Recent developments, advances and strategies in heterogeneous photocatalysts for water splitting

Photocatalytic water splitting (PWS) is an up-and-coming technology for generating sustainable fuel using light energy. Significant progress has been made in the developing of PWS innovations over recent years. In addition to various water-splitting (WS) systems, the focus has primarily been on one- and two-steps-excitation WS systems. These systems utilize singular or composite photocatalysts for WS, which is a simple, feasible, and cost-effective method for efficiently converting prevalent green energy into sustainable H2 energy on a large commercial scale. The proposed principle of charge confinement and transformation should be implemented dynamically by conjugating and stimulating the photocatalytic process while ensuring no unintentional connection at the interface. This study focuses on overall water splitting (OWS) using one/two-steps excitation and various techniques. It also discusses the current advancements in the development of new light-absorbing materials and provides perspectives and approaches for isolating photoinduced charges. This article explores multiple aspects of advancement, encompassing both chemical and physical changes, environmental factors, different photocatalyst types, and distinct parameters affecting PWS. Significant factors for achieving an efficient photocatalytic process under detrimental conditions, (e.g., strong light absorption, and synthesis of structures with a nanometer scale. Future research will focus on developing novel materials, investigating potential synthesis techniques, and improving existing high-energy raw materials. The endeavors aim is to enhance the efficiency of energy conversion, the absorption of radiation, and the coherence of physiochemical processes.

Photocatalytic fuel cell based on integrated silicon nanowire arrays/zinc oxide heterojunction anode for simultaneous wastewater treatment and electricity production

Photocatalytic fuel cells (PFCs) convert organic waste into electricity, thereby providing a potential solution for remediating environmental pollution and solving energy crises. Most PFCs for energy generation applications use powder photocatalysts, which have poor mechanical stability, high internal resistance, and may detach from the substrate during reactions, leading to unstable performance. Integrated photoelectrodes can overcome the drawbacks of powder catalysts. In this study, an integrated photoanode was prepared based on a silicon nanowire arrays/zinc oxide (Si NWs/ZnO) heterojunction by combining metal-assisted chemical etching (MACE) and hydrothermal methods. The resulting photoanode was used to assemble a PFC for simultaneous electricity generation and Rhodamine (RhB) dye wastewater degradation. This PFC showed excellent cell performance under irradiation, with a short-circuit current density of 0.183 Am-2, an open-circuit voltage (OCV) of 0.72 V, and a maximum power density of 0.87 W m-2. It could also be used continuously 20 times while degrading > 90% of RhB. This performance was ascribed to the three-dimensional (3D) structure and large surface area of Si NWs, as well as the matched band structure of ZnO, which facilitated the efficient separation and transport of photogenerated carriers in Si NWs/ZnO. The integrated structure also shortened the carrier transport pathways and suppressed carrier recombination. This research provides a foundation for the development of efficient, stable, low-cost, small-scale PFCs.

Recent Progress of Layered Double Hydroxide-Based Materials in Wastewater Treatment

Layered double hydroxides (LDHs) can be used as catalysts and adsorbents due to their high stability, safety, and reusability. The preparation of modified LDHs mainly includes coprecipitation, hydrothermal, ion exchange, calcination recovery, and sol-gel methods. LDH-based materials have high anion exchange capacity, good thermal stability, and a large specific surface area, which can effectively adsorb and remove heavy metal ions, inorganic anions, organic pollutants, and oil pollutants from wastewater. Additionally, they are heterogeneous catalysts and have excellent catalytic effect in the Fenton system, persulfate-based advanced oxidation processes, and electrocatalytic system. This review ends with a discussion of the challenges and future trends of the application of LDHs in wastewater treatment.

CaTiO3/g-C3N4 heterojunction-based composite photocatalyst: Part I: Experimental design, kinetics, and scavenging agents' effects in photocatalytic degradation of gemifloxacin

A critical, challenging environmental issue is explored pollution of water supplies by discharging industrial/pharmaceutical/hospital/urban wastewaters into the aquatic environment. These needs introducing/developing novel photocatalysts/adsorbents/procedures for removing or mineralizing various pollutants in wastewater before discharging them into marine environments. Further, optimizing conditions to achieve the highest removal efficiency is an important issue. In this study, CaTiO₃/g-C₃N₄ (CTCN) heterostructure was synthesized and characterized by some identification techniques. The simultaneous interaction effects of the experimental variables on the boosted photocatalytic activity of CTCN in the degradation of gemifloxcacin (GMF) were studied in RSM design. The optimal values for four parameters were: catalyst dosage: 0.63 g L^-1, pH: 6.7, C_GMF: 1 mg L^-1, and irradiation time: 27.5 min, with approximately 78.2% of degradation efficiency. The quenching effects of the scavenging agents were studied to show the reactive species' relative importance in GMF photodegradation. The results illustrate that the reactive ^•OH plays a significant role, and the electron plays a minor role in the degradation process. The direct Z-scheme mechanism better described the photodegradation mechanism due to the great oxidative and reductive abilities of prepared composite photocatalysts. This mechanism is an approach to efficiently separating photogenerated charge carriers and improving the CaTiO₃/g-C₃N₄ composite photocatalyst activity. The COD has been performed to study the details of the mineralization of GMF. The pseudo-first-order rat (from the Hinshelwood model) constants of 0.046 min^-1 (t_1/2 = 15.1 min) and 0.048 min^-1 (t_1/2 = 14.4 min) were respectively obtained from the GMF photodegradation data and COD results. The prepared photocatalyst retained its activity after five reusing runs.

