Pure Hydrocarbon Hosts Enabling Efficient Multi-Resonance TADF Blue-Emitting Organic Light-Emitting Diodes

Pure hydrocarbon (PHC) materials are a class of highly efficient and stable host materials for organic light-emitting diodes (OLEDs), composed solely of carbon and hydrogen atoms. Despite recent great advancements in PHC research, their applications are still mainly limited to phosphorescent OLEDs (PHOLEDs). High-performance blue OLEDs still pose a considerable challenge. Thus, expanding PHC materials into other types of OLEDs is critical for advancing organic electronic technologies. In this study, we designed a series of original high-triplet PHC materials based on a multi-substitution approach of the 9,9'-spirobifluorene (SBF) backbone and used them, for the first time, as a host in phosphorescence-sensitized multi-resonance thermally activated delayed fluorescence (MR-TADF) OLEDs. Devices based on the 2,6-bis(3,6-di-tert-butyl-9H-carbazol-9-yl)boron (DtBuCzB) emitter, using FIrpic or fac-Ir(tpz)3 as the sensitizer, achieved high maximum external quantum efficiency (EQEmax) values ranging from 29.1 % to 33.9 %. Additionally, blue MR-TADF OLED devices based on v-DABNA with a phosphorescent sensitizer (CN-Ir), demonstrated outstanding electroluminescent performance, with an EQEmax of approximately 31 % due to an excellent molecular orientation induced by the PHC hosts. All devices exhibited narrow full-width at half-maximum spectra and minimal efficiency roll-off. This study marks the first application of PHC materials as hosts in phosphorescence-sensitized MR-TADF OLEDs, highlighting their potential as promising candidates for next-generation blue OLEDs and offering a viable pathway to achieve high-performance devices.

Characterization of Cyclic [n]Spirobifluorenylene Compounds and Electron Delocalization in Their Radical Cation Species

Charge delocalization through spiro-conjugation provides insights for the rational design of next-generation charge transport materials. We have previously conducted studies using terminally alkyl-protected cyclic [3]spirobifluorenylene compound 1-[3], which features a cyclic structure composed of bifluorenyl units. ESR studies on this radical cation species have shown that its electron is delocalized over approximately three bifluorenyl units, meaning that it is delocalized across the entire molecule. In this study, we newly synthesized cyclic [n]spirobifluorenylene compounds 1-[4] and 1-[5] and investigated their spectroscopic and electrochemical properties, and chemical oxidation behavior. Additionally, DFT calculations were performed not only for the neutral species but also for the radical cation species. Furthermore, we examined the influence of the number of perpendicular π-conjugated units on electron delocalization in their radical cation species. As a result, ESR spectral analysis of the radical cation species 1-[4]·+ and 1-[5]·+ revealed that electrons were delocalized over 3.37 and 3.87 units, respectively, when considering bifluorenyl as the unit structure.

An Intervention into the Diverse Utilities of Fluorenes: A Brobdingnagian Family

The keyword "Fluorene" search in SciFinder found more than 57,000 results, including high-impact journal articles, review articles, patents, books, proceedings, etc. Against this background, a detailed enquiry has been made by our group on various classes of fluorenes and their relevancy. For the past several decades, fluorene and its related compounds have experienced extensive studies, which are attributed to the vast range of applications they possess in various fields like sensors, polymers, OLED devices and even in the pharmaceutical industries. Since fluorene is an important member of the 'polyaromatic-hydrocarbon' family and has proved its relevancy in multidisciplinary areas, summarising those milestones might be worthwhile for future researchers. Here, we intend to highlight the key applications of fluorene derivatives in the form of a review article and have put much effort into consolidating some of their most imperative applications, including those in sensors and medicinal, optoelectronic and electrochemical fields. The manuscript divides the fluorene family into multiple subclasses, counting mono- and polyfluorenes, spirofluorenes, silicon-cored fluorenes, indenofluorenes, etc., based on their structure, and portrays all the critical properties of each class. Since fluorenes are globally accepted as outstanding candidates for numerous applications and practicalities, our effort may find crucial acceptance in the near future.

