Self-grafting copper oxide nanoparticles show a strong enhancement of their anti-algal and anti-yeast action

Innovative CuO-melanin hybrid nanoparticles and polytetrafluoroethylene for enhanced antifouling coatings

Based on current research, a highly effective, completely biocompatible, and eco-friendly antifouling method was developed. Sepia pharaonis was used to synthesize melanin nanoparticles from its ink. To improve the anti-biofouling characteristics, CuO nanoparticles were synthesized from Padina sp., and a CuO-melanin hybrid nanoparticle complex was created under reflux. The XRD spectrum of the hybrid nanoparticles revealed several prominent peaks, indicating the crystalline structure of the nanoparticles. An EDS analysis identified copper, carbon, and oxygen in the hybrid nanoparticles. According to FE-SEM analysis, CuO-melanin hybrid nanoparticles displayed spherical morphology, with sizes ranging from 15 nm to 55 nm. DLS analysis showed that the hydrodynamic diameter of CuO-melanin hybrid nanoparticles was 187.5 nm. The biological test showed that CuO-melanin nanoparticles had the highst effect on marine bacteria (Phaeobacter sp. (6.25 μg/mL), Alteromonas sp. (12.5 μg/mL)), and algae (Isochrysis galbana Parke) (99 %) after 48 h. The CuO-melanin (3 wt%) exhibited the lowest pseudo-barnacle adhesion strength at 0.021 MPa and the lowest surface free energy, measuring 14.22 mN/m. The field immersion study in a marine environment showed that among the panels tested, the one containing 3 wt% CuO-melanin hybrid nanoparticles with polytetrafluoroethylene yielded the most favorable and efficient outcome, since it led to the lowest measured weight of biofouling at 26.44 g. The findings of this study show that CuO-melanin hybrid nanoparticles combined with polytetrafluoroethylene exhibit highly promising characteristics, make them appealing for antifouling applications.

Synthesis, Characterization and Application of Advanced Antimicrobial Electrospun Polymers

The aim of this work was to synthesize, characterize and apply advanced antimicrobial biocompatible electrospun polymers suitable for medical implants for surgical repairs. Injuries to the musculoskeletal system often necessitate surgical repair, but current treatments can still lead to high failure rates, such as 40% for the repair of rotator cuff tears. Therefore, there is an urgent need for the development of new biocompatible materials that can effectively support the repair of damaged tissues. Additionally, infections acquired during hospitalization, particularly those caused by antibiotic-resistant bacteria, result in more fatalities than AIDS, tuberculosis, and viral hepatitis combined. This underscores the critical necessity for the advancement of antimicrobial implants with specialized coatings capable of combating Methicillin-resistant Staphylococcus aureus (MRSA) and Methicillin-sensitive Staphylococcus aureus (MSSA), two strains notoriously known for their antibiotic resistance. Therefore, we developed an antimicrobial coating incorporating nanoparticle mixtures using the sol-gel process and applied it to electrospun polycaprolactone (PCL) filaments, followed by thorough characterization by using spectroscopic (FTIR, Raman, NMR) microscopic (SEM and SEM-EDX), and tensile test. The results have shown that the integration of electro-spinning technology for yarn production, coupled with surface modification techniques, holds significant potential for creating antimicrobial materials suitable for medical implants for surgical repairs.

High-performance photocatalytic degradation and antifungal activity of chromium-doped nickel oxide nanoparticles

The elimination of pollutants such as dyes and fungi has become a tedious process hence there is a need for multifunctional materials that can be used for the removal or degradation of various pollutants from wastewater. Here, a nickel oxide nanoparticle (NiONPs) was synthesized by the co-precipitation method. In the current study, a composite of nickel oxide nanoparticles (NiONPs) was synthesized using nitrogen and chromium as dopants to create (N/NiONPs) and (Cr/N/NiONPs), respectively and used for the removal of dyes and fungi. The synthesized nanocomposites were characterized using zeta potential (ZP), scanning electron microscopy (SEM), X-rays diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The NiONPs, N/NiONPs and Cr/N/NiONPs were tested for the degradation of two dye pollutants, Reactive blue 13 (RB13) and eosin dye. The obtained results showed that Cr/N/NiONPs were more efficient than NiONPs and N/NiONPs for dye degradation by applying the same irradiation conditions. The Cr/N/NiONPs nanocomposites showed very good degradation efficiency of dye up to 94.2% for the RB13 and 90.8% for the eosin. We also examined the antifungal action of the NiONPs, N/NiONPs and Cr/N/NiONPs against Trichoderma fungus. The results showed that the Cr/N/NiONPs have an extremely strong antifungal impact on Trichoderma. This could be explained by the strong adhesion of Cr/N/NiONPs to the Trichoderma surface due to electrostatic attraction. This work has demonstrated that it is possible to create environmentally safe materials that can be used for the degradation of different dyes and the improvement of more effective antifungal treatments with lower active agent doses for fungus control with potential big economic benefits.