Intercalated-Laurate-Enhanced Photocatalytic Activities of Ni/Cr-Layered Double Hydroxides

Laurate (LA−)-intercalated nickel–chromium-layered double hydroxides (LDHs) were synthesized using the co-precipitation method and investigated as a potential photocatalyst for methylene orange (MO) degradation. For comparison, a series of LDHs with various molar ratios of Ni2+(or Mg2+)/Cr3+(or Fe3+)/LA−(or CO32−) were prepared. X−ray diffraction (XRD) and element analysis showed that Ni/Cr(2/1)−1.0 LA LDH had the most ordered crystal structure, and showed the same photocatalytic decolorization performance as Mg/Cr(2/1)−1.0LA LDH towards MO, which was significantly superior to Ni/Cr−CO3 LDH, Ni/Fe(2/1)−1.0LA LDH, and Ni/Cr−CO3 LDH with LA−, and Cr3+ with LA−. The photocatalytic removal rate of MO with the initial concentration of 100 mg/L by Ni/Cr(2/1)−1.0LA LDH (0.5 g/L) could be up to 80% with UV light irradiation for 3 h, which was almost twice higher than that of the sorption test. The photocatalytic reaction was in accordance with the pseudo-first-order kinetics, which implied that the catalytic process took place on the surface of the catalyst. All the results indicate the photodegradation of MO by Ni/Cr−LA LDHs was enhanced by the sorption of MO onto the intercalated LA− in the interlayer. The free radical capture experiments suggest that the main role of the photocatalytic mechanism of Ni/Cr−LA LDHs could be the •O2− with high oxidation activity produced by the electron-hole pairs of LDH, as excited by UV light. Additionally, the •O2− further reacted with the adjacent MO molecule pre-sorbed on the intercalated LA.

Atomically Dispersed Electron Traps in Cu Doped BiOBr Boosting CO2 Reduction to Methanol by Pure H2 O

Overall photocatalytic conversion of CO₂ and pure H₂ O driven by solar irradiation into methanol provides a sustainable approach for extraterrestrial synthesis. However, few photocatalysts exhibit efficient production of CH₃ OH. Here, BiOBr nanosheets supporting atomic Cu catalysts for CO₂ reduction are reported. The investigation of charge dynamics demonstrates a strong built-in electric field established by isolated Cu sites as electron traps to facilitate charge transfer and stabilize charge carriers. As result, the catalysts exhibit a substantially high catalytic performance with methanol productivity of 627.66 µmol g_catal ^-1 h^-1 and selectivity of ≈90% with an apparent quantum efficiency of 12.23%. Mechanism studies reveal that the high selectivity of methanol can be ascribed to energy-favorable hydrogenation of *CO intermediate giving rise to *CHO. The unfavorable adsorption on Cu₁ @BiOBr prevents methanol from being oxidized by photogenerated holes. This work highlights the great potential of single-atom photocatalysts in chemical transformation and energy storage reactions.

A mechanistic study of the photocatalytic activity of AgI–WO3 in an experimentally designed approach toward methylene blue photodegradation

The visible light-active AgI/WO3 binary photocatalyst has been characterized using XRD, FTIR spectroscopy, SEM-EDX, cyclic voltammetry (CV), photoluminescence (PL), and UV–vis DRS techniques.

Synthesis of visible light responsive ZnCoFe layered double hydroxide towards enhanced photocatalytic activity in water treatment

In this study, a ternary layered double hydroxide containing Zn, Co, and Fe transition metals (ZnCoFe LDH) was developed using a co-precipitation procedure. The as-synthesized photocatalyst was evaluated for its performance in the degradation of methylene blue (MB) under visible light irradiation. The effects of various process conditions including photocatalyst dosage, pollutant concentration, pH, lamp distance, and lamp power were investigated. The ZnCoFe LDH achieved approximately 74% photodegradation efficiency owing to the narrow bandgap of 2.14 eV. The Langmuir-Hinselwood rate constants were calculated as 1.17 min^-1 and 3.55 min^-1 for photolysis by LED lamp alone and for photocatalysis by LED/ZnCoFe LDH, respectively. The photocatalytic ability of the LDH was attributed to the generation of radical species like ^•OH and O₂^•-. The photocatalytic degradation intermediates of MB were determined by GC-MS analysis. The catalyst retained its performance throughout seven reuse cycles with only a 4.17% reduction in removal efficiency. The energy per order E_EO of the ZnCoFe/LED process in 180 min treatment time was determined as 5.41 kWh.m^-3. order^-1. This study shows that ZnCoFe LDH has sufficient activity and photostability for long-term application in photocatalytic water treatment.

