A Sweet Synthesis of MXenes

Two-dimensional transition metal carbides/nitrides (MXenes) have shown great promise in various applications. However, mass production of MXenes suffers from the excessive use of toxic fluorine-containing reagents. Herein, a new method was validated for synthesizing MXenes from five MAX ceramics. The method features a minimized (stoichiometric) dosage of F-containing reagent (NaBF4) and polyols (glycerol, erythritol, and xylitol) as the reaction solvent. Due to the sweetness of polyols and the low environmental impact, we refer to this method as a "sweet" synthesis of MXenes. An in-depth molecular dynamics simulation study, combined with experimental kinetic parameters, further revealed that the diffusion of F- in the confined interplanar space is rate-determining for the etching reaction. The expansion of interlayer spacing by polyols effectively reduces the diffusion activation energy of F- and accelerates the etching reaction.

Impact of surface charge density modulation on ion transport in heterogeneous nanochannels

The PNP nanotransistor, consisting of emitter, base, and collector regions, exhibits distinct behavior based on surface charge densities and various electrolyte concentrations. In this study, we investigated the impact of surface charge density on ion transport behavior within PNP nanotransistors at different electrolyte concentrations and applied voltages. We employed a finite-element method to obtain steady-state solutions for the Poisson-Nernst-Planck and Navier-Stokes equations. The ions form a depletion region, influencing the ionic current, and we analyze the influence of surface charge density on the depth of this depletion region. Our findings demonstrate that an increase in surface charge density results in a deeper depletion zone, leading to a reduction in ionic current. However, at very low electrolyte concentrations, an optimal surface charge density causes the ion current to reach its lowest value, subsequently increasing with further increments in surface charge density. As such, atV app = + 1 V andC 0 = 1 mM , the ionic current increases by 25% when the surface charge density rises from 5 to 20  mC . m - 2 , whereas atC 0 = 10 mM , the ionic current decreases by 65% with the same increase in surface charge density. This study provides valuable insights into the behavior of PNP nanotransistors and their potential applications in nanoelectronic devices.

Covalent Organic Framework Membranes from Oppositely Charged Nanosheets toward Efficient Desalination

Fabricating covalent organic framework (COF) membranes through the pre-assembly of nanosheets with different properties may open a novel avenue to the fabrication of advanced 2D membranes. Herein, COF membranes are fabricated using oppositely-charged COF nanosheets (CONs). Negatively-charged CONs and positively-charged CONs are pre-assembled through simple physical mixing, yielding the CONs with an aspect ratio of exceeding 10 000, which are assembled into three kinds of COF membranes. The optimal membranes exhibit the highest desalination performance with permeation flux of 132.66 kg m-2 h-1, salt rejection of 99.99%, and superior long-term operation stability.

On-Water Surface Synthesis of Vinylene-Linked Cationic Two-Dimensional Polymer Films as the Anion-Selective Electrode Coating

Vinylene-linked two-dimensional polymers (V-2DPs) and their layer-stacked covalent organic frameworks (V-2D COFs) featuring high in-plane π-conjugation and robust frameworks have emerged as promising candidates for energy-related applications. However, current synthetic approaches are restricted to producing V-2D COF powders that lack processability, impeding their integration into devices, particularly within membrane technologies reliant upon thin films. Herein, we report the novel on-water surface synthesis of vinylene-linked cationic 2DPs films (V-C2DP-1 and V-C2DP-2) via Knoevenagel polycondensation, which serve as the anion-selective electrode coating for highly-reversible and durable zinc-based dual-ion batteries (ZDIBs). Model reactions and theoretical modeling revealed the enhanced reactivity and reversibility of the Knoevenagel reaction on the water surface. On this basis, we demonstrated the on-water surface 2D polycondensation towards V-C2DPs films that show large lateral size, tunable thickness, and high chemical stability. Representatively, V-C2DP-1 presents as a fully crystalline and face-on oriented film with in-plane lattice parameters of a=b≈43.3 Å. Profiting from its well-defined cationic sites, oriented 1D channels, and stable frameworks, V-C2DP-1 film possesses superior bis(trifluoromethanesulfonyl)imide anion (TFSI-)-transport selectivity (transference, t_=0.85) for graphite cathode in high-voltage ZDIBs, thus triggering additional TFSI--intercalation stage and promoting its specific capacity (from ~83 to 124 mAh g-1) and cycling life (>1000 cycles, 95 % capacity retention).

Ionic Current Saturation Enabled by Cation Gating Effect in Metal-Organic-Framework Membranes

Ion transport through nanoporous two-dimensional (2D) membranes is predicted to be tunable by controlling the charging status of the membranes' planar surfaces, the behavior of which though remains to be assessed experimentally. Here we investigate ion transport through intrinsically porous membranes made of 2D metal-organic-framework layers. In the presence of certain cations, we observe a linear-to-nonlinear transition of the ionic current in response to the applied electric field, the behavior of which is analogous to the cation gating effect in the biological ion channels. Specifically, the ionic currents saturate at transmembrane voltages exceeding a few hundreds of millivolts, depending on the concentration of the gating cations. This is attributed to the binding of cations at the membranes' surfaces, tuning the charging states there and affecting the entry/exit process of translocating ions. Our work also provides 2D membranes as candidates for building nanofluidic devices with tunable transport properties.