Spiro-Buckybowls: Synthesis and Selective Transformations Toward Chiral and Nonlinear Optical Polycycles

Integration of spirocycles with buckybowls is a promising strategy to construct three-dimensional (3D) curved π-systems and to endow distinctive physicochemical features arising from buckybowls. Herein, a series of carbon-bridged spiro-type heterosumanenes (spiro-HSEs) were synthesized by combining 9,9'-spirobifluorene and dichalcogenasumanenes (DCSs). It is found that spiro-conjugation plays an important role in the geometric and electronic structures of spiro-HSEs. The bowl depth of DCSs moiety becomes larger in the spiro-HSEs. Owing to the Jahn-Teller (J-T) effect, two DCSs segments of spiro-HSEs have different bowl depths accompanied with the unequal distribution of charge in radical cation state. Taking advantage of the typical reactions of DCSs, selective transformations of spiro-HSEs have been adopted in accordance to the nature of chalcogen atoms (S, Se, Te) to bestow the value-added functionalities. The emissive property is enhanced by converting the thiophene rings of S-doped spiro-HSE into thiophene S,S-dioxides. A chiroptical polycycle could be produced by ring-opening of the edge benzene of Se-doped spiro-HSE. The covalent adduct of Te-doped spiro-HSE with Br2 forms non-centrosymmetric halogen-bonded networks, resulting in the high performance second-order nonlinear optics (NLO).

The Synthesis and Properties of Spirophenanthrene

Motivated by the success of 9,9'-spirobifluorene (SBF) in optoelectronic materials, we synthesized a novel spiro compound, spirophenanthrene (SP). Incorporating a phenanthrene unit as the core, we aimed to leverage the π-conjugation of SPs to surpass the limitations of SBF. Experimental and theoretical studies revealed significant advantages over SBF, including red-shifted wavelengths, tunable LUMO energy levels, and enhanced thermal stability. These advantages suggest the potential of SPs as versatile building blocks for diverse optoelectronic devices.

Spirobifluorene Trimers: High Triplet Pure Hydrocarbon Hosts for Highly Efficient Blue Phosphorescent Organic Light-Emitting Diodes

Pure aromatic hydrocarbon materials (PHCs) represent a new generation of host materials for phosphorescent OLEDs (PhOLEDs), free of heteroatoms. They reduce the molecular complexity, can be easily synthesized and are an important direction towards robust devices. As heteroatoms can be involved in bonds dissociations in operating OLEDs through exciton induced degradation processes, developing novel PHCs appear particularly relevant for the future of this technology. In the present work, we report a series of extended PHCs constructed by the assembly of three spirobifluorene fragments. The resulting positional isomers present a high triplet energy level, a wide HOMO/LUMO difference and improved thermal and morphological properties compared to previously reported PHCs. These characteristics are beneficial for the next generation of host materials for PhOLEDs and provide relevant design guidelines. When used as a host in blue-emitting PhOLEDs, which are still the weakest link of the field, a very high EQE of 24 % and low threshold voltage of 3.56 V were obtained with a low-efficiency roll-off. This high performance strengthens the position of PHC strategy as an efficient alternative for OLED technology and opens the way to a more simple electronic.

Crafting 1,4-diaryl spirobifluorene hosts in OLEDs via interannular C-H arylation: synergistic effects of molecular linearity and orthogonality

In this work, we present a design concept of introducing linear structures into the orthogonal configuration of 9,9'-spirobifluorene (SBF), aiming to enhance carrier mobilities while maintaining high triplet energies (E T), which are two critical parameters for optimizing host materials in organic light-emitting diodes (OLEDs). To validate our proposed design, four pivotal model molecules of 1,4-diaryl SBFs were synthesized via interannular C-H arylation of bi(hetero)aryl-2-formaldehydes, a task challenging to accomplish using previous synthetic methodologies. The orthogonal configuration and the steric hindrance of SBF lead to high E T through the conjugation breaking at C1 and C4 positions, rendering 1,4-diaryl SBFs suitable as universal pure hydrocarbon (PHC) hosts for red, green, and blue (RGB) phosphorescent OLEDs (PhOLEDs). Meanwhile, the linearity and relatively good planarity of the para-quaterphenyl structure promote high carrier mobilities through orderly intermolecular packing. The synergistic effects of linearity and orthogonality in 1-(para-biphenyl)-4-phenyl-SBF result in exceptional device performance with external quantum efficiencies (EQEs) of 26.0%, 26.1%, and 22.5% for RGB PhOLEDs, respectively. Notably, the green PhOLED exhibits minimal efficiency roll-off, positioning its device performances among the state-of-the-art in PHC hosts.