Engineering Heterostructures of Layered Double Hydroxides and Metal Nanoparticles for Plasmon-Enhanced Catalysis

Artificially designed heterostructures formed by close conjunctions of plasmonic metal nanoparticles (PNPs) and non-plasmonic (2D) lamellar nanostructures are receiving extensive interest. The synergistic interactions of the nanounits induce the manifestation of localized surface plasmon resonance (LSPR) in plasmonic metals in the specific environment of the 2D-light absorbing matrix, impacting their potential in plasmon enhanced catalysis. Specifically, layered double hydroxides (LDH) with the advantages of their unique 2D-layered structure, tuned optical absorption, ease of preparation, composition diversity, and high surface area, have emerged as very promising candidates for obtaining versatile and robust catalysts. In this review, we cover the available PNPs/LDH heterostructures, from the most used noble-metals plasmonic of Au and Ag to the novel non-noble-metals plasmonic of Cu and Ni, mainly focusing on their synthesis strategies toward establishing a synergistic response in the coupled nanounits and relevant applications in plasmonic catalysis. First, the structure–properties relationship in LDH, establishing the desirable features of the 2D-layered matrix facilitating photocatalysis, is shortly described. Then, we address the recent research interests toward fabrication strategies for PNPs/support heterostructures as plasmonic catalysts. Next, we highlight the synthesis strategies for available PNPs/LDH heterostructures, how these are entangled with characteristics that enable the manifestation of the plasmon-induced charge separation effect (PICS), co-catalytic effect, or nanoantenna effect in plasmonic catalysis with applications in energy related and environmental photocatalysis. Finally, some perspectives on the challenges and future directions of PNPs/LDHs heterostructures to improve their performance as plasmonic catalysts are discussed.

A review on functional nanoarchitectonics nanocomposites based on octahedral metal atom clusters (Nb6, Mo6, Ta6, W6, Re6): inorganic 0D and 2D powders and films

This review is dedicated to various functional nanoarchitectonic nanocomposites based on molecular octahedral metal atom clusters (Nb₆, Mo₆, Ta₆, W₆, Re₆). Powder and film nanocomposites with two-dimensional, one-dimensional and zero-dimensional morphologies are presented, as well as film matrices from organic polymers to inorganic layered oxides. The high potential and synergetic effects of these nanocomposites for biotechnology applications, photovoltaic, solar control, catalytic, photonic and sensor applications are demonstrated. This review also provides a basic level of understanding how nanocomposites are characterized and processed using different techniques and methods. The main objective of this review would be to provide guiding significance for the design of new high-performance nanocomposites based on transition metal atom clusters.

Recent Breakthrough in Layered Double Hydroxides and Their Applications in Petroleum, Green Energy, and Environmental Remediation

The fast development of the world civilization is continuously based on huge energy consumption. The extra-consumption of fossil fuel (petroleum, coal, and gas) in past decades has caused several political and environmental crises. Accordingly, the world, and especially the scientific community, should discover alternative energy sources to safe-guard our future from severe climate changes. Hydrogen is the ideal energy carrier, where nanomaterials, like layered double hydroxides (LDHs), play a great role in hydrogen production from clean/renewable sources. Here, we review the applications of LDHs in petroleum for the first time, as well as the recent breakthrough in the synthesis of 1D-LDHs and their applications in water splitting to H2. By 1D-LDHs, it is possible to overcome the drawbacks of commercial TiO2, such as its wide bandgap energy (3.2 eV) and working only in the UV-region. Now, we can use TiO2-modified structures for infrared (IR)-induced water splitting to hydrogen. Extending the performance of TiO2 into the IR-region, which includes 53% of sunlight by 1D-LDHs, guarantees high hydrogen evolution rates during the day and night and in cloudy conditions. This is a breakthrough for global hydrogen production and environmental remediation.

Ultrafast photodegradation of nitenpyram by Ag/Ag3PO4/Zn-Al LDH composites activated by persulfate system: Removal efficiency, degradation pathway and reaction mechanism

In this study, an investigation is conducted into the degradation of nitenpyram (NTP) using highly efficient APMMO/PDS/Vis system. As photocatalysts, silver phosphate (AP) and calcined Zn-Al layered double hydroxides (MMO) exhibit high efficiency in achieving charge separation. Besides, the injection of electrons into peroxydisulfate (PDS) from the APMMO can contribute to obtaining the species in the active state with higher efficiency. Based on the APMMO/PDS/Vis system, 50 mg/L of nitenpyram (NTP, 50 mL) can be completely removed in 60 min using 0.8 g/L photocatalyst and 0.2 g/L PDS under the optimum condition and visible light (780 nm > λ > 420 nm). Meanwhile, as demonstrated under visible light within 30 min, an ultrahigh degradation efficiency can be achieved by NTP based on APMMO1/PDS/Vis system. Besides, the electron paramagnetic resonance (EPR) technique and radical quenching experiments suggested ¹O₂, h⁺, SO₄^-•, •O₂^-, and •OH are all contributory to the removal of pollutants. Given the outcomes achieved by LC/MS system and mass spectrometry, the primary degradation intermediates of NTP end up being converted into photodegradation products (such as 2-Chloropyridine, 6-Chloropurine Riboside and dl-Leucine). Additionally, there are three potential photodegradation pathways to NTP degradation have been deployed. Moreover, the NTP light degradation occurring in APMMO1/PDS/Vis system is competent under the three types of real water sample. Accordingly, the high-efficiency APMMO1/PDS/Vis system is fit for use in water pollution control for agricultural productions.