Hydrogen peroxide modified and bismuth vanadate decorated titanium dioxide nanocomposite (BiVO4@HMT) for enhanced visible light photocatalytic growth inhibition of harmful cyanobacteria in water

The persistence of harmful cyanobacterial algal blooms in aquatic ecosystems leads to health damage for various life forms. In this study, a photocatalyst active in the visible light range was prepared by combining BiVO4 with hydrogen peroxide modified titanium dioxide (BiVO4@HMT; for short), using an impregnation method. The catalyst was used to photocatalytically inhibit the growth of cyanobacteria collected from a bloom site. To infer the optimum pH for cyanobacterial growth, the effect of pH was studied. The growth of cyanobacteria was favoured in an alkaline environment at pH values in the range of 8-9.5 when analysed on the 20th day of incubation. Structural and chemical analysis of pristine and composite nano-powders was performed using XRD, SEM, TEM and XPS, confirming the heterojunction formation, while optical and band gap analysis revealed increased visible light absorption and reduced band gap of the composite. A small strawberry seed-like assembly of BiVO4 particles increased the light absorption in the 15%BiVO4@HMT composite and increased the inhibition efficiency up to 2.56 times compared to pristine HMT at an exposure time of 6 h and cell concentration at 0.1 g L-1 with an optimum catalyst dose of 1 g L-1. The amount of chlorophyll 'a' decreased due to the generation of catalytically reactive species, especially holes (h+), which caused oxidative damage to the cell wall, cell membrane and antioxidants in algal cells. This study reports that visible light active nanocatalysts can be used as a promising method for reducing algal blooms in water bodies.

Emerging nanotechnologies for targeting antimicrobial resistance

Antimicrobial resistance is a leading cause of mortality worldwide. Without newly approved antibiotics and antifungals being brought to the market, resistance is being developed to the ones currently available to clinicians. The reason is the applied evolutionary pressure to bacterial and fungal species due to the wide overuse of common antibiotics and antifungals in clinical practice and agriculture. Biofilms harbour antimicrobial-resistant subpopulations, which make their antimicrobial treatment even more challenging. Nanoparticle-based technologies have recently been shown to successfully overcome antimicrobial resistance in both planktonic and biofilms phenotypes. This results from the combination of novel nanomaterial research and classic antimicrobial therapies which promise to deliver a whole new generation of high-performance active nanocarrier systems. This review discusses the latest developments of promising nanotechnologies with applications against resistant pathogens and evaluates their potential and feasibility for use in novel antimicrobial therapies.

Enhanced clearing of Candida biofilms on a 3D urothelial cell in vitro model using lysozyme-functionalized fluconazole-loaded shellac nanoparticles

Candida urinary tract biofilms are increasingly witnessed in nosocomial infections due to reduced immunity of patients and the hospital ecosystem. The indwelling devices utilized to support patients with urethral diseases that connect the unsterilized external environment with the internal environment of the patient are another significant source of urinary tract biofilm infections. Recently, nanoparticle (NP)-associated therapeutics have gained traction in a number of areas, including fighting antibiotic-resistant bacterial biofilm infection. However, most studies on nanotherapeutic delivery have only been carried out in laboratory settings rather than in clinical trials due to the lack of precise in vitro and in vivo models for testing their efficiency. Here we develop a novel biofilm-infected 3D human urothelial cell culture model to test the efficiency of nanoparticle (NP)-based antifungal therapeutics. The NPs were designed based on shellac cores, loaded with fluconazole and coated with the cationic enzyme lysozyme. Our formulation of 0.2 wt% lysozyme-coated 0.02 wt% fluconazole-loaded 0.2 wt% shellac NPs, sterically stabilised by 0.25 wt% poloxamer 407, showed an enhanced efficiency in removing Candida albicans biofilms formed on 3D layer of urothelial cell clusteroids. The NP formulation exhibited low toxicity to urothelial cells. This study provides a reliable in vitro model for Candida urinary tract biofilm infections, which could potentially replace animal models in the testing of such antifungal nanotechnologies. The reproducibility and availability of a well-defined biofilm-infected 3D urothelial cell culture model give valuable insights into the formation and clearing of fungal biofilms and could accelerate the clinical use of antifungal nanotherapeutics.

