Compact quantum dot-antibody conjugates for FRET immunoassays with subnanomolar detection limits

Atomic/molecular layer deposition of europium-organic thin films on nanoplasmonic structures towards FRET-based applications

We present a novel atomic/molecular layer deposition (ALD/MLD) process for europium-organic thin films based on Eu(thd)3 and 2-hydroxyquinoline-4-carboxylic acid (HQA) precursors. The process yields with appreciably high growth rate luminescent Eu-HQA thin films in which the organic HQA component acts as a sensitizer for the red Eu3+ luminescence, extending the excitation wavelength range up to ca. 400 nm. We moreover deposit these films on nanoplasmonic structures to achieve a twentyfold enhanced emission intensity. Finally, we demonstrate the FRET-type energy transfer process for our Eu-HQA coated nanoplasmonic structures in combination with commercial Alexa647 fluorophor, underlining their potential towards novel bioimaging applications.

Dye-sensitized lanthanide containing nanoparticles for luminescence based applications

Due to their exceptional luminescent properties, lanthanide (Ln) complexes represent a unique palette of probes in the spectroscopic toolkit. Their extremely weak brightness due to forbidden Ln electronic transitions can be overcome by indirect dye-sensitization from the antenna effect brought by organic ligands. Despite the improvement brought by the antenna effect, (bio)analytical applications with discrete Ln complexes as luminescent markers still suffers from low sensitivity as they are limited by the complex brightness. Thus, there is a need to develop nano-objects that cumulate the spectroscopic properties of multiple Ln ions. This review firstly gives a brief introduction of the spectral properties of lanthanides both in complexes and in nanoparticles (NPs). Then, the research progress of the design of Ln-doped inorganic NPs with capping antennas, Ln-complex encapsulated NPs and Ln-complex surface functionalized NPs is presented along with a summary of the various photosensitizing ligands and of the spectroscopic properties (excited-state lifetime, brightness, quantum yield). The review also emphasizes the problems and limitations encountered over the years and the solutions provided to address them. Finally, a comparison of the advantages and drawbacks of the three types of NP is provided as well as a conclusion about the remaining challenges both in the design of brighter NPs and in the luminescence based applications.

Quantum Dot-Antibody Conjugates for Immunofluorescence Studies of Biomolecules and Subcellular Structures

Quantum dots, or nanoscale semiconductors, are one of the most important materials for various research and development purposes. Due to their advantageous photoluminescence and electronic properties, namely, their unique photostability, high brightness, narrow emission spectra from visible to near-infrared wavelengths, convey them significant advantages over widely used fluorochromes, including organic dyes, fluorescent probes. Quantum dots are a unique instrument for a wide range of immunoassays with antibodies. The paper provides an overview of the developed and already applied methods of quantum dot surface modification, quantum dots conjugation to different antibodies (non-covalent, direct covalent linkage or with the use of special adapter molecules), as well as practical examples of recent quantum dot-antibody applications in the immunofluorescence microscopy for cell and cell structure imaging, fluorescent assays for biomolecules detection and in diagnostics of various diseases. The review presents advantages of quantum dot-antibody conjugation technology over the existing methods of immunofluorescence studies and a forward look into its potential prospects in biological and biomedical research.

Multiplexed Biosensing and Bioimaging Using Lanthanide-Based Time-Gated Förster Resonance Energy Transfer