Interlayer Engineering of Layered Materials for Efficient Ion Separation and Storage

Layered materials are characterized by strong in-plane covalent chemical bonds within each atomic layer and weak out-of-plane van der Waals (vdW) interactions between adjacent layers. The non-bonding nature between neighboring layers naturally results in a vdW gap, which enables the insertion of guest species into the interlayer gap. Rational design and regulation of interlayer nanochannels are crucial for converting these layered materials and their 2D derivatives into ion separation membranes or battery electrodes. Herein, based on the latest progress in layered materials and their derivative nanosheets, various interlayer engineering methods are briefly introduced, along with the effects of intercalated species on the crystal structure and interlayer coupling of the host layered materials. Their applications in the ion separation and energy storage fields are then summarized, with a focus on interlayer engineering to improve selective ion transport and ion storage performance. Finally, future research opportunities and challenges in this emerging field are comprehensively discussed.

Accurate prediction of solvent flux in sub-1-nm slit-pore nanosheet membranes

Nanosheet-based membranes have shown enormous potential for energy-efficient molecular transport and separation applications, but designing these membranes for specific separations remains a great challenge due to the lack of good understanding of fluid transport mechanisms in complex nanochannels. We synthesized reduced MXene/graphene hetero-channel membranes with sub-1-nm pores for experimental measurements and theoretical modeling of their structures and fluid transport rates. Our experiments showed that upon complete rejection of salt and organic dyes, these membranes with subnanometer channels exhibit remarkably high solvent fluxes, and their solvent transport behavior is very different from their homo-structured counterparts. We proposed a subcontinuum flow model that enables accurate prediction of solvent flux in sub-1-nm slit-pore membranes by building a direct relationship between the solvent molecule-channel wall interaction and flux from the confined physical properties of a liquid and the structural parameters of the membranes. This work provides a basis for the rational design of nanosheet-based membranes for advanced separation and emerging nanofluidics.

Terahertz electric field induced melting and transport of monolayer water confined in double-walled carbon nanotubes

Understanding the structures and dynamics of confined water in nanochannels holds great promise for various applications, ranging from membrane separation to blue energy collection. A setting of particular interest is the confined monolayer water within double-walled carbon nanotubes (DWCNTs), which demonstrates rich ice morphologies; however, the dynamics of this peculiar system are still unexplored. In this work, a series of molecular dynamics (MD) simulations reveal that the two-dimensional ice in DWCNTs can be effectively melted by terahertz electric fields but not by static electric fields, exhibiting an interesting ice to vapor-like transition along with extraordinary dynamical behaviors. Specifically, under appropriate field frequency, the water flow presents a sharp increase with the increase in field strength, indicating an excellent gating behavior. These remarkable findings are attributed to the resonance effect between the terahertz electric field and inherent vibration of water hydrogen bonds, causing the water molecules to change from the frozen to super permeation states. The amount of confined water exhibits a sudden reduction, confirming the breakdown of the hydrogen bond network. The distributions of density profiles, hydrogen bond number and dipole orientation demonstrate more details of the water structural change. Furthermore, under a certain field strength, the water flow shows a peculiar maximum behavior with the increase in field frequency, implying frequency optimization for water transport. These findings not only enhance our understanding of the phase transition behavior of water molecules confined within DWCNTs under the influence of a terahertz electric field but also provide a promising avenue for designing innovative nanofluidic devices.

Synthesis of Ultrathin High-Entropy Oxides with Phase Controllability

High-entropy oxides (HEOs) with an ultrathin geometric structure are especially expected to exhibit extraordinary performance in different fields. The phase structure is deemed as a key factor in determining the properties of HEOs, rendering their phase control synthesis tempting. However, the disparity in intrinsic phase structures and physicochemical properties of multiple components makes it challenging to form single-phase HEOs with the target phase. Herein, we proposed a self-lattice framework-guided strategy to realize the synthesis of ultrathin HEOs with desired phase structures, including rock-salt, spinel, perovskite, and fluorite phases. The participation of the Ga assistor was conducive to the formation of the high-entropy mixing state by decreasing the formation energy. The as-prepared ultrathin spinel HEOs were demonstrated to be an excellent catalyst with high activity and stability for the oxygen evolution reaction in water electrolysis. Our work injects new vitality into the synthesis of HEOs for advanced applications and undoubtedly expedites their phase engineering.

