Iron carbide nanoparticles: an innovative nanoplatform for biomedical applications

In Vitro Toxicological Insights from the Biomedical Applications of Iron Carbide Nanoparticles in Tumor Theranostics: A Systematic Review and Meta-Analysis

(1) Background: Despite the encouraging indications regarding the suitability (biocompatibility) of iron carbide nanoparticles (ICNPs) in various biomedical applications, the published evidence of their biosafety is dispersed and relatively sparse. The present review synthesizes the existing nanotoxicological data from in vitro studies relevant to the diagnosis and treatment of cancer. (2) Methods: A systematic review was performed in electronic databases (PubMed, Scopus, and Wiley Online Library) on December 2023, searching for toxicity assessments of ICNPs of different sizes, coatings, and surface modifications investigated in immortalized human and murine cell lines. The risk of bias in the studies was assessed using the ToxRTool for in vitro studies. (3) Results: Among the selected studies (n = 22), cell viability emerged as the most frequently assessed cellular-level toxicity endpoint. The results of the meta-analysis showed that cell models treated with ICNPs had a reduced cell viability (SMD = -2.531; 95% CI: -2.959 to -2.109) compared to untreated samples. A subgroup analysis was performed due to the high magnitude of heterogeneity (I2 = 77.1%), revealing that ICNP concentration and conjugated ligands are the factors that largely influence toxicity (p < 0.001). (4) Conclusions: A dose-dependent cytotoxicity of ICNP exposure was observed, regardless of the health status of the cell, tested organism, and NP size. Inconsistent reporting of ICNP physicochemical properties was noted, which hinders comparability among the studies. A comprehensive exploration of the available in vivo studies is required in future research to assess the safety of ICNPs' use in bioimaging and cancer treatment.

Intelligent Size-Switchable Iron Carbide-Based Nanocapsules with Cascade Delivery Capacity for Hyperthermia-Enhanced Deep Tumor Ferroptosis

The ferroptosis pathway is recognized as an essential strategy for tumor treatment. However, killing tumor cells in deep tumor regions with ferroptosis agents is still challenging because of distinct size requirements for intratumoral accumulation and deep tumor penetration. Herein, intelligent nanocapsules with size-switchable capability that responds to acid/hyperthermia stimulation to achieve deep tumor ferroptosis are developed. These nanocapsules are constructed using poly(lactic-co-glycolic) acid and Pluronic F127 as carrier materials, with Au-Fe2 C Janus nanoparticles serving as photothermal and ferroptosis agents, and sorafenib (SRF) as the ferroptosis enhancer. The PFP@Au-Fe2 C-SRF nanocapsules, designed with an appropriate size, exhibit superior intratumoral accumulation compared to free Au-Fe2 C nanoparticles, as evidenced by photoacoustic and magnetic resonance imaging. These nanocapsules can degrade within the acidic tumor microenvironment when subjected to laser irradiation, releasing free Au-Fe2 C nanoparticles. This enables them to penetrate deep into tumor regions and disrupt intracellular redox balance. Under the guidance of imaging, these PFP@Au-Fe2 C-SRF nanocapsules effectively inhibit tumor growth when exposed to laser irradiation, capitalizing on the synergistic photothermal and ferroptosis effects. This study presents an intelligent formulation based on iron carbide for achieving deep tumor ferroptosis through size-switchable cascade delivery, thereby advancing the comprehension of ferroptosis in the context of tumor theranostics.

Synergized photothermal therapy and magnetic field induced hyperthermia via bismuthene for lung cancer combinatorial treatment