Copper-catalysed perarylation of cyclopentadiene: synthesis of hexaarylcyclopentadienes

While hexaphenylsilacyclopentadiene (hexaphenylsilole) is viewed as an archetypal Aggregation-Induced Emission (AIE) luminogen, its isostructural hydrocarbon surrogate hexaphenylcyclopentadiene has strikingly never been investigated in this context, most probably due to a lack of synthetic availability. Herein, we report a straightforward synthesis of hexaphenylcyclopentadiene, via the direct perarylation of cyclopentadiene upon copper(i) catalysis under microwave activation, with the formation of six new C-C bonds in a single synthetic operation. Using zirconocene dichloride as a convenient source of cyclopentadiene and a variety of aryl iodides as coupling partners, this copper-catalysed cross-coupling reaction gave rise to a series of unprecedented hexaarylcyclopentadienes. The latter are direct precursors of extended π-conjugated polycyclic compounds, and their cyclodehydrogenation under Scholl reaction conditions yielded helicenic 17,17-diarylcyclopenta[l,l']diphenanthrenes. These structurally complex polyannelated fluorene derivatives can now be prepared in only two synthetic steps from cyclopentadiene.

Phosphorescent Platinum(II) Complexes with a Spiro-fused Xanthene Unit: Synthesis and Photophysical Properties

Novel platinum(II) complexes, derived from the spiro[fluorene-9,9'-xanthene] (SFX) motif, were synthesized and combined with different auxiliary ligands such as acetylacetonate (acac), bis(2,4,6-trimethylphenyl)propane-1,3-dionate (mesacac) and dihydrobis(3,5-dimethylpyrazole-1-yl) borate. The final products were obtained in yields of up to 36 % and characterized by NMR, X-ray and combustion analysis. These complexes have structured green-blue emission spectra with Commission Internationale de l'Éclairage (CIExy) coordinates of (0.21;0.46). Excellent photoluminescence quantum yields (PLQYs) ranging from 87 %-91 % were found. The emission lifetimes vary from 33 μs to 43 μs. Calculations on the B3LYP/6-311++G** level of theory reveal, that the nature of the emissive state is dependent on the positional regioisomerism of the SFX motif. The 2-SFX complexes demonstrate ligand-centered (3LC) emission, while the 2'-SFX regioisomer with the mesacac ligand shows a strong 3MLCT character.

Pure Polycyclic Aromatic Hydrocarbon Isomerides with Delayed Fluorescence and Anti-Kasha Emission: High-Efficiency Non-Doped Fluorescence OLEDs

Pure polycyclic aromatic hydrocarbons (PAHs) consisting solely of carbon-hydrogen or carbon-carbon bonds offer great potential for constructing durable and cost-effective emitters in organic electroluminescence devices. However, achieving versatile fluorescence characteristics in pure PAHs remains a considerable challenge, particularly without the inclusion of heteroatoms. Herein, an efficient approach is presented that involves incorporating non-six-membered rings into classical pyrene isomerides, enabling simultaneous achievement of full-color emission, delayed fluorescence, and anti-Kasha emission. Theoretical calculations reveal that the intensity and distribution of aromaticity/anti-aromaticity in both ground and excited states play a crucial role in determining the excited levels and fluorescence yields. Transient fluorescence measurements confirm the existence of thermally activated delayed fluorescence in pure PAHs. By utilizing these PAHs as emitting layers, electroluminescent spectra covering the entire visible region along with a maximum external quantum efficiency of 9.1% can be achieved, leading to the most exceptional results among non-doped pure hydrocarbon-based devices.