Recent Progress in the Synthesis and Applications of Composite Photocatalysts: A Critical Review

Photocatalysis is an advanced technique that transforms solar energy into sustainable fuels and oxidizes pollutants via the aid of semiconductor photocatalysts. The main scientific and technological challenges for effective photocatalysis are the stability, robustness, and efficiency of semiconductor photocatalysts. For practical applications, researchers are trying to develop highly efficient and stable photocatalysts. Since the literature is highly scattered, it is urgent to write a critical review that summarizes the state-of-the-art progress in the design of a variety of semiconductor composite photocatalysts for energy and environmental applications. Herein, a comprehensive review is presented that summarizes an overview, history, mechanism, advantages, and challenges of semiconductor photocatalysis. Further, the recent advancements in the design of heterostructure photocatalysts including alloy quantum dots based composites, carbon based composites including carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and graphene, covalent-organic frameworks based composites, metal based composites including metal carbides, metal halide perovskites, metal nitrides, metal oxides, metal phosphides, and metal sulfides, metal-organic frameworks based composites, plasmonic materials based composites and single atom based composites for CO₂ conversion, H₂ evolution, and pollutants oxidation are discussed elaborately. Finally, perspectives for further improvement in the design of composite materials for efficient photocatalysis are provided.

Layered double hydroxides for removing and recovering phosphate: Recent advances and future directions

Eutrophication is a widespread environmental challenge caused by excessive phosphate. Thus, wastewater engineers primarily aim to limit the phosphate concentration in water bodies. Layered double hydroxides (LDHs) are lamellar inorganic materials containing tunable brucite-like structures. This review discusses the fundamental aspects and latest developments in phosphate removal using LDH-based materials. Based on the divalent cations, Ca, Mg, and Zn-containing LDHs are largely used along with trivalent cations such as Al and Fe owing to their limited toxicities. However, classical LDHs are affected by the presence of co-existing anions, have a narrow working pH range, and have moderate adsorption capacities. Binary LDHs have been designed to be selective towards phosphate by the addition of a third metal such as Zr⁴⁺. Developing LDH composites with magnetic, polymeric or carbon materials are feasible approaches for increasing adsorption capacity, stability, and reusability of LDHs. Biochar as a carrier material for LDHs achieved remarkable phosphate adsorption performance and improved LDH dispersion, anion exchange capacity, and ease of separation. The use of recovered phosphate as an SRF, which is a type of bioavailable fertilizer, is a promising approach.

Use of LDH- chromate adsorption co-product as an air purification photocatalyst

This work deals with the use of layered double hydroxides for a double environmental remediation. The residue obtained in the use of these materials as a chromate sorbent in water, was subsequently studied as a photocatalyst for the removal of NO_x gases. With this aim, MgAl-CO₃ layered double hydroxides were synthesized by the coprecipitation method with a divalent/trivalent metal ratio of 3. After its calcination at 500 °C, the mixed oxide was obtained and MgAl-CrO₄ were synthesized by the reconstruction method. A complete chemical, morphological and photochemical study of the samples was carried out with techniques such as XRD, FT-IR, TGA, XRF, PL, DRIFTS and UV-Vis spectroscopy. Results showed that LDH materials presented no significant changes in their structure after their use as a sorbent. Photocatalytic tests of the samples showed a very good NO removal efficiency, as well as a high selectivity (low NO₂ emissions) through complete oxidation of these oxides to nitrate. The incorporation of chromate into the LDH structure improved the absorption of light in the visible region of the spectra, producing an improvement of 20% in the NO elimination compared with the LDH without chromate.

Phosphorylation of arenes, heteroarenes, alkenes, carbonyls and imines by dehydrogenative cross-coupling of P(O)-H and P(R)-H

Organophosphorous compounds have recently emerged as a powerful class of compounds with widespread applications, such as in bioactive natural products, pharmaceuticals, agrochemicals and organic materials, and as ligands in catalysis. The preparation of these compounds requires synthetic techniques with novel catalytic systems varying from transition metal, photo- and electrochemical catalysis to transformations without metal catalysts. Over the past few decades, the addition of P-H bonds to alkenes, alkynes, arenes, heteroarenes and other unsaturated substrates in hydrophosphination and other related reactions via the above-mentioned catalytic processes has emerged as an atom economical approach to obtain organophosphorus compounds. In most of the catalytic cycles, the P-H bond is cleaved to yield a phosphorus-based radical, which adds onto the unsaturated substrate followed by reduction of the corresponding radical yielding the product.

