Rod-shaped liquid plasticine for gas diffusion detection

A Simple Route for Open Fluidic Devices with Particle Walls

Open fluidics, allowing liquid in a flow channel to interact with the external environment, is a revolutionary concept. However, fabricating a highly stable open fluidic device of arbitrary complexity, while maintaining reconfigurability, is still a challenge. This is achieved by the use of a patterned substrate and liquids that are covered with functional, readily available hydrophobic particles, providing great flexibility in the construction and use of open fluidic structures. Decorated with a coating of modified carbon nanotubes (CNTs) to encapsulate the fluids, the study capitalizes on the photothermal characteristics of CNTs to fabricate a device to probe the effects of temperature on tumor chemotherapy. The strategy substantially increases the availability and potential use of open fluidic devices.

Non-Aqueous Polyhedral Liquid Marbles Stabilized with Polymer Plates Having Surface Roughness

Hydrophobic polymer plates with smooth and rough surfaces are used as a stabilizer for cubic liquid marbles (LMs) to study the effect of surface roughness on their formation. The smooth and rough polymer plates can stabilize LMs using liquids with surface tensions of 72.8-26.6 and 72.8-22.9 mN m-1, respectively. It is clarified that the higher the surface roughness, the lower the surface tension of the liquids are stabilized to form the LMs. These results indicated that the introduction of surface roughness improves the hydrophobicity of the polymer plates and the rough polymer plates can stabilize LMs using liquids with a wider surface tension range. Electron microscopy studies and numerical analyses confirmed that the LMs can be formed, when the Cassie-Baxter wetting state, where θY>90° (θY: the contact angle on smooth surfaces) and θR>90° (θR: the contact angle on rough surfaces), and the metastable Cassie-Baxter wetting state, where θY<90° and θR>90°, are realized. Finally, the synthesis of cubic polymer particles are succeeded by free radical polymerization of the cubic LMs containing a hydrophobic vinyl monomer (dodecyl acrylate) in a solvent-free manner.

pH- and Photoresponsive Liquid Plasticine

Liquid marbles (LMs) can be prepared by adsorption of hydrophobic particles at the air-liquid interface of a water droplet. LMs have been studied for their application as microreaction vessels. However, their opaqueness poses challenges for internal observation. Liquid plasticines (LPs), akin to LMs, can be prepared by the adsorption of hydrophobic particles with a diameter of 50 nm or less, at the air-liquid interface of a water droplet. Unlike LMs, LPs are transparent, allowing for internal observation, thus presenting promising applications as reactors and culture vessels on a microliter scale. In this study, the surface of silica particles, approximately 20 nm in diameter, was rendered hydrophobic to prepare hydrophobic silica particles (SD0). A small amount of poly(2-(diisopropylamino)ethyl methacrylate) (PDPA) was then grafted onto the surface of SD0, yielding SD1. SD0 particles exhibited consistent hydrophobicity irrespective of the environmental pH atmosphere. Under acidic conditions, SD1 became hydrophilic due to the protonation of pendant tertiary amines in the grafted PDPA chains. However, SD1 alone was unsuitable for LP preparation due to its high surface wettability regardless of atmospheric pH, attributable to the presence of PDPA-grafted chains. Therefore, to prepare pH-responsive LP, SD1 and SD0 were mixed (SD1/SD0 = 3/7). Upon exposure to HCl gas, these LPs ruptured, with the leaked water from the LPs being absorbed by adjacent paper. Moreover, clear LPs, prepared using an aqueous solution containing a water-soluble photoacid generator (PAG), disintegrated upon exposure to light as PAG generated acid, leading to LP breakdown. In summary, pH-responsive LPs, capable of disintegration under acidic conditions and upon light irradiation, were successfully prepared in this study.