Thanks to its intrinsic properties, two-dimensional (2D) bismuth (bismuthene) can serve as a multimodal nanotherapeutic agent for lung cancer acting through multiple mechanisms, including photothermal therapy (PTT), magnetic field-induced hyperthermia (MH), immunogenic cell death (ICD), and ferroptosis. To investigate this possibility, we synthesized bismuthene from the exfoliation of 3D layered bismuth, prepared through a facile method that we developed involving surfactant-assisted chemical reduction, with a specific focus on improving its magnetic properties. The bismuthene nanosheets showed high in vitro and in vivo anti-cancer activity after simultaneous light and magnetic field exposure in lung adenocarcinoma cells. Only when light and magnetic field are applied together, we can achieve the highest anti-cancer activity compared to the single treatment groups. We have further shown that ICD-dependent mechanisms were involved during this combinatorial treatment strategy. Beyond ICD, bismuthene-based PTT and MH also resulted in an increase in ferroptosis mechanisms both in vitro and in vivo, in addition to apoptotic pathways. Finally, hemolysis in human whole blood and a wide variety of assays in human peripheral blood mononuclear cells indicated that the bismuthene nanosheets were biocompatible and did not alter immune function. These results showed that bismuthene has the potential to serve as a biocompatible platform that can arm multiple therapeutic approaches against lung cancer.

Rational Design of Biomaterials to Potentiate Cancer Thermal Therapy

Cancer thermal therapy, also known as hyperthermia therapy, has long been exploited to eradicate mass lesions that are now defined as cancer. With the development of corresponding technologies and equipment, local hyperthermia therapies such as radiofrequency ablation, microwave ablation, and high-intensity focused ultrasound, have has been validated to effectively ablate tumors in modern clinical practice. However, they still face many shortcomings, including nonspecific damages to adjacent normal tissues and incomplete ablation particularly for large tumors, restricting their wide clinical usage. Attributed to their versatile physiochemical properties, biomaterials have been specially designed to potentiate local hyperthermia treatments according to their unique working principles. Meanwhile, biomaterial-based delivery systems are able to bridge hyperthermia therapies with other types of treatment strategies such as chemotherapy, radiotherapy and immunotherapy. Therefore, in this review, we discuss recent progress in the development of functional biomaterials to reinforce local hyperthermia by functioning as thermal sensitizers to endow more efficient tumor-localized thermal ablation and/or as delivery vehicles to synergize with other therapeutic modalities for combined cancer treatments. Thereafter, we provide a critical perspective on the further development of biomaterial-assisted local hyperthermia toward clinical applications.

An Efficient Way to Model Complex Iron Carbides: A Benchmark Study of DFTB2 against DFT

Iron carbides have attracted increasing attention in recent years due to their enormous potential in catalytic fields, such as Fischer-Tropsch synthesis and the growth of carbon nanotubes. Theoretical calculations can provide a more thorough understanding of these reactions at the atomic scale. However, due to the extreme complexity of the active phases and surface structures of iron carbides at the operando conditions, calculations based on density functional theory (DFT) are too costly for realistically large models of iron carbide particles. Therefore, a cheap and efficient quantum mechanical simulation method with accuracy comparable to DFT is desired. In this work, we adopt the spin-polarized self-consistent charge density functional tight-binding (DFTB2) method for iron carbides by reparametrization of the repulsive part of the Fe-C interactions. To assess the performance of the improved parameters, the structural and electronic properties of iron carbide bulks and clusters obtained with DFTB2 method are compared with the previous experimental values and the results obtained with DFT approach. Calculated lattice parameters and density of states are close to DFT predictions. The benchmark results show that the proposed parametrization of Fe-C interactions provides transferable and balanced description of iron carbide systems. Therefore, spin-polarized DFTB2 is valued as an efficient and reliable method for the description of iron carbide systems.

Environmental STEM Study of the Oxidation Mechanism for Iron and Iron Carbide Nanoparticles

The oxidation of solution-synthesized iron (Fe) and iron carbide (Fe₂C) nanoparticles was studied in an environmental scanning transmission electron microscope (ESTEM) at elevated temperatures under oxygen gas. The nanoparticles studied had a native oxide shell present, that formed after synthesis, an ~3 nm iron oxide (Fe_xO_y) shell for the Fe nanoparticles and ~2 nm for the Fe₂C nanoparticles, with small void areas seen in several places between the core and shell for the Fe and an ~0.8 nm space between the core and shell for the Fe₂C. The iron nanoparticles oxidized asymmetrically, with voids on the borders between the Fe core and Fe_xO_y shell increasing in size until the void coalesced, and finally the Fe core disappeared. In comparison, the oxidation of the Fe₂C progressed symmetrically, with the core shrinking in the center and the outer oxide shell growing until the iron carbide had fully disappeared. Small bridges of iron oxide formed during oxidation, indicating that the Fe transitioned to the oxide shell surface across the channels, while leaving the carbon behind in the hollow core. The carbon in the carbide is hypothesized to suppress the formation of larger crystallites of iron oxide during oxidation, and alter the diffusion rates of the Fe and O during the reaction, which explains the lower sensitivity to oxidation of the Fe₂C nanoparticles.