Selective Schiff Base Formation of Group 9 Organometallic Complexes with Functionalized Spirobifluorene Ligands

Organic amines are important compounds present in a wide variety of products, which makes the development of new systems for their detection an interesting field of study. New organometallic complexes of group 9 [MCp*X(2'-R-2-py-SBF)] (M = Ir, Rh; R = H, X = Cl (6), R = H, X = OAc (7), R = CHO, X = Cl (8)), and [IrCp*Cl(2', 7-diCHO-2-py-SBF)] (9) (Cp* pentamethylcyclopentadienyl, SBF = 9,9'-spirobifluorene) bearing bidentate C-N ligands based on 9,9'-spirobifluorene were obtained and characterized by NMR spectroscopy, mass spectrometry, IR spectroscopy, and X-ray diffraction analysis when possible. The formation of a Schiff base to give complexes with the formula [MCp*Cl(2'-CH=NR-2-py-SBF)] (M = Ir, Rh; R = alkyl or aryl (10-12)), through condensation of an amine, and the aldehyde group present in these new complexes was studied leading to a selective reactivity depending on the nature of the amine and the metal center. While the iridium complexes only react with aromatic amines, the rhodium derivative requires heat for those but can react at room temperature with aliphatic amines.

Dihydroindenofluorenes as building units in organic semiconductors for organic electronics

This review aims to discuss organic semiconductors constructed on dihydroindenofluorene positional isomers, which are key molecular scaffolds in organic electronics. Bridged oligophenylenes are key organic semiconductors that have allowed the development of organic electronic technologies. Dihydroindenofluorenes (DHIFs) belong to the family of bridged oligophenylenes constructed on a terphenyl backbone. They have proven to be very promising building blocks for the construction of highly efficient organic semiconductors for all OE devices, namely organic light emitting diodes (OLEDs), phosphorescent OLEDs, organic field-effect transistors (OFETs), solar cells, etc.

Recent Progress in the Synthesis of Silaspiranes

Silaspiranes bearing a spiro-silicon center are promising ring frameworks for the synthesis of novel spirocyclic molecules possessing unique properties. Development of efficient methods towards these ring structures has therefore attracted considerable attentions of synthetic chemists. This minireview highlights the representative advances in the field, and is categorized into four parts according to the ring formation strategies: cyclization, annulation, ring expansion and cycloaddition.

Intramolecular Electron Transfer in Multi-Redox Systems Based on Cyclic [3]Spirobifluorenylene Compound

Cyclic [3]spirobifluorenylene with bulky alkyl groups at the ends (1) was designed and synthesized to investigate the electron transfer phenomena in a π-conjugated system including orthogonal π-conjugated chains. The three bifluorenyl units in 1 are conjugated to each other via spiro-conjugation, resulting in the splitting of the HOMO levels to a small extent. Therefore, the SOMO-HOMO gap of the radical cation species is small, which is considered to allow the facile intramolecular electron transfer. The electronic properties of 1 and its partial structures were characterized by absorption and fluorescence measurements and electrochemical analysis. From the electrochemical oxidation, the interchain Coulombic repulsion was observed. In the TD-DFT calculations for the radical cation species of 1, the geometry-featured interchain electronic transitions were visualized by NTO calculations. The radical cation species of 1 generated by chemical oxidation with SbCl5 exhibited a broadened and lower-energy NIR absorption band exceeding 2000 nm. Considering the results of the TD-DFT calculations, the NIR band of the radical cation of 1 was attributed to the intramolecular electron transfer processes among the bifluorenyl units in the macrocycle. ESR experiments also indicated the delocalization of a spin of 1⋅+ in the whole molecule via hole hopping in the ESR time scale at room temperature. This work demonstrates the usefulness of spiro-conjugation as a bridging unit in molecular wires to facilitate smooth electron transfer.

Regioselectivity Control in Spirobifluorene Nitration under Mild Conditions: Explaining the Crivello's Reagent Mechanism

The regioselective nitration of 9,9'-spirobifluorene under mild conditions is reported for the first time by operating under Menke's and Crivello's conditions. The optimized protocol allows obtaining 2-nitro and 2,2'-dinitro-9,9'-spirobifluorene in yields of 79 and 95% and, for the first time, 2,2',7-trinitro-9,9'-spirobifluorene with 66% yield. Besides, the role of dinitrate salt in Crivello's protocol has been now clarified, which opens novel scenarios in the preparation of functional materials.

Spiroborate-Based Host Materials with High Triplet Energies and Ambipolar Charge-Transport Properties

Organic light-emitting diodes (OLEDs) receive considerable attention because of their commercial use in flat panel displays. Herein, highly efficient spiroborate-based host materials are reported for use in blue OLEDs. Our designed spiroborates (SBOX) were simple to synthesize and exhibited high triplet excitation energies, narrow S-T gaps, and balanced charge carrier mobilities. A blue OLED containing one of the designed spiroborates, SBON, as a host exhibited a high external quantum efficiency (27.6 %) and low turn-on voltage (3.7 V) compared to those observed using 3,3'-di(9H-carbazol-9-yl)-1,1'-biphenyl (17.6 % and 4.5 V, respectively), indicating their potential as host materials in OLEDs.

