Biodegradable toughened nanohybrid shape memory polymer for smart biomedical applications

Unusual photo-tunable mechanical transformation of azobenzene terminated aliphatic polycarbonate

Human substance needsśś have been enriched by the development of smart-responsive materials possessing unique responsiveness and mechanical variability. However, acquiring these features in photoresponsive energy-driven elastomers is challengeable but highly desirable. Here, we report fabrication of physically-crosslinked elastomers based on an aliphatic polycarbonate terminated with one azobenzene derivative as the end group. Upon irradiation of UV light, the aliphatic polycarbonate shows unusual mechanical transformation from trans-azobenzene-rich elasticity to cis-azobenzene-rich plasticity, which is contrary to the photo-triggered mechanics of other azopolymers. This indicates that stronger interaction may be established between the terminated cis-azobenzenes and the benzene rings in the side chain of polymer, leading to a higher crosslinking density appeared in the cis-azobenzene-rich sample. This azobenzene-terminated polymer is an energy-driven elastomer, which has photo-switchable supramolecular interactions, showing photo-tunable mechanical properties (the half-life period of the cis-azobenzene is 16.9 h). More interestingly, the photoinduced mechanical change occurs at room temperature, enabling the aliphatic polycarbonate to behave as non-thermally switchable ultra-strong adhesive for different substrates, which is specifically suitable for smart dressings to promote wound healing. This switchable mechanical feature of elastomers may be a reference for smart elastomers towards advanced applications.

Synthesis and characterization of macrodiols and non-segmented poly(ester-urethanes) (PEUs) derived from α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH): effect of initiator, degree of polymerization, and diisocyanate

Nine different macrodiols derived from α,ω-hydroxy telechelic poly(ε-caprolactone) (HOPCLOH) were prepared by ring-opening polymerization of ε-caprolactone (CL) using three linear aliphatic diols (HO-(CH2) n -OH, where n = 4, 8, and 12) as initiators and catalyzed by ammonium decamolybdate (NH4)8[Mo10O34]. The crystallization temperature (T c) and crystallinity (x i) were relatively high for HOPCLOH species with a long aliphatic chain [-(CH2)12-] in the oligoester. Also, HOPCLOH was the precursor of twenty-seven different poly(ester-urethanes) (PEUs) with various degrees of polymerization (DP) of HOPCLOH and three types of diisocyanates such as 1,6-hexamethylene diisocyanate (HDI), methylene diphenyl diisocyanate (MDI), and 4,4'-methylenebis (cyclohexyl isocyanate) (HMDI). HOPCLOH exhibited the melting temperature (T m) and crystallinity (x i) with a proportional dependency to the degree of polymerization (DP). PEUs showed significant thermal and mechanical properties, which had a direct correlation in terms of the type of DP and diisocyanate. PEUs derived from HDI versus MDI or HMDI exhibited an apparent effect where aliphatic diisocyanate (HDI) induced a significant x i with respect to aromatic and cyclic diisocyanate (MDI or HMDI). The profile of PEUs films according to mechanical properties is mainly a plastic behavior. The chemical nature and properties of HOPCLOH and PEUs were characterized by NMR, FT-IR, GPC, MALDI-TOF, DSC, and mechanical properties.

Modular photoorigami-based 4D manufacturing of vascular junction elements

Four-dimensional (4D) printing, combining three-dimensional (3D) printing with time-dependent stimuli-responsive shape transformation, eliminates the limitations of the conventional 3D printing technique for the fabrication of complex hollow constructs. However, existing 4D printing techniques have limitations in terms of the shapes that can be created using a single shape-changing object. In this paper, we report an advanced 4D fabrication approach for vascular junctions, particularly T-junctions, using the 4D printing technique based on coordinated sequential folding of two or more specially designed shape-changing elements. In our approach, the T-junction is split into two components, and each component is 4D printed using different synthesized shape memory polyurethanes and their nanohybrids, which have been synthesized with varying hard segment contents and by incorporating different weight percentages of photo-responsive copper sulfide-polyvinyl pyrrolidone nanoparticles. The formation of a T-junction is demonstrated by assigning different shape memory behaviors to each component of the T-junction. A cell culture study with human umbilical vein endothelial cells reveals that the cells proliferate over time, and almost 90% of cells remain viable on day 7. Finally, the formation of the T-junction in the presence of near-infrared light has been demonstrated after seeding the endothelial cells on the programmed flat surface of the two components and fluorescence microscopy at day 3 and 7 reveals that the cells adhered well and continue to proliferate over time. Hence, the proposed alternative approach has huge potential and can be used to fabricate vascular junctions in the future.