Magnetic Nanoparticles: Synthesis, Anisotropy, and Applications

Anisotropy is an important and widely present characteristic of materials that provides desired direction-dependent properties. In particular, the introduction of anisotropy into magnetic nanoparticles (MNPs) has become an effective method to obtain new characteristics and functions that are critical for many applications. In this review, we first discuss anisotropy-dependent ferromagnetic properties, ranging from intrinsic magnetocrystalline anisotropy to extrinsic shape and surface anisotropy, and their effects on the magnetic properties. We further summarize the syntheses of monodisperse MNPs with the desired control over the NP dimensions, shapes, compositions, and structures. These controlled syntheses of MNPs allow their magnetism to be finely tuned for many applications. We discuss the potential applications of these MNPs in biomedicine, magnetic recording, magnetotransport, permanent magnets, and catalysis.

Commercial Cu2 Cr2 O5 Decorated with Iron Carbide Nanoparticles as a Multifunctional Catalyst for Magnetically Induced Continuous-Flow Hydrogenation of Aromatic Ketones

Copper chromite is decorated with iron carbide nanoparticles, producing a magnetically activatable multifunctional catalytic system. This system (ICNPs@Cu2 Cr2 O5 ) can reduce aromatic ketones to aromatic alcohols when exposed to magnetic induction. Under magnetic excitation, the ICNPs generate locally confined hot spots, selectively activating the Cu2 Cr2 O5 surface while the global temperature remains low (≈80 °C). The catalyst selectively hydrogenates a scope of benzylic and non-benzylic ketones under mild conditions (3 bar H2 , heptane), while ICNPs@Cu2 Cr2 O5 or Cu2 Cr2 O5 are inactive when the same global temperature is adjusted by conventional heating. A flow reactor is presented that allows the use of magnetic induction for continuous-flow hydrogenation at elevated pressure. The excellent catalytic properties of ICNPs@Cu2 Cr2 O5 for the hydrogenation of biomass-derived furfuralacetone are conserved for at least 17 h on stream, demonstrating for the first time the application of a magnetically heated catalyst to a continuously operated hydrogenation reaction in the liquid phase.

Magneto-Electrically Enhanced Intracellular Catalysis of FePt-FeC Heterostructures for Chemodynamic Therapy

Intracellular catalytic reactions can tailor tumor cell plasticity toward high-efficiency treatments, but the application is hindered by the low efficiency of intracellular catalysis. Here, a magneto-electronic approach is developed for efficient intracellular catalysis by inducing eddy currents of FePt-FeC heterostructures in mild alternating magnetic fields (frequency of f = 96 kHz and amplitude of B ≤ 70 mT). Finite element simulation shows a high density of induced charges gathering at the interface of FePt-FeC heterostructure in the alternating magnetic field. As a result, the concentration of an essential coenzyme-β-nicotinamide adenine dinucleotide-in cancer cells is significantly reduced by the enhanced catalytic hydrogenation reaction of FePt-FeC heterostructures under alternating magnetic stimulation, leading to over 80% of senescent cancer cells-a vulnerable phenotype that facilitates further treatment. It is further demonstrated that senescent cancer cells can be efficiently killed by the chemodynamic therapy based on the enhanced Fenton-like reaction. By promoting intracellular catalytic reactions in tumors, this approach may enable precise catalytic tumor treatment.

H2O2-independent chemodynamic therapy initiated from magnetic iron carbide nanoparticle-assisted artemisinin synergy

Chemodynamic therapy (CDT) is a booming technology that utilizes Fenton reagents to kill tumor cells by transforming intracellular H2O2 into reactive oxygen species (ROS), but insufficient endogenous H2O2 makes it difficult to attain satisfactory antitumor results.