Modulating the G-Quadruplex and Duplex DNA Binding by Controlling the Charge of Fluorescent Molecules

Two fluorescent and non-toxic spirobifluorene molecules bearing either positive (Spiro-NMe3) or negative (Spiro-SO3) charged moieties attached to the same aromatic structure have been investigated as binders for DNA. The novel Spiro-NMe3 containing four alkylammonium substituents interacts with G-quadruplex (G4) DNA structures and shows preference for G4s over duplex by means of FRET melting and fluorescence experiments. The interaction is governed by the charged substituents of the ligands as deduced from the lower binding of the sulfonate analogue (Spiro-SO3). On the contrary, Spiro-SO3 exhibits higher binding affinity to duplex DNA structure than to G4. Both molecules show a moderate quenching of the fluorescence upon DNA binding. The confocal microscopy evaluation shows the internalization of both molecules in HeLa cells and their lysosomal accumulation.

Superacid Promoted Synthesis of 9,9'-Spirobifluorenes and Related Aza- and Diazaspirocycles

A variety of 9,9'-spirobifluorenes and related azaspirocycles and diazaspirocycles have been prepared in high yields by intramolecular Friedel-Crafts reaction using the Brønsted superacid, triflic acid (CF₃SO₃H). Compared to weaker Brønsted acids, the superacid consistently provides better yields along with reduced reaction times and it eliminates the need for heating. The superacid is particularly effective when dicationic electrophilic intermediates are generated in the conversions, for example with the diazaspirocycle syntheses.

Cyclometalated Spirobifluorene Imidazolylidene Platinum(II) Complexes with Predominant 3LC Emissive Character and High Photoluminescence Quantum Yields

Two novel bidentate C^C*_spiro cyclometalated platinum(II) complexes comprising a spiro-conjugated bifluorene ligand and different β-diketonate auxiliary ligands are synthesized and characterized. Their preparation employs a robust and elaborate synthetic protocol commencing with an N-heterocyclic carbene precursor. Structural characterization by means of NMR techniques and solid-state structures validate the proposed and herein presented molecular scaffolds. Photophysical studies, including laser flash photolysis methods, reveal an almost exclusively ligand-centered triplet state, governed by the C^C*_spiro-NHC ligand. The high triplet energies and the long triplet lifetimes in the order of 30 μs in solution make the complexes good candidates for light-emitting diode-driven photocatalysis, as initial energy transfer experiments reveal. In-depth time-dependent density functional theory investigations are in excellent accordance with our spectroscopic findings. The title compounds are highly emissive in the bluish-green color region with quantum yields of up to 87% in solid-state measurements.

Pure Hydrocarbon Materials as Highly Efficient Host for White Phosphorescent Organic Light-Emitting Diodes: A New Molecular Design Approach

To date, all efficient host materials reported for phosphorescent OLEDs (PhOLEDs) are constructed with heteroatoms, which have a crucial role in the device performance. However, it has been shown in recent years that the heteroatoms not only increase the design complexity but can also be involved in the instability of the PhOLED, which is nowadays the most important obstacle to overcome. Herein, we design pure aromatic hydrocarbon materials (PHC) as very efficient hosts in high-performance white and blue PhOLEDs. With EQE of 27.7 %, the PHC-based white PhOLEDs display similar efficiency as the best reported with heteroatom-based hosts. Incorporated as a host in a blue PhOLED, which are still the weakest links of the technology, a very high EQE of 25.6 % is reached, surpassing, for the first time, the barrier of 25 % for a PHC and FIrpic blue emitter. This performance shows that the PHC strategy represents an effective alternative for the future development of the OLED industry.