The necessity to scrutinize more and more biological molecules and interactions both in solution and on the cellular level has led to an increasing demand for sensitive and specific multiplexed diagnostic analysis. Photoluminescence (PL) detection is ideally suited for multiplexed biosensing and bioimaging because it is rapid and sensitive and there is an almost unlimited choice of fluorophores that provide a large versatility of photophysical properties, including PL intensities, spectra, and lifetimes.The most frequently used technique to detect multiple parameters from a single sample is spectral (or color) multiplexing with different fluorophores, such as organic dyes, fluorescent proteins, quantum dots, or lanthanide nanoparticles and complexes. In conventional PL biosensing approaches, each fluorophore requires a distinct detection channel and excitation wavelength. This drawback can be overcome by Förster resonance energy transfer (FRET) from lanthanide donors to other fluorophore acceptors. The lanthanides' multiple and spectrally narrow emission bands over a broad spectral range can overlap with several different acceptors at once, thereby allowing FRET from one donor to multiple acceptors. The lanthanides' extremely long PL lifetimes provide two important features. First, time-gated (TG) detection allows for efficient suppression of background fluorescence from the biological environment or directly excited acceptors. Second, temporal multiplexing, for which the PL lifetimes are adjusted by the interaction with the FRET acceptor, can be used to determine specific biomolecules and/or their conformation via distinct PL decays. The high signal-to-background ratios, reproducible and precise ratiometric and homogeneous (washing-free) sensing formats, and higher-order multiplexing capabilities of lanthanide-based TG-FRET have resulted in significant advances in the analysis of biomolecular recognition. Applications range from fundamental analysis of biomolecular interactions and conformations to high-throughput and point-of-care in vitro diagnostics and DNA sequencing to advanced optical encoding, using both liquid and solid samples and in situ, in vitro, and in vivo detection with high sensitivity and selectivity.In this Account, we discuss recent advances in lanthanide-based TG-FRET for the development and application of advanced immunoassays, nucleic acid sensing, and fluorescence imaging. In addition to the different spectral and temporal multiplexing approaches, we highlight the importance of the careful design and combination of different biological, organic, and inorganic molecules and nanomaterials for an adjustable FRET donor-acceptor distance that determines the ultimate performance of the diagnostic assays and conformational sensors in their physiological environment. We conclude by sharing our vision on how progress in the development of new sensing concepts, material combinations, and instrumentation can further advance TG-FRET multiplexing and accelerate its translation into routine clinical practice and the investigation of challenging biological systems.

High-Efficiency FRET Processes in BODIPY-Functionalized Quantum Dot Architectures

Efficient FRET systems are developed combining colloidal CdSe quantum dots (QDs) donors and BODIPY acceptors. To promote effective energy transfer in FRET architectures, the distance between the organic fluorophore and the QDs needs to be optimized by a careful system engineering. In this context, BODIPY dyes bearing amino-terminated functionalities are used in virtue of the high affinity of amine groups in coordinating the QD surface. A preliminary QD surface treatment with a short amine ligand is performed to favor the interaction with the organic fluorophores in solution. The successful coordination of the dye to the QD surface, accomplishing a short donor-acceptor distance, provides effective energy transfer already in solution, with efficiency of 76 %. The efficiency further increases in the solid state where the QDs and the dye are deposited as single coordinated units from solution, with a distance between the fluorophores down to 2.2 nm, demonstrating the effectiveness of the coupling strategy.

Mixed Mercaptocarboxylic Acid Shells Provide Stable Dispersions of InPZnS/ZnSe/ZnS Multishell Quantum Dots in Aqueous Media

Highly luminescent indium phosphide zinc sulfide (InPZnS) quantum dots (QDs), with zinc selenide/zinc sulfide (ZnSe/ZnS) shells, were synthesized. The QDs were modified via a post-synthetic ligand exchange reaction with 3-mercaptopropionic acid (MPA) and 11-mercaptoundecanoic acid (MUA) in different MPA:MUA ratios, making this study the first investigation into the effects of mixed ligand shells on InPZnS QDs. Moreover, this article also describes an optimized method for the correlation of the QD size vs. optical absorption of the QDs. Upon ligand exchange, the QDs can be dispersed in water. Longer ligands (MUA) provide more stable dispersions than short-chain ligands. Thicker ZnSe/ZnS shells provide a better photoluminescence quantum yield (PLQY) and higher emission stability upon ligand exchange. Both the ligand exchange and the optical properties are highly reproducible between different QD batches. Before dialysis, QDs with a ZnS shell thickness of ~4.9 monolayers (ML), stabilized with a mixed MPA:MUA (mixing ratio of 1:10), showed the highest PLQY, at ~45%. After dialysis, QDs with a ZnS shell thickness of ~4.9 ML, stabilized with a mixed MPA:MUA and a ratio of 1:10 and 1:100, showed the highest PLQYs, of ~41%. The dispersions were stable up to 44 days at ambient conditions and in the dark. After 44 days, QDs with a ZnS shell thickness of ~4.9 ML, stabilized with only MUA, showed the highest PLQY, of ~34%.