Enhanced Antimicrobial Action of Chlorhexidine Loaded in Shellac Nanoparticles with Cationic Surface Functionality

We report on an active nanocarrier for chlorhexidine (CHX) based on sterically stabilized shellac nanoparticles (NPs) with dual surface functionalization, which greatly enhances the antimicrobial action of CHX. The fabrication process for the CHX nanocarrier is based on pH-induced co-precipitation of CHX-DG from an aqueous solution of ammonium shellac and Poloxamer 407 (P407), which serves as a steric stabilizing agent. This is followed by further surface modification with octadecyl trimethyl ammonium bromide (ODTAB) through a solvent change to yield cationic surface functionality. In this study, we assessed the encapsulation efficiency and release kinetics of the novel nanocarrier for CHX. We further examined the antimicrobial effects of the CHX nanocarriers and their individual components in order to gain better insight into how they work, to improve their design and to explore the impacts of their dual functionalization. The antimicrobial actions of CHX loaded in shellac NPs were examined on three different proxy microorganisms: a Gram-negative bacterium (E. coli), a yeast (S. cerevisiae) and a microalgae (C. reinhardtii). The antimicrobial actions of free CHX and CHX-loaded shellac NPs were compared over the same CHX concentration range. We found that the non-coated shellac NPs loaded with CHX showed inferior action compared with free CHX due to their negative surface charge; however, the ODTAB-coated, CHX-loaded shellac NPs strongly amplified the antimicrobial action of the CHX for the tested microorganisms. The enhancement of the CHX antimicrobial action was thought to be due to the increased electrostatic adhesion between the cationic surface of the ODTAB-coated, CHX-loaded shellac NPs and the anionic surface of the cell walls of the microorganisms, ensuring direct delivery of CHX with a high concentration locally on the cell membrane. The novel CHX nanocarriers with enhanced antimicrobial action may potentially find applications in dentistry for the development of more efficient formulations against conditions such as gingivitis, periodontitis and other oral infections, as well as enabling formulations to have lower CHX concentrations.

Enhanced Antimould Action of Surface Modified Copper Oxide Nanoparticles with Phenylboronic Acid Surface Functionality

Antimould agents are widely used in different applications, such as specialty paints, building materials, wood preservation and crop protection. However, many antimould agents can be toxic to the environment. This work aims to evaluate the application of copper oxide nanoparticles (CuONPs) surface modified with boronic acid (BA) terminal groups as antimould agents. We developed CuONPs grafted with (3-glycidyloxypropyl) trimethoxysilane (GLYMO), coupled with 4-hydroxyphenylboronic acid (4-HPBA), which provided a strong boost of their action as antimould agents. We studied the antimould action of the 4-HPBA-functionalized CuONPs against two mould species: Aspergillus niger (A. niger) and Penicillium chrysogenum (P. chrysogenum). The cis-diol groups of polysaccharides expressed on the mould cell walls can form reversible covalent bonds with the BA groups attached on the CuONPs surface. This allowed them to bind strongly to the mould surface, resulting in a very substantial boost of their antimould activity, which is not based on electrostatic adhesion, as in the case of bare CuONPs. The impact of these BA-surface functionalized nanoparticles was studied by measuring the growth of the mould colonies versus time. The BA-functionalized CuONPs showed significant antimould action, compared to the untreated mould sample at the same conditions and period of time. These results can be applied for the development of more efficient antimould treatments at a lower concentration of active agent with potentially substantial economic and environmental benefits.