Chemically synthesized nanoparticles of iron and iron-carbides

In this paper, we report a one-pot chemical synthesis technique for the preparation of iron and iron-carbide nanoparticles. Mössbauer spectroscopy, X-ray diffraction and magnetometry were used as the main tools to identify the different phases of Fe-C present. The influence of experimental parameters on the structural and compositional properties of nanoparticles was investigated in detail. These particles show ferromagnetic behavior with room temperature coercivity higher than 300 Oe. The X-ray diffraction was complemented by Mössbauer spectroscopy and thermo-magnetic analysis. Remarkably, the carbon content in iron-carbide nanoparticles (carbon rich or carbon poor iron-carbides) can be modulated simply by varying the experimental conditions, like the reaction time, temperature and iron precursor concentration. Magnetic properties can be tailored based upon crystallographic structure and particles composition.

Rapid Millifluidic Synthesis of Stable High Magnetic Moment FexCy Nanoparticles for Hyperthermia

A millifluidic reactor with a 0.76 mm internal diameter was utilized for the synthesis of monodisperse, high magnetic moment, iron carbide (FexCy) nanoparticles by thermal decomposition of iron pentacarbonyl (Fe(CO)5) in 1-octadecene in the presence of oleylamine at 22 min nominal residence time. The effect of reaction conditions (temperature and pressure) on the size, morphology, crystal structure, and magnetic properties of the nanoparticles was investigated. The system developed facilitated the thermal decomposition of precursor at reaction conditions (up to 265 °C and 4 bar) that cannot be easily achieved in conventional batch reactors. The degree of carbidization was enhanced by operating at elevated temperature and pressure. The nanoparticles synthesized in the flow reactor had size 9-18 nm and demonstrated high saturation magnetization (up to 164 emu/gFe). They further showed good stability against oxidation after 2 months of exposure in air, retaining good saturation magnetization values with a change of no more than 10% of the initial value. The heating ability of the nanoparticles in an alternating magnetic field was comparable with other ferrites reported in the literature, having intrinsic loss power values up to 1.52 nHm2 kg-1.

Magnetic Reactive Oxygen Species Nanoreactor for Switchable Magnetic Resonance Imaging Guided Cancer Therapy Based on pH-Sensitive Fe5C2@Fe3O4 Nanoparticles

Reactive oxygen species (ROS) are crucial molecules in cancer therapy. Unfortunately, the therapeutic efficiency of ROS is unsatisfactory in clinic, primarily due to their rigorous production conditions. By taking advantage of the intrinsic acidity and overproduction of H₂O₂ in the tumor environment, we have reported an ROS nanoreactor based on core-shell-structured iron carbide (Fe₅C₂@Fe₃O₄) nanoparticles (NPs) through the catalysis of the Fenton reaction. These NPs are able to release ferrous ions in acidic environments to disproportionate H₂O₂ into ^•OH radicals, which effectively inhibits the proliferation of tumor cells both in vitro and in vivo. The high magnetization of Fe₅C₂@Fe₃O₄ NPs is favorable for both magnetic targeting and T₂-weighted magnetic resonance imaging (MRI). Ionization of these NPs simultaneously decreases the T₂ signal and enhances the T₁ signal in MRI, and this T₂/T₁ switching process provides the visualization of ferrous ions release and ROS generation for the supervision of tumor curing. These Fe₅C₂@Fe₃O₄ NPs show great potential in endogenous environment-excited cancer therapy with high efficiency and tumor specificity and can be guided further by MRI.

Conformation-Dependent Coordination of Carboxylic Acids with Fe3O4 Nanoparticles Studied by ATR-FTIR Spectral Deconvolution

The coordination of valeric acid (VA), glutaric acid (GA), and tricarballylic acid (TA) with Fe-OH on the Fe₃O₄ nanoparticle surface has been systematically studied to elucidate the effects of COOH, molecular configuration, and ligand concentration on the coordination by the combined use of attenuated total reflectance Fourier transform infrared (ATR-FTIR) and thermogravimetric analysis (TGA). The results show that the binding ability of the acids increases with the increase in the COOH number. Multiple conformations coexist for the dicarboxylic and tricarboxylic acid coordinated on the iron oxide NPs. Saturated coordination formed with only a one-, two-, or three-COOH conformation for VA, GA, and TA, respectively, occurs under ligand-scarce conditions, while unsaturated coordination formed with the mixture of uncoordinated, one-, and/or two-COOH conformations for VA, GA, and TA, respectively, exists under ligand-abundant conditions. The maximum coordination numbers for monolayer adsorption for VA, GA, and TA on Fe₃O₄ NPs are 9, 2.4, and 2.7 nm^-2, respectively. This study helps us to understand the fine coordination mechanism caused by the acid molecules with different configurations and elucidates, for the first time, the fine conformational variance incurred by the surrounding ligand with different concentrations and the way in which the ligand is added.