In Situ Investigation on the Protein Corona Formation of Quantum Dots by Using Fluorescence Resonance Energy Transfer

A fundamental understanding of nanoparticle-protein corona and its interactions with biological systems is essential for future application of engineered nanomaterials. In this work, fluorescence resonance energy transfer (FRET) is employed for studying the protein adsorption behavior of nanoparticles. The adsorption of human serum albumin (HSA) onto the surface of InP@ZnS quantum dots (QDs) with different chirality (d- and l-penicillamine) shows strong discernible differences in the binding behaviors including affinity and adsorption orientation that are obtained upon quantitative analysis of FRET data. Circular dichroism spectroscopy further confirms the differences in the conformational changes of HSA upon interaction with d- and l-chiral QD surfaces. Consequently, the formed protein corona on chiral surfaces may affect their following biological interactions, such as possible protein exchange with serum proteins plasma as well as cellular interactions. These results vividly illustrate the potential of the FRET method as a simple yet versatile platform for quantitatively investigating biological interactions of nanoparticles.

Visualization of Human Induced Pluripotent Stem Cells-Derived Three-Dimensional Cartilage Tissue by Gelatin Nanospheres

Recently, many studies on the three-dimensional (3D) fabrication of cells have been performed. Under these circumstances, it is indispensable to develop the imaging technologies and methodologies for noninvasive visualization of 3D cells fabricated. The objective of this study is to develop the labeling method of human induced pluripotent stem (iPS) cells-derived 3D cartilage tissue with gelatin nanospheres coincorporating three kinds of quantum dots (QD) and iron oxide nanoparticles (IONP) (GNS_QD+IONP). In this study, two labeling methods were performed. One is that a cartilage tissue was labeled directly by incubating with octaarginine (R8)-treated GNS_QD+IONP (direct labeling method). The other one is a "dissociation and labeling method." First, the cartilage tissue was dissociated to cells in a single dispersed state. Then, the cells were incubated with R8-GNS_QD+IONP in a monolayer culture. Finally, the cells labeled were fabricated to 3D pellets or cell sheets. By the direct labeling method, only cells residing in the surrounding site of cartilage tissue were labeled. On the contrary, the 3D cartilage pellets and the cell sheets were homogenously labeled and maintained fluorescently visualized over 4 weeks. In addition, the cartilage properties were histologically detected even after the process of dissociation and labeling. Homogenous labeling and visualization of human iPS cells-derived 3D cartilage tissue was achieved by the dissociation and labeling method with GNS_QD+IONP. Impact statement The homogenous labeling and visualization of human iPS cells-derived three-dimensional (3D) cartilage tissue was achieved over 4 weeks by the dissociation and labeling method with gelatin nanospheres coincorporating quantum dots (QD) and iron oxide nanoparticles (IONP) (GNS_QD+IONP). The cartilage properties of cells treated were maintained. It is concluded that the dissociation and labeling method with GNS_QD+IONP is a promising to visualize the human iPS cells-derived 3D cartilage tissue.

In Vivo Biotransformations of Indium Phosphide Quantum Dots Revealed by X-Ray Microspectroscopy