Ion transport in nanofluidics under external fields

Nanofluidic channels with tailored ion transport dynamics are usually used as channels for ion transport, to enable high-performance ion regulation behaviors. The rational construction of nanofluidics and the introduction of external fields are of vital significance to the advancement and development of these ion transport properties. Focusing on the recent advances of nanofluidics, in this review, various dimensional nanomaterials and their derived homogeneous/heterogeneous nanofluidics are first briefly introduced. Then we discuss the basic principles and properties of ion transport in nanofluidics. As the major part of this review, we focus on recent progress in ion transport in nanofluidics regulated by external physical fields (electric field, light, heat, pressure, etc.) and chemical fields (pH, concentration gradient, chemical reaction, etc.), and reveal the advantages and ion regulation mechanisms of each type. Moreover, the representative applications of these nanofluidic channels in sensing, ionic devices, energy conversion, and other areas are summarized. Finally, the major challenges that need to be addressed in this research field and the future perspective of nanofluidics development and practical applications are briefly illustrated.

Ion Transport Behavior in van der Waals Gaps of 2D Materials

2D materials, with advantages of atomic thickness and novel physical/chemical characteristics, have emerged as the vital building blocks for advanced lamellar membranes which possess promising potential in energy storage, ion separation, and catalysis. When 2D materials are stacked together, the van der Waals (vdW) force generated between adjacent layered nanosheets induces the construction of an ordered lamellar membrane. By regulating the interlayer spacing down to the nanometer or even sub-nanometer scale, rapid and selective ion transport can be achieved through such vdW gaps. The further improvement and application of qualified 2D materials-based lamellar membranes (2DLMs) can be fulfilled by the rational design of nanochannels and the intelligent micro-environment regulation under different stimuli. Focusing on the newly emerging advances of 2DLMs, in this review, the common top-down and bottom-up synthesis approaches of 2D nanosheets and the design strategy of functional 2DLMs are briefly introduced. Two essential ion transport mechanisms within vdW gaps are also involved. Subsequently, the responsive 2DLMs based on different types of external stimuli and their unique applications in nanofluid transport, membrane-based filters, and energy storage are presented. Based on the above analysis, the existing challenges and future developing prospects of 2DLMs are further proposed.

Recent Advances in Layered-Double-Hydroxide-Based Separation Membranes

The use of two-dimensional materials shows great promise for the development of next-generation membrane materials, thanks to their atomic thinness and the ease with which precise nanochannels can be constructed. Among these materials, layered double hydroxides (LDHs) stand out as an important class, possessing many features that make them ideal for constructing high-performance membranes. LDHs offer many advantages, such as their abundant and tunable interlayer anions, which enable the preparation of membranes with adjustable sub-nanometer pore sizes. Additionally, their hydrophilicity and positive charge characteristics afford them unique benefits. LDHs have been found to be effective in gas separation, ion sieving, and nanofiltration. This review provides a summary of the latest progress in using LDHs for membrane separation. It begins by introducing the basic properties of LDHs, followed by the assembly strategy for LDH membranes. Furthermore, the review presents the research status of LDHs membranes in various fields in a systematic manner. Lastly, the paper highlights some challenges and future prospects for preparing and applying LDHs membranes.

Enhancing ion selectivity by tuning solvation abilities of covalent-organic-framework membranes

Understanding the molecular-level mechanisms involved in transmembrane ion selectivity is essential for optimizing membrane separation performance. In this study, we reveal our observations regarding the transmembrane behavior of Li+ and Mg2+ ions as a response to the changing pore solvation abilities of the covalent-organic-framework (COF) membranes. These abilities were manipulated by adjusting the lengths of the oligoether segments attached to the pore channels. Through comparative experiments, we were able to unravel the relationships between pore solvation ability and various ion transport properties, such as partitioning, conduction, and selectivity. We also emphasize the significance of the competition between Li+ and Mg2+ with the solvating segments in modulating selectivity. We found that increasing the length of the oligoether chain facilitated ion transport; however, it was the COF membrane with oligoether chains containing two ethylene oxide units that exhibited the most pronounced discrepancy in transmembrane energy barrier between Li+ and Mg2+, resulting in the highest separation factor among all the evaluated membranes. Remarkably, under electro-driven binary-salt conditions, this specific COF membrane achieved an exceptional Li+/Mg2+ selectivity of up to 1352, making it one of the most effective membranes available for Li+/Mg2+ separation. The insights gained from this study significantly contribute to advancing our understanding of selective ion transport within confined nanospaces and provide valuable design principles for developing highly selective COF membranes.

Hierarchical Spatial Confinement Unlocking the Storage Limit of MoS2 for Flexible High-Energy Supercapacitors

Molybdenum sulfide (MoS2) is a promising electrode material for supercapacitors; however, its limited Mo/S edge sites and intrinsic inert basal plane give rise to sluggish active electronic states, thus constraining its electrochemical performance. Here we propose a hierarchical confinement strategy to develop ethylene molecule (EG)-intercalated Co-doped sulfur-deficient MoS2 (Co-EG/SV-MoS2) for efficient and durable K-ion storage. Theoretical analyses suggest that the intercalation-confined EG and lattice-confined Co can enhance the interfacial K-ion storage capacity while reducing the K-ion diffusion barrier. Experimentally, the intercalated EG molecules with mildly reducing properties induced the creation of sulfur vacancies, expanded the interlayer spacing, regulated the 2H-1T phase transition, and strengthened the structural grafting between layers, thereby facilitating ion diffusion and ensuring structural durability. Moreover, the Co dopants occupying the initial Mo sites initiated charge transfer, thus activating the basal plane. Consequently, the optimized Co-EG/SV-MoS2 electrode exhibited a substantially improved electrochemical performance. Flexible supercapacitors assembled with Co-EG/SV-MoS2 delivered a notable areal energy density of 0.51 mW h cm-2 at 0.84 mW cm-2 with good flexibility. Furthermore, supercapacitor devices were integrated with a strain sensor to create a self-powered system capable of real-time detection of human joint motion.