Harmful effects of metal(loid) oxide nanoparticles

The incorporation of nanomaterials (NMs), including metal(loid) oxide (MOx) nanoparticles (NPs), in the most diversified consumer products, has grown enormously in recent decades. Consequently, the contact between humans and these materials increased, as well as their presence in the environment. This fact has raised concerns and uncertainties about the possible risks of NMs to human health and the adverse effects on the environment. These concerns underline the need and importance of assessing its nanosecurity. The present review focuses on the main mechanisms underlying the MOx NPs toxicity, illustrated with different biological models: release of toxic ions, cellular uptake of NPs, oxidative stress, shading effect on photosynthetic microorganisms, physical restrain and damage of cell wall. Additionally, the biological models used to evaluate the potential hazardous of nanomaterials are briefly presented, with particular emphasis on the yeast Saccharomyces cerevisiae, as an alternative model in nanotoxicology. An overview containing recent scientific advances on cellular responses (toxic symptoms exhibited by yeasts) resulting from the interaction with MOx NPs (inhibition of cell proliferation, cell wall damage, alteration of function and morphology of organelles, presence of oxidative stress bio-indicators, gene expression changes, genotoxicity and cell dead) is critically presented. The elucidation of the toxic modes of action of MOx NPs in yeast cells can be very useful in providing additional clues about the impact of NPs on the physiology and metabolism of the eukaryotic cell. Current and future trends of MOx NPs toxicity, regarding their possible impacts on the environment and human health, are discussed. KEY POINTS: • The potential hazardous effects of MOx NPs are critically reviewed. • An overview of the main mechanisms associated with MOx NPs toxicity is presented. • Scientific advances about yeast cell responses to MOx NPs are updated and discussed.

Toxicity of polyelectrolyte-functionalized titania nanoparticles in zebrafish (Danio rerio) embryos

We investigated the effects of short-term exposure of bare TiO2NPs and polyelectrolyte-coated TiO2NPs in the 5–25 nm size range, at relatively high concentrations (of 500 and 1000 mg/L) under light or dark conditions, in D. rerio embryos. The biological endpoints investigated included embryo viability and mRNA transcript levels of antioxidant and membrane transport genes relative to control embryos. The presence of nanoparticles on the surface of embryos was assessed using TEM. The results confirm an accumulation of TiO2NPs on the outer surface (chorion) of the embryo, but not within the embryo. No significant difference in embryo viability was detected following each exposure regime. The expression of antioxidant biomarker, SOD2, was significantly impacted by the type of TiO2NP, with TiO2NPs/PSS/PAH coating exposure showing down regulation; the concentration of the nanoparticles, with down regulation at 500 mg/L; and dark/light condition with down regulation in the light. The expression levels of the hypoxia and membrane markers, HIF1 and Pxmp2, were not significantly impacted by any factor. The study indicates that SOD2 mRNA expression levels may be useful in the detection of apparent oxidative stress induced by the titania nanoparticle build up on the embryo chorion surface.

Enhanced Clearing of Wound-Related Pathogenic Bacterial Biofilms Using Protease-Functionalized Antibiotic Nanocarriers

Biofilms are prevalent in chronic wounds and once formed are very hard to remove, which is associated with poor outcomes and high mortality rates. Biofilms are comprised of surface-attached bacteria embedded in an extracellular polymeric substance (EPS) matrix, which confers increased antibiotic resistance and host immune evasion. Therefore, disruption of this matrix is essential to tackle the biofilm-embedded bacteria. Here, we propose a novel nanotechnology to do this, based on protease-functionalized nanogel carriers of antibiotics. Such active antibiotic nanocarriers, surface coated with the protease Alcalase 2.4 L FG, "digest" their way through the biofilm EPS matrix, reach the buried bacteria, and deliver a high dose of antibiotic directly on their cell walls, which overwhelms their defenses. We demonstrated their effectiveness against six wound biofilm-forming bacteria, Staphylococcus aureus, Pseudomonas aeruginosa, Staphylococcus epidermidis, Klebsiella pneumoniae, Escherichia coli, and Enterococcus faecalis. We confirmed a 6-fold decrease in the biofilm mass and a substantial reduction in bacterial cell density using fluorescence, atomic force, and scanning electron microscopy. Additionally, we showed that co-treatments of ciprofloxacin and Alcalase-coated Carbopol nanogels led to a 3-log reduction in viable biofilm-forming cells when compared to ciprofloxacin treatments alone. Encapsulating an equivalent concentration of ciprofloxacin into the Alcalase-coated nanogel particles boosted their antibacterial effect much further, reducing the bacterial cell viability to below detectable amounts after 6 h of treatment. The Alcalase-coated nanogel particles were noncytotoxic to human adult keratinocyte cells (HaCaT), inducing a very low apoptotic response in these cells. Overall, we demonstrated that the Alcalase-coated nanogels loaded with a cationic antibiotic elicit very strong biofilm-clearing effects against wound-associated biofilm-forming pathogenic bacteria. This nanotechnology approach has the potential to become a very powerful treatment of chronically infected wounds with biofilm-forming bacteria.