3D-Printed Shape Memory Poly(alkylene terephthalate) Scaffolds as Cardiovascular Stents Revealing Enhanced Endothelialization

Cardiovascular diseases are the leading cause of death and current treatments such as stents still suffer from disadvantages. Balloon expansion causes damage to the arterial wall and limited and delayed endothelialization gives rise to restenosis and thrombosis. New more performing materials that circumvent these disadvantages are required to improve the success rate of interventions. To this end, the use of a novel polymer, poly(hexamethylene terephthalate), is investigated for this application. The synthesis to obtain polymers with high molar masses up to 126.5 kg mol-1 is optimized and a thorough chemical and thermal analysis is performed. The polymers are 3D-printed into personalized cardiovascular stents using the state-of-the-art solvent-cast direct-writing technique, the potential of these stents to expand using their shape memory behavior is established, and it is shown that the stents are more resistant to compression than the poly(l-lactide) benchmark. Furthermore, the polymer's hydrolytic stability is demonstrated in an accelerated degradation study of 6 months. Finally, the stents are subjected to an in vitro biological evaluation, revealing that the polymer is non-hemolytic and supports significant endothelialization after only 7 days, demonstrating the enormous potential of these polymers to serve cardiovascular applications.

A shape-memory poly(ε-caprolactone) hybridized TiO2/poly(l-lactide) composite with antibacterial properties

Organic-inorganic composites as an efficient strategy to upgrade the structural and functional properties of synthetic polymers are attracting extensive attentions. However, there are few studies on the shape memory (SM) behavior of organic-inorganic composites. In the work, poly(ε-caprolactone) hybridized TiO2 nanomaterial (PCL-TiO2) is made as the switching phase and integrated into poly (l-lactide) (PLLA) to construct an SM composite. PCL-TiO2/PLLA shows "sea-island" structure and better interfacial adhesion than PCL/PLLA, which facilitates the transmission of elastic power between the switching phase and the fixing phase. PCL-TiO2 as switching phase exhibits lower enthalpy at 57 °C than PCL, and PCL-TiO2 also acts as "heat dispersion pump station", which builds a dynamically responsive system and initiates shape change. The shape fixing and recovery ratio of PCL-TiO2/PLLA are 93.9 % and 94.4 %, respectively, and go back to the original shape within 15 s at 57 °C. At the same time, PCL-TiO2 endows SMP with good antibacterial properties. Then this work provides a well-placed way for developing SM materials with structure-function integration.

Biosynthetic Plastics as Tunable Elastic and Visible Stent with Shape-Memory to Treat Biliary Stricture

Common biliary tract is ≈4 mm in diameter to deliver bile from liver to small intestine to help digestion. The abnormal narrowing leads to severe symptoms such as pain and nausea. Stents are an effective treatment. Compared with non-degradable stents which require repeated removal, biodegradable stents have the advantage of reducing secondary injury related to endoscopic operation and patient burden. However, current biodegradable materials may cause tissue hyperplasia and the treatment method does not target etiology of stricture. So recurrence rates after biodegradable stent implantation are still high. Here, a biodegradable helical stent fabricated from biosynthetic P(3HB-co-4HB) is reported. Tunable properties can be acquired through altering culture substrates. Stent shows shape memory in various solvents. The stent has an optimized design with helical structure and outer track. The self-expanding of helical structure and double drainage realized by outer track greatly improve drainage of bile. Importantly, stent-loading triamcinolone acetonide can inhibit proliferation of fibroblasts and reduce incidence of restricture. Therapeutic effect is also demonstrated in minipigs with biliary stricture. The results of minipig experiments show that biliary duct in treatment group is unobstructed and tissue hyperplasia is effectively inhibited.