Ti2NTx quasi-MXene modified polyamide thin film composite reverse osmosis membrane with effective desalination and antifouling performance

In this study, considering the serious problem of lack of fresh water worldwide and the effectiveness of reverse osmosis (RO) membranes in water purification, we prepared improved RO membranes with two-dimensional quasi-MXene nanosheets. In this study, the MAX phase with the chemical formula of Ti2AlN was prepared through the reactive sintering route. Prosperous preparation of the MAX phase with the hexagonal crystalline structure was approved by an X-ray diffraction pattern. Compacted sheets morphology was recognized for the prepared MAX phase from transmittance electron microscopy and scanning electron microscopy micrographs. Then, Ti2NTx quasi-MXene nanosheets were prepared by selective ultrasonic-assisted exfoliation of the MAX phase. Polyamide (PA) thin-layer composite RO membranes with different weight percentages of Ti2NTx quasi-MXene were fabricated by the interfacial polymerization (IP) method. The addition of ultrasonic-assisted prepared quasi-MXene creates numerous and coherent nanochannels on the surface of the membrane. The optimum membrane with 0.01 wt% of quasi-MXene showed the highest pure water flux of 31.9 L m-2. h-1 with an improved salt rejection of 98.2%. Therefore, these nanosheets showed that they can partially solve the trade-off between water permeability and salt rejection, which is a serious challenge in RO membranes. Also, the membranes containing quasi-MXene showed good resistance against fouling by humic acid. This research can be a scalable development in making high-performance membranes.

Ternary Heterostructure Membranes with Two-Dimensional Tunable Channels for Highly Selective Ion Separation

Selective ion separation from brines is pivotal for attaining high-purity lithium, a critical nonrenewable resource. Conventional methods encounter substantial challenges, driving the quest for streamlined, efficient, and swift approaches. Here, we present a graphene oxide (GO)-based ternary heterostructure membrane with a unique design. By utilizing Zn2+-induced confinement synthesis in a two-dimensional (2D) space, we incorporated two-dimensional zeolitic imidazolate framework-8 (ZIF-8) and zinc alginate (ZA) polymers precisely within layers of the GO membrane, creating tunable interlayer channels with a ternary heterostructure. The pivotal design lies in ion insertion into the two-dimensional (2D) membrane layers, achieving meticulous modulation of layer spacing based on ion hydration radius. Notably, the ensuing layer spacing within the hybrid ionic intercalation membrane occupies an intermediary realm, positioned astutely between small-sized hydrated ionic intercalation membrane spacing and their more extensive counterparts. This deliberate configuration accelerates the swift passage of diminutive hydrated ions while simultaneously impeding the movement of bulkier ions within the brine medium. The outcome is remarkable selectivity, demonstrated by the partitioning of K+/Li+ = 20.9, Na+/K+ = 31.2, and Li+/Mg2+ = 9.5 ion pairs. The ZIF-8/GO heterostructure significantly contributes to the selectivity, while the mechanical robustness and stability, improved by the ZA/GO heterostructure, further support its practical applicability. This report reports an advanced membrane design, offering promising prospects for lithium extraction and various ion separation processes.

Response of ionizable block copolymer assemblies to solvent dielectrics: A molecular dynamics study

Ionizable copolymers assembly in solutions is driven by the formation of ionic clusters. Fast clustering of the ionizable blocks often leads to the formation of far-from equilibrium assemblies that ultimately impact the structure of polymer membranes and affect their many applications. Using large-scale atomistic molecular dynamics simulations, we probe the effects of electrostatics on the formation of ionizable copolymer micelles that dominate their solution structure, with the overarching goal of defining the factors that control the assembly of structured ionizable copolymers. A symmetric pentablock ionizable copolymer, with a randomly sulfonated polystyrene center tethered to polyethylene-r-propylene block, terminated by poly(t-butyl styrene), in solvents of varying dielectric constants from 2 to 20, serves as the model system. We find that independent of the solvents, this polymer forms a core-shell micelle with the ionizable segment segregating to the center of the assembly. The specific block conformation, however, strongly depends on the sulfonation levels and the dielectric constant and the polarity of the solvents.