"Ghost" Silica Nanoparticles of "Host"-Inherited Antibacterial Action

We fabricated surface-rough mesoporous silica nanoparticles ("ghost" SiO₂NPs) by using composite mesoporous copper oxide nanoparticles ("host" CuONPs) as templates, which allowed us to mimic their surface morphology. The "host" CuONPs used here as templates, however, had a very high antibacterial effect, with or without functionalization. To evaluate the surface roughness effect on the "ghost" SiO₂NPs antibacterial action, we functionalized them with (3-glycidyloxypropyl)trimethoxysilane (GLYMO) to permit additional covalent coupling of 4-hydroxyphenylboronic acid (4-HPBA). The diol groups on the bacterial membrane can form reversible covalent bonds with boronic acid (BA) groups on the "ghost" SiO₂NPs surface and bind to the bacteria, resulting in a very strong amplification of their antibacterial activity, which does not depend on electrostatic adhesion. The BA-functionalized "ghost" SiO₂NPs showed a very significant antibacterial effect as compared to smooth SiO₂NPs of the same surface coating and particle size. We attribute this to the "ghost" SiO₂NPs mesoporous surface morphology, which mimics to a certain extent those of the original mesoporous CuONPs used as templates for their preparation. We envisage that the "ghost" SiO₂NPs effectively acquire some of the antibacterial properties from the "host" CuONPs, with the same functionality, despite being completely free of copper. The antibacterial effect of the functionalized "ghost" SiO₂NPs/GLYMO/4-HPBA on Rhodococcus rhodochrous (R. rhodochrous) and Escherichia coli (E. coli) is much higher than that of the nonfunctionalized "ghost" SiO₂NPs or the "ghost" SiO₂NPs/GLYMO. The results indicate that the combination of rough surface morphology and strong adhesion of the particle surface to the bacteria can make even benign material such as silica act as a strong antimicrobial agent. Additionally, our BA-functionalized nanoparticles ("ghost" SiO₂NPs/GLYMO/4-HPBA) showed no detectable cytotoxic impact against human keratinocytes at particle concentrations, which are effective against bacteria.

Controlling the Antimicrobial Action of Surface Modified Magnesium Hydroxide Nanoparticles

Magnesium hydroxide nanoparticles (Mg(OH)2NPs) have recently attracted significant attention due to their wide applications as environmentally friendly antimicrobial nanomaterials, with potentially low toxicity and low fabrication cost. Here, we describe the synthesis and characterisation of a range of surface modified Mg(OH)2NPs, including particle size distribution, crystallite size, zeta potential, isoelectric point, X-ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). We explored the antimicrobial activity of the modified Mg(OH)2NPs on the microalgae (C. reinhardtii), yeast (S. cerevisiae) and Escherichia coli (E. coli). The viability of these cells was evaluated for various concentrations and exposure times with Mg(OH)2NPs. It was discovered that the antimicrobial activity of the uncoated Mg(OH)2NPs on the viability of C. reinhardtii occurred at considerably lower particle concentrations than for S. cerevisiae and E. coli. Our results indicate that the antimicrobial activity of polyelectrolyte-coated Mg(OH)2NPs alternates with their surface charge. The anionic nanoparticles (Mg(OH)2NPs/PSS) have much lower antibacterial activity than the cationic ones (Mg(OH)2NPs/PSS/PAH and uncoated Mg(OH)2NPs). These findings could be explained by the lower adhesion of the Mg(OH)2NPs/PSS to the cell wall, because of electrostatic repulsion and the enhanced particle-cell adhesion due to electrostatic attraction in the case of cationic Mg(OH)2NPs. The results can be potentially applied to control the cytotoxicity and the antimicrobial activity of other inorganic nanoparticles.