Calcined ZnTi-Layered Double Hydroxide Intercalated with H3 PW12 O40 with Efficiently Photocatalytic and Adsorption Performances

Wastewater treatment is of great significance to environmental remediation. The exploration of efficient and stable methods for wastewater treatment is still a challenging issue. Herein, a heterojunction material with photocatalysis and adsorption properties has been designed to remove the complex pollutants from wastewater. The heterojunction material (ZnO/TiO₂ -PW₁₂ , PW₁₂ =[PW₁₂ O₄₀ ]^3- ) was synthesized by calcining the ZnTi-layered double hydroxide (ZnTi-LDH) intercalated with the Keggin-type polyoxometalate H₃ PW₁₂ O₄₀ . In the construction of ZnO/TiO₂ -PW₁₂ it was found that the polyanionic PW₁₂ remained unchanged in the process of forming the proposed heterojunction. The photochemical properties verify that heterojunction synergistic with PW₁₂ facilitated the separation of photoproduced electron-hole pairs and thus suppressed the recombination. Therefore, ZnO/TiO₂ -PW₁₂ exhibits excellent photocatalytic property, and the efficiency of Cr(VI) photoreduction reached more than 90 % in the first 3 min. Furthermore, the electrostatic force between the PW₁₂ and cationic dyes makes ZnO/TiO₂ -PW₁₂ having an outstanding adsorption performance for cationic dyes, such as rhodamine B, crystal violet and methyl blue. Such heterojunction material combined with polyoxometalate puts forward new insights for the design of functional materials for water treatment with low cost and high efficiency.

Synthesis, Characterization and Photocatalytic Performance of Calcined ZnCr-Layered Double Hydroxides

The development of new materials for performing photocatalytic processes to remove contaminants is an interesting and important research line due to the ever-increasing number of contaminants on our planet. In this sense, we developed a layered double hydroxide material based on Zn and Cr, which was transformed into the corresponding oxide by heat treatment at 500 °C. Both materials were widely characterized for their elemental composition, and structural, morphological, optical and textural properties using several experimental techniques such as x-ray diffraction, x-ray photoelectron spectroscopy, scanning and transmission electron microscopy, Fourier transform infrared spectroscopy, UV-vis spectroscopy and physisorption techniques. In addition, the photocatalytic activity of both materials was analysed. The calcined one showed interesting photocatalytic activity in photodegradation tests using crystal violet dye. The operational parameters for the photocatalytic process using the calcined material were optimised, considering the pH, the initial concentration of the dye, the catalyst load, and the regeneration of the catalyst. The catalyst showed good photocatalytic activity, reaching a degradation of 100% in the optimised conditions and showing good performance after five photodegradation cycles.

Microwave-assisted synthesis of ZnAl-LDH/g-C3N4 composite for degradation of antibiotic ciprofloxacin under visible-light illumination

Ciprofloxacin (CIP) is a fluoroquinolone family antibiotic pollutant. CIP existence in water environment has been rising very fast in day-to-day life and subsequently, it gives enormous health issues for humans because of its potent biological activity. To encounter this, current researchers are focusing on the development of highly efficient visible light semiconductor nanocomposites with potential photocatalytic activity. In the present work, we have successfully synthesized highly efficient zinc-aluminum layered double hydroxides with graphitic carbon nitride (ZALDH/CN) composites via a simple microwave irradiation method first time for the degradation of CIP under visible light. The fabricated materials are subsequently characterized by various spectroscopic techniques. UV-Vis DRS, TRFL, XRD, FT-IR, BET, FE-SEM, TEM, and XPS for optical, crystal structure, morphological, and elemental analysis. The main reactive intermediates which are formed during the photocatalytic degradation process were analyzed by LC-MS analysis. It is worth to note that, the optimized ZALDH/CN-10 composite showed the highest photo-degradation rate constant of 1.22 × 10^-2 min^-1 with 84.10% degradation is higher than bare CN and ZALDH photocatalysts. Based on the electron-hole pair trapping experiment results, possible CIP photo-degradation mechanism was also explained in the present study. With all results, this work demonstrates the ZALDH/CN composite materials showed a high synergistic effect with more specific surface area. Highest specific surface area leads to enhanced visible light adsorption capacity. Subsequently improved number of catalytically active sites. Furthermore, as compared with pure materials, composites of ZALDH/CN are having low electron-hole pair recombination. Consequently, the composites ZALDH/CN showed superior photocatalytic activity for antibiotic pollutant CIP degradation under visible-light illumination.

Application of layered double hydroxide-biochar composites in wastewater treatment: Recent trends, modification strategies, and outlook

In recent years, layered double hydroxide-biochar (LDH-BC) composites as adsorbents and catalysts for contaminants removal (inorganic anions, heavy metals, and organics) have received increasing attention and became a new research point. It is because of the good chemical stability, abundant surface functional groups, excellent anion exchange ability, and good electronic properties of LDH-BC composites. Hence, we offer an overall review on the developments and processes in the synthesis of LDH-BC composites as adsorbents and catalysts. Special attention is devoted to the strategies for enhancing the properties of LDH-BC composites, including (1) magnetic treatment, (2) acid treatment, (3) alkali treatment, (4) controlling metal ion ratios, (5) LDHs intercalation, and (6) calcination. In addition, further studies are called for LDH-BC composites and potential areas for future application of LDH-BC composites are also proposed.