Magnetite embedded κ-carrageenan-based double network nanocomposite hydrogel with two-way shape memory properties for flexible electronics and magnetic actuators

Shape memory hydrogels attract increasing attention as flexible strain sensors due to their shape recovery property that can improve the lifetime of the sensor. Herein, we have designed a magnetic shape memory hydrogel based on Fe₃O₄ nanoparticles, carrageenan, and poly (acrylamide-co-acrylic acid) with self-adhesive and conductive properties. The resulting double network hydrogel showed promising actuator and strain sensor applications. Electrical conductivity was observed in this hydrogel without using additional ions. The presence of magnetite nanoparticles increased the tensile strength and temporary shape fixity ratio to around 6.5 MPa and 94.3 %, respectively. The excellent cantilever and catheter-like behavior of the hydrogels were illustrated through magnetic routing by an external magnet. Also, these hydrogels demonstrated suitable performance in the 500 cycles strain sensing tests before and after their initial shape recovery.

Hierarchical network relaxation of a dynamic cross-linked polyolefin elastomer for advanced reversible shape memory effect

Reversible shape-memory polymers (RSMPs) are highly desired for soft actuators due to the repeatability of deformation. Herein, a polyolefin elastomer vitrimer (POEV) was prepared by constructing a dynamic cross-linked network based on boronic ester bonds. POEV showed varied network relaxation in a wide temperature range due to hierarchical network relaxation, and then the entropy decreased and the relaxation of POEV chains was facilely controlled by temperature. The controllable relaxation of POEV by programming the temperature enabled the actuation domain with a reduction in entropy and the skeleton domain with a relatively high entropy can be built in POEV, greatly affecting the reversible shape memory effects (RSMEs). The topological rearrangement resulted from the activated exchange of dynamic covalent bonds, which enables POEV with good shape reconfigurability, and allows for complicated 3D shapes and shape-shifting on demand. More interestingly, combining the decreasing entropy of POEV chains and fully topological rearrangement tailored by temperature, hybrid aligned carbon nanotubes (CNTs) can be constructed in POEV via a two-stage training. Then, the aligned CNTs can enhance the elasticity and act as a hybrid skeleton for RSMEs, avoiding the negative impact of CNTs on the reversible actuation strain. The hierarchical network relaxation facilitates combining all these unusual properties in one shape memory network synergistically, paving new avenues for realizing smart materials with advanced RSME.

Biodegradable smart materials with self-healing and shape memory function for wound healing

Notwithstanding the rapid development of suture elastomers to meet the needs of practical surgery, utilizing the elastomers' self-healing function as a surgical suture to facilitate the healing of wounds has not been addressed. Here, a biodegradable aliphatic polycarbonate smart elastomer, mPEG₁₁₃-b-PMBC _n , was synthesized from aliphatic polycarbonate monomer with methoxy polyethylene glycol (mPEG₁₁₃, 5.0 kDa) as initiator, which exhibited excellent mechanical properties, highly efficient self-repairing, and remarkable shape memory behavior. The polymers possess outstanding self-healing ability for 150 min. Meanwhile, after 46.33 ± 1.18 s, the temporary shape of the obtained polymer had been recovered. The results of biocompatibility tests reveal that the polymers have excellent biocompatibility and can be regarded as good biomedical materials. Then, in vivo experiments were used to prove the self-healing knotting ability of the polymers and quickly close a wound surface using a programmed shape at physiological temperature. The results demonstrated that the injury wound can be effectively healed compared with traditional sutures, which will offer new study suggestions for subsequent healing areas.

Advances in the development of biodegradable coronary stents: A translational perspective

Implantation of cardiovascular stents is an important therapeutic method to treat coronary artery diseases. Bare-metal and drug-eluting stents show promising clinical outcomes, however, their permanent presence may create complications. In recent years, numerous preclinical and clinical trials have evaluated the properties of bioresorbable stents, including polymer and magnesium-based stents. Three-dimensional (3D) printed-shape-memory polymeric materials enable the self-deployment of stents and provide a novel approach for individualized treatment. Novel bioresorbable metallic stents such as iron- and zinc-based stents have also been investigated and refined. However, the development of novel bioresorbable stents accompanied by clinical translation remains time-consuming and challenging. This review comprehensively summarizes the development of bioresorbable stents based on their preclinical/clinical trials and highlights translational research as well as novel technologies for stents (e.g., bioresorbable electronic stents integrated with biosensors). These findings are expected to inspire the design of novel stents and optimization approaches to improve the efficacy of treatments for cardiovascular diseases.