Many attempts have been made to synthesize cadmium-free quantum dots (QDs), using nontoxic materials, while preserving their unique optical properties. Despite impressive advances, gaps in knowledge of their intracellular fate, persistence, and excretion from the targeted cell or organism still exist, precluding clinical applications. In this study, we used a simple model organism (Hydra vulgaris) presenting a tissue grade of organization to determine the biodistribution of indium phosphide (InP)-based QDs by X-ray fluorescence imaging. By complementing elemental imaging with In L-edge X-ray absorption near edge structure, unique information on in situ chemical speciation was obtained. Unexpectedly, spectral profiles indicated the appearance of In-O species within the first hour post-treatment, suggesting a fast degradation of the InP QD core in vivo, induced mainly by carboxylate groups. Moreover, no significant difference in the behavior of bare core QDs and QDs capped with an inorganic Zn(Se,S) gradient shell was observed. The results paralleled those achieved by treating animals with an equivalent dose of indium salts, confirming the preferred bonding type of In³⁺ ions in Hydra tissues. In conclusion, by focusing on the chemical identity of indium along a 48 h long journey of QDs in Hydra, we describe a fast degradation process, in the absence of evident toxicity. These data pave the way to new paradigms to be considered in the biocompatibility assessment of QD-based biomedical applications, with greater emphasis on the dynamics of in vivo biotransformations, and suggest strategies to drive the design of future applied materials for nanotechnology-based diagnosis and therapeutics.

Influence of the Core/Shell Structure of Indium Phosphide Based Quantum Dots on Their Photostability and Cytotoxicity

With the goal to improve their photostability, InP-based QDs are passivated with three types of inorganic shells, namely (i) a gradient ZnSe_xS_1−x shell, (ii) an additional ZnS shell on top of the gradient shell with two different thicknesses (core/shell/shell, CSS), (iii) an alumina coating on top of ZnS. All three systems have photoluminescence quantum yields (PLQY) > 50% and similar PL decay times (64–67 ns). To assess their photostability they are incorporated into a transparent poly (methyl methacrylate) (PMMA) matrix and exposed to continuous irradiation with simulated sunlight in a climate chamber. The alumina coated core/shell system exhibits the highest stability in terms of PLQY retention as well as the lowest shift of the PL maximum and lowest increase of the PL linewidth, followed by the CSS QDs and finally the gradient shell system. By means of XPS studies we identify the degradation of the ZnS outer layer and concomitant oxidation of the emissive InZnP core as the main origins of degradation in the gradient structure. These modifications do not occur in the case of the alumina-capped sample, which exhibits excellent chemical stability. The gradient shell and CSS systems could be transferred to the aqueous phase using surface ligand exchange with penicillamine. Cytotoxicity studies on human primary keratinocytes revealed that exposure for 24 h to 6.25–100 nM of QDs did not affect cell viability. However, a trend toward reduced cell proliferation is observed for higher concentrations of gradient shell and CSS QDs with a thin ZnS shell, while CSS QDs with a thicker ZnS shell do not exhibit any impact.

In Vivo Biosensing Using Resonance Energy Transfer

Solution-phase and intracellular biosensing has substantially enhanced our understanding of molecular processes foundational to biology and pathology. Optical methods are favored because of the low cost of probes and instrumentation. While chromatographic methods are helpful, fluorescent biosensing further increases sensitivity and can be more effective in complex media. Resonance energy transfer (RET)-based sensors have been developed to use fluorescence, bioluminescence, or chemiluminescence (FRET, BRET, or CRET, respectively) as an energy donor, yielding changes in emission spectra, lifetime, or intensity in response to a molecular or environmental change. These methods hold great promise for expanding our understanding of molecular processes not just in solution and in vitro studies, but also in vivo, generating information about complex activities in a natural, organismal setting. In this review, we focus on dyes, fluorescent proteins, and nanoparticles used as energy transfer-based optical transducers in vivo in mice; there are examples of optical sensing using FRET, BRET, and in this mammalian model system. After a description of the energy transfer mechanisms and their contribution to in vivo imaging, we give a short perspective of RET-based in vivo sensors and the importance of imaging in the infrared for reduced tissue autofluorescence and improved sensitivity.