Soft magnetic Fe5C2-Fe3C@C as an electrocatalyst for the hydrogen evolution reaction

Herein, cubic iron carbides encapsulated in an N-doped carbon shell (ICs@NC) were prepared by a simple two-step method. The two-step method included the preparation of iron oxalate dihydrate and the process of calcination with ethylenediamine. By changing the calcination temperature, we could control the type of iron carbide formed. Moreover, the prepared iron carbide@N-doped carbon core-shell particles exhibited regular cubic shapes and soft magnetic properties with high saturation magnetization. More importantly, we investigated the electrocatalytic activity of the iron carbide@N-doped carbon catalysts for the hydrogen evolution reaction (HER). The results show that the Fe5C2-Fe3C@NC catalyst has efficient HER catalytic activity with an overpotential of 209 mV@10 mA cm-2.

Water-Dispersible and Biocompatible Iron Carbide Nanoparticles with High Specific Absorption Rate

Magnetic nanoparticles are important tools for biomedicine, where they serve as versatile multifunctional instruments for a wide range of applications. Among these applications, magnetic hyperthermia is of special interest for the destruction of tumors and triggering of drug delivery. However, many applications of magnetic nanoparticles require high-quality magnetic nanoparticles displaying high specific absorption rates (SARs), which remains a challenge today. We report here the functionalization and stabilization in aqueous media of highly magnetic 15 nm iron carbide nanoparticles featuring excellent heating power through magnetic induction. The challenge of achieving water solubility and colloidal stability was addressed by designing and using specific dopamine-based ligands. The resulting nanoparticles were completely stable for several months in water, phosphate, phosphate-buffered saline, and serum-containing media. Iron carbide nanoparticles displayed high SARs in water and viscous media (water/glycerol mixtures), even after extended exposition to water and oxygen (SAR up to 1000 W·g^-1 in water at 100 kHz, 47 mT). The cytotoxicity and cellular uptake of iron carbide nanoparticles could be easily tuned and were highly dependent on the chemical structure of the ligands used.

To heat or not to heat: a study of the performances of iron carbide nanoparticles in magnetic heating

Heating magnetic nanoparticles with high frequency magnetic fields is a topic of interest for biological applications (magnetic hyperthermia) as well as for heterogeneous catalysis. This study shows why FeC NPs of similar structures and static magnetic properties display radically different heating power (SAR from 0 to 2 kW g-1). By combining results from Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS) and static and time-dependent high-frequency magnetic measurements, we propose a model describing the heating mechanism in FeC nanoparticles. Using, for the first time, time-dependent high-frequency hysteresis loop measurements, it is shown that in the samples displaying the larger heating powers, the hysteresis is strongly time dependent. More precisely, the hysteresis area increases by a factor 10 on a timescale of a few tens of seconds. This effect is directly related to the ability of the nanoparticles to form chains under magnetic excitation, which depends on the presence or not of strong dipolar couplings. These differences are due to different ligand concentrations on the surface of the particles. As a result, this study allows the design of a scalable synthesis of nanomaterials displaying a controllable and reproducible SAR.

Iron Carbide@Carbon Nanocomposites: A Tool Box of Functional Materials

Iron carbide (Fe₃C) is a ceramic magnetic material with high potential for applications in different fields, including catalysis, medicine imaging, coatings, and sensors. Despite its interesting properties, it is still somehow largely unexplored, probably due to challenging synthetic conditions. In this contribution, we present a sol-gel-based method that allows preparing different Fe₃C@C nanocomposites with tailored properties for specific applications, in particular, we have focused on and discussed potential uses for adsorption of noxious gas and waste removal. Nanocomposites were prepared using readily available and "green" sources, such as urea, simple and complex sugars, and chitosan. The nanocomposite prepared from chitosan was found to be more efficient for CO₂ uptake, while the sample synthetized from cellulose had optimal capability for dye absorption and waste oil removal from water.