State-of-the-art and prospects of Zn-containing layered double hydroxides (Zn-LDH)-based materials for photocatalytic water remediation

With the rapid worldwide development of industry and human activities, increasing amounts of multifarious contaminants have significantly threatened environmental ecosystems and human health. Solar photocatalytic decontamination, as an environmentally friendly technology, has been regarded as a good approach to eliminate water pollutants. To date, various photocatalysts have been developed for the purpose of water remediation. Zn-containing layered double hydroxides (Zn-LDHs) and their derivatives are promising candidates due to their suitable band edge positions (oxidation-reduction potentials) for high photocatalytic performances, flexible properties derived from adjustable components and tailorable electronic structures, chemical stabilities, and low toxicities. This review focuses on the fabrication and modification of Zn-LDHs and their photocatalytic applications for the elimination of contaminants in water, including the degradation of toxic organic pollutants, transfer of hazardous heavy metals to lower toxicity heavy metals, and bacterial inactivation. The mechanisms involved in the photocatalytic processes are also thoroughly reviewed. Finally, the emerging scientific and engineering opportunities and challenges in environmental photocatalysis are presented. This review provides basic insights into the construction of Zn-LDH-based materials with high photocatalytic activities and new perspectives on their applications for the photocatalytic elimination of contaminants, which is helpful for the development of photocatalysis for environmental remediation from the lab to industry.

M(II)Al4 Type Layered Double Hydroxides-Preparation Using Mechanochemical Route, Structural Characterization and Catalytic Application

The synthesis of the copper-poor and aluminum-rich layered double hydroxides (LDHs) of the CuAl₄ type was optimized in detail in this work, by applying an intense mechanochemical treatment to activate the gibbsite starting reagent. The phase-pure forms of these LDHs were prepared for the first time; using copper nitrate and perchlorate salts during the syntheses turned out to be the key to avoiding the formation of copper hydroxide sideproducts. Based on the use of the optimized syntheses parameters, the preparation of layered triple and multiple hydroxides was also attempted using Ni(II), Co(II), Zn(II) and even Mg(II) ions. These studies let us identify the relative positions of the incorporating cations in the well-known selectivity series as Ni²⁺ >> Cu²⁺ >> Zn²⁺ > Co²⁺ >> Mg²⁺. The solids formed were characterized by using powder X-ray diffractometry, UV–Vis diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. The catalytic potential of the samples was investigated in carbon monoxide oxidation reactions at atmospheric pressure, supported by an in situ diffuse reflectance infrared spectroscopy probe. All solids proved to be active and the combination of the nickel and cobalt incorporation (which resulted in a NiCoAl₈ layered triple hydroxide) brought outstanding benefits regarding low-temperature oxidation and increased carbon monoxide conversion values.

Recent Progress in LDH@Graphene and Analogous Heterostructures for Highly Active and Stable Photocatalytic and Photoelectrochemical Water Splitting

Photocatalytic (PC) and photoelectrochemical (PEC) water splitting is a plethora of green technological process, which transforms copiously available photon energy into valuable chemical energy. With the augmentation of modern civilization, developmental process of novel semiconductor photocatalysts proceeded at a sweltering rate, but the overall energy conversion efficiency of semiconductor photocatalysts in PC/PEC is moderately poor owing to the instability ariseing from the photocorrosion and messy charge configuration. Particularly, layered double hydroxides (LDHs) as reassuring multifunctional photocatalysts, turned out to be intensively investigated owing to the lamellar structure and exceptional physico-chemical properties. However, major drawbacks of LDHs material are its low conductivity, sluggish mass transfer and structural instability in acidic media, which hinder their applicability and stability. To surmount these obstacles, the formation of LDH@graphene and analogus heterostructures could proficiently amalgamate multi-functionalities, compensate distinct shortcomings, and endow novel properties, which ensure effective charge separation to result in stability and superior catalytic activities. Herein, we aim to summarize the currently updated synthetic strategies used to design heterostructures of 2D LDHs with 2D/3D graphene and graphene analogus material as graphitic carbon nitride (g-C₃ N₄ ), and MoS₂ as mediator, or interlayer support, or co-catalyst or vice versa for superior PC/PEC water splitting activities along with long-term stabilities. Furthermore, latest characterization technique measuring the stability along with variant interface mode for imparting charge separation in LDH@graphene and graphene analogus heterostructure has been identified in this field of research with understanding the intrinsic structural features and activities.

In Situ Growth of ZnIn2S4 on MOF-Derived Ni-Fe LDH to Construct Ternary-Shelled Nanotubes for Efficient Photocatalytic Hydrogen Evolution

A rational design of a novel ternary-shelled nanotube is attractive in photocatalytic water splitting. Herein, ZnIn₂S₄ nanosheets were in situ grown on the surface of MIL-88A-derived Ni-Fe layered double hydroxide (LDH) to fabricate ternary-shelled nanotubes (ZIS@Ni-Fe LDH) via a self-assembly strategy. Characterization indicates that the ZIS@Ni-Fe LDH heterostructure exhibits a high surface area and a well-defined ternary-shelled hollow structure. The optimal heterostructure presents a remarkably improved photocatalytic hydrogen production rate (2035.81 μmol g^-1 h^-1) compared with bare ZnIn₂S₄ and MIL-88A-derived Ni-Fe LDH under visible light illumination. The effect of ZnIn₂S₄ loading on the photocatalytic performance and stability of ZIS@Ni-Fe LDH is systematically studied. The ZIS@Ni-Fe LDH heterostructure can make better use of the inner space, provide abundant reactive sites, improve light harvesting, accelerate interfacial electron transfer, and further promote photocatalytic hydrogen evolution. Based on the electrocatalytic performance, the probable photocatalytic mechanism and the electron transfer pathway can be proposed. Our work provides a facile and efficient strategy to construct ternary-shelled heterojunction photocatalysts.