An Integrated Multilevel Analysis Profiling Biosafety and Toxicity Induced by Indium- and Cadmium-Based Quantum Dots in Vivo

Indium phosphide quantum dots (QDs) have emerged as a new class of fluorescent nanocrystals for manifold applications, from biophotonics to nanomedicine. Recent efforts in improving the photoluminescence quantum yield, the chemical stability and the biocompatibility turned them into a valid alternative to well established Cd-based nanocrystals. In vitro studies provided first evidence for the lower toxicity of In-based QDs. Nonetheless, an urgent need exists for further assessment of the potential toxic effects in vivo. Here we use the freshwater polyp Hydra vulgaris, a well-established model previously adopted to assess the toxicity of CdSe/CdS nanorods and CdTe QDs. A systematic multilevel analysis was carried out in vivo, ex vivo, and in vitro comparing toxicity end points of CdSe- and InP-based QDs, passivated by ZnSe/ZnS shells and surface functionalized with penicillamine. Final results demonstrate that both the chemical composition of the QD core (InP vs CdSe) and the shell play a crucial role for final outcomes. Remarkably, in absence of in vivo alterations, cell and molecular alterations revealed hidden toxicity aspects, highlighting the biosafety of InP-based nanocrystals and outlining the importance of integrated multilevel analyses for proper QDs risk assessment.

Highly sensitive glutathione assay and intracellular imaging with functionalized semiconductor quantum dots

Glutathione (GSH) plays a vital role in biological systems and is associated with human pathology. The engineering of semiconductor quantum dots (QDs) as fluorescent probes for GSH sensing and bioimaging is a potential yet rarely reported approach. Herein, we report the in situ growth of manganese dioxide nanosheets (MnO2) on silica-coated semiconductor quantum dots (QD@SiO2), to prepare a stable and biocompatible fluorescent nanoprobe (QD@SiO2-MnO2) for the selective and sensitive detection of GSH. The modification of QD@SiO2 with MnO2 significantly quenched the fluorescence of CdSe/ZnS QDs, yet the addition of GSH efficiently recovered the fluorescence of the nanoprobe due to the decomposition of MnO2 by GSH. This nanosensor showed a rapid response to GSH with a low detection limit, and high selectivity towards GSH over potential interferences. Furthermore, the MnO2-engineered QDs had good biocompatibility and cellular uptake ability, and were successfully applied for the real-time imaging of intracellular GSH. We envision that semiconductor QD-based probes will stimulate the study of GSH dynamics and facilitate the understanding of GSH-related pathophysiological events.

Sensing with photoluminescent semiconductor quantum dots

Fluorescent sensors benefit from high signal-to-noise and multiple measurement modalities, enabling a multitude of applications and flexibility of design. Semiconductor nanocrystal quantum dots (QDs) are excellent fluorophores for sensors because of their extraordinary optical properties. They have high thermal and photochemical stability compared to organic dyes or fluorescent proteins and are extremely bright due to their large molar cross-sections. In contrast to organic dyes, QD emission profiles are symmetric, with relatively narrow bandwidths. In addition, the size tunability of their emission color, which is a result of quantum confinement, make QDs exceptional emitters with high color purity from the ultra-violet to near infrared wavelength range. The role of QDs in sensors ranges from simple fluorescent tags, as used in immunoassays, to intrinsic sensors that utilize the inherent photophysical response of QDs to fluctuations in temperature, electric field, or ion concentration. In more complex configurations, QDs and biomolecular recognition moieties like antibodies are combined with a third component to modulate the optical signal via energy transfer. QDs can act as donors, acceptors, or both in energy transfer-based sensors using Förster resonance energy transfer (FRET), nanometal surface energy transfer (NSET), or charge or electron transfer. The changes in both spectral response and photoluminescent lifetimes have been successfully harnessed to produce sensitive sensors and multiplexed devices. While technical challenges related to biofunctionalization and the high cost of laboratory-grade fluorimeters have thus far prevented broad implementation of QD-based sensing in clinical or commercial settings, improvements in bioconjugation methods and detection schemes, including using simple consumer devices like cell phone cameras, are lowering the barrier to broad use of more sensitive QD-based devices.

