibits a high detection capability for H₂O₂ in the range of 1 × 10^-5 to 2 × 10^-4 mol/L (R² = 0.99), and the lowest detection limit is 1.82 µmol/L in a sodium acetate and acetic acid buffer solution. Steady state kinetics studies indicate that the catalytic mechanism is consistent with the ping-pong mechanism. Given its strong absorption peak at 652 nm in the visible region, MoS₂/C-Au₆₀₀ can be used to image cancer cells due to the enhanced permeability and retention effect. Our findings demonstrate that the synergistic electronic coupling between multiple components can enhance the peroxidase activity, which can facilitate the development of an effective, facile, and reliable method to perform colorimetric immunoassays of H₂O₂ and cancer cells.

Efficient Near-Infrared Photosensitizer with Aggregation-Induced Emission for Imaging-Guided Photodynamic Therapy in Multiple Xenograft Tumor Models

Photodynamic therapy (PDT) strategy has been widely used in tumor treatment, and the reagents for reactive oxygen species (ROS) play a crucial role. Herein, we develop a fluorogen (TTB) containing an electron-accepting benzo[1,2-b:4,5-b']dithiophene 1,1,5,5-tetraoxide core and electron-donating 4,4'-(2,2-diphenylethene-1,1-diyl)bis(N,N-diphenylaniline) groups for image-guided targeting PDT application. TTB exhibits a prominent aggregation-induced emission (AIE) property with strong near-infrared (NIR) fluorescence in aggregates and is capable of efficiently generating ROS of O₂^•- and ¹O₂ under white light irradiation. The nanoparticles (RGD-4R-MPD/TTB NPs) with NIR emission (∼730 nm), high photostability, and low dark cytotoxicity are fabricated by encapsulating TTB within polymeric matrix and then modified with RGD-4R peptide. They show excellent performance in targeting PDT treatment of PC3, HeLa, and SKOV-3 cancer cells in vitro. The investigations on pharmacokinetics, biodistribution, and long-term tracing in vivo reveal that RGD-4R-MPD/TTB NPs can selectively accumulate in tumors for real-time, long-term image-guided PDT treatment. The RGD-4R-MPD/TTB NPs-mediated PDT in multiple xenograft tumor models disclose that the growth of cervical, prostate, and ovarian cancers in mice can be effectively inhibited. These results demonstrate that the reagents employing NIR fluorogen TTB as a photosensitizer could be promising candidates for in vivo image-guided PDT treatments of tumors.

Aqueous stable Pd nanoparticles/covalent organic framework nanocomposite: an efficient nanoenzyme for colorimetric detection and multicolor imaging of cancer cells

Accurate, sensitive detection of cancer cells from clinical fluids is helpful for screening and early diagnosis of tumors. Here, we develop a facile approach for in situ growth of palladium nanoparticles in an aqueous stable carboxymethyl cellulose-modified covalent organic framework hydrogel (named Pd NPs/CMC-COF-LZU1). The resulting nanocomposite has been proven to show superior catalytic performance for the transformation of N-butyl-4-NHAlloc-1,8-naphthalimide (NNPH) into N-butyl-4-amido-1,8-naphthalimide (NPH), indicated by significant changes in both color and fluorescence. Based on these features, the designed nanocomposite was used as a signal transducer to develop a colorimetric assay and multicolor imaging for accurate and sensitive detection of cancer cells. The transformation of NNPH into NPH enabled the detection system to perform multicolor imaging of HeLa cells. By using folic acid (FA) as a recognition element, a total of 100 cancer cells (HeLa) can be distinguished in 1 mL culture medium with 10% FBS. We envision that these COF-based composite materials (Pd NPs/CMC-COF-LZU1) have tremendous potential applications in biotechnology and biological sciences.

Diversified AIE and mechanochromic luminescence based on carbazole derivative decorated dicyanovinyl groups: effects of substitution sites and molecular packing

Two positional isomers exhibited noticeable different luminescence properties, which were mainly attributed to their different molecular packing modes.

Surface modification of graphene oxide via noncovalent functionalization with porphyrins for selective photocatalytic oxidation of alcohols

GO–porphyrin composites were simply prepared by a self-assembly process. The noncovalent interactions between the porphyrins and oxygen-containing functional groups on GO play a crucial role in controlling their photocatalytic activities.