•

Bioresorbable stents can overcome the limitations of non-degradable stents.

•

3D printing of shape-memory polymeric stents can lead to better clinical outcomes.

•

Advances in Mg-, Fe- and Zn-based stents from a translational perspective.

•

Electronic stents integrated with biosensors can covey stent status in real time.

•

Development in the assessment of stent performance in vivo.

Current status and outlook of potential applications of biodegradable materials in cerebral vascular stents

The treatment of intracranial aneurysms (IAs) has undergone a very significant transformation in recent decades, and endovascular interventions have gradually become one of the most common treatments. As permanent metal stents can cause some degree of long-term damage to patients, biodegradable stent materials are emerging as attractive potential alternatives. By reviewing the current research status and the advantages and disadvantages of existing biodegradable biomaterials, this review expects to provide a valuable reference for subsequent research on biodegradable biomaterials.

Stiffness Variable Polymers Comprising Phase-Changing Side-Chains: Material Syntheses and Application Explorations

Stiffness variable materials have been applied in a variety of engineering fields that require adaptation, automatic modulation, and morphing because of their unique property to switch between a rigid, load-bearing state and a soft, compliant state. Stiffness variable polymers comprising phase-changing side-chains (s-SVPs) have densely grafted, highly crystallizable long alkyl side-chains in a crosslinked network. Such a bottlebrush network-like structure gives rise to rigidity modulation as a result of the reversible crystallization and melting of the side chains. The corresponding modulus changes can be more than 1000-fold within a narrow temperature span, from ≈10²  MPa to ≈10²  kPa or lower. Other important properties of the s-SVP, such as stretchability, optical transmittance, and adhesion, can also be altered. This work reviews the underlying molecular mechanisms in the s-SVP's, discusses the material's structure-property relationship, and summarizes important applications explored so far, including reversible shape transformation, bistable electromechanical transduction, optical modulation, and reversible adhesion.

Mechanisms Affecting Physical Aging and Swelling by Blending an Amphiphilic Component

Polymer blending is a promising method to overcome stability obstacles induced by physical aging and swelling of implant scaffolds prepared from amorphous polymers in biomedical application, since it will not bring potential toxicity compared with chemical modification. However, the mechanism of polymer blending still remains unclearly explained in existing studies that fail to provide theoretical references in material R&D processes for stability improvement of the scaffold during ethylene oxide (EtO) sterilization, long-term storage, and clinical application. In this study, amphiphilic poly(ethylene glycol)-co-poly(lactic acid) (PELA) was blended with amorphous poly(lactic-co-glycolic acid) (PLGA) because of its good miscibility so as to adjust the glass transition temperature (Tg) and hydrophilicity of electrospun PLGA membranes. By characterizing the morphological stability and mechanical performance, the chain movement and the glass transition behavior of the polymer during the physical aging and swelling process were studied. This study revealed the modification mechanism of polymer blending at the molecular chain level, which will contribute to stability improvement and performance adjustment of implant scaffolds in biomedical application.

A versatile and low-toxicity material for photothermal therapy in deeper tissues

The limited depth of the near infrared (NIR) response is one of the major flaws of the present photothermal therapy (PTT). In this article, thermosensitive polyurethane urea (TPUU) was synthesized by polymerization. Subsequent experiments showed that, compared with classical photosensitizers, TPUU has higher photothermal effects and lower cytotoxicity. These valuable properties could make the present PTT research provide more therapeutic options among different tissues and organs. As a practical example, TPUU was applied to regulate the intestinal flora through external NIR irradiation, which implied its promising expanded applications in deeper tissues.