Surface Segregation Methods toward Molecular Separation Membranes

As a highly promising approach to solving the issues of energy and environment, membrane technology has gained increasing attention in various fields including water treatment, liquid separations, and gas separations, owing to its high energy efficiency and eco-friendliness. Surface segregation, a phenomenon widely found in nature, exhibits irreplaceable advantages in membrane fabrication since it is an in situ method for synchronous modification of membrane and pore surfaces during the membrane forming process. Meanwhile, combined with the development of synthesis chemistry and nanomaterial, the group has developed surface segregation as a versatile membrane fabrication method using diverse surface segregation agents. In this review, the recent breakthroughs in surface segregation methods and their applications in membrane fabrication are first briefly introduced. Then, the surface segregation phenomena and the classification of surface segregation agents are discussed. As the major part of this review, the authors focus on surface segregation methods including free surface segregation, forced surface segregation, synergistic surface segregation, and reaction-enhanced surface segregation. The strategies for regulating the physical and chemical microenvironments of membrane and pore surfaces through the surface segregation method are emphasized. The representative applications of surface segregation membranes are presented. Finally, the current challenges and future perspectives are highlighted.

Simultaneous Regulation of Surface Properties and Microstructure of Graphene Oxide Membranes for Enhanced Nanofiltration Performance

The surface properties and microstructure of graphene oxide (GO)-based membranes are both crucial for enhanced nanofiltration performance. Herein, a GO nanofiltration membrane is fabricated with regulatable surface properties and microstructure via a facile two-step impregnation in KOH and following HCl aqueous solutions. The type and number of oxygen-containing groups in GO membranes change with fewer C-O-C/C-OH and C═O but more COOH groups, and they are readily regulated by alkaline treatment time, which enables enhanced surface hydrophilicity and larger surface ζ potentials. Meanwhile, a few tiny defects are present in the GO sheets, which could increase the number of pores and decrease the length of water nanochannels. Such surface properties and microstructure together determine the excellent nanofiltration performance of the GO membranes with fast and selective water permeation, e.g., ∼99.5% rejection toward CBB G250 and flux of 56.9 ± 1.0 L m-2 h-1. This work provides insights into the design of high-performance two-dimensional laminar membranes.

Extreme Ion-Transport Inorganic 2D Membranes for Nanofluidic Applications

Inorganic 2D materials offer a new approach to controlling mass diffusion at the nanoscale. Controlling ion transport in nanofluidics is key to energy conversion, energy storage, water purification, and numerous other applications wherein persistent challenges for efficient separation must be addressed. The recent development of 2D membranes in the emerging field of energy harvesting, water desalination, and proton/Li-ion production in the context of green energy and environmental technology is herein discussed. The fundamental mechanisms, 2D membrane fabrication, and challenges toward practical applications are highlighted. Finally, the fundamental issues of thermodynamics and kinetics are outlined along with potential membrane designs that must be resolved to bridge the gap between lab-scale experiments and production levels.

Parallel Aluminum-Cobalt Oxide Nanosheet Arrays with High-Temperature Ferromagnetism

Parallel nanomaterials possess unique properties and show potential applications in industry. Whereas, vertically aligned 2D nanomaterials have plane orientations that are generally chaotic. Simultaneous control of their growth direction and spatial orientation for parallel nanosheets remains a big challenge. Here, a facile preparation of vertically aligned parallel nanosheet arrays of aluminum-cobalt oxide is reported via a collaborative dealloying and hydrothermal method. The parallel growth of nanosheets is attributed to the lattice-matching among the nanosheets, the buffer layer, and the substrate, which is verified by a careful transmission electron microscopy study. Furthermore, the aluminum-cobalt oxide nanosheets exhibit high-temperature ferromagnetism with a 919 K Curie temperature and a 5.22 emu g-1 saturation magnetization at 300 K, implying the potential applications in high-temperature ferromagnetic fields.

Chitosan-Linked Dual-Sulfonate COF Nanosheet Proton Exchange Membrane with High Robustness and Conductivity

2D materials that can provide long-range ordered channels in thin-film form are highly desirable for proton exchange membranes (PEMs). Covalent organic framework nanosheets (CONs) are promising 2D materials possessing intrinsic porosity and high processability. However, the potential of CONs in PEMs is limited by loose sheet stacking and interfacial grain boundary, which lead to unsatisfied mechanical property and discontinuous conduction pathway. Herein, chitosan (CS), a natural polymer with rich NH2 groups, is designed as the linker of dual-sulfonate CONs (CON-2(SO3 H)) to obtain CON-2(SO3 H)-based membrane. Ultrathin CON-2(SO3 H) with high crystallinity and large lateral size is synthesized at water-octanoic acid interface. The high flexibility of CS chains and their electrostatic interactions with SO3 H groups of CON-2(SO3 H) enable effective connection of CON-2(SO3 H), thus endowing membrane dense structure and exceptional stability. The stacked CON-2(SO3 H) constructs regular hydrophilic nanochannels containing high-density SO3 H groups, and the electrostatic interactions between CON-2(SO3 H) and CS form interfacial acid-base pairs transfer channels. Consequently, CON-2(SO3 H)@CS membrane simultaneously achieves superior proton conductivity of 353 mS cm-1 (under 80 °C hydrated condition) and tensile strength of 95 MPa. This work highlights the advantages of proton-conducting porous CON-2(SO3 H) in advanced PEMs and paves a way in fabricating robust CON-based membranes for various applications.