Heterogeneous Interface Design to Enhance the Photocatalytic Performance

Heterojunction photocatalysts, which can relieve the low carrier separation efficiency and insufficient light absorption ability of one catalyst, have received extensive attention. To construct an ideal heterojunction for photocatalysis, most previous studies focused on energy band structure engineering to prolong charge carrier lifetime and increase the reaction rates, which are critical to increase the photocatalytic activity. Here, the heterojunction interface was surprisingly found to be another important factor to affect the photocatalytic performance. We design three heterojunction interface models of α-Fe₂O₃/Bi₂O₃, corresponding to "ring-to-face", "face-to-face", and "rod-to-face". By tuning the heterogeneous interfaces, the photocatalytic performance of composites was significantly improved. On the basis of the type I energy band structures, the optimized face-to-face model realized a photocatalytic efficiency of 90.8% that of pure α-Fe₂O₃ (<30%) for degradation of methylene blue and a higher efficiency (80%) for degrading tetracycline within 60 min, which were superior to most Fe/Bi/O-based photocatalytic heterojunctions. Furthermore, the results disclosed that the enhanced performance was owing to the sufficient interfacial contact and low interfacial resistance of the face-to-face model, which provided sufficient channels for efficient charge transfer. This work offers a new direction of tuning heterojunction interface for designing composite photocatalysts.

Morphological and Thermal Properties of Poly(Vinyl Alcohol)/Layered Double Hydroxide Hybrid Nanocomposite Fibers

Nanolayered particulate of Zn-based layered double hydroxide (LDH) was prepared by a low temperature greener sol-gel method. X-ray diffraction (XRD) studies were performed on the particles annealed at different temperatures. Hexagonal crystal structure of the as-grown LDH particulates was observed. The crystal structure was modified to tetragonal structure of layered double oxide (LDO) on annealing at 250°C. Rietveld fittings showed a collapse of interlayer separation distance along the preferred orientation of the LDH particles as a result of heat treatment. Further, LDH particles were used as fillers of electrospun poly(vinyl alcohol) (PVA) fibers. Heat treatment of the polymer fibers was also performed at different temperatures, and thermal changes were studied by thermogravimetric analysis (TGA), Raman spectroscopy, and scanning electron microscopy (SEM) techniques. Improved interaction of fibers with LDH nanoparticles was observed and ascribed to LDH-related LDO phase transformation at higher temperature. Thermal mechanisms of the rapid weight loss in filled fibers were discussed in comparison to the pure PVA fiber losses. Experimental Raman frequencies of the composite fibers were compared with the calculated Raman modes of the enol and ZnO monomers. The molecular vibration frequencies were found to differ significantly due to heat treatment. Finally, the role filler in the faster and greener thermal decomposition of polymeric fibers was also discussed in the present work.

A Comparative Study on Cure Kinetics of Layered Double Hydroxide (LDH)/Epoxy Nanocomposites

Layered double hydroxide (LDH) minerals are promising candidates for developing polymer nanocomposites and the exchange of intercalating anions and metal ions in the LDH structure considerably affects their ultimate properties. Despite the fact that the synthesis of various kinds of LDHs has been the subject of numerous studies, the cure kinetics of LDH-based thermoset polymer composites has rarely been investigated. Herein, binary and ternary structures, including [Mg0.75 Al0.25 (OH)2]0.25+ [(CO32−)0.25/2∙m H2O]0.25−, [Mg0.75 Al0.25 (OH)2]0.25+ [(NO3−)0.25∙m H2O]0.25− and [Mg0.64 Zn0.11 Al0.25 (OH)2]0.25+ [(CO32−)0.25/2∙m H2O]0.25−, have been incorporated into epoxy to study the cure kinetics of the resulting nanocomposites by differential scanning calorimetry (DSC). Both integral and differential isoconversional methods serve to study the non-isothermal curing reactions of epoxy nanocomposites. The effects of carbonate and nitrate ions as intercalating agents on the cure kinetics are also discussed. The activation energy of cure (Eα) was calculated based on the Friedman and Kissinger–Akahira–Sunose (KAS) methods for epoxy/LDH nanocomposites. The order of autocatalytic reaction (m) for the epoxy/Mg-Al-NO3 (0.30 and 0.254 calculated by the Friedman and KAS methods, respectively) was smaller than that of the neat epoxy, which suggested a shift of the curing mechanism from an autocatalytic to noncatalytic reaction. Moreover, a higher frequency factor for the aforementioned nanocomposite suggests that the incorporation of Mg-Al-NO3 in the epoxy composite improved the curability of the epoxy. The results elucidate that the intercalating anions and the metal constituent of LDH significantly govern the cure kinetics of epoxy by the participation of nitrate anions in the epoxide ring-opening reaction.