Iron carbide or iron carbide/cobalt nanoparticles for magnetically-induced CO2 hydrogenation over Ni/SiRAlOx catalysts

Magnetic nanoparticles have been used as heating agents in CO₂ methanation under continuous flow catalyzed by nickel nanoparticles (Ni/SiRAlOx).

Low intensity sonosynthesis of iron carbide@iron oxide core-shell nanoparticles

Here we demonstrate a simple method for the organic sonosynthesis of stable Iron Carbide@Iron Oxide core-shell nanoparticles (ICIONPs) stabilized by oleic acid surface modification. This robust synthesis route is based on the sonochemistry reaction of organometallic precursor like Fe(CO)₅ in octanol using low intensity ultrasonic bath. As obtained, nanoparticles diameter sizes were measured around 6.38 nm ± 1.34 with a hydrodynamic diameter around 25 nm and an estimated polydispersity of 0.27. Core-Shell structure of nanoparticles was confirmed using HR-TEM and XPS characterization tools in which a core made up of iron carbide (Fe₃C) and a shell of magnetite (γ-Fe₂O₃) was found. The overall nanoparticle presented ferromagnetic behavior at 4 K by SQUID. With these characteristics, the ICIONPs can be potentially used in various applications such as theranostic agent due to their properties obtained from the iron oxides and iron carbide phases.

Iron Carbides and Nitrides: Ancient Materials with Novel Prospects

Iron carbides and nitrides have aroused great interest in researchers, due to their excellent magnetic properties, good machinability and the particular catalytic activity. Based on these advantages, iron carbides and nitrides can be applied in various areas such as magnetic materials, biomedical, photo- and electrocatalysis. In contrast to their simple elemental composition, the synthesis of iron carbides and nitrides still has great challenges, particularly at the nanoscale, but it is usually beneficial to improve performance in corresponding applications. In this review, we introduce the investigations about iron carbides and nitrides, concerning their structure, synthesis strategy and various applications from magnetism to the catalysis. Furthermore, the future prospects are also discussed briefly.

MRI relaxivity enhancement of gadolinium oxide nanoshells with a controllable shell thickness

The relaxation enhancement mechanism and MRI application of the designed core–shelled silica–Gd₂O₃ nanoparticle contrast agents were studied.

Monodisperse Au-Fe2C Janus Nanoparticles: An Attractive Multifunctional Material for Triple-Modal Imaging-Guided Tumor Photothermal Therapy

Imaging-guided photothermal therapy (PTT) by combination of imaging and PTT has been emerging as a promising therapeutic method for precision therapy. However, the development of multicomponent nanoplatforms with stable structures for both PTT and multiple-model imaging remains a great challenge. Herein, we synthesized monodisperse Au-Fe₂C Janus nanoparticles (JNPs) of 12 nm, which are multifunctional entities for cancer theranostics. Due to the broad absorption in the near-infrared range, Au-Fe₂C JNPs showed a significant photothermal effect with a 30.2% calculated photothermal transduction efficiency under 808 nm laser irradiation in vitro. Owing to their excellent optical and magnetic properties, Au-Fe₂C JNPs were demonstrated to be advantageous agents for triple-modal magnetic resonance imaging (MRI)/multispectral photoacoustic tomography (MSOT)/computed tomography (CT) both in vitro and in vivo. We found that Au-Fe₂C JNPs conjugated with the affibody (Au-Fe₂C-Z_HER2:342) have more accumulation and deeper penetration in tumor sites than nontargeting JNPs (Au-Fe₂C-PEG) in vivo. Meanwhile, our results verified that Au-Fe₂C-Z_HER2:342 JNPs can selectively target tumor cells with low cytotoxicity and ablate tumor tissues effectively in a mouse model. In summary, monodisperse Au-Fe₂C JNPs, used as a multifunctional nanoplatform, allow the combination of multiple-model imaging techniques and high therapeutic efficacy and have great potential for precision theranostic nanomedicines.