A Facile Way to Fabricate GO-EDA/Al2O3 Tubular Nanofiltration Membranes with Enhanced Desalination Stability via Fine-Tuning the pH of the Membrane-Forming Suspensions

Pristine graphene oxide (GO)-based membranes have proven promising for molecular and ion separation owing to efficient molecular transport nanochannels, but their separation ability in an aqueous environment is limited by the natural swelling tendency of GO. To obtain a novel membrane with anti-swelling behavior and remarkable desalination capability, we used the Al₂O₃ tubular membrane with an average pore size of 20 nm as the substrate and fabricated several GO nanofiltration ceramic membranes with different interlayer structures and surface charges by fine-tuning the pH of the GO-EDA membrane-forming suspension (pH = 7, 9, 11). The resultant membranes could maintain desalination stability, whether immersed in water for 680 h or operated under a high-pressure environment. When the pH of the membrane-forming suspension was 11, the prepared GE-11 membrane showed a rejection of 91.5% (measured at 5 bar) towards 1 mM Na₂SO₄ after soaking in water for 680 h. An increase in the transmembrane pressure to 20 bar resulted in an increase in the rejection towards the 1 mM Na₂SO₄ solution to 96.3%, and an increase in the permeance to 3.7 L·m^-2·h^-1·bar^-1. The proposed strategy in varying charge repulsion is beneficial to the future development of GO-derived nanofiltration ceramic membranes.

Advanced stimuli-responsive membranes for smart separation

Membranes have been extensively studied and applied in various fields owing to their high energy efficiency and small environmental impact. Further conferring membranes with stimuli responsiveness can allow them to dynamically tune their pore structure and/or surface properties for efficient separation performance. This review summarizes and discusses important developments and achievements in stimuli-responsive membranes. The most commonly utilized stimuli, including light, pH, temperature, ions, and electric and magnetic fields, are discussed in detail. Special attention is given to stimuli-responsive control of membrane pore structure (pore size and porosity/connectivity) and surface properties (wettability, surface topology, and surface charge), from the perspective of determining the appropriate membrane properties and microstructures. This review also focuses on strategies to prepare stimuli-responsive membranes, including blending, casting, polymerization, self-assembly, and electrospinning. Smart applications for separations are also reviewed as well as a discussion of remaining challenges and future prospects in this exciting field. This review offers critical insights for the membrane and broader materials science communities regarding the on-demand and dynamic control of membrane structures and properties. We hope that this review will inspire the design of novel stimuli-responsive membranes to promote sustainable development and make progress toward commercialization.

Rational Design of MXene Hollow Fiber Membranes for Gas Separations

One scalable and facile dip-coating approach was utilized to construct a thin CO₂-selection layer of Pebax/PEGDA-MXene on a hollow fiber PVDF substrate. An interlayer spacing of 3.59 Å was rationally designed and precisely controlled for the MXene stacks in the coated layer, allowing efficient separation of the CO₂ (3.3 Å) from N₂ (3.6 Å) and CH₄ (3.8 Å). In addition, CO₂-philic nanodomains in the separation layer were constructed by grafting PEGDA into MXene interlayers, which enhanced the CO₂ affinity through the MXene interlayers, while non-CO₂-philic nanodomains could promote CO₂ transport due to the low resistance. The membrane could exhibit optimal separation performance with a CO₂ permeance of 765.5 GPU, a CO₂/N₂ selectivity of 54.5, and a CO₂/CH₄ selectivity of 66.2, overcoming the 2008 Robeson upper bounds limitation. Overall, this facile approach endows a precise controlled molecular sieving MXene membrane for superior CO₂ separation, which could be applied for interlayer spacing control of other 2D materials during membrane construction.

The recent advance of precisely designed membranes for sieving

Developing new membranes with both high selectivity and permeability is critical in membrane science since conventional membranes are often limited by the trade-off between selectivity and permeability. In recent years, the emergence of advanced materials with accurate structures at atomic or molecular scale, such as metal organic framework, covalent organic framework, graphene, has accelerated the development of membranes, which benefits the precision of membrane structures. In this review, current state-of-the-art membranes are first reviewed and classified into three different types according to the structures of their building blocks, including laminar structured membranes, framework structured membranes and channel structured membranes, followed by the performance and applications for representative separations (liquid separation and gas separation) of these precisely designed membranes. Last, the challenges and opportunities of these advanced membranes are also discussed.