AgCl-ZnAl Layered Double Hydroxides as Catalysts with Enhanced Photodegradation and Antibacterial Activities

Surface-modified ZnAl layered double hydroxides (LDHs) were prepared by reaction of AgNO3, with both ZnAlCl (LDH1) and ZnAlCO3 exchanged on the surface with chloride anions (LDH3). In this way, AgCl nanoparticles with crystalline domains ranging from 40 to 100 nm were grown on the LDH surface. An additional sample was prepared by partial reduction of silver to obtain Ag@AgCl-LDH (LDH2). The composites were tested as catalysts in Rhodamine B (RhB) degradation, wherein LDH2 showed complete cleavage of RhB after 45 min of irradiation versus 70 min needed in the presence of AgCl. This time decreased to 35 min for LDH1 and 15 min for LDH3, underlining the role of the AgCl dimensions and anion in the interlayer region. Studies on the reactive species involved in the degradation process revealed that, for all catalysts, O2·− was the main active species, while, to some extent, holes contribute to the activity of the LDH3. Finally, the composites showed high bactericidal activity, under irradiation, against Escherichia coli, comparable with that of Gentamicin, the positive control. A synergic effect of silver released from the composites and the production of reactive oxygen species was considered.

Layered double hydroxide/sepiolite hybrid nanoarchitectures for the controlled release of herbicides

In this work, organic-inorganic hybrid nanoarchitectures were prepared in a single coprecipitation step by assembling magnesium-aluminum layered double hydroxides (MgAl-LDH) and a sepiolite fibrous clay, with the simultaneous encapsulation of the herbicide 2-methyl-4-chlorophenoxyacetic acid (MCPA) as the MgAl-LDH retains its ion exchange properties. The synthetic procedure was advantageous in comparison to the incorporation of MCPA by ion exchange after the formation of the LDH/sepiolite nanoarchitecture in a previous step, as it was less time consuming and gave rise to a higher loading of MCPA. The resulting MCPA-LDH/sepiolite nanoarchitectures were characterized by various physicochemical techniques (XRD, FTIR and ²⁹Si NMR spectroscopies, CHN analysis and SEM) that revealed interactions of LDH with the sepiolite fibers through the silanol groups present on the outer surface of sepiolite, together with the intercalation of MCPA in the LDH confirmed by the increase in the basal spacing from 0.77 nm for the pristine LDH to 2.32 nm for the prepared materials. The amount of herbicide incorporated in the hybrid nanoarchitectures prepared by the single-step coprecipitation method surpassed the CEC of LDH (ca. 330 mEq/100 g), with values reaching 445 mEq/100 g LDH for certain compositions. This suggests a synergy between the inorganic solids that allows the nanoarchitecture to exhibit better adsorption properties than the separate components. Additionally, in the release assays, the herbicide incorporated in the hybrid nanoarchitectures could be completely released, which confirms its suitability for agricultural applications. In order to achieve a more controlled release of the herbicide and to act for several days on the surface of the soil, the hybrid nanoarchitectures were encapsulated in a biopolymer matrix of alginate/zein and shaped into spheres. In in vitro tests carried out in bidistilled water, a continuous release of MCPA from the bionanocomposite beads was achieved for more than a week, while the non-encapsulated materials released the 100% of MCPA in 48 h. Besides, the encapsulation may allow for better handling and transport of the herbicide.

Ag₂CO₃ Decorating BiOCOOH Microspheres with Enhanced Full-Spectrum Photocatalytic Activity for the Degradation of Toxic Pollutants

The development of excellent full-spectrum photocatalysts is of vital significance to its practical application in environmental remediation. Herein, flower-like Ag₂CO₃/BiOCOOH type I heterostructures were prepared via a facile method and exhibited powerful photocatalytic activity by removing various toxic pollutants (rhodamine B, methyl blue, and tetracycline hydrochloride) under simulated sunlight irradiation. The boosted photocatalytic performance is attributed to the expanded range of the absorption spectrum and alleviated separation rate of the photo-induced electrons and holes. The photoluminescence spectra and trapping experiment were applied to clarify the photocatalytic reaction mechanism of Ag₂CO₃/BiOCOOH. The holes and •O₂⁻ were detected as the dominant reactive species involved in pollutant degradation. This work provides a novel full-spectrum-driven photocatalyst of Ag₂CO₃/BiOCOOH, which could effectively degrade toxic pollutants under simulated sunlight.

Synthesis of Flower-Like AgI/BiOCOOH p-n Heterojunctions With Enhanced Visible-Light Photocatalytic Performance for the Removal of Toxic Pollutants

In this study, flower-like AgI/BiOCOOH heterojunctions were constructed through a two-step procedure involving the solvothermal synthesis of BiOCOOH microflowers followed by AgI modification using a precipitation method. These novel photocatalysts were systematically examined by XRD, UV–vis DRS, SEM, TEM, EDS, and PL spectroscopy techniques. The AgI/BiOCOOH heterojunction were studied as a decent photocatalyst for the removal of the industrial dye (rhodamine B, and methyl blue) and antibiotic (tetracycline) under visible light. The AgI/BiOCOOH heterojunctions are much more active than bare BiOCOOH, and AgI, which could be ascribed to the improved separation of charge carriers, resulting from the formation of p-n heterojunction between two constituents. The holes (h⁺) and superoxide radical (•O2-) were detected as the main active species responsible for the pollutant degradation. The results showed that a highly efficient visible-light-driven photocatalytic system was developed for the decomposition of toxic pollutants.

Unique physicochemical properties of two-dimensional light absorbers facilitating photocatalysis

The emergence of two-dimensional (2D) materials with a large lateral size and extremely small thickness has significantly changed the development of many research areas by producing a variety of unusual physicochemical properties.