Rod-Shaped Liquid Plasticine as Cuttable Minireactor for Photodynamic Therapy of Tumors

Photodynamic therapy (PDT) has emerged as a promising non-invasive approach for cancer treatment. Enhancing its efficacy and understanding its absorption-induced attenuation are significant while the solutions are limited, particularly for the latter. In this study, a rod-shaped liquid plasticine (LP), comprised of a tumor cell solution encased by a nanoparticle monolayer, is used to serve as a powerful minireactor for addressing these issues. The channel structure, openness, and cuttability of the LP reactor are exploited for providing benefits to PDT. The resulting PDT efficacy is several times higher than those from droplet reactors with common spherical shapes. The attenuation law, which is fundamental in PDT yet poorly understood due to the lack of experimental approaches, is preliminarily uncovered here from the perspective of in vitro experiments by using the LP's cuttability, affording quantitative understanding on this difficult subject. These findings provide insights into the widely-concerned topics in PDT, and highlight the great potential of an LP reactor in offering innovation power for the biochemical and biomedical arenas.

Preparation of Oriented Superhydrophobic Surface to Reduce Agglomeration in Preparing Melt Marbles

Numerous innovative granulation techniques utilizing the concept of liquid marbles have been proposed before. However, these processes frequently encounter issues such as collisions, aggregation, and fragmentation of liquid/melt marble during the granulation process. In this study, the oriented superhydrophobic surface (OSS) was successfully prepared by utilizing copper wire to solve the above problem, facilitating efficient batch production and guided transportation of uniform marbles. The parameters and mechanisms of this process were thoroughly studied. The optimized structure is that the copper wire spacing (d) and height (h) are set as 1.0 and 0.1 mm, respectively. This resulted in a surface contact angle (CA) of 156° and anisotropic sliding (ΔSA) of 16.3 ± 1.34°. Using the prepared substrate, high-quality urea products were successfully obtained through the controlled transport of urea melt marbles. The mechanism of guided and directional drag reduction, based on the solid/solid contact on the surface, is proposed. These findings in this study have significant implications for improving granulation processes.

Open millifluidics based on powder-encased channels

Millifluidics, the manipulation of liquid flow in millimeter-sized channels, has been a revolutionary concept in chemical processing and engineering. The solid channels that contain the liquids, though, are not flexible in their design and modification, and prevent contact with the external environment. All-liquid constructs, on the other hand, while flexible and open, are imbedded in a liquid environment. Here, we provide a route to circumvent these limitations by encasing the liquids in a hydrophobic powder in air that jams on the surface, containing and isolating flowing fluids, offering flexibility and adaptability in design, as manifest in the ability to reconfigure, graft, and segment the constructs. Along with the open nature of these powder-contained channels that allow arbitrary connections/disconnections and substance addition/extraction, numerous applications can be opened in the biological, chemical, and material arenas.

Machining water through laser cutting of nanoparticle-encased water pancakes

Due to the inherent disorder and fluidity of water, precise machining of water through laser cutting are challenging. Herein we report a strategy that realizes the laser cutting machining of water through constructing hydrophobic silica nanoparticle-encased water pancakes with sub-millimeter depth. Through theoretical analysis, numerical simulation, and experimental studies, the developed process of nanoparticle-encased water pancake laser cutting and the parameters that affect cutting accuracy are verified and elucidated. We demonstrate that laser-fabricated water patterns can form diverse self-supporting chips (SSCs) with openness, transparency, breathability, liquid morphology, and liquid flow control properties. Applications of laser-fabricated SSCs to various fields, including chemical synthesis, biochemical sensing, liquid metal manipulation, patterned hydrogel synthesis, and drug screening, are also conceptually demonstrated. This work provides a strategy for precisely machining water using laser cutting, addressing existing laser machining challenges and holding significance for widespread fields involving fluid patterning and flow control in biological, chemical, materials and biomedical research.

Liquid Plasticine-Based Electrokinetic Enrichment of Proteins

Protein analysis is an important approach for disease diagnosis, in which sample pretreatment is an essential step since protein samples are often complex and many protein biomarkers are of low abundance. Here, given the good openness and light transmission of liquid plasticine (LP), which is a liquid entity formed by SiO₂ nanoparticles and encapsulated aqueous solution, we developed a LP-based field-amplified sample stacking (FASS) system for protein enrichment. The system was composed of a LP container, a sample solution and a Tris-HCl solution containing hydroxyethyl cellulose (HEC). The system design, mechanism investigation, optimization of experimental parameters and characterization of LP-FASS performance for protein enrichment were well studied. Under the optimized experimental conditions of 1 % HEC, 100 mm Tris-HCl and 100 V in the LP-FASS system, a 40-80 times enrichment of proteins was obtained in 40 min using bovine hemoglobin (BHb) as the model protein using the constructed LP-FASS system. The simultaneous enrichment of multiple proteins (phycocyanin, BHb and cytochrome C) was also realized using the system. The LP-FASS system can serve as a new platform for protein enrichment which is easy to be combined with online and offline detections.