In vivo biodistribution and toxicology studies of cadmium-free indium-based quantum dot nanoparticles in a rat model

Quantum dot (QD) nanoparticles are highly promising contrast agents and probes for biomedical applications owing to their excellent photophysical properties. However, toxicity concerns about commonly used cadmium-based QDs hinder their translation to clinical applications. In this study we describe the in vivo biodistribution and toxicology of indium-based water soluble QDs in rats following intravenous administration. The biodistribution measured at up to 90 days showed that QDs mainly accumulated in the liver and spleen, with similar elimination kinetics to subcutaneous administration. Evidence for QD degradation in the liver was found by comparing photoluminescence measurements versus elemental analysis. No organ damage or histopathological lesions were observed for the QDs treated rats after 24 h, 1 and 4 weeks following intravenous administration at 12.5 mg/kg or 50 mg/kg. Analysis of serum biochemistry and complete blood counts found no toxicity. This work supports the strong potential of indium-based QDs for translation into the clinic.

Synthesis of Reabsorption-Suppressed Type-II/Type-I ZnSe/CdS/ZnS Core/Shell Quantum Dots and Their Application for Immunosorbent Assay

We report a phosphine-free one-pot method to synthesize ZnSe/CdS/ZnS core-shell quantum dots (QDs) with composite type-II/type-I structures and consequent reabsorption suppression properties. The as-synthesized QDs possess high efficient red emission (with quantum yield of 82%) and high optical stability. Compared to type-I QDs, the ZnSe/CdS/ZnS QDs show larger Stokes shift and lower reabsorption which can reduce the emission loss and improve the level of fluorescence output. The ZnSe/CdS/ZnS QDs are used as fluorescent labels to exploit their application in fluorescence-linked immunosorbent assay (FLISA) for the first time in the detection of C-reactive protein (CRP) with a limit of detection (LOD) of 0.85 ng/mL, which is more sensitive than that of CdSe/ZnS type-I QDs based FLISA (1.00 ng/mL). The results indicate that the ZnSe/CdS/ZnS type-II/type-I QDs may be good candidates for applications in biomedical information detection.

A novel type of quantum dot-transferrin conjugate using DNA hybridization mimics intracellular recycling of endogenous transferrin

Colloidal nanoparticles such as Quantum Dots (QDs) are promising alternatives to organic fluorophores, especially for long duration bioimaging. For specific targeting applications, QDs frequently require functionalization with selected proteins. In this regard, conjugation of proteins to QDs such that the nanobioconjugates retain the endogenous behavior of the coupled protein remains challenging. We have developed a novel method to conjugate a protein, transferrin (Tf), to QDs using DNA hybridization. These conjugates are characterized biochemically, and the trafficking properties in live cells are investigated. Although the internalization kinetics into the cells is much reduced compared to Tf labelled with organic dye, we could show that DNA hybridization-based QD-Tf conjugates are the first for which recycling from endosomes to the plasma membrane can be observed. This recycling occurs with kinetics that is similar to dye labelled Tf. We could image and follow the trajectories of recycling of individual vesicles for several tens of minutes. The conjugation of QDs to proteins mediated by DNA hybridization yields a new generation of ultra-bright and photostable probes that preserves the intracellular properties of the dye labelled protein better than previously reported QD conjugates using other surface chemistries for direct coupling.

Nanotechnology-Enhanced No-Wash Biosensors for in Vitro Diagnostics of Cancer

In vitro biosensors have been an integral component for early diagnosis of cancer in the clinic. Among them, no-wash biosensors, which only depend on the simple mixing of the signal generating probes and the sample solution without additional washing and separation steps, have been found to be particularly attractive. The outstanding advantages of facile, convenient, and rapid response of no-wash biosensors are especially suitable for point-of-care testing (POCT). One fast-growing field of no-wash biosensor design involves the usage of nanomaterials as signal amplification carriers or direct signal generating elements. The analytical capacity of no-wash biosensors with respect to sensitivity or limit of detection, specificity, stability, and multiplexing detection capacity is largely improved because of their large surface area, excellent optical, electrical, catalytic, and magnetic properties. This review provides a comprehensive overview of various nanomaterial-enhanced no-wash biosensing technologies and focuses on the analysis of the underlying mechanism of these technologies applied for the early detection of cancer biomarkers ranging from small molecules to proteins, and even whole cancerous cells. Representative examples are selected to demonstrate the proof-of-concept with promising applications for in vitro diagnostics of cancer. Finally, a brief discussion of common unresolved issues and a perspective outlook on the field are provided.