Two-photon AIE luminogen labeled multifunctional polymeric micelles for theranostics

Intelligent polymeric micelles with fluorescence imaging feature have been emerged as promising tools for theranostics. However, conventional fluorescent dyes are limited by short wavelength excitation, interference of tissue autofluorescence, limited imaging depth and quenched emission in aggregation state. Methods: We synthesized a novel mPEG-SS-Poly (AEMA-co-TBIS) (mPEATss) copolymer to develop multifunctional polymeric micelles with great AIE feature for cancer therapy and AIE active two-photon bioimaging. The stimuli-responsive behavior and AIE active two-photon cell and tissue imaging as well as in vitro and in vivo antitumor ability of DOX-loaded mPEATss were studied. Results: mPEATss micelles showed excellent AIE active two-photon cell imaging ability and deep tissue imaging ability. Antitumor drug DOX could be encapsulated to form a drug-loaded micellar system with a small diameter of 65 nm. The disassembly and charge-conversion of mPEATss micelles could be triggered by acidic environment, resulting in accelerated drug release and great antitumor efficacy. In vivo, ex vivo imaging and in vivo pharmacokinetic study demonstrated that mPEATss micelles could efficiently accumulate in tumor sites, which ensured ideal anticancer effect. Conclusions: This pH and redox dual responsive and AIE active two-photon imaging polymeric micelles would be a promising candidate for theranostics.

Heavy atom free 1,1,4,4-tetraphenylbuta-1,3-diene with aggregation induced emission for photodynamic cancer therapy

Common organic molecules usually suffer from aggregation caused quenching (ACQ), which is disadvantageous for imaging guided phototherapy.

Self-reversible mechanochromism and aggregation induced emission in neutral triarylmethanes and their application in water sensing

Neutral triarylmethanes exhibit intramolecular exciplex formation, self-reversible mechanochromism, and aggregation induced/viscosity-dependent emission and sense water in organic solvents.

Photochemical property of a Ru(ii) compound based on 3-(2-pyridyl)pyrazole and 2,2′-bipyridine for ablation of cancer cells

Ru(ii) compounds are potential candidates for photodynamic therapy (PDT).

A pH responsive fluorescent probe based on dye modified i-motif nucleic acids

DNA-AIEgen hybrids show pH-responsive AIE effects induced by the conformational changes of DNA upon pH variation.

Near-Infrared Emissive Discrete Platinum(II) Metallacycles: Synthesis and Application in Ammonia Detection

Two novel discrete organoplatinum(II) metallacycles are prepared by means of coordination-driven self-assembly of a 90° organoplatinum(II) acceptor, cis-(PEt3)2Pt(OTf)2, with two donors, a pyridyl donor, 9,10-di(4-pyridylvinyl)anthracene, and one of two dicarboxylate ligands. Both metallacycles display aggregation-induced emission as well as solvatochromism. More interestingly, both metallacycles exhibit near-infrared fluorescent emission in the solid state and can be used to detect ammonia gas.

AIE Nanoparticles with High Stimulated Emission Depletion Efficiency and Photobleaching Resistance for Long-Term Super-Resolution Bioimaging

Stimulated emission depletion (STED) nanoscopy is a typical super-resolution imaging technique that has become a powerful tool for visualizing intracellular structures on the nanometer scale. Aggregation-induced emission (AIE) luminogens are ideal fluorescent agents for bioimaging. Herein, long-term super-resolution fluorescence imaging of cancer cells, based on STED nanoscopy assisted by AIE nanoparticles (NPs) is realized. 2,3-Bis(4-(phenyl(4-(1,2,2-triphenylvinyl)phenyl)amino)phenyl) fumaronitrile (TTF), a typical AIE luminogen, is doped into colloidal mesoporous silica to form fluorescent NPs. TTF@SiO₂ NPs bear three significant features, which are all essential for STED nanoscopy. First, their STED efficiency can reach more than 60%. Second, they are highly resistant to photobleaching, even under long-term and high-power STED light irradiation. Third, they have a large Stokes' shift of ≈150 nm, which is beneficial for restraining the fluorescence background induced by the STED light irradiation. STED nanoscopy imaging of TTF@SiO₂ -NPs-stained HeLa cells is performed, exhibiting a high lateral spatial resolution of 30 nm. More importantly, long-term (more than half an hour) super-resolution cell imaging is achieved with low fluorescence loss. Considering that AIE luminogens are widely used for organelle targeting, cellular mapping, and tracing, AIE-NPs-based STED nanoscopy holds great potential for many basic biomedical studies that require super-resolution and long-term imaging.

Precise Two-Photon Photodynamic Therapy using an Efficient Photosensitizer with Aggregation-Induced Emission Characteristics

Two-photon photodynamic therapy (PDT) is able to offer precise 3D manipulation of treatment volumes, providing a target level that is unattainable with current therapeutic techniques. The advancement of this technique is greatly hampered by the availability of photosensitizers with large two-photon absorption (TPA) cross section, high reactive-oxygen-species (ROS) generation efficiency, and bright two-photon fluorescence. Here, an effective photosensitizer with aggregation-induced emission (AIE) characteristics is synthesized, characterized, and encapsulated into an amphiphilic block copolymer to form organic dots for two-photon PDT applications. The AIE dots possess large TPA cross section, high ROS generation efficiency, and excellent photostability and biocompatibility, which overcomes the limitations of many conventional two-photon photosensitizers. Outstanding therapeutic performance of the AIE dots in two-photon PDT is demonstrated using in vitro cancer cell ablation and in vivo brain-blood-vessel closure as examples. This shows therapy precision up to 5 µm under two-photon excitation.