Furan-Containing Chiral Spiro-Fused Polycyclic Aromatic Compounds: Synthesis and Photophysical Properties

Spiro-fused polycyclic aromatic compounds (PACs) have received growing interest as rigid chiral scaffolds. However, furan-containing spiro-fused PACs have been quite limited. Here, we design spiro[indeno[1,2-b][1]benzofuran-10,10′-indeno[1,2-b][1]benzothiophene] as a new family of spiro-fused PACs that contains a furan unit. The compound was successfully synthesized in enantiopure form and also transformed to its S,S-dioxide derivative and the pyrrole-containing analog via aromatic metamorphosis. The absorption and emission properties of the obtained furan-containing chiral spiro-fused PACs are apparently different from those of their thiophene analogs that have been reported, owing to the increased electron-richness of furan compared to thiophene. All of the furan-containing chiral spiro-fused PACs were found to be circularly polarized luminescent materials.

Discrete palladium clusters that consist of two mutually bisecting perpendicular planes

The construction of novel molecules with unprecedented alignments of the constituent elements has revolutionized the field of functional materials. The arrangement of two or more planar subunits in a mutually perpendicular fashion is a frequently encountered approach to produce novel functional materials. Previous examples of such materials can be categorized into two well-investigated families: spiro-conjugated and dumbbell-shaped structures, wherein the two planes are aligned orthogonally via a single atom or an axis, respectively. This article describes a third family: reaction of [Pd(CN^tBu)₂]₃ with Sn₃Me₈ or Ge₆Me₁₂ afforded a Pd₇Sn₄ cluster and a Pd₈Ge₆ cluster that consist of two mutually bisecting perpendicular planes. In the Pd₇Sn₄ cluster, the two equivalent Pd₅Sn₂ planes share three palladium atoms that include a dihedral angle of 85.6°.

The construction of Pd₇Sn₄ and Pd₈Ge₆ clusters that consist of two mutually bisecting perpendicular planes was accomplished by the reaction of [Pd(CN^tBu)₂]₃ with Me₃Sn–SnMe₂–SnMe₃ or Ge₆Me₁₂.

ON/OFF Spiroconjugation through Peripheral Functionalization: Impact on the Reactivity and Chiroptical Properties of Spirobifluorenes

Spirobifluorenes are an important class of spiro compounds frequently used in the field of organic electronics. However, harnessing spiroconjugation to obtain high-performance in such structural motifs remains unexplored. We herein propose that peripheral functionalization may serve as a useful tool to control spiroconjugation in an ON/OFF manner on both chemical reactivity and photophysical properties. In particular, the ratio of mono- and di-functionalized spirobifluorenes found experimentally during their synthesis were found to be 3/2, 7/2, and 12/2 for phenyl, nitro-phenyl and amino-phenyl analogues, respectively. These remarkable reactivity differences correlate with the spiroconjugation character evaluated theoretically at the CAM-B3LYP/6-31G(d,p) level of theory. Additionally, comparison of experimental and predicted optical and chiroptical responses shows that spiroconjugated molecular orbitals have a significant or negligible involvement on the main electronic transitions depending on the peripheral functionality of the spirobifluorene.

Research Progress of Intramolecular π-Stacked Small Molecules for Device Applications

Organic semiconductors can be designed and constructed in π-stacked structures instead of the conventional π-conjugated structures. Through-space interaction (TSI) occurs in π-stacked optoelectronic materials. Thus, unlike electronic coupling along the conjugated chain, the functional groups can stack closely to facilitate spatial electron communication. Using π-stacked motifs, chemists and materials scientists can find new ways for constructing materials with aggregation-induced emission (AIE), thermally activated delayed fluorescence (TADF), circularly polarized luminescence (CPL), and room-temperature phosphorescence (RTP), as well as enhanced molecular conductance. Organic optoelectronic devices based on π-stacked molecules have exhibited very promising performance, with some of them exceeding π-conjugated analogues. Recently, reports on various organic π-stacked structures have grown rapidly, prompting this review. Representative molecular scaffolds and newly developed π-stacked systems could stimulate more attention on through-space charge transfer the well-known through-bond charge transfer. Finally, the opportunities and challenges for utilizing and improving particular materials are discussed. The previous achievements and upcoming prospects may provide new insights into the theory, materials, and devices in the field of organic semiconductors.