Bridging Lanthanide to Quantum Dot Energy Transfer with a Short-Lifetime Organic Dye

Semiconductor nanocrystals or quantum dots (QDs) should act as excellent Förster resonance energy transfer (FRET) acceptors due to their large absorption cross section, tunable emission, and high quantum yields. Engaging this type of FRET can be complicated due to direct excitation of the QD acceptor along with its longer excited-state lifetime. Many cases of QDs acting as energy transfer acceptors are within time-gated FRET from long-lifetime lanthanides, which allow the QDs to decay before observing FRET. Efficient QD sensitization requires the lanthanide to be in close proximity to the QD. To overcome the lifetime mismatch issues and limited transfer range, we utilized a Cy3 dye to bridge the energy transfer from an extremely long lived terbium emitter to the QD. We demonstrated that short-lifetime dyes can be used as energy transfer relays between extended lifetime components and in this way increased the distance of terbium-QD FRET to ∼14 nm.

Surface plasmon resonance based spectrophotometric determination of medicinally important thiol compounds using unmodified silver nanoparticles

The determination of thiol based biological molecules and drugs, such as cysteine (Cys) (I), α-lipoic acid (II), and sodium 2-sulfanylethane sulphonate (Mesna (III)) in human plasma are becoming progressively more important due to the growing body of knowledge about their essential role in numerous biological pathways. Herein we demonstrate a sensitive colorimetric sensor for the determination of medicinally important thiol drugs based on aggregation of the citrate capped silver nanoparticles (Ag NPs). This approach exploited the high affinity of thiols towards the Ag NPs surface which could tempt replacement of the citrate shell by the thiolate shell of target molecules, resulting in aggregation of the NPs through intermolecular electrostatic interaction or hydrogen-bonding. Because of aggregation, the plasmon band at around 400nm decreases gradually, along with the appearance of a new band connoting a red shift. The calibration curves are derived from the intensity ratios of A₅₃₀/A₄₀₀, which display a linear relation in the range of 1μM-150μM, 5μM-200μM and 10μM-130μM, respectively. The obtained detection limits (3σ) were found to be 1.5μM, 5.6μM and 10.2μM for compound I-III, respectively. The proposed method has been successfully applied for the detection of thiol compounds in real samples.

Ultraefficient Cap-Exchange Protocol To Compact Biofunctional Quantum Dots for Sensitive Ratiometric Biosensing and Cell Imaging

An ultraefficient cap-exchange protocol (UCEP) that can convert hydrophobic quantum dots (QDs) into stable, biocompatible, and aggregation-free water-dispersed ones at a ligand:QD molar ratio (LQMR) as low as 500, some 20-200-fold less than most literature methods, has been developed. The UCEP works conveniently with air-stable lipoic acid (LA)-based ligands by exploiting tris(2-carboxylethyl phosphine)-based rapid in situ reduction. The resulting QDs are compact (hydrodynamic radius, R_h, < 4.5 nm) and bright (retaining > 90% of original fluorescence), resist nonspecific adsorption of proteins, and display good stability in biological buffers even with high salt content (e.g., 2 M NaCl). These advantageous properties make them well suited for cellular imaging and ratiometric biosensing applications. The QDs prepared by UCEP using dihydrolipoic acid (DHLA)-zwitterion ligand can be readily conjugated with octa-histidine (His₈)-tagged antibody mimetic proteins (known as Affimers). These QDs allow rapid, ratiometric detection of the Affimer target protein down to 10 pM via a QD-sensitized Förster resonance energy transfer (FRET) readout signal. Moreover, compact biotinylated QDs can be readily prepared by UCEP in a facile, one-step process. The resulting QDs have been further employed for ratiometric detection of protein, exemplified by neutravidin, down to 5 pM, as well as for fluorescence imaging of target cancer cells.