Liquid Marbles under Electric Fields: New Capabilities for Non-wetting Droplet Manipulation and Beyond

The study of liquid marbles (LMs) composed of stabilizing liquid droplets with solid particles in a gaseous environment has matured into an established area in surface and colloid science. The minimized "solid-liquid-air" triphase interface enables LMs to drastically reduce adhesion to a solid substrate, making them unique non-wetting droplets transportable with limited energy. The small volume, enclosed environment, and simple preparation render them suitable microreactors in industrial applications and processes such as cell culture, material synthesis, and blood coagulation. Extensive application contexts request precise and highly efficient manipulations of these non-wetting droplets. Many external fields, including magnetic, acoustic, photothermal, and pH, have emerged to prepare, deform, actuate, coalesce, mix, and disrupt these non-wetting droplets. Electric fields are rising among these external stimuli as an efficient source for manipulating the LMs with high controllability and a significant ability to contribute further to proposed applications. This Feature Article attempts to outline the recent developments related to LMs with the aid of electric fields. The effects of electric fields on the preparation and manipulation of LMs with intricate interfacial processes are discussed in detail. We highlight a wealth of novel electric field-involved LM-based applications and beyond while also envisaging the challenges, opportunities, and new directions for future development in this emerging research area.

Effect of particle size on the stripping dynamics during impact of liquid marbles onto a liquid film

The robust attachment of particles at fluid interfaces is favorable for engineering new materials due to the large capillary energy, but it meets significant challenges when particle removal is a requirement. A previous study has shown that soap films can be utilized to achieve particle separation from liquid marbles. Here, we investigate the effects of particle size on the particle separation from liquid marbles using fast dynamics of drop impact on a soap film. Experimental observations disclose that the fast dynamics of the liquid marble involves coalescence, bouncing, stripping, or tunneling through the film by controlling the falling height and drop volume. More importantly, the active regime of the stripping mode can be selective-controlled by tuning the particle size, and the smaller stabilizing particles make a wider stripping regime. This is attributed to the smaller change of the surface energy resulting from the larger surface tension of LMs wrapped by smaller particles. Theoretical analysis reveals that the stripping thresholds are determined by the energy competition between kinetic energy, the increased surface energy and viscous dissipation, which offers important insights into particle separation by tuning the particle size. The present study provides guidelines for applications that involve phase separation.

Oscillation-Induced Mixing Advances the Functionality of Liquid Marble Microreactors

Droplet-based microreactors often uncover fascinating phenomena and exhibit diverse functionality, which make them applicable in various fields. Liquid marbles (LMs) are non-wetting droplets coated with particles, and these features highlight their potential as microreactors. However, sophisticated experimental designs are typically hindered because it is difficult to obtain sufficient substance mixing in these miniature, damage-prone, self-supporting liquid containers. Here, we demonstrate that subjecting LMs to vertical oscillations by audio signals represents a controllable approach that allows sufficient mixing with variable dynamic modes. The characteristics and key issues in LM oscillation are systematically explored. The effects of oscillation on application potential are examined. Under oscillation conditions, homogeneous mixing can be achieved within a few seconds in LMs consisting of either water or viscous liquids. Importantly, the structures of materials synthesized in LMs can be regulated by modulating the oscillation modes. The variable modes, flexible adjustability, high efficiency, and wide applicability of this oscillation method make it a verified manipulation strategy for advancing the functionality of LM microreactors.