Charged Boron Nitride Nanosheet Membranes for Improved Organic Solvent Nanofiltration

Two-dimensional nanomaterial-based membranes have earned broad attention because of their excellent capability of separation performance in a mixture that can challenge the conventional membrane materials utilized in the organic solvent nanofiltration (OSN) field. Boron nitride (BN) nanosheet membranes have displayed superb stability and separation ability in aqueous and organic solutions compared to the widely researched analogous graphene-based membranes; nevertheless, the concentration polarization of organic dye pollutants fades their separation performance and eclipses their potential adoption as a feasible technology. Herein, PDDA-modified BN (PBN) and sodium alginate-modified BN (SBN) nanosheet membranes with a thinner laminar structure are facially fabricated to improve the molecule separation performance compared to that of the pristine BN membrane. In aqueous separation application, the SBN membranes (2 μm) can reject positively charged dyes up to 100% and the PBN membrane (2 μm) could reject negatively charged dyes up to 100%. Impressively, the PBN membranes (3 μm) and SBN membranes (3 μm) demonstrate record high performances in OSN, with a permeance of 809 L m^-2 h^-1 bar^-1 and 97.71% rejection to acid fuchsin in acetonitrile and 290 L m^-2 h^-1 bar^-1 and 94.94% rejection to Azure B in dimethyl sulfoxide, respectively. The charged PBN and SBN nanosheet membranes demonstrate stable separation capability, exhibiting their potential for practical water and organic solvent purification processes.

Resonant Nanopumps: ac Gate Voltages in Conical Nanopores Induce Directed Electrolyte Flow

Inducing transport in electrolyte-filled nanopores with dc fields has led to influential applications ranging from nanosensors to DNA sequencing. Here we use the Poisson-Nernst-Planck and Navier-Stokes equations to show that unbiased ac fields can induce comparable directional flows in gated conical nanopores. This flow exclusively occurs at intermediate driving frequencies and hinges on the resonance of two competing timescales, representing space charge development at the ends and in the interior of the pore. We summarize the physics of resonant nanopumping in an analytical model that reproduces the results of numerical simulations. Our findings provide a generic route toward real-time controllable flow patterns, which might find applications in controlling the translocation of small molecules or nanocolloids.

Specific Ion and Electric Field Controlled Diverse Ion Distribution and Electroosmotic Transport in a Polyelectrolyte Brush Grafted Nanochannel

Controlling ion distribution inside a charged nanochannel is central to using such channels in diverse applications. Here, we show the possibility of using a charged polyelectrolyte (PE) brush-grafted nanochannel for triggering diverse nanoscopic ion distribution and nanofluidic electroosmotic transport by controlling the valence and size of the counterions (that screen the charges of the PE brushes) and the strength of an externally applied axial electric field. We atomistically simulate separate cases of fully charged polyacrylic acid (PAA) brush functionalized nanochannels with Na⁺, Cs⁺, Ca²⁺, Ba²⁺, and Y³⁺ counterions screening the PE charges. Four key findings emerge from our simulations. First, we find that the counterions with a greater valence and a smaller size prefer to remain localized inside the brush layer. Second, for the case where there is an added chloride salt with the same cation (as the screening counterions), there are more coions (Cl^- ions) in the brush-free bulk than counterions (for counterions Na⁺, Ca²⁺, Ba²⁺, Y³⁺): this is a manifestation of the overscreening (OS) of the PE brush layer. Contrastingly, the number of Cs⁺ ions remain higher than the Cl^- ions inside the brush-free bulk, ensuring that there is no OS effect for this case. Third, large applied electric field enables a few Na⁺, Cs⁺, and Ba²⁺ counterions to leave the brush layer and to go to the bulk: this makes the OS of the PE brush layer disappear for the cases of PE brushes being screened by the Na⁺ and Ba²⁺ ions. On the other hand, no such electric-field-mediated disappearance of OS is observed for the cases of Ca²⁺ and Y³⁺ screening counterions; we attribute this to the firm attachment of these counterions to the negatively charged monomers. Free energy associated with a counterion binding to a PE chain corroborates this diversity in the counterion-specific response to the applied electric field. Finally, we demonstrate that such diverse ion distributions, along with specific electric-field-strength-dependent ion properties, lead to (1) electroosmotic (EOS) transport in nanochannels grafted with PAA brushes screened with Cs⁺ ions to be always counterion dominated, (2) EOS transport in nanochannels grafted with PAA brushes screened with Ca²⁺ and Y³⁺ ions to be always coion-dominated, and (3) EOS transport in nanochannels grafted with PAA brushes screened with Na⁺ and Ba²⁺ ions to be coion dominated for smaller electric fields and counterion dominated for larger electric fields.