QD-Biopolymer-TSPP Assembly as Efficient BiFRET Sensor for Ratiometric and Visual Detection of Zinc Ion

In this work, we report a new type of quantum dot (QD)-based fluorescence resonance energy transfer (FRET) assembly and its utility for sensing Zn²⁺ in different media. The assembly on the QD scaffold is via first coating of poly(dA) homopolymer/double-stranded DNA, followed by loading of meso-tetra(4-sulfonatophenyl)porphine dihydrochloride (TSPP), both of which are electrostatic, offering the advantages of cost-efficiency and simplicity. More importantly, the biopolymer coating minimizes the interfacial thickness to be ≤2 nm for QD-TSPP FRET, which results in improvements of up to 60-fold for single FRET efficiency and nearly 4-fold for total FRET efficiency of the QD-biopolymer-TSPP assemblies in comparison with silica-coating-based QD-TSPP assemblies. On the basis of Zn²⁺-chelation-induced spectral modulation, dual-emission QD-poly(dA)-TSPP assemblies are developed as a ratiometric Zn²⁺ sensor with increased sensitivity and specificity. The sensor either in solution or on a paper substrate displays continuous color changes from yellow to bright green toward Zn²⁺, exhibiting excellent visualization capability. By utilizing the competitive displacement of Zn²⁺, the sensor is also demonstrated to have good reversibility. Furthermore, the sensor is successfully used to visualize exogenous Zn²⁺ in living cells. Together the QD-biopolymer-TSPP assembly provides an inexpensive, sensitive, and reliable sensing platform not only for on-site analytical applications but also for high-resolution cellular imaging.

Preparation of gelatin nanospheres incorporating quantum dots and iron oxide nanoparticles for multimodal cell imaging

The objective of this study is to prepare a multimodal probe which can simultaneously visualize cells by optical and magnetic resonance (MR) imaging modalities. Gelatin nanospheres incorporating quantum dots (QD) and iron oxide nanoparticles (IONP) were prepared by the conventional emulsion method. The percentage of QD and IONP incorporated in gelatin nanospheres was changed by the concentrations of gelatin and glutaraldehyde used. However, the apparent size and surface zeta potential were hardly changed. Gelatin nanospheres incorporating QD and IONP were treated with octa-arginine (R8) of a cell-penetrating peptide. When incubated with normal human articular chondrocytes, gelatin nanospheres incorporating QD and IONP were efficiently internalized into the cells although their cytotoxicity was observed at the R8 concentration of 320 μM. The cells internalizing gelatin nanospheres incorporating QD and IONP could be visualized by both the optical and MR imaging modalities. It is concluded that gelatin nanospheres incorporating QD and IONP are promising for the probe of multimodal cell imaging.

Fluorescence Sensing of Circulating Diagnostic Biomarkers Using Molecular Probes and Nanoparticles

The interplay of photonics, nanotechnology, and biochemistry has significantly improved the identification and characterization of multiple types of biomarkers by optical biosensors. Great achievements in fluorescence-based technologies have been realized, for example, by the advancement of multiplexing techniques or the introduction of nanoparticles to biochemical and clinical research. This review presents a concise overview of recent advances in fluorescence sensing techniques for the detection of circulating disease biomarkers. Detection principles of representative approaches, including fluorescence detection using molecular fluorophores, quantum dots, and metallic and silica nanoparticles, are explained and illustrated by pertinent examples from the recent literature. Advanced detection technologies and material development play a major role in modern biosensing and consistently provide significant improvements toward robust, sensitive, and versatile platforms for early detection of circulating diagnostic biomarkers.

Direct conjugation of antibodies to the ZnS shell of quantum dots for FRET immunoassays with low picomolar detection limits

Direct conjugation of IgG, F(ab′)₂, and Fab antibodies to the ZnS shells of penicillamine-coated quantum dots for high-sensitivity FRET biosensing.