Covalent nanosynthesis of fluorene-based macrocycles and organic nanogrids

Gridization is an alternative way to create macromolecules of various sizes in addition to linear and dendritic polymerization as well as cyclization. Organic nanogrids are an expanding family of macrocycle-like closed structures at the nanoscale, but with a series of well-defined extension edges and vertices. Cyclic nanogrids can be used as nanoscale building blocks for the fabrication of not only rotaxanes, catenanes, knots, 3D cages, but also nanopolymers, covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and complex molecular cross-scale architectures. In this review, the history of fluorene-based macrocycles has first been explored, followed by the development of the synthetic methodologies; in particular, fluorene-based nanogrids are highlighted owing to their features and applications. Typically, fluorenes are fused arenes with a hybrid entity between tetrahedral Csp³ and Csp². Four ingenious connection modes of fluorene-based macrocycles, including 2,7-, 3,6-, 9,9-, and 2,9-linkages, fully demonstrate the geometric possibilities of the macrocycles and nanogrids. Such fluorene-based nanogrids will give birth to organic intelligence.

Directed ortho and Remote Metalation-Suzuki-Miyaura Cross Coupling Route to Azafluorenol Core Liquid Crystals

Two new smectic C* mesogens containing a hexyloxy side chain and an azafluorenone (3a) or azafluorenol (3b) core were synthesized using a combined directed ortho metalation-directed remote metalation-Suzuki-Miyaura cross-coupling strategy. 3b was formed in 10 steps and 25% overall yield based on starting benzamide 1a. 3a forms a nematic phase, while 3b forms a smectic A phase. The large temperature range of the smectic phase for the azafluorenol 3b is indicative of mesophase stabilization by intermolecular hydrogen bonding between the hydroxyl group and pyridine nitrogen of neighboring 3b molecules.

Spiro-Based Thermally Activated Delayed Fluorescence Emitters with Reduced Nonradiative Decay for High-Quantum-Efficiency, Low-Roll-Off, Organic Light-Emitting Diodes

Herein, we report the use of spiro-configured fluorene-xanthene scaffolds as a novel, promising, and effective strategy in thermally activated delayed fluorescence (TADF) emitter design to attain high photoluminescence quantum yields (Φ_PL), short delayed luminescence lifetime, high external quantum efficiency (EQE), and minimum efficiency roll-off characteristics in organic light-emitting diodes (OLEDs). The optoelectronic and electroluminescence properties of SFX (spiro-(fluorene-9,9'-xanthene))-based emitters (SFX-PO-DPA, SFX-PO-DPA-Me, and SFX-PO-DPA-OMe) were investigated both theoretically and experimentally. All three emitters exhibited sky blue to green emission enabled by a Herzberg-Teller mechanism in the excited state. They possess short excited-state delayed lifetimes (<10 μs), high photoluminescence quantum yields (Φ_PL ∼ 70%), and small singlet-triplet splitting energies (ΔE_ST < 0.10 eV) in the doped films in an mCP host matrix. The OLEDs showed some of the highest EQEs using spiro-containing emitters where maximum external quantum efficiencies (EQE_max) of 11 and 16% were obtained for devices using SFX-PO-DPA and SFX-PO-DPA-OMe, respectively. Further, a record EQE_max of 23% for a spiro-based emitter coupled with a low efficiency roll-off (19% at 100 cd m^-2) was attained with SFX-PO-DPA-Me.

Iridium(III)-Catalyzed Diarylation/Annulation of Benzoic Acids: Facile Access to Multi-Aryl Spirobifluorenes as Pure Hydrocarbon Hosts for High-Performance OLEDs

Herein disclosed is the first example of diarylation/annulation of benzoic acids via an iridium catalyst system. This protocol provides a step-economic and highly efficient pathway to 1-aryl, 1,3-diaryl, 1,7-diaryl and 1,3,7-triaryl spirobifluorenes from readily available starting materials. The applications of multi-aryl spirobifluorenes as pure hydrocarbon (PHC) hosts for red, green, and blue (RGB) phosphorescent organic light-emitting diodes (PhOLEDs) were explored. Due to high triplet energies, 1,3-diaryl spirobifluorenes exhibit the potential as the host material of blue PhOLEDs. 1,7-Diaryl spirobifluorene can serve as the host of green PhOLEDs. 1,3,7-Triaryl spirobifluorene is a high-performance host for red PhOLEDs, which exhibits a high external quantum efficiency (EQE) up to 27.3 %. This work not only exemplifies the great potential of multi-aryl spirobifluorenes as PHC hosts, but also offers a new approach for the synthesis of these PHC hosts.