Principles for Controlling the Shape Recovery and Degradation Behavior of Biodegradable Shape-Memory Polymers in Biomedical Applications

Polymers with the shape memory effect possess tremendous potential for application in diverse fields, including aerospace, textiles, robotics, and biomedicine, because of their mechanical properties (softness and flexibility) and chemical tunability. Biodegradable shape memory polymers (BSMPs) have unique benefits of long-term biocompatibility and formation of zero-waste byproducts as the final degradable products are resorbed or absorbed via metabolism or enzyme digestion processes. In addition to their application toward the prevention of biofilm formation or internal tissue damage caused by permanent implant materials and the subsequent need for secondary surgery, which causes secondary infections and complications, BSMPs have been highlighted for minimally invasive medical applications. The properties of BSMPs, including high tunability, thermomechanical properties, shape memory performance, and degradation rate, can be achieved by controlling the combination and content of the comonomer and crystallinity. In addition, the biodegradable chemistry and kinetics of BSMPs, which can be controlled by combining several biodegradable polymers with different hydrolysis chemistry products, such as anhydrides, esters, and carbonates, strongly affect the hydrolytic activity and erosion property. A wide range of applications including self-expending stents, wound closure, drug release systems, and tissue repair, suggests that the BSMPs can be applied as actuators on the basis of their shape recovery and degradation ability.

Nanohybrid-Reinforced Gelatin-Ureidopyrimidinone-Based Self-healing Injectable Hydrogels for Tissue Engineering Applications

The traditional hydrogels are prone to break due to the applied stress. The deformation of the implanted hydrogels would result in the loss of structural integrity, leading to the failure of hydrogel functionalities and tissue regeneration. Self-healing hydrogels (AG-UPy), composed of oxidized alginate and ureidopyrimidinone-functionalized gelatin (G-UPy), were developed to address this challenge. These self-healing hydrogels possess two independent healing mechanisms, viz., Schiff base formation and UPy dimerization. These hydrogels were compared with oxidized alginate-gelatin (AG) hydrogels. AG-UPy hydrogels showed effective self-healing in a short time (about 2 min) after applying 800% strain, wherein recovery was not achieved with the AG hydrogel. However, the shear-thinning property of UPy made the AG-UPy hydrogel mechanically weaker than the AG hydrogel. To improve the mechanical strength of the AG-UPy hydrogel, we impregnated poly(ethylene glycol)-poly(urethane)/cloisite nanohybrid (PEG-PU/C) to prepare the AG-UPy/PEG-PU/C hydrogel. The incorporation of PEG-PU/C resulted in a 20-fold increase in the compression strength compared to that of the AG-UPy hydrogel. The AG-UPy/PEG-PU/C hydrogels also showed rapid self-healing. Incorporating the nanohybrid improved the cell proliferation by 2- and 1.25-fold compared to that of the AG and AG-UPy hydrogels, respectively. Therefore, PEG-PU/C combined with the UPy-functionalized polymer could be used to modulate mechanical strength and self-healing and enhance cell proliferation.

Intelligent Polymers, Fibers and Applications

Intelligent materials, also known as smart materials, are capable of reacting to various external stimuli or environmental changes by rearranging their structure at a molecular level and adapting functionality accordingly. The initial concept of the intelligence of a material originated from the natural biological system, following the sensing–reacting–learning mechanism. The dynamic and adaptive nature, along with the immediate responsiveness, of the polymer- and fiber-based smart materials have increased their global demand in both academia and industry. In this manuscript, the most recent progress in smart materials with various features is reviewed with a focus on their applications in diverse fields. Moreover, their performance and working mechanisms, based on different physical, chemical and biological stimuli, such as temperature, electric and magnetic field, deformation, pH and enzymes, are summarized. Finally, the study is concluded by highlighting the existing challenges and future opportunities in the field of intelligent materials.

Biofilm Removal by Reversible Shape Recovery of the Substrate

Bacteria can colonize essentially any surface and form antibiotic resistant biofilms, which are multicellular structures embedded in an extracellular matrix secreted by the attached cells. To develop better biofilm control technologies, we recently demonstrated that mature biofilms can be effectively removed through on-demand shape recovery of a shape memory polymer (SMP) composed of tert-butyl acrylate (tBA). It was further demonstrated that such a dynamic substratum can sensitize the detached biofilm cells to antibiotics. However, this SMP can undergo shape change only once, limiting its application in long-term biofilm control. This motivated the present study, which aimed to prove the concept that biofilm can be effectively removed by repeated on-demand shape recovery. Reversible shape memory polymers (rSMPs) containing poly(ε-caprolactone) diisocyanatoethyl dimethacrylate (PCLDIMA) of varying molecular masses and butyl acrylate (BA) as a linker were synthesized by using benzoyl peroxide (BPO) as a thermal initiator. By comparison of several combinations of PCLDIMA of different molecular masses, a 2:1 weight ratio mixture of 2000 and 15000 g/mol PCLDIMA was the most promising because it had a shape transition (at 36.7 °C) close to body temperature. The synthesized rSMP demonstrated good reversible shape recovery and up to 94.3 ± 1.0% removal of 48 h Pseudomonas aeruginosa PAO1 biofilm cells after three consecutive shape recovery cycles. Additionally, the detached biofilm cells were found to be 5.0 ± 1.2 times more susceptible to 50 μg/mL tobramycin than the static control.

H-Bonding Supramolecular Hydrogels with Promising Mechanical Strength and Shape Memory Properties for Postoperative Antiadhesion Application

Development of a physical barrier with mechanical properties similar to human smooth muscle and an on-demand degradation profile is crucial for the clinical prevention of postoperative adhesion. Herein, a series of supramolecular hydrogels (PMI hydrogels) composed of poly(ethylene glycol) (PEG), methylenediphenyl 4, 4-diisocyanate (MDI), and imidazolidinyl urea (IU, hydrogen bonding reinforced factor) with biodegradability and high toughness are reported to serve as physical barriers for abdominal adhesion prevention. The tensile fracture strength and strain of the PMI hydrogels could be adjusted in the ranges of 0.6-2.3 MPa and 100-440%, respectively, and their Young's moduli (0.2-1.6 MPa) are close to that of human soft tissues like smooth muscle and skin tissue as well as they have outstanding shape memory properties. The PMI hydrogels show good cell and tissue biocompatibility, and the in vivo retention time is in accord with the needs for the postoperative antiadhesion physical barriers. Through an abdominal defect model on mice, this study shows that the PMI hydrogel can completely prevent tissue adhesion compared to the commercialized Seprafilm with high safety. Owing to the promising mechanical properties and good biocompatibility, the PMI hydrogels may be extended for various biomedical applications and the development of advanced flexible electronic devices.

Influence of functionalized core-shell structure on the thermodynamic and shape memory properties of nanocomposites

Filler/matrix interfacial cohesion exerts a straightforward effect on stress transfer at the interface in composite structures, thereby significantly affecting their integrated mechanical properties. Thus, controlling the interface interaction of polymers/fillers is essential for the fabrication of high-performance polymer composites. In this work, a functionalized core-shell structured hybrid was prepared via charge attraction and applied as a novel filler in the trans-1,4-polyisoprene matrix to improve the interfacial interaction of the filler/matrix. A series of tests on the micro- and macroscale was performed to investigate its thermal, mechanical and shape memory performances. The obtained results show that while guaranteeing the shape memory properties of the composites, the utilization of the core-shell structured hybrid not only improved the heat resistant performance, but also contributed to better mechanical properties. This provides solid evidence for the potential of the innovative method presented herein, which may shed some light on the improvement of the interface design strategy and the development of composites with high performances.

Surface Structures, Particles, and Fibers of Shape-Memory Polymers at Micro-/Nanoscale

Shape-memory polymers (SMPs) are one kind of smart polymers and can change their shapes in a predefined manner under stimuli. Shape-memory effect (SME) is not a unique ability for specific polymeric materials but results from the combination of a tailored shape-memory creation procedure (SMCP) and suitable molecular architecture that consists of netpoints and switching domains. In the last decade, the trend toward the exploration of SMPs to recover structures at micro-/nanoscale occurs with the development of SMPs. Here, the progress of the exploration in micro-/nanoscale structures, particles, and fibers of SMPs is reviewed. The preparation method, SMCP, characterization of SME, and applications of surface structures, free-standing particles, and fibers of SMPs at micro-/nanoscale are summarized.

A facile preparation strategy of polycaprolactone (PCL)-based biodegradable polyurethane elastomer with a highly efficient shape memory effect

A polycaprolactone (PCL)-based biodegradable polyurethane elastomer with a highly efficient shape memory effect.

Design, synthesis, and characterization of novel organic–inorganic hybrid polymeric materials for electroluminescence applications

Design and syntheses of two electroluminescent metallopolymers from a novel, multidentate, redox active, and di-anionic organic building block.

Mechanically robust enzymatically degradable shape memory polyurethane urea with a rapid recovery response induced by NIR

NIR-light triggered shape memory process involving PU/gold-nanorod composites is shown.

Tunable shape memory behavior of polymer with surface modification of nanoparticles

In-situ inclusion of different nanoclays during synthesis results in different level of dispersion of nanoclays in the polymer matrix depending upon the surface modification of the nanoclay. Higher intercalation of the polymer chains within the galleries of organically modified nanoclay results better dispersion as compared to pristine nanoclay. The spectroscopic measurement shows that the extent of interaction between the nanoclay and polymer chains is higher in modified nanoclay nanocomposite which decreases the crystallinity considerably as compared to pristine clay nanocomposite. Interestingly, shape memory behavior measured at physiological temperature (37 °C) improves significantly in presence of organically modified nanoclay while it decreases in presence of unmodified nanoclay in same polyurethane matrix. Complete melting of soft segment along with restricted flipping of hard segment with temperature in presence of extensive interaction in nanocomposite with modified nanoclay helps it to achieve better shape memory behavior against flipping induced stacking of hard segment with temperature along with poor interaction decreases its shape memory behavior in nanocomposite with unmodified nanoclay. Temperature dependent nanostructure reveals the cause of variation in shape memory behavior in presence of organically modified nanoclay. Further, the cell culture studies like cell adhesion, cell viability assay and fluorescence imaging, suggest superior biomaterial of the nanocomposite with modified nanoclay as compared to other composite. Better biodegradable nature of the modified nanocomposite makes it suitable candidate for its potential biomedical applications.

Biomaterials for Interfacing Cell Imaging and Drug Delivery: An Overview

This feature article provides an overview of different kinds of futuristic biomaterials which have the potential to be used for fluorescent imaging and drug delivery, often simultaneously. The synthesis route or preparation process, fluorescence property, release profile, biocompatibility, bioimaging, and mechanistic approaches are vividly discussed. These include bioimaging with fluorescently doped quantum dots, mesoporous silica, noble metals, metal clusters, hydrophilic/hydrophobic polymers, semiconducting polymer dots, carbon/graphene dots, dendrimers, fluorescent proteins, and other nanobiomaterials. Another section discusses the controlled and targeted drug, gene, or biologically active material delivery using various vehicles such as micelles, 2D nanomaterials, organic nanoparticles, polymeric nanohybrids, and chemically modified polymers. In the last section, we discuss biomaterials, which can deliver biologically active molecules, and imaging the cell/tissue.

Retracted Article: A bio-based piezoelectric nanogenerator for mechanical energy harvesting using nanohybrid of poly(vinylidene fluoride)

A bio-based piezoelectric egg shell membrane (ESM) is used for energy harvesting applications in the form of two and three-component nanohybrids. A bio-waste piezo-filler in a piezoelectric polymer matrix was designed through an induced β-phase nucleation in the matrix using an organically modified two-dimensional nanoclay. Structural alteration (α to β-phase) in the presence of the nanoparticles was also manifested by morphological changes over spherulite to a needle-like morphology; thus, these nanohybrid materials are suitable for energy harvesting applications. ESM-based nanogenerators were fabricated with local ordering of piezo phases, as revealed via atomic force microscopy, leading to the generation of mostly electroactive phases in the whole nanohybrid. The voltage outputs from the optimized device were measured to be ∼56 and 144 V in single and multiple stacks (five), respectively, with corresponding power densities of 55 μW cm^-2 and 100 μW cm^-2. The efficiency of the device was verified using a variety of body movements, e.g. bending, twisting, walking, and foot tapping, causing mechanical energy dissipation, which eventually transformed into energy storage. The underlying mechanism of high conversion of energy is explained by the synergistically induced piezo-phase in the polymer matrix together with the floppy piezo-filler. The mechanical stability, durability and repeated energy conversion of the hybrid device make it a robust nanogenerator. The biocompatibility of the nanogenerator was verified through cellular studies, demonstrating its appropriate use in powering biomedical devices/implants.