Locomotion of a Nonaqueous Liquid Marble Induced by Near-Infrared-Light Irradiation

Micrometer-sized hydrophobic polyaniline (PANI) grains were synthesized via an aqueous chemical oxidative polymerization protocol in the presence of dopant carrying perfluoroalkyl or alkyl groups. The critical surface tensions of the PANIs synthesized in the presence of heptadecafluorooctanesulfonic acid and sodium dodecyl sulfate dopants were lower than that of PANI synthesized in the absence of dopant, indicating the presence of hydrophobic dopant on the grain surfaces. The PANI grains could adsorb to air-liquid interfaces, and aqueous and nonaqueous liquid marbles (LMs) were successfully fabricated using liquids with surface tensions ranging between 72.8 and 42.9 mN/m. Thermography studies confirmed that the surface temperature of the LMs increased by near-infrared light irradiation thanks to the photothermal property of the PANI, and the maximum temperatures measured for nonaqueous LMs were higher than that measured for aqueous LM. We demonstrated that transport of the LMs on a planar water surface can be achieved via Marangoni flow generated by the near-infrared light-induced temperature gradient. Numerical analyses indicated that the LMs containing liquids with lower specific heat and thermal conductivity and higher density showed longer path length per one light irradiation shot and longer decay time. This is because generated heat could efficiently transfer from the LMs to the water surface and larger inertial force could work on the LMs. The LMs could also move over the solid substrate thanks to their near-spherical shapes. Furthermore, it was also demonstrated that the inner liquids of the LMs could be released on site by an external stimulus.

Liquid marble-based digital microfluidics - fundamentals and applications

Liquid marbles are droplets with volume typically on the order of microliters coated with hydrophobic powder. Their versatility, ease of use and low cost make liquid marbles an attractive platform for digital microfluidics. This paper provides the state of the art of discoveries in the physics of liquid marbles and their practical applications. The paper first discusses the fundamental properties of liquid marbles, followed by the summary of different techniques for the synthesis of liquid marbles. Next, manipulation techniques for handling liquid marbles are discussed. Applications of liquid marbles are categorised according to their use as chemical and biological reactors. The paper concludes with perspectives on the future development of liquid marble-based digital microfluidics.

Elemental Sulfur-Stabilized Liquid Marbles: Properties and Applications

Sulfur-stabilized liquid marbles were readily prepared by rolling water droplets on a sulfur (S₈) powder bed. Because of the construction of a gel layer on the surface of liquid marbles, the resulting liquid marbles have shape-designable characteristics. The effects of rolling time and volume of droplets on the deformability of sulfur-stabilized liquid marbles were investigated along with their mechanical stability and lifetime. The capability of sulfur-stabilized liquid marbles to be deformed at different pH values enables these liquid marbles to act as microreservoirs with desired shapes for aqueous solutions. Immersing the sulfur-stabilized liquid marbles into organic liquids leads to an increase in the liquid marbles' lifetime, and thereby they can survive at the interface of aqueous-organic two-phased systems for a long time. Finally, the applications of sulfur-stabilized liquid marbles as photocatalytic microreactors, electrochemical microcells, and monodisperse Pickering-like emulsions were demonstrated.

Liquid Marbles as Miniature Reactors for Chemical and Biological Applications

The need for miniaturised reaction systems has led to the development of various microreactor platforms, such as droplet-based microreactors. However, these microreactors possess inherent drawbacks, such as rapid evaporation and difficult handling, that limit their use in practical applications. Liquid marbles are droplets covered with hydrophobic particles and are a potential platform that can overcome the weaknesses of bare droplets. The coating particles completely isolate the interior liquids from the surrounding environment, thus conveniently encapsulating the reactions. Great efforts have been made over the past decade to demonstrate the feasibility of liquid marble-based microreactors for chemical and biological applications. This review systemically summarises state-of-the-art implementations of liquid marbles as microreactors. This paper also discusses the various aspects of liquid marble-based microreactors, such as the formation, manipulation, and future perspectives.

Liquid Plasticine Integrated with Isoelectric Focusing for Miniaturized Protein Analysis

Developing miniaturized and rapid protein analytical platforms is urgently needed for on-site protein analysis, which is important for disease diagnosis and monitoring. Liquid marbles (LMs), a kind of particle-coated droplets, as ideal microreactors have been used in various fields. However, their application as analytical platforms is limited due to the difficulty of pretreating complex samples in simple LMs. Herein, inspired by the microfluidic chip, we propose a strategy through fabricating fluid channels using deformable LM, termed liquid plasticine (LP), to achieve sample pretreatment function. Through combining isoelectric focusing (IEF) with an LP channel, an LP-IEF platform with simultaneous protein separation and concentration functions is realized. The pretreatment capability of the LP-IEF system for proteins in physiological samples is proven using standard proteins and human serum with the results of a clear separation, 10-fold concentration, and a resolution of 0.03 pH. Through cutting the LP after IEF to LMs and transiting isolated LMs containing target proteins for further downstream colorimetric and mass spectrometry measurements, the quantitative analysis of clinical microalbuminuria and identification of α-1-microglobulin/bikunin precursor in clinical diabetic urine samples are achieved. This work proposes a strategy to develop LMs/LPs as a multifunctional integrated analytical platform and the miniaturized LP-IEF device as a rapid protein analytical platform.

Mechanical robustness of monolayer nanoparticle-covered liquid marbles

Powder-derived liquid marbles (LMs) are versatile nonwetting systems but are confronted with many limitations in application, as their surface particles are usually large and agglomerated. Recently, sol-gel film-derived LMs have come on the scene that are termed monolayer nanoparticle-covered (mNPc) LMs based on their unique characteristics, revealing great application potential but also generating many questions. Here, mechanical robustness, a very important yet to be addressed property, of mNPc LMs was systematically studied. Rolling, pendant contact, and compression experiments were designed using bare and coated glasses with water contact angles (WCAs) ranging from 23° to 157°. With rupture as a quality criteria, the mechanical robustness of mNPc LMs enhanced with the hydrophobicity of solid surfaces that exerted pressure on them, but maintained much weaker than typical powder LMs until the solid surface was superhydrophobic. In particular, when contacting hydrophilic surfaces of WCAs ≤53°, an mNPc LM did not have the capacity for nonwetting and ruptured immediately, even if the pressure approached zero. This was distinct from powder LMs and indicated that a particle shell as thin as ∼20 nm could not prevent intermolecular attractions between the internal liquid and external solid surface. An interface scenario consisting of solid surface microroughness was proposed to address this issue. On the other hand, mNPc LMs remained unruptured on superhydrophobic surfaces but presented degraded elasticity under extreme compression. Uncovering these properties could be of much help for developments of mNPc LMs and their counterparts, the mNPc liquid plasticines.

Liquid marbles from soot films

Soot films are the most easily available superhydrophobic surfaces. However, their cohesive forces are very weak such that they have been considered not suitable for direct use. Here we show that the seemingly undesirable mechanical weakness is actually an important property which allows a soot film to work as a superhydrophobic platform and tool, producing liquid marbles with fascinating properties and performances. A soot film is weak enough to lose component carbon nanoparticles (CNPs) on contact with water, but can adhere to a substrate stably on overturning or shaking the substrate. On this basis, we demonstrate that a liquid marble consisting of a liquid core and a CNP shell can be obtained by either rolling or an imprinting process. In addition, it is found that large-volume liquid puddles are easy to produce and manipulate with soot films by arbitrary shaking and pouring operations, without worrying about particles flying off that would occur in conventional powder-based liquid puddle production. The multifunctionality of CNPs endows soot liquid marbles/puddles with great potential in light shielding, electrical conduction, etc. This study reveals a direct application of soot films' superhydrophobicity, provides an alternative route for liquid marble production, and highlights the concept of disadvantage reversion.

Liquid marbles and liquid plasticines with nanoparticle monolayers

Liquid marbles, as particle-covered macroscopic liquid drops in an air environment, have exhibited great value as self-standing liquid containers in various areas, such as material synthesis, chemical analysis, and cell culture. However, conventional liquid marbles obtained by the rolling-on-powder-bed method usually feature micron-sized or larger particle agglomerates, which harm marble transparency and fine control of marble shape and thus results in considerable limitations for marble applications. Recently, monolayer nanoparticle (NP) coverage has been achieved using a sol-gel film instead of a powder as the particle source. The NP monolayer structure can not only result in highly transparent liquid marbles with very smooth and symmetrical profiles, but can also lead to liquid entities with arbitrarily designable shapes, as called liquid plasticines. Monolayer NP-covered (mNPc) liquid marbles and plasticines have generated important results in both fundamental and practical applications, as ideal physical models or advanced self-standing containers, showing great advantages in some conditions over conventional powder-derived liquid marbles. In this review, the preparations and current applications of the two mNPc systems are summarized and perspectives on their advantages, unclear issues, and application extension are provided.