Rigidly Fused Spiro-Conjugated π-Systems

Spiro-fused π-systems have gained considerable attention for their application as semiconductors in molecular electronics. Here, a synopsis regarding recent breakthroughs in ladderized spirobifluorenes and indeno-spirobifluorenes, along with further spiro-condensed heteroatomic hydrocarbons with donor-acceptor moieties, is provided. Additionally, an extended range of rigid spirobifluorene polymers and specific doubly linked spiro-systems with partial chiral character is discussed. The diverse applications of the aforementioned structures are thoroughly evaluated.

Sky-Blue Thermally Activated Delayed Fluorescence with Intramolecular Spatial Charge Transfer Based on a Dibenzothiophene Sulfone Emitter

Intramolecular spatial charge transfer (ISCT) plays a critical role in determining the optical and charge transport properties of thermally activated delayed fluorescence (TADF) materials. Herein, a new donor/acceptor-type TADF compound based on rigid dibenzothiophene sulfone (DBTS) moiety, STF-DBTS, was designed and synthesized. Fluorene unit was used as a rigid linker to position the rigid acceptor and donor subunit in close vicinity with control over their spacing and molecular structure and to achieve high photoluminescence quantum yield (∼53%) and TADF property. For comparison purposes, we constructed the more flexible STF-DPS with a less rotationally constrained diphenylsulphone (DPS) acceptor instead of the rigid DBTS units, and STF-DPS showed no TADF properties and lower PLQY (16.0%). Organic light-emitting diodes (OLEDs) based on STF-DBTS achieve an external quantum efficiency (EQE) of 10.3% at 488 nm, which is a fivefold improvement in EQE with respect to STF-DPS.

Dual-Switching Electrochromism and Electrofluorochromism Derived from Diphenylamine-Based Polyamides with Spirobifluorene/Pyrene as Bridged Fluorescence Units

Electrochromic (EC)/electrofluorochromic (EFC) bifunctional materials are receiving great attention because of their promising applications in optoelectronic devices. However, the development of ideal EC/EFC bifunctional materials is still a great challenge because of the poor integration of EC/EFC performances (optical contrast, response speed, and switching stability). Herein, we reported two novel diphenylamine-based mixed valence (MV) polyamides (S-HPA and P-HPA) with spirobifluorene (2,7-positions) and pyrene (1,6-positions) as bridged fluorescence units, respectively, showing impressive cyclability and fluorescence contrast with rapid switching. Through the formation of an effective electronic coupling between the two nitrogen centers using spirobifluorene/pyrene bridges, we demonstrated that different bridges have significant effects on the thermal and electrooptical characteristics of polyamides. In addition to lower fluorescence quantum yield and glass transition temperature, the S-HPA exhibited superior cyclability (contrast change <3.4%/14% over 500/300 cycles for EC/EFC switching), higher color/fluorescence contrast (64%/304%), and faster switching time (<2.6 s), mainly owing to the shorter conjugated length and more twisted configuration of the spirobifluorene bridge. The design principle of MV polymers with fluorophore bridges proposed here will be a promising way to realize high-performance EC/EFC devices and will also provide new insights into their future development and applications.

Evolution of pure hydrocarbon hosts: simpler structure, higher performance and universal application in RGB phosphorescent organic light-emitting diodes

In the field of phosphorescent organic light-emitting diodes (PhOLEDs), designing high-efficiency universal host materials for red, green and blue (RGB) phosphors has been quite a challenge. To date, most of the high-efficiency universal hosts reported incorporate heteroatoms, which have a crucial role in the device performance. However, the introduction of different kinds of heterocycles increases the design complexity and cost of the target material and also creates potential instability in the device performance. In this work, we show that pure aromatic hydrocarbon hosts designed with the 9,9′-spirobifluorene scaffold are high-efficiency and versatile hosts for PhOLEDs. With external quantum efficiencies of 27.3%, 26.0% and 27.1% for RGB PhOLEDs respectively, this work not only reports the first examples of high-efficiency pure hydrocarbon materials used as hosts in RGB PhOLEDs but also the highest performance reported to date for a universal host (including heteroatom-based hosts). This work shows that the PHC design strategy is promising for the future development of the OLED industry as a high-performance and low-cost option.

In this work, we propose pure hydrocarbon materials as universal hosts for high-efficiency red, green and blue phosphorescent organic light-emitting diodes.