Metal Confined in 2D Membranes for Molecular Recognition and Sieving towards Ethylene/Ethane Separation

Membranes with nanochannels have exhibited great potential in molecular separations, while it remains a great challenge to separate molecules with very close physical properties and kinetic diameters (e.g., ethylene/ethane) owing to the lack of size-sieving property and specific affinity. Herein, a metal confined 2D sub-nanometer channel is reported to successfully discriminate ethylene over ethane via molecular recognition and sieving. Transition metal cations are paired with polyelectrolyte anions to achieve high dissociation activity, forming reversible complexation with ethylene. Aberration-corrected transmission electron microscopy observes that the metals with size of ≈2 nm are uniformly confined in graphene oxide (GO) interlayer channels with average height of ≈0.44 nm, thereby cooperating the size-sieving effect with a molecular recognition ability toward ethylene and stimulating its selective transport over ethane. The resulting ultrathin (≈60 nm) membrane exhibits superior ethylene/ethane separation performance far beyond the polymeric upper-bound. Density functional theory (DFT) and molecular dynamic simulations reveal that the metal@2D interlayer channel provides a molecular recognition pathway for selective gas transport. The proposed metal confined in 2D channel with molecular recognition and sieving properties would have broad application in other related fields such as single-atom catalysis, sensor and energy conversion.

Advances in two-dimensional materials for energy-efficient and molecular precise membranes for biohydrogen production

Waste management has become an ever-increasing global issue due to population growth and rapid globalisation. For similar reasons, the greenhouse effect caused by fossil fuel combustion, is leading to chronic climate change issues. A novel approach, the waste-to-hydrogen process, is introduced to address the concern of waste generation and climate change with an additional merit of production of a renewable, higher energy density than fossil fuels and sustainable transportation fuel, hydrogen (H2) gas. In the downstream H2 purifying process, membrane separation is one of the appealing options for the waste-to-hydrogen process given its low energy consumption and low operational cost. However, commercial polymeric membranes have hindered membrane separation process due to their low separation performance. By introducing novel two-dimensional materials as substitutes, the limitation of purifying using conventional membranes can potentially be solved. Herein, this article provides a comprehensive review of two-dimensional materials as alternatives to membrane technology for the gas separation of H2 in waste-to-hydrogen downstream process. Moreover, this review article elaborates and provides some perspectives on the challenges and future potential of the waste-to-hydrogen process and the use of two-dimensional materials in membrane technology.

Facile Ionization of the Nanochannels of Lamellar Membranes for Stable Ionic Liquid Immobilization and Efficient CO2 Separation

Two-dimensional (2D) lamellar membranes, with highly ordered nanochannels between the adjacent layers, have revealed potential application prospects in various fields. To separate gases with similar kinetic diameters, intercalation of a functional liquid, especially an ionic liquid (IL), into 2D lamellar membranes is proved to be an efficient method due to the capacity of imparting solubility-based separation and sealing undesired defects. Stable immobilization of a high content of liquid is challenging but extremely required to achieve and maintain high separation performance. Herein, we describe the intercalation of a typical IL, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), into the ionized nanochannels of sulfonated MXene lamellar membranes, where the sulfonate groups are anchored onto MXene nanosheets through a facile method based on metal-catechol chelating chemistry. Thanks to the intrinsic benefits of MXene as building blocks and the decorated sulfonate groups, the optimal membrane possesses adequate interlayer spacing (∼1.8 nm) and high IL uptake (∼47 wt %) and therefore presents a CO₂ permeance of 519 GPU and a CO₂/N₂ selectivity of 210, outperforming the previously reported liquid-immobilized lamellar membranes. Moreover, the IL loss rate of the membrane within 7 days at elevated pressure (5 bar) is measured to be significantly decreased (from 43.2 to 9.0 wt %) after growing sulfonate groups on the nanochannel walls, demonstrating the excellent IL storage stability.

Tuneable molecular selective boron nitride nanosheet ultrafiltration lamellar membrane for dye exclusion to remediate the environment

Smart tuning of the membrane's porous nanostructures offers an effective strategy for creating state-of-the-art, high-performance separation membranes. In aqueous solution, polyethylene glycol (PEG) grafted boron nitride PEG_X-g-(f-BN) nanosheets exhibit high permeance and excellent molecular sieving. The molecular selectivity of the PEG_X-g-(f-BN) lamellar membrane is controlled by the nanopores, which can be tuned by modulating the interplanar spacing between the nanosheets. Herein, the interplanar spacing of h-BN nanosheets is enhanced in the range of 0.334-0.348 nm through grafting different molecular weight PEG. Moreover, the grafted PEG instigates a synergistic effect on the nanosheets in two ways. Firstly, through PEG intercalation, the interlayer spacing of the (002) plane could be adjusted without significant deterioration to the hexagonal crystallographic structure. Secondly, intercalated PEG in BN nanosheets reflects in terms of improved h-BN wettability through transformation to hydrophilic surface characteristics (small contact angle of 36-39°). The fabricated PEG_X-g-(f-BN) lamellar membrane acquires stable and interconnected nanopores and nanochannels with an average pore diameter of 1.36-2.19 nm. Permeance-exclusion trade-off manipulation through methodical approaches of PEG_X-g-(f-BN) decoration thickness and interplanar spacing is exploited to build a better understanding of water transport behavior. PEG_X-g-(f-BN) lamellar membranes show unprecedented permeance of ∼1253 L m^-2 h^-1 bar^-1 with a steady methyl blue (MB) exclusion of 98.9% even